WIRELINE SUB-SURFACE SAFETY SYSTEM - Botil Oil Tools India …botilindia.com/Sub-Surface Safety...
Transcript of WIRELINE SUB-SURFACE SAFETY SYSTEM - Botil Oil Tools India …botilindia.com/Sub-Surface Safety...
WIRELINE SUB-SURFACE SAFETY SYSTEM__________________________________________________
BOTIL MODEL ‘BHE’ WIRELINE –RETRIEVABLE SURFACECONTROLLED SUB-SURFACESAFETY VALVEProduct No. BI 806 - 22
The Botil Model ‘BHE’ Wire line –retrievable surface controlled subsurfacesafety valve is a flapper type selfequalizing safety valve, and is availablein 5,000 to 10,000 psi working pressurevariants. The safety valve is equippedwith BRQ lock, which provides positivelocation while installation. The BRQ lockis also suitable for high pressureapplication.
Features: API Q1 and API 14A quality
system ensure design andmanufacturing integrity.
The number of pressureseals/potential leak paths isminimized.
The number of connection isminimized.
The non-elastomeric seal on theO.D of Lock Mandrel and SafetyValve can withstand hightemperature and pressure. Theseals are also resistive toabrasion.
The flapper has primary metal tometal seal mountedeccentrically whichprovides large bore.
SPECIFICATIONS GUIDEParameters Design Specifications
Size 4-1/2”12.6ppf or 5”x 3.813”
5-1/2”x
4.313”
5-1/2”x
4.562”
7” x5.963”
Lock No-GoO.D
3.937” 4.410” 4.687” 6.100
Safety ValveO.D
3.802” 4.300” 4.552” 5.953”
Fish neck I.D 3.125” 3.875” 4.000” 5.375”Min.Bore 2.380” 2.500” 2.850” 3.750”Over alllength
80” 80” 83” 87”
WorkingPressure
5000 - 10000 Psi
Fail-SafeSettingDepth
1000 ft
OpeningPressure atzero HydroStaticPressure
1000 Psi 1200Psi
1000 Psi
Control linepressure tohold SSSVopen afterinitial open
1000 Psi + Flowing Pressure
Closingpressure atzero HydroStaticPressure
300~400 Psi
100
WIRELINE SUB-SURFACE SAFETY SYSTEM____________________________________________________
SUB-SURFACE SAFETY VALVE
101
WIRELINE SUB-SURFACE SAFETY SYSTEM____________________________________________________
BOTIL DUMMYVALVE/SEPARATIONSLEEVEPROD. No. BI 806-24
Dummy valve/Separation Sleeve haveapplication of separating control linefrom tubing string when installed inlanding nipple instead of SSSV, to avoidpressure leakage thru ported nipple.
An Otis Type XN RN, Landing Nippleprofile is featured in the Dummyvalve/Separation Sleeve and polishedpack-off area to install blanking plug toplug production tubing.
SPECIFICATION GUIDE
SEPERATION SLEEVE
Size 4-1/2”12.6ppf ,or
5” x3.813”
5-1/2”x
4.313”
5-1/2”x
4.562”
7” x5.963”
Profile XN XN XN RNSealBore
1.875 2.313 2.750 3.688
102
WIRELINE SUB-SURFACE SAFETY SYSTEM____________________________________________________
BOTIL SAFETY VALVELANDINGNIPPLEPROD. No. BI 806-23
Safety valve landing nipple is a portednipple having 1/4” NPT control lineconnection. The landing nipple has twosealing bores. The upper bore is largerthan lower bore which facilitates easypassage of lower seal unit of SSSVduring running in. The nipple has BRQTop No Go profile which facilitatespositive location of SSSV in landingnipple.
SPECIFICATION GUIDE
PORTED LANDING NIPPLE
Description SIZES
4-1/2”12.6ppf, or
5” x3.813”
5-1/2”x
4.313”
5-1/2”x
4.562”
7” x5.963”
A( UpperSeal Bore)
3.875” 4.345” 4.600” 6.000”
B(LowerSeal Bore)
3.813” 4.313” 4.562” 5.963”
Max. O.D 5.860” 6.650” 6.650” 8.300”
THD.Connection
4-1/2”12.6#OR 5”NewVam
5-1/2” NewVam
7”NewVam
103
WIRELINE SUB-SURFACE SAFETY SYSTEM_________________________________________________
BOTIL RUNNING TOOLProduct No. BI 811-10
BOTIL Model ‘BRQ’ Running Tool is used torun ‘BRQ’ Lock Mandrel in Top No-GoLanding Nipple.
SPECIFICATION GUIDE
RUNNING TOOL
Description SIZES3.813” 4.313” 4.562” 5.963”
A ( Fishneck)
2.312” 3.125”
Will latch ininternalfishingneck
3.125” 3.875” 4.000” 5.375”
Max. O.D 3.802” 4.250” 4.500” 6.000”
THD.Connection
1.062-10 N
104
WIRELINE SUB-SURFACE SAFETY SYSTEM__________________________________________________
BOTIL RUNNING PRONGPROD. BI 811-92
Running prong is used with running toolto keep flapper of SSSV in openposition while running in.
RUNNING PRONG
BOTIL PULLING PRONGPROD. No.811-93
Pulling prong is used with pulling tool toOpen flapper of SSSV for equalizing ofpressure above and below for easyretrieval.
PULLING PRONG
100
105
WIRELINE SUB-SURFACE SAFETY SYSTEM__________________________________________________
BOTIL FLUTED CASING SUBPRODUCT NO. BI 299-70
The BOTIL Fluted Casing Sub facilitateseasy passage of control line outside thecasing O.D
SPECIFICATION GUIDE:Size I.D O.D LENGTH
4 1/2 4.000 5.670 18”OR16”
Approx..
5 4.408 5.670
7 6.184 8.250
100
106