Wireless repeater（wl r-a）

Wireless Repeater User Manual

1

Copyright notation ©2011 Nanjing IOT Sensor Technology Co., Ltd All Rights Reserved.

Wulian, are the trademarks and registered trademarks of Nanjing IOT Sensor Technology Co., Ltd. The other products mentioned in this article or company names may be the trademark or trade name of their respective owners.

Before installing and using the products, please read user manual carefully, which will help you use the products better. The pictures in the manual are just for your information. If some pictures are different from material object, the material object is final. The content in the manual is protected by copyright law legislator. It strictly prohibits any forms of copying, passing, distributing and storing any content of the manual without prior, written, consent of the instructor of Nanjing IOT Sensor Technology Co., Ltd. When using, if the practical situation of the product is different from that in the manual, or if you want to get more information, or you have any questions or ideas, please contact us as below: Service telephone: +86-25-5226 9091 Service website: http://www.wulian.cc/english/


2

Ⅰ. Product Introduction WL-R-A Wireless Repeater is a new type of function equipment to assist IOT Internet communication gateway and to expand covering area.

It is mainly used for the diffusion of wireless network signal and area covering so that the family wireless network can run smoothly.

Ⅱ. Function Features Support ZigBee HA protocol ZigBee equipment type: Repeater Wireless connection, free of cable Enhance wireless signal, expand covering area of the network Effective covering distance: 1 Km Able to be mobile, safer and more reliable User-friendly design, able to play immediately after being plugged


3

Ⅲ. Function Presentation

Main part

LED indicator

Antenna

Multi-functional button SET

Base

Plug


4

Ⅴ. Use Guidance 1. Networking Setting

(1) This product can be used as common repeater or used with WL-GW-A Wireless Gateway together;

(2) Quickly click 【multi-functional button】four times to join ZigBee network;

Single quick click time is within 1 second

LED green light turns on for 2 seconds then light out


5

(3) Quickly click【multi-functional button】once, repeater allows other equipments to join the network for 4 minutes;

(Remark: this function is optional)

(4) Quickly click【multi-functional button】twice, repeater does not allow other equipments to join the network;

(Remark: this function is optional)


LED red light flashes twice


LED red light flashes 4 times


6

(5) Press 【multi-functional button】for 10 seconds, recover factory setting.

(Recovering factory setting defaults not joining ZigBee network)

2. Download software (1) Please select relevant operating software according to different mobile intelligent terminals: a) Android users please search“wulian” in“Google Play Store”, selecting“Smart Home”to download; b) IPhone users please come to“APP Store”to search“smart home”, selecting“smart home”to download; c) Pad users can visit the official websitehttp://www.wulian.cc directly to download. (2) Install and operate according to the indication of various versions of software; (3) Installation finished, enter setting and use stage; (4) This product also supports computer operation according to customers' requirements.

Multi-functional button

LED green light flashes 4 times continuously


7

3. How to use (1) The setting and use of this product need to be finished through software operation; (2) As for specified operation steps, please refer to various versions of use guidance; (3) Setting finished, users can control the switch of this product through mobile smart terminal.

Ⅵ. Note Installation If it is the first time to install, please read use guidance carefully before installation. Cleaning This product should be installed in a clean and dry place to avoid humidity or other material entering internal components which will influence its work. When the surface is stained with dust, dry it with soft cloth, cleaning fluid with corrosive composition and other chemical solvent are forbidden. Storage Those products packed in boxes should be placed in the location where is dry, free of corrosive gas and available to air. The height of pile should be no more than 10 layers, store temperature should be between -10℃～+40℃ with humidity ≤75%. Transportation Those products packed in boxes can be transported with any kind of transport means, if the direct influence of rain, snow, and severe impact is avoided.


8

After-sales service If product breaks down, non-professionals shouldn’t open it and it should be sent to local maintenance station to maintain or you can directly contact with our customer service department.

Ⅶ. Product Specification

Communication means IEEE802.15.4（ZigBee）

Communication distance 1000m (Visible condition)

Transmit power MAX 19 dBm

Receiver sensitivity -90 dBm

Power requirements 220V

Working temperature -10℃~+55℃

Weight 150g

Net weight 90g

Color white, grey

Ⅷ. Products in Box

Components Quantity

Wireless repeater 1

Instructions 1


9

Ⅸ. Ordering Information

Goods No. WLPN1201232

Type WL-R-A

Package size 140×120×40mm

Wireless repeater（wl r-a）

Documents

Transcript of Wireless repeater（wl r-a）