Wireless Bluetooth Keyboard & Mouse Combo

KAWKMBTAPLA

Thin and stylish, the Wireless Bluetooth Keyboard and Mouse Combo offers a fashionable alternative

to the clunky keyboard and mouse presently on your desk. In connecting to your computer via

Bluetooth, this keyboard and mouse combo helps you clear the cord clutter and focus on the essentials.

Product Checklist

The following items are included:

- Full-sized wireless keyboard and mouse.

Wireless Bluetooth Keyboard

Product Features

- Built-in wireless Bluetooth 3.0 keyboard.

- Modern style with numeric keypad.

- 104 keys.

- Battery Powered (2 x AAA batteries)

- Energy-saving sleep mode

Specifications

- Bluetooth 3.0 interface

- Operating distance of up to 32ft.

- Modulation voltage:3.0-5.0v.

- Working current:＜5.0mAh

- Standby Current:2.5mAh

- Sleeping Current:＜200uA

- Standby time: 60days

- Uninterrupted Working time: 90hours

- Key strength: 0.17+0.02Ibs

- Key Life: 5 million strokes.

- Operating temperature;-50+131F.

Getting Started

Step 1: Install the batteries. Once the batteries are correctly installed, the power indicator will light up.

Step 2: Press the keyboard's 'connect' button until the LED of the 'Num Lock' key begins to flash. This

will indicate that the keyboard is ready to be connected to a device.

Step 3: Turn on your device.

Step 4: Locate your Bluetooth settings within the Control Panel of your operating system. Enable

Bluetooth connection. Your operating system will automatically search for a Bluetooth-enabled device.

Step 5: The wireless keyboard will be detected as a Bluetooth-enabled device. Follow the on-screen

instructions and click on the relevant buttons to install the keyboard.

Step 6: Enter/set a password when prompted.

Step 7: If the installation of the keyboard has been successful, the keyboard's power indicator light will

remain illuminated until the device is switched off.

NOTE:

- If your device is without Bluetooth functionality, an extra USB Bluetooth dongle should be used to

connect the Bluetooth Keyboard.

- iOS4.0 is a minimum requirement for the wireless keyboard to function. Please research device

compatibility before attempting to connect to the keyboard.

- There are three LED indicators for this keyboard. Bluetooth and the 'Num Lock' key share an LED,

whereas the 'low power' indicator and the 'Caps Lock' key share a seperate LED. The third LED is

reserved for the keyboard's 'Scroll Lock' function.

Energy-saving Sleep Mode

The keyboard will engage sleep mode when it is inactive for 30 seconds. The keyboard power light will

go off, indicating that sleep mode has been initiated. To reactivate the keyboard from sleep mode, just

press and key and wait 3 seconds, the keyboard will come back on.

Safety Caution

i. Keep the keyboard away from sharp objects.

ii. Do not place heavy objects on top of the keyboard.

iii. Do not microwave the keyboard

iv. Do not force or distort the keyboard.

v. Keep the keyboard away from oil, chemicals and any liquids.

Cleaning

You can clean the keyboard with water, alcohol or alcohol based disinfectant.

Troubleshooting

Unable to Connect

- Make sure the keyboard has power

- Make sure the keyboard is within the operating distance.

- Make sure the wireless keyboard has been paired with the device.

Special Keys

You can use the FN key with the F1-F12 and insert keys to operate multimedia loaded onto the device.

Wireless Bluetooth Mouse

Before using the Bluetooth Mouse, please ensure the battery is installed properly. Note: if your device

has no Bluetooth functionality, please install a Bluetooth dongle before attempting to use the wireless

mouse.

Step 1: Locate the Bluetooth settings screen within your chosen device. Enable Bluetooth connectivity.

Step 2: Hold down the left button + the scroll button + the right button of the mouse simultaneously for

five seconds, then release. The mouse will enter into 'pairing mode'. Your device will now attempt to

connect with the mouse.

Step 3: Once the Bluetooth mouse is detected, select it and follow the prompts. You may be prompted

to choose a password.

Step 4: Your device will install the Bluetooth mouse automatically. At the end of this process, the

mouse will be successfully connected.

WARNINGS / DISCLAIMERS

- Do not expose either device to moisture or sunlight. Doing so will affect normal operations and, in

some extreme cases, endanger the user.

- Do not disassemble either product.

- Any misuse of either product will void warranty. In the event of product misuse, Kogan will not be

responsible for damage or injury.

- If you believe either product has malfunctioned or requires repair, please refrain from attempting to

repair products yourself. Refer all servicing matters to qualified personnel, or contact the Kogan

Customer Support Team.