Wire edm | die sinker edm - MIKRON HPM 600U …...EDM can be used to machine conductive materials of...
Transcript of Wire edm | die sinker edm - MIKRON HPM 600U …...EDM can be used to machine conductive materials of...
EN
MIKRON HPM 600UHPM 800U
2
The HPM machines are intended forthe universal production of high-quality parts with 3, 4 or 5 axes.
State-of-the-art motor spindles,directly driven circular and swivellingaxes and stable construction providethe ideal conditions for economicaland accurate machining with moderntools.
3
Contents Applications 4
Highlights 6-7
Table Variants 8
Chip Management 12
High-tech Spindles 13
Tool Magazine 14
Options 16
smart machine 17
About GF AgieCharmilles 18
MIKRONHPM 600U
MIKRONHPM 800U
The machines are designed for use in the field of fully automated and simultaneous HPM (High Performance Machining).
4
Forging die for crankshaftAlloyed steel for tools.Automotive industry• Material that is difficult to remove• Heavy tools• Molding accuracy• Outstanding machine stability• High-performance spindles
Turbine and compressor platesDurable steels that are resistant to extremely high temperatures.Aviation• High stability and precision• Very good surface qualities• Absolute process consistency
Applications Broad range of parts...
Impellers InconelPower generation• Dynamic 5-axis simultaneous
processing• Quick and efficient control• Highly efficient at heavy roughing• Rapid finishing operations
That direct drives in the 4th and 5thaxis ensure the highest possibledemands on the circular swivellingaxes while getting up to 500 kg are amatter of course.
5
6
Highlights The MIKRON HPM 600U and HPM 800U can be used for anything from heavy roughing to precise finishing operations
Scratch-resistant safetyglass
Dual drive in the Y-axis for dynamics and stability
Fully protective cabinfor clean working
conditions
Dynamic and stable.Circular swivelling table with water-cooled directdrives. Increased stability for maximum tool life with 3 axis clamps.
Thermal insulation for constant precision
Stainless steel axis covers
Double-walled safetydoor with large window
All tools clearly visible at all times
Additional tool storage
2 chip conveyors
Reliable recognition ofoversized tools
Quick to clean due to fold-out magazine base
Oil spray extractionfor cleaner air
Extremely compactconstruction
Other highlights• Optimum service access to all
components due to easy-to-openside casings
• Clear distinction between serviceand user access
• The linear measuring systems areprotected against soiling throughexcess air pressure.
Various modules of the smartmachine modular system ensure anoptimum process: increasedaccuracy, enhanced surface qualityand molding precision as well asincreased safety, which is particularlyimportant for unmanned operations.
All axes with directmeasuring systems
7
Outstanding accessibilityPopular with users because of theiroutstanding flexibility and accessi-bility. Smaller parts can be effort-lessly loaded and secured in place byhand on the 100% simultaneouslyoperable, rotary tilting table.
Digital Heidenhain control systemWith the latest generation of theHeidenhain iTNC 530 and a clearlylaid out operator desk, the MIKRONHPM 600U and HPM 800U are pro-cess-consistent and user-friendlymachining centers:
• Process consistency including rapidinduction and safe operation ofpredefined work cycles
• Ethernet connection for rapid CAMdata flow
• Easy dialog-controlled programming• Parallel programming, unrestricted
contour programming, freelydefinable sub-programming
Optimum chip managementGreat attention has been paid to theflow of chips in the working area.Sharply inclining side walls direct thechips reliably into the machine bed.The chips are then transported on twospiral chip conveyors to a highlyefficient ascending conveyor with afine filter.
ErgonomicsThe doors can be opened out wide toenable unrestricted access to theworking area. The viewing screen ofglass offer a unrestricted view of themachining process. Whatever optionsthe MIKRON HPM is fitted with,maximum accessibility is alwaysensured. The work table, pallet andtool magazine, and chip removal areeasily accessible, as are the mainten-ance units.
Naturally, the work table can beloaded by crane.
8
Tischvarianten Rundschwenktisch mitT-Nuten-Tischplatte
Table Variants Four different work tables
Four different work tablesPopular with users because of theiroutstanding flexibility and accessibility.Smaller parts can be effortlesslyloaded and manually secured in placeon the 100% simultaneously operable,circular swivelling table.
Highlights• Direct and easily accessible
measuring systems • A and C-axes with water-cooled
direct drives• A-axis has clamps on both sides• C-axis with clamps• Loads:
Vertical 800 kg (3-axis oper.)Simultaneous 500 kg (5-axis oper.)
50(1.97")
91°
121°
90°
30°
18°
800 Y (31.50")
650Y (25.59")
595(23.43")
100
(3.9
4")
550
Z (2
1.65
")
Spindle
Work table121° rotation
Maximum work piece size
Two chip conveyors
Ø 630 mm
500 mm
Ø 500 mm
View from above into the working areaof the MIKRON HPM 800U.
9
Contact
Mikron Agie Charmilles AGIpsachstrasse 16CH-2560 Nidau
Tel. +41 (0)32 366 1111 Fax +41 (0)32 366 11 [email protected]
Achieve more...
MIKRON HPM 600U
MIKRON HPM 800U
MIKRONHPM 600UHPM 800U
12
Tischvarianten Rundschwenktisch mitT-Nuten-Tischplatte
Chip management
...and unrestricted access to the working area
Optimum chipclearance due to
steep, smoothcabin walls
Two chip conveyors for large chip volumes
High-performance chip conveyor
Washer jets in all four corners
prevent chipaccumulation
Practical chip cart Machines with chip conveyor and bandfilter (optional) form a compact unit
13
Hightech Spindles
Tool spindles for demanding machining
The tool spindles built into theMIKRON HPM series have beenpurposefully designed to meet highperformance expectations. The resultis performance and torque even athigh speeds.
smart machine APS (Advanced Pro-cessing System) for reliablemeasuring and display of millingvibrations and ITC (Intelligent ThermalControl) for higher workpieceprecision.
Whichever machine configuration youchoose, with a MIKRON HPM you getthe most state-of-the-art tool spindletechnology: vector control for fulltorque in the lower speed range,highly stable ceramic hybrid spindlebearing, and spindle casing coolingusing a controlled coolant system forconsistent temperatures for the entireduration of the work.
The complexly developed inline toolspindles from StepTec are designedwith high torques for the removal oflarge chip volumes. This spindle par-ticularly stands out due to its easy-to-maintain construction and automatic-ally oil/air lubricated ceramic hybridbearing system.
15,000 min-1 or 20,000 min-1
• Precise high performance for use inthe HPC field
• Available with or without internalcoolant supply
• ISO-40 spindle taper (15,000 min-1)• HSK-A63 spindle taper
(20,000 min-1)• Spindle module and motor replace-
able separately
14
Tool Magazine Rapid tool provision
Tool magazine for 60 tools. Simultaneous access to approx. 10 toolbags accelerates the rate at which toolsare supplied
All tools visibleThe entire front of the tool magazineis made of glass so that all of thetools are visible. Damaged tools canbe quickly identified and replaced. Iftools are required on other machines,you can see straight away where eachtool is.Access to up to 10 tool locations permagazine movement facilitates andconsiderably reduces the placementtime.
Smooth and swiftThe magazine chain is moved andpositioned by a controlled drive. Thetools therefore glide swiftly andsmoothly to the changing position.This means that tools can be madeavailable much more quickly.Vibrations that could have a negativeimpact on the milling process are alsoprevented.
The storage compartmentmakes it easier for tools tobe loaded and unloaded, asthey can be depositedoutside the tool magazine.
Contour templateTools that exceed the maximumdimensions are reliably identified.
Length controlTools that are too long may beinserted, but the magazine door willnot close.
Tools that are placed back inthe tool magazine after themachining process are oftencoated with chips andemulsion. The residuescollect on the magazinefloor. This can be foldeddown for easy cleaning.
HSK A63• 80/140 mm diameter
Fully engaged/partially engaged• Max. length 350 mm
15
16
Options The MIKRON HPM 600U and the MIKRON HPM 800U are geared up for a multitude of options. They can be simply and optimally configured
Band filter system
Infrared touch probe
Signal light
Minimum quantity coolinglubrication
Mist extraction
Operating mode 3+4
Laser measuring system Trough-spindle cooling
External coolant supply Flushing nozzles system
Automatic cabin roof
Rinsing pistol
Rotating viewing window
smart machine
17
smart machine The new dimension in modern production
Bringing intelligence into the millingprocess is the intended aim of "smartmachine". This includes a range of modules thatare collectively referred to under thegeneric term "smart machine" andthat fulfil various functions. In order tomake the milling process "intelligent",various requirements have to be im-plemented. First of all, establishing comprehen-sive communication between man andmachine, which makes preciseinformation that the operator requiresto assess the milling process availableto him. Secondly, supporting theoperator in the optimisation of theprocess, which considerably improvesthe performance. Thirdly, the machineoptimises the milling process, whichimproves the process safety and thequality of the workpiece - above all inunmanned operation.
The facts• Greater accuracy in shorter
machining times• Increase in the workpiece surface
quality as well as the surface andshape accuracy
• Recognition of critical machiningstrategies
• Improvement in the process safety• Reduction of the hourly rate due to
longer service life• Higher availability• Better operating comfort• Considerable increase in reliability
in unmanned operation
smart machine construction kitsystemEach of the modules fulfils a specifictask. Just like in a construction kit,the user can select the modules thatseem to him to be the best option forimproving his process.
Your benefit Producing the workpieces in a pro-cess-secure and precise manner,increasing the reliability in unmannedoperation, increasing the service lifeof the machine and significantlyreducing production costs.
The smart machine is constantlybeing developed further.
The currently available modules canbe found at www.gfac.com
18
About GF AgieCharmilles
Milling
EDM
Automation
Spindle
Service
High-Speed and High-Performance Milling Centers
In terms of cutting speed, HSM centers are 10 times faster thanconventional milling machines. Greater accuracy and a better surfacefinish are also achieved. This means that even tempered materials canbe machined to a condition where they are largely ready to use. Oneessential advantage of HSM is that with systematic integration, theprocess chain can be significantly shortened. HSM has developedalongside EDM into one of the key technologies in mold and tool making.
Electric Discharge Machines
EDM can be used to machine conductive materials of any hardness (for example steel or titanium) to an accuracy of up to one-thousandth of a millimeter with no mechanical action. By virtue of these properties,EDM is one of the key technologies in mold and tool making. There aretwo distinct processes -- wire-cutting EDM and die-sinking EDM
Tooling, Automation, Software
Tooling for fixing workpieces and tools; automation systems and systemsoftware for configuring machine tools and recording and exchangingdata with the various system components.
HSM Spindle Technology
Development, production and sale of the motor spindles that form thecore components of modern HSM centers. The spindles rotate at speedsbetween 10,000 and 60,000 rpm.
Services and Consumables
Service, maintenance, spare parts and consumables for EDM, millingand HSM systems as well as for other machine tools; consumablesinclude filters, wire, graphite, copper electrodes and special resin.
Contact
www.gfac.com
Achieve more...
Our
con
stru
ctio
ns a
re c
ontin
uous
ly a
dapt
ed to
mee
t the
cur
rent
req
uire
men
ts.
Alt
erat
ions
can
be
mad
e at
any
tim
e. T
he in
form
atio
n in
this
pri
nt is
non
-bin
ding
.
333.
300.
135
Achievemore...
We commit our-selves to a promise.That promise is“Achieve more.” It’s a commitmentto create the rightconditions for ourcustomers to obtaincompetitive results.When our customerswin, we win.
Technical dataMIKRON HPM 600UMIKRON HPM 800U
MIKRON MIKRONHPM 600U HPM 800U
Working rangeLongitudinal X mm 650 800Cross Y mm 650 800Vertical Z mm 550 550A-axis mm +91/-121° +91/-121°C-axis mm n x 360° n x 360°Number of simultaneous axis pce. 5 axis/5 simultaneous 5 axis/5 simultaneous
Feed DrivesFeed rate Rapid traverse X, Y, Z m/min 45 45
A,C °/sec 150, 210 150, 210
Working spindleWorking spindle 20,000 Spindle power 40% ED kW 39 39
HSK A63 Spindle torque 40% ED Nm 84 84
Accuracy XYZ ISO 230-2(97)Accuracy A μ 8 8Repeatability R μ 5 5
Work tableClamping surface mm Ø 500 / Ø 630 Ø 500 / Ø 630Max. workpiece weight kg 500/800 500/800
AutomationTool magazine Positions 30, 60 30, 60Laser tool measurement Option OptionInfrared touch probe Option Option
WeightMachine weight kg 15,000 15,000
OptionsAutomatical cabine roof • •Coolant sump, chip conveyor • •Minimum-quantity cooling lubrication • •Mist extraction unit, etc. • •
Ancillary servicesProgramming courses • •Technology courses • •Service training courses • •
Achieve more...
333.
300.
135
Our
con
stru
ctio
ns a
re c
ontin
uous
ly a
dapt
ed to
mee
t the
cur
rent
req
uire
men
ts.
Alt
erat
ions
can
be
mad
e at
any
tim
e. T
he in
form
atio
n in
this
pri
nt is
non
-bin
ding
.
www.gfac.com
Air
4800
077
2545
1201
2216
5600
max. 3475
R 911
R 988
3192
899
3519
5223
R 839
R 604
293 261
600
Weg
=
850Weg=
900
1780
575
770
258
(31.50")800
X
650X (25.59")
550
(21.
65")
Z
800(31.50")Y
50 (1.9
7")
91°
121° 90°
R560
(22.05")
100
(3.9
4")
650(25.59")Y
50 (1.9
7")
R56
0(22
.05")
860(33.86")O
1014(39.93)O
346 l15°
MAX. WORKPIECE