All window treatment control solutions are custom-designed based on application.Call us at (800) 282-8864 or email shades@worthdist.com for pre-sales support.

We offer competitive pricing for any job, so contact us for a free quote.www.worthdist.com sales@worthdist.com1-800-282-8864 (Phone) 1-866-542-0470 (Fax)

35Window TreatmentsMotorized Shades

Motorized Roller ShadesWorthington Distribution makes ordering

complete motorized shades easy

• Measure the opening (see below)• Look on the chart to determine the base price for the fabric, tube and

installation brackets• Choose any fascia or rail/sill options• Choose a motor based on how the shade will be installed and controlled• Choose a power option based on the motor selected• All window treatments are custom-made and pre-paid• Most orders ship within 2 weeks

On Molding

There are 3 type of measurements for shades:

• Inside the frame: This approach is used when the exterior walls feature 2x6 construction. Windows are mounted on the exterior, leaving a pocket that is 4+ inches deep, perfect for a shade. Measure the width at the top, middle and bottom. Use the narrowest width. When ordering,

request a deduction so the shade brackets do not bind when installed. Any gap is easily cured with shims.

• Surface Mount: This approach is for when the shade is going to be mounted on the molding. Measure from molding edge to molding edge. A deduction is not requested when using a surface mount approach.

• Cloth Measurement: This approach is not used often. Use cloth measurement when the fabric must be a specific width and the total bracket width is flexible. The fabricator cuts the cloth to the exact dimensions and then adds the motor and brackets. Total width varies based on the motor type and tube diameter.

• Measure the space to the closest 1/8”. Always round down. Provide the height and the narrowest width measurement. Always use a metal measuring device for accuracy.

Inside frame

Measuring for Motorized Roller Shades Motorized Roller Shade Motor Options• Power 110VAC: Motors feature the highest lifting

capacity of the 3 power options offered in the Worthington Distribution shade program. While the motors are more expensive, there are no power supplies to add. We offer the Somfy Sonesse (quiet series) motors which are available with contact closure, ILT (can be converted to RS-485, Z-Wave or ZigBee), or 1 way RTS wireless. The 110VAC motor uses wider tubes than low voltage; however, they feature very consistent speeds regardless of wire length.

• Power 24VDC: The most popular motor offering for the low voltage contractor. Shades start at only 24” and typically run up to 96” wide. The 24VDC motors are typically pre-wired with 18 (100’) ,16 (150’), or 14 (200’) gauge wire. When multiple shades are pre-wired for the same room it is recommended to keep the wire lengths equal so the motors will run at a similar speed. We offer the Somfy Sonesse (quiet series) motors which are available with contact closure, RS-485 (compatible with Z-Wave or ZigBee) , or 1-way RTS wireless.

• Power 12VDC: The most economical and flexible motor. This motor can be run on a plug-in power supply or it can be 100% wireless. Battery options include Lithium AA’s, or a solar recharging system with a 5 year guarantee. Control is with 1-way RTS wireless. Shade sizes vary based on length but are up to 96” on a 72” long treatment.

Ordering Complete Treatmentswww.worthingtondistribution.com/shades

• Links to fabrics• Integration diagrams

• Ordering sheets• Presentations• Larger Pricing Charts

Key questions when getting started• Do you need a shade (pages 36-37), drape (page 38) or blind (page 38)?• What type of power are you going to use (110 VAC, 24VDC, battery, solar)?• Is this new construction or retrofit? Wireless communication or hardwired?• What are the sizes of the treatments? How many treatments?• How are you looking to control the window treatments?• If this is being controlled by an automation system, do you need 2-way

communication? Do you need percentage control or is open/close sufficient?

Questions? E-mail shades@worthdist.com

Custom Roller Shades

• Worthington Distribution has teamed up with one of the country’s largest fabricators to offer our dealers exceptional custom shades

• Each treatment is cut on a completely automated vacuum table that pulls the fabric to the table for an accurate square cut every time

• To add and hem the weight bar, and RF welder uses a shuttle system that enables the fabric to be welded without handling the fabric thus ensuring a perfect weld every time

• The final stop for each shade is the assembly table and testing racks. Each shade must be tested before it is packed for shipment.

• While testing, the aesthetic aspects of the shade are reviewed for scratches, dirt and proper rolling. Once a shade has been deemed perfect it will be wrapped and then packaged for safe transfer.

Surface mount

www.worthdist.com sales@worthdist.com1-800-282-8864 (Phone) 1-866-542-0470 (Fax)

36 Window TreatmentsMotorized Shades

24VDC Motor Power Solutions (Sonesse ST-30)

Add a Motor to the Base Price (Not Sold Seperately)Motor Power Control Base Pricing Chart PriceLT-30 12VDC RTS Wireless White $193

ST-30DCT 24VDC Contact Closure White and Grey $267ST-30RTS 24VDC RTS Wireless White and Grey $297

ST-30RS485 24VDC RS-485 White and Grey $327Sonesse 50 RTS 110VAC RTS Wireless White, Grey and Black $459Sonesse 50 ILT 110VAC ILT, Contact Closure White, Grey and Black $513

Limit Setting AccessoriesSonesse 30 (ST-30) DCT and RS-485 Limit Setting

SOM9014599 Limit tool for ST-30DCT and RS485 motors 28.84SOM9014793 Cable for use with SOM9014599 15.16

Sonesse 50 ILT Limit SettingSOM9050280 ILT motor limit tool (no cable needed) 72.10Note: RTS Motor limits are set with an RTS remote (next page)

Complete 24VDC Power and Communication SolutionsSOM1870196 Complete 5 motor enclosure: power and data 734.71SOM1870192 Complete 10 motor enclosure: power and data 1105.51SOM1870197 Complete 15 motor enclosure: power and data 1431.67SOM1870198 Complete 20 motor enclosure: power and data 1706.32

Great choice for large jobs. Installation is quick and professional

Ala Cart 24VDC Power and DistributionSOM1822209 24VDC 1.25A Wall Mount Plug-in PS (1 motor) 44.15SOM9011994 24VDC 5A Din Rail Power Supply 215.83SOM9011995 24VDC 10A Din Rail Power Supply 350.34SOM1870193 Low voltage Power and Data Board - 5 motors 78.96SOM1870194 Low voltage Power and Data Board - 10 motors 109.86

Ordering Complete Motorized Shade• Base Price:

Using the chart to the left, find the height and width of the treatment you will be ordering. Round up to the next height / width. Note the available fabrics listed at the bottom of the chart.

• Choose a motor (below): Motor type is chosen based on the

power available and control options LT-30: A 12VDC motor controlled by

Somfy 1-Way RTS Wireless ST-30: A quiet 24VDC motor

controlled by Somfy 1-Way RTS Wireless, RS-485, or contact closure

Sonesse 50: A quiet 110VAC motor controlled by Somfy 1-Way RTS Wireless, RS-485 (converted ILT), or contact closure

• Choose a power solution: See the next page for pre-wire

suggestions.

12VDC: Plug-in power supply, battery, or solar charged batteries

24VDC: Plug-in power supply, power and data distribution cabinets

110VAC: Outlet at the motor, Cat 5 to a Power/Control Distribution Board

• Pricing example: • Opening measurement 47”W x 73”L • 24VDC power RTS (1 shade) • Rails and Sills, no fascia • Base Price $122 • Rails ($76) + Sill ($22) $98 • Motor (ST-30RTS) $297 • Plug-in power supply $43 Total: $560 • Shipping: Not included

• Add controls (next page): • RTS remote $53

Maximum Width Of Shade (Inches) Rails:pair24" 30" 36" 42" 48" 54" 60" 72" 84" 96" 108" 120" 132" 144"

36" 54 62 70 77 84 89 95 111 132 149 165 186 246 265 38

42" 58 66 75 82 89 97 104 122 144 162 181 201 264 281 43

48" 62 70 78 86 95 104 113 133 157 176 197 216 281 297 49

54" 65 74 83 92 101 110 119 145 170 188 209 230 295 315 54

60" 68 77 86 97 108 116 124 157 184 205 227 243 311 332 59

66" 71 81 91 102 113 122 130 165 193 216 240 257 325 348 65

72" 73 84 95 107 119 127 135 173 203 227 254 270 340 365 70

78" 76 87 99 110 122 132 142 180 211 239 265 285 352 381 76

84" 78 90 103 114 125 137 149 186 219 251 275 300 370 397 81

90" 83 97 112 125 138 150 162 193 228 260 287 313 386 444 86

96" 92 107 122 136 151 163 176 200 238 270 300 327 402 432 92

108" 100 116 132 147 162 174 186 216 254 289 324 356 432 464 103

120" 108 124 140 158 176 188 200 230 270 302 351 383 462 497 113

132" 116 138 159 177 194 212 230 265 305 321 375 410 494 529 124

144" 124 147 170 188 205 223 240 278 327 340 400 440 524 562 135

156" 154 177 200 220 240 262 284 321 367 408 448 489 575 618 146

168" 162 186 211 232 254 275 297 335 389 429 473 516 605 651 157

Motors White: All Motors Grey: ST-30 (24VDC) & Sonesse 50 (110VAC) Black: Sonesse 50 (110VAC):

Sill: each 14 16 19 22 24 27 30 35 41 46 51 57 62 68

4” Fascia 24 27 30 32 35 38 41 46 51 57 62 68 73 78

4” Head 82 91 100 109 118 128 137 155 173 191 210 228 246 264

5½” Head 108 118 128 138 148 157 167 177 197 226 246 266 285 305

Cassette 38 42 46 50 54 59 63 71 80 88 96 105 113 121

• Pricing is for Alkenz 3000 NET: 1%, 3%, 5%, 10% with a Lifetime fabric warranty• Alkenz colors can be viewed at http://www.rollease.com/alkenz/sunshadow3300.html.• Pricing is for Mermet E screen: 3%, 5%, 10%; M screen: 3%, 5%; Vienne 10%; Geneva Twilight: Blackout• Mermet colors can be viewed at http://www.mermetusa.com.• Pricing is for Phifer SheerWeave 2000,2100,2360,2390,2410,2703,2705,4000,4500,4550,4700,7500 fabrics• Phifer SheerWeave colors can be viewed at http://www.phifer.com/. • Other premium Phifer SheerWeave fabrics are available: 7000 blackout fabric (base price above times 1.45), 5000 blackout fabric (base price above times 1.35), 4600 and 4650 fabrics (base price above times 1.15)• Fascia is powder coated and available in Aluminum, White, Tan, and Brown• The 4” and 5½” head pockets are 3-sided boxes for installation rough-ins. Use 4” for ST-30 and 5½” for Sonesse 50• Shipping is not included, power and control options sold separately• Sonesse 50 (110VAC) treatments must be at least 36” wide

Max

imum

Hei

ght O

f Sha

de (I

nche

s)

• Other motors and shade sizes are available, give us a call for a quote

All window treatment control solutions are custom-designed based on application.Call us at (800) 282-8864 or email shades@worthdist.com for pre-sales support.

We offer competitive pricing for any job, so contact us for a free quote.www.worthdist.com sales@worthdist.com1-800-282-8864 (Phone) 1-866-542-0470 (Fax)

37Window TreatmentsAccessories

Contact Closure Integration: When using an ILT or ST-30 DCT for contact closure control, only one motor can be connected to each relay. Use a SOM9012345 for contact closure control of an ILT motor.

HAI Integration - Somfy Digital Network (RS-485 and ILT)

Somfy ILT Motor Communication Interfaces SOM1870127 ILT Tap - 1 Required at the HAI panel 61.69SOM1822111 12VDC 1A Power supply for the ILT Tap 19.51SOM1870154 4 Port ILT Interface - Wire within 30’ of the motor 56.93

One of each part above is required when using ILT motors. Multiple ILT interfaces can be used and interconnected via Cat 5 wire.

SOM9012345 ILT contact closure splitter and break out box - Use to control an ILT motor via contact closure

16.27

Hardwired Shade Motorization Pre-WireSomfy ILT and RS-485 Programming

SOM485KIT USB/RS-485 PC adapter, cable, instructionsPlug into the ILT tap or a power distribution board

75.00

The Somfy Digital Network RS-485 programming software is free www.somfy.us, click ‘configuration software’, download ‘ILT2-ST30’

The software reads motor addresses, creates groups, and changes speedSOM1810828 SDN wall switch, use for testing, mount by HAI 86.05SOM9014573 RJ-45 Splitter to install the SDN wall switch 10.16

HAI offers support for Somfy RS-485 and ILT motors. The integration is 2-way and there is support for both direct motor control as well as group commands.

110VAC ILT Pre-Wire 24VDC ST-30 Pre-Wire

14/2 + GndCat 5 to an

ILT Interface (30’ limit)

16/2 (150’)14/2 (200’)

Cat 5

• Cable location: • 24VDC: Wire can come through the wall close

to the motor location. Be certain to leave room for the brackets. Only one power feed per run.

• 110VAC: 14/2 can go to a box near the motor. Traditionally a cornice is installed to cover the outlet (see picture).

• Still deciding?: Use 110VAC ILT wiring, it can work with RS-485 motors

• Communication • RS-485 (24VDC): Cat 5 is traditionally homerun • ILT (110VAC): Cat 5 to a 4 port ILT interface (30’) • Contact Closure: Cat 5 homerun, 1 per motor

Power Solutions for 12VDC Motors (LT-30 and SOM1000678 Tilt Motor for Blinds)

Lithium Battery Solutions - Typically 1 Year LifeSOM9014020 12VDC Reloadable Battery Tube (Batteries not included) 27.91SOM9014834 8 AA Lithium Battery Package (for battery tube #9014020) 37.03SOM9015580 12VDC Reloadable battery tube harness (used to connect 2 single tubes) 2.27SOM1822192 12VDC Plug-in Power Supply with 25 ft. cable (white) 106.48

Convert Battery to a Plug-In TransformerSOM1822192 12VDC Plug-in Power Supply with 25 ft. cable (white) 106.48

Rechargeable Battery Solutions - Guaranteed 5 Year LifeSOM9015575 Solar Pack: solar panel, rechargeable battery, Y cable and mount 56.65SOM9015624 Replacement rechargeable battery for the solar pack 39.79SOM9015781 Pre-installation AC charger - required for solar applications - 24hr charge 65.73

Solar Powered Shades and Blinds

• Order the SOMHAICBL cable and SOM1810872 (URTSII)• Turn the URTSII jumper to 1 and clone an RTS handheld remote channel

repeat for additional RTS channels. Test with the up/down/stop buttons.• Set the dial to position 1 (address 1 on the RS485 network)• Set the HAI serial port jumper to RS-485 (not RS-232)• Set the serial mode to ProLink (not Somfy)• Send messages from the HAI to the URTSII• Messages UR CH DIR • UR = Address: 01 to 16 (2 digits) • CH = Channel: 01 to 16 (2 digits) • DIR = Direction: U = Up D = Down S = Stop (Must be capital letters)• Examples: URTSII 1, Channel 1 UP; send 0101U URTSII 3, Channel 12 DOWN: send 0312D

RTS Integration and ControlSOM1810872 16-channel universal RTS (URTSII) interface.

Integrates IR or RS-485 to RTS. Use with HAI405.82

SOMHAICBL 6’ cable, connects an HAI with the URTSII 9.99SOM1810493 RTS Transmitter with Dry Contact inputs 69.34HAI10A07 4 relay board: Use 3 relays per SOM1810493 37.97SOM1810791 RTS Repeater (only 1 per installation) 184.13

HAI Integration - RTS Wireless

Somfy RTS Remote ControlsSOM1810632 1-channel Telis Pure 54.73SOM1810633 5-channel Telis Pure 71.04SOM1811081 16-channel Telis Pure 135.96Worthington offers the entire Somfy line of RTS transmitters. Please call for additional options SOM1810633 SOM1810632

SOM1870171 Add Z-Wave to an RS-485 or ILT motor 164.80SOM1870202 Plug-in Z-Wave to RTS Wireless interface 334.79SOM1870226 Add ZigBee HA Profile to an RS-485 or ILT motor 160.00

Z-Wave and ZigBee AdaptersConvert any Somfy RS-485 or ILT motor to Z-Wave or ZigBee HA. For RTS mo-tors, use the Z-Wave to RTS plug-in interface.

SOM1870171SOM1870226

Control Options

• The best Somfy integration with HAI is the Somfy Digital Network (RS-485 and ILT); however, the most popular integration is RTS (Radio Technology Somfy)

• RTS is available in all Somfy motor classes including roller shades, drapery, and blinds

• Handheld and wall mount RF remotes offer a large number of installation and control options

• A repeater can be added in larger applications• Integration with HAI is easy via contact closure or RS-485

If the blind uses a 1/4” x 1/4” square shaft, no adapter is required

2” Blind RTS Enabled Tilt Motor Retrofit

Motor and Headrail Adapter and RemotesSOM1000678 Tilt Motor, 12VDC, lift up to 30 lbs., Black 115.00SOM9014529 Headrail Adapter for 2” x 2 1/4” Headrail 6.03SOM9014528 Low Profile Adapter for 1.5” x 2 1/4” Headrail 6.03SOM1810765 Telis 5 Channel RTS Remote for Tilt Motors - Pure 137.00SOM1810974 Telis 1 Channel RTS Remote for Tilt Motors - Pure 99.90

Optional Shaft AdaptersSOM9014535 5.6mm Hexagonal Adapter 1.46SOM9014536 D Rod Adapter 1.46SOM9014540 4mm Square Adapter 1.46

9014540 90145369014535

Retrofitting 2” blinds with a tilt motor is an easy process

• Order a SOM1000678 motor• The motor will tilt up to 30lbs.• Look at the main shaft in the

headrail of the blind. Choose a matching adapter (below). If the shaft is 1/4” square, no adapter is needed

• Choose a battery, plug-in or solar power solution (above)

• The headrail must be between 1.5” and 2 1/4” high• Order the correct headrail adapter• Choose RTS controls

Tilt Motor and 9014528 Headrail Adapter

• Extremely quiet drapery system (<44dBA)• Integrated power supply, just plug into 110VAC• Touch Motion: Pull the fabric, the motor begins to move• The Glydea 60 motor can pull up to 132 lbs./19.6 ft of fabric• Reversible mount allows the motor side to be changed in the field

Drapery Bracket Options - Not Included in Pricing AboveSOM1780907 One Touch Ceiling Bracket 2.60SOM1780906 Swivel Ceiling Bracket: less rod/ceiling light gap 1.23SOM1782054 4.5” - 6” Adjustable Wall or Ceiling Bracket Kit 7.95SOM1782053 8.75” - 10.25” Double Wall Mount Bracket Kit 11.79

Glydea Drapery Motor AccessoriesSOM9154205 IR receiver for the Glydea motor 39.15SOM1870133 IR remote - use with the 9154205 IR receiver 26.79SOM9014599 DCT limit setting tool. Use with RS-485 and

contact closure applications28.84

SOM9013346 Cable for the DCT limit setting tool 8.23

SOM1780907 SOM1780906 SOM1782054 SOM1782053

Maximum Width 5’ 6’ 7’ 8’ 9’ 10’ 11’ 12’ 13’ 14’ 15’ 16’ 17’ 18’ 19’Brackets Needed 3 4 5 6 7

Pinch Pleat: Center - 3 carriers/ft 645 661 675 692 709 743 758 780 795 815 831 864 883 900 935

Pinch Pleat: Side - 3 carriers/ft 639 654 668 686 703 737 752 774 788 809 825 858 877 894 929

RippleFold 80%: Center - 5 carriers/ft 675 697 717 740 763 803 824 852 873 899 921 960 985 1,008 1,049

RippleFold 80%: Side - 5 carriers/ft 669 690 710 734 757 797 818 846 866 893 914 954 979 1,002 1,043

RippleFold 100%: Center - 6 carriers/ft 684 707 729 753 779 820 843 873 895 923 946 987 1,014 1,039 1,082

RippleFold 100%: Side - 6 carriers/ft 678 701 722 747 772 814 837 867 889 917 940 981 1,008 1,033 1,076

RippleFold 120%: Center - 7 carriers/ft 692 717 741 767 794 837 862 893 917 947 972 1,015 1,043 1,070 1,114

RippleFold 120%: Side - 7 carriers/ft 686 711 735 761 788 831 856 887 911 941 966 1,009 1,037 1,064 1,108

Pricing above is for a Somfy Glydea 60 motorized drape motor with carriers and track. Control is via contact closure. Shipping and brackets are not included. All lengths 108” and longer will be broken down for shipping and will need to be reassembled on site (instructions included).

The Glydea drapery system is available to 36’ long. In addition, curved tracks are available. Call for pricing on tracks not listed above.

Motor Upgrade options RTS Wireless - $74.16 RS-485 - $84.24 ZWave Wireless - Call ZigBee HA Pro - $156

Opening Stack Rod38” 26” 54”44” 28” 72”50” 30” 80”58” 32” 88”62” 34” 98”68’ 36” 104”75” 37” 112”81” 38” 120”87” 41” 128”94” 42” 136”

100” 44” 144”106” 46” 152”

Original Opening

Stack Rod Length• The chart is for standard pinch pleat drapes• Start by measuring the opening• The stack column estimates the amount of

area the fabric will need when it bunches up• To allow the entire opening to be visible when

the drapery is open the rod length should equal the opening width plus the stack width

• When the rod length is too short, the drapery may block part of the opening when open

Determining Motorized Drapery Rod Length

• Pricing example: • Rod Length 98” • Center draw, pinch pleat • Single wall brackets • RTS Controls

• Rod $709• RTS Receiver $74.16• Brackets (4) $31.80 Total: $814.96• Controls and shipping sold separately

Opening Stack Rod112” 48” 160”119” 49” 168”126” 51” 176”131” 53” 184”137” 55” 192”144” 57” 200”150” 58” 208”156” 60” 218”162” 62” 224”169” 63” 232”175” 65” 240”181” 67” 248”

Motorized Drapery - Glydea

www.worthdist.com sales@worthdist.com1-800-282-8864 (Phone) 1-866-542-0470 (Fax)

38 Window TreatmentsMotorized Blinds and Drapery