Wind turbine tower
-
Upload
shirley-yan -
Category
Documents
-
view
268 -
download
17
description
Transcript of Wind turbine tower
Qingdao Wuxiao Group Co., Ltd Wind Turbine Tower Introduction
青岛武晓集团有限公司 Qingdao Wuxiao Group Co., Ltd
风力发电塔架介绍
Introduction for Wind Turbine Tower
Qingdao Wuxiao Group Co., Ltd Wind Turbine Tower Introduction
目 录
一、企业概况…………………………………………………………………………………………1
1. 公司简介……………………………………………………………………………………………1
2. 公司组织机构图 ……………………………………………………………………………………6
3. 营业执照 ……………………………………………………………………………………………8
4. 组织机构代码证……………………………………………………………………………………10
5. 税务登记证明………………………………………………………………………………………12
二、质量管理体系……………………………………………………………………………………13
1. 质量手册……………………………………………………………………………………………13
2. 质量体系认证证明…………………………………………………………………………………15
3. 生产与安全许可证…………………………………………………………………………………18
4. 荣誉证书……………………………………………………………………………………………23
5. 材料转换…………………………………………………………………………………………24
6. 相关标准----………………………………………………………………………………………25
三、项目组织机构图、人员情况……………………………………………………………………26
四、主要生产设备清单………………………………………………………………………………30
五、主要检验设备清单………………………………………………………………………………34
六、风塔工艺 …………………………………………………………………………………………37
1. 工艺流程……………………………………………………………………………………………37
2. 质量计划…………………………………………………………………………………………42
3. 生产、运输计划…………………………………………………………………………………46
4. 焊接工艺指导书…………………………………………………………………………………48
5. 焊接工艺评定报告………………………………………………………………………………52
6. 无损检验规范……………………………………………………………………………………60
7. 技术规范转换……………………………………………………………………………………61
8. 焊工名单…………………………………………………………………………………………62
9. 无损检测人员名单………………………………………………………………………………66
10. 主要材料供方清单………………………………………………………………………………67
七、业绩表…………………………………………………………………………………………68
八、风场照片………………………………………………………………………………………73
九、发货-------------------------------------------------------------------------76
十、联系我们---------------------------------------------------------------------79
Qingdao Wuxiao Group Co., Ltd Wind Turbine Tower Introduction
Table of Contents
Ⅰ Enterprise’s Overview…………………………………………………………………………………1
1. Company Status……………………………………………………………………………………1
2. Organization chart…………………………………………………………………………………6
3. Business license……………………………………………………………………………………8
4. Code Certificate of Organizational Structure………………………………………………………10
5. Taxation License……………………………………………………………………………………12
Ⅱ Quality Management System ………………………………………………………………13
1. Quality Manual……………………………………………………………………………………13
2. Authentication……………………………………………………………………………………15
3. Production and Safety license……………………………………………………………………18
4. Honor Certificates ………………………………………………………………………………23
5. Material …………………………………………………………………………………24
6. Related Standards………………………………………………………………………25
Ⅲ Project Organization and Personnel……………………………………………………………26
Ⅳ Major Production Facilities…………………………………………………………………………30
Ⅴ Major Testing Equipments…………………………………………………………………………34
Ⅵ Tower Procedure…………………………………………………………………………………37
1. Process……………………………………………………………………………………………37
2. Quality Plan………………………………………………………………………………………42
3. Production and Delivery Schedule…………………………………………………………………46
4. Welding Procedure Specification…………………………………………………………………48
5. Welding Procedure Qualification Report…………………………………………………………52
6. NDT Procedure……………………………………………………………………………………60
7. Specification&Standard……………………………………………………………………………61
8. Welder List…………………………………………………………………………………………62
9. NDT List……………………………………………………………………………………………66
10. Main material supplier list…………………………………………………………………………67
Ⅶ Outstanding Achievement……………………………………………………………………68 Ⅷ Wind Farm…………………………………………………………………………………73
Ⅸ Delivery ---------------------------------------------------------------------76
Ⅹ Contact us ---------------------------------------------------------------------------------------79
Qingdao Wuxiao Group Co., Ltd Wind Turbine Tower Introduction
一、企业概况
1. 公司简介
青岛武晓集团有限公司创建于 1993 年 3 月,历经十多年,现已发展成为全国大
型民营铁塔生产企业。现有员工 2838 余名,占地 60 万平方米,总资产 5.8 亿元,
产品涉及风力发电塔架、压力管线、微波通讯、广播、电视、测绘、了望等各类用
途的角钢铁塔以及大直径圆管铁塔程和风塔。年产塔类构件 30 万余吨,可根据顾客
需要提供设计、生产、安装总承包或单项承包服务。
集团公司拥有先进、完善的设计、生产和检测设备。设计上已普及应用了微机
辅助设计,拥有目前国内先进的硬件系统及辅助设计、计算放样软件。生产上有大
型数控折弯机、先进的数控角钢及联板自动加工生产线,将计算机三维放样软件与
生产线联网,可以使放样与生产同步进行,减少中间环节,提高产品的尺寸精度。还
有数控板机生产线、数控自动切割机、大型热镀锌槽及先进的镀锌辅助设计、埋弧自动
焊机、气体保护自动焊机以及其它各种手工焊机和其它冷作设备如曲柄压力机(冲床)、
剪板机、自动气割机、液压整形机、钻床、卷板机、车床、刨床等,共200余台套。检
测上有 600KN万能试验机、五大金属化学元素自动分析仪、光谱分析仪、验钢镜、X
光及超声波探伤仪、经纬仪等先进的检测化验设备。
没有创新便没有进步,公司在严格保证质量稳定的前提下,积极开发新产品,
先后与广播电影电视部设计院、邮电部郑州设计院及电力部电建研究所建立了长期技术
合作关系,已成功开发了多种角钢塔、组合式钢管塔及单柱棱锥式钢管塔等,为广播电
视铁塔、通讯、电力铁塔项目服务并创造出了良好的社会效益和经济效益。集团公司的
前身是胶州制塔厂创建于九三年。多年来,公司一直从事于钢塔桅结构的设计、制造、
安装,为国内外数百家广播、电视、邮电、电力、军队等部门制作过各类用途的铁塔
及类似钢结构,产品质量和服务得到了用户的肯定。
公司早于 1995 年便取得广播电视部首批广播电视塔生产许可证;96 年、97 年
取得电力部颁发的 110KV 和 220KV 输电线路铁塔生产许可证;99 年 4 月,我公司又取
得了电力工业部颁发的 500KV 输电线路铁塔生产许可证,6月取得 220KV 输电线路钢
管杆生产许可证。2003 年 1 月我公司生产的 500KV 多棱形输电线路钢管杆产品获得
Qingdao Wuxiao Group Co., Ltd Wind Turbine Tower Introduction
了福州国电电力设备质量检测有限公司颁发的《质量合格证书》,2 月又获得国家电
力工业部颁发的 500KV 四柱圆形输电线路钢管杆的制造《资质证书》。
我公司于 1994 年取得了国家计量合格证;获青岛市技术监督局产品质量信得
过荣誉称号;97 年我公司被电力部机械局纳为归口管理企业,并由电力部铁塔质检
中心对我厂生产过程进行监造,同年取得了农业部颁发的中型二档乡镇企业证书。
2001 年 12 月获得了山东机械工业理化检测协会颁发的二级《理化检测等级证书》。
2002 年 6 月取得了《中华人民共和国进出口企业资格证书》,可直接与外国进行合作。
随着业务的不断拓展,公司现为多省、市电力物资供销网络的成员,加强了与
各省市的业务联系。我公司一向推行科学化、规范化管理,积极向国际化标准靠近,
于 98 年 12 月 9 日,公司正式通过了由中质协和商检局两家认证机构 ISO9002 质量
保证体系的认证审核,管理上系统地实行了文件化、制度化管理,2001 年 12 月,在
原有的基础上我公司再接再厉顺利通过了 ISO9001:2000 质量管理体系的认证,使
我公司的各项管理又上了一个大的台阶。
青岛武晓制管有限公司是青岛武晓集团旗下的大口径、厚壁、直缝焊接钢管以
及大功率风力发电塔塔架的专业制造公司,总投资额为一亿七千万人民币,总建筑
面积五万平方米。现有员工 460 名,科研人员 40 名,其中风力发电塔架专业制造人
员 360 名;公司有中国最早从事风力发电塔塔架制造与工艺研究的著名专家。自行
研制了五条高效率的塔架焊接生产线,月生产能力为 60 台套,年生产能力 700 台套,
是目前中国生产能力最大的塔架生产厂。
公司于 1996 年开始涉及制造风力发电塔架,2003 年开始大规模生产,积累了丰
富的塔架生产经验,赢得了国内外广大风电厂商的广泛信赖。先后制作了 Vestas
850KW、GE 1.5MW、Gamesa 850KW、Nordex 1.3MW、金凤科技 600 KW 及 750KW
塔架等;为中国华能公司、龙源公司、大唐公司、国华公司、北京国投公司及各省
级风电投资公司提供了大量的优质产品;参与建设的风电场有内蒙古达里风场、赤
峰风场、辉腾锡勒风场、翁牛特旗风场、呼论贝尔风场、新疆托里风场、达板城风
场、广东石碑山风场、黑龙江穆棱风场、大青山风场、吉林白城风场、辽宁恒仁风
场、康平风场、河北张家口风场、山东栖霞风场等等。
公司于 2005 年 12 月顺利通过 ISO9001:2000 质量管理体系认证。
我公司恪守“让顾客更满意”的质量方针,竭诚欢迎各界领导、专家莅临考察
指导,我们将以一流的质量和服务,赢得您的信任。
Qingdao Wuxiao Group Co., Ltd Wind Turbine Tower Introduction
1. Company Status
The company was initially established in March,1993, located in Qingdao, Shandong
province, China. Through the constant development of more than ten years, she has grown
into a national large-scale private firm with 2200 employees 600,000 ㎡ plant coverage and
230 million fixed assets.Engaging in tower manufacturing for more than a decade, she has
longtime experience in the design, manufacture and installment of steel tower mast structure.
Main products include all kinds of iron towers and similar steel structures widely used in the
fields like power transmission, substations, tele-communication, microwave-communication,
radio/TV broadcasting, mapping, watchtower etc. The general annual production capacity is up
to 10 million tons. In compliance with the customers’ requirements, we can provide project
general contract for tower design fabrication and installation or single package contract.
The company successively obtained <Production License of Iron Tower of 500KV>in 1997,
<Certificate of Competency of Quality Inspection>, <National Certificate of Measurement>,
<Certificate of Guaranteed Measurement>, <Provincial High Credit & Reputation Enterprise >,
etc., a series of qualification and honors, we also possess <Franchise of Import & Export of the
People’s Republic of China>.
The company possesses advanced and sufficient R&D system, first-class hardware as
well as design and molding software. AutoCAD is adopted in the design and laying off work.
Through the usage of LAN (local area network) system, design and production are smoothly
connected which results in the efficiency and precision. The company is equipped with various
digital machineries like large-scale bending machine, automatic production line of angle steel
and connecting plate, automatic cutting machine, and plasma pipe cutting machine. Other
major hot-treatment machineries include large-scale zinc G.I tank (accessories), continuous
cutting machine, gas protection welding machine, submerged arc welding machine, and
manual welding machines. The main cold-treatment machineries are crank extrusion press,
plate shearing machine, hydraulic truing machine, drilling machine, lathe, planer etc .all
together more than 150 sets. There are full sets of physical & chemical property testing
instruments as well: 600KN universal material tester, infrared-ray carbon & sulfur analysis
instrument, manganese, phosphorus & silicon automatic analysis instrument, spectrum
analysis instrument, steel inspection mirror, theodolite, ultrasonic in-destructive flaw testing
instrument, x-ray flaw testing instrument and so on. These machineries and instruments
safeguard the production of qualified goods. For product transport, there are nearly 30 sets of
various vehicles meeting the needs.
In 1995, the company obtained the TV & Radio Tower Production Certificate (National TV
& Radio Ministry); obtained 110KV/220KV/500KV Transmission Tower Production Certificate
Qingdao Wuxiao Group Co., Ltd Wind Turbine Tower Introduction
from National Power Ministry in 1996, 1997, 1999 respectively. In June 1999, it gained 220KV
Power Transmission Steel Pole Production Certificate. In recent years, it obtained the
production certificate for 500KV prism steel pole and four-column steel pipe tower as well as
500KV substation structure. In 1994, the company got the National Measurement Qualification;
Title of High Quality Product from Qingdao Technology Supervision Bureau; December 2001,
Physical and Chemical Property Testing Certificate (Grade Two) from the Physical and
Chemical Property Testing Society of Shandong Industrial Machinery. In 2004, the company
passed the National Enterprise Quality Inspection Unit Conformation, and for many years the
company has been titled Contract Biding and Promise Keeping Enterprise, Also, in 2002, the
company was offered the Qualification Certificate for Import and Export of PRC.
The company highlights scientific and standardized management and has been vigorously
narrowing the gap with international standards, establishes and implements various
management regulations. Dec.9, 1998, we passed, officially, the examination of ISO9002
Quality System by China Quality Commission and Trade Inspection Bureau, thus entering a
new stage in management and service. In December 2001, we successfully passed the
examination of ISO9001: 2000 Quality Control System, making a stride in every field of
management.
Through decade of endeavour and development, the Group Company came into being,
but we are not self-satisfied. We have higher aim to achieve, i.e; hundred years of enterprise.
We are creating a study atmosphere in the company. Through study make the company more
lively and competitive.
Qingdoa Wuxiao Tube Making Company is a division of Qingdao Wuxiao Group, which started
producing tower building in 1996 and started mass production since 2003. The total investment is RMB
170 million. The staff is 460,including the engineers and technicians 40,wind –power equipment
making workers 360. We have 5 production lines and the output is 60 sets/month,700 sets/year, and we
can say we have the largest production ability in this field in China.
Ever since its foundation, the company has provided tower units to the following major customers
as Vestas 850KW、GE 1.5MW、Gamesa 850KW、Nordex 1.3MW、Goldwind Tech 600 KW and 750KW.
We have received favorable reputation from our customers in these 10 years.
We have got ISO9001:2000 certification in December of 2005.
Our Guideline is Give our customer more satisfaction. And your kind visit and trust will
be highly appreciated.
Qingdao Wuxiao Group Co., Ltd Prequalification Document
5
2. 风塔公司组织机构图
Qingdao Wuxiao Group Co., Ltd Prequalification Document
6
2. Organization chart(wind turbine tower company)
Qingdao Wuxiao Group Co., Ltd Prequalification Document
7
3. 营业执照(Business license)
Qingdao Wuxiao Group Co., Ltd Prequalification Document
8
Qingdao Wuxiao Group Co., Ltd Prequalification Document
9
4. 组织机构代码证(Code Certificate of Organizational Structure)
Qingdao Wuxiao Group Co., Ltd Prequalification Document
10
Qingdao Wuxiao Group Co., Ltd Prequalification Document
11
5.税务登记证(Taxation License)
Qingdao Wuxiao Group Co., Ltd Prequalification Document
12
二、质量管理体系(Quality Management System )
1.质量手册 Quality Manual
Qingdao Wuxiao Group Co., Ltd Prequalification Document
13
comtrolled condition: Document No :Q/WX-2005A
Serial No:02
Quality Assurance Manuel Edition:A
0
Modifying Status:0
Composed by: Zhangfuxu DATE:June 1, 2005
Checked by: Wangwenyu DATE:June 1, 2005
Approved by: Hanyongbo DATE:June 1, 2005
EFFECTIVE JUNE 1ST, 2005 QINGDAO WUXIAO Pipe Making CO ., LTD QINGDAO WUXIAO POWER PLANT EQUIPMENT CO ., LTD
Qingdao Wuxiao Group Co., Ltd Prequalification Document
14
2. 质量体系认证证明(Authentication)
Qingdao Wuxiao Group Co., Ltd Prequalification Document
15
Qingdao Wuxiao Group Co., Ltd Prequalification Document
16
Qingdao Wuxiao Group Co., Ltd Prequalification Document
17
Qingdao Wuxiao Group Co., Ltd Prequalification Document
18
3. 生产与安全许可证
Production and Safety license for Boiler
Qingdao Wuxiao Group Co., Ltd Prequalification Document
19
Qingdao Wuxiao Group Co., Ltd Prequalification Document
20
Qingdao Wuxiao Group Co., Ltd Prequalification Document
21
Qingdao Wuxiao Group Co., Ltd Prequalification Document
22
Qingdao Wuxiao Group Co., Ltd Prequalification Document
23
Qingdao Wuxiao Group Co., Ltd Prequalification Document
24
Qingdao Wuxiao Group Co., Ltd Prequalification Document
25
4. 荣誉证书(Honor Certificates)
Qingdao Wuxiao Group Co., Ltd Prequalification Document
26
5. 材料(仅作参考. 风塔制作要根据客户的实际需要制作)
序号 材料名称 材质 备注
1 筒体 Q345D 屈服强 355Mpa 2 门框 Q345D
3 基础环筒体 Q345D
4 基础环下法兰 Q345E 做-50℃冲击试验
5 砂箱 Q235B
6 锻造法兰 S355NL
7 平台 Q235B 花纹板
8 塔内爬梯 Q235B 方管
9 塔体焊接附件 Q235B
5. Material Substitution(only references for our customer.
The tower must be done as per the customer’s requirements)
No Description Material Remark
1 Tower steel Q345D Yield strength 355Mpa 2 Door Frame Q345D 3 Foundation Ring Q345D 4 Flange under Foundation Ring Q345E -50℃ Compact test 5 Casting box Q235B 6 Forged Flange S355NL 7 Platform Q235B Anti-skid plate 8 Internal Ladder Q235B Square tube 9 Welded Accessories Q235B
Qingdao Wuxiao Group Co., Ltd Prequalification Document
27
6. 相关标准转换
无损检测规范:按 JB4730-2005 执行。
焊接标准:执行 JB4708-2000。
原材料标准:执行 GB/T1591-94(低合金高强度结构钢)、GB700-88(碳
素结构钢)
锻造法兰执行标准:按图纸要求(或从韩国进口)。
以上要求是针对我们国内某个工程的要求。;每个项目的要求都不一样,
我们必须根据客户实际情况做出调整。
6. Substitution of Relevant Codes and Standards
Non-destructive Test Code: JB4730-2005
Standard for Welding: JB4708-2000
Standards for Raw Material: GB/T1591-94(Low alloy high strength
structural steel), GB700-88(Carbon structural steel)
Standard for Forged Flange: In conformity with the requirement of
relevant drawings (or imported form South Korea)
The above requirements are only for our Chinese market project. In
fact, every project has the difffernt requirements. We will adjust our
fabrication requirements based on the customer’s actual conditions.
Qingdao Wuxiao Group Co., Ltd Prequalification Document
28
三、项目组织机构图及人员情况
★ 项目组织机构图
项目经理
设备科质检科 技术科生产部
塔
筒
车
间
质
检
员
技
术
员
维
修工
理
化
实
验
室
无
损
检
验
员
Qingdao Wuxiao Group Co., Ltd Prequalification Document
29
Project Organizatio
Mai
ntan
ce S
taff
Tech
nici
an
Lab
QC
Sta
ff
ND
T In
spec
ter
Windmill Pipe Shop
Equipment Section Technical SectionQC SectionProduction Dept.
Project Manager
Qingdao Wuxiao Group Co., Ltd Prequalification Document
30
★ 项目人员情况
我公司塔架制造任务小组成员名单如下:
项目经理:王呈海 技术负责人:刘学信(科长)
质检负责人:那敏(科长) 生产负责人:王希海(科长)
技 术 员:8人 下 料 工:16 人
卷 板 工:16 人 铆 工:40 人
焊 接及气刨工:80 人 打 砂 工:20 人
油 漆 工:16 人 喷 锌 工:4人
下料及组对尺寸检验员:10 人
超声波检验员:8人 磁粉探伤人员:2人
射线探伤人员:3人
Qingdao Wuxiao Group Co., Ltd Prequalification Document
31
Personnel
To ensure the production quality and time schedule of the project, we
hereunder designate the following Project Team Members:
Project Manager:Wang Chenghai Chief Engineer:liu xuexin
QC Manager:Na Min Production Manager:Wang Xihai
Technician:8 Blanking:16
Bending:16 Riveting Welding:40
Welding and Finishing:80 Blasting:20
Painting:16 Zinc Coating:4
QC Staff for Blanking and Reveting:10
QC Staff for UT:8 QC Staff for MT:2
QC Staff for X-ray:3
Qingdao Wuxiao Group Co., Ltd Prequalification Document
32
四、主要生产设备清单 序号 名 称 型 号 规 格 数 量 单 位 备 注
1 行吊 16/3t 2 台
2 行吊 30/5t 3 台
3 行吊 20/5t 2 台
4 行吊 10t 10 台
5 卷板机 W11SNC30-3500 2 台
6 卷板机 W11STNC70-3600 1 台
7 卷板机 W11SNC30-3200 1 台
8 数控切割机 DHG6011 2 台
9 空压机 LGFD-8/7 1 台
10 空压机 W-1.0/7 11 台
11 空压机 AW105010 16 台
12 空压机 L75G-10 4 台
13 CO2 气保焊机 PC20-500 10 台
14 CO2 气保焊机 TA-500 19 台
15 CO2 气保焊机 NBC-500K 5 台
16 直流焊机 ZX7-400B 23 台
17 直流焊机 ZX5-500 6 台
18 摇臂钻床 Z3132 2 台
19 摇臂钻床 Z3040X16A 1 台
20 等离子切割机 LGK-100 1 台
21 燃油锅炉 CLHS03590/70C° 1 台
Qingdao Wuxiao Group Co., Ltd Prequalification Document
33
22 型材切割机 J3GB-400 2 台
23 无气喷涂机 QPT6528C 3 台
24 电弧喷涂机 QD8D400 1 台
25 自动埋弧焊机 MZQ-1000 4 台
26 自动埋弧焊机 MZC-1000F 1 台
27 自动埋弧焊机 MZ-1000 3 台
28 自动埋弧焊机 DC-1000 1 台
29 焊剂筛选机 HJX2-11 1 台
30 磁座钻 J3C-BG01-23A 1 台
31 焊条烘干保温箱 YZH2-200 1 台
32 焊剂烘干机 YXH2-550 2 台
33 焊接操作机 CZ12-5-5Z 10 台
34 自调式滚轮架 ZJGL-60 54 台
35 塔筒组对车 TTZZ4300 3 套
36 卧式带锯床 G4028 1 台
37 车床 CD6140A 1 台
38 立式铣床 XA5032 1 台
39 牛头刨床 BY60100A 1 台
40 折弯机 HPB200/40 1 台
41 剪板机 HGN25/13 1 台
Qingdao Wuxiao Group Co., Ltd Prequalification Document
34
Ⅵ Major Production Facilities
serial No Description Specification Qty Unit Remark
1 overhead crane 16/3t 2 Unit
2 overhead crane 30/5t 3 Unit
3 overhead crane 20/5t 2 Unit
4 overhead crane 10t 10 Unit
5 press bending machine W11SNC30-3500 2 Unit
6 press bending machine W11STNC70-3600 1 Unit
7 press bending machine W11SNC30-3200 1 Unit
8 CNC cutting machine DHG6011 2 Unit
9 compressor LGFD-8/7 1 Unit
10 compressor W-1.0/7 11 Unit
11 compressor AW105010 16 Unit
12 compressor L75G-10 4 Unit
13 CO2 welding machine PC20-500 10 Unit
14 CO2 welding machine TA-500 19 Unit
15 CO2welding machine NBC-500K 5 Unit
16 direct current welding machine ZX7-400B 23 Unit
17 direct current welding machine ZX5-500 6 Unit
18 Radial drill Z3132 2 Unit
19 Radial drill Z3040X16A 1 Unit
20 plasma cutting machine LGK-100 1 Unit
21 oil boiler CLHS03590/70C° 1 Unit
Qingdao Wuxiao Group Co., Ltd Prequalification Document
35
22 section cutting machine J3GB-400 2 Unit
23 airless sprayer QPT6528C 3 Unit
24 Arc- sprayer QD8D400 1 Unit
25 submerged arc auto welding
machine MZQ-1000 4 Unit
26 submerged arc auto welding
machine MZC-1000F 1 Unit
27 submerged arc auto welding
machine MZ-1000 3 Unit
28 Auto welding machine of
submerged arc DC-1000 1 Unit
29 welding flux screening machine HJX2-11 1 Unit
30 magnetic drill J3C-BG01-23A 1 Unit
31 Welding rod dryer YZH2-200 1 Unit
32 Flux dryer YXH2-550 2 Unit
33 Welding operating machine CZ12-5-5Z 10 Unit
34 self-regulation roller carrier ZJGL-60 54 Unit
35 Revolt welding machine TTZZ4300 3 Set
36 horizontal sawing machine G4028 1 Unit
37 lathe CD6140A 1 Unit
38 vertical milling machine XA5032 1 Unit
39 Milling machine BY60100A 1 Unit
40 Bending machine HPB200/40 1 Unit
41 plate-cutting machine HGN25/13 1 Unit
Qingdao Wuxiao Group Co., Ltd Prequalification Document
36
五、主要检验设备清单
名 称 型号、规格 数量 产地 时 间 先进性 用 途
微机高速自动碳硫分析仪
HB-4B 1台 无锡 96.3 先进 可自动分析金属材料中碳、硫的含量
锰、磷、硅微机自动分析仪
HCA-3B 1台 无锡 96.3 先进 可自动分析金属材料中的锰磷硅的含
量
光电天平 TG328A 1台 上海 96.3 先进 用于金属分析辅助
称重
电热恒温干燥箱
GZX-DH 1台 上海 96.3 先进 用于金属分析、化验辅助保温及烘干
分光光度计(光谱分析仪)
721型 1台 上海 96.4 先进 可分析金属中各种合金成分的含量
验钢镜 WKX型 (0.1毫克) 1台 贵阳 96.4 先进
可用于区分不同金属材料光谱特征以区分混料或定性鉴别
数字式测温仪 TES1310-K 3台 台湾 96.8 先进 用于锌液温度测试
超声波探伤仪 CTS-26 4台 南通 97.6 先进 超声波探伤
万能试验机 WE-600 (一级) 1台 济南 97.7 先进
材料机械性能中拉、压、弯、剪
锌层厚度测试仪
TT220型(时代) MINTEST-50
(德国)
1台 1台
北京 德国
99.8
96.8 先进
锌层厚度
锌层厚度
X射线探伤 XXQ-3005 2台 丹东 2000.11 先进 射线探伤
冲机试验机 JB-300 1 台 济南 2002.6 先进 冲击韧性
漆膜测厚仪 FBMK-2 2 台 上海 2003.6 先进 检测漆膜厚度
激光检测器 D600 1 台 瑞典 2006.1 先进 检测法兰平面度
Qingdao Wuxiao Group Co., Ltd Prequalification Document
37
Ⅴ Major Testing Equipments
Description Spec Qty Origin Time Status Function
High speed carbon sulphur analyzer HB-4B 1 Unit Wuxi 3/96 AdvancedMetal automatic analysis of carbon, sulfur
content Automatic analysis instrument of phosphorus silicon manganese
HCA-3B 1 Unit Wuxi 3/96 AdvancedThe automatic analysis of manganese, phosphorus and silicon metal content
Photoelectricty balance TG328A 1 Unit Shanghai 3/96 Advanced Weighing support for metals analysis
Electrothermal furnace GZX-DH 1 Unit Shanghai 3/96 AdvancedFor metal analysis, laboratory support and drying insulation weighing support for the
analysis of metal Light photometer (optical spectrum analyzer)
721 type 1 Unit Shanghai 4/96. AdvancedVarious metal alloys can be analyzed by
HPLC
WKX WKX type (0.1 mg)
1 Unit Guiyang 4/96 AdvancedCan be used to distinguish between different metals or identification of spectral features to
distinguish the mixture
Digital temperature meter TES1310-K 3 Unit Taiwan 8/96 Advanced Zinc for temperature tests
Ultrasonic flaw detector CTS-26 4 Unit Nantong 6/97 Advanced Ultrasonic Inspection
Universal testing machine WE-600 ( First class
level ) 1 Unit Jinan 7/97 Advanced
Mechanical properties and Latin America, pressure, bending, shearing
Dial gauge TT220 type 1 Unit Beijing 8/99 Advanced Zinc coating thickness
Zinc thickness tester MINTEST-50 ( Germany )
1 Unit Germany 8/96 Advanced Zinc coating thickness
Qingdao Wuxiao Group Co., Ltd Prequalification Document
38
Description Spec Qty Origin Time Status Function
Xray flaw tection machine XXQ-3005 2 Unit Dandong 11/2000 Advanced Ray Inspection
Compactor JB-300 1 Unit Jinan 6/2002 Advanced Toughness
Paint film thickness gauge FBMK-2 2 Unit Shanghai 6/2003 Advanced Detection of coating thickness
Laser detector D600 1 Unit Sweden 1/2006 Advanced Detection flange flatness
Qingdao Wuxiao Group Co., Ltd Prequalification Document
39
六、风塔工艺 1.工艺流程 Process
Qingdao Wuxiao Group Co., Ltd Prequalification Document
40
卷板机 W11SNC 30-3500 卷板机 W11SNC 70-3600 Press Bending Machine Press Bending Machine
焊接操作机 CZ12-5-5Z 纵缝焊接设备
Welding operating machine Longitudinal seam welding
空气压缩机 塔筒组对车
Compressor Assembly work unit
Qingdao Wuxiao Group Co., Ltd Prequalification Document
41
喷 漆 地锚焊接
Painting Anchor Bolt Welding
环缝焊接 抛丸除锈机
Ring Seam Welding Sand Blasting
切割下料 剪板机
CNC Blanking Plate Shearing Machine
Qingdao Wuxiao Group Co., Ltd Prequalification Document
42
主 要 检 测 设 备
锰磷硅微机自动分析仪 冲击实验机
Auto manganese, phosphorus, Compactor silicon analyzer
红外碳硫分析仪
Carbon Sulphur Analyzer
万能材料试验机(600KN) Universal Material tester
Qingdao Wuxiao Group Co., Ltd Prequalification Document
43
超声波探伤仪 磁粉探伤仪
Ultra-sonic flaw testing MT
X 射线探伤仪 X-Ray Flaw Tester
激光测平仪
Laser Level Meter
Qingdao Wuxiao Group Co., Ltd Prequalification Document
44
2. 质量计划(此计划只针对国内某一工程,客户可参考)
工程名称: 大唐赤峰赛罕坝三期工程 编制: 质检科 时间:2006.5.19
工序 检验内容 责任人 执行标准 提交文件 认可
合同评审与技
术准备
开工之前熟悉对方提供的图纸及技术资料,对
人员、设备及制造工艺等方面做好充分的准备
以确保满足对方要求。
项目经理 王呈海 QS990508, 3.1
焊接工艺评定对主材焊缝(筒体、法兰、门框等)、主材与附
件之间焊缝进行焊接工艺评定 焊接工程师 张玉修 AWSD1.1、JB4708-2000
WPS、PQR 及焊接施工
计划
无损检测规范
对每种检测方法写出其使用范围、参考文献、
人员资格、检验水平、检测仪器、检测技术、
缺陷判定、验收标准及检测报告。
NDT II 级人员 韩富田 AWSD1.1、JB4730-2005无损检测规范
原材料检测及
证书核实
检测材质等级、规格尺寸及表面状况并材质核
实证书 质量工程师 那敏 QS990508, 4.1 检测报告
塔架编号 按 VESTAS 提供的编号进行编号 焊接责任人 李克军 QS990508, 4.2
材料标识 从下料工序开始对板材进行标识 质量工程师 那敏 QS990508, 4.1 材料可追溯性记录表
焊缝编号 对主材每道焊缝与其焊工及焊接工艺一一对应
编号记录 焊接责任人 李克军 QS990508, 4.3 焊缝编号表单
焊前及焊接过
程检查
焊前检查焊工证、焊接工艺、母材及焊材质量
证明、坡口形状及尺寸、点对预焊以及环境状
况等;焊接过程中检查焊接主参数如电流、电
压及焊接速度、焊道清理、焊接顺序及焊材选
用等。
焊接工程师 张玉修 QS990508, 4.4 检查报告
Qingdao Wuxiao Group Co., Ltd Prequalification Document
45
续表
工程名称: 大唐赤峰赛罕坝三期工程 编制: 质检科 时间:2006.5.6
工序 检验内容 责任人 执行标准 提交文件 认可
焊缝外观检查 所有焊缝进行 100%外观检测 VT II 级人员 曾先涛 AWSD1.1 表 6.1 VT 检查报告
焊缝磁粉探伤检测 在图纸中指定的焊缝进行磁粉探伤检
测。 MT II 级人员 张信义 AWSD1.1、JB4708-2000 MT 检测报告
焊缝超声波探伤检测 对主材对接焊缝进行超声波探伤检测 UT II 级人员 韩富田 AWSD1.1、JB4730-2005 UT 检测报告
砂箱气密性试验 按指定大气压下进行砂箱气密性试验 焊接责任人 李克军 AWSD1.1、JB4730-2005 试验报告
几何尺寸检测 对底法兰、门框、顶部塔筒及筒体进行
几何尺寸检测。 质量工程师 那敏 QS990508, 4.9、4.10 尺寸检测报告
表面状况检查 表面处理之前检查表面状况 质量工程师 那敏 QS990508, 4.11
焊件放行 焊接放行进入下道工序之前所有检测必
须合格 质量工程师 那敏 QS990508, 5.0 质量说明文件
Qingdao Wuxiao Group Co., Ltd Prequalification Document
46
Quality Plan(It is for china domestic project, all our customer may check it) Project: Datang Chifeng Composed by: QC section Date:19/5/2006
Production Process Control Point Duty person Standard submittal Approval
Contract/technical Preparation
DWGs and other technical documents/requirements
Project Manager
Wang Chenghai
QS990508, 3.1
Evaluation of Welding Process
Main parts(tower, flange, manhole frame) and connecting welding seam
Welding Engineer
Zhang Yuxiu
AWSD1.1、JB4708-2000
WPS、PQR
NDT Regulation Operator qualification, Equipments and
standards. NDT staff
Han Futian
AWSD1.1、JB4730-2005
NDT Regulation
Material Quality Assurance
Mill certificate,and visual quality QC Engineer Na Min QS990508, 4.1 Report
Coding for the Towers In accordance with the requirement of Owner.Welding
Duty Person Li Kejun QS990508, 4.2
Material Marking Marking will be initiated from the first step of
process. QC Engineer Na Min QS990508, 4.1 Record
Coding for the Seam Detailing records of welding process and
welders Welding
Duty Person Li Kejun QS990508, 4.3 coding sheet
Welding Quality Assurance
Welders, welding materials, welding process, welding finishes etc.
Welding Engineer
Zhang Yuxiu
QS990508, 4.4 Report
Qingdao Wuxiao Group Co., Ltd Prequalification Document
47
Project: Datang Chifeng Composed by: QC section Date:6/5/2006
Production Process Control Point Duty person Standard submittal Approval
welding seam visual checking
visual checking for all the welding seam. VT staff Zeng
XiantaoAWSD1.1表6.1 VT Report
MT MT for designated parts. MT staff Zhang Xinyi
AWSD1.1、JB4708-2000
MT Report
UT For jont welding of main parts. UT staff Han
Futian AWSD1.1、
JB4730-2005UT Report
Airtightness for Casting Box
Under certain air pressure. Welding
Duty Person Li Kejun
AWSD1.1、JB4730-2005
Test Report
Dimension Bottom flange, manhole frame, top tower
section, and tower body. QC Engineer Na Min
QS990508, 4.9、4.10
check Report
Visual Check Before outerier finish. QC Engineer Na MinQS990508,
4.11
Handover All the control points must be met before
handover to next step. QC Engineer Na Min QS990508, 5.0 Quality Document
Qingdao Wuxiao Group Co., Ltd Prequalification Document
48
3. 生产、运输计划
Qingdao Wuxiao Group Co., Ltd Prequalification Document
49
3. Production and Delivery Schedule
Qingdao Wuxiao Pipe Manufacturing Co.,Ltd Serial No:sc06-10
Time:October 2006 Production plan 1 p. p. 1
No. Projects Contract
No.
FeedingInto
conesGroup
Central
Welding
Annex
rivetingDerustingPainting
Interior
installationShipment Remarks
1 Datang Chifeng
Saihan dam 060427B 53
1~20
20unit
1~31
31unit
2 Huan Ren 060105A
29
1~31 17unit
3 Tongyu of Jilin 060110A 58 1~31
10unit
1~31
4unit
4 Inner Mongulia 060518A 16 25~31
6unit
Composed by/Date: Checked by/Date Approved by/Date:
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 50 页
4.焊接工艺指导书
单位名称 青岛武晓制管有限公司
焊接工艺指导书编号 WPS-06-04 日期 2006.05.15 焊接工艺评定报告编号 PQR-06-04
焊接方法 FCAW 机械化程度 半自动
焊接接头:
坡口形式 X
衬垫(材料及规格) 无
其他 /
焊缝简图:
母材:
类别号 VI 组别号 VI--2 与类别号 VI 组别号 VI--2 相焊及
标准号 GB/T1591--94 钢 号 Q345D 与标准号 GB/T1591—94 钢 号 Q345D 相焊
厚度范围:
母材: 对接焊缝 15----40mm 角焊缝 不限
管子直径、壁厚范围:对接焊缝 15----40mm 角焊缝 不限
焊缝金属厚度范围: 对接焊缝 ≦40mm 角焊缝 不限
其他 /
焊 接 材 料:
焊材类别 药芯焊丝
焊材标准 GB/T10045--2001
填充金属尺寸 Ф1.2MM
焊材型号 E501T-1
焊材牌号 YJ501--1
其他 /
耐蚀堆焊金属化学成分(%)
C Si Mn P S Cr Ni Mo V Ti Nb
/ / / / / / / / / / / /
其他:
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 51 页
焊接位置:
对接焊缝位置 平
焊接方向:(向上、向下) /
角焊缝位置 /
焊接方向:(向上、向下) /
焊后热处理:
温度范围(°C) /
保温时间 (h ) /
预热:
预热(°C) /
层间温度(°C) ≦100℃
保持预热时间 /
加热方式 /
保护气体:
气体种类 混合比 流量(L/min)
保护气 CO2 / 15~20
尾部保护气 / / /
背面保护气 / / /
电特性:
电流种类: DC 极性 反 接
焊接电流范围(A) 200--250 电弧电压(V) 28--32
填充材料 焊接电流(A) 焊 道 /
焊层
焊接方法
牌号 直径 极性 电流
电弧电压
(V)
焊接速度
cm/min
线能量
KJ/cm
首层 FCAW YJ501-1 Ф1.2 DCEP 200~230 28~30
其它 FCAW YJ501-1 Ф1.2 DCEP 230~250 30~32
钨极类型及直径 / 喷嘴直径(mm) /
熔滴过渡形式 滴状过渡 焊丝送进速度(cm/min) /
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 52 页
技术措施:
摆动焊或不摆动焊 摆动 摆动参数 3~5mm
焊前清理和层间清理 磨光机打磨 背面清根方法 碳弧气刨
单道焊或多道焊(每面) 多道焊(每面 3~4 道) 单丝焊或多丝焊 单丝焊
导电嘴至工件距离(mm) 15—20mm 锤击 /
其他 / /
编制 张 玉 修 审核 葛 宝 荣 批准 王 成 海
WELDING PROCEDURE SPECIFICATION (WPS) Yes √ Page1
PREQUALIFIED QUALIFIED BY TESTING
Or PROCEDURE QUALIFICATION RECORD (PQR) Yes .
Identification #: GESJ-04 Rev: 0
Date : 08-Jul-05 By : Sun
Jianqiang
Company Name Qingdao Wuxiao Tube Making Co.,Ltd Authorized by: Wang Chenghai Date:
08-Jul-05
Welding process (es) FCAW Type------Manual
Semi-automatic √ .
Supporting PQR NO.(s) GEPD-04 Machine
Automatic .
JOINT DESIGN USED POSITION
Type : square groove Position of Groove: Flat
Fillet:
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 53 页
Single Double Weld √ Vertical progression: Up Down .
Backing: Yes √ No Backing material: ELECTRICAL
CHARACTERISTICS Root Opening 1~2 mm Root Face Dimension 2mm Transfer Mode (FCAW) Short
Circuiting .
Groove Angle 60° Radius (J-U) Globular Spray
√ .
Back Gouging: Yes √ No Current: AC DCEP√DCEN PULSED .
Method: FCAW Other
Tungsten Electrode (GTAW)
BASE MATERIALS Size: None
Material Spec. GB/T1591--1994 Type: None
Type or Grade Q345D
Thickness 20 mm TECHNIQUE
Diameter(Pipe) None Stringer or Weave Bead
Multi-pass or Single pass (per side)
Multiple
Stud Number of electrodes Single
Material Spec. Electrode spacing Longitudinal
Diameter Lateral
Angle
SHIELDING Flux Gas CO2 Contact Tube To Work Distance
15~20mm
Composition Peening None
Flow Rate 20~25L/Min Gas cup size None Interpass Cleaning Grinding and
chisel
Electrode-Flux (Class) None
PREHEAT POSTWELD HEAT TREATMENT
Preheat Temp. , Min None Temp. None
Interpass Temp. , Min None Max None Time. None
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 54 页
Filling material Pass or
layers
Weld
process Wire type Diam.
power
Polarity
Current
(A)
Volts
(V)
Speed
(cm/min) Joint
detail
1 FCAW YJ502(Q) φ
1.2mmDCEP 160—200 26-30
2~n FCAW YJ502(Q) φ
1.2mmDCEP 180—220 26-30
3~n FCAW YJ502(Q) φ
1.2mmDCEP 180--220 26-30
See attached
map
Attachment
Illustrution of groove & weld
5. 焊接工艺评定报告
单位名称: 青岛武晓制管有限公司
焊接工艺评定报告编号: PQR-06-04 焊接工艺指导书编号: WPS-06-04
焊接方法: FCAW 机械化程度: 半自动
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 55 页
接头简图:
焊后热处理:
热处理温度(°C): /
保温时间(h): /
母材:
材料标准 GB/T 1591----94
钢号: Q345D
类、组别号:VI、Ⅵ—2 与类、组别号: VI、Ⅵ--2 相焊
厚度: δ=20mm
直径: /
其他: /
保护气体:
气体 混合比 流量(L/mm)
保护气体: CO2 / 20--25
尾部保护气: / / /
背部保护气: / / /
填充金属:
焊材标准: GB/T10045--2001
焊材牌号: YJ501--1
焊材规格: φ1.2mm
焊缝金属厚度: 20mm
其他: /
电特性:
电流种类: 直 流
极性: 反 接
钨极尺寸: /
焊接电流(A): 首层:220 其它:245
电弧电压(V): 首层:30 其它: 32
其他: 焊丝干伸长度 15—20mm
焊接位置:
对接焊缝位置: 平 方向:(向上、向下)
角焊缝位置: / 方向:(向上、向下)
预热:
预热温度(°C): /
层间温度(°C): ≦100℃
其他: /
技术措施:
焊接速度(cm/min): /
摆动或不摆动: 摆动焊
摆动参数: 3~5mm
多道焊或单道焊(每面): 多道焊
多丝焊或单丝焊: 单丝焊
其他 : 背面焊前清焊根
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 56 页
拉伸试验 试验报告编号: T--04
试样编号 试样宽度
(mm)
试样厚度
(mm)
横截面积
(mm²)
断裂载荷
(KN)
抗拉强度
(Mpa)
断 裂 部 位
和特征
01 25 20 500 247.6 550 母 材
02 25 20 500 235 535 母 材
弯曲试验 试验报告编号: B--04
试样编号 试样类型 试样厚度
(mm)
弯心直径
(mm)
弯曲角度
(°) 试验结果
03 侧弯 10 40 180 完 好
04 侧弯 10 40 180 完 好
05 侧弯 10 40 180 完 好
06 侧弯 10 40 180 完 好
冲击试验 试验报告编号: I--04
试样编号 试样尺寸 缺口类型 缺口位置 试验温度
(°)
冲击吸收功
(J) 备 注
07 10*10*55 V 型 焊 缝 -20° 118
08 10*10*55 V 型 焊 缝 -20° 78
09 10*10*55 V 型 焊 缝 -20° 105
10 10*10*55 V 型 热影响区 -20° 37
11 10*10*55 V 型 热影响区 -20° 35
12 10*10*55 V 型 热影响区 -20° 50
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 57 页
金相检验(对接焊缝):
在焊缝区、热影响区及焊缝根部均未发现有未熔合、气孔、夹渣、裂纹等缺陷。
硬度检验:
HB=169
检验截面 Ⅰ Ⅱ Ⅲ Ⅳ Ⅴ
结 果 合 格 / / / /
无损检验
VT 合 格 UT 合 格
MT 合 格 PT /
其他 / /
耐蚀堆焊金属化学成分(重量%)
C Si Mn P S Cr Ni Mo V Ti Nb
/ / / / / / / / / / /
分析表面或取样开始表面至熔合线的距离(mm): 2mm
附加说明:
结论:本评定按 AWSD1.1—2002 规定,焊接试件、检验试样、测定性能、确认试验记录正确
评定结果: 合 格
焊工
姓名 刘 新 春
焊工
代号 09 施焊日期 2006.5.17
编 制 张 玉 修 审 核 葛 宝 荣 批 准 王 成 海
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 58 页
日 期 2006.05.20 日 期 2006.05.20 日 期 206.05.20
第 三
方 检
验
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 59 页
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 60 页
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 61 页
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 62 页
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 63 页
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 64 页
6.无损检验规范 Non-destructive Testing Regulations
6.1 无损超声波检测规程 Non-destructive UT Testing Regulations
6.2 着色检测规程 Coloration Testing Regulations
6.3 磁粉检验规程 MT Testing Regulations
6.4 射线检测规程 X-ray Testing Regulations
7.技术规范 (Technical Requirement)
7.1 中国风力发电塔架制作标准
China Production Standard for wind turbine tower
7.2 客户图纸和要求
The customer’s drawings and requirements
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 65 页
8.焊工名单
序号 姓 名 资质 证书编号
1 曹明路 压力容器焊工证 HJ37020020050094
2 于振江 压力容器焊工证 HJ37020020050101
3 王洪彬 压力容器焊工证 HJ37020020050102
4 代成祥 压力容器焊工证 HJ37020020050095
5 邱志军 压力容器焊工证 HJ37020020050096
6 陈贤良 压力容器焊工证 HJ37020020050098
7 徐辉 压力容器焊工证 HJ37020020050099
8 邵玉超 压力容器焊工证 HJ37020020050097
9 赵方朋 压力容器焊工证 HJ37020020050091
10 李先雨 电焊工职业资格证 0615021021100028
11 杜以敏 电焊工职业资格证 0615021021100027
12 刘玉伦 电焊工职业资格证 0615021021100026
13 戚永前 电焊工职业资格证 0615021021100023
14 刘宗光 电焊工职业资格证 0615021021100035
15 武良彬 电焊工职业资格证 0615021021100029
16 刘波 电焊工职业资格证 0615021021100039
17 闫铭 电焊工职业资格证 0615021021100066
18 毕泗兴 电焊工职业资格证 0615021021100024
19 刘宗学 电焊工职业资格证 0615021021100037
20 贾亮 电焊工职业资格证 0615021021100025
21 刘关广 电焊工职业资格证 0615021021100043
22 郭旭东 电焊工职业资格证 0615021021100041
23 周忠华 电焊工职业资格证 0615021021100032
24 李燕星 电焊工职业资格证 0615021021100036
25 姜兆勇 电焊工职业资格证 0615021021100061
26 姜可太 电焊工职业资格证 0615021021100053
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 66 页
27 崔磊 电焊工职业资格证 0615021021100049
28 王新忠 电焊工职业资格证 0615021021100045
29 郭衍萍 电焊工职业资格证 0615021021100033
30 冯军 电焊工职业资格证 0615021021100030
31 鞠文民 电焊工职业资格证 0615021021100064
32 马俊岩 电焊工职业资格证 0615021021100059
33 田庆国 电焊工职业资格证 0615021021100057
34 李玉强 电焊工职业资格证 0615021021100051
35 于世利 电焊工职业资格证 0615021021100047
36 鲁张全 电焊工职业资格证 0615021021100034
37 王启松 电焊工职业资格证 0615021021100031
38 李明帅 电焊工职业资格证 0615021021100062
39 刘海山 电焊工职业资格证 0615021021100058
40 张燕朋 电焊工职业资格证 0615021021100046
41 高洪胜 电焊工职业资格证 0615021021100050
42 曹明立 电焊工职业资格证 0615021021100052
43 毕宏伟 电焊工职业资格证 0615021021100056
44 郭怀普 电焊工职业资格证 0615021021100044
45 卢刚 电焊工职业资格证 0615021021100060
46 韩顺贤 电焊工职业资格证 0615021021100065
47 王坤 电焊工职业资格证 0615021021100048
48 陈丙江 电焊工职业资格证 0615021021100054
49 崔宗波 电焊工职业资格证 0615021021100055
50 高举绪 电焊工职业资格证 0615021021100042
51 陈海伦 电焊工职业资格证 0615021021100040
52 刘宗学 电焊工职业资格证 0615021021100037
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 67 页
List of Welders NO NAME CERTIFICATE REGISTRATION NO
1 Cao Lubing Boiler HJ37020020050094
2 Yu Zhenjiang Boiler HJ37020020050101
3 Wang Hongbin Boiler HJ37020020050102
4 Dai Chenxiang Boiler HJ37020020050095
5 Qiu Zhijun Boiler HJ37020020050096
6 Chen Xianlian Boiler HJ37020020050098
7 Xu Hui Boiler HJ37020020050099
8 Shao Yuchao Boiler HJ37020020050097
9 Zhao Fangpeng Boiler HJ37020020050091
10 Li Xianyu Welder Qualification 0615021021100028
11 Du Yimin Welder Qualification 0615021021100027
12 Liu Yulun Welder Qualification 0615021021100026
13 Qi Yongqian Welder Qualification 0615021021100023
14 Liu Zongguang Welder Qualification 0615021021100035
15 Wu Liangbin Welder Qualification 0615021021100029
16 Liu Bo Welder Qualification 0615021021100039
17 Yan Ming Welder Qualification 0615021021100066
18 Bi Sixin Welder Qualification 0615021021100024
19 Liu Zongxue Welder Qualification 0615021021100037
20 Jia Liang Welder Qualification 0615021021100025
21 Liu Guanguang Welder Qualification 0615021021100043
22 Guo Xudong Welder Qualification 0615021021100041
23 Zhu Zhonghua Welder Qualification 0615021021100032
24 Li Yanxing Welder Qualification 0615021021100036
25 Jiang zhaoyong Welder Qualification 0615021021100061
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 68 页
26 Jiang Taike Welder Qualification 0615021021100053
27 Cui Lei Welder Qualification 0615021021100049
28 WangXingong Welder Qualification 0615021021100045
29 Guo Yanping Welder Qualification 0615021021100033
30 Fengjun Welder Qualification 0615021021100030
31 Ju wenmin Welder Qualification 0615021021100064
32 Ma Junyan Welder Qualification 0615021021100059
33 Tian qingguo Welder Qualification 0615021021100057
34 Li yuqiang Welder Qualification 0615021021100051
35 Yu Shili Welder Qualification 0615021021100047
36 Lu zhangquan Welder Qualification 0615021021100034
37 Wang Qisong Welder Qualification 0615021021100031
38 Li Mingshuai Welder Qualification 0615021021100062
39 Liu Haishan Welder Qualification 0615021021100058
40 Zhang Yanmin Welder Qualification 0615021021100046
41 Gao Hongshen Welder Qualification 0615021021100050
42 Cao Mingli Welder Qualification 0615021021100052
43 Bi Hongwei Welder Qualification 0615021021100056
44 Guo Huaipu Welder Qualification 0615021021100044
45 Lu gang Welder Qualification 0615021021100060
46 Han Shunxian Welder Qualification 0615021021100065
47 Wangkun Welder Qualification 0615021021100048
48 Chen bingjiang Welder Qualification 0615021021100054
49 CuiZongbo Welder Qualification 0615021021100055
50 Gao Jie Welder Qualification 0615021021100042
51 Chen Hailun Welder Qualification 0615021021100040
52 Liu zongxue Welder Qualification 0615021021100037
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 69 页
9.无损检测人员名单
序号 姓名 资质
1 韩富田 RT 二级、UT 二级
2 崔迎新 UT 二级
3 张信义 RT 二级、MT 二级、PT 二级
4 王希禄 RT 二级
5 张林旭 MT 二级、PT 二级
6 王树展 UT 二级
7 姜述德 UT 二级
9. NDT Staff
NO NAME CERTIFICATE Remark
1 Hanfutian RT(G2)UT(G2)
2 Cuiyingxin UT(G2)
3 Zhangxinyi RT(G2)、MT(G2)、PT(G2)
4 Wangxilu RT(G2)
5 Zhanglinxu MT(G2)、PT(G2)
6 Wangshuzhan UT(G2)
7 Jiangshude UT(G2)
10.主要材料供方清单
主要材料 供 货 厂 家
筒体板材 安阳钢厂、首钢、舞阳钢厂
底法兰 首钢
门框 鞍山钢厂或舞阳钢厂
油漆 式玛卡龙牌、海虹牌
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 70 页
锻造法兰 韩国平山
法兰联接螺栓 我方不提供(或我们代客户采购)
10. Major material supplier list
Description Approved Providers
tower plate Anyang Steel, Shougang Steel, Wuyang Steel
Bottom Flange Shougang Steel
Man Hole Frame Anshan Steel or Wuyang Steel
Paint Sigmakalon, Haihong
Forged Flange Pyeong San Metal Co., Ltd,
Bolts for flanges We don’t provide them( or we can purahse for our
customer)
七、业绩表
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 71 页
近三年750KW及以上塔筒业绩汇总表
序 用户及工程名称 机组 规格 成套/ 数量 投运 完成
建设单位 项目名称 建设规模 开竣工日期 设计方
赤峰达里风电场 赤峰达里风电场项目750KW
8 基 2003 年 5 月
—2003 年 12 月 NEG
黑龙江华富风力发
电富锦有限公司 黑龙江富锦风电场
项目 900KW 10 基
2004 年 1 月
—2004 年 6 月 NEG
栖霞市润霖风电发
展有限公司 唐山棚风电场项目
600KW 8 基
2004 年 4 月
—2004 年 9 月 金风科技
广东粤电公司 广东惠莱石碑山风电
场项目 600KW 63 基
2005 年 1 月
—2005 年 12 月 金风科技
华能新能源产业控
股有限公司 华能洮北风电场项目
850KW 30 基
2005 年 2 月—
—2005 年 10 月 Gamesa
黑龙江华富风力发
电穆棱有限公司 黑龙江穆棱风电场
项目 1300KW
10 基 2005 年 5 月
—2005 年 11 月 Nordex
张北国投风力发电
厂 张北满井风电场项目
1500KW 15 基
2005 年 4 月
—2006 年 5 月 GE
吉林辽源风力发电
有限公司 吉林通榆风电场项目
850KW 50 基
2006 年 1 月
—2007 年 6 月 Gamesa
辽宁桓仁龙源风力
发电有限公司 牛毛大山风电场项目
850KW 29 基
2006 年 1 月
—2006 年 9 月 Gamesa
赤峰新胜风力发电
有限公司 内蒙古自治区翁牛特
旗风电场一期项目 750KW 25 基
2006 年 4 月
—2006 年 8 月 金风科技
北京国际电力新能
源有限公司
内蒙古辉腾锡勒风电
场100MW风电特许权
项目
750KW 21 基
2006 年 6 月
—2006 年 9 月 金风科技
大唐吉林瑞丰新能
源发电有限公司 大唐吉林双辽风电场
一期工程 850KW 29 基
2006 年 3 月
—2006 年 9 月 Gamesa
大唐赤峰赛罕坝风
力发电有限责任公
司
大唐赤峰赛罕坝风电
场三期工程 850KW 53 基
2006 年 3 月
—2006 年 9 月 VESTAS
国华能源投资有限
公司 国华呼伦贝尔新右旗
49.5MW 风电场项目 1500KW
16 基 2006 年 5 月
—2006 年 10 月 REPOWER
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 72 页
号 类型 参数 配套 时间 情况
1 大唐锡林郭勒风力发
电有限责任公司 东汽
1500
KW 成套
33
基
2008
年 良好
2 大唐赤峰赛罕坝风力
发电有限责任公司 东汽
1500
KW 成套
16
基
2008
年 良好
3 内蒙古北方龙源风力
发电有限责任公司 华锐
1500
KW 成套
15
基
2008
年 良好
4 大唐赤峰赛罕坝风力
发电有限责任公司 Vestas
850K
W 成套
53
基
2006
年 良好
5 华电内蒙古辉腾锡勒
风力发电有限公司 Gamesa
850K
W 成套
40
基
2007
年 良好
6 张北国投风力发电厂 GE 1500
KW 成套
15
基
2006
年 良好
7 国华呼伦贝尔风电有
限公司 东汽
1500
KW 成套
16
基
2006
年 良好
8 国华(东台)风电有
限公司 GE
1500
KW 成套
20
基
2007
年 良好
9 国华(齐齐哈尔)风
电有限公司 华锐
1500
KW 成套
17
基
2007
年 良好
10 华能新能源产业控股
有限公司 Gamesa
850K
W 成套
30
基
2005
年 良好
11 辽宁桓仁龙源风力发
电有限公司 Gamesa
850K
W 成套
29
基
2006
年 良好
12 吉林龙源风力发电有
限公司 Gamesa
850K
W 成套
58
基
2007
年 良好
13 大唐吉林瑞丰新能源
发电有限公司 Gamesa
850K
W 成套
29
基
2006
年 良好
14 辽宁龙源法库风力发
电有限责任公司筹备
组
Gamesa850K
W 成套
24
基
2007
年 良好
15 大唐漳州六鳌风力发
电有限责任公司 苏司兰
1250
KW 成套
36
基
2006
年 良好
16 铁岭龙源风力发电有
限公司 Gamesa
850K
W 成套
28
基
2007
年 良好
Qingdao Wuxiao Group Co., Limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel: +86-532-81120580; Fax:+86-532-82275396; M.P.:+86-13792494926
http://www.wuxiao.cn E-mail:[email protected] 第 73 页
17 浙江风力发电发展有
限责任公司 Vestas
850K
W 成套 6 基
2007
年 良好
18 吉林龙源风力发电有
限公司 Vestas
850K
W 成套
60
基
2006
年 良好
19 河北围场龙源风力发
电有限公司(张家湾) 金凤
1500
KW 成套
16
基
2008
年 良好
20 河北围场龙源风力发
电有限公司(山湾子) 金凤
1500
KW 成套
17
基
2008
年 良好
21 越南再生能源股份有
限风电塔筒
shurld
aner
1500
KW 成套 5 基
2008
年 良好
22 长江新能源开发有限
公司江苏响水 201MW
风电场风力发电机
东汽 1500
KW 成套
64
基
2008
年 良好
23
山东鲁能物资集团有
限公司乌拉特中旗风
电场 750KW 风机塔筒
浙江运
达
750K
W 成套
20
基
2008
年 良好
24 龙源巴彦淖尔风力发
电有限责任公司 Gamesa
850K
W 成套
38
基
2008
年 良好
25
内蒙古北方龙源风力
发电有限公司锡盟灰
腾梁
华锐 1500
KW 成套
15
基
2008
年 良好
26
河北建投新能源公司
河北围场御道口风电
场
华锐 1500
KW 成套
50
基
2009
年
Qingdao Wuxiao Group Co., limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel:86-532-81120580; Fax:86-532-82275396 ; M.P.:+86-13792494926
第 74 页 http://www.wuxiao.cn E-mail:[email protected]
Sales Performance of Wind turbine tower(QWGC)
No. Project Name and Customer Name Qty (Set) Spec. Hub Height
(M) Contract
Time Delivery Time Wind Turbine
HeiLong jiang FuJin Wind Farm First Project 1
HeiLong jiang FuJin Wind Power Co., Ltd.8 900kW 65 04.3.13 2004.6.10—2004.8.10 NEG
Tang Shanpeng Wind farm Project 2 ShanDong QiXia RunLin Wind power
development Co., Ltd. 8 600kW 49.5 04.8.8 2004.9.15—2004.10.10 GoldWind
GuangDong Yuedian Shi Beishan Wind farm Project 3
GuangDong Yuedian Corporation 63 600kW 65 05.1.24 2005.6--2005.12 GoldWind
HuaNeng ZhaoBei Wind farm project 4
HuaNeng New Energy Holding Co., Ltd. 30 850kW 65 05.2.1 2005.4.10--2005.6.15 Gamesa
Zhang Bei ManJing Wind farm Project 5 ZhangBei GuoTou Wind Power
Corporation 15 1500kW 65 05.4.11 2005.7.1--2006.5.20 GE
HeiLong jiang Muleng Wind farm, Ⅰ Project 6
HeiLong jiang HuaFu Wind Power Muleng Co., Ltd.
10 1300kW 65 05.5.30 2005.8.5--2005.11.30 Nordex
7 LiaoNing HuanRen Wind power, NiuMao
29 850kW 55 06.1.5 2006.4.15--2007.6.15 Gamesa
Qingdao Wuxiao Group Co., limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel:86-532-81120580; Fax:86-532-82275396 ; M.P.:+86-13792494926
第 75 页 http://www.wuxiao.cn E-mail:[email protected]
Da shan Wind farm Project LiaoNing HuanRen LongYuan Wind Power
Corporation
No. Project Name and Customer Name Qty Spec. Hub Height(M)
Contract Time Delivery Time Wind
Turbine JiLin LongYuan TongYHu Wind farm
Concession ⅠProject 8 JinLin LongYuan Wind Power Corporation
58 850kW 65 06.1.10 2006.5.15--2006.9.15 Gamesa
Inner Mongolian Ongniod Banner Wind farm ⅠProject 9
ChiFeng XinSheng Wind Power Co., Ltd. 25 750kW 49.5 06.4.3 2006.4.20--2006.7.30 GoldWind
Inner Mongolian Phaeton-Le Wind farm Concession Project (100MW) 10
Beijing International Power New-energy Co., Ltd.
21 750kW 65 06.3.7 2006.6--2006.9 GoldWind
Datang JiLin ShuangLiao Wind farm ⅠProject 11
DaTang JiLin Runfeng New energy Co., Ltd.
29 850kW 70 06.3.24 2006.5.5--06.7.25 Gamesa
DaTang ChiFeng Sai Han ba Wind farm ⅢProject 12
DaTang ChiFeng Sai Han ba Wind Power Co., Ltd.
53 850kW 65 06.4.27 2006.3--2006.9 Vestas
13 GuoHua Hulun Buir 49.5MW Wind farm Project
16 1500kW 65 06.4.18 2006.6.10--2006.9.10 DEC
Qingdao Wuxiao Group Co., limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel:86-532-81120580; Fax:86-532-82275396 ; M.P.:+86-13792494926
第 76 页 http://www.wuxiao.cn E-mail:[email protected]
GuoHua Hulun Buir Wind Power Co., Ltd. LiaoNing Faku Wang Hai si Wind farm
ⅠProject 14 LiaoNing LongYuan Faku Wind Power
Corporation, preparatory group
24 850kW 55 06.8.24 2006.9.15--2007.3.20 Gamesa
Datang Zhangzhou LiuAo Wind farm ⅡProject 15
Datang Zhangzhou Wind Power Co., Ltd. 36 1250kW 74.5 06.12.19 2007.2.25--2007.3.15 Suzlon
HuaDian Inner Mongolian Phaeton-Le Wind farm Project 16
HuaDian Inner Mongolian Phaeton-Le Wind Power Co., Ltd.
40 850kW 55 06.12.21 2007.4.10--2007.9.10 Gamesa
TieLing LongYuan Chang Tu Quantou Wind farm Project 17
TieLing LongYuan Wind Power Corporation
28 850kW 65 07.1.10 2007.4.10--2007.11.15 Gamesa
Zhejiang CangNan Wind farm Reconstruction Project 4
18 Zhejiang Wind Power Development Co.,
Ltd. 2 850kW 65 07.2.9 2007.4.12--2007.5.15 Vestas
No. Project Name and Customer Name Qty Spec. Hub Height(M)
Contract Time Delivery Time Wind
Turbine JiLin LongYuan TongYHu Wind farm
Concession ⅡProject 19 JinLin LongYuan Wind Power Corporation
60 850kW 65 07.2.5 2007.5.15-2008.6.10 Gamesa
Qingdao Wuxiao Group Co., limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel:86-532-81120580; Fax:86-532-82275396 ; M.P.:+86-13792494926
第 77 页 http://www.wuxiao.cn E-mail:[email protected]
GuoHua DongTai Wind farm Project 20
GuoHua DongTai Wind Power Company 20 1500kW 70 07.4.5 2007.8.1--2007.9.20 GE
GuoHua Tsitsihar Wind farm Project 21
GuoHua Tsitsihar Wind Power Company 17 1500kW 70 07.4.9 2007.5.31--2007.10.18 Sinovel
Datang HuiTeng Liang Wind farm Ⅱ Project 22
Datang Xilin Gol Wind Power Co., Ltd. 33 1500KW 65 2007.6 2007.7.15-2007.9.20 DEC
No. Project Name Qty (Set) Spec.
Hub Height(M)
Customer Name Time
1 ZhangBei Manjing Wind farm Project
15 GE 1500KW
65
ZhangBei GuoTou Wind Power Corporation 2006
2 HuaNeng Zhaobei Wind farm Project
30 Gamesa 850KW
65 HuaNeng New Energy Holding Co., Ltd. 2005
3 JiLin LongYuan TongYHu Wind farm Concession ⅠProject
58 Gamesa 850KW
65
JinLin LongYuan Wind Power Corporation 2007
4 Datang JiLin Shuangliao Wind farm ⅠProject 29 Gamesa
850KW 65
DaTang JiLin Runfeng New energy Co., Ltd. 2006
5 DaTang ChiFeng Sai Han ba Wind farm Ⅲ Project 53 Vestas
850KW 65
DaTang ChiFeng Sai Han ba Wind Power Co., Ltd. 2006
6 GuoHua Hulun Buir Wind farm Project
16 REPOWER 1500KW
65 GuoHua Hulun Buir Wind Co., Ltd. 2006
Qingdao Wuxiao Group Co., limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel:86-532-81120580; Fax:86-532-82275396 ; M.P.:+86-13792494926
第 78 页 http://www.wuxiao.cn E-mail:[email protected]
7 LiaoNing Faku Wang Hai si Wind farm ⅠProject 24 Gamesa
850KW 65
LiaoNing LongYuan Faku Wind Power Corporation, preparatory group 2007
8 Datang Zhangzhou LiuAo Wind farm ⅡProject 36 Suzlon
1250KW
64.5 and 74.5
Datang Zhangzhou Wind Power Co., Ltd. 2006
9 HuaDian Inner Mongolian
Phaeton-Le Wind farm Project
40 Gamesa 850KW
55
HuaDian Inner Mongolian Phaeton-Le Wind Power Co., Ltd. 2007
10 TieLing LongYuan Chang Tu
Quantou Wind farm Project
28 Gamesa 850KW
65
TieLing LongYuan Wind Power Corporation 2007
11 Zhejiang CangNan Wind farm Reconstruction Project 6 Vestas
850KW 65
Zhejiang Wind Power Development Co., Ltd. 2007
12 JiLin LongYuan TongYHu
Wind farm Concession ⅡProject
60 Gamesa 850KW
65
JinLin LongYuan Wind Power Corporation 2006
13 GuoHua DongTai Wind farm Project
20 DEC 1500KW
70 GuoHua DongTai Wind Power Company 2007
14 GuoHua Tsitsihar Wind farm Project
17 Sinovel 1500KW
70 GuoHua Tsitsihar Wind Power Company 2007
15 Datang HuiTeng Liang Wind farm Ⅱ Project 33 Sinovel
1500KW 65 Datang Xilin Gol Wind Power Co., Ltd. 2008
16 DaTang ChiFeng KeQi Dali Wind farm Ⅴ Project 16 DEC
1500KW 65
DaTang ChiFeng Sai Han ba Wind Power Co., Ltd. 2008
17 Guandong Yuedian Zhanjiang XuWen Yangqian Wind farm 13 MingYang15
00kW 70 Guandong Yuedian Zhanjiang Wind Power Development Co., Ltd. 2008
Qingdao Wuxiao Group Co., limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel:86-532-81120580; Fax:86-532-82275396 ; M.P.:+86-13792494926
第 79 页 http://www.wuxiao.cn E-mail:[email protected]
Project
18 HuaNeng ZhenLai Mali Wind farm Project 22 Sinovel
1 500KW 70
JiLin HuaNeng Renewable Energy Co., Ltd. 2008
19 Datang Zhangzhou Wind farm ⅢProject 13 XD Group
2000KW 70
Datang Zhangzhou Wind Power Corporation 2008
20 Heibei Jiantou Dongxin Ying and ChongLi Wind farm Project
96 DEC1.5MWVestas850KW
61.5+52
HeBei Jiantou New Energy Co., Ltd. 2008
21 HeBei Jiantou Yudaokou Wind farm Project 50 Sinovel
1500KW 65 HeBei Jiantou New Energy Co., Ltd. 2008
22 Datang JiLin Xiangyang Wind farm Project 40 MingYang
1500KW 70 Datang JiLin Xiangyang Wind Power Co., Ltd. 2008
23 DaTang JiLin ShuangLiao Wind farm Project 33 GoldWind
1500KW 70 DaTang JiLin Runfeng New energy Co., Ltd. 2008
24 HeBei Datang International FengNing Batou Wind farm Project
24 XD Group1500KW 70 Datang International Power Stock Co.,
Ltd. 2008
25 Hebei Yudaokou Wind farm 150MW Concession Project 50 Sinovel
1500KW 65 HeBei Jiantou New Energy Co., Ltd. Yudaokou Branch Company 2009
26 GuoHua Chicheng First Wind farm Project, (Bing Shanling 49.5MW)
33 GoldWind 750KW 47.3 GuoHua (Chicheng) Wind Power Co.,
Ltd. 2009
27 GuoHua (TongLiao) Wind farm Ⅲ Project 33 DEC
1500KV 70 GuoHua (Tongliao) Wind Power Co., Ltd. 2009
28 HuaNeng Inner Mongolian Maoming Wind farm Project 3 DEC
2.5MW 80
DEC Group, Dongfang wind turbine Co., Ltd. 2009
Qingdao Wuxiao Group Co., limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel:86-532-81120580; Fax:86-532-82275396 ; M.P.:+86-13792494926
第 80 页 http://www.wuxiao.cn E-mail:[email protected]
29
Inner Mongolian De xian HuiDe wind Power Corporation. Wind farm ⅡProject
33 东气 1500KV
61.5
Inner Mongolian De xian HuiDe wind Power Corporation 2009
30 Inner Mongolian JingNeng Wulan Yili geng 300MW Wind farm Concession Project
36 GoldWind 1500KW
65
Inner Mongolian JingNeng Wulan Yili geng Wind Power Co., Ltd. 2009
31 LongYuan ZhangBei Bai Miaotan 49.5MW Wind farm Project
19 GuoDian
United Power1500KW
70 LongYuan ZhangBei Wind Power Co., Ltd. 2010
32 2.0MW Wind turbine tower (two sets) 2 XJ Group
2.0MW 70 XJ Group Group Company r 2009
33 GuoHua Tsitsihar Wind Power Company Wind farm ⅡProject
33 Sinovel 1500KW 70 GuoHua Tsitsihar Wind Power Company 2009
34 Huaneng Siping XinFeng Wind farm rebuilt Project 20 DEC1500KW 68 Huaneng Jilin Power Co., Ltd. 2009
35 Guohua AES new Ba Erhu Wind farm ⅠProject 49.5MW 33 DEC1500KW 61.5 Guohua AES new Ba Erhu Wind
power Co., Ltd. AES 2009
36 2.5MWGoldWind Wind turbine towers Project 1 GoldWind2.5M
W 80 Beijing GoldWind Kechuang Wind Power Equipments Co., Ltd. 2009
37 ShenNeng YIhe Tala Wind farm Project 16
ShangHai Electric2MWDEC1.5MW
70
Gezhou Dam Inner Mongolian Wind Power Equipment Co., Ltd. 2009
38 GuoHua Zhongdian Rongcheng Wind Power Co., 33 GoldWind1500
KW 70 GuoHua Zhongdian Rongcheng Wind Power Co., Ltd. 2010
Qingdao Wuxiao Group Co., limited Enterprise Introduction
Qingdao Wuxiao Group Co., Limited Tel:86-532-81120580; Fax:86-532-82275396 ; M.P.:+86-13792494926
第 81 页 http://www.wuxiao.cn E-mail:[email protected]
Ltd. Wind turbine towers Project
39 lingQiu HanFeng LING Wind farm 49.5MW Project 22 GE 1500KW 65 Lingqiu JIantou HengGuan Wind Power
Co., Ltd. 2010
40 CaoDian gou Wind farm 49.5 MW Project 33 GE 1500KW 65 ZhangBei HuaShi JianTou Wind Power
Co., Ltd. 2010
41 Wei Xian Dong Dianzi Wind farm ⅠProject 49.5MW 33 GE 1500KW 65 HeBei Jiantou WeiZhou Wind Power Co.,
Ltd. 2010
Qingdao Wuxiao Group Co., Ltd Prequalification Document
82
八、风场照片 WIND FARM
风场
Qingdao Wuxiao Group Co., Ltd Prequalification Document
83
九、发货 Delivery
1 国内发货照片 Delivery in china market
2 国外发货照片 Delvier for foreign customer
Qingdao Wuxiao Group Co., Ltd Prequalification Document
84
Qingdao Wuxiao Group Co., Ltd Prequalification Document
85
Qingdao Wuxiao Group Co., Ltd Prequalification Document
86
Qingdao Wuxiao Group Co., Ltd Prequalification Document
87
Qingdao Wuxiao Group Co., Ltd Prequalification Document
88
Qingdao Wuxiao Group Co., Ltd Prequalification Document
89
Qingdao Wuxiao Group Co., Ltd Prequalification Document
90
十 联系我们 Contact us
关注武晓,共创未来
闫雪(销售代表)
青岛武晓集团有限公司有限公司
电话: +86-532-81120580;传真:+86-532-82275396 手机: +86-15253265079
网站: www.wuxiao.cn
Email: [email protected] ; [email protected]
MSN: [email protected];Skype: wxsteeltower;
Shirley (Sales Representative)
Qingdao Wuxiao Group Co., Ltd
Add: East Lanzhou Road 553, Jiaozhou County, Qingdao City, P.R.C
Tel: 0086-532-81120580, 87276666; Fax: 0086-532-82275396
M.P.: 0086-15253265079; Website: www.wuxiao.cn
E-mail: [email protected]