Wilson Energy Employs QEI MicroPAQ to Monitor & Control ......2019/05/21 · module to obtain the...
Transcript of Wilson Energy Employs QEI MicroPAQ to Monitor & Control ......2019/05/21 · module to obtain the...
Wilson Energy Employs QEI MicroPAQ to Monitor & Control Peaking Generators for Load Management and Peak Shaving
Wilson Energy installed generators for use in their Peak Shaving program. Peak Shaving is initiated via their QEI SCADA system. Wilson employed the QEI MicroPAQ to communicate with their generators to monitor and control from SCADA.
Wilson Energy employs a number of Caterpillar, Cummins and Volvo Generators. Wilson needed a communication module to obtain the data from the EZGen generator controller, obtain the status of the generator circuit breaker, a control to start/stop the generator (from SCADA), to monitor the battery voltage, Wilson. There are 2-4 additional status points and 2-3 additional analog points that need to be monitored at some locations. The data from the gen-erator controller, the breaker closure, the battery data, and the start/stop control is communicated to the Wilson QEI SCADA System using the MicroPAQ communication module.
Wilson has experienced success with the MicroPAQ due its simplicity to implement and its ease to configure.
MicroPAQ App — Generator Monitoring & Control
This literature is for illustration purposes only, and is not part of any
contract. As we have a policy of continuous product improvement, any
features may be modified without notice. All trademarks and names
mentioned in this document remain the exclusive property of their holder.
QEI 45 Fadem Road Springfield, NJ 07081 USA T: +973-379-7400 F: +973-379-2138 E: sales@qeiinccom W: www.qeiinc.com
Behind front panel
MicroPAQ
Generator
Wilson Energy is one of North Carolina’s most progressive utilities providing affordable and dependable power to more than 37,000 customers
Communication Cabinet
Transformer Communication Cabinet Generator
MicroPAQ App — Generator Monitoring & Control
This literature is for illustration purposes only, and is not part of any
contract. As we have a policy of continuous product improvement, any
features may be modified without notice. All trademarks and names
mentioned in this document remain the exclusive property of their holder.
QEI 45 Fadem Road Springfield, NJ 07081 USA T: +973-379-7400 F: +973-379-2138 E: sales@qeiinccom W: www.qeiinc.com
MicroPAQ App — Generator Monitoring & Control
This literature is for illustration purposes only, and is not part of any
contract. As we have a policy of continuous product improvement, any
features may be modified without notice. All trademarks and names
mentioned in this document remain the exclusive property of their holder.
QEI 45 Fadem Road Springfield, NJ 07081 USA T: +973-379-7400 F: +973-379-2138 E: sales@qeiinccom W: www.qeiinc.com