Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 >(626) 968-6681 > Fax (626) 855-4862

HW-4030BIS

Whitehall

Swivette with

Bedpan Washer Cabinet

and Built-in Seat

Includes Models

4030-BIS, 4032-BIS, 4035-BIS

Last Update: 03/07/08

Fixture may show some available options.

Please visit

for most current specifications.

www.whitehallmfg.com 4030-BIS-L-1

Cabinet

Counter

Suffix -BIS, Built-In Seat,

Lavatory

Lavatory Valve

Toilet

Hydraulic Flush Valve

Swivel Assembly

Bedpan Washer Cabinet

GUIDE SPECIFICATION

exterior surfaces are high pressure laminate.Interior surfaces are stain-resistant melaminelaminate and stainless steel. Interior has a removablestainless steel floor to conceal frame anchors. Specifycabinet color selection.

has a 3" backsplash and horizontal, bullnosefront edge. Surface is high pressure laminate. Specifycounter color selection.

is an integral part of thecounter top.

is heavy gage, stainless steel, self-rimmed,furnished with P-trap and wall flange. Lavatory isalways located on the opposite side of the toilet.

is a deck-mounted, hot and coldmixing valve with wrist blade handles and a 10" rigidgooseneck.

is stainless steel, siphon jet type with whiteplastic seat and self-sustaining check hinge. Doorlinkage swivels the toilet into the room when cabinetdoor is opened. The toilet is locked in place whenopen and must be unlatched to close. Toilet operateswith a 1.6 GPF flush valve.

is furnished with a 1-3/4"diameter, hydraulically actuated, remote pushbutton.Flush valve requires a minimum of 25 PSI flowpressure.

is cast iron with a sanitary whiteEnviro-Glaze finish, and has a positive watertight,chemical-resistant seal. Swivel assembly requiresfloor anchoring and will withstand a 2,500 poundstatic vertical load.

mounts on the side of thecabinet and includes a hand-held bedpan washer withpositive shut-off and stainless steel hose. An elevatedpressure type vacuum breaker by others isrecommended with this feature to prevent back-siphonage or backflow occurring and possiblycontaminating the water supply. Consult local codesand ordinances for requirements.

Provide and install an Whitehall Swivette (specifymodel number and options). Cabinet frame shall beheliarc welded, type 304 stainless steel, and shall notrequire wall support. Cabinet doors and panels shallbe high pressure laminate. Door on toilet side shall belinked to toilet, so that when door is opened orclosed, the toilet will swivel accordingly. Door onlavatory side shall be provided with a toilet paperholder. Doors shall support a 250 pound static,vertical load. Front panels shall hinge open for accessto valves and piping. Cabinet shall provide front toespace. Counter shall be high pressure laminate with a3" backsplash, horizontal bullnose front and built-inseat. Lavatory bowl shall be heavy gage, stainlesssteel, self-rimmed, rectangular type, 9-1/2" x14-1/2" x 6" deep. P-trap shall be furnished. Toiletshall be stainless steel, elongated, siphon jet type,and shall flush in any position along the arc ofmovement. Trap shall pass a 2-1/8" ball. Toilet shallwithstand loadings of 2,500 pounds withoutpermanent damage. Toilet seat shall have self-sustaining check hinge. Toilet to flush with a 1.6 GPFflush valve. Bedpan washer cabinet shall include ahand-held bedpan washer with positive shut-off andstainless steel hose.

Whitehall Mfg. > P.O. Box 3527 > City of Industry, CA 91744 > (800) 782-7706 >(626) 968-6681 > Fax (626) 855-4862

HW-4030BIS

Model Number & Options______________________________________________Quantity___________

Company_________________________________________________________Date_______________

Contact_____________________________________Title_____________________________________

Approval for Manufacturing/Signature_____________________________________________________

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options______________________________________________Quantity___________

Company_________________________________________________________Date_______________

Contact_____________________________________Title_____________________________________

Approval for Manufacturing/Signature_____________________________________________________

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

MODEL NUMBER AND OPTION SELECTIONS

BASE MODEL NUMBER (Must Specify)

TOILET ORIENTATION (Must Specify)

Notes:

BACKSPLASH/CABINET ORIENTATION

(Must Specify)

COLOR SELECTION (Must Specify)

4030-BIS Free-Standing, Back Wall Waste Outlet

4032-BIS Free-Standing, Side Wall Waste Outlet

4035-BIS Free-Standing, Floor Waste Outlet

Note: Side wall outlet is only available on the toilet side

of fixture.

-L Left Hand Toilet

-R Right Hand Toilet

L (left) or R (right) indicates toilet location in

opened position when facing the fixture. Lavatory is

always located on side opposite the toilet.

-1 Back Wall Only (One Wall)

-2 Right Hand Corner (Two Wall)

-3 Left Hand Corner (Two Wall)

-4 Alcove (Three Wall)

Countertop ___________________________

Cabinet ______________________________

�

�

�

�

�

�

�

�

�

-AE Aerator (on Gooseneck Spout)

-BAT Battery Operated (-SO)

-BL Bedpan Lugs

-BWD Bedpan Washer Drain

-CSP Cushioned Seat Pad

-EC Extended Countertop. Specify Length _______

-EG Enviro-Glaze __ Lavatory __ Toilet.

Specify: ________

-EP Exposed Paper Holder

-LFN Laminar Flow Nozzle

-LS Lavatory Hose Spray

-MT Metal Template

-SO Sensor Operated Valve

-SUG Swing Up Grab Bar

-VF Concealed H & C Foot Pedal Operated

Air-Control Valve

Product Options

�

�

�

�

�

�

�

�

�

�

�

�

�

�

Please visit for most current specifications.www.whitehallmfg.com

Last Update: 03/07/08

All dimensions are nominal and subjectto manufacturer's change without notice.Whitehall assumes no responsibility foruse of void or suspended data.© 2006 Whitehall Manufacturing,a division of Acorn Engineering Company.Please visitfor most current specifications.

www.whitehallmfg.com