Whipple Mini-Mover Conveyor Product Catalog
-
Upload
mini-mover-conveyors -
Category
Documents
-
view
234 -
download
5
description
Transcript of Whipple Mini-Mover Conveyor Product Catalog
WHIPPLEMINI-MOVER CONVEYORS
Made in the USA. Manufacturing since 1949. Whipple Enterprises. Mini-Mover Conveyors Division
Since 1949. Proudly made in the USA. WHIPPLEMINI-MOVER CONVEYORS
For fast, courteous service -- for requesting a quote, placing an order, obtaining product specifications or gaining application assistance before and after the purchase:
Phone 800-586-4585 Fax 209-296-5124Web www.mini-mover.com
Modern, automatedmanufacturing &assembly facility
Precision componentsthrough state-of-the-artmachining & finishing processes
Expert assistance from applications
engineering
Quality assured with documented cycle audits & 100% finished productinspection
Rapid delivery & cost control through volume
build-outs & efficient assembly procedures
21150 Shake Ridge Road, Volcano, CA 95689 USA
Mini-Mover Conveyors DivisionWhipple Enterprises
Whipple Enterprises began operation in 1949 manufacturing precision parts and assemblies for the medical, electronics and aerospace industries. In the process of automating its parts handling from high-volume machining equipment, the company sought -- but could not find -- cost-effective, compact conveyors in the marketplace that could meet the company's needs.
Whipple had sought an in-house conveyor solution that offered rapid installation, limited maintenance and one that would withstand the rigors of the production machine shop environment. After finding limited product offerings on the conveyor market at that time, Whipple's engineering staff then developed its own low-profile conveyor design, incorporating these stringent requirements.
Initially, Whipple's modular mini conveyors were used only internally, to automate and increase productivity on variousmanufacturing functions. But soon, seeing the widespread demand for such comprehensive solutions on the marketplace, Whipple Enterprises released its Mini-Mover Conveyors publicly with immediate success. Through continuing market input and customer demand, the Mini-Mover Conveyor product offerings continue to expand rapidly.
Today, Mini-Mover Conveyors are utilized across many industry sectors including packaging, assembly automation, metal stamping, product labeling and food processing. Mini-Mover products are manufactured at our facilities in Northern California. A complete stock of components is maintained to allow orders to be built and shipped quickly, anywhere in the US, Canada and Mexico.
All Mini-Mover conveyors are built to the highest quality standards and are fully warranteed. We believe in developing long-term business relationships that build trust, confidence, and the assurance that you will get the right product and services for your application.
© Whipple Enterprises 2005-2012. All rights reserved
®
CONTENTS
Conveyors: Lite Series Modules
Platform HighlightsProduct Dimensions
23
PAGE
Conveyor Model Selection Guide
6 7 8 910
Conveyor Ordering Guide Module Selection Belting Selection Drive Selection
Drive Package Options
Drive Options & AccessoriesProduct Positioning FixturesConveyor Mounts Conveyor Stands
111213 13
Conveyor Accessories
Lite Series
EconomicalMachine-Shop Tough
Ingregral Side Guides
Very Low ProfileModular Design
Ideal for Limited Space
Conveyors: LP Series Modules
Platform HighlightsProduct Dimensions
45
Low Profile (LP) Series
Unattended OperationOvernight Accumulaton
Surge-Table Function
Accumulators: RTA Series
17171717
24-Inch Table - RTA-0132-Inch Table - RTA 0248-Inch Table - RTA-03RTA-Specific Options
Rotary Table Accumulator (RTA)
Conveyor Model Selection Guide
6 7 8 910
Conveyor Ordering Guide Module Selection Belting Selection Drive Selection
Drive Package Options
Drive Options & AccessoriesProduct Positioning FixturesConveyor Mounts Conveyor Stands
13141516
Conveyor Accessories
© 2005-12 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
Lite Series2 Features & Capabilities
Conveyor Belting Selection *
Lite Series conveyors have a wide variety of flat and cleated belting optionsavailable. Unless otherwise specified, Lite conveyors ship with flat U1-Style all-purpose white belting as shown above. U1-style belting performs well for most applications. This catalog also lists our most popular flat and cleated alternatives to U1 material.
To verify the optimal belting solution for the end application, please consult with your representative. We have many additional belting and cleat options not included in this catalog.
Integrated Drive (the original Lite)
Standardright-side mount shown
Lite Series Highlights
Rugged Construction. Its tough frame stands up to dirty grease, grime and hard production use.
Intregral Side Guides. Save money on extra hardware with the Lite’s built-in product guidance capability.
Ready to Run. Our original Integrated Drive Lite includes an integral drive package -- no tools or installation needed.A great solution for non-technical users and for experienced users looking for fast unit setup right out of the box. Just plug in and start running.
Lite Frame: 2.50 inch high, hard-black-anodized aluminum Side Guides: 0.70 inch high integral side guidesSlider Bed: 0.375 inch polished aluminum Pulleys: 1.25 inch dia., precision crowned aluminum Pulley Bearings: Ball bearing, doubled-sealed for lifeLoad Capacity: 150 lbs maximum (capacity is affected by drive speed; see Gearmotor Selection, Section H on pg. 9 for details.)
* See Belting Selection guide on pg. 8.
© 2005-12 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
* See Drive Package selection guides on pp. 9-12.
Undermount Drive
Overmount Drive
Overmount and Undermount (O/UM) Drives. Now addedto the catalog by popular demand, we offer a complete array ofover- and undermount drive package options for the Lite Series.User installation of the drive package is required.
Integrated Drive Lite Packages (standard): Consists of gearmotor, controls and right-side mount. Left-side mount, is available on request. Ready to run right out of the shipping carton.
O/UM ( Over/Under Mount) Drive Packages (optional): Consists of gearmotor, controls and hardware.Various over- mount and undermount (O/UM) drive packages are available for the Lite Series.
Drive Package Selection *
Motor Electrical & Control Options: The standard Lite drive package is 115/60/1 VAC with fixed-speed controls. Motors may also be supplied in other combinations such as 220/230 VAC, 3-phase, pneumatic and/or brushless DC, according to the user’s on-site equipment and electrical requirements. Variable-speed controls are also available.
Z-StyleOvermount
shown
Y-StyleUndermount shown
ipple Enterpr ises Reserve
Undermount Drive
erser installlation
Y-StyleUndermount shown
Lite Series 3Features & Capabilities
Model No.Length Reference
012018024030036042048060072084096108120132144
ActualConveyor Length (L)
12.00' '18.68' '24.50' '30.52' '36.52' '42.50' '48.76' '60.75' '72.99' '85.23' '97.47' '
109.47' '121.50' '133.50' '145.50' '
PulleyCenters (C) *
10.62' '16.15' '21.92' '27.79' '33.98' '39.80' '46.04' '57.85' '69.91' '82.00' '94.06' '
106.12' '118.18' '130.24' '142.30' '
Lite Series - Standard Lengths
Model No.Width Reference
020304060810121416
Conveyor Width (W)
1.90' '2.90' '3.90' '5.90' '7.90' '9.90' '
11.90' '13.90' '15.90' '
Standard Widths Integrated Drive Dimensions by HP
HP
1/301/18 1/8
0.20' '0.39' '0.39' '
A B
4.97' '6.00' '8.18' '
C
5.19' '5.57' '5.57' '
D
3.57' '3.88' '3.88' '
D
3.50"
0.70" Top of Belt to Top of Frame X & Y 0.30" Ctrs.Tapped 10-32 typ x4
X & Y 0.30" Ctrs.Tapped 10-32 typ x4
0.50"
2.50"
Mounting Hole Centerline
L
C
W + 1.10"A
W + 0.80"
B
C
WW + 0.50"
Lite Series Dimensions
© 2005-12 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
Integrated Drive Style shown here
*
* Undermount and Overmount Drive Styles
Dimension drawings of the optional Overmount and Undermount drive package options are shown on pp. 10 -12.
* Approximate; measurements can vary depending on belting used on unit
Lite Series integrated and O/UM drive packages may be mounted on either Right or Left siderail, as shown in the drawings below. The standard factory configuration is Right mounted, with belt traveling toward the gearmotor. Many other configurations are possible; ask your sales representative.
Right Side(standard)
Left Side(optional)
Drive Side
LP Series4 Features & Capabilities
LP Series Highlights LP Frame: 1.50 inch high, hard-clear-anodized aluminum Slider Bed: 0.375 inch polished aluminum Pulleys: 1.25 inch dia., precision crowned aluminum Pulley Bearings: Ball bearing, doubled-sealed for lifeAccessory Mount: T-Slot Profile, aluminum (optional)Load Capacity: 150 lbs maximum (capacity is inversely affected by drive speed. See the drive package selection guide on pg. 9 to determine capacity at specific belt speeds)
Ultra-Low Profile. At 1.5” high, the LP easily integratesinto existing equipment or new work cell designs.
Light and Modular. Portability and ease of adding sectionallengths make the LP a versatile investment.
Easily Accessorized. Numerous off-shelf accessoriestransform the LP into a flexible solution for specialized uses.Customization becomes cost-effective and fast.
© 2005-12 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
** See Belting Selection guide on pg. 8.
Conveyor Belting Selection **LP Series conveyors have a wide variety of flat and cleated belting options available. Unless otherwise specified, LP conveyors ship with flat U1-Style all-purpose white belting as shown above. U1-style belting performs well for most applications. This catalog also lists our most popular flat and cleated alternatives to U1.
To verify the optimal belting solution for the application, please consult with your salesrepresentative. We have many additional belting and cleat options not included in this catalog.
Drive Package Selection *Side Mount (S-Style)Consists of gearmotor, controls and hardware needed for Right- or Left-side mount.
O/UM Drive Packages (N- through Z-Styles) Consists of gearmotor, controls and hardware. Various overmount and undermount (O/UM) drive packages are available for the LP Series.
Remote Mount (R-Style)Consists of S-Style components, plus hardware need to mount gearmotor remotely from the conveyor module.
Motor Electrical & Control Options: The LP drive package ordered separately from its matching module; drive selectionand package options are listed on pp. 9-12. The standard motor is 115/60/1 VAC input with fixed-speed controls. Motors may also be supplied in other combinations such as 220/230 VAC, 3-phase, pneumatic and/or brushless DC, according to the user’s on-site equipment and electrical requirements. Variable-speed controls are also available. .
* See Drive Package selection guides on pp. 9-12.
LP Series 5Features & Capabilities
© 2005-13 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
LP Series Dimensions
Model No.Width Reference
020304060810121416
Conveyor Width (W)
1.90' '2.90' '3.90' '5.90' '7.90' '9.90' '
11.90' '13.90' '15.90' '
Standard Widths
C0.25"
0.25"
W
A
L
W + 1.00"
0.67"
W + 1.10"W + 0.50"W + 1.38"
1
0.30"
0.30"3
10-32 thdtyp X 2
1.50"
Mounting Hole Centerline
0.50"
()
2
LP Series: Standard Lengths
ConveyorLength Reference
012018024030036042048060072084096108120132144
NominalConveyor Length (L)
12.00' '17.50' '23.30' '29.33' '35.35' '41.00' '47.43' '59.06' '71.15' '83.30' '95.39' '
107.48' '119.57' '131.66' '143.66' '
PulleyCenters (C) *
10.62' '16.15' '21.92' '27.79' '33.98' '39.80' '46.04' '57.85' '69.91' '82.00' '94.06' '
106.12' '118.18' '130.24' '142.30' '
2.20' '2.69' '2.03' '2.69' '2.08' '2.13' '2.16' '2.35' '2.69' '2.68' '2.69' '2.69' '2.70' '2.73' '2.74' '
ReferenceDim. (A)
1. T-slot Profile OAL is specific to conveyor length. For length detail, order Specsheet 40204. T-Slot Profile may be removed. 2. When T-Slots are removed, additional mount holes are available. For hole location and size detail, order Specsheet 40202.3. Mounting Hole Centerline: Mounting hole quantity & locations are conveyor length specific. For detail, order Specsheet 40201.
Notes:
* Approximate; measurements can vary depending on belting used on unit
Rev A 1H-13
Lite & LP SeriesConveyor Ordering Guide6
* Factory Use Codes: Customer Modifications and Production Code
Optionally, Lite and LP Series conveyor platforms can be modified for specific application requirements. The special 4-digit fields (shown in gray color above) will be absent in the Model Number of a standard conveyor.
However, when modifications are made to the Module hardware, a 4-digit Customer Modifications code is added to the Model Number to keep a factory record of the hardware changes made, for future customer service purposes. When modifications are made to the Drive Package, a 4-digit Production Code will be assigned to keep a factory record of the electrical and/or hardware changes made, for future customer service purposes.
Every Mini-Mover conveyor, whether Lite Series and Low-Profile Series platform, is built to order. Each complete conveyor unit is comprised of three (3) hardware building blocks: conveyor module, belting and drive package. The Model Number system, illustrated below, assists both customer and factory to identify the exact hardware components and the application requirements to be met in the complete, assembled unit. Conveyor selection is a 1-2-3 configuration process in which the customer receives full sales engineering guidance every step of the way.
The module is the unit’s foundation, consisting of siderails, bedplate, pulley assemblies and drive shaft . Choose platform, dimensions and hardware preps that meet the intended drive package and application needs. (See pg. 7)
1 Conveyor Module
Model Number Key
2 BeltingSelection of the right belt material helps ensurethe final conveyor unit will perform the needed functions. Flat belting is available in many types tosuit varied situations. Once the fundamental flat belting is chosen, cleats may be selected in the style and configuration to best move product. (See pg. 8)
3 Drive PackageMany factors influence drive package selection, such as electrical supply, space requirements, size of the product to be moved and safety needsfor certain environments. We offer a wide variety of gearmotor combinations to meet almost any situation. (See pp. 9-12)
Examples of Model Numbers
Module & Belt 20-06036-R-N U1-H1/4
with Drive Package RI-180A-20-10
Lite Series, 06” wide by 36” long, drive shaft on Right side; T-Slots not available on Lite. Belt is flat U1-style white urethane, with H1 style cleats (0.79” high) spaced every 4”
Right-side Integrated (direct mount) drive, 180:1 gear ratio (3 fpm), 25 Watt motor for 115/50-60/1 VAC input, and equipped with standard fixed-speed controls
Lite
LP
LP Series, 12” wide by 144” long, drive shaft on left side, Dual T-Slots. Belt is optional flat P1-style black PVC.
Left-side undermount drive, set at 45°, 25:1 gear ratio (7 to 22 fpm), 40 Watt motor for 115/50-60/1 VAC input, and equipped with optional variable-speed controls.
Module & Belt 40-12144-L-D P1
with Drive Package LU-025B-20-11
© 2005-12 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
Customer Modifications
belt cleats are optional
see pg. 8
Conveyor Module Belting
Conveyor Platform
Width Length
see pg. 7
see pg. 7
see section below
T- Slots
DriveShaftSide
* Factory Use Only
MaterialType
Cleat Style
Cleat Spacing
1 2
Drive Package3
20 = Lite Series see pg. 2 40 = LP Series see pg. 4
see pg. 7
see pg. 8
see pg. 9
DriveSide
Input Voltage Wiring
Mount Style
see section below
see pg. 9 see pg. 9 see pg. 9see pg. 7 and pp. 9-12
Gear Ratio Motor
(Gearmotor) Production Code* Factory Use Only
Lite & LP Series Conveyor Configuration 7
Lite and LP Series conveyor platforms are readily modified for special applications. The modular nature of Mini-Mover conveyor design can cost-effectively adapt for requirements such as, but not limited to:
����������������������� ���� ��������� ��� ����������������������������������� ���� ���������������������� �� ��������� ����������������������!������� ��� �����
Customer ModificationsC
���������"��� �����#���� ������� �$����� ��$�����������%�� � ����������#���&����'� ��� �� ��#����#����$����������������� ���������������&����������������� ������(�)��'��$����������* ���� ����������� �����+��� ��$������+���
Conveyor Module OptionsB
Drive Shaft Location�����$����������������������#�� �� ���������$�+����/�
0��������������������#���� ��� ����mounting of any side-mounted, over-$�+�������+����$�+����1(�2)3����#�� �� ���1����/��4��5������� ���3/
Dual drive shaft location applies to the 0%�"���������0���"������(�2)�+���&�for gang-drive applications.
T-Slots&������� ��������+���������attached, are available only on the LP Series
Drive Shaft Location
L - Left Side R - Right Side D - Dual
Lite O/UM & LP Platforms
T-Slot Side Location
L - Left Side R - Right Side D - Dual �������6�"���
LP only
������6�"���
LP only LP only LP only Lite only
Model No.Width Reference
45474�4849�4�5���8
ActualConveyor Width (W)
�/;4� �5/;4� �7/;4� �</;4� �=/;4� �;/;4� �
��/;4� ��7/;4� ��</;4� �
Lite & LP Standard Widths
LP Series: Standard Lengths
ConveyorLength Reference
4�54�945�4744784�54�94844=549�4;8�49�54�75���
NominalConveyor Length (L)
�5/44� ��=/<4� �57/74� �5;/77� �7</7<� ���/44� ��=/�7� �<;/48� �=�/�<� �97/74� �;</7;� �
�4=/�9� ���;/<=� ��7�/88� ���7/88� �
PulleyCenters (C)
�4/85� ��8/�<� �5�/;5� �5=/=;� �77/;9� �7;/94� ��8/4�� �<=/9<� �8;/;�� �95/44� �;�/48� �
�48/�5� ���9/�9� ��74/5�� ���5/74� �
5/54� �5/8;� �5/47� �5/8;� �5/49� �5/�7� �5/�8� �5/7<� �5/8;� �5/89� �5/8;� �5/8;� �5/=4� �5/=7� �5/=�� �
ReferenceDim. (A)
Module Dimension ChartsA
Model No.Length Reference
4�54�945�4744784�54�94844=549�4;8�49�54�75���
Conveyor Length (L)
PulleyCenters (C)
�4/85� ��8/�<� �5�/;5� �5=/=;� �77/;9� �7;/94� ��8/4�� �<=/9<� �8;/;�� �95/44� �;�/48� �
�48/�5� ���9/�9� ��74/5�� ���5/74� �
Lite Series: Standard Lengths
�5/44� ��9/89� �5�/<4� �74/<5� �78/<5� ��5/<4� ��9/=8� �84/=<� �=5/;;� �9</57� �;=/�=� �
�4;/�=� ��5�/<4� ��77/<4� ���</<4� �
>������ �������� ������������������ �� # �� ����+�����?+��/��>���'�+��� ���representative for information.
%�� �������+��'�+��� ����������� �#������������ ��� �������� ������ �����#����� ���� ������������ ����#���/
� � � �@�544<��7�� �!���������� �����A����#������A���� ��B� ����C�$�������� ���"��� � �� �����!���+�%� ��� ��� ���
Conveyor Module
Conveyor Series
Width Length T- Slots
DriveShaft
1
belt cleats are optional
Belting
MaterialType
Cleat Style
Cleat Spacing
2
20 - Lite, pp. 2-3 40 - LP, pp. 4-4
A A B C see pg. 82
A. Standard width and length of your Lite or LP unit can be chosen from the charts in Section A below. For non-standard sizes,contact your sales representaive.
B. Drive shaft location determines whichside of the module your drive packaged will be installed on. Dual drive shafts are available on LP series and Lite over- or under-mount (O/UM) units. Section B below illustrates the available configurations.
C. Modifications are fairly common sinceMini-Movers can handle so many types ofapplications; see Section C below for more information.
Select the Conveyor Module1
Customer Modifications(Factory Use Only)
* Approximate; measurements can vary depending on belting used on unit
Rev A 1H-13
Conveyor Belting8 Lite & LP Series
A p p l i c a t i o n S u g g e s t i o n s
The following table shows the most commonly used and cost-effective belting we offer. These selections are comparably priced and suitable for most applications. However, we offer many specialty materials, for uses such as very high temperatures, wipedown, severe chemical exposure and ESD-rated belting for electronics and other static-sensitive environments. Consult with your representative for any questions regarding the most suitable belt material for your application.
© 2005-13 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
C l e a t e d B e l t sCleats (also called carriers) can be added to flat belting in order to separate or support products, especially in incline & decline applications. Cleats are available on all U-style belts except the U3. Standard cleat styles and sizes are shown below, which are those most commonly used. Cleat heights other than those listed here are also available upon customer request. Please contact your sales representative for non-standard cleat configurations.
K-Cleat - 75° Angle
0.28"
75.00°
0.16"
(h)
H-Cleat - 90° Upright
0.28"
0.12"(h) K5
K6K7K8K9
K-Cleat Style
0.50’’1.00’’1.50’’2.00’’2.50’’
(h)In.
12 mm25 mm 38 mm51 mm64 mm
(h)mm
H0H1H2H3H4
H-Cleat Style
0.16’’0.79’’1.18’’1.58’’2.36’’
(h)In.
4 mm20 mm30 mm40 mm60 mm
(h)mm
Top Cover
Lateral Stability
Bottom Side
Edge Finish
Color
Thickness
Temp. Range ‡
Antistatic
Cut & Abrasion Resistance
Top Surface
Top Adhesion (Top Friction)
FDA Conformance
Flat Belt ing Materials by Model No. Designation
Urethane
2 p ly Po lyes te r
Fabr ic
Cut
Whi te
0 .06"
Yes
- 2 2 ° F - 1 7 6 ° F
Yes
Exce l len t
Med ium Gloss
Med-Adh(Med-Frc t )
U 1
Attributes
Urethane
2 p lyPo lyes te r
Ure thane
Sea led
Whi te
0 .06"
Yes
5°F-176°F
Yes
Good
Low Gloss
Non-Adh(Med-Frc t )
U 2
Fabr ic
2 p lyPo lyes te r
Fabr ic
Cut
Whi te
0 .04"
Yes
14°F-158°F
Yes
Fa i r
Fabr ic
Non-Adh (V-Low-Frc t )
U3
Urethane
2 p lyPo lyes te r
Fabr ic
Cut
Whi te
0 .06"
Yes
-22°F-176°F
Yes
Good
Sat in
Non-Adh (Low-Frc t )
U4
PVC
2 p lyPo lyes te r
Fabr ic
Cut
B lack
0 .08"
No
-32°F to 158°F
Yes
Good
Mat te
Non-Adh(Low-Frc t )
P1
PVC
2 p lyPo lyes te r
Fabr ic
Cut
Dk Grey
0 .16"
No
14°F to 140°F
No
Exce l len t
Waved Gr id
V-H igh-Adh (H igh-Frc t )
P3
‡ U1, U2 and U4 belts will withstand product temperatures of up to 212°F in applications where product contact is transitory. Temperature values given above are based on continuous or prolonged product contact that elevates or decreases belt material temperature. Contact your representative for assistance with high-heat applications.
PVC
2 p lyPo lyes te r
Fabr ic
Cut
Grey
0 .07"
No
23°F to 122°F
Yes
Good
Waf f led
High-Adh(Low-Frc t )
P2
PVC
2 p lyPo lyes te r
Fabr ic
Cut
Green
0.08"
No
14°F to 158°F
No
Good
Smooth
High-Adh (Med-Frc t )
P4
Material Handling
Accumulation: U3, U4, P1Diverting: P1, P2Distribution Center: P2, P3, P4Sorting: P2
All Purpose
Assembly Line: U1, U4 Machine Shop: U1, U2Metal Stamping: U1, u2 Packaging: U1Plastic Molding: U1, U4
Incline & Decline
High Grip: P2, P3 Impact Loads: P3 Medium Grip: U1
Special Usage
Ink Jet/Bar Code: P1 Low-Noise: P1 Severe Duty: U2
Food Preparation
Antimicrobial: U2Bakery Transport: U3FDA Conformance: U1 thru U4Food Transport: U1Taste-Neutral: U1, U2, U4
Select Belting and Cleat Material2
Rev A 1H-13
Lite & LP Series 9Conveyor Drive Selection
Select the Drive Package (Model Number Key)
ShaftSide
Mount Style
E E
Input Voltage Wiring
F Gsee pp. 10-12 for drive mount details
Gear Ratio Motor
(Gearmotor)
* refer to pg. 6 for code description
Production Code* Factory Use Only
© 2005-12 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
1. Using the Speed-to-Load chart, determine the ideal combination for your expected application
2. From the Gearmotor Determination chart, choose a fixed speed or variable speed gearmotor that best suits your requirement
3. Use the selected gearmotor reference number when building a conveyor ordering number.
Gearmotor Selection by Speed & HPE
20 115/60 1-phase VAC
21 230/50-60 1-phase VAC
23 230/60 3-phase VAC
25 12 VDC
26 24 VDC
27 48 VDC
28 90 VDC
29 130 VDC
30 Pneumatic
Select Input VoltageF
10 Fixed Speed Module
11 Variable Speed Module
12 Conduit Box
Includes a power switch, fuse, LED indicator and 7-ft power cord with plug. Only available in 115/60 VAC.
Includes run / stop, rotational direction, rotary speed switches, 7-ft power cable and 5-ft motor-to-controller cable
Includes only wires and capacitor; no controls included
Select Wiring OptionG
13 OEM Cable
99 Other (per quote or order description)
Belt Speed FPM *
1 - 33 - 8
4 - 115 -15
7 - 2210 - 31
12 - 377 - 22
10 - 3112 - 3717 - 4420 - 61
38 - 11070 - 194
12 - 3717 - 44
20 - 61 24 - 74
38 - 10053 - 15570 - 194
GearmotorReference No.
180 A075 A050 A036 A025 A018 A015 A025 B018 B015 B012 B009 B005 B003 B015 D012 D009 D007 D005 D004 D003 D
HP
1/301/301/301/301/301/301/301/181/181/181/181/181/181/18
1/81/81/81/81/81/81/8
Torque (In-lb)
696947342417143929242014
85
50423025171210
Belt Speed FPM *
38
12162332392332394765
117196
39476578
117163196
Fixed Speed Variable Speed
Gearmotor Determination by Torque & Speed
* FPM = feet per minute
Suggested Speed-to-Load Motor Combinations
Note: Load carrying capacity is based on horizontal travel. Load rating above is based upon total weight of product, distributed uniformly over the usable belt length and with the belt moving toward the drive (i.e., in the standard “Pull” gearmotor configuration.
For inclined applications, for applications with the belt travel away from the drive end (i.e., “Push” gearmotor configurations) , and for application assistance on drive packages not included in this catalog, please consult your sales representative.
1/30 HP - 25 Watt A
1/18 HP - 40 Watt B
1/8 HP - 90 Watt D
Conveyor Load (lbs)
13-23
24-39
40-65
66-98
99-155
9-12
Belt Speed(FPM) 10 11
0
0-5
20 30 40 50 60 70 80 90 100
120
130
140
150
156-200
0-8
3
Lite & LP Series10 Conveyor Drive Packages
S Style - LP Series
D
E
3.50"
1/30 HP1/18 HP
1/8 HP
3.52''3.84''3.97''
5.05''5.37''5.50''
4.97''6.00''8.18''
2.25''2.44''2.44''
0.15''0.23''0.23''
1.84''1.84''1.76''
A B C E F GD0.95''1.16''1.16''
C
B
A
F
G
Side-Mount Styles
I Style - Lite Series
B
A C
D
3.50"
Power Cord 7 ft
E
F
1/30 HP1/18 HP
1/8 HP
3.61''3.92''3.92''
1.07''1.38''1.38''
3.15''3.54''3.61''
0.20''0.39''0.39''
5.24''5.63''5.63''
A B C E FD4.97''6.00''8.18''
Standard Controls: Fixed-speed control box with power switch; 7-ft cord & plug; 115/60/1 VAC gearmotor Optional Controls: Variable-Speed Control or Conduit-Box only with lead wires, no controls (see pp. 12-13 for details)
45° Undermount StylesStandard Drive Controls: Fixed-speed control box with power switch; 7-ft cord & plug; 115/60/1 VAC gearmotor and drive pulley-belt coverOptional Controls: Variable-Speed Control or Conduit-Box only with lead wires, no controls (see pp. 12-13 for details)
45° Styles - Lite Series
1/30 HP1/18 HP
1/8 HP
1.48''1.60''n/a
7.15''7.34''n/a
4.97''6.00''n/a
7.33''7.47''n/a
1.00''1.00''n/a
A B C E FD2.00''1.92''n/a
E
3.50"
Power Cord, 7 ft
D
B
A
C
F
U Style (standard - 7.3" drop)
1/30 HP1/18 HP
1/8 HP
2.78''2.78''1.52''
8.37''8.60''7.38''
3.30''3.15''1.75''
8.68''8.85''7.50''
1.00''1.00''1.25''
A B C E FD4.97''6.00''8.17''
N Style (long - 9.1" drop)
45 ° Styles - LP Series
1/30 HP1/18 HP
1/8 HP
1.48''1.60''n/a
6.52''6.67''n/a
4.97''6.00''n/a
1.42''1.15''n/a
1.00''1.00''n/a
A B C E FD
6.60''6.68''n/a
A
F
C
E
D
B
3.50"
Power Cord, 7 ft
1/30 HP1/18 HP
1/8 HP
2.78''2.78''1.52''
7.76''8.00''6.67''
2.60''2.40''1.08''
7.98''8.40''6.85''
1.00''1.00''1.25''
A B C E FD4.97''6.00''8.17''
N Style (long - 9.1" drop)
U Style (standard - 7.3" drop)
© 2005-13 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice Rev A 1H-13
Lite & LP Series 11Conveyor Drive Packages
90° Undermount StylesStandard Controls: Fixed-speed control box with power switch; 7-ft cord & plug; 115/60/1 VAC gearmotor and drive pulley-belt coverOptional Controls: Variable-Speed Control or Conduit-Box only with lead wires, no controls (see pp. 12-13 for details)
© 2005-13 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
X Style - Lite Series
B
D
3.50"
Power Cord 7 ft
1.00"
C
A
H
1/30 HP 1/18 HP
2.40'' 2.50''
8.50'' 8.33''
4.97'' 6.00''
5.56'' 5.76''
A
B
C
D
0.73'' 0.73''H
X Style (standard - 6.25" drop)
B
D
3.50"
A
1.37"
C
X Style - LP Series
1/30 HP 1/18 HP
1.84'' 1.82''
6.78'' 6.90''
4.97'' 6.00''
5.50'' 5.76''
A
B
C
D
X Style (standard - 6.25" drop)
Power Cord 7 ft
Y Style - Lite Series
C
E
A
3.50"
Power Cord 7 ft
D
B
1/30 HP 1/18 HP 1/8 HP
4.00'' 4.08'' 4.05''
9.68'' 9.92'' 9.92''
A
B
CD
4.97'' 6.00'' 8.17''
5.53'' 5.72'' 6.10''
E 1.00'' 1.00'' 1.25''
Y Style (long - 7.75" drop)
Y Style (long - 7.75" drop)
Y Style - LP Series
1/30 HP 1/18 HP 1/8 HP
ABCDE
3.40'' 3.40'' 4.10''8.38'' 8.52'' 9.27''4.97'' 6.00'' 8.17''5.52'' 5.80'' 5.65''1.00'' 1.00'' 1.25''
C
E
A
3.50"
Power Cord 7 ft
B
D
1/8 HP motor offset 1/30 & 1/18 HP motor offsetD
3.50"
Power Cord 7 ft
B
Rev A 1H-13
Lite & LP Series12 Conveyor Drive Packages
90° Overmount StylesStandard Drive Controls: Fixed-speed control box with power switch; 7-ft cord & plug; 115/60/1 VAC gearmotor and drive pulley-belt coverOptional Controls: Variable-Speed Control or Conduit-Box only with lead wires, no controls (see pp. 12-13 for details)
Z Style - LP Series
1/30 HP1/18 HP
1/8 HP
4.22''4.15''4.15''
10.97''11.28''11.41''
4.97''6.00''8.44''
A B C
B
1.00"
A
C 3.08''1.59"
Z Style - Lite Series
1/30 HP1/18 HP
1/8 HP
4.22''4.15''4.15''
4.97''6.00''8.44''
11.34''11.65''11.65''
A B C D1.00''1.00''1.25''
C
B
D
A
3.08"1.50"
1/30 HP1/18 HP
1/8 HP
0.98''1.06''1.06''
1.98''2.06''2.06''
5.20''5.59''5.71''
6.20''6.59''6.71''
3.15''3.54''3.54''
H min H max B min GC
4.97''6.00''8.18''
B max
R Style - LP Series
2.50"C
H
0.84"G
Bracket Hole Pattern
3.54"
2.50"
1.00"
1.00"
3/8''Ø 4x typ
CL Drive Shaft
3.50''3.50"
3.54"
H
B
Remote-Mount Style Standard Drive Controls: Fixed-speed control box with power switch; 7-ft cord & plug; 115/60/1 VAC gearmotorOptional Controls: Variable-Speed Control or Conduit-Box only with lead wires, no controls (see right and pg. 13 for details)
For customers who plan add their own control equipment to a drive packagestyle, Lite and LP series conveyors can be shipped with a conduit box only, to allow on-premise wiring of conveyor controls.
Drawings and dimensions for drive packagesequipped with conduit box are available by requesting the relevant specsheet number:
The specsheets cover dimensioning forthese gearmotor types when equipped with conduit box: 115/60/1 VAC, 230/50-60/1 VAC and 230/60/3 VAC .
Conduit-Box-Only Option
Specialized gearmotor/conveyor module configurations, such as for ink-jet print or bar-coding operations, are also offered. Ask your sales representative for more information.
We can accommodate a variety of specialized drive-related application needs that are not detailed in this catalog. These include but are not limited to:
Non-Cataloged Options
© 2005-12 Whipple nterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior t ice
Lite & LP Series Drive Options & Accessories 13
Standard Controller Features�������������� ��� �������������� ��� ������ ������ ������������������������� ������������������������ ��������������� � �!"�#$%��������������
���������&��
# �'�
!"�("�)""*
�� ���
�����
+,)-�.
/,00.
-,"".
Variable-Speed Option
1���*�� �2����������� 3��� �� ���3� ��2������' ������'����� �����3������ 3�����4� ������ ������ �����+5������ ���� �����,�1����� 3�������3�� �2������������������������� ������ �������� � �������,��6� �������������������� �3������������������%�������&5����������,���1��� �3��������������� ��������//-�*7�� �������� �3������������)+"�!"�+�*7�,���
7����� 3���8���������������������������� �����3�� �2��5�����������8�����+5������ ���� ���������2����� ������������������ �������� �29����8������ � ����5� ��� � � �2���������,��� ���� ��������+5������������ ������ ������ �29������3� ��2���2������ � ����������:")"+
External Control CablePart No. 30-7217
Length: 16.5 ft (5 m)
Cabling for optional remote-control applications with customer’s PCI orequivalent switches. Includes pigtail and ground connector only. For use only with the above variable-speed drive control.
External Control Accessories
Product Indexing TimerPart No. 30-7012
Independent control of conveyor belt movement and stop; timing ranges from 0.10 sec. to 1 hr. Heavy-duty, long life relay output. LED power and relay on indicators. Aluminum enclosure with power switch, conveyor plug receptacle and 7 ft power cord.
�;�)""-5/+�� ��� �����<����� ���������3������� �� ����� ��� ���� ����������� � �� ���� ����� � �= ��
Couplers Style
HelicalHelicalHelicalLovejoyLovejoyHelicalHelical
Part No.
40-720140-720340-720440-724240-724340-724440-7245
Description
Light Duty, 0.500'' x 0.500'' ID, 1.125'' OD x 1.50'' LongMed. Duty, 0.500'' x 0.500'' ID, 1.250'' OD x 1.75'' LongMed. Duty, 0.500'' x 0.625'' ID, 1.250'' OD x 1.75'' LongHeavy Duty, 0.500'' x 0.500'' ID, 1.10'' OD x 1.75'' LongHeavy Duty, 0.500'' x 0.625'' ID, 1.10'' OD x 1.75'' LongLight Duty, 0.500'' x 0.375'' ID, 1.125'' OD x 1.50'' LongHeavy Duty, 0.500'' x 0.375'' ID, 1.25'' OD x 1.75'' Long
Drive ShaftPart No. 40-7211 Diameter: 0.50'' 303 stainless steelSold by the inch
Gang & Remote Drive Components
As equipped from the factory, the Variable Speed enclosure is free-standing, These brackets allowseveral mounting configurations.
Control Mount Accessories
30-7243
Vari-Speed EnclosureMount Bracket
30-7243 Leg Stand 30-7244 T-Slot (LP only)30-7245 Siderail (Lite or LP) ���
Part No. For mount on:
Optional External (Remote) Capability *>�������������� ���� �������� ������'������� 3������� ����8�����6�3�����������������������������������������?
���������������>����������3����������
* Requires factory installation of the 30-7217 cable (below) at time of unit manufacture �
Rev A 1H-13
Inverter/ControllerAssembly Part No. Drive Compatibility * 30-7221 25/40 Watt 100-120 VAC input) 30-7222 90 Watt (100-120 VAC input)
The Inverter/Controller Assembly is included with standard drive packages ordered from the factory equipped with the Variable-Speed option. The assembly includes inverter/controller, enclosure, cabling and power input cord, with electrical characterics to match the3-phase gearmotor of its companion drive.
* Additional Inverter/Controller Assemblies are also available for 200-230 VAC input drive packages. Consult your sales representative for more information.
@�� � �#���/"�+)���9)�1���
6�3������@����2���-���'�� �
/,!:.
),-". ),"". +,"".
+,"".
+,-".
���������&��
-,"".
Lite SeriesDimensions & Specifications14 Product Positioning Fixtures Lite & LP Series
Standard side guides are constructed of aluminum with a brush finish. They are also available with with laminated UHMW product guide surface. Guides may be installedwith or without the T-slot Profile and are sold per side by the conveyor length model. Order 2 each when both sides are required. [Example: for a 1.5'' high side guide withUHMW guide surface, on both sides of a 042 reference-length conveyor = order 2 each, 40-7262-042] For other heights, consult your sales representative.
Adjustable rail brackets utilize the Conveyor T-slot Profile for mounting and are available in three styles with each style offering multiple adjustment ranges. The 1/8'' and 1/4'' brackets are constructed using two aluminum L brackets. The Quick Adjust bracket is constructed of aluminum brackets and stainless steel adjustment rods and are available with optional quick-adjust t-handles. Guide rails are constructed of UHMW with a stainless steel mounting support and are available in four widths. Brackets are sold individually and rails are sold by the foot.
Adjustable Guide Rails (LP Series)
Fixed Side Guides (LP Series)
Part stops are available in two styles. The Lite Series stop mounts to 10/32 thd holes at the conveyor idler or drive ends. The LP Series stop mounts to the T-slot profile and the stop may be located at any point along the belt length. Stops are constructed of 1/2'' thk x 2.00'' height PVC and utilize aluminum brackets for mounting.
Lite Series Stop LP Series Stop
Accumulation Part Stop
Conveyor Width Ref. Lite Series Part No.
020304060810121416
LP Series Part No.
20-703420-703520-703620-703720-703820-703920-704020-704220-7044
40-705040-705140-705240-705340-705440-705540-705640-705840-7060
Aluminum Guide
Part No. 40-7221 - 1.00'' high40-7222 - 1.50'' high40-7223 - 2.00'' high40-7225 - 2.50'' high40-7226 - 3.00'' high40-7227 - 4.00'' high
Aluminum Guide with UHMW Surface
Part No. 40-7261 - 1.00'' high40-7262 - 1.50'' high40-7263 - 2.00'' high40-7264 - 2.50'' high40-7265 - 3.00'' high40-7266 - 4.00'' high
Discharge ramps are constructed with PVC tops and include all mounting hardware.They are available in two styles. The Lite Series ramp mounts on the siderail frame on both sides regardless of installed drive package style. The LP Series ramp, which mounts according to the installed drive package style, includes an adjustable arm and adaptive hardware to accommodate proper positioning.
Product Discharge Ramps
Conveyor Width Ref. Lite Series Part No.
020304060810121416
LP Series Part No.
20-700720-701320-700820-700920-701020-701120-701220-701420-7016
40-700740-700840-700940-701040-701140-701240-701340-701540-7017
Lite Series Ramp LP Series Ramp
Note: Adjustment values shown are measured from centerline of mounted rail to conveyor belt surface for height, and from mounted rail face to inside edge of conveyor side frame for width. Abbreviations: LH= low height, HH = high height, IF = inside the frame & OF = Outside the frame
1/8'' Brackets 1/4'' Brackets Quick Adjust Brackets
BracketsBracket Style 1/8'' Aluminum1/8'' Aluminum1/4'' Aluminum
1/4'' Aluminum 1/4'' Aluminum
Quick AdjustQuick AdjustQuick AdjustQuick Adjust
Part No.40-720540-720640-721240-721340-721440-725140-725240-725340-7254
LH 0.75''0.75''0.50''0.75''0.75''0.50''0.50''0.50''0.50''
HH 4.25''5.25''0.75''3.25''5.25''2.75''4.75''6.75''8.75''
IF 3.50''4.50''1.00''2.00''2.00''2.25'' 4.25'' 6.25''8.25''
OF3.00''3.75''0.75''0.37''0.37''0.75''0.75''0.75''0.75''
* Guide rails are constructed of formed stainless-steel alloy support sheaths with flat, solid UHMW polymer inserts, supplied in the ordered width and cut to the ordered length
Dual Rail BracketBracket assembly mounts two guide rails with 2.50'' rail gap between rails;Quick Adjust T-Handle is optional
Guide Rails *Rail Width
0.50''1.00''1.25''2.25''
Part No.
40-723140-723240-723340-7235
Item
Dual Bracket (A) T-Handle option (B)
Part No.
40-723740-7238
© 2005-13 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
A
B
Rev A 1H-13
Conveyor Mounts & Stands 15Lite & LP Series
© 2005-13 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
Note: Adjustment values stated are measured from the mounting surface to the conveyor belt surface. Abbreviations: LH = low height HH = high height FH - fixed height
Mounting Brackets
Lite Series Frame Mount
L Bracket, 0.125'' alum. Mounts to existing 1/4-20 hole pattern. Conveyor installation hardware included.
Size2'' x 2'' 2'' x 3'' 2'' x 4'' 2'' x 5''
Part No.20-703020-703120-703220-7033
LH 1.82''2.44''3.57''4.57''
HH 3.00''4.00''5.00''6.00''
LP Series Frame Mount
L Bracket, 0.125'' alum. Mounts to existing 10-32 holes. Conveyor installation hardware included.
Size
0.625'' x 1.50'' 2.00'' x 1.50''
Part No.
40-703440-7035
LH
--2.37''
HH
--2.87''
FH
1.50''--
LP Series T-Slot Mount
L Bracket, 0.125'' aluminum. Mounts to theT-Slot Profile. Conveyor installation hardware included.
Size2'' x 3'' 2'' x 4'' 3'' x 5''
Part No.40-703140-703240-7033
LH 1.63''2.62''3.62''
HH 3.12''4.12''5.12''
This mounting system allows either Lite Series or LP Series conveyor to be mounted on a vertical surface. Mount brackets located on the crossbar attach to existing holes on the conveyor siderail frame. A mounting arm located on the support plate rotates for for incline applications. Installation hardware included.
T-Nuts aid in attaching or adjusting accessories. For LP Series conveyors equipped with T-Slot side profiles, the 40-series T-Nutsare used. For Mini-Mover leg stands, the 30-series allow heightadjustments. Additional T-Nut styles, not listed below, are also available.
T-NutsVertical-Surface Mount
Width
02 - 1214 - 16
Part No.
30-708130-7082
For Lite and LP Series conveyors, this 1/16'' thk PVC extrusion snaps over siderail or side guide frame to prevent damage to sensitive parts. Cut to the ordered length and height for a custom fit. Sold by the stick.
Product Guide Cushion
Platform
Lite SeriesLP Series
Part No.
20-307040-3070
Thd
10-321/4-2010-321/4-205/16-18
Part No.
40-704140-704230-302030-302130-3022
Use
LP SeriesLP SeriesLeg StandLeg StandLeg Stand
40-7042 shown 30-3020 shown
Leg StandLeg stands are designed to fit all Mini-Mover conveyors of up to 16” width. They are constructed of heavy-duty aluminum material, with a 22'' base width and include leveling feet. Standard adjustable heights are available from 13'' to 52'' in 6-inch increments. The standard Leg Stand comes with an upright mounting bracket for level conveyor usage. For incline/decline conveyor applications, the mounting bracket is angle-adjustable of up to 40 degrees. Options include Cross Braces for added stability and Caster Assembly for added portability.
Sold individually
Conveyor Stands
30-7051-A 30-7052-A 30-7053-A 30-7054-A 30-7055-A30-7056-A30-7057-A
Angled Part No.
30-7051 30-7052 30-7053 30-7054 30-705530-705630-7057
UprightPart No.
13'' to 16'' T.O.B.16'' to 22'' T.O.B.22'' to 28'' T.O.B.28'' to 34'' T.O.B.34'' to 40'' T.O.B.40'' to 46'' T.O.B.46'' to 52'' T.O.B.
Height Adjustment
For steeper angled incline/decline applications, additional options are also available. Consult your sales representative.
The Cross Brace option affords increased stability for applications using two legstands. This is recommended for conveyor lengths of 42'' or greater.
Sold individually
Cross Brace
30-706030-706130-706230-706330-706430-7065
Part No.12'' to 36'' 37'' to 60'' 61'' to 84'' 85'' to 108'' 109'' to 120'' 121'' to 130''
Length*
* These P/N denote general lengths. Ask your representative to verify the correct length.
Caster Assemblyfor Aluminum Stands
The locking caster assemblyadds 3.4'' to the leg stand’sadjustable height and adds 4.5'' to the base width. 360° swivel.
Part No. 30-7066
Sold in pairs
Leg Stand
Cross Brace
Rev A 1H-13
Dimensions & Specifications16 Conveyor Stands Lite & LP Series
© 2005-13 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
Turned Base StandAluminum construction, 28 '' base length. The base is turned parallel to conveyor to achieve a small footprint. Designed for light-duty applications. This type of standis not recommended for conveyor lengths of 48'' or longer. Adjustable heights are available from 13'' to 34.''Width of the stand’s base will vary, according to the widthof conveyor it is to support (see chart below.)
Single Base StandHeavy-duty aluminum construction. 22.5'' wide x 33'' long base with angled bracing and leveling feet. Fits conveyor widths to 16'' and is height adjustable from 28'' to 46.'' Conveyor mounting bracket is angle adjustable for incline / decline applications up to 40 degrees. Not recommended for conveyors over 72'' in length.
Steel Base Stand
Heavy-duty 20'' sq. steel base acts as counterweight. Features 36'' aluminum upright, mounting arm, and leveling feet. Fits conveyor widths up to 16'' and is height adjustable from 14'' to 37'' T.O.B. Incline angle adjustable to 40 degrees. Mounting arm may be located on any side of the upright column, butcertain locations may require additional counterweight. Optional casters available.
Conveyor Stands
Tabletop Foot Assembly
30-707330-707530-7076
Part No.
28'' to 34'' T.O.B.34'' to 40'' T.O.B.40'' to 46'' T.O.B.
Height Adjustment
The Single Base Stand may be equipped with theoptional Caster Assembly, P/N 30-7066. (Refer to listing on pg. 15 for more caster information.)
Caster Assemblyfor Steel Base Stand
The locking caster assemblyadds 3'' to the steel base stand’s adjustable height. 360° swivel.
Part No. 30-7078
Sold in sets of 4
Steel Base Stand with optional Caster Assembly and inclined LP Series conveyor
30-7072
Part No.
14'' to 37'' T.O.B.
Height Adjustment
Shown with optional Caster Assembly
6'' wideLite Conveyor
shown
(w)
30-7551-A 30-7552-A 30-7553-A 30-7554-A
Angled Part No.
30-7551 30-7552 30-7553 30-7554
UprightPart No.
13'' to 16'' T.O.B.16'' to 22'' T.O.B.22'' to 28'' T.O.B.28'' to 34'' T.O.B.
Height Adjustment
1'' - 8''10''12''
* Conveyor Width
15'' 14''16''
Stand Widthat Base (w)
* Turned Base Stand not recommended for conveyors wider than 12”
Rev A 1H-13
For free-standing Lite or LP Series conveyor setup on tabletop or other horizontal surface. Each foot mounts directly to the conveyor siderail. Non-marring foot inserts prevent table surface scuffing and act to keep unit firmly in place. All mount hardware included.
Part No.30-7071
Sold in pairsStandardInvertedStandardInverted
Mount
LiteLiteLPLP
Unit
2.66'' to 2.90'' T.O.B.1.87'' to 2.11'' T.O.B.2.75'' to 2.99'' T.O.B.1.97'' to 2.21'' T.O.B.
Height Adjustment
Inverted mount
Standard mount
Height adjustments can be made using both the foot screw and by installing the mounting bracket in the orientation that provides the desired TOB height and underframe clearance.
RTA Series 17Features & Capabilities
RTA-01Single-Column Upright
RTA-02 & RTA-03Telescoping-Column Upright
RTA Series HighlightsMini-Mover Rotary Table Accumulators (RTAs) were originally designed for the metalworking marketplace to promote unattended machine operation, separation of sensitive parts after machining and overnight “lights-out” operation.
RTAs are well suited for various applications in assembly and packaging, such as cycle tolerance inspection, surge table on production lines and staging for manual or pick &place case packaging.
Available options allow the RTA to be equipped with a Stainless Steel Overlay for handling abrasive product. It can also be converted from accumulation to transfer table (see Stationary Fence Option) for sortation or diverting operations.
RTA Specif ications by Model
Parameters
Table DiameterUnit Weight
Load Capacity
Rotation Options (rpm):Fixed Speed
Variable Speed
Height Options:A B C
RTA-01
24' '95 lbs60 lbs
1, 2 or 31 - 3
16' ' - 34' ' — —
RTA-03
48 ' '145 lbs100 lbs
1 or 31 - 3
20' ' - 28' '28' ' - 36' '—
32' '120 lbs100 lbs
1, 2 or 31 - 3
20' ' - 28' '28' ' - 36' '36' ' - 48' '
RTA-02
RTA Frame: Extruded aluminum Tabletop: Polished PVC Table Height: Adjustable; see Specifications below Roller Base: 20'' square, steel, with heavy-duty locking casters Part Stop Cushion: Adjustable height and angleDiverter Arm: Adjustable height and angleRotating Fence: Polished PVC, 3/4'' high, non-adjustable perimeter
Rotary Table Options
Stainless-Steel OverlayFor handling of abrasiveparts or materials, the toughstainless-steel overlay can be equipped on the unit at the factory. This option is not available as a field retrofit.
Part No. Size
60-7011 24'' dia. RTA-01 60-7012 32'' dia. RTA-02 60-7013 48'' dia. RTA-03
Stationary-Fence OptionThis option allows the RTA unit to serve as a surge table or 90°transfer unit between conveyor cells. This capability reduces the need for attended operation in production lines that intermit-tently stop and start.
This option can be ordered with new RTA units. It is not available as a field retrofit.
Single-Rail system shown here
Style
Single-Rail systemDual-Rail system
24'' RTA-01
60-722460-7225
32'' RTA-02
60-723260-7233
48'' RTA-03
60-724860-7249
© 2005-12 Whipple Enterpr ises Reserves the Right to Change Dimensions and Speci f icat ions Without Pr ior Not ice
21150 Shake Ridge Road, Volcano, CA 95689Phone: 800-586-4585 Fax: 866-900-5124Web: www.mini-mover.com
Whipple Enterprises reserves the right to change or discontinue productsand specifications with or without notice. All products are covered in accordance with our standard warranty.
© Whipple Enterprises 2005-2013. All rights reserved
Mini-Mover Conveyors DivisionWhipple Enterprises
WHIPPLEMINI-MOVER CONVEYORS
Compact integral drive conveyors. Low profile modular conveyors. Rotary table accumulators.
Proudly made in the USA.
Rev A 1H-13