WHEN RELIABILITY MATTERS
Transcript of WHEN RELIABILITY MATTERS
REDI-PRIME PUMPSCORNELL PUMP COMPANY
Cornell Pump Company16261 SE 130th AveClackamas, OR 97015P: (503) 653-0330F: (503) 653-0338
Efficient by Design
CORNELLPUMP.COM©2011 CORNELL PUMP COMPANY
THE CORNELL PRODUCT LINE
Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;
6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
*To visit our REDI_PRIME webpage on your smartphone, scan the QR code below:
Cycloseal®, Hot Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
self-priming
refrigeration municipal food process industrial
submersible hydro-turbine agricultureTHE CORNELL PRODUCT LINE
MINE DEWATERINGCORNELL PUMP COMPANY
WHEN RELIABILITY MATTERS
SELF-PRIMING SUBMERSIBLE TURBINE AGRICULTURAL
REFRIGERATION
REDI-PRIME
MUNICIPAL
MINE DEWATERING
FOOD PROCESS
CORPORATE
INDUSTRIAL
IMMERSIBLE
WHEN RELIABILITY MATTERS
...is setting the standard for the construction pumping industry. Flow characteristics that were ‘good enough’ before are no longer acceptable. Cornell’s innovative engineering and forward thinking have made our pumps capable of producing up to 400 percent more fl ow than the construction industry standards. Our hydraulic effi ciencies reach well into the 80 percent range, signifi cantly more than competitive products. In the new millennium there will be a need for more effi cient pumps. It will no longer be acceptable to settle for a pump operating at 50% - 60% effi ciency. Cornell Pump Company has made these pumps obsolete.
Cornell’s priming system was specifi cally designed with the environment in mind. By using a positive sealing fl oat box and a diaphragm vacuum pump, there is absolutely no water carry-over to contaminate the environment. Cornell pumps are designed for the new millennium.
BENEFITS• Fully automatic priming and repriming• Handles air/liquid mixtures with ease• Rapidly primes and re-primes completely
unattended• Environmentally safe priming system designed to
prevent product leakage• Patented Cycloseal® and Run-Dry™ options• Handles large sized solids• High suction lift capability up to 28 feet• Premium hydraulic effi ciency for reduced energy
consumption• Flow rates to 38,000 GPM• Heads up to 800 FT.• Valve eliminates any liquid carry over
SETTING THE STANDARD AVAILABLE OPTIONSCORNELL PUMP COMPANY
DIAPHRAGM VACUUM PUMPCHECK VALVE
POSITIVE SEALING FLOAT BOX
FLOAT ASSEMBLY
BELT DRIVE
RUN-DRY™ SYSTEM CYCLOSEAL®
MOUNTING CONFIGURATIONSCornell’s Modular Frame design allows for easy adaptability. Choose a pump, then pick the mounting confi guration best suited to your application. Right hand and left hand rotation along with tangential or centerline discharges are available for most pumps.
FHORIZONTAL FRAME
MOUNTED
RUN-DRY™ OPTIONRun your pump dry without the use of expensive water systems and without mechanical seal damage. Cornell’s Run-Dry™ system consists of an auxiliary gland which provides containment for an application-specifi c lubricant present at the inside diameter of the mechanical seal faces. This lubricant prevents dry running of the seal faces while priming, re-priming, and on standby. The Run-Dry™ gland is connected to a lubricant reservoir via inlet and outlet lines which are oriented tangentially to the pump shaft so that shaft rotation provides circulation and subsequent cooling of the lubricant.of the lubricant.
Cornell’s two- and three-port enclosed impellers are designed to handle large solids and maintain exceptional hydraulic effi ciencies. Cornell’s Delta™ style impeller is specifi cally designed for handling stringy materials and heavy sludge for low- to medium-head applications. The three- or four-vane, semi-open impeller generates a cutting action designed to handle concentrated slurries for high head applications.
SOLIDS HANDLINGIMPELLER OPTIONS
CYCLOSEAL®
RUN-DRY™ OIL RESERVOIR
CYCLOSEAL® DEFLECTOR VANES
RUN-DRY™GLAND
SINGLE MECHANICALSEAL
IMPELLERBACKVANES
Cornell’s Cycloseal® design has proven itself in the toughest applications from manure slurry to starch recovery to sewer bypass and mining applications - in some cases more than tripling the normally expected mechanical seal life.
EMENGINE MOUNTED
(SAE SIZE)
CORNELL REDI-PRIME ®
1
2
3
Cornell’s Redi-Prime®
pumps are designed and engineered for the most rugged and demanding industries; construction, industrial, rental and municipal. With over 50 years of proven experience and reliability. Cornell Pump Company has established the highest industry standard for premium quality and rugged performance. Our pumps are backed by an industry-leading two-year warranty.
6822MX 4622MX
3419MX 6NHTB19
Designed to handle high head applications while providing a long service life. The new high head MX SERIES pumps have multi-vane, enclosed impellers designed for INDUSTRY LEADING EFFICIENCY. The MX SERIES pumps have extra heavy wall thickness, high quality construction, CA6NM impellers and are available in a horizontal frame & SAE engine mounted confi gurations.
4622MX
heavy wall thickness, high quality construction, CA6NM impellers and are available in a horizontal frame & SAE engine heavy wall thickness, high quality construction, CA6NM impellers and are available in a horizontal frame & SAE engine
• High Operating Pressures• High Flow Requirements• Dependable, High Quality Construction• Available in Horizontal Frame Mount & SAE Engine Mount Styles• All Iron construction• Run-DryTM seal option• Ductile Iron case, CA6NM Impeller• Impeller wear ring optionally hardened to 375-425 BNH• Volute wear ring optionally hardened to 450-500 BHN• Double angular contact thrust bearings• 4142 Alloy Steel shaft• Oil fi tted or grease lubricated frames• 420HT shaft sleeves available for abrasive applications• Dynamically balanced Impellers
300 HP
500 HP
400 HP
600 HP
200 HP150 HP
700 HP
R
R
1200 RPM
1900 RPM
1800 RPM
1500 RPM
15 FT. (4.6 M.)10 FT. (3.0 M.)
20 FT. (6.1 M.)
7 FT. (2.1 M.)
NPSH REQUIRED30 FT. (9.1 M.)
Efficient by Design
75
74
757470
605040
7/22/09
900800700600500400300200100
HP x .746 = KWGPM x 3.785 = Liters/MinuteGPM x .227 = Cubic Meters/HourInches x 25.4 = MillimetersFeet x .305 = Meters
100
150
200
250
300
350
400
450
FEE
T
140
ME
TER
S
TOTA
L D
YN
AM
IC H
EA
D
120
100
80
60
40
500
3500
perfo
rman
ce a
djus
tmen
ts.
or li
quid
s m
ay re
quire
hor
sepo
wer
and
/or
Oth
er m
ount
ing
conf
igur
atio
ns, s
eal a
rran
gem
ents
coup
led
elec
tric
conf
igur
atio
n w
ith C
yclo
seal
.P
erfo
rman
ces
show
n ar
e fo
r coo
l wat
er, c
lose
-
VARIOUS
6822MX
VA
6822MX - VARIOUS
DOUBLE VOLUTE MOUNTING CONFIG.: F, VF, EM, VC
Suction Discharge No. vanes
Cornell Pump Company Portland, Oregon
NE
W P
AG
E
Solids Dia. SNImpeller Dia.Speed Style
21.95" ENCLOSED 2.00" 709 8" 6" 4
500 1000 1500 2000 25000 3000
CUBIC METERS PER HOUR
CAPACITY U.S. GALLONS PER MINUTE
550
600
650
700
160
180
200
4000
200 HP
250 HP
350 HP
100 HP
300 HP
150 HP
75 HP
R
R
1900 RPM
1800 RPM
1600 RPM
1400 RPM
1200 RPM
5 FT.(1.5 M.)
8 FT.(2.4 M.) 10 FT.(3.0 M.)
6 FT (1.8 M.) NPSH REQUIRED
55
6062
6565
62605550
Efficient by Design
SU
PE
RS
ED
ES
3/11/09
HP x .746 = KWGPM x 3.785 = Liters/MinuteGPM x .227 = Cubic Meters/HourInches x 25.4 = MillimetersFeet x .305 = Meters
100
150
200
250
300
350
400
450
FEE
T
140
ME
TER
S
TOTA
L D
YN
AM
IC H
EA
D
120
100
80
60
40
500
perfo
rman
ce a
djus
tmen
ts.
or li
quid
s m
ay re
quire
hor
sepo
wer
and
/or
Oth
er m
ount
ing
conf
igur
atio
ns, s
eal a
rran
gem
ents
coup
led
elec
tric
conf
igur
atio
n w
ith C
yclo
seal
.P
erfo
rman
ces
show
n ar
e fo
r coo
l wat
er, c
lose
-
8/25/09
VARIOUS
4622MX
VA
4622MX - VARIOUS RPM
SINGLE VOLUTE MOUNTING CONFIG.: F, VF, EM, VC
Suction Discharge No. vanes
Cornell Pump Company Portland, Oregon
Solids Dia. SNImpeller Dia.Speed Style
21.95" ENCLOSED .98 552 6" 4" 4
550
600
650
700
160
180
200
1600
35030025020015010050
14001200
CAPACITY0 1000800600400200
U.S. GALLONS PER MINUTE
CUBIC METERS PER HOUR
1800
200 HP
150 HP
50 HP
175 HP
75 HP
100 HP
125 HP
250 HP
R
R
2400 RPM
1600 RPM
1400 RPM
2200 RPM
1800 RPM
2000 RPM
20 FT. (6.1 M.) NPSHR13 FT. (4.0 M.)8 FT. (2.4 M.)6 FT. (1.8 M.)
4052
53
45
Efficient by Design
5550
175150125100755025
800
CUBIC METERS PER HOUR
CAPACITY U.S. GALLONS PER MINUTE7006000 500400300200100
0
280
800
600
400
200
FEE
T
240
200
160
120
80
40
ME
TER
S
300
500
700
900
100
TOTA
L D
YN
AM
IC H
EA
D
53" 4"450.70"ENCLOSED19.59"StyleSpeed Impeller Dia. N SSolids Dia. N
EW
PA
GE
Cornell Pump Company Portland, Oregon
HP x .746 = KWGPM x 3.785 = Liters/MinuteGPM x .227 = Cubic Meters/HourInches x 25.4 = MillimetersFeet x .305 = Meters No. vanesDischargeSuction
SINGLE VOLUTE MOUNTING CONFIG.: CC, VM, F, VF, EM, VC
3419MX - VARIOUS RPM
3419MX
VA
VARIOUS
6/03/09
DO NOT OPERATE IN WHITE AREA
perfo
rman
ce a
djus
tmen
ts.
or li
quid
s m
ay re
quire
hor
sepo
wer
and
/or
Oth
er m
ount
ing
conf
igur
atio
ns, s
eal a
rran
gem
ents
coup
led
elec
tric
conf
igur
atio
n w
ith C
yclo
seal
.P
erfo
rman
ces
show
n ar
e fo
r coo
l wat
er, c
lose
-
450 HP200 HP
250 HP
300 HP
350 HP
400 HP
R
R
adju
stm
ents
.co
nfig
urat
ions
may
requ
ire p
erfo
rman
ce
Oth
er li
quid
s, s
eal a
rran
gem
ents
or m
ount
ing
fram
e m
ount
ed c
onfig
urat
ion
with
Cyc
lose
al.
Per
form
ance
s sh
own
are
for c
ool w
ater
,
SINGLE VOLUTE MOUNTING CONFIG.: CC, VM, F, VF, EM, VC
2100 RPM
2000 RPM
1900 RPM
1800 RPM
5 FT. (1.5 M)
17 FT. (5.2 M) NPSH REQUIRED
11 FT. (3.4 M)
8 FT. (2.4 M)
6 FT. (1.8 M)
Efficient by Design
5965
7172
71
69
65
69
72
U.S. GALLONS PER MINUTE
180
650
600
160
TOTA
L D
YN
AM
IC H
EA
D
ME
TER
S
FEE
T
100
150
200
250
300
350
400
500 1000 1500 2000 25000 3000
CUBIC METERS PER HOUR
600500400300200100
CAPACITY
120
100
80
60
40
26"10502.00"ENCLOSED19.50"StyleSpeed Impeller Dia. N SSolids Dia. N
EW
PA
GE
Cornell Pump Company Portland, Oregon
HP x .746 = KWGPM x 3.785 = Liters/MinuteGPM x .227 = Cubic Meters/HourInches x 25.4 = MillimetersFeet x .305 = Meters No. vanesDischargeSuction
6NHTB19 - VARIOUS RPM
6NH
TB19V
A
VARIOUS
9/17/09
3500 4000
700 800 900
450
500
550
140
8"
HIGH HEAD DEWATERING PUMPSHIGH HEAD DEWATERING PUMPSUP TO 25FT LIFT - HEADS TO 800FT - FLOWS TO 4000 GPM
In addition to a dependable pump system, today’s systems must also be effi cient and economical. As energy costs rise, conservation and effi ciency of operation become critical issues for customers as they strive to minimize expenses associated with energy consumption. Cornell pumps maintain superb hydraulic operating effi ciencies. The bottom line – Cornell pumps cost less to operate.
EFFICIENCY
MODEL DISCHARGE SIZE
MAX CAPACITY MAX SOLIDS MAX HEAD MAX SUCTION RPM
4NNTL 4” 1450 3” 175’ 25’ 2500
4NNT 4” 1400 3” 150’ 25’ 2000
4NHTA 4” 1400 3” 225’ 25’ 2100
4414T 4” 1400 3” 350’ 25’ 2000
4NHTB 4” 1,600 3” 425’ 25’ 2000
6NHTA 6” 2,700 3” 180’ 25’ 2000
6NNT 6” 2,550 3” 150’ 25’ 2100
6NHTB 6” 4,250 3.38” 350’ 25’ 1800
8NNT 8” 4,500 3.38” 255’ 25’ 1900
8NHTA 8” 5,000 3.38” 350’ 25’ 1800
8NHTH 8” 6,250 4” 255’ 25’ 1200
10NNT 10” 6,300 4” 340’ 25’ 1800
10NHTB 10” 8,000 4.75” 195’ 25’ 1200
10NHTA 10” 6,400 4.25” 245’ 25’ 1200
12NHTL 12” 5,200 4.25” 140’ 25’ 1500
12NNF 12” 8,500 3” 195’ 25’ 1800
12NHG28 12” 12,000 3.2” 410’ 25’ 1200
14NHG 14” 12,000 4” 210’ 25’ 1500
14NHGH 14” 13,500 4.25” 145’ 25’ 1200
14NHG28 14” 15,000 4.25” 430’ 25’ 1200
16NHGH 16” 13,500 4.25” 175’ 25’ 1200
16NHG22 16” 16,500 4.5” 265’ 25’ 1200
18NHG 18” 22,000 5” 220’ 25’ 900
18NHFL 18” 26,000 5” 190’ 25’ 890
18NHF34 18” 22,000 4.5” 320’ 25’ 900
20NHFL 20” 18,000 5” 116’ 25’ 720
24NNG 24” 32,000 5.25” 135’ 25’ 750
30NNT 30” 38,000 10.2” 110’ 25’ 585
PUMP OPTIONS: CLEAR LIQUID REDI-PRIME® PUMPSCornell off ers the widest range of pump sizes and capacities in the industry. No matter what your requirements are, Cornell can provide you with a package that will fi ll your needs – Clear Liquid pumps up to 10”, Solids Handling pumps up to 30” and Slurry pumps up to 4”.PUMP OPTIONS: SOLIDS HANDLING PUMPS
MODEL discharge size
max capacity
MAX solids
max head max suction
max rpm
2.5RB 2.5” 400 GPM .38” 300’ 25’ 2200
2.5H 2.5” 500 GPM .41” 360’ 25’ 2200
2.5YH 2.5” 750 GPM .41” 310’ 28’ 3000
3HC/HA 3” 1050 GPM .5” 490’ 28’ 2400
3RB 3” 800 GPM .5” 280’ 28’ 2200
3YL/YH 3” 1100 GPM .5” 245’ 28’ 2700
4HC 4” 1650 GPM .62” 470’ 28’ 2150
4RB 4” 1550 GPM .84” 270’ 25’ 2200
5HH 5” 2900 GPM .75” 375’ 25’ 2000
5RB 5” 2350 GPM 1” 360’ 25’ 2400
5YBH 5” 2500 GPM .75” 200’ 25’ 2400
6HH 6” 4000 GPM 1.22” 365’ 25’ 2000
6RB 6” 4250 GPM 1.31” 300’ 28’ 2200
6YB 6” 4100 GPM .75” 235’ 25’ 2400
8H 8” 5400 GPM 1.25” 305’ 25’ 2000
10RB 10” 7000 GPM 1.25” 300’ 25’ 2200
10YB 10” 6500 GPM 1.38” 200’ 25’ 2300
2.5RB2.5H2.5YH3HC / HA3RD / RB
3YL / YH4HC4RC / RB5HH5RC
5YBH6HH6RC / RB6YB8H
10RB10YB
CLEAR LIQUID REDI-PRIME® CURVES
1. 3NLT2. 4NNTL3. 4NNT4. 4NHTA5. 4414T 6. 4NHTB7. 6NHTA8. 6NNT9. 6NHT/TH10. 6NHTB
11. 8NNT12. 8NHTA13. 8NHTH14. 8NHTR15. 8NHGA16. 10NHTB17. 10NHTBH18. 10NHTA19. 12NHTL20. 12NHTM
21. 12NNF22. 12NHG2823. 14NHG24. 14NHGA25. 14NHGH26. 14NHG2827. 16NHGH28. 16NHG2229. 16NHG3230. 18NHG
31. 18NHFL32. 18NHF3433. 18NHG3434. 20NHFL35. 20NHF36. 24NNG37. 30NNT
SOLIDS HANDLING, DELTA IMPELLER, REDI-PRIME® CURVES
SOLIDS HANDLING, ENCLOSED IMPELLER
MODEL discharge size
max capacity
MAX solids
max head
max suction
max rpm
4NLDL 4” 525 GPM 3” 85’ 25’ 2,000
4NNDH 4” 750 GPM 3” 115’ 25’ 1,800
4NHDH 4” 1,050 GPM 3” 225’ 25’ 1,800
4NHM 4” 1,500 GPM 2.5” 380’ 25’ 2,200
6NHM 6” 2,500 GPM 3” 320’ 25’ 2,200
6NNDH 6” 2,400 GPM 3” 140’ 25’ 2,200
8NNDH 8” 1,625 GPM 3.38” 50’ 25’ 1,200
10NNDH 10” 5,000 GPM 3.5” 190’ 25’ 1,500
PUMP OPTIONS: DELTA™ IMPELLER PUMPS
REDI-PRIME TRAILER MOUNT PUMPING LARGE VOLUMES OF WATER IS SIMPLE FOR A CORNELL PUMP
HIGH VOLUME DEWATERING
SOLIDS HANDLING PUMPSSOLIDS HANDLING PUMPSFLOWS TO 38,000 GPM
WATER TRANSFER PUMPSWATER TRANSFER PUMPSSUCTION LIFT TO 28FT.
In addition to a dependable pump system, today’s systems must also be effi cient and economical. As energy costs rise, conservation and effi ciency of operation become critical issues for customers as they strive to minimize expenses associated with energy consumption. Cornell pumps maintain superb hydraulic operating effi ciencies. The bottom line – Cornell pumps cost less to operate.
EFFICIENCY
MODEL DISCHARGE SIZE
MAX CAPACITY MAX SOLIDS MAX HEAD MAX SUCTION RPM
4NNTL 4” 1450 3” 175’ 25’ 2500
4NNT 4” 1400 3” 150’ 25’ 2000
4NHTA 4” 1400 3” 225’ 25’ 2100
4414T 4” 1400 3” 350’ 25’ 2000
4NHTB 4” 1,600 3” 425’ 25’ 2000
6NHTA 6” 2,700 3” 180’ 25’ 2000
6NNT 6” 2,550 3” 150’ 25’ 2100
6NHTB 6” 4,250 3.38” 350’ 25’ 1800
8NNT 8” 4,500 3.38” 255’ 25’ 1900
8NHTA 8” 5,000 3.38” 350’ 25’ 1800
8NHTH 8” 6,250 4” 255’ 25’ 1200
10NNT 10” 6,300 4” 340’ 25’ 1800
10NHTB 10” 8,000 4.75” 195’ 25’ 1200
10NHTA 10” 6,400 4.25” 245’ 25’ 1200
12NHTL 12” 5,200 4.25” 140’ 25’ 1500
12NNF 12” 8,500 3” 195’ 25’ 1800
12NHG28 12” 12,000 3.2” 410’ 25’ 1200
14NHG 14” 12,000 4” 210’ 25’ 1500
14NHGH 14” 13,500 4.25” 145’ 25’ 1200
14NHG28 14” 15,000 4.25” 430’ 25’ 1200
16NHGH 16” 13,500 4.25” 175’ 25’ 1200
16NHG22 16” 16,500 4.5” 265’ 25’ 1200
18NHG 18” 22,000 5” 220’ 25’ 900
18NHFL 18” 26,000 5” 190’ 25’ 890
18NHF34 18” 22,000 4.5” 320’ 25’ 900
20NHFL 20” 18,000 5” 116’ 25’ 720
24NNG 24” 32,000 5.25” 135’ 25’ 750
30NNT 30” 38,000 10.2” 110’ 25’ 585
PUMP OPTIONS: CLEAR LIQUID REDI-PRIME® PUMPSCornell off ers the widest range of pump sizes and capacities in the industry. No matter what your requirements are, Cornell can provide you with a package that will fi ll your needs – Clear Liquid pumps up to 10”, Solids Handling pumps up to 30” and Slurry pumps up to 4”.PUMP OPTIONS: SOLIDS HANDLING PUMPS
MODEL discharge size
max capacity
MAX solids
max head max suction
max rpm
2.5RB 2.5” 400 GPM .38” 300’ 25’ 2200
2.5H 2.5” 500 GPM .41” 360’ 25’ 2200
2.5YH 2.5” 750 GPM .41” 310’ 28’ 3000
3HC/HA 3” 1050 GPM .5” 490’ 28’ 2400
3RB 3” 800 GPM .5” 280’ 28’ 2200
3YL/YH 3” 1100 GPM .5” 245’ 28’ 2700
4HC 4” 1650 GPM .62” 470’ 28’ 2150
4RB 4” 1550 GPM .84” 270’ 25’ 2200
5HH 5” 2900 GPM .75” 375’ 25’ 2000
5RB 5” 2350 GPM 1” 360’ 25’ 2400
5YBH 5” 2500 GPM .75” 200’ 25’ 2400
6HH 6” 4000 GPM 1.22” 365’ 25’ 2000
6RB 6” 4250 GPM 1.31” 300’ 28’ 2200
6YB 6” 4100 GPM .75” 235’ 25’ 2400
8H 8” 5400 GPM 1.25” 305’ 25’ 2000
10RB 10” 7000 GPM 1.25” 300’ 25’ 2200
10YB 10” 6500 GPM 1.38” 200’ 25’ 2300
2.5RB2.5H2.5YH3HC / HA3RD / RB
3YL / YH4HC4RC / RB5HH5RC
5YBH6HH6RC / RB6YB8H
10RB10YB
CLEAR LIQUID REDI-PRIME® CURVES
1. 3NLT2. 4NNTL3. 4NNT4. 4NHTA5. 4414T 6. 4NHTB7. 6NHTA8. 6NNT9. 6NHT/TH10. 6NHTB
11. 8NNT12. 8NHTA13. 8NHTH14. 8NHTR15. 8NHGA16. 10NHTB17. 10NHTBH18. 10NHTA19. 12NHTL20. 12NHTM
21. 12NNF22. 12NHG2823. 14NHG24. 14NHGA25. 14NHGH26. 14NHG2827. 16NHGH28. 16NHG2229. 16NHG3230. 18NHG
31. 18NHFL32. 18NHF3433. 18NHG3434. 20NHFL35. 20NHF36. 24NNG37. 30NNT
SOLIDS HANDLING, DELTA IMPELLER, REDI-PRIME® CURVES
SOLIDS HANDLING, ENCLOSED IMPELLER
MODEL discharge size
max capacity
MAX solids
max head
max suction
max rpm
4NLDL 4” 525 GPM 3” 85’ 25’ 2,000
4NNDH 4” 750 GPM 3” 115’ 25’ 1,800
4NHDH 4” 1,050 GPM 3” 225’ 25’ 1,800
4NHM 4” 1,500 GPM 2.5” 380’ 25’ 2,200
6NHM 6” 2,500 GPM 3” 320’ 25’ 2,200
6NNDH 6” 2,400 GPM 3” 140’ 25’ 2,200
8NNDH 8” 1,625 GPM 3.38” 50’ 25’ 1,200
10NNDH 10” 5,000 GPM 3.5” 190’ 25’ 1,500
PUMP OPTIONS: DELTA™ IMPELLER PUMPS
REDI-PRIME TRAILER MOUNT PUMPING LARGE VOLUMES OF WATER IS SIMPLE FOR A CORNELL PUMP
HIGH VOLUME DEWATERING
SOLIDS HANDLING PUMPSSOLIDS HANDLING PUMPSFLOWS TO 38,000 GPM
WATER TRANSFER PUMPSWATER TRANSFER PUMPSSUCTION LIFT TO 28FT.
CORNELL REDI-PRIME ®
1
2
3
Cornell’s Redi-Prime®
pumps are designed and engineered for the most rugged and demanding industries; construction, industrial, rental and municipal. With over 50 years of proven experience and reliability. Cornell Pump Company has established the highest industry standard for premium quality and rugged performance. Our pumps are backed by an industry-leading two-year warranty.
6822MX 4622MX
3419MX 6NHTB19
Designed to handle high head applications while providing a long service life. The new high head MX SERIES pumps have multi-vane, enclosed impellers designed for INDUSTRY LEADING EFFICIENCY. The MX SERIES pumps have extra heavy wall thickness, high quality construction, CA6NM impellers and are available in a horizontal frame & SAE engine mounted confi gurations.
4622MX
heavy wall thickness, high quality construction, CA6NM impellers and are available in a horizontal frame & SAE engine heavy wall thickness, high quality construction, CA6NM impellers and are available in a horizontal frame & SAE engine
• High Operating Pressures• High Flow Requirements• Dependable, High Quality Construction• Available in Horizontal Frame Mount & SAE Engine Mount Styles• All Iron construction• Run-DryTM seal option• Ductile Iron case, CA6NM Impeller• Impeller wear ring optionally hardened to 375-425 BNH• Volute wear ring optionally hardened to 450-500 BHN• Double angular contact thrust bearings• 4142 Alloy Steel shaft• Oil fi tted or grease lubricated frames• 420HT shaft sleeves available for abrasive applications• Dynamically balanced Impellers
300 HP
500 HP
400 HP
600 HP
200 HP150 HP
700 HP
R
R
1200 RPM
1900 RPM
1800 RPM
1500 RPM
15 FT. (4.6 M.)10 FT. (3.0 M.)
20 FT. (6.1 M.)
7 FT. (2.1 M.)
NPSH REQUIRED30 FT. (9.1 M.)
Efficient by Design
75
74
757470
605040
7/22/09
900800700600500400300200100
HP x .746 = KWGPM x 3.785 = Liters/MinuteGPM x .227 = Cubic Meters/HourInches x 25.4 = MillimetersFeet x .305 = Meters
100
150
200
250
300
350
400
450
FEE
T
140
ME
TER
S
TOTA
L D
YN
AM
IC H
EA
D
120
100
80
60
40
500
3500
perfo
rman
ce a
djus
tmen
ts.
or li
quid
s m
ay re
quire
hor
sepo
wer
and
/or
Oth
er m
ount
ing
conf
igur
atio
ns, s
eal a
rran
gem
ents
coup
led
elec
tric
conf
igur
atio
n w
ith C
yclo
seal
.P
erfo
rman
ces
show
n ar
e fo
r coo
l wat
er, c
lose
-
VARIOUS
6822MX
VA
6822MX - VARIOUS
DOUBLE VOLUTE MOUNTING CONFIG.: F, VF, EM, VC
Suction Discharge No. vanes
Cornell Pump Company Portland, Oregon
NE
W P
AG
E
Solids Dia. SNImpeller Dia.Speed Style
21.95" ENCLOSED 2.00" 709 8" 6" 4
500 1000 1500 2000 25000 3000
CUBIC METERS PER HOUR
CAPACITY U.S. GALLONS PER MINUTE
550
600
650
700
160
180
200
4000
200 HP
250 HP
350 HP
100 HP
300 HP
150 HP
75 HP
R
R
1900 RPM
1800 RPM
1600 RPM
1400 RPM
1200 RPM
5 FT.(1.5 M.)
8 FT.(2.4 M.) 10 FT.(3.0 M.)
6 FT (1.8 M.) NPSH REQUIRED
55
6062
6565
62605550
Efficient by Design
SU
PE
RS
ED
ES
3/11/09
HP x .746 = KWGPM x 3.785 = Liters/MinuteGPM x .227 = Cubic Meters/HourInches x 25.4 = MillimetersFeet x .305 = Meters
100
150
200
250
300
350
400
450
FEE
T
140
ME
TER
S
TOTA
L D
YN
AM
IC H
EA
D
120
100
80
60
40
500
perfo
rman
ce a
djus
tmen
ts.
or li
quid
s m
ay re
quire
hor
sepo
wer
and
/or
Oth
er m
ount
ing
conf
igur
atio
ns, s
eal a
rran
gem
ents
coup
led
elec
tric
conf
igur
atio
n w
ith C
yclo
seal
.P
erfo
rman
ces
show
n ar
e fo
r coo
l wat
er, c
lose
-
8/25/09
VARIOUS
4622MX
VA
4622MX - VARIOUS RPM
SINGLE VOLUTE MOUNTING CONFIG.: F, VF, EM, VC
Suction Discharge No. vanes
Cornell Pump Company Portland, Oregon
Solids Dia. SNImpeller Dia.Speed Style
21.95" ENCLOSED .98 552 6" 4" 4
550
600
650
700
160
180
200
1600
35030025020015010050
14001200
CAPACITY0 1000800600400200
U.S. GALLONS PER MINUTE
CUBIC METERS PER HOUR
1800
200 HP
150 HP
50 HP
175 HP
75 HP
100 HP
125 HP
250 HP
R
R
2400 RPM
1600 RPM
1400 RPM
2200 RPM
1800 RPM
2000 RPM
20 FT. (6.1 M.) NPSHR13 FT. (4.0 M.)8 FT. (2.4 M.)6 FT. (1.8 M.)
4052
53
45
Efficient by Design
5550
175150125100755025
800
CUBIC METERS PER HOUR
CAPACITY U.S. GALLONS PER MINUTE7006000 500400300200100
0
280
800
600
400
200
FEE
T
240
200
160
120
80
40
ME
TER
S
300
500
700
900
100
TOTA
L D
YN
AM
IC H
EA
D
53" 4"450.70"ENCLOSED19.59"StyleSpeed Impeller Dia. N SSolids Dia. N
EW
PA
GE
Cornell Pump Company Portland, Oregon
HP x .746 = KWGPM x 3.785 = Liters/MinuteGPM x .227 = Cubic Meters/HourInches x 25.4 = MillimetersFeet x .305 = Meters No. vanesDischargeSuction
SINGLE VOLUTE MOUNTING CONFIG.: CC, VM, F, VF, EM, VC
3419MX - VARIOUS RPM
3419MX
VA
VARIOUS
6/03/09
DO NOT OPERATE IN WHITE AREA
perfo
rman
ce a
djus
tmen
ts.
or li
quid
s m
ay re
quire
hor
sepo
wer
and
/or
Oth
er m
ount
ing
conf
igur
atio
ns, s
eal a
rran
gem
ents
coup
led
elec
tric
conf
igur
atio
n w
ith C
yclo
seal
.P
erfo
rman
ces
show
n ar
e fo
r coo
l wat
er, c
lose
-
450 HP200 HP
250 HP
300 HP
350 HP
400 HP
R
R
adju
stm
ents
.co
nfig
urat
ions
may
requ
ire p
erfo
rman
ce
Oth
er li
quid
s, s
eal a
rran
gem
ents
or m
ount
ing
fram
e m
ount
ed c
onfig
urat
ion
with
Cyc
lose
al.
Per
form
ance
s sh
own
are
for c
ool w
ater
,
SINGLE VOLUTE MOUNTING CONFIG.: CC, VM, F, VF, EM, VC
2100 RPM
2000 RPM
1900 RPM
1800 RPM
5 FT. (1.5 M)
17 FT. (5.2 M) NPSH REQUIRED
11 FT. (3.4 M)
8 FT. (2.4 M)
6 FT. (1.8 M)
Efficient by Design
5965
7172
71
69
65
69
72
U.S. GALLONS PER MINUTE
180
650
600
160
TOTA
L D
YN
AM
IC H
EA
D
ME
TER
S
FEE
T
100
150
200
250
300
350
400
500 1000 1500 2000 25000 3000
CUBIC METERS PER HOUR
600500400300200100
CAPACITY
120
100
80
60
40
26"10502.00"ENCLOSED19.50"StyleSpeed Impeller Dia. N SSolids Dia. N
EW
PA
GE
Cornell Pump Company Portland, Oregon
HP x .746 = KWGPM x 3.785 = Liters/MinuteGPM x .227 = Cubic Meters/HourInches x 25.4 = MillimetersFeet x .305 = Meters No. vanesDischargeSuction
6NHTB19 - VARIOUS RPM
6NH
TB19V
A
VARIOUS
9/17/09
3500 4000
700 800 900
450
500
550
140
8"
HIGH HEAD DEWATERING PUMPSHIGH HEAD DEWATERING PUMPSUP TO 25FT LIFT - HEADS TO 800FT - FLOWS TO 4000 GPM
...is setting the standard for the construction pumping industry. Flow characteristics that were ‘good enough’ before are no longer acceptable. Cornell’s innovative engineering and forward thinking have made our pumps capable of producing up to 400 percent more fl ow than the construction industry standards. Our hydraulic effi ciencies reach well into the 80 percent range, signifi cantly more than competitive products. In the new millennium there will be a need for more effi cient pumps. It will no longer be acceptable to settle for a pump operating at 50% - 60% effi ciency. Cornell Pump Company has made these pumps obsolete.
Cornell’s priming system was specifi cally designed with the environment in mind. By using a positive sealing fl oat box and a diaphragm vacuum pump, there is absolutely no water carry-over to contaminate the environment. Cornell pumps are designed for the new millennium.
BENEFITS• Fully automatic priming and repriming• Handles air/liquid mixtures with ease• Rapidly primes and re-primes completely
unattended• Environmentally safe priming system designed to
prevent product leakage• Patented Cycloseal® and Run-Dry™ options• Handles large sized solids• High suction lift capability up to 28 feet• Premium hydraulic effi ciency for reduced energy
consumption• Flow rates to 38,000 GPM• Heads up to 800 FT.• Valve eliminates any liquid carry over
SETTING THE STANDARD AVAILABLE OPTIONSCORNELL PUMP COMPANY
DIAPHRAGM VACUUM PUMPCHECK VALVE
POSITIVE SEALING FLOAT BOX
FLOAT ASSEMBLY
BELT DRIVE
RUN-DRY™ SYSTEM CYCLOSEAL®
MOUNTING CONFIGURATIONSCornell’s Modular Frame design allows for easy adaptability. Choose a pump, then pick the mounting confi guration best suited to your application. Right hand and left hand rotation along with tangential or centerline discharges are available for most pumps.
FHORIZONTAL FRAME
MOUNTED
RUN-DRY™ OPTIONRun your pump dry without the use of expensive water systems and without mechanical seal damage. Cornell’s Run-Dry™ system consists of an auxiliary gland which provides containment for an application-specifi c lubricant present at the inside diameter of the mechanical seal faces. This lubricant prevents dry running of the seal faces while priming, re-priming, and on standby. The Run-Dry™ gland is connected to a lubricant reservoir via inlet and outlet lines which are oriented tangentially to the pump shaft so that shaft rotation provides circulation and subsequent cooling of the lubricant.of the lubricant.
Cornell’s two- and three-port enclosed impellers are designed to handle large solids and maintain exceptional hydraulic effi ciencies. Cornell’s Delta™ style impeller is specifi cally designed for handling stringy materials and heavy sludge for low- to medium-head applications. The three- or four-vane, semi-open impeller generates a cutting action designed to handle concentrated slurries for high head applications.
SOLIDS HANDLINGIMPELLER OPTIONS
CYCLOSEAL®
RUN-DRY™ OIL RESERVOIR
CYCLOSEAL® DEFLECTOR VANES
RUN-DRY™GLAND
SINGLE MECHANICALSEAL
IMPELLERBACKVANES
Cornell’s Cycloseal® design has proven itself in the toughest applications from manure slurry to starch recovery to sewer bypass and mining applications - in some cases more than tripling the normally expected mechanical seal life.
EMENGINE MOUNTED
(SAE SIZE)
REDI-PRIME PUMPSCORNELL PUMP COMPANY
Cornell Pump Company16261 SE 130th AveClackamas, OR 97015P: (503) 653-0330F: (503) 653-0338
Efficient by Design
CORNELLPUMP.COM©2011 CORNELL PUMP COMPANY
THE CORNELL PRODUCT LINE
Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001;
6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
*To visit our REDI_PRIME webpage on your smartphone, scan the QR code below:
Cycloseal®, Hot Cycloseal®, and Redi-Prime® are Registered Trademarks of Cornell Pump Company.
Cornell pumps and products are the subject of one or more of the following U.S. and Foreign patents: 3,207,485; 3,282,226; 3,295,456; 3,301,191; 3,630,637; 3,663,117; 3,743,437; 4,335,886; 4,523,900; 5,489,187; 5,591,001; 6,074,554; 6,036,434; 6,079,958; 6,309,169; 2,320,742; 96/8140; 319,837; 918,534; 1,224,969; 2,232,735; 701,979 and are the subject of pending U.S. and Foreign Patent Applications.
self-priming
refrigeration municipal food process industrial
submersible hydro-turbine agricultureTHE CORNELL PRODUCT LINE
MINE DEWATERINGCORNELL PUMP COMPANY
WHEN RELIABILITY MATTERS
SELF-PRIMING SUBMERSIBLE TURBINE AGRICULTURAL
REFRIGERATION
REDI-PRIME
MUNICIPAL
MINE DEWATERING
FOOD PROCESS
CORPORATE
INDUSTRIAL
IMMERSIBLE
WHEN RELIABILITY MATTERS