WHEELED LOADING SHOVEL | 427/437

427 – Operating weight: 28777lbs Gross rated power: 158hp Full turn tipping load: 17749lbs Standard shovel capacity: 3.1yd³437 – Operating weight: 33631lbs Gross rated power: 173hp Full turn tipping load: 19963lbs Standard shovel capacity: 3.5yd³

WHEELED LOADING SHOVEL | 427/437

CLEANER, QUIETER AND MORE EFFICIENT.

A quality process pages 4 – 5

Productive performance pages 6 – 7

Efficient by design pages 8 – 9

Comfortably superior pages 10 – 11

Low maintenance, long intervals pages 12 – 13

Drive safely page 14

LiveLink, knowledge is power page 15

Value added page 16

Specification pages 17 – 27

427/437 WHEELED LOADING SHOVEL2

CLEANER, QUIETER AND MORE EFFICIENT

427/437 WHEELED LOADING SHOVEL 3

A QUALITY PROCESS.

Quality built in.

1 Finite element analysis and rig testing ensure superior structural strength and durability. Cold cell testing guarantees starting performance down to -4ºF.

2 Precision machining provides high tolerances and accurate location of pins and bushes.

3 The 427 and 437 can be specified for heavy-duty applications like waste or corrosive material handling.

1 1 32

We use state-of-the-art manufacturing processes like robot machining, precision paint technology and innovative assembly techniques to achieve the very highest levels of quality.

WE KNOW THAT A WHEELED LOADING SHOVEL IS A KEY PART OF THE ON-SITE PROCESS. THAT’S WHY THE JCB 427 AND 437 ARE BUILT ON A FOUNDATION OF QUALITY AND RELIABILITY. THE PROCESSES WE’VE USED TO DESIGN AND MANUFACTURE THEM WILL SAFEGUARD YOUR WORKING PROCESS, HOUR AFTER HOUR, DAY AFTER DAY.


2

Well articulated.

4 The articulation joint has a heavy-duty box section – much stronger than a single plate with a boss. Steering rams are positioned high up and well protected from possible impact and site damage.

5 Hoses are neatly routed and clamped through the articulation joint, well away from any pinch points.

Protecting ancillaries.

6 Recessed rear lights are protected within the solid counterweight casting.

7 The rear counterweight and cast quarter pillars protect the cooling pack and the back end of the machine from damage.

A QUALITY PROCESS

The articulation joint has a heavy-duty center pin and oversized bush, as well as twin taper roller bearings on the bottom box joints. This can tolerate both vertical and horizontal loadings for durability and rigidity.

5 6

4

7


PRODUCTIVE PERFORMANCE.

Engine productivity.

1 The Cummins 408 cubic inch litre engine achieves high power (173hp in the 437 and 158hp in the 427). Peak engine torque of 591 lb ft is achieved on both models at low revs for excellent response. The engine is Tier 4i/stage 3b emissions compliant, using an oxidation catalyst but with out the need of SCR or a Diesel Particulate Filter.

1 A variable geometry turbocharger provides increased performance at low engine speed for improved cycle times and tractive effort.

Loading productivity.

2 JCB’s optional quickhitch makes attachment changing quick and efficient. The quickhitch is designed to be compatible with aftermarket attachments too.

3 Powerful twin variable displacement piston pump hydraulics can circulate a massive 70 gallons/min for fast cycles and excellent multi function capability.

THE 427 AND 437 CAN PERFORM GREAT FEATS OF PRODUCTIVITY. WITH HIGH POWER AND TORQUE, BOTH MACHINES MEET TIER 4i/STAGE 3B EMISSIONS LEGISLATION WITHOUT NEEDING A DPF OR SCR SYSTEM.

1

32

Need new graphs

Need new graphs

hp

RPM

POWER

67 800 1200 1500 1700 1900 2100

97

127

158

188

lb ft

RPM

TORQUE

0800 1200 1500 1700 1900 2100

166

332

498

664

hp

RPM

POWER

67 800 1200 1500 1700 1900 2100

97

127

158

188

lb ft

RPM

TORQUE

0800 1200 1500 1700 1900 2100

166

332

498

664

427 437


Loading productivity (continued).

4 You can choose your ideal loader arm on a 427/437, with z-bar linkage (ZX) for high breakout applications or high torque (HT) for parallel lift and multi-attachment use.

5 Choose a HT high lift on the 427 or 437, or super high lift HT on the 437 and you can use the machine for higher loading height applications.

Drivetrain productivity.

6 The 427 and 437’s optional 5-speed transmission with torque convertor lock-up provides closer ratios for better acceleration, hill climbing and roading performance. The lock-up element eliminates losses from the torque converter for faster cycle times and improved efficiency.

7 The innovative electronic management can perform progressive clutch cut-off for efficient, productive loader control. This feature controls tractive effort via the transmission, diverting maximum power to the loader hydraulics and reducing service brake wear and fuel consumption.

8 With a range of axle options you can tailor a 427/437 to any application.

› Open differentials are ideal for hard standing ground conditions.

› Limited slip differential is perfect for soft, muddy terrain with reduced traction.

› Open differentials with an automatic locking front axle differential provide excellent traction in varied ground conditions.

5

4

PRODUCTIVE PERFORMANCE

8

7

6

5

Z bar (ZX) High Torque (HT) HT High Lift HT Super High Lift


EFFICIENT BY DESIGN.

An efficient engine.

1 Automatic idle returns the engine to 700rpm after 30 seconds of inactivity.

2 The 427/437’s Eco mode limits engine speed to 1800rpm for reduced fuel consumption. Productivity remains formidable.

An efficient driveline.

3 Our torque lock-up 5 speed transmission option gives 100% efficiency in gears 2 to 5 for improved fuel consumption. Closer gear ratios provide lower engine speed in each gear.

4 Wheel speed braking means the brakes rotate at the same speed as the wheels for heat and drag reduction, as well as improved fuel economy.

5 Available on the 427 Agri model is the optional 6-speed gearbox giving optimum gear matching to the application, also features LUC from 2 to 6.

THE JCB 427 AND 437 ARE DESIGNED TO MOVE MORE MATERIAL FOR LESS. TO ACHIEVE THIS, WE’VE DESIGNED THE ENGINE, AXLES, DRIVELINE AND HYDRAULICS TO WORK IN HARMONY WITH EACH OTHER, FOR ULTIMATE EFFICIENCY.

2 3

Our engine idle shutdown safely applies the brakes and turns the 427/437 off after a programmable amount of time.

1


An efficient hydraulic system.

6 A hydraulic cooling fan automatically reacts to ambient temperature and adjusts the fan speed to optimize cooling and reduce fuel consumption. This also lowers noise.

7 Unloaded spool valves in the valve block mean that arms lower under gravitational, not hydraulic force, reducing fuel consumption.

6 7

JCB’s innovative variable displacement pumps feed a load-sensing valve block which only consumes power on demand, providing precise, efficient loader control.

54


EFFICIENT BY DESIGN

COMFORTABLY SUPERIOR.

In control.

1 A tilting and telescopic steering column provides easy adjustment for maximum comfort.

2 A range of loader controls; multi-lever, joystick, or joystick with proportional auxiliary controls.

3 A stylish, modern central dash display combines analogue dials and a color LCD screen – this can display machine health details, service requirements, operating information and more.

KEEPING OPERATORS FRESH AND ALERT ALL DAY LONG RESULTS IN INCREASED SAFETY AND PRODUCTIVITY. WITH THAT IN MIND, THE 3M³ CAB IS ROOMY, EASY TO ACCESS, AND QUIET. IT ALSO HAS EXCELLENT VISIBILITY AND INTUITIVE TO USE ERGONOMIC CONTROLS.

2 2

The 427 and 437 have a range of seat options: mechanical or air suspension, vinyl or fabric bases, or even our Actimo XXL option. It’s heated with air suspension, lumbar support, armrests, backrest extension and a headrest, all with full adjustment.

3

31


A comfortable environment.

4 The 427 and 437 have air conditioning and automatic climate control options to create perfect working temperatures.

Exterior comforts.

5 3 or 4 spool hydraulics and a quickhitch enable many attachments to be used easily for extra versatility.

6 The selectable loader arm detents mean operators can set loader arm height limitations, return to dig and float functions for improved safety and productivity.

7 JCB Smoothride load suspension limits shock loadings and therefore reduces material spillage and structural stress, as well as increasing operator comfort.

8 A 3-piece laminated front screen provides excellent visibility while interior mirrors, heated exterior mirrors, an optional reverse camera and a sloping rear hood give good rearward views.

4

7

8

65


COMFORTABLY SUPERIOR

LOW MAINTENANCE LONG INTERVALS.

A WHEELED LOADING SHOVEL NEEDS TO SPEND THE MAXIMUM AMOUNT OF TIME HARD AT WORK. WE’VE DESIGNED THE 427 AND 437 TO DO JUST THAT, WITH LONG SERVICE INTERVALS AND QUALITY COMPONENTS.

3

Access all areas.

1 Gain access to the engine bay and cooling pack areas easily with wide-opening gullwing doors.

2 The 427 and 437 have a large single faced cooling package for unrivalled quick, easy and safe cleaning.

3 Ground level daily check and grease point access makes life easier and safer.

Looking after itself.

4 An electronic monitoring system relays machine condition giving real time alerts, safeguarding the machine and operator.

5 With the optional auto lubrication kit your machine will take care of its own greasing requirements.

6 The optional widecore cooling pack and reversing fan will ensure cooling efficiency in environments with large amounts of airborne debris. 5

5

4

1

2

6

Green = standard operation Blue = reverse operation


8

7 9

7

Quality built in.

7 By using top components in the 427 and 437 (Cummins engine, ZF transmissions and axles, Rexroth pumps and Parker valve blocks), we’ve built in long service life as standard.

8 Full hydraulic dual circuit braking with multiple oil immersed disks gives the braking system a virtually maintenance-free lifespan.

9 Check brake, steering and hydraulic system pressures easily on a 427 and 437 with group test ports.


LOW MAINTENANCE LONG INTERVALS

DRIVE SAFELY.

THE 427 AND 437 ARE DESIGNED TO KEEP THE OPERATOR SAFE AT ALL TIMES. GREAT VISIBILITY, NON-SLIP SURFACES AND AIR FILTRATION IS JUST THE START.

Safety first.

1 Our optional rear-view camera displays an unobstructed rear view on an in-cab color monitor.

2 Access steps are inclined and equally spaced, complemented by well positioned grab handles for three points of contact at all times.

3 The 427 and 437 have interior mirrors, heated exterior mirrors and hood mirrors for superb all round visibility.

4 Non-slip walkways and additional grab handle options allow for safe moving around the machine.

5 The cab is isolator-mounted, compliant with ROPS/FOPS standards, and positively pressurized against dust. You can choose from fresh air, carbon and P3 – HEPA recirculation filters as well.

4

2

3

3

5 1


JCB LIVELINK IS AN INNOVATIVE SOFTWARE SYSTEM THAT LETS YOU MONITOR AND MANAGE YOUR MACHINES REMOTELY – ONLINE, BY EMAIL OR BY MOBILE PHONE.LIVELINK GIVES YOU ACCESS TO A WHOLE HOST OF USEFUL DATA, INCLUDING MACHINE ALERTS, FUEL REPORTS* AND EVENT HISTORY INFORMATION.ALL YOUR MACHINE INFORMATION IS HANDLED AT A SECURE DATA CENTER FOR YOUR PEACE OF MIND.

Maintenance benefitsJCB LiveLink makes it easy to manage machine maintenance. Accurate hours monitoring and service alerts improve maintenance planning, and real-time location data helps you manage your fleet. You’ll also have access to critical machine alerts and

maintenance history records.

Security benefitsKeep your machine operating safely with JCB Livelink. Real-time geofencing alerts tell you when machines move out of predetermined operating zones, and real-time curfew alerts inform you if machines are being used when they’re not supposed to be. Real time location information helps you store your machines in the safest places.

Productivity and cost benefitsFor ultimate productivity and cost-saving, JCB LiveLink provides information like idle time monitoring* and machine fuel consumption* to help reduce your fuel usage. Machine location information can improve fleet efficiency and you may even enjoy reduced insurance costs courtesy of the added security that LiveLink brings.

* These features require an electronic engine.


LIVELINK, KNOWLEDGE IS POWER.

VALUE ADDED.

1 Our Technical Support Service provides instant access to factory expertise, day or night, while our Finance and Insurance teams are always on hand to provide fast, flexible, competitive quotes.

2 The global network of JCB Parts Centers is another model of efficiency; with 15 regional bases, we can deliver around 95% of all parts anywhere in the world within 24 hours. Our genuine JCB parts are designed to work in perfect harmony with your machine for optimum performance and productivity.

3 JCB Assetcare offers comprehensive extended warranties and service agreements, as well as service-only or repair and maintenance contracts. Irrespective of what you opt for, our Maintenance teams around the world charge competitive labour rates, and offer non-obligation quotations as well as fast, efficient insurance repair work.

2

JCB’S WORLDWIDE CUSTOMER SUPPORT IS FIRST CLASS. WHATEVER YOU NEED AND WHEREVER YOU ARE, WE’LL BE AVAILABLE QUICKLY AND EFFICIENTLY TO HELP MAKE SURE YOUR MACHINERY IS PERFORMING TO ITS FULL POTENTIAL.

Manufacturing Facilities DealersParts Distribution Centers

3

Note: JCB LIVELINK and JCB ASSETCARE may not be available in your region, so please check with your local dealer.


1

SPECIFICATION427/437 WHEELED LOADING SHOVEL

STATIC DIMENSIONS

427 HT 437 HT 427 HT HL 437 HT HL 437 HT SHL 427 ZX 437 ZX

A Overall length ft in 22' 5" 22' 9" 23' 9" 23' 11" 25' 4" 22' 5" 23' 6"

B Axle to pivot pin ft in 3' 7" 3' 9" 4' 11" 4' 11" 7' 9" 3' 7" 3' 9"

C Wheel base ft in 9' 10" 9' 10" 9' 10" 9' 10" 9' 10" 9' 10" 9' 10"

D Axle to counterweight face ft in 5' 11" 5' 11" 5' 11" 5' 11" 5' 11" 5' 11" 5' 11"

E Minimum ground clearance ft in 1' 5" 1' 6" 1' 5" 1' 6" 1' 6" 1' 5" 1' 6"

F Height over exhaust ft in 10' 7" 10' 7" 10' 7" 10' 7" 10' 7" 10' 7" 10' 7"

G Width over cab ft in 4' 7" 4' 7" 4' 7" 4' 7" 4' 7" 4' 7" 4' 7"

H Width over tires ft in 8' 2" 8' 6" 8' 6" 8' 6" 8' 6" 8' 2" 8' 6"

H1 Wheel track ft in "6' 5"" 6' 9" 6' 9" 6' 9" 6' 9" 6' 5" 6' 9"

J Height over cab ft in 10' 11" 10' 11" 10' 11" 10' 11" 10' 11" 10' 11" 10' 11"

Pin height (maximum) ft in 12' 10" 13' 1" 14' 3" 15' 3" 17' 1" 12' 10" 13' 1"

Overall operating height ft in 16' 9" 17' 5" 18' 2" 19' 7" 21' 5" 16' 9" 17' 5"

Front axle weight lbs 12282 15258 14800 17040 19262 13658 16372

Rear axle weight lbs 15351 17344 11627 16601 15589 15119 17260

Total weight lbs 28074 32602 28631 33640 34859 28777 33632

Inside radius ft in 9' 7" 9' 3" 9' 3" 9' 3" 9' 3" 9' 7" 9' 3"

Maximum radius over shovel ft in 19' 0" 19' 3" 19' 8" 19' 8" 20' 4" 19' 0" 19' 4"

Articulation angle degrees ± 40° ± 40° ± 40° ± 40° ± 40° ± 40° ± 40°

427 data based on machine equipped with direct mounted 2.5 yd3 bucket with toe plates and Michelin 20.5 R25 XHA2 (L3) radial tires 437 data based on machine equipped with direct mounted 3.1 yd3 bucket with toe plates and Michelin 20.5 R25 XHA2 (L3) radial tires

A

B C D

E

F

G

H

H1

J

LOADER DIMENSIONS – 427 HT

Assumes machine is fitted with 20.5 R25 Michelin XHA2 tires.

Model 427 HT 427 HT HL

Bucket mounting Direct Quickhitch Direct Quickhitch

Bucket type General purpose General purpose

Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate

Bucket capacity (SAE heaped) yd3 2.35 2.62 2.49 2.75 3.14 3.53 2.35 2.62 2.49 2.75 3.14 3.53 2.35 2.62 2.49 2.75 3.14 3.53 2.35 2.62 2.49 2.75 3.14 3.53

Bucket capacity (struck) yd3 2.04 2.31 2.11 2.39 2.69 3.07 2.03 2.29 2.08 2.34 2.69 3.07 2.04 2.31 2.11 2.39 2.69 3.07 2.03 2.29 2.08 2.34 2.69 3.07

Bucket width ft in 8' 4" 8' 4" 8' 4" 8' 4" 8' 10" 8' 10" 8' 4" 8' 4" 8' 4" 8' 4" 8' 10" 8' 10" 8' 4" 8' 4" 8' 4" 8' 4" 8' 10" 8' 10" 8' 4" 8' 4" 8' 4" 8' 4" 8' 10" 8' 10"

Bucket weight lbs 1786 1874 1786 1874 2504 2670 1764 1874 1764 1874 2504 2670 1786 1874 1786 1874 2504 2670 1764 1874 1764 1874 2504 2670

Maximum material density lbs/ft 146 129 138 123 103 90 133 118 126 112 94 82 122 108 115 103 86 75 111 98 105 94 79 68

Tipping load straight lbs 21647 21599 21647 21599 20578 20166 19804 19531 19804 19531 18858 18484 18076 18034 18076 18034 17183 16839 16537 16308 16537 16308 15745 15432

Tipping load full turn lbs 18510 18234 18510 18234 17514 17139 16865 16616 16865 16616 15968 15620 15454 15225 15454 15225 14623 14310 14083 13874 14083 13874 13334 13043

Payload lbs 9255 9118 9255 9118 8757 8569 8433 8307 8433 8307 7983 7809 7727 7613 7727 7613 7311 7154 7042 6936 7042 6934 6667 6521

Maximum break out force lbf 31024 28776 31024 28776 27651 25853 27202 25403 27202 25403 23830 22256 31024 28776 31024 28776 27651 25853 27202 25403 27202 25403 23830 22256

M Dump angle maximum degrees 49° 49° 49° 49° 49° 49° 49° 49° 49° 49° 49° 49° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

N Roll back angle full height degrees 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58° 58°

O Roll back at carry degrees 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 50° 50° 50° 50° 50° 50° 50° 50° 50° 50° 50° 50°

P Roll back at ground level degrees 43° 43° 43° 43° 43° 43° 43° 43° 43° 43° 43° 43° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48° 48°

Q Load over height ft in 11' 11" 11' 11" 11' 10" 11' 10" 11' 10" 11' 10" 11' 11" 11' 11" 11' 10" 11' 10" 11' 10" 11' 10" 13' 4" 13' 4" 13' 3" 13' 3" 13' 3" 13' 3" 13' 4" 13' 4" 13' 3" 13' 3" 13' 3" 13' 3"

R Dump height (45° dump) ft in 9' 3" 9' 1" 9' 8" 9' 6" 9' 5" 9' 2" 8' 10" 8' 8" 9' 4" 9' 1" 9' 0" 8' 9" 10' 8" 10' 6" 11' 1" 10' 11" 10' 10" 10' 7" 10' 6" 10' 3" 10' 9" 10' 6" 10' 5" 10' 2"

S Dig depth ft in 0' 2" 0' 2" 0' 2" 0' 2" 0' 2" 0' 2" 0' 2" 0' 2" 0' 2" 0' 2" 0' 2" 0' 2" 0' 4" 0' 4" 0' 4" 0' 4" 0' 4" 0' 4" 0' 5" 0' 4" 0' 4" 0' 4" 0' 4" 0' 4"

T Reach at dump height ft in 3' 6" 3' 8" 3' 1" 0' 4" 3' 4" 3' 7" 3' 11" 4' 1" 3' 5" 3' 8" 3' 9" 4' 0" 4' 1" 6' 6" 3' 8" 3' 10" 3' 11" 4' 1" 4' 1" 4' 1" 4' 0" 4' 2" 4' 4" 4' 6"

Reach maximum (45° dump) – horizontal arm ft in 6' 0" 6' 2" 5' 7" 5' 9" 5' 10" 6' 0" 6' 4" 6' 6" 5' 11" 6' 1" 6' 3" 6' 5" 7' 1" 7' 3" 6' 8" 6' 10" 7' 0" 7' 2" 7' 2" 7' 6" 7' 1" 7' 3" 7' 4" 7' 7"

Operating weight (includes 176 lb operator and full fuel tank) lbs 28074 28171 28074 28171 28744 28883 28702 28799 28799 28799 29321 29458 28631 28728 28631 28728 29302 29441 29260 29357 29357 29357 29879 30016

PO

M

N

R

Q

S

T

TIRE SIZE

427 HT Standard arms Hi Lift Arms in in

Tire size Manufacturer Type Rating Op weight lbs STL lbs FTTL lbs STL lbs FTTL lbs Vertical Width

20.5R25 Michelin XHA2 L3 0 0 0 0 0 0.0 0.0

20.5R25 Michelin XTLA L2 -265 -187 -161 -159 -137 -0.2 0.2

20.5R25 Michelin XSNOWPLUS L2 -185 -130 -112 -112 -95 -0.4 0.3

550/65R25 Michelin XLD L3 -185 -130 -112 -112 -95 -1.7 0.9

20.5R25 Michelin XLDD2A L5 1023 723 619 617 529 1.0 0.3

20.5R25 Michelin XMINED2 L5 1543 1091 935 933 798 1.2 1.1

620/75R26 Michelin MEGAXBIB -732 -518 -443 -379 115 2.0 1.7

750/65R26 Michelin MEGAXBIB -185 -130 -112 -95 137 2.4 10.3

20.5R25 Goodyear TL-3A+ L3 53 37 33 31 26 0.1 0.7

20.5R25 Goodyear RL-5K L5 1182 836 714 714 611 1.3 1.1

620/75R26 Goodyear DT824 -564 -399 -342 -342 -291 1.8 2.8

750/65R26 Goodyear DT820 79 57 49 49 42 2.7 11.7

20.5R25 JCB Earthmover L3 203 143 123 123 106 1.0 -0.2

20.5R25 Nokian Loadergrip L3 -450 -317 -271 -271 -231 0.5 -0.2

20.5-25 Goodyear SGL (12ply) L2 -538 -381 -326 -324 -278 -0.4 1.3

20.5-25 Goodyear HRL-3A (16ply) L3 -71 -51 -42 -42 -37 0.7 1.5

20.5-25 JCB Sitemaster (16 ply) L3 -344 -243 -207 -207 -179 -0.2 0.1

20.5-25 SG Revolution Solid Cushion SE 5079 3594 3073 3069 2624 -1.7 -0.2

20.5-25 SG Revolution Solid Cushion S2C2 DWL 4744 3355 2870 2866 2452 -1.7 -1.3

Optional extra counterweight (not available with solid cushion or foam filled tires) 838 1581 1307 1349 1116 - -

Heavy duty axles (required with 6 speed, solid/foam filled tires, 29.5" width agricultural tires and high lift arms) 728 93 79 79 68 - 3.9

Please note: if heavy duty axles are required and 3.9" width increase is not suitable (shovel width etc.) then narrow width wheel rims are available (standard height arms only)

SPECIFICATION 427/437 WHEELED LOADING SHOVEL

LOADER DIMENSIONS – 427 ZX

Assumes machine is fitted with 20.5 R25 Michelin XHA2 tires.

Model 427 ZX

Bucket mounting Direct Quickhitch

Bucket type General purpose Penetration General purpose General purpose

Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate

Bucket capacity (SAE heaped) yd3 2.62 2.62 2.49 2.75 3.14 3.53 2.35 2.62 2.49 2.75 3.14 3.53

Bucket capacity (struck) yd3 2.25 2.25 2.11 2.33 2.69 3.07 2.03 2.29 2.08 2.34 2.69 3.07

Bucket width ft in 8' 4" 8' 4" 8' 4" 8' 4" 8' 10" 8' 10" 8' 4" 8' 4" 8' 4" 8' 4" 8' 10" 8' 10"

Bucket weight lbs 2293 2513 2039 2293 2782 2930 1764 1874 1764 1874 2504 2670

Maximum material density lbs/ft 129 127 137 123 105 92 134 119 127 114 97 85

Tipping load straight lbs 21356 21107 21594 21356 20867 20719 19989 19773 19989 19773 19284 19136

Tipping load full turn lbs 18239 17988 18453 18239 17749 17602 17081 16885 17081 16885 16396 16248

Payload lbs 9118 8993 9226 9118 8874 8801 8541 8442 8541 8442 8197 8124

Maximum break out force lbf 30349 30349 32597 30349 29000 26977 28326 26527 28326 26527 25403 23830

M Dump angle maximum degrees 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45° 45°

N Roll back angle full height degrees 52° 52° 52° 52° 52° 52° 52° 52° 52° 52° 52° 52°

O Roll back at carry degrees 44° 44° 44° 44° 44° 44° 44° 44° 44° 44° 44° 44°

P Roll back at ground level degrees 35° 35° 35° 35° 35° 35° 35° 35° 35° 35° 35° 35°

Q Load over height ft in 12' 0" 11' 11" 11' 11" 11' 11" 11' 11" 11' 11" 12' 0" 12' 0" 11' 11" 11' 11" 11' 11" 11' 11"

R Dump height (45° dump) ft in 9' 2" 9' 2" 9' 9" 9' 7" 9' 5" 9' 3" 8' 11" 8' 10" 9' 4" 9' 2" 9' 1" 8' 10"

S Dig depth ft in 0' 1" 0' 1" 0' 1" 0' 1" 0' 1" 0' 1" 0' 1" 0' 1" 0' 1" 0' 1" 0' 1" 0' 4"

T Reach at dump height ft in 3' 8" 3' 8" 3' 1" 3' 3" 3' 5" 3' 7" 3' 11" 4' 1" 3' 6" 3' 8" 3' 9" 4' 0"

Reach maximum (45° dump) – horizontal arm ft in 6' 2" 6' 2" 5' 7" 5' 9" 5' 10" 6' 0" 6' 4" 6' 6" 5' 11" 6' 1" 6' 3" 6' 5"

Operating weight (includes 176 lb operator and full fuel tank) lbs 28777 29172 28704 28777 29333 29460 29496 29593 29593 29593 30115 30252

OP

R

Q

S

T

N

M

TIRE SIZE

427 ZX Standard arms in in

Tire size Manufacturer Type Rating Op weight lbs STL lbs FTTL lbs Vertical Width

20.5R25 Michelin XHA2 L3 0 0 0 0.0 0.0

20.5R25 Michelin XTLA L2 -265 -187 -161 -0.2 0.2

20.5R25 Michelin XSNOWPLUS L2 -185 -130 -112 -0.4 0.3

550/65R25 Michelin XLD L3 -185 -130 -112 -1.7 0.9

20.5R25 Michelin XLDD2A L5 1023 723 619 1.0 0.3

20.5R25 Michelin XMINED2 L5 1543 1091 935 1.2 1.1

620/75R26 Michelin MEGAXBIB -732 -518 -443 2.0 1.7

620/75R26 Michelin MEGAXBIB (HD AXLES) -4 -423 -364 2.0 5.6


20.5R25 Goodyear TL-3A+ L3 53 37 33 0.1 0.7

20.5R25 Goodyear RL-5K L5 1182 836 714 1.3 1.1

620/75R26 Goodyear DT824 -564 -399 -342 1.8 2.8

620/75R26 Goodyear DT824 (HD AXLES) 163 -306 -262 1.8 6.7

750/65R26 Goodyear DT820 79 57 49 2.7 11.7

20.5R25 JCB Earthmover L3 203 143 123 1.0 -0.2

20.5R25 Nokian Loadergrip L3 -450 -317 -271 0.5 -0.2

20.5-25 Goodyear SGL (12ply) L2 -538 -381 -326 -0.4 1.3

20.5-25 Goodyear HRL-3A (16ply) L3 -71 -51 -42 0.7 1.5

20.5-25 JCB Sitemaster (16 ply) L3 -344 -243 -207 -0.2 0.1

20.5-25 SG Revolution Solid Cushion SE 5079 3594 3073 -1.7 -0.2

20.5-25 SG Revolution Solid Cushion S2C2 DWL 4744 3355 2870 -1.7 -1.3

Optional extra counterweight (not available with solid cushion or foam filled tires) 838 1581 1307 - -

Heavy duty axles (required with 6 speed, solid/foam filled tires, 29.5” width agricultural tires and high lift arms) 728 93 79 - 3.9

Please note: if heavy duty axles are required and 3.9” width increase is not suitable (shovel width etc.) then narrow width wheel rims are available (standard height arms only)



TIRE SIZE

437 HT Standard arms HI LIFT Arms SHL Arms in in

Tire size Manufacturer Type Rating Op weight lbs

STL lbs

FTTL lbs

STL lbs

FTTL lbs

STL lbs

FTTL lbs Vertical Width

20.5 R25 Michelin XHA2 L3 0 0 0 0 0 0 0 0.0 0.0

20.5R25 Michelin XTLA L2 -179 -152 -146 -123 -123 -106 -11 -1.9 -0.2

20.5R25 Michelin XSNOWPLUS L2 -126 -106 -101 -86 -86 -73 -20 -1.3 -0.4

550/65R25 Michelin XLD L3 -126 -106 -101 -86 -86 -73 -97 -1.3 -1.7

20.5R25 Michelin XLDD2A L5 690 591 560 481 476 408 55 7.3 1.0

20.5R25 Michelin XMINED2 L5 1041 891 847 723 719 615 68 11.0 1.2

620/75R26 Michelin MEGAXBIB -494 -421 -401 -344 -340 -291 115 -5.2 2.0

750/65R26 Michelin MEGAXBIB -126 -106 -101 -86 -86 -73 137 -1.3 2.4

20.5 R25 Goodyear TL-3A+ L3 35 31 29 24 24 22 7 0.4 0.1

20.5 R25 Goodyear RL-5K L5 796 681 648 553 549 470 73 8.4 1.3

620/75R26 Goodyear DT824 -381 -326 -309 -265 -262 -225 101 -4.0 1.8

750/65R26 Goodyear DT820 53 46 44 37 37 31 150 0.6 2.7

20.5 R25 JCB Earthmover L3 137 117 110 95 95 82 55 1.5 1.0

20.5 R25 Nokian Loadergrip L3 -304 -260 -247 -212 -209 -179 26 -3.2 0.5

20.5-25 Goodyear SGL (12ply) L2 -280 -238 -227 -194 -192 -165 -20 -3.0 -0.4

20.5-25 Goodyear HRL-3A (16ply) L3 -49 -40 -40 -33 -33 -29 42 -0.5 0.7

20.5-25 JCB Sitemaster (16 ply) L3 -231 -198 -190 -161 -161 -137 -9 -2.4 -0.2

20.5-25 SG Revolution Solid Cushion SE 3424 2930 2784 2383 2363 2022 -95 36.1 -1.7

20.5-25 SG Revolution Solid Cushion S2C2 DWL 3199 2736 2601 2224 2207 1887 -95 33.7 -1.7

Optional extra counterweight (not available with solid cushion or foam filled tires) 838 1506 1246 1226 1014 1038 860 - -

PO

R

Q

S

M

N

T


Assumes the machine is fitted with Michelin 20.5R25 XHA (L3) tires.

Model 437 HT 437 HT HL 437 HT SHL

Bucket mounting Direct Quickhitch Direct Quickhitch Direct Quickhitch

Bucket type General purpose General purpose General purpose

Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate








Payload lbs 10558 10401 10558 10401 9930 9778 9930 9778 8023 7904 8023 7904 7546 7430 7546 7430 6535 6437 6535 6437 6146 6052 6146 6052


M Dump angle maximum degrees 45° 45° 45° 45° 50° 50° 50° 50° 50° 50° 50° 50° 0 degrees 45° 45° 45° 45° 50° 50° 50° 50° 50° 50°

N Roll back angle full height degrees 60° 60° 60° 60° 58° 58° 58° 58° 58° 58° 58° 58° 0 degrees 60° 60° 60° 60° 58° 58° 58° 58° 58° 58°

O Roll back at carry degrees 54° 54° 54° 54° 48° 48° 48° 48° 48° 48° 48° 48° 0 degrees 54° 54° 54° 54° 48° 48° 48° 48° 48° 48°

P Roll back at ground level degrees 45° 45° 45° 45° 43° 43° 43° 43° 43° 43° 43° 43° 0 degrees 45° 45° 45° 45° 43° 43° 43° 43° 43° 43°



S Dig depth ft in 0' 5" 0' 5" 0' 4" 0' 4" 0' 5" 0' 5" 0' 4" 0' 4" 0' 5" 0' 5" 0' 4" 0' 4" 0' 5" 0' 5" 0' 4" 0' 4" 0' 4" 0' 4" 0' 3" 0' 3" 0' 4" 0' 4" 0' 3" 0' 3"






Assumes the machine is fitted with Michelin 20.5R25 XHA (L3) tires.

Model 437 HT 437 HT HL 437 HT SHL

Bucket mounting Direct Quickhitch Direct Quickhitch Direct Quickhitch

Bucket type General purpose General purpose General purpose

Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate








Payload lbs 10558 10401 10558 10401 9930 9778 9930 9778 8023 7904 8023 7904 7546 7430 7546 7430 6535 6437 6535 6437 6146 6052 6146 6052


M Dump angle maximum degrees 45° 45° 45° 45° 50° 50° 50° 50° 50° 50° 50° 50° 0 degrees 45° 45° 45° 45° 50° 50° 50° 50° 50° 50°

N Roll back angle full height degrees 60° 60° 60° 60° 58° 58° 58° 58° 58° 58° 58° 58° 0 degrees 60° 60° 60° 60° 58° 58° 58° 58° 58° 58°

O Roll back at carry degrees 54° 54° 54° 54° 48° 48° 48° 48° 48° 48° 48° 48° 0 degrees 54° 54° 54° 54° 48° 48° 48° 48° 48° 48°

P Roll back at ground level degrees 45° 45° 45° 45° 43° 43° 43° 43° 43° 43° 43° 43° 0 degrees 45° 45° 45° 45° 43° 43° 43° 43° 43° 43°



S Dig depth ft in 0' 5" 0' 5" 0' 4" 0' 4" 0' 5" 0' 5" 0' 4" 0' 4" 0' 5" 0' 5" 0' 4" 0' 4" 0' 5" 0' 5" 0' 4" 0' 4" 0' 4" 0' 4" 0' 3" 0' 3" 0' 4" 0' 4" 0' 3" 0' 3"




LOADER DIMENSIONS – 437 ZX

Assumes the machine is fitted with Michelin 20.5R25 XHA (L3) tires

Model 437 ZX

Bucket mounting Direct Quickhitch

Bucket type General purpose Penetration General purpose General purpose

Bucket equipment Tipped teeth Reversible toeplate Tipped teeth Reversible toeplate

Bucket capacity (SAE heaped) yd3 3.01 3.40 3.40 3.14 3.53 3.01 3.40 3.14 3.53

Bucket capacity (struck) yd3 2.59 2.97 2.97 2.69 3.07 2.59 2.97 2.69 3.07

Bucket width ft in 9' 0" 9' 0" 9' 0" 8' 10" 8' 10" 9' 0" 9' 0" 8' 10" 8' 10"

Bucket weight lbs 2756 2903 3000 2782 2930 2478 2643 2504 2670

Maximum material density lbs/ft 125 109 109 119 105 119 104 113 100

Tipping load straight lbs 24377 24055 24147 24348 24026 23261 22937 23041 22902

Tipping load full turn lbs 20280 19994 20084 20249 19963 19352 19083 19167 19055

Payload lbs 10139 9998 10042 10124 9980 9676 9542 9583 9526

Maximum break out force lbf 39566 36419 36419 39566 36419 35295 32372 35295 32372

M Dump angle maximum degrees 47° 47° 47° 47° 47° 47° 47° 47° 47°

N Roll back angle full height degrees 58° 58° 58° 58° 58° 58° 58° 58° 58°

O Roll back at carry degrees 45° 45° 45° 45° 45° 45° 45° 45° 45°

P Roll back at ground level degrees 37° 37° 37° 37° 37° 37° 37° 37° 37°

Q Load over height ft in 12' 4" 12' 4" 12' 4" 12' 4" 12' 4" 12' 4" 12' 4" 12' 4" 12' 4"

R Dump height (45° dump) ft in 9' 3" 9' 1" 9' 1" 9' 9" 9' 4" 9' 0" 8' 9" 9' 5" 9' 0"

S Dig depth ft in 0' 5" 0' 5" 0' 5" 0' 4" 0' 4" 0' 5" 0' 5" 0' 4" 0' 4"

T Reach at dump height ft in 4' 1" 4' 4" 4' 4" 3' 9" 3' 7" 4' 4" 4' 7" 4' 0" 3' 11"

Reach maximum (45° dump) – horizontal arm ft in 6' 7" 6' 9" 6' 9" 6' 3" 6' 5" 6' 10" 7' 0" 6' 6" 6' 8"

Operating weight (includes 176 lb operator and full fuel tank) lbs 33632 33759 33907 33632 33759 33892 33795 33892 34414

OP

R

Q

S

T

N

M

TIRE SIZE

437 ZX Standard arms in in

Tire size Manufacturer Type Rating Op weight lbs STL lbs FTTL lbs Vertical Width

20.5R25 Michelin XHA2 L3 0 0 0 0.0 0.0

20.5R25 Michelin XTLA L2 -265 -179 -152 -0.2 0.2

20.5R25 Michelin XSNOWPLUS L2 -185 -126 -106 -0.4 0.3

550/65R25 Michelin XLD L3 -185 -126 -106 -1.7 0.9

20.5R25 Michelin XLDD2A L5 1023 690 591 1.0 0.3

20.5R25 Michelin XMINED2 L5 1543 1041 891 1.2 1.1



20.5R25 Goodyear TL-3A+ L3 53 35 31 0.1 0.7

20.5R25 Goodyear RL-5K L5 1182 796 681 1.3 1.1

620/75R26 Goodyear DT824 -564 -381 -326 1.8 2.8

750/65R26 Goodyear DT820 79 53 46 2.7 15.6

20.5R25 JCB Earthmover L3 203 137 117 1.0 -0.2

20.5R25 Nokian Loadergrip L3 -450 -304 -260 0.5 -0.2

20.5-25 Goodyear SGL (12ply) L2 -414 -280 238 -0.4 1.3

20.5-25 Goodyear HRL-3A (16ply) L3 -71 -49 -40 0.7 1.5

20.5-25 JCB Sitemaster (16 ply) L3 -344 -231 -198 -0.2 0.1

20.5-25 SG Revolution Solid Cushion SE 5079 3424 2930 -1.7 -0.2

20.5-25 SG Revolution Solid Cushion S2C2 DWL 4744 3199 2736 -1.7 -1.3

Optional extra counterweight (not available with solid cushion or foam filled tires) 838 1506 1246 - -


ENGINE – 427/437

427 437

Type 4 stroke direct injection 4 stroke direct injection

Model QSB6.7 QSB6.7

Capacity in3 408 408

Aspiration Turbo charged Turbo charged

Cylinders 6 6

Max gross power to SAE J1995/ISO 14396 hp @ 2200rpm 173 173

Rated gross power to SAE J1995/ISO 14396 hp @ 2200rpm 158 173

Nett power to SAE J1349/EEC 80/1269 hp @ 2200rpm 146 160

Max torque lbft @ 1500rpm 591 591

Emissions: US EPA Tier 4i

AXLES – 427/437

427

Type Open, limited slip or automatic differential locking

Make & model Standard fit ZF MT-L 3075 II (front) ZF MT-L 3065 II (rear)

Heavy duty ZF MT-L3085 II (front) ZF MT-L3065 II (rear)

Overall axle ratio 21.53:1

Rear axle oscillation 21° (standard), 18° (heavy duty)

Weight Front axle (standard) 1720 lb

Rear axle (standard) 1731 lb

Front axle (heavy duty) 2381 lb

Rear axle (heavy duty) 1731 lb

437

Type Open, limited slip or automatic differential locking

Make & model Standard fit ZF MT-L3085 II (front) ZF MT-L 3075 II (rear)

Overall axle ratio 20.184:1 (front) 20.365:1 (rear)

Rear axle oscillation 21°

Weight Front axle (standard) 2381 lb

Rear axle (standard) 1797 lb

Bias Ratio: Open differential: 12%, limited slip differential: 30%, open differential with locking front: 100%

TRANSMISSION – 427/437

4 wheel drive, automatic smooth shift transmission electrically operated selector and gear change incorporating a speed inhibitor and modulation for smooth, responsive on-the-move direction and ratio changes. Single stage integral torque converter. 4 forward and 3 reverse gears. Optional 5 speed with (LUC) lock-up torque converter available, 6 speed with lock-up torque converter available on 427 AGRI only.

Gearbox options

427 427 427 437 437

Gear (4WG160) 4 Speed

(5WG 160) 5 Speed + LUC


(4WG190) 4 Speed


1 mph 4.14 4.31 3.93 4.27 4.38

2 mph 8.06 7.69 6.11 7.97 7.95

3 mph 14.45 11.84 9.36 15.27 12.18

4 mph 23.56 17.68 14.41 23.54 18.82

5 mph - 24.85 21.54 - 24.85

6 mph - - 24.85 - -

STEERING Priority steer hydraulic system with emergency steering. Piston pump meters flow through steer valve @ (2756 psi) to provide smooth low effort response. Steering angle ± 40°. Steer rams located high in the chassis fabrication to provide protection from damage. Adjustable steering column.

BRAKES Hydraulic power braking on all wheels, operating pressure 870 psi. Dual circuit with accumulator back-up provide maximum safety under all conditions. Hub mounted, oil immersed, multi-plate disc brakes with organic brake linings are environmentally acceptable. Also available with sintered-linings for increased wear resistance, recommended in re-handling duties with extensive forward/reverse shuttling. Parking brake, mechanical type operating on transmission output shaft.

TIRES 20.5-25 SGL (L2), 20.5 R25 XTLA (L2), 20.5 R25 XSNOWPLUS (L2), 20.5 R25 LOADERGRIP (L2), 20.5-25 JCB SITEMASTER (L3), 20.5-25 HRL (L3), 20.5 R25 XHA2 (L3), 20.5 R25 RT-3B (L3) 20.5 R25 TL-3A (L3), 20.5 R25 EARTHMOVER (L3), 550/65 R25 XLD (L3), 20.5 R25 XLDD2A (L5T), 20.5 R25 XMINED2 (L5), 20.5 R25 RL-5K, 20.5-25 SG REVOLUTION SOLID CUSHION (DWL).

ELECTRICAL SYSTEM – 427/437

427 437

System voltage Volt 24 24

Alternator output Amp hour 70 70

Battery capacity Amp hour 2 x 110 2 x 110


LOADER HYDRAULICS – 427/437

427 437

Pump type Twin variable displacement piston pumps

Pump 1 max. flow gal/min 34.87 34.87

Pump 1 max. pressure psi 3626 3626

Pump 2 max. flow gal/min 34.87 34.87

Pump 2 max. pressure psi 2321 2321

Hydraulic cycle times at full engine revs Seconds

HT & ZX 437 HT

Arms raise (full bucket) 4.7 6.4

Bucket dump (full bucket) 1.8 2.3

Arms lower (empty bucket) 2.8 4.6

Total cycle 9.3 13.3

Ram dimensions Bore Rod Closed centers Stroke

427 437 427 437 427 437 427 437

Bucket ram x2 ft in 0' 5" 0' 6" 0' 3" 0' 3" 3' 7" 3' 11" 1' 9" 1' 9"

Lift ram x2 ft in 0' 4" 0' 5" 0' 2" 0' 3" 4' 2" 4' 2" 2' 8" 2' 8"

Steer ram x2 ft in 0' 3" 0' 3" 0' 2" 0' 2" 2' 0" 2' 0" 1' 0" 1' 0"

SERVICE FILL CAPACITIES – 427/437

427 ZX 437 ZX 427 HT 437 HT

Hydraulic system gallons 55.5 55.5 55.5 55.5

Fuel tank gallons 35 35 36 37

Engine oil sump gallons 4.8 4.8 4.8 4.8

Transmission oil system gallons 7.9 9.5 7.9 9.5

Axle oil (front) gallons 6 (9.2 HD axles) 9.2 6 (9.2 HD axles) 9.2

Axle oil (rear) gallons 6.1 6.1 6.1 6.1

Engine coolant system gallons 9.2 9.2 9.2 9.2

STANDARD EQUIPMENT 427/437

Loader: Bucket reset mechanism, loader arm kickout mechanism, loader control isolator, high breakout forces with excellent loading characteristics.Engine: Powercore air cleaner with scavenge system, silencer and exhaust stack with diesel oxidation catalyst, sedimenter, twin bowl fuel filters, fan guards. Isolated cooling package with hydraulically driven low speed cooling fan. Low idle speed of 700rpm, engine idle shutdown timer. ECO (Economy) mode.Transmission: Single lever shift control, speed inhibitor, neutral start, disconnect on footbrake and loader lever, disconnect isolator switch, direction changes and kickdown on gear selector and loader control lever. Single lever column shift control, speed inhibitor, neutral start, progressive intelligent clutch cut-off, direction changes and kickdown on column lever and loader controls.Axles: Epicyclic wheel hub reduction, fixed front, oscillating rear. Heavy Duty axles required on 427 with 6 speed, solid or foam filled tires and high lift arms.Hydraulics: Twin piston pumps with priority steer, emergency steer back-up, 2 spool loader circuit with accumulator support, 3rd spool auxiliary hydraulic circuit as option.Steering: Adjustable steering column, “soft feel” steering wheel 5 turns lock to lock, resilient stops on max lock.Cab: ROPS/FOPS safety structure, interior reading light, center mounted master warning light. Electronic monitoring panel with LCD message display. Two speed intermittent front windscreen wipe/wash and self park, single speed rear windscreen wipe/wash and self park. 3 speed heater/demisting with replaceable air filter, LH and RH opening windows, sun visor, internal rear view mirror, external mirrors, adjustable suspension seat with belt and headrest, operator storage facilities, laminated windscreen, heated rear screen, loader control isolator, horn, adjustable armrest.Electrical: Road lights front and rear, parking lights, front and rear working lights, reverse alarm and light, rear fog light, battery isolator, radio wiring and speakers, 70 amp alternator, rotating beacon.Bodywork: Front and rear fenders, side and rear access panels, flexible bottom step, full width rear counterweight, recovery lugs, lifting lugs.

WASTEMASTER STANDARD EQUIPMENT 427/437

427: Machine as above including belly guarding, carbon cab air filter, front and rear light guards, front and side screen guards, full Wastemaster branding.437: As 427 with additional front chassis belly guard, lift ram hose guarding and front axle guard.

OPTIONAL EQUIPMENT 427

Air conditioning, automatic temperature control option, Open, limited slip differentials front/rear, or automatic differential locking axles, Sinter lined brake pads also available for extended life, Turbo 2 pre-cleaner, tooth guard, replaceable bucket wearparts, epoxy coated radiator/coolers, automatically reversing cooling fan, smooth ride system (SRS), hydraulic quickhitch, full rear fenders, reversing camera (colour), additional front and rear worklights, auto greasing system, joystick or multi-lever hydraulic controls, auxiliary hydraulic control on separate lever or joystick mounted (proportional), smart reverse alarm, white noise (BBS) reverse alarm, canopy cab, Wastemaster cab, Livelink telematics, widecore radiator, sealed electrics, grease gun and cartridge, belly guard kit, ARV kit, safety strut, transmission cooler bypass, non-heated mirrors, 24V to 12V in cab converter, cab screen guards, additional front and rear work lights, vinyl seat, air suspension seat with or without heating, Grammer Actimo XXL deluxe seat, extra counterweight, light guards, front and rear blinds, engine block heater, biodegradable hydraulic oil, cab filtration options, fire extinguisher, number plate light kit, auxiliary 4th spool hydraulic service, rear fender grab rails, red and white chevrons, rear hinged guard protection.

OPTIONAL EQUIPMENT 437

Air conditioning, automatic temperature control option, Open, limited slip differentials front/rear, or automatic differential locking axles, Sinter lined brake pads also available for extended life, Turbo 2 pre-cleaner, tooth guard, replaceable bucket wearparts, epoxy coated radiator/coolers, automatically reversing cooling fan, smooth ride system (SRS), hydraulic quickhitch, full rear fenders, reversing camera (colour), additional front and rear worklights, auto greasing system, joystick or multi-lever hydraulic controls, auxiliary hydraulic control on separate lever or joystick mounted (proportional), smart reverse alarm, white noise (BBS) reverse alarm, canopy cab, Wastemaster cab, Livelink telematics, widecore radiator, sealed electrics, grease gun and cartridge, Wastemaster belly guard kit, ARV kit, safety strut, transmission cooler bypass, non-heated mirrors, 24V to 12V in cab converter, cab screen guards, additional front and rear work lights, vinyl seat, air suspension seat with or without heating, Grammer Actimo XXL deluxe seat, extra counterweight, light guards, front and rear blinds, engine block heater, biodegradable hydraulic oil, cab filtration options, fire extinguisher, number plate light kit, auxiliary 4th spool hydraulic service, rear fender grab rails, red and white chevrons, rear hinged guard protection.


Assumes the fitment of Michelin 20.5R25 XHA (L3) tires Parallel fork Non parallel fork Parallel fork Non parallel fork

427 HT 437 HT 427 HT 437 HT 427 HT HL 437 HT HL 437 HT SHL 427 HT HL 437 HT HL 437 HT SHL

Fork carriage width ft in 4' 11" 4' 11" 4' 11" 4' 11" 4' 11" 4' 11" 4' 11" 4' 11" 4' 11" 4' 11"

Length of tines ft in 4' 0" 4' 0" 4' 0" 4' 0" 4' 0" 4' 0" 4' 0" 4' 0" 4' 0" 4' 0"

A Reach at ground level ft in 2' 6" 2' 7" 2' 6" 2' 7" 3' 10" 3' 9" 6' 7" 3' 11" 3' 9" 6' 8"

B Reach at arms horizontal ft in 5' 1" 5' 4" 5' 1" 5' 4" 6' 3" 6' 11" 8' 5" 6' 3" 6' 11" 8' 6"

C Below ground level ft in -1' 10" 0' 0" -1' 11" 0' 1" 0' 0" 0' 0" -1' 11" 0' 1" 0' 0" 0' 0"

D Arms, horizontal height ft in 6' 3" 6' 5" 6' 2" 6' 4" 6' 3" 6' 5" 6' 5" 6' 2" 6' 4" 6' 4"

E Arms, maximum height ft in 12' 2" 12' 7" 12' 1" 12' 6" 14' 8" 14' 8" 16' 7" 13' 6" 14' 8" 16' 6"

F Reach at maximum height ft in 2' 7" 2' 10" 2' 7" 2' 10" 3' 2" 2' 10" 2' 11" 2' 10" 2' 10" 2' 11"

Payload* lbs 11023 11023 11023 11023 9960 10251 7934 9960 10251 7934

Tipping load straight lbs 16691 18936 16691 18936 14522 14950 11967 14522 15148 11967

Tipping load full turn (40°) lbs 14312 16021 14312 16021 12452 12815 9919 12452 12815 9919

Attachment weight lbs 970 1063 970 1063 970 1063 970 970 1063 970

*At the center-of-gravity distance 20" .Based on 80% of full turn tipping load as defined by ISO 8313.

Manual fork spacings at 2" increments. Fork section 4 x 2".

LOADER DIMENSIONS – FORK FRAME WITH FORKS – STANDARD HEIGHT ARM / HiLift ARM / SUPER HiLift ARM

A

BC

D

E

F


BUCKET SELECTOR – STANDARD HEIGHT ARM / HiLift ARM / SUPER HiLift ARM

Material Loose density (lb/ft³) Fill factor (%)

Snow (fresh) 12.5 110

Peat (dry) 25.0 100

Sugar beet 33.1 100

Coke (loose) 35.6 85

Barley 37.5 85

Petroleum coke 42.5 85

Wheat 45.6 85

Coal bitumous 47.8 100

Fertilizer (mixed) 64.3 85

Coal anthracite 65.3 100

Earth (dry) (loose) 71.8 100

Nitrate fertilizer 78.0 85

Sodium chloride (dry) (salt) 81.2 85

Cement Portland 89.9 100

Limestone (crushed) 95.5 100

Sand (dry) 96.8 100

Asphalt 99.9 100

Gravel (dry) 103.0 85

Clay (wet) 104.9 110

Sand (wet) 118.0 110

Fire clay 129.9 100

Copper (concentrate) 143.6 85

Slate 174.8 100

Magnetite 200.0 100

LOADER DIMENSIONS – FORK FRAME WITH FORKS

Assumes the fitment of Michelin 20.5R25 XHA (L3) tires

427 ZX 437 ZX

Fork carriage width ft in 4' 11" 4' 11"

Length of tines ft in 4' 0" 4' 0"

A Reach at ground level ft in 2' 6" 2' 7"

B Reach at arms horizontal ft in 5' 1" 5' 4"

C Below ground level ft in -1' 10" 0' 1"

D Arms, horizontal height ft in 6' 2" 6' 4"

E Arms, maximum height ft in 12' 1" 12' 6"

F Reach at maximum height ft in 2' 7" 2' 10"

Payload* lbs 11023 11023

Tipping load straight lbs 17024 18274

Tipping load full turn (40°) lbs 14495 15461

Attachment weight lbs 970 1063

*At the center-of-gravity distance 500mm. Based on 80% of full turn tipping load as defined by ISO 8313.

Manual fork spacings at 50mm increments. Fork section 100mm x 50mm.

A

BC

D

E

F


Buck

et c

apac

ity (f

t3 ) 78

74

71

67

64

75 87 100 112 125 137

Material density (lb/ft3)

427 HT - HiLiFT ARM

Buck

et c

apac

ity (f

t3 )

Buck

et c

apac

ity (f

t3 )

88

85

81

78

74

74

71

67

64

60

75 87 100 112 125 137


75 87 100 112 125 137


437 HT - HiLiFT ARM

437 HT - SUPER HiLiFT ARM

Buck

et c

apac

ity (f

t3 ) 88

85

81

78

74

75 87 100 112 125 137


427 ZX - STANDARD HEIGHT ARM

Buck

et c

apac

ity (f

t3 ) 99

95

92

88

85

75 87 100 112 125 137


437 ZX - STANDARD HEIGHT ARM

Buck

et c

apac

ity (f

t3 ) 88

85

81

78

74

75 87 100 112 125 137


427 HT - STANDARD HEIGHT ARM

100%

110% 95%

Bucket fill factors

100%

110% 95%

Bucket fill factors

100%

110% 95%

Bucket fill factors

100%

110% 95%

Bucket fill factors

100%

110% 95%

Bucket fill factors

100%

110% 95%

Bucket fill factors

100%

110% 95%

Bucket fill factors

Buck

et c

apac

ity (f

t3 ) 99

95

92

88

85

75 87 100 112 125 137


437 HT - STANDARD HEIGHT ARM

BUCKET FILL FACTORS – STANDARD HEIGHT ARM BUCKET SELECTOR – HiLift ARM / SUPER HiLift ARM

Wheeled Loading Shovel 427/437427 – Operating weight: 28777lbs Gross rated power: 158hp Full turn tipping load: 17749lbs Standard shovel capacity: 3.1yd³437 – Operating weight: 33631lbs Gross rated power: 173hp Full turn tipping load: 19963lbs Standard shovel capacity: 3.5yd³

Your nearest JCB dealer

9999/5682 en-US 09/14 Issue 1

JCB North American – Headquarters Savannah. 2000 Bamford Blvd., Savannah, Georgia, 31322 Tel: (912) 447-2000 Download the very latest information on this product range at www.jcb.com

facebook.com/JCBAg @JCBAgriculture JCBAgriculture youtube.com/JCBAgriculture

©2009 JCB Sales. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any other means, electronic, mechanical, photocopying or otherwise, without prior permission from JCB Sales. All references in this publication to operating weights, sizes, capacities and other performance measurements are provided for guidance only and may vary dependant upon the exact specification of machine. They should not therefore be relied upon in relation to suitability for a particular application. Guidance and advice should always be sought from your JCB Dealer.”JCB reserves the right to change specifications without notice. Illustrations and specifications shown may include optional equipment and accessories. The JCB logo is a registered trademark of J C Bamford Excavators Ltd.

ONE COMPANY, OVER 300 MACHINES.

WHEELED LOADING SHOVEL | 427/437

Documents

Transcript of WHEELED LOADING SHOVEL | 427/437