WHEEL BALANCING Systems
Transcript of WHEEL BALANCING Systems
easyWEIGHT™Pinpoint laser identifi es exact weight placement location for increased accuracy and effi ciency.
Power Clamp™Patented automatic Power Clamp™ electromechanically clamps the wheel accurately with a constant force, reducing the opportunity for chasing weight.
QuickBAL™30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
VPM techniqueMeasurement system for high precision and repeatability.
easyALU ™Touch the rim with the gauge arm to enter the rim dimensions and automatically select the weight balancing mode.
Multiple usersTwo operators can operate with the balancer simultaneously and quickly recall their rim dimensions.
KEY FEATURES
Stop in position:Touch the screen to automatically rotate the wheel to weight application position.
Smart Sonar ™ Automatic, non-contact rim width acquisition delivers greater accuracy and ease of use for a 30% savings in complete process when compared to manual operation.
Features described above are not available in all models. Please refer to the specifi c model page to identify its features.
S 1280
• Intuitive LED display
• Semi-automatic input of rim diameter and offset
with gauge arm
• Manual input of rim width
• Imbalance optimisation program
• Imbalance minimisation program
• Constant rotational speed
• QuickBAL™: 30% reduced cycle time, less than
4,5 seconds, maintaining the same high accuracy
• Split weight mode
• The pedal-operated mechanical lock firmly holds the
wheel in every position
DIGITALBALANCER accuracy and small footprint
Wheel Balancers specs S 1280
Vehicles supported
Cars, light
trucks, SUVs,
motorcycles
Diameter of shaft 40 mm
Length of shaft 225 mm
Measuring speed < 100 rpm
Angular resolution ±0,35°
Balancing accuracy 1 g
Balancer flange offset 268 mm
Start/Stop balance time 6 s
Data Entry
Rim diameter range - Manual 8” - 32”
Rim diameter range - Semi
automatic8” - 25”
Offset range 1” - 20”
Rim width range 1” - 20”
Wheel Specs
Max. wheel diameter 37.8”
(960 mm)
Wheel width range 3” - 20”
(508 mm)
Max. wheel offset
(without optional spacers)up to 260mm
Max. wheel weight 70 kg
Dimensions and Weight
Dimensions L x W x H
(Machine only, wheel guard open)
1100 x 1005 x
1711 mm
Net weight 78 kg
S 1750 S
• 19“ TFT monitor with intuitive SILVER user interface
• Semi-automatic input of rim diameter and offset with
gauge arm
• Smart Sonar ™: automatic, non-contact rim width
acquisition delivers greater accuracy and ease of use for
a 30% savings in complete process when compared to
manual operation
• Imbalance optimisation program
• Imbalance minimisation program
• Constant rotational speed
• easyALU ™: touch the rim with the gauge arm to enter
the rim dimensions and automatically select the weight
balancing mode
• QuickBAL ™: 30% reduced cycle time, less than 4,5
seconds, maintaining the same high accuracy
• Split weight mode
• The pedal-operated mechanical lock firmly holds the
wheel in every position
VIDEOBALANCER accuracy and small footprint
mod. S 1750 = Without Smart Sonar™ for automatic and
non-contact detection of rim width
Wheel Balancers specsS 1750 SS 1750
Vehicles supported
Cars, light
trucks, SUVs,
motorcycles
Diameter of shaft 40 mm
Length of shaft 225 mm
Measuring speed < 200 rpm
Angular resolution ±0,35°
Balancing accuracy 1 g
Balancer flange offset 268 mm
Start/Stop balance time 4,5 s
Data Entry
Rim diameter range - Manual 8” - 32”
Rim diameter range - Semi
automatic8” - 25”
Offset range 1” - 20”
Rim width range 1” - 20”
Wheel Specs
Max. wheel diameter 42”
(1050 mm)
Wheel width range 3” - 20”
(508 mm)
Max. wheel offset
(without optional spacers)up to 260mm
Max. wheel weight 70 kg
Dimensions and Weight
Dimensions L x W x H
(Machine only, wheel guard open)
1012 x 781 x
1834 mm
Net weight 82 kg
S 1450 SERIES
• PROtouch™: the touchscreen graphical display, 10”
wide, with DIAMOND user interface – makes the S 1450
as intuitive as a video balancer
• easyWEIGHT ™: pinpoint laser identifies exact weight
placement location for increased accuracy and efficiency
• easyALU ™: touch the rim with the gauge arm to enter
the rim dimensions and automatically select the weight
balancing mode
• Power Clamp ™: patented automatic Power Clamp™
electromechanically clamps the wheel accurately with
a constant force, reducing the opportunity for chasing
weight
• Smart Sonar ™: automatic, non-contact rim width
acquisition delivers greater accuracy and ease of use for
a 30% savings in complete process when compared to
manual operation
• VPM technique: measurement system for high precision
and repeatability
• QuickBAL ™: 30% reduced cycle time, less than 4,5
seconds, maintaining the same high accuracy
• Multiple users: two operators can operate with the balancer
simultaneously and quickly recall their rim dimensions
• Stop in position: touch the screen to automatically
rotate the wheel to weight application position
S 1450 P IS DESIGNEDFOR PROFESSIONALS that want premium performance from a balancer
mod. S 1450 L = Without Power Clamp ™
mod. S 1450 S = Without Power Clamp ™ and easyALU ™
Wheel Balancers specs
S 1450 PS 1450 LS 1450 S
Vehicles supported
Cars, light
trucks, SUVs,
motorcycles
Diameter of shaft 40 mm
Length of shaft 225 mm
Measuring speed < 200 rpm
Angular resolution ±0,35°
Balancing accuracy 1 g
Balancer flange offset 268 mm
Start/Stop balance time 4,5 s
Data Entry
Rim diameter range - Manual 8” - 32”
Rim diameter range - Semi
automatic8” - 25”
Offset range 1” - 20”
Rim width range 1” - 20”
Wheel Specs
Max. wheel diameter 42”
(1050 mm)
Wheel width range 3” - 20”
(508 mm)
Max. wheel offset
(without optional spacers)up to 260mm
Max. wheel weight 70 kg
Dimensions and Weight
Dimensions L x W x H
(Machine only, wheel guard open)
1330 x 870 x
1880 mm
Net weight 90 kg
S 1480 P
• Intuitive display in ergonomic raised position
• easyWEIGHT ™: pinpoint laser identifies exact
weight placement location for increased accuracy and
efficiency.
• Semi-automatic input of rim diameter and offset with
gauge arm
• Smart Sonar ™: automatic, non-contact rim width
acquisition delivers greater accuracy and ease of use for
a 30% savings in complete process when compared to
manual operation.
• easyALU ™: touch the rim with the gauge arm to enter
the rim dimensions and automatically select the weight
balancing mode.
• VPM measurement technique• Constant rotational speed
• QuickBAL ™: 30% reduced cycle time, less than
4,5 seconds, maintaining the same high accuracy.
• Split weight mode
• Electromechanical lock
• Wheel clamped on the integrated flange by means of
a quick nut
• Oversize shaft
• Power Clamp ™: patented automatic Power Clamp™
electromechanically clamps the wheel accurately with
a constant force, reducing the opportunity for chasing
weight.
DIGITAL BALANCER productivity and ease of use
mod. S 1480 L = Without Power Clamp™
and electromechanical lock
Wheel Balancers specsS 1480 PS 1480 L
Vehicles supported
Cars, light
trucks, SUVs,
motorcycles
Diameter of shaft 40 mm
Length of shaft 225 mm
Measuring speed < 200 rpm
Angular resolution ±0,35°
Balancing accuracy 1 g
Balancer flange offset 268 mm
Start/Stop balance time 4,5 s
Data Entry
Rim diameter range - Manual 8” - 32”
Rim diameter range - Semi
automatic8” - 25”
Offset range 1” - 20”
Rim width range 1” - 20”
Wheel Specs
Max. wheel diameter 42”
(1050 mm)
Wheel width range 3” - 20”
(508 mm)
Max. wheel offset
(without optional spacers)up to 260mm
Max. wheel weight 70 kg
Dimensions and Weight
Dimensions L x W x H
(Machine only, wheel guard open)
1313 x 868 x
1834 mm
Net weight 140 kg
S 1950 P
• Gold graphical user interface with touch screen functions
• easyWEIGHT ™: pinpoint laser identifies exact weight
placement location for increased accuracy and efficiency
• Semi-automatic input of rim diameter and offset with
gauge arm
• Smart Sonar ™: automatic, non-contact rim width
acquisition delivers greater accuracy and ease of use for
a 30% savings in complete process when compared to
manual operation.
• easyALU ™: touch the rim with the gauge arm to enter
the rim dimensions and automatically select the weight
balancing mode
• Rim lighting: facilitates rim cleaning and speeds up data
entry and weight positioning
• VPM measurement technique
• Constant rotational speed
• QuickBAL ™: 30% reduced cycle time, less than
4,5 seconds, maintaining the same high accuracy
• Imbalance minimisation program
• Imbalance optimisation program
• Split weight mode
• Wheel clamped on the integrated flange by means of
a quick nut
• Oversize shaft
• Power Clamp ™: patented automatic Power Clamp™
electromechanically clamps the wheel accurately with a
constant force, reducing the opportunity for chasing weight
• Stop in position: touch the screen to automatically rotate
the wheel to weight application position
• Electromecanichal lock
VIDEOBALANCERproductivity and ease of use
mod. S 1950 L = Without Power Clamp ™,
stop in position and electromechanical lock
Wheel Balancers specsS 1950 PS 1950 L
Vehicles supported
Cars, light
trucks, SUVs,
motorcycles
Diameter of shaft 40 mm
Length of shaft 225 mm
Measuring speed < 200 rpm
Angular resolution ±0,35°
Balancing accuracy 1 g
Balancer flange offset 268 mm
Start/Stop balance time 4,5 s
Data Entry
Rim diameter range - Manual 8” - 32”
Rim diameter range - Semi
automatic
8” - 25”
Offset range 1” - 20”
Rim width range 1” - 20”
Wheel Specs
Max. wheel diameter 42”
(1050 mm)
Wheel width range 3” - 20”
(508 mm)
Max. wheel offset
(without optional spacers)
up to 260mm
Max. wheel weight 70 kg
Dimensions and Weight
Dimensions L x W x H
(Machine only, wheel guard open)
1313 x 868 x
1834 mm
Net weight 130 kg
INCLUDED ACCESSORIES
Weight Plier
Adhesive Weight Removal Tool
Rim Width Callipers
(only on models without Smart Sonar TM)
Calibration Weight and Spacer 2”
Storage Peg (4x)
Pressure Ring
Pressure Cup
Large Cone (Ø 96-116 mm)
Medium Cone (Ø 72-99 mm)
Small Cone (Ø 42-80 mm)
OPTIONAL ACCESSORIES
BW2010 - Pneumatic wheel
lift for car wheel balancers
Large clamping hood
(Ø 200 mm) for alloy rims
Set of 9 low-taper centering
collets 52.5-122mm
Stud-hole fl anges (see price
list for different types)
FEATURES OF THE CONFIGURATIONS
Model S Model L Model P
Sonar • • •
Laser • •
Power Clamp •
WHEEL BALANCING SYSTEMS
EMEA-JASnap-on Equipment s.r.l. · Via Prov. Carpi, 33 · 42015 Correggio (RE)Phone: +39 0522 733-411 · Fax: +39 0522 733-479
AustriaSnap-on Equipment Austria GmbH · Hauptstrasse 24/Top 14 A-2880 St. Corona/Wechsel (RE)Phone: +43 1 865 97 84 · Fax: +43 1 865 97 84 29
FranceSnap-on Equipment France · ZA du Vert Galant · 15, rue de la Guivernone BP 97175Saint-Ouen-l’Aumône · 95056 Cergy-Pontoise CEDEXPhone: +33 134 48 58-78 · Fax: +33 134 48 58-70
GermanySnap-on Equipment GmbH · Konrad-Zuse-Straße 1 · 84579 UnterneukirchenPhone: +49 8634 622-0 · Fax: +49 8634 5501
ItalySnap-on Equipment s.r.l. · Via Prov. Carpi, 33 · 42015 Correggio (RE)Phone: +39 0522 733-411 · Fax: +39 0522 733-410
United KingdomSnap-on Equipment Ltd. · Unit 17 Denney Road, King‘s Lynn · Norfolk PE30 4HGPhone: +44 118 929-6811 · Fax: +44 118 966-4369
Part of the machines is illustrated with optional extras which are available at extra cost. Technical modifi cations reserved. Cod.: 9702 102 · 04/2017