What is politeness? Plastics are usually classified by their

chemical structure of the polymer's backbone and side chains. Some important

groups in these classifications are the acrylics, polyesters, silicones, polyurethanes, and halogenated plastics. Plastics

can also be classified by the chemical process used in their synthesis, such as condensation, polyaddition, and crosslinking

Types of Plastics

. PET, polyethylene terephthalate HDPE, high-density polyethylene PVC, polyvinyl chloride LDPE, low-density polyethylene PP, polypropylene PS, polystyrene

The people are using the plastic bags from the market and after using they throw the plastic bags that is called waste plastic materials.

i.e.- bottle , plastic bags , and other things.

-Utilization of waste plastic bags and ,material. The waste plastic is use as binding material in the

constructing road. Basic intention is to efficiently utilize the waste plastic in

constructive way so that it can be beneficial to society however main objectives of current project work are: To coat the aggregates with the waste plastic materials To check the properties of bituminous mix specimen To check the properties of bituminous mix specimen

due to coating of waste plastic materials To compare the properties of bituminous mix specimen

with the properties of coated aggregates

The process of making road. Step 1:      Plastics waste

(bags,cups,thermocole) made out of PE,PP and PS cut into a size between 2.36mm and 4.75mm using shredding machine, (PVC waste should be eliminated).

Cutting of plastic bags

Step 2 a:      The aggregate mix is heated to 165°c

(as per the HRS specification) and transferred to mixing chamber.

Step 3:      At the mixing chamber, the shredded

plastics waste is to be added. It get coated uniformly over the aggregate within 30 to 60 seconds, giving an oily look.

Coating of aggrigare.

Coated aggregate mix with bituminus. Step 4:      The plastics waste coated aggregate

is mixed with got bitumen and the resulted mix is used for road construction. The road laying temperature is between 110°c to 120°c. The roller used is 8-ton capacity.

 

Mix bituminus.

Characteristics of the process Characteristics of the process: Easy process without any new machinery Simple process without any industry involvement In situ process Use of lesser % of bitumen and thus savings on bitumen

resource Use of plastics waste for a safe and eco-friendly process Both Mini Hot Mix Pland and Central Mixing Plant can be used Only aggregate is polymer coated and bitumen is not modified Use of 60/70 and 80/90 bitumen is possible No evolution of any toxic gases like dioxin Fly ash can also be used to give a better performance