HYSTER H280XL 28,000LB FORKLIFT(2) GFS DUST COLLECTOR MODULES

IIDA 8 HEAD MOULDERTURNER 42’’ TWIN BAND RESAW

LONG LENGTH DOUBLE 5 ARM LUMBER STACKERS STACKER INFEEDLONG LENGTH 35’ TRIM TABLE

FLYING CUT-OFF SAWCOE RF HEAT TUNNEL CONTROLCOE 48’ RF HEAT TUNNEL

WESTERN FINGER JOINTER FINGER JOINTER BLACK TRANSFER CROWDER HPU

WESTERN FINGER JOINTERFJ 3 ARM TILT HOISTFJ INFEED ROLLSTOYOTA 9,000LB FORKLIFT

CLARK 8,000LB FORKLIFT

HYSTER 15,000LB FORKLIFT

HYSTER H180H 18,000LB FORKLIFT

SELLICK SD120 12000LB FORKLIFT

(44) BLOCK BINSFINGER JOINTER LINE

INDUSTRIAL BLOCK TRANSFER FINGER JOINTER LINE

1 OF 2 PRECISION CHOP SAWSMID-OREGON BLOCK BIN TILT DUMP

OGAM MULTI-RIP SAWBLOCK SYSTEM

T. 604-530-9351E. info@tradewestsales.comwww.tradewestsales.com

FORKLIFTS

THURSDAY, APRIL 14th - 10 AMPlace: 6550 Unsworth rd., Chilliwack, BC

Preview: Wednesday, April 13th - 9 am - 4 pm

TERMS OF SALE Payment: Full payment day of sale by wire transfer, cash, Debit, Visa, Mastercard or company cheque accompanied by bank letter unconditionally guaranteeing payment on presentation. Maximum $5,000.00 payment by credit card. Full payment by cleared funds must be made before removal of items purchased. Buyer’s Premiums will be added to all invoices as follows: On-site bidders – 15%; On-line bidders: 18%. All items in auction are subject to additions, deletions and prior sale. Majors Removal: All items must be removed from sale site by 12 Noon, Friday, April 29th, 2016.All items are sold “as is – where is”, with all faults. While quantities and descriptions are believed to be accurate, the auctioneer, owner, employees or counsel make no warranties or guarantees either expressed or implied as to the authenticity, genuineness of, or defects in any lot, and will not be held responsible for any advertising discrepancies or inaccuracies. No warranties whatsoever are made as to condition, merchantability or fitness for any use of any item. Please take advantage of our preview and inspection period.

LUMBER REMANUFACTURING & FINGER JOINT PLANT

Machinery & Production lines not required for ongoing operations ofAUCTION!

Another Auction With Integrity ByAnother Auction With Integrity By

N

Gillwood Mfg.

LONG LENGTH FINGER JOINTER SYSTEM

From Hwy 1, take Lickman Rd. Exit south, then left on S. Sumas and left again on Unsworth Rd. Auction site is on right.

T. 604-530-9351E. info@tradewestsales.comwww.tradewestsales.com

INDUSTRIAL FINGER JOINTER SYSTEMOffered by Auction as Complete Package - High Bid Subject to Owner Approval

Offered for Sale as Package by Immediate Private Sale

SAFTRONICS STARTERSAFTRONICS EZ6240HD SOFT START2 OF 3 SAFTRONICS EZ-START SS STARTERSSCHUTTE HAMMER HOGGARDNER DENVER 50HP SCREW COMPRESSOR2012 ATLAS COPCO FX10 AIR DRYER

200HP X 72’’ BLOWER

4’ X 13’ SCISSOR LIFT

36’’ X 28’ SORT BELT

14’ X 18’ 7 BELT TRANSFER

PRECISION 18M RH CHOP SAW

PRECISION 18M LH CHOP SAW

PACKAGE BREAKDOWN TRANSFER

18’W X 7’L TRAVERSE INFEED TRANSFERRESAW OUTFEED TRANSFERPACKAGE BREAKDOWN & TILT HOIST1 OF 2 VONNEGUT 5 HEAD MOULDERSTIMESAVERS 4’ X 14’ ANGLE ROLL INFEED TRANSFERTIMESAVERS 14-220 MOULDER-SANDER (2)

BAKER HORIZONTAL RESAW

Listing subject to prior sales, additions and deletions without notice.

RESAW LINETurner Twin Band Resaw, S/N R709, 42”, Setworks, Twin 40HP Drives ● 20’ W X 7’ 6 Strand Camelback Plastic Infeed ● 15’ W Scissor Lift Tilt Hoist ● 20’ W X 9’ 8 Strand Camelback Landing Deck ● 18’ Infeed Rollcase To Resaw, w/ line bar ● 20’ Stick Belt ● Feed Rolls VFD ● Spare Resaw Drive ● Resaw Electrics ● 27’ X 24” Outfeed Rollcase ● Resaw Line Electrics ● Outfeed Rolls VFD ● 15’ W X 21’ 6 strand Outfeed Transfer, Roller Chain ● (6) Spare Resaw Blades ● (3) 24’ Lumber Roll Offs ● (2) 10HP Hydraulic Power Units ● Baker resaw: Baker horizontal resaw, 480V, 20 HP, hydraulic feed, return rolls

MOULDERS & CHOP LINESMoulder Line 1: Iida 8 Head Moulder, 5” X 10”; chromed, w/ brake ● 15’ X 9 5 Strand Package Infeed ● 12’ W Hydraulic Scissor Lift w/ Skate Rolls ● 18’ W X 7’ Infeed, Plastic Chain, w/ (7) 41” Spiral Rolls ● 5HP Hydraulic Power Unit, w/ Hold Down Feed Rolls ● 12” X 6’ Outfeed Belt ● 11” X 24’ Outfeed Belt ● 18’ W X 12’ 6 Belt Transfer n ● Moulder Tooling ● Spare Moulder Parts & Rolls •

Moulder Line 2: Vonnegut 5 Head Moulder; 4” X 8”; S/N 6398; Drives inc. (2) 40HP; Chromed, Brake Panel ● 15’ W X 9’ 3 Skate Roll Infeed On Tracks ● 4’ X 13’ Scissor Lift ● (2) Soft Start Panels ● 8” X 24’ Outfeed Belt

Moulder Line 3: Vonnegut 5 Head Moulder, 4” X 8”; Chromed, w/ brake ● (3) 4’ Skate Rolls To 3’ X 9’ Scissor Lift, w/ Skate Rolls ● (2) Roller Stands ● 5HP Gimble Saw, 16” w/ 12” X 9’ Incline Waste Belt ● Moulder Controls ● 8” X 32 Outfeed Belt

MOULDER/SANDER/BUFFER: Timesavers 14-220 Moulder/Sander/Buffer System; Enclosed Single Side Moulder Station; (3) In-line belt sanding stations; Rotary buffer station; Control panel, Model C8-16U; Pfannenberg control cooling unit; c/w Timesavers 4’ x 14’ angled power infeed rollcase; 460V; s/n 1200407/100904 ● Weinig U17AL 5 Head Moulder, Push Feed ● Wadkin FD 2102 5 Head Moulder, 4 X 8, Jointed, Chromed ● Note: Located off site in Richmond, BC, approx. 90 minutes from auction site near Vancouver Int. Airport. To be sold from photos during auction. Available for sale prior to auction.

CHOP LINESMoulder Chop Line 1: Precision 18M LH Mechanical Chop Saw ● Precision 18M RH Mechanical Chop Saw ● Infeed & Outfeed Rolls ● Twin 7” X 18’ Chop Outfeed Belts ● 14’ W X 18’ 7 Belt X 6” Outfeed Transfer ● 36” X 28’ Sorting Belt

Moulder Chop Line 2: Precision 18m LH Popup Saw ● Precision 18m RH Popup Saw Infeed & Outfeed Rolls ● 40” X 18’ Wide Sort Belt ● 18” 18’ Waste Belt Conveyor ● Twin 6” X 18’ Chop Outfeed Belts

Moulder Chop Line 3: Precision 14 RH Popup Chop Saw ● Precision 14 LH Popup Chop Saw ● In & Outfeed Rolls ● 42” X 16’sort Belt ● Twin 10” X 16’ Chop Outfeed Belts

Hammer Hog Line: Schutte 80-HZF Hammer Hog, 3600RPM, 125HP, 460V ● 16” X 96’ Waste Conveyor W/ 5HP ● Vibrating Conveyor 17” X 8’ ● Elworthy Metal Detector ● Starter Panel

Compressors & Air Dryers: Gardner Denver 50HP Screw Compressor; Model EDE9KE04; 230/460V; Controls ● Gardner Denver 15HP Compressor ● 2012 Atlas Copco FX10 Air Dryer

Dust Collection: (2) 2010 GFS Collection Modules, Model DCB-7-SG; 8.960 SCFM; Lightly used; 7.5HP Blower; 15 filters; 2,865 sq. ft. filters; Dimensions: 7’W x 8’2”H x 4’D; 8.4 Cu. Ft. dust storage; Air filter ratio: 3.1:1; Direct drive blower & motor, 208/230/460V ● 200HP X 72” Blower ● 10HP X 30” Blower

ROLLING STOCK● Hyster H280XL 28,000LB Forklift, S/N D007do1999l; Diesel; Cab ● Hyster H180H 18,000LB Forklift; S/N C7p4181c; Diesel; Cab ● Hyster H155XL2 15,000LB Forklift, LPG, Cab, Side shift, Fork Positioning ● Sellick SD 120 12,000 forklift, 4 CYL Perkins diesel, high/low range sideshift ● Toyota 8,000LB Forklift, Dual Front Tires, Side shift; diesel ● Clark 8,000LB Forklift, single drive, 2-stage 102”/145” lift; LPG

GENERALStrapping Machines: Akebono Auto Strapper ● Gerrard Oval Strapping Unit ● Gerrard Oval Strapping Unit ● Akebono Auto Strapper ● Strapack Auto Strapper ● Miller SRH-333 Welder ● Powerfist Horizontal Metal Cutting Band Saw ● General Drill Press ● Power Fist 50 Ton Shop Press ● Bearings ● Ready Rod ● Long Stock Rack, w/ steel inventory ● (4) Banding Carts ● Table Saw ● Pallet Jacks ● (3) Weld Screens ● Cabinet Of Safety Gear ● Fire Proof Storage Unit ● Spare Motors ● (20) Lumber Carts ● Hose Reels ● Westward Pallet Jack, 11,000lbs ● Pallet Of New Plastic Strapping 5/8” ● (2) Pallets Of New Samuel Poly & Edgeboard & Strapping ● Electrics: Saftronics EZ-Start VFD’s 10HP-40HP ● Saftronics EZ-Start Soft Starts; 25HP – 200HP ● Reset Panels ● Transformers ● 30 – 100 Amp Switchgear ● More…

INDUSTRIAL FINGERJOINT LINEOffered High Bid Subject To Owner Approval

Dimensions: 2” X 4” to 2” X 6”Capacity: 40-60,000 BF/Shift

18’ Rollcase End Squeeze w/ Scissor lift •8’ W X 12’ Infeed Transfer ● 8’ W 2 Arm Tilt Hoist ● Ogam 30HP Multirip Saw ● (2) Precision Saw Chop Line w/ Infeed Rolls ● Twin Outfeed Belts ● 5’ X 8’ Block Bin Conveyor ● Mid-Oregon Two Arm Block Bin Tilt Hoist ● 16” X 40’ Block Infeed Belt ● 6’ X 12’ Block Belt ● 22” X 10’ Incline Chevron Belt ● Industrial Finger Jointer; 30’ Press, Glue System, (2) Score Saws, (2) Trim Saws, (2) Cutter Heads, Zero Saw ● Del Schneider 50HP Hydraulic Power Unit ● 10” X 36’ Belt (Grading) ● 10’ X 4’ 4 Strand Transfer ● 15’ Adjustable P.E.T. Saw ● Outfeed Rollcase ● Finger Jointer Line Electrical ● (44) 7’x5’x5’ Block Bins (to be sold only if FIngerjoint line sells)

WESTERN PNEUMATIC LONG LENGTH FINGER JOINTER LINEFor Immediate Sale as Package by Private Sale - Not in Auction

Dimensions: 2” X 4” to 2” X 12” X 40’ Max Capacity: 85,000BF/Shift based on 2” X 6”

5’ X 30’ Finger Jointer Infeed Rollcase ● 8’ X 28’ 3 Strand Jump Chain Transfer ● Advance 8’ W 3 Arm Tilt Hoist, w/ Hydraulic Drive ● 10” X 15’ Stick Belt ● 8’ X 18’ 3 Strand Spill Deck ● 23” X 12’ Waste Belt ● 8’ 5 Strand Lug Chain, w/ End Trim ● 12” X 12’ Waste Belt ● Qauser DLFM-5-390-1 Moisture Meter ● Control Console ● 12 X 12’ Transfer w/ belt ● 11’ X 21’ 2 Saw Finger Jointer Trim Table ● Western Machinery Line Infeed Rollcase ● Western Finger Jointer; S/N FJ19628, 575V; Crowder Rolls ● 48’ COE Radio Frequency Heat Tunnel ● Outside Head Cut Off Saw; Outfeed Rolls To 35’ Trim Table; (4) Saw ● 16’ X 21’ 5 Strand Camelback Grading Chain ● 12’ X 15’ 5 Strand Incline Belts ● 15’ W 5 Arm Stick Stacker ● 12’ X 15’ 5 Strand Incline Belts ● 15’ W/ 5 Arm Stacker System ● 12’ X 33’ 9 Strand Package Outfeed Transfer ● (5) 8’ Incline Belts ● 33’ X 10’ 7 Strand Stacker To Incline Crown Tension Test System w/ controls ● 15HP Stacker Hydraulic Power Unit

BID LIVE, REAL TIME, ON-LINE! REGISTER AT: