West 19 2015

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

® WesternEdition

$3.00

Cashman Shows Bing How

to Save on Fuel Costs...8

Excavator Makes Trip

From Tenn. to Texas...10

Inside

By Erik PisorCEG CORRESPONDENT

Both on and off the basketball court, theSacramento Kings organization is in astate of transition. Internally the organiza-tion’s new president of basketball opera-tions bolstered the team’s roster via offsea-son signings.

Off the court the organization hasassembled another team, this one com-prised of contractors tasked with buildingan iconic, new arena for the city’s down-town — the 17,500-seat, $477 millionGolden 1 Center.As fall nears, the project reaches an

important milestone, the completion and

Kings’ Golden 1 Center Rises

By David A. LiebASSOCIATED PRESS

JEFFERSON CITY, Mo. (AP) While Congressremains stalled on a long-term plan for funding high-ways, state lawmakers and governors aren’t waitingaround. Nearly one-third of the states have approved meas-

ures this year that could collectively raise billions ofdollars through higher fuel taxes, vehicle fees andbonds to repair old bridges and roads and relieve trafficcongestion, according to an analysis by The AssociatedPress. The surge of activity means at least half of the states

— from coast to coast, in both Republican andDemocratic areas — now have passed transportationfunding measures since 2013. And the movement may not be done yet. Tennessee’s governor made a 15-city tour highlight-

ing the state’s transportation needs. North Carolina law-makers are debating a road-bonding proposal. And leg-islators are returning to work in California andMichigan with transportation funding on the agenda. “I don’t know of a state that’s not having the conver-

sation’’ about raising revenue for transportation, saidIowa Transportation Director Paul Trombino III, who isvice president of the American Association of StateHighway and Transportation Officials and whose homestate recently raised fuel taxes by 10 cents a gallon.

States Take Leadon Road Funding

Tulsa, Okla., welcomes

Pipeline/Energy Expo...12

September 19, 2015 • Vol. IX • No.19 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215/885-2900 • Toll Free 800-523-2200 • Fax 215/885-2910

www.constructionequipmentguide.com

Hawthorne Cat, the exclusive Catequipment and engine dealer in SanDiego and the Pacific Region, isexpanding its corporate campus inRancho Bernardo, Calif., with theaddition of an engine, generator andon-highway truck testing facility.Hawthorne Cat senior executivesalong with Barnhart-ReeseConstruction Inc. executives, thearchitect and general contractor, par-

ticipated in the official groundbreak-ing ceremony.As part of a 55,000 sq.-ft. (5,109

sq m) building upgrade, the newDyno Shop engine testing capabilitywill help Hawthorne Cat meet thegrowing market demands over thenext 20 years, according to the com-pany. The 5,000 sq.-ft. (464 sq m)

see HAWTHORNE page 56

Table of Contents................4

Recycling Section ........................................................13-23

Parts Section................33-37

Truck & Trailer Section ............................................ 43-45

Auction Section ..........48-57

Business Calendar ............56

Advertisers Index..............58

Erection of the arena’s steel frame has been the focus of two Liebherr crawlercranes this entire year — the LR 1300 and the LR 1200.

see REPAIRS page 42

Published Nationally

Hawthorne Cat BreaksGround on Dyno Shop

Golden 1 Center photo

see ARENA page 32

Hawthorne Cat, Barnhart-Reese Construction Inc. and WaltConwell Architects Inc. officials at the groundbreaking.

• September 19, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

$117,0002012 Komatsu D51EX-22

EQ0025573

$64,6002013 Hamm 3205P

EQ0026363

$70,0002008 Komatsu PC200LC-9

EQ0028607

$225,0002013 Komatsu PC290LC-10

EQ0026719

$165,0002002 National 18142

EQ0027966

$195,0002007 G ve RT530E

EQ0008565

$120,0002006 National 9103A

EQ0007418

$170,0002013 Komatsu WA320-7

EQ0026723

$53,5002009 Leeboy 8510

EQ0019388

$65,0002008 Komatsu WA200PZ-6

EQ0023610

$135,8002007 Komatsu D155AX-6

EQ0026629

$210,0002012 Bomag MPH122-2

EQ0028080

$108,0002010 Komatsu PC200LC-8

EQ0015634

$134,0002007 National 13110 AWL

EQ0008630

$89,9002006 Broderson IC200-3F

EQ0008145

$65,0002008 Volvo EC330

EQ0027842

$25,0002012 Gehl 5640EQ0015161

$155,0002012 Kleeman MS16Z

EQ0028601

$45,0002003 Cat AP-1055B

EQ0028657

$79,5002009 Komatsu PC138USLC-8

EQ0015520

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 19, 2015 •

2012 Cat D6T XW, Stk#: 9833, EROPS, A/C, RearScreen, Angle Blade w/Hyd. Tilt, 1,641 hrs., 30"Pads, Allied W6G Winch s#AW6GE6F1714C71,14' 6" Wide ........................................$219,500

2003 JLG 400S, Stk#: 9652, 500 lbs., 40 ft.,4WD, 4,810 hrs., 12x16.5 Tires, 3 Cyl. DeutzEng ......................................................$19,500

2006 Lull 644E, Stk#: 9580, 6,000 lbs., 44 ft.,4,060 hrs., 4WD, 4WS, 48" Forks, 51" Frame,Aux. Hyd., Hyd. Self Leveling System, 13.00x24Foam Filled Tires, 4 Cyl. Cummins Eng$29,500

2013 Doosan LSC, Stk#: HR-225, 3,388 hrs., St.175x80R13 Tires, 3 Cyl. Kubota ............$5,500

1995 Cat 330LC, Stk#: 9935, EROPS, A/C,24,118 hrs., Grapple, 28" Pads, 12 ft. Wide, 15ft. 6" Height ..........................................$32,500

2006 Gradall 534D-10, 9649, 9,000 lbs., 45 ft.,4,766 hrs., 4WD, 72" Forks, 69" Frame, 14.00x24Foam Filled Tires, Hyd. Self Leveling System, 4Cyl. JD Eng ..........................................$38,500

2006 JLG G6-42A, Stk#: 9705, 6,000 lbs., 42 ft.,4WD, 4WS, 4,363 hrs., 48" Forks, 48" Tilt Frame,13.00x24 Foam Filled Tires, Hyd. Self LevelingSystem, 4 Cyl. JD Eng..........................$27,500

Cat PA56 E00100E, Stk#: 9202, Winch with fairleads for D6T........................................$16,500

2013 Cat 320EL RR, Stk#: 9910, EROPS, A/C,FM Stereo, 2,904 hrs., 32" Bucket, 32" Pads,Acert C6C Cat Eng., 10' 6" Wide ........$132,500

2007 JLG 1930ES, Stk#: 9702, 500 lbs., 19 ft.Platform Height, 246 hrs., Electric Power ........................................................................$6,500

2012 Cat D4K II XL, Stk#: 9926, OROPS, 6 WayBlade, 80% U/C, 1,210 hrs., 18" Pads, C4.4Acert Eng., 9 ft. Wide ..........................$72,500

Ripper for Dozer, Stk#: 299, S# 1EH02480 ....................................................................$9,500

2012 Volvo EC380DL, Stk#: 9941, EROPS, A/C,FM Stereo, 5,243 hrs., 60" Digging Bucket, 36"Tracks, Volvo VACT eng., 12' 2" Wide$125,500

2008 Cat D6T LGP, Stk#: HR-233, EROPS, A/C,FM Stereo, Sweep, Rear Screen, St/Tilt Blade,7,426 hrs., Paccar PA56 Winch, 36" Pads, 10'5"Height, 10'7" Wide Track to Track, 13 ft. Blade ..............................................................$189,500

2011 JLG 534D9-45, Stk#: 9862, 9,000 lbs., 45ft., 5,066 hrs., 4WD, 4WS, 60" Forks, 74' Frame,Aux. Hyd., Hyd. Self Leveling System, 13.00x24Tires, 4 Cyl. Cummins Eng ..................$38,500

2008 Cat D3K LGP, Stk#: 9908, OROPS, 6 WayBlade, 3,582 hrs., 25" Pads, 4 Cyl. Cat Eng., 10'4" Wide ................................................$49,500

2012 Cat D3K XL, Stk#: 9836, EROPS, A/C,Sweeps, 6 Way Blade, 2,409 hrs., W03 Rippers#JMJ01092, 16" Pads, 9' 6" Wide ......$82,500

1997 Case 580SL, Stk#: 9931, EROPS, 4WD,8,063 hrs., 24" Bucket, 90% Tires, Extandahoe, 3Stick Controls, 12x16.5 Front Tires, 19.5x25Rear Tires ............................................$26,500

2006 Lull 944E-42, Stk#: 9664, 9,000 lbs., 42ft., 3,948 hrs., 4WD, 4WS, 60" Forks, 72" TiltFrame, Hyd. Self Leveling System, 15.5x25Foam Filled Tires, 4 Cyl. Cummins Eng.$36,500

1997 Case 580L, Stk#: 9951, OROPS, 4WD,4,911 hrs., 24" Bucket, Extandahoe, 3 StickControl, 12x16.5 Front Tires, 19.5Lx24 RearTires ....................................................$22,500

2006 Hitachi ZX50UNA-2, Stk#: 9936, OROPS,3,054 hrs., 24" Bucket, 78" Push Blade, 16"Rubber Tracks, 4 Cyl. YanMar Eng ......$18,500

2004 JLG 600S, Stk#: 9781, 500 lbs., 60 ft.,5,870 hrs., 4WD, 15x19.5 Tires, 4 Cyl. DeutzEng ......................................................$32,500

2006 Skytrak 8042, Stk#: 9505, 8,000 lbs., 42ft., 3,717 hrs., 60" Forks, 60" Frame, Aux. Hyd.,13.00x24 Tires, Hyd. Self Leveling System, 4Cyl. Cummins Eng................................$36,500

2012 Volvo MLT135C, Stk#: 9831, OROPS, 814 hrs., 78" Bucket, Aux. Hyd., 17" RubberTracks, 4 Cyl. JCB Eng ........................$32,500

2013 Case SV185, Stk#: 9525, OROPS, 145hrs., 64" Bucket, Aux. Hyd., Hyd. Quick Coupler,4 Cyl. CNH Eng ....................................$34,500

2015 Big Tex Dump, Stk#: 9928,ST235/85Rx16 Tires ............................$17,500

2008 Ingersoll-Rand SD45D, Stk#: 9964, 54"Smooth Drum w/Pad Drum Shell Kit, 628 hrs., 4 Cyl. Cummins Eng ............................$29,500

2011 Cat D6TXL, Stk#: 9913, EROPS, A/C &Heat, Sweeps, Rear Screen, Semi U Blade, 3,434hrs., Allied W6C Winch S#AW6GE6F1744C71,24" Pads, Cat C9 Acert Eng., 10' 10' Wide ....................................................................$186,500

2000 Doosan DX225LC-3, Stk#: 9911, EROPS,A/C, 7 hrs., 42" Bucket, Aux. Hyd., 24" Pads, 9' 10" Wide, 6 Cyl. Doosan Eng ........$132,500

2010 Skytrak 10042, Stk#: 9915, EROPS, A/C & Heat, 10,000 lbs., 42 ft., 5,846 hrs., 4WD,4WS, 72" Forks, 74" Frame, Aux. Hyd., Hyd. Self Leveling System, 17.5x25 Foam Filled Tires,4 Cyl. Cummins Eng ............................$49,500

2004 Bobcat T180, Stk#: 9904, OROPS, 2,754hrs., 66" Bucket, 12" Rubber Tracks, 4 Cyl.Kubota Eng ..........................................$16,500

2013 John Deere 210G LC, Stk#: 9852, EROPS,A/C & Heat, FM Stereo, 2,963 hrs., 42" Bkt w/Manual Thumb, 32" Pads, 10' 6" Wide $129,500

2006 Lull 644E, Stk#: 9580, 6,000 lbs., 44 ft.,4,060 hrs., 4WD, 4WS, 48" Forks, 51" Frame,Aux. Hyd., Hyd. Self Leveling System, 13.00x24Foam Filled Tires, 4 Cyl. Cummins Eng$29,500

"In Business for over 33 Years"www.hendrixmachineryllc.com

1-936-327-5430 • Email: [email protected] Se HablaEspañol

2008 Ditch Witch RT40, Stk#: 9700, 980 hrs.,4WD, 64" Push Blade, 6" Trench, 3 Cyl. Diesel Eng............................................................$16,500

2007 Case 590SM, Stk#: 9938, EROPS, A/C, FMStereo, 4WD, 4,134 hrs., 24" Bucket,Extandahoe, Pilot Controls, 14x17.5 Front Tires,21Lx24 Rear Tires ................................$38,500

2006 Genie Z60-34, Stk#: 9684, 60 ft., 4WD,1,508 hrs., IN385/65D19.5 Tires, Tires, 4 Cyl.Perkins Diesel ......................................$38,500

OEM Tracks, Stk#: 9720, New Original ExcavatorTracks: 28” Pad, 49 Links, 190MM Pitch, Cat,Komatsu, Hitachi, Volvo: Kobelco, Case, Linkbeltand Others..............................................$7,500


Construction Equipment Guide Western Edition (ISSN 2330-9792) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Western Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2015, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (includ-ing framing) in whole or part without written permission from the publisher. All editorial material, photographs, draw-ings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes andare subject to Construction Equipment Guide's unrestricted right to edit and comment editorially. Contributor articles donot necessarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is not respon-sible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used in advertise-ments are not necessarily actual photographs of the specific machine. Similar photographs are used occasionally andevery effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.

specIal secTIon

13 RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section!

Keep up to date with the latest information on recycling,

crushing and screening.

feaTuRes

8 OIL SAMPLING LEADS TO FUEL SAVINGS FOR BING MATERIALS

Joe Stella, fleet and production manager of Bing Materials, is still running a Cat988B wheel loader— a machine that debuted when Queen’s Bohemian Rhapsodywas topping the music Billboard charts for the first time in 1976.

10 SAMSUNG EXCAVATOR DELIVERY TURNS HEADS INSEALY, TEXAS

On a recent summer day when a 52-ton (47 t) Samsung 450 hydraulic track excavator made its way through Sealy, Texas, on a trailer, the residents noticed.

12 ENERGY INDUSTRY CONVERGES ON TULSA, OKLA.,FOR CONFERENCE

The Pipeline + Energy Expo returned to Tulsa, Okla., at a pivotal time in the energy industry.

14 MB AMERICA PARTNERS WITH BARKER TO BRINGLIVE DEMO

MB America Inc. partnered with Barker Enterprises to bring a live demonstrationof its crushing and screening attachments for excavators and high-flow skid steers,with the world’s largest crusher bucket on display, in Washington at CorlissResources, Inc.

20 BANDIT INDUSTRIES SUPPORTS LOCAL FOODDRIVE INITIATIVE

Bandit Industries is proud to be a supporter and sponsor of the annual Cans FromRace Fans food drive that merges the generosity of racing fans with the need of alocal soup kitchen. Over the last eight years, more than 60,000 pounds of foodand thousands of dollars have been raised and donated in Isabella County, Mich.,because of the unwavering generosity of the Isabella County community.

28 INTERSTATE TRAILERS APPOINTS NEW PRESIDENT,ANNOUNCES PROMOTIONS

Interstate Trailers’ Board of Directors has appointed Matt Laws, formerly nationalsales manager, to president, effective June 1, 2015.

40 LAWMAKERS FACE WEIGHTY LIST OF UNFINISHED BUSINESS, PENDING DEADLINES

Congress returned on Sept. 8 with a critical need for a characteristic rarely evidentthrough a contentious spring and summer — cooperation between Republicansand President Barack Obama.

52 RITCHIE BROS. HOSTS SUCCESSFUL AUCTION INPHOENIX, ARIZ.

More than 2,550 bidders participated online and in person at Ritchie Bros.Auctioneers’ multi-million dollar, unreserved, public equipment auction in Phoenix, Ariz., on Sept. 2, 2015.

54 WSM AUCTIONEERS HOLDS MONTHLY AUCTION IN PHOENIX

A large number of utility trucks, bucket trucks and other fleet vehicles were sold,in addition to a wide variety of construction equipment and other constructionmaterials.

equIpmenT

33 GEO-BOY Brush Cutter Tractor

34 ATLAS COPCO EC Range Hydraulic Breakers

43 CAT CT680 Vocational Truck

45 RUGBY MANUFACTURING HD Rancher Body

depaRTmenTs

46 CLASSIFIEDS

48 COMING AUCTIONS

56 BUSINESS CALENDAR

WesTeRn edITIonCirculated Throughout • Alaska • Arizona • California • Colorado • Hawaii

• Idaho • Montana • New Mexico • Nevada • Oklahoma • Oregon • Texas • Utah • Washington • Wyoming

Founder, Publisher & CEO Edwin M. McKeon Sr.Western Publisher Edwin M. McKeon Jr.

Editor In Chief Craig Mongeau Associate Editor Christine Allen

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034 215/885-2900

Toll Free 800/523-2200 Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates: Contact Kent HogeboomNational Sales Manager

315/866-1423Toll Free 800/988-1203

Fax 315/866-1379e-mail [email protected]

Contact Dale Agnew• Colorado • Louisiana

• Oklahoma • Texas

Toll Free 877/877-4997 Fax 972/695-6049

e-mail [email protected]

Contact Dennis Hogeboom• Arizona • California • Hawaii • Nevada

• New Mexico • Utah

602/679-8759e-mail [email protected]

Contact Patrick Kiel• Idaho • Montana • Oregon • Washington • Wyoming

Toll Free 866/413-4265Fax 952/353-2750

e-mail [email protected]

Mobile LinkedIn Facebook Twitter YouTube

To r ead t he s e s t o r i e s a nd many mo re , v is i t w w w . co n s t r u ct io nequipment guid e . com

In ThIs Issue

108

12

®


MehnDoug

od us tlll us tCayer / BrMehn

ay!dday!Gangeran y

.Rww.Rwwww

oused.cB

(866

mo

85) 4(866 -71

eblCe

0871

th r 30u ongg oratiingb

r!eaYYea

2007 KOMATSU WA200-6: #82234, CAB/AC,QC/BKT, RIDE CONTROL, LSD AXLES, KOM-TRAX, 4200 HRS..............................$99,750

2006 KOMATSU WA250-5: #82005, CAB/AC,QC/BUCKET, 3RD VALVE, HD BOOM, 4500HRS................................................$114,500

2008 KOMATSU WA380-6: #91487, CAB/AC,JRB QC/BUCKET, 4,300 HRS ........$169,500

2006 KOMATSU WA600-3: #81553,CAB/AC, 8YD SPADE NOSE W/ TEETH,4,650 HRS......................................$399,500

2008 KOMATSU D65EX-15EO: #81377,CAB/AC, 24” TRACKS, SEMI-U BLADE,DRAWBAR, 3300 HRS ..................$159,500

2007 KOMATSU D65EX-15EO: #81289,CAB/AC, SEMI-U BLADE, DRAWBAR, KOMTRAX, 3250 HRS....................$159,500

2008 KOMATSU D65PX-15EO: #81695,CAB/AC, 36” TRACKS, SWEEPS, REARSCREEN, 6550 HRS ......................$117,500

2007 KOMATSU D65WX-15EO: #81638,CAB/AC, 32” TRACKS, SIGMA BLADE,SWEEPS, KOMTRAX, 2900 HRS....$169,500

2008 KOMATSU PC220LC-8: #82213,CAB/AC, 31.5” TRACKS, QC, HYD THUMB,KOMTRAX, 6400 HRS....................$124,500

2007 KOMATSU PC220LC-8: #81976,CAB/AC, 31.5” TRACKS, LONG FRONT,DITCHING BKT, 5800 HRS ............$169,500

2014 KOMATSU PC210 LC-10: #82186,CAB/AC, 31.5" TRACKS, 9' 7" ARM, AUTOGREASER, 800 HRS ......................$169,500

2006 KOMATSU PC228US LC-3: #82164,CAB/AC, JRB QC, HYD THUMB, 5100 HRS ........................................................$139,500

2006 KOMATSU PC160 LC-7: #82134,CAB/AC, MECH THUMB, 5900 HRS ......................................................................$69,500

2014 KOMATSU PC138US LC-10: #82413,CAB/AC, JRB QC, BLADE, AUX HYD, KOM-TRAX, 650 HRS..............................$169,500

2011 KOMATSU PC138US LC-8: #82184,CAB/AC, HYD THUMB, BLADE, ROADLIN-ERS, REAR CAMERA, 3,100 HRS ..$139,500

2005 KOMATSU PC200 LC-7: # 92247,CAB/AC, 31.5" TRACKS, 9' 7" ARM, JRB QC,AUX HYD, 7,750 HRS ......................$74,500


Wind Speed AlarmWind Speed Alarm

508.995.2200 www.maximum-commercial.com

Helps prevent costly wind

damage!

3MAC

Visit www.sealsaver.comfor more information or contact us at

1-800-683-5189

Exclusively manufactured by:

Fluid ControlServices, Inc.

1155 Allgood Road • Suite 15Marietta, GA 30062

1-800-683-5189Fax: 770-509-5832

SEAL SAVER has proven effective inConstruction, Mining, Waste Management,Quarries, Refineries, Marinas, Recycling,Wood Products Processing, Steel Mills

and Hot Slag Industries.

SatisfactionGuaranteed!

SEAL SAVER PROTECTIVECYLINDER COVER

KOMATSUD65EX-15

STOP the never ending cycle of cylinder repairs.

Made inthe USA

The SEAL SAVER WILL:Protect cylinders from the elements

• Eliminate dings and dents from fallingdebris • Reduce particle contamination of hydraulic systems • Prevent pitting

due to chemical washes • Extend the lifeof cylinder seals • Eliminate rod scoring

Bacon-Universal Company, Inc.www.baconuniversal.comHIHilo808-935-8595 • 800-352-3508Honolulu808-839-7202 • 800-352-3508Kailua-Kona808-326-1212 • 800-352-3508Kauai (Lihue)808-245-8472 • 800-352-3508Wailuku Maui808-244-9158 • 800-352-3508

Clairemont Equipment Co.www.clairemontequipment.comCAEscondido760-739-9100Fontana909-429-9100Imperial760-355-7700Indio760-863-5558San Diego858-278-8351

Craig Taylor Equipment Companywww.craigtaylorequipment.comAKAnchorage907-276-5050 • 800-279-5051Fairbanks907-452-1192 • 800-452-1192Soldotna907-262-5977 • 800-254-5977Wasilla907-376-3838 • 800-973-2607

Kirby-Smith Machinery Inc.www.kirby-smith.comOKOklahoma City405-495-7820 • 800-375-3339Tulsa918-438-1700 • 800-375-3733TXAbilene325-692-6334 • 877-577-5729Amarillo806-373-2826 • 800-283-1247Dallas214-371-7777 • 800-753-1247Ft. Worth817-378-0600 • 877-851-9977Lubbock806-745-2112 • 866-289-6087Odessa432-333-7000 • 877-794-1800

Power Motive Corporationwww.powermotivecorp.comCOColorado Springs719-576-5541Denver303-355-5900Durango970-259-0455 • 970-259-0456Grand Junction970-241-1550Milliken970-587-1188WYCheyenne307-634-5149

Every Komatsu Tier 4 construction machine comes standardwith Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filter exchanges.With Komatsu CARE you can:

• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment

It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.

To learn more about Komatsu CARE

contact your Komatsu distributor or scan

this QR code with your smart phone.

GO WITH KOMATSU... AND GET THE ONLY

TIER 4 EQUIPMENT WITH COMPLIMENTARY

MAINTENANCE BUILT RIGHT IN.

WEST KOMATSU DISTRIBUTORS

T M

s

W

8

8

8

H

W

8

8

W

8

B M

P

2

I

F

8

A

8

O


TIER 4 FINAL HYDRAULIC EXCAVATOR

MADE WITH PASSION AND PRIDE

Komatsu Equipment Co.www.komatsueq.comNVElko775-753-7557North Las Vegas702-399-1004Sparks/Reno775-356-1334UTSt. George435-986-1000Pleasant Valley435-216-7777Salt Lake City801-972-3660 • 1-877-KomatsuSouth Jordan801-972-3660WYCasper307-682-1445Gillette307-682-1445Rock Springs307-686-1300

Modern Machinery, Inc.www.modernmachinery.comIDBoise208-336-8570 • 800-221-5211Pocatello208-233-5345 • 800-829-4450MTBillings406-252-2158 • 800-735-2589Kalispell406-755-5540 • 800-434-4190Missoula406-523-1100 • 800-332-1617OREugene541-688-7321 • 800-826-9811Portland971-222-1710 • 800-950-7779WAKent253-872-3500 • 800-669-2425Rochester360-273-4284 • 800-304-4421Spokane509-353-1654 • 800-541-0754

Road Machinery, LLCwww.roadmachinery.comAZGilbert480-545-2400Phoenix602-252-7121Prescott928-778.5621Tucson520-623-8681 • 800-989-8681CABakersfield661-695-4830Fremont510-659-1903Fresno916-350-0640Perris909-355-3600Redding530-229-3820Pico Rivera562-699-6767West Sacramento916-375-3540TXEl Paso915-872-1001NMAlbuquerque505-345-8383Farmington505-324-8601

Waukesha-PearceIndustries, Inc.www.wpi.comTXBeaumont/Port Arthur409-721-5305Buffalo903-322-7150Corpus Christi361-884-8275Edinburg956-386-0107Houston713-723-1050Kilgore903-984-2011Pflugerville512-251-0013San Antonio210-648-4444Tomball281-351-9016

www.komatsuamerica.com/komatsu-care


SAVE TIME • SAVE MONEYSAVE LABOR • SAVE OIL

• No tools required

• No expensive hardware needed

• No more rags stuffed into hoses

• No more messy plastic caps

• The ultimate contamination

control tool

• One hand installation

• Eliminate hydraulic

oil spills & clean up

• Quick installation

& ease of usage

• Safe for personnel & environment

• Industry acclaimed

• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com

INTRODUCINGFlangeLock Tool Boxes

4 Tool Boxes AvailableAll Include Slugs and O'Rings.

TM

Oil Sampling Leads to FuelSavings for Bing Materials

Joe Stella, fleet and production managerof Bing Materials, is still running a Cat 988Bwheel loader— a machine that debuted whenQueen’s Bohemian Rhapsody was toppingthe music Billboard charts for the first timein 1976. After almost 40 years, the Cat 988Bstarted having a few maintenance issues.Kevin Colvin, Stella’s Cashman Equipmentproduct support sale representative, suggest-ed he try oil sampling to monitor the healthof the machine. After a year and a half of oil sampling by

Cashman Fluids Analysis Lab, analystsbegan noticing an increase of metal in thetransmission. The test also revealed low oilviscosity (or thickness) showing that thecomponent was running hot. The recom-mendation was to keep an eye on it throughmore frequent sampling. Unfortunately, thenumbers still kept rising; a thorough serviceinspection revealed the need for a $57,000rebuild. Stella and Colvin looked at the age of the

machine and the hours on the machine frameand components. They discussed otheroptions to maintain productivity on Bing’sMinden, Nev., aggregate pit. The optionswere to buy new or rent while the machinewas repaired. The most practical answer was to rent a

Cat 980K wheel loader from Cashman’srental fleet. The 980K came equipped withProduct Link, Caterpillar hardware that pro-vides detailed information about the loca-tion, utilization and condition of themachine. With the accompanyingVisionLink software, Stella could login tosee details of machine performance right on

the dashboard—including the fuel utilizationtab. There, Stella found some hard facts.“With Product Link and VisionLink, I saw

the difference in the fuel myself rather thanlistening to the guesstimates of an operator,”said Stella. “With the 988B, we ran about 9.5gallons of fuel an hour. With the 980K, wenever break six gallons an hour.”Based on the approximate cost of fuel,

Stella estimated that the 980K was savingthem $2,500 per month—something he saidwould not have happened without Colvin.Colvin was the one who suggested oil sam-pling, as well as the 980K rental demo thatBing Materials eventually decided to buy. Ultimately, working with Colvin and sim-

ple oil sampling paid real dividends for BingMaterials. It now owns a piece of equipmentwhich allows it to ease the load on its 988B,start saving thousands in fuel and removetwo other machines from active productiondue to the efficiency of the 980K. “We got a good one with this 980K,”

Stella said. “It’s really the cat’s meow.”Cashman Equipment was founded in

1931 by James “Big Jim” Cashman. It is afull-service dealership, and provides newand used equipment for sale and rental, aswell as parts and service to mining, con-struction, paving, truck engine, on-highwaytrucks and power system industries through-out Nevada and parts of California. For more information, visit www.cash-

manequipment.com. (This story also can be found on

Construction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)

(L-R) are Kevin Colvin, Joe Stella and Woody Heckathorn, Bing Materials loaderoperator.


Samsung Excavator Delivery Turns Heads in Sealy, TexasBy Brenda RuggieroCEG CORRESPONDENT

On a recent summer day when a 52-ton(47 t) Samsung 450 hydraulic track excava-tor made its way through Sealy, Texas, on atrailer, the residents noticed. The machine was delivered from

Memphis, Tenn., to purchaser Allen Brock,and came on an older-style Kenworth withan eight-axle load. The tractor had four setsof wheels, the trailer had three, and a stingeron the back had another set of wheels thathelped even out the tonnage, allowing it tobe shipped in one load rather than two. “I had to get in the truck and ride

along with him because there are twoways to get to where I live,” Brocksaid. “I was thinking that maybe wecould get him in one direction, but thenI saw the length of the trailer and theload, and there was absolutely no waythat he would be able to get down thisroad and make the 90-degree turns withhis trailer. So I had to get in the truckwith him and take him down throughdowntown Sealy. He continued, “I don’t know if I

would have done it, but he was able tonegotiate the small lanes and trafficlights and the turns, and it went throughthere fine. A lot of people were looking,though. When something like thatcomes through Sealy, Texas, it might aswell be the President of the UnitedStates. They don’t ever see anything like thatcome through Sealy.” The delivery was handled by DIGit Dirt

Worx Inc., located outside of Memphis andrun by father and son team, Phil and DonGarriside.“They are very professional shippers,”

Brock said. “Phil was great.” Decades of searching led Brock to the

machine he purchased.“It was probably 25 to 30 years’ worth of

looking at pieces of equipment, sizing up the sizeand the price and what you get,” he said. “It’sbeen a God’s plenty of searching photos andinternet sites like machinerytrader.com, Rockand Dirt… if it’s out there, I’ve looked at it.”Brock’s interest in machinery and heavy

equipment started at a young age. He was sixmonths old when he moved with his parentsto Cat Spring, Texas, which presented a lotof new opportunities for him.“Everything that you don’t get to do as a

city kid, you get to do on the ranch, like drivea truck, mow grass, and shred property, andI started doing that,” he said. “When my dadmowed the grass, he hooked a little bumperseat up to the lawn mower where I sat on theback and rode while he mowed the grass, soI learned at a very early age how to steer ariding lawn mower. That was probably when

I was about two, and then I started mowinggrass myself. Then he put me on the big farmtractor, and put a bumper seat on the farmtractor — which by the way was as danger-ous as you can get. How many times I couldhave died was unreal. But at the age of prob-ably four, I was able to shred property with abig farm tractor, and I hooked up all theimplements to the surprise of my dad. Wewould be shredding property in the eveningwhen he got home, so I took the tractor anddisconnected the disc and hooked up theshredder ready for property shredding, andhe just couldn’t believe that I was able to dothat at such a young age. I was driving apickup when I was five years old.”There were a lot of improvements that

needed to be done on the ranch, and compa-nies would be hired out to do them, bringingtheir bulldozers, front end loaders, graderblades, and whatever was needed to com-plete the job.“I always asked if I could ride along and

watch how they loaded trucks and dug pondsand such,” Brock said. “I’d always be outthere looking around the machine and get-ting on it. Even though they tried to hide thekey, I always found it. They’d have to dig athree-foot hole and bury the key before Icouldn’t find it. When they left, I’d get on themachine and fiddle around a little bit, proba-

bly when I was 12 years old. So I alwaysenjoyed heavy equipment from a young age.I don’t even know why, but the bigger, thebetter. Dad brought me pictures of a machinehome and it would be a very large excavatorshovel, and it just amazed me — the size ofthe machine and the person standing besidethe tracks running this thing. I’ve always hada liking for it.” Besides his training at home, Brock is also

thankful for the education he got in highschool from auto mechanics teacher, RobertZubicek, and FFA teachers, Jay Hancockand Tommy Eckelberg, who taught smallengine repair, large engine, welding, and cut-ting.During summer breaks, he worked for his

uncle mining calcium sulfate, and continuedthere after he graduated, running reclaimers,milling machines, front end loaders, excava-tors, maintainers, and drag lines. In addition,he got his Class A CDL license to drive 18-wheelers.Brock’s family was part owner in a com-

pany called Houston Mooring whichinvolved mooring ships to their prospectivedocks when they came in from the Gulf ofMexico into Houston. He helped out withthat company from the time he was 13. Hespent a lot of time watching the harbor tugswork ships into the slips and docks, and healso became interested in that, and decidedto pursue a career there.Currently, he works as a licensed harbor

tug captain at the Port of Houston, dockingand mooring huge ships from all over theworld. He stays there for four days, which is96 straight hours. When he is relieved byanother captain, he goes home for four days. “I usually spend my first two days at the

ranch where the machine is, getting it towhere I feel comfortable with it being on ajob and getting it up to date and working,” hesaid. “I don’t ever want to get it on the joband have to replace a hose if I already knewit needed replacing, I’ll go ahead and get thatdone now.”Brock said that his dad wants him to quit

tearing up his yard.“It looks like a bomb hit it,” he said.

“Every time I move the machine I have to goget the farm tractor and start smoothing overwhere I went, because it’s really a com-pactor. It’s rated at a 52-ton machine.”When Brock first started looking at mak-

ing a purchase, he learned that the bigger thenumber on the machine, the smaller the pricewas. “I’m not sure why,” he said. “I never real-

ly wanted to go small, because if I had some-thing big to do, then I’d wind up having toput this one down and go get something bigjust to be able to do the job. So if I got some-thing big, I’d be able to do small jobs with it,and the big jobs, and being that the price wasas low as it was on the 450 vs. the 200, wellit speaks for itself. You get a bigger machine— a machine that can do more than a 200ever thought about doing in less time and itcosts less. The only drawback to that is theshipping price goes way up.”Brock did a search and a Samsung 450

came up.“I immediately called,” Brock said. “It

was a broker who had it for sale, and hisname was Justin Gatewood. He ownsGatewood Equipment out of Memphis, andhe’s a very nice fellow. He worked with mefrom start to end, and even after I bought thething I had some questions, and he was ableto get me to the right information. Hebrought out everything that needed to bedone on the machine. He was a liaisonbetween the owner of the machine andmyself for what I would like to have donebefore I bought it. The machine was locatedin Memphis, and I live in Cat Spring, Texas,and I think that the number that was given tome when they delivered the machine was667 miles from start to finish.”Brock noted that the company and the

man he bought the excavator from do busi-ness together, and he was able to get a ship-ping price that matched what he could affordto get the machine plus shipping.

On a recent summer day when a 52-ton (47 t)Samsung 450 hydraulic track excavator madeits way through Sealy, Texas, on a trailer, the residents noticed.

In the future, Brock hopes to be able toexpand his fleet to be able to work fulltime.

see EXCAVATOR page 24


Allis Chalmers HD-21 Dozer, 1:50 Scale ......................................$100

Allis Chalmers TS-300 Motor Scraper, 1:50 Scale......................$100

Barber Greene 260C Wheeled Paver, 1:50 Scale........................$185

Bobcat S530 Skid Steer Loader, 1:25 Scale ..................................$45

Bobcat T550 Track Loader, 1:25 Scale............................................$60

Bobcat S570 Skid Steer Loader, 1:25 Scale ..................................$45

Bobcat 743B Skid Steer Loader, 1:25 Scale ..................................$40

Bobcat 7753 Skid Steer Loader, 1:25 Scale ..................................$45

Bucyrus Erie 22B Cable Backhoe, 1:50 Scale ............................$250

Case 1102 Vibromax Roller, 1:35 Scale ..........................................$75

Case CX210C Excavator, 1:50 Scale ..............................................$50

Case CX250C Excavator, 1:50 Scale ............................................$175

Case 330D Articulated Dump Truck, 1:50 Scale ..........................$50

Case 580 ST Backhoe/loader, 1:50 Scale ....................................$100

Case 1850C Dozer, 1:50 Scale..........................................................$50

Caterpillar 16G Motor Grader (NZG), 1:50 Scale ........................$135

Caterpillar 140H Motor Grader, 1:50 Scale ....................................$75

Caterpillar 325L Excavator (NZG), 1:50 Scale ............................$160

Caterpillar 340D L Excavator, 1:50 Scale ....................................$150

Caterpillar 365B L Series II Excavator, 1:50 Scale......................$100

Caterpillar TH407C Telehandler, 1:32 Scale ................................$100

Caterpillar 428 Backhoe w/Hammer, 1:50 Scale ..........................$50

Caterpillar 980K Wheel Loader, 1:50 Scale..................................$125

Caterpillar CT660 Day Cab Tractor w/Trail King Lowboy Trailer,

1:50 Scale ..........................................................................................$110

Caterpillar D6K XL Track-Type Tractor, 1:50 Scale ......................$65

Caterpillar D6R Track-Type Tractor, 1:50 Scale ............................$90

Caterpillar D7E Track-Type Tractor, 1:50 Scale ............................$85

Caterpillar D10N Track-Type Tractor, 1:50 Scale ..........................$50

Caterpillar D10 Track-Type Tractor (Conrad), 1:50 Scale ..........$185

Caterpillar D11R Track-Type Tractor, 1:50 Scale ........................$100

Caterpillar D250E Articulated Truck (NZG), 1:50 Scale ............$125

Caterpillar 302.5 Mini-Excavator, 1:32 Scale..................................$50

Caterpillar MH3049 Material Handler w/magnet, 1:50 Scale ....$140

Caterpillar 428B Backhoe/Loader(NZG), 1:50 Scale ....................$75

Caterpillar 428C Backhoe/Loader (NZG), 1:50 Scale ..................$75

Caterpillar 438C Backhoe/Loader (NZG), 1:50 Scale ................$135

Caterpillar PR-450 Pavement Profiler (NZG), 1:50 Scale ..........$135

Caterpillar 511OB Excavator, 1:50 Scale ......................................$115

Caterpillar 621K Motor Scraper, 1:50 Scale................................$150

Caterpillar 631E Motor Scraper, 1:50 Scale ..................................$50

Caterpillar 775G Off-Highway Truck, 1:50 Scale ........................$120

Caterpillar 920 Wheel Loader (Conrad), 1:50 Scale....................$110

Caterpillar 980G Military Wheel Loader, 1:50 Scale ....................$60

Caterpillar 988B Wheel Loader, 1:50 Scale....................................$60

Caterpillar 988F Wheel Loader (NZG), 1:50 Scale ......................$115

Caterpillar 5080 Shovel, 1:50 Scale ................................................$70

Dynapac SD2500 CS Road Paver, 1:50 Scale ............................$125

Grove TM1500 White 6 Axle Crane, 1:50 Scale ..........................$140

Hamm 3414 Pad Foot Compactor, 1:50 Scale ..............................$90

Hyundai 210LC-9 Excavator, 1:40 Scale ......................................$100

International 175 Crawler w/Demo Bucket, 1:25 Scale..............$150

International 350 PayHauler, 1:50 Scale ......................................$225

International 560 PayLoader, 1:50 Scale ......................................$140

International TD-14 Crawler Dozer, 1:16 Scale............................$140

JCB 190 Skid Steer Loader, 1:35 Scale ..........................................$65

JCB 467 WLS Front End Loader, 1:50 Scale ..............................$120

JCB 531 Loadall W/Bucket, 1:35 Scale ..........................................$80

JCB 930 Rough Terrain Fork Lift, 1:35 Scale ................................$50

John Deere 315SJ Backhoe/Loader, 1:50 Scale ..........................$40

John Deere 400D Articulated Dump Truck, 1:50 Scale................$50

John Deere 460E Articulated Dump Truck, 1:50 Scale................$70

John Deere 624J Military Wheel Loader, 1:50 Scale....................$40

John Deere 850C Dozer, 1:50 Scale ................................................$45

John Deere 66575 Skid Steer Loader, 1:50 Scale ........................$45

John Deere MC Crawler Dozer, 1:16 Scale..................................$100

Komatsu CK25 Compact Track Loader, 1:50 Scale ....................$45

Komatsu D51 EX Dozer, 1:50 Scale ................................................$80

Komatsu D51PXi-22 Dozer, 1:50 Scale ..........................................$85

Komatsu D155AX Dozer w/ripper, 1:50 Scale ..............................$95

Komatsu D375A Dozer, 1:50 Scale................................................$100

Komatsu GD655 Motor Grader, 1:50 Scale....................................$90

Komatsu HM400-3 Articulated Truck, 1:50 Scale ......................$100

Komatsu PC200-8 Excavator, 1:50 Scale ....................................$125

Komatsu D475A Dozer, 1:50 Scale ................................................$115

Komatsu WB146 Backhoe/Loader, 1:50 Scale..............................$75

Link Belt 250 X3 Excavator, 1:50 Scale ........................................$150

O&K RH9 Excavator, 1:50 Scale ......................................................$75

Terex 33-07 Off-Highway Truck (NZG), 1:40 Scale........................$75

Vogele 1900-2 Road Paver, 1:50 Scale ........................................$140

Vogele 2100-3 Road Paver, 1:50 Scale ........................................$145

Vogele MT3000-2i Power Feeder, 1:50 Scale ..............................$145

Volvo A40F Articulated Hauler, 1:50 Scale ..................................$120

Volvo A40F Articulated Dump Truck, 1:50 Scale ........................$110

Volvo L60G Wheel Loader, 1:50 Scale............................................$90

Volvo L220G Wheel Loader, 1:50 Scale........................................$120

Wirtgen 100F Tracked Cold Milling Machine, 1:50 Scale ..........$120

Wirtgen 240 Recycler, 1:50 Scale ..................................................$140

Wirtgen WR2000 Recycler, 1:50 Scale..........................................$100

Shipping and Handling Included WE PURCHASE COLLECTIONS!!!

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

Toys For Boys(and also men)Realistic Scale Models of Construction Equipment, ideal gifts for the Holidays, Birthdays, Graduation, etc.

Caterpillar 365C L Front Shovel, 1:50 Scale - $110

John Deere 470G LC Excavator, 1:50 Scale - $85

Komatsu WA500 Wheel Loader, 1:50 Scale - $90

Case 1550 Dozer, 1:16 Scale - $100


Energy Industry Converges on Tulsa, Okla., for Conference

(L-R): Sam Wells, Westco International Inc., in Tulsa, Okla., is learningabout the 2450 FR ground penetrating radar and the TK Tracker fromVikki Beiere, Subsite, and Gary Lawson of Ditch Witch, both in Perry,Okla.

Randy Hayes (L), corporate sales director of Vacuworxand David Ward, Protoloads LLC in Mt. Pleasant, N.C.,present the Vacuworx hydraulic concrete road barrierlifter.

(L-R) are Nick Samain, vice president, event director MMGEvents; Bill Soloman, CEO Vacuworx and show chairman;Mayor Dewey Barlett, Tulsa, Okla.; Tom Sewell, presidentof Tulsa Gas Technologies and co-chair NGVOK (NationalGas Vehicle Oklahoma; and Michele Trantham, eventdirector NGVOK, officially open the 2015 Pipeline andEnergy Expo.

(L-R): Phoebe Daugherty and Andy Solomon, owner of Challenger Services in Tulsa, Okla., joinGeorge Denny, Vacuworx, in explaining all their capabilities.

Jim Solomon (L), managing director of ShieldInternational in Tulsa, takes a photo “op” with GeorgeDenny, Gulf Coast sales director of Vacuworx based inTulsa.

Phillip Smith (L), SmithCo Engineering in Tulsa, Okla., andDon Sloss, Air Capital Equipment, a Sullair dealer, presenttheir concept air-coolers powered by Sullair. The Pipeline + Energy Expo returned to Tulsa,

Okla., at a pivotal time in the energy industry.The revitalized event allowed attendees to

equip themselves for the rebound with the latest tech-nology and knowledge in the pipeline and energyindustry in Oklahoma. With a major tradeshow,two‐day conference and premier networking events,The Pipeline + Energy Expo is the recognized lead-ing event serving energy and pipeline professionals.This year’s event was comprised of an expanded

two‐day expo that featured 100+ exhibitors andfocused on the latest innovations and key players inthe industry. The event showcased Oklahoma’s richheritage in the energy industry and increased con-nections between surrounding states and Canada.The Pipeline + Energy Expo and Natural Gas

Vehicles Oklahoma (NGVOK) joined forces to bringtwo conferences under one roof. Key governmentrepresentatives, industry professionals and expertsfrom Oklahoma and surrounding states explorednew opportunities and advanced interest in pipelinechallenges, regulation, integrity, proposed projectsand CNG.

The Cat MH3027 is the fourth and small-est in the series of new wheeled materialhandlers that Caterpillar is introducing toglobal markets in the greater than 27.5 ton(25 t) size class. At 62,832 lb. (28,500 kg),the MH3027 delivers increased perform-ance in a smaller package — specifically aswing radius that is 8.3 in. (21.3 cm) lessthan the Cat MH3037. The new Cat material handlers are pur-

pose-built from the ground up to work pro-ductively and reliably in solid waste andscrap recycling. The MH3027 is availablein configurations for waste handling, fea-turing a straight stick, and for scrap han-dling, featuring a drop nose stick. A debrisresistant cooling package with a hydraulic,variable speed, auto reversing fan and plugresistant coolers equips the machine forchallenging conditions. The MH3027 also provides added pro-

tection and convenience for the operator.The Cat cab avoidance system, using sen-sors on the front linkage, is standard equip-ment and helps ensure that the work toolwill not contact the cab. New with theMH3027 model, customers can select fromtwo hydraulic cab riser options. Customerscan choose the cab-to-platform configura-tion or customers can choose the “groundlevel entry and exit” with a step-in cab thatlowers to the front or the side of themachine to enhance convenience and safe-ty for operators and service personnel. Thehydraulic cab riser takes the operator to 18ft. (5.5 m) for optimal jobsite visibility.Additionally, the cab features joysticksteering control, which eliminates the steer-ing wheel and opens the front view for theoperator. A standard rearview camera alsoexpands sight lines with optional side viewcamera.The MH3027 is powered by a Cat C7.1

ACERT engine that meets U.S. EPA TierIV Final/EU Stage IV emissions standards.Operation of the emissions control systemis completely transparent to the operator —with no downtime for particulate filterregeneration. The engine features an elec-tronically controlled, mechanically actuat-ed, unit-injector fuel system that uses mul-tiple-injection fuel delivery for optimum

power and economy in all operating situa-tions. The MH3027 configuration is ratedat 173 hp (129 kW).The intelligent, load-sensing hydraulic

system delivers power when needed andreduces fuel burn. High strength structuralsteel and advanced welding techniquesensure structural integrity. And enhancedserviceability features, such as auto lube forthe upper area of the machine and central-ized manual lube for the lower, simplifymaintenance.

Hydraulics and Drive TrainUsing a closed-center, one-pump, load-

sensing implement hydraulic system withelectro-hydraulic pilot control, the hydraulicpump generates only as much oil flow andpressure as required for the application,yielding powerful, rapid response and fuel-saving efficiency. To further enhance over-all hydraulic power and efficiency, themachine regenerates boom-down oil flow,reducing the volume of oil the pump mustproduce. True four wheel mechanical drive pro-

vides excellent maneuvering performanceeven on unimproved terrain. A variable dis-placement hydraulic motor coupled with atwo-speed transmission provides high- andlow-speed travel with creeper speed capa-bility for control due to the infinitely vari-able travel speed. An oscillating rear axleprovides smooth travel over rough terrain.The rear axle is equipped with an oscillationlock that provides greater stability duringlight duty material handling without stabi-lizers deployed, according to the manufac-turer.

Serviceability and Work ToolsDurable fiberglass gull-wing panels sup-

ported by gas-filled cylinders provide readyaccess to the routine maintenance points inspacious, lighted compartments. Servicepanels are located on the top, left and rightside of the machine. Handrails and anti-slipsurfaces help technicians perform theirwork safely and efficiently.To assist customers in improving jobsite

efficiency and managing the MH3027 for

optimum return on investment, Cat Connectoffers LINK and DETECT technologies.Product Link helps fleet owners track loca-tions, hours, fuel consumption, idle time,events and diagnostic codes by wirelesslyreporting all via the online VisionLink userinterface to help lower owning and operat-ing costs.The MH3027 can handle a variety of

work tools. The machine features medium-pressure flow from a separate valve for toolrotation and a high-pressure circuit from themain pump to operate the open/close func-tions of typical tools, such as orange-peelgrapples, clamshells and log grapples.A separate pump is used to provide

hydraulic power to operate a generator foran optional scrap magnet. The generatorfeatures a Cat solid-state magnet controllerthat has a sorting feature to aid the operator.For more information, visit

www.cat.com/MH3000.(This story also can be found on

Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Cat MH3027 Delivers Productive, Reliable Performance

Pages 13-23

Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.

The MH3027 is available in configurations for waste handling, featuring a straight stick, and for scrap handling, featuring adrop nose stick.

• September 19, 2015 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide

MB America Partners With Barker to Bring Live DemoMB America Inc. partnered with Barker

Enterprises to bring a live demonstration of itscrushing and screening attachments for exca-vators and high-flow skid steers, with theworld’s largest crusher bucket on display, inWashington at Corliss Resources, Inc.Attendees saw crusher bucket models

designed for both excavators and high-flowskid steers and a screening bucket model forexcavators. The crusher buckets were crush-ing hollow core walls, reinforced and normalconcrete, 10-inch minus river rock, naturalstone and asphalt.“See for yourself how remarkable this tech-

nology is. You wouldn’t find anything like ourcrushing and screening attachments on themarket,” said Miriano Ravazzolo, CEO ofMB America.Along with the demonstration, the world’s

largest crusher bucket, the BF150.10, was dis-played for attendees to view.The BF150.10 weighs in at 23,150 lb.

(10,500 kg), and it is designed as an attach-ment for excavators exceeding 154,000 lb.(69,853 kg). It has a load capacity of 3.2 cu.yds. (2.45 cu m), a bucket opening of 57 x 28in. (144.78 x 71.12 cm) and is capable of aproduction between 78 and 160 cu. yds. (59.6and 122.33 cu m) per hour, making it an idealaddition to any team working in a pit, quarry,

or any large-scale construction project."I am very excited about our new relation-

ship with MB America and am looking for-ward to sharing their amazing technology asthe Washington State Dealer,” Lynn Barker,owner of Barker Enterprises.According to MB, their attachments allow

businesses to reuse the materials immediatelyat the job site and provide a greener option inrecycling waste materials, which often sit formonths before businesses can transport themto a crushing plant or to bring one in. Theprocess can take weeks to get rid of waste andcost businesses thousands of dollars. With thecrushing and screening attachments, busi-nesses can save time and money to get the jobdone, while reducing waste and trucking.MB offers crushing and screening attach-

ments, grapples, universal quick couplingsand iron separators for a wide scope of workthat includes demolition and excavation, roadwork, quarries, mines, pipeline work andenvironmental reclamation projects.For information, visit

www.mbamerica.com, or call 855/622-7874.(This story also can be found on

Construction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)

The world’s largest crusher bucket, the BF150.10, was displayed for attendees toview.

IROCK Crushers’ TS-409 openstyle feeder track screening plant,one in a line of five IROCK mod-els, is designed for small- to mid-size producers who need a moreeconomical, more compact screen-ing plant and do not require asmuch capacity.The TS-409 is suitable for mate-

rials such as topsoil, mulch, sandand gravel, asphalt, coal, limestoneand demolition debris. It is pow-ered by a 66.2 hp (49.3 kW) Deutzengine and is capable of processingmaterials at a rate of up to 300 tph(272 t). In terms of transportation,the equipment can be loaded onto atrailer to move from site to site, andhas a set-up time of 10 minutes orless, according to the manufacturer.The smallest screening plant in

its class, the TS-409 features anopen-style hopper feeder with a5.02 cu. yd. (3.8 cu m) capacity anda 42-in. (106 cm) wide belt feederconveyor. Capable of accuratelyand consistently sizing materials upto 12 in. (30.5 cm) in size, the TS-409 has two 9-ft. by 4-ft. (2.7 by 1.2m) decks for a total of 72 sq. ft. (6.7

sq m) of screening area. Thisdesign allows users to produce andsort products in up to three differentsizes, and the decks can be inter-

changed so customers have morecontrol over end-product size.Although the TS-409 is one of

very few smaller tracked screeners

on the market, the unit remainsrobust with features such as 15.7in. (400 mm) wide crawler tracksand an onboard 42-in. oversized

Chevron belt conveyor with astockpiling height of 11.5 ft. (3.5m). The entire working unit meas-ures just over 41 ft. (12.5 m) long.Design features and component

options further enhance themachine’s durability and flexibilityand provide end users more cus-tomization control. A 42-in. rubberbelt feeder is standard on the unit,but customers can substitute aHardox-lined apron feeder toimprove longevity in more ruggedenvironments. Optional radio-con-trol tracks can provide operatorsthe convenience and flexibility tomaneuver the unit around a job sitewirelessly. Top deck bofar barsallow producers to retain morevaluable fine material while reject-ing unwanted oversize products.Finally, top-deck punch plates,commonly used in scalping orheavy-duty screening applications,also are an option that prolongsscreen life.

(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

IROCK TS-409 Proves Ideal for Smaller OperatorsThe TS-409 is suitable for materials such as topsoil,mulch, sand and gravel, asphalt, coal, limestone anddemolition debris.

Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • September 19, 2015 •

Makes tough scalping jobs

look easyNew Lokotrack® ST2.8™ mobile scalping screen

The Lokotrack® ST2.8TM track-mounted scalping screen sets a new standard for transportability, capacity and accuracy in mobile scalping screens. It is the perfect choice for recycling applications and Lokotrack® multistage crushing processes, helping you transform even the toughest feed material into pro� t. Contact your local Metso distributor today.

www.metso.com/lokotrack

WESTATEwww.westate.com

3809 Hwy. 312Billings, MT 59105

800-999-6676Fax: 406-373-6553

CRISP INDUSTRIES, INC.

www.crispindustries.com323 Energy Way

Bridgeport, TX 76426940-683-4070800-315-0871

Fax: 940-683-2181

Seguin, Texas 78155830-372-1110

CUTTING EDGE SUPPLY

234 East O StreetColton, CA 92324

800-949-9014Fax: 909-825-4569

Phoenix, AZ800-729-1473

N. Las Vegas, NV702-649-1303

COMPASS EQUIPMENTwww.compassequip.com4688 Pacific Heights Rd.

Oroville, CA 95695530-533-7284530-533-8610

Fax: 530-533-7657

WHEELER CRUSHING SYSTEMSwww.wheelercat.com/crushing

[email protected]

451 North Lund HighwayCedar City, UT 84720

5300 West Wheeler WayHurricane, UT 84737

239 North 1800 WestLindon, UT 84042

95 North 1000 WestLogan, UT 84321

1831 S. Highway 191Moab, UT 84532

2366 South 1900 WestOgden, UT 84401

1345 South State StreetSalina, UT 84654

1345 South 1500 EastVernal, UT 84078

4901 West 2100 SouthSalt Lake City, UT 84120

4428 E Trent Ave.Spokane, WA 99212

800-541-0754509-535-1654

Fax: 509-534-6741

22431 83rd Ave SKent, WA 98032800-669-2425253-872-3500

Fax: 253-872-3519

19444 Ivan Street SWRochester, WA 98579

800-304-4421360-273-4284

Fax: 360-273-4290

5241 N.E. 82nd AvePortland, OR 97220

800-950-7779971-222-1710

Fax: 503-255-1553

4610 Cloudburst WayEugene, OR 97402

800-826-9811541-688-7321

Fax: 541-688-2241

1257 West AmityBoise, ID 83705800-221-5211208-336-8570

Fax: 208-336-8616

2735C Tucker CourtJerome, ID 83338

800-221-5211208-324-4522

Fax: 208-324-8034

2666 Garrett WayPocatello, ID 83201

800-829-4450208-233-5345

Fax: 208-235-9658

MODERN MACHINERYwww.modernmachinery.com


Haver & Boecker, a leading manufactur-er in processing, storage, mixing, packing,filling, palletizing and loading systems,named Steve Fair its screen media divisionmanager earlier this year. He brings 21years of industry experience at Haver &Boecker to his new role.

“I have been fortunate enough to workwith great people, colleagues and customerswho have shown and taught me a lot,” Fairsaid. “During my time at Haver & Boecker,I have seen a lot of challenging screeningapplications. Those challenges, and theirsolutions, gave me the advanced tools need-ed to help customers at this level.”

Fair said that finding new methods tosolve challenging screening applications isthe most exciting part of the job. Hebelieves every application is different andthat most applications can be improved insome capacity.

As screen media division manager, Fairwill travel with sales representatives andwork with their customers to identifyscreening challenges, including blinding,pegging, premature screen wear and carryover or contamination of screened materi-

als. He will help mining and aggregate cus-tomers improve their screening applica-tions and find ways to increase screeningefficiency.

Since joining the company in 1994, Fair’sroles included working as a shear helper andthen shear operator on the manufacturingside before transitioning to the office side,where he processed equipment orders. Afew years later, he became the expeditor andthen shop foreman. In 2000, he accepted therole of certified sales manager for Haver &Boecker’s Ontario region, an area for whichhe still manages sales. During his time withthe company, he also led the developmentteam for the Haver & Tyler Pro-Deck sys-tem, which includes the company’s signa-ture vibration analysis technology, Pulse,along with machine inspections and screenmedia audits to eliminate premature failure,increase production and reduce cost per tonfor customers.

For more information, call 800/325-5993 or visit www.havercanada.com.

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)

Haver & Boecker Appoints Steve FairScreen Media Division Manager

Steve Fair is Haver &Boecker’s new screen divi-sion manager. He will workwith customers to developsolutions for screeningapplications and find waysto increase their screeningefficiency.

www.petersoncat.comNorthern California

888-738-3776Oregon/Southern Washington

800-452-7676

Chico, CARedding, CAFortuna, CAWillows, CAWillits, CA

Santa Rosa, CASan Martin, CA

San Leandro, CAEugene, OR

North Bend, ORKlamath Falls, OR

Redmond, ORMedford, ORAlbany, OR

Portland, ORSalem, OR

The Dalles, ORLongview, WA

www.wagnerequipment.comAlbuquerque, NM

505-345-8411Aurora, CO

303-739-3000Burlington, CO719-346-7880

Colorado Springs, CO719-635-1669Durango, CO

970-259-2001El Paso, TX

915-821-7651Farmington, NM505-327-5331

Grand Junction, CO970-242-2834

Hayden, CO970-276-3781

Hobbs, NM575-393-2148

Pueblo, CO719-544-4433Windsor, CO

970-278-1750

www.tractorandequipment.comBillings, MT

406-656-0202Billings-Southgate, MT

406-245-4426Bozeman, MT406-585-5800

Great Falls, MT406-761-7900

Helena, MT406-442-2990Williston, ND701-572-8377Worland, WY307-347-4747

www.ncmachinery.comSeattle, WA

425-251-5800Chehalis, WA360-748-8845

Fife, WA253-896-0878Monroe, WA

360-805-6000Mount Vernon, WA

360-424-4292Port Angeles, WA

360-452-9222Wenatchee, WA509-886-5561Yakima, WA

509-248-2371Anchorage, AK907-786-7500

Dutch Harbor, AK907-581-1367Fairbanks, AK907-452-7251

Juneau, AK907-789-0181

Prudhoe Bay, AK907-659-9600

Wasilla, AK907-352-3400


www.holtcat.com800-275-4658

Austin, TX • Bridgeport, TXCorpus Christi, TX • Fort Worth, TX

Irving, TX • Laredo, TXLewisville, TX • Longview, TXNorth Dallas, TX • Pflugerville, TXSan Antonio, TX • Sonora, TXTexarkana, TX • Tyler, TX

Victoria, TX • Waco, TX • Weslaco, TX

www.johnson-machinery.comRiverside, CA951-686-4560Indio, CA

760-342-1597Murrieta, CA

951-696-1063Hesperia, CA

760-947-0967

www.mustangcat.comHouston, TX

713-460-2000Beaumont, TX409-892-8412Bryan, TX

979-775-7368Bryan, TX

979-775-0639Channelview, TX281-452-7368Conroe, TX

936-756-1110El Campo, TX979-543-3389Freeport, TX

979-233-7368Houston, TX

713-462-9993Houston, TX

713-228-7368LaMarque, TX409-935-7000Lufkin, TX

936-639-5551Lufkin, TX

936-632-6775Nederland, TX409-722-7368


Sturtevant Unveils 100 Percent Mobile Air Classifying Plant

Many aggregate and sand producers own multiple quar-ries, and a portable air classifier eliminates the cost of own-ing and maintaining multiple stationary classifiers. And formajor paving projects it is often more economical to movethe air classifier to a quarry nearer to the job site or to the jobsite itself than to haul the de-dusted manufactured sand. “Many asphalt companies also own or lease portable

asphalt plants that normally require adjoining portableequipment for crushing, screening and fines handling,”according to Joe Muscolino, senior project manager ofSturtevant Inc., Hanover, Mass. “A portable air classifier negates the need for a wash plant

where water is not readily available or where waste waterdisposal is a problem. But there has not been a mobile airclassifier that could go from transport to production withoutthe cost and delay of special lifting equipment. People havebeen asking us for years to design a portable plant to solvethis serious problem, he said.Sturtevant Inc. has introduced a self-contained, 100 per-

cent mobile air classifying plant with integral collapsibleconveyors, enabling parking to processing in one hour orless. The Whirlwind air classifier and conveyors hydrauli-cally unfold for setup and fold away for breakdown andtransport, with no cranes, boom trucks, front-end loaders orspecial crew needed for any part of the operation. Simplypush a button. Dual hydraulic cylinders provide smooth,steady raising and lowering of the Whirlwind air classifierand the integral, collapsible feed and dual discharge convey-ors. The plant is mounted on a rugged chassis frame with tri-

axle suspension for stable travel on highways or back roads.The plant is designed and constructed for vibration-freeoperation and long service life with low maintenance and thecompact design features a low transport height (13 ft. 5 in. [4m]), short trailer transport length (61 ft. 9 in. [18.8 m]) andtrim transport width (12 ft. 7 in. [3.8 m]) for easy maneuver-ing on roadways and at job sites. Feed capacity is 30 to 90tons (27 to 81.6 t) per hour with a 50 hp variable-frequencymotor for low energy consumption. “Producers tell us they want a portable unit large enough

for high feed rates, but compact and completely mobile tokeep transportation costs reasonable,” Muscolino said. “We

estimate that our ample tph range and compact, totally self-contained design will keep transportation costs 40 to 50 per-cent lower than if we had designed a larger plant with unat-tached conveyors that require assembly.” Other features requested by aggregate and asphalt pro-

ducers include a long, high discharge conveyor for greaterstockpile heights of de-dusted manufactured sand, and a feed

conveyor intake hopper that is low to the ground and can befed by a front-end loader, eliminating the need for an inter-mediate conveyor. Also, the feed hopper is located behindthe trailer rear wheels to prevent spillage of feed materialonto the chassis where it could cause damage and requireclean-up. The smaller side conveyor is for byproduct fines.For safety and nuisance dust control, all three belt con-

veyors are covered and can be easily vented. In addition, thegravity feed inlet at the top of the classifier is under a slightvacuum to prevent airborne nuisance dust during materialtransfer. The conveyor covers also help reduce moisture dur-ing rain to ensure efficient performance. The air classifier isdesigned for dry operation; material moisture preferablyshould not exceed 2 to 3 percent, with 4 to 5 percent as max-imum for most materials.The Sturtevant Whirlwind air classifier can eliminate the

need for screening, cyclones, bag houses or wet washing.The unit has an automatic lubrication system for low main-tenance and a time-tested gear unit drive for long service life. An internal fan lifts minus #200 mesh fines out of the

feed, and removable selector blades within the housing con-trol the amount of fines to be removed so the process can beadjusted to nearly any material or spec requirement. Anyadditional fine tuning and quick adjustments are made witheasy-to-use speed controls. Adjusted product fineness: mini-mal minus 100, 200, 325 mesh fines.Sturtevant has designed and manufactured a wide range of

material processing equipment since 1888, including threetypes of air classifiers. The chassis-mounted Whirlwind airclassifier is the exact same model that has been in stationaryapplications worldwide for more than 80 years. The compa-ny has manufactured more than 5,000 air classifiers, andwith proper maintenance, Sturtevant air classifiers can last40 to 50 years, according to the manufacturer.“Our customers expect superior quality and long service

life from everything we make,” Muscolino said. “And ourWhirlwind portable air classifier plant and rugged trailer arethoroughly designed and built for the long haul.”For more information, call 800/992-0209 or visit

www.sturtevantinc.com.(This story also can be found on Construction Equipment

Guide’s Web site at www.constructionequipmentguide.com.)

Sturtevant Whirlwind portable air classifier plant is sturdy, compact and maneu-verable on roadways and job sites.

Once parked, the unit unfolds to operational mode in one minute or less with thepush of a button.

The plant utilizes the same Whirlwind air classifier asin stationary applications for more than 80 years.


Celebrate with us. Take 50% off one full deck*

For 50 years (1965 – 2015), Durex® has led the industry in wire screen media innovation. To show our appreciation, we are offering you a unique opportunity with the 50-50-50 Anniversary Appreciation Program.

• 50-year celebration of screen media performance

• 50% off one full deck of any Durex® wire screen media product per customer*

• 50 days to benefit: August 17 – October 5, 2015Minerals

Cutting Edge Supply

ROMCO - MPS

Valley Equipment

WEIR Sales Manager Screening Products

dealer®DurexContact your local

oll Free: +1 855 857 7TToll-Free: +1 855 857 7781-decuttingedge@weir-

, AZ, HICA, NV V, AZ, HI

Cutting Edge Supply

Contact your local

oll-Free: +1 855 857 7781.com-dealer

Cutting Edge Supply

ll E iVV

oll-Free: +1 855 974 4TToll-Free: +1 855 974 4002.com-dealerromco@weir

TX

ROMCO - MPS

oll-Free: +1 855 857 7TToll-Free: +1 855 857 7781

alley Equipment

oll-Free: +1 855 974 4002.com

oll-Free: +1 855 857 7781

oll-Free: +1 855 832 0TToll-Free: +1 855 832 0934valleyequipment@weir

A, ORWWA, OR

alley EquipmenVValley Equipment

oll-Free: +1 855 832 0934.com-dealereir-

alley Equipment

WEIR Sales Manager

WEIR Sales Manager

k ocee dnn os olena0 pm 1umixamni. Mylpps anoitcirtsed rns aeluR*

+1 765 205 2997-dealerbrianjudt@weir

Brian Judt

Screening Products

Appreciation Program.unique opporshow our appreciation, we are offering you a industry in wire screen media innovation. TFor 50 years (1965 – 2015), Durex

50% off one full deckCelebrate with us. T

f x oon beerce snf ok od ns alenam 4 pumi

.com-dealer

Screening Products

Appreciation Program.tunity with the 50-50-50 Anniversary unique oppor

show our appreciation, we are offering you a industry in wire screen media innovation. TFor 50 years (1965 – 2015), Durex

50% off one full deckCelebrate with us. T

tunity with the 50-50-50 Anniversary show our appreciation, we are offering you a

o media innovation. T To has led the ®For 50 years (1965 – 2015), Durex

*50% off one full deckak with us. T Take

tunity with the 50-50-50 Anniversary

ake

gnr EieWf s okramedartd eretsigere tro agoR lIEe Whd tnR aIE; W.cnI

n, Ipuory Grrulr Sief Wk oramedartk aramedars a tX iERU. Ddevreser

ory Grrulr Sie, W501t © 2hgirypoCe ilbaliavy alnr oeff. Ostnemeerga

r ng oniciry ptlaicepr sehto oy tlppam dargor” P.margorn PoitaicerppA

5-05e “taty slraelt csus mredrl olAcrue pn ban coitacfiicepe smae sht

k ocee dnn os olena0 pm 1umixam

•

•

•

.dts Lecivreg Snireenigr o/dns akramedare t

p uorW GHd Wn. acnd eretsiger ro/dns thgil rl. Acn, Ipuo

. setatd Setine Uhn tt nuoccl aanoitar nt os neot dnuocsim d

y rarevinn0 A5-05. remotsur ced pesahc

f x oon beerce snf ok o

50 days to benefit: August 17 – October 5, 2015•

media product per customer*50% off one full deck of any Durex•

50-year celebration of screen media per•

50 days to benefit: August 17 – October 5, 2015

media product per customer* wire screen®50% off one full deck of any Durex

formance50-year celebration of screen media per

50 days to benefit: August 17 – October 5, 2015

wire screen

formance

Minerals


REMU USA Inc. +1 888 600 0018 [email protected]

www.remu.fi/Crossover

SB Module: Blade Screen

SC Module: Screener Crusher

SV Module: Vibrating Screening

Crossover makes work easier, enabling you to:

Accomplish various types of work with one bucket

Process different materials, e.g. topsoil or compost

Alternate between crushing and screening

Change the particle size when screening Watch XOin action!

CROSSOVERCROSSOVERCROSSOVERNow’s the time to switch to the world’s Most versatile screening bucket.

Email or call us for more information!

Cans From Race Fans…

Bandit Industries SupportsLocal Food Drive Initiative

Bandit Industries is proud to be a sup-porter and sponsor of the annual Cans FromRace Fans food drive that merges the gen-erosity of racing fans with the need of alocal soup kitchen. Over the last eight years,more than 60,000 pounds of food and thou-sands of dollars have been raised and donat-ed in Isabella County, Mich., because of theunwavering generosity of the IsabellaCounty community. For the last six years, the money and food

has gone to benefit the Mt. Pleasant-basedIsabella Community Soup Kitchen, a non-profit that prepares more than 100 meals sixdays a week to help feed the hungry inIsabella County. Cans From Race Fans isheld every April at the parking lot of Ric’sFood Center in downtown Mt. Pleasant.The most recent food drive in April

resulted in 3,280 pounds of food beingdonated to the Isabella Community SoupKitchen. That food will be used to cookbreakfast and lunch for people from allwalks of life, said ICSK Executive DirectorKim Friedrich. “It’s just really wonderful,” she said.

“The support from Cans From Race Fansand Bandit is incredible. It’s a great group ofpeople working together for such a worthycause. We can’t express our thanks enoughas we all work together to make sure every-one in our community has enough to eat.”Cans From Race Fans is starting to take

off around the Midwest, said organization

founder and dirt track racer Alvie Haynes.Dirt tracks throughout Michigan, Ohio andIndiana are holding food drives for localfood kitchens under the Cans From RaceFans banner. In every event, 100 percent ofthe food and cash donated at the events arepassed on to local organizations. “In Michigan alone, we’ve done over

100,000 pounds in the last eight years,” hesaid. “If we get dirt-track racing fans togeth-er, there’s no limit to the good we willaccomplish. Our goal is to have every dirttrack in the United States get involved.”With so many racing fans part of the

Bandit family, it made perfect sense forBandit to get involved with the food drive.“Looking back at the eight years of our

partnership with Cans From Race Fans,Bandit swells with pride knowing thatwe’ve been a part of such an amazingorganization,” said Aaron Sorrels, Bandit’smarketing manager. “We’ve been a sup-porter in the annual food drive, helpingthem in any way we can. But the real heroesare the people who come out and supportCans From Race Fans and donate food andmoney. It’s their continuing participationthat makes the food drive such a success.”For more information, call 800/952-0178

or visit www.banditchippers.com.(This story also can be found on


Bandit Industries is a supporter and sponsor of the annual Cans From Race Fansfood drive that merges the generosity of racing fans with the need of a local soupkitchen.


Purpose-builtfrom the ground up byMaterial handlers from SENNEBOGEN – 44,000 lbs. to 750,000 lbs.

Simple design… Lift more. Move faster. Save fuel. Run longer. , 0 0 0 44 . , l0 0 0 0 75 7 o ts b l .sbl

S i m p l e d e

e s i g n … L i ft ft mor

re . Mov e faster.

. Sa v e f u e l . Ru n

n longer.

Modern Machinerywww.modernmachinery.com

Spokane, WA800-541-0754

Kent, WA800-669-2425Rochester, WA800-304-4421Portland, OR

800-950-7779Eugene, OR

800-826-9811

Boise, ID 800-221-5211Pocatello, ID

800-829-4450Missoula, MT800-332-1617Kalispell, MT

800-434-4190Billings, MT

800-735-2589

Waukesha-Pearce Industries, Inc.Corporate Office: 12320 So. Main

Houston, TX 77035713/723-1050 • Fax: 713/551-0798

www.wpi.com

Tomball, TX281/351-9016

Kilgore, TX903/984-2011Port Arthur, TX409/721-5305

Corpus Christi, TX361/884-8275

Edinburg, TX956/386-0107

San Antonio, TX210/648-4444Pflugerville, TX512/251-0013

Buffalo, TX903/322-7150

ASCO (Associated Supply Co.)www.ascoeq.com

2012 East Slaton Rd.Lubbock, TX 79404

806-745-2000Amarillo, TX

806-732-8386Odessa, TX

432-337-2823Perryton, TX

806-435-7773

Midland, TX432-685-9999

Wichita Falls, TX940-687-2726

Abilene, TX325-698-2726San Angelo, TX325-655-5666


CRUSHING

MATERIAL HANDLING

SCREENING TRACKS

WASHING & CLASSIFYING

Loading/UnloadingConstruction Infrastructure EnergyAggregate MiningRecycle www.kpijci.com

The complete source for equipment in the aggregate, construction and recycling industries.

www.modernmachinery.com

www.powermotivecorp.com

GNHISURC

EERCS

GNINEE

SCKART

y

REATMDLNAH

LAIRGNIDL &GNHISAWWA

GNIYFISSALC

C

Colorado Springs CO 80906 Dura

p p

ango CO 81301

Crush. Classify. Profit.

CRUSHING PLANTS

Closed-circuit PLANTS

SCREENING PlantsWe Call It EXPERTISE. You Call It PEACE OF MIND.

IROCK knows the demands of your industry. Not just because we hear it, but because we’ve seen it and lived it, too. Our team of experts has years of hands-on experience working in your business and providing superior service. So when it comes to increasing efficiencies, reducing wear and boosting your bottom line, we're confident we have the right answers.

For more information, call 866-240-0201 or see our equipment in action at www.irockcrushers.com.

w w w . i r o c k c r u s h e r s . c o m


Taking crushing

to a whole new level

Lokotrack® LT106™The Lokotrack LT106 jaw plant, featuring the proven Nordberg® C106 jaw crusher, is taking primary crushing to a whole new level. New features and an advanced process control system deliver superior productivity and e� ciency. Safe and simple to operate, the LT106 provides you with a compact, highly mobile option to meet your production requirements . For more information, contact your local Metso distributor today.

www.metso.com/lokotrack

WESTATEwww.westate.com

3809 Hwy. 312Billings, MT 59105

800-999-6676Fax: 406-373-6553

CRISP INDUSTRIES, INC.

www.crispindustries.com323 Energy Way

Bridgeport, TX 76426940-683-4070800-315-0871

Fax: 940-683-2181

Seguin, Texas 78155830-372-1110

CUTTING EDGE SUPPLY

234 East O StreetColton, CA 92324

800-949-9014Fax: 909-825-4569

Phoenix, AZ800-729-1473

N. Las Vegas, NV702-649-1303

COMPASS EQUIPMENTwww.compassequip.com4688 Pacific Heights Rd.

Oroville, CA 95695530-533-7284530-533-8610

Fax: 530-533-7657

4428 E Trent Ave.Spokane, WA 99212

800-541-0754509-535-1654

Fax: 509-534-6741

22431 83rd Ave SKent, WA 98032800-669-2425253-872-3500

Fax: 253-872-3519

19444 Ivan Street SWRochester, WA 98579

800-304-4421360-273-4284

Fax: 360-273-4290

5241 N.E. 82nd AvePortland, OR 97220

800-950-7779971-222-1710

Fax: 503-255-1553

4610 Cloudburst WayEugene, OR 97402

800-826-9811541-688-7321

Fax: 541-688-2241

1257 West AmityBoise, ID 83705800-221-5211208-336-8570

Fax: 208-336-8616

2735C Tucker CourtJerome, ID 83338

800-221-5211208-324-4522

Fax: 208-324-8034

2666 Garrett WayPocatello, ID 83201

800-829-4450208-233-5345

Fax: 208-235-9658

MODERN MACHINERYwww.modernmachinery.com

WHEELER CRUSHING SYSTEMSwww.wheelercat.com/crushing

[email protected]

451 North Lund HighwayCedar City, UT 84720

5300 West Wheeler WayHurricane, UT 84737

239 North 1800 WestLindon, UT 84042

95 North 1000 WestLogan, UT 84321

1831 S. Highway 191Moab, UT 84532

2366 South 1900 WestOgden, UT 84401

1345 South State StreetSalina, UT 84654

1345 South 1500 EastVernal, UT 84078

4901 West 2100 SouthSalt Lake City, UT 84120


Authorized Doosan Dealers

ALASKACraig Taylor

Equipment CompanyAnchorage

907-276-5050

Soldotna907-262-5977

Wasilla907-376-3838

www.craigtaylorequipment.com

ARIZONADitch Witch of Arizona

Phoenix602-437-0351 • 888-316-3242

Tucson520-579-0261 • 888-316-3242

www.ditchwitchaz.com

CALIFORNIABerchtold Equipment Company

Bakers�eld661-323-7817 • 800-691-7817

Santa Maria805-922-7905 • 800-549-3673

www.berchtold.com

Bobcat of SacramentoSacramento209-466-9631

Mega Machinery Co., Inc.Lakeside

619-561-7832

RGW Equipment SalesLivermore

925-606-2403www.rgwequipment.com

Scott EquipmentFontana

909-822-2200 ∙ 800-316-0327www.scottequip.com

COLORADOH & E Equipment Services, Inc.

Henderson303-289-2201

www.he-equipment.com

MONTANA Bobcat of Big Sky, Inc.

Billings406-252-0822

Northwest Parts & RiggingColumbia Falls406-892-1778

doosan.nwparts.com

NEVADABobcat of Reno

Reno888-445-0146

OKLAHOMABobcat of Elk City

Elk City580-339-9075

www.bobcatofelkcity.com

H & E Equipment Services, Inc.Oklahoma City

405-789-7368

Tulsa918-445-2666

www.he-equipment.com

OREGONFeenaughty Machinery Co., Inc.

Portland503-282-2566 ∙ 800-875-2566

www.feenaughty.com

TEXASTexas Timberjack, Inc.

Lu�in936-634-3367 ∙ 877-363-1143

www.texastimberjack.com

WASHINGTONFarmers Equipment Company

Burlington360-757-6084 ∙ 888-855-4982

www.farmersequip.com

Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2015 Doosan Infracore Construction Equipment America. All rights reserved. 0915450

9526-2709natodolS506-72-709agrochnAo C CotnemipquEya T Tagg TiaCr

SKALA

rs

oCewhtroN

4

t oacboBM

779na

5050eag

yanmporlo

ASKelae Dnasoo DedzirohtuA

sllabia Fumlogniggis & Rtrat Ps

2280-252-60sngilliB

.cn, Iykg Sif Bt oA ANTTANNOM

noscTu88 8 •1530-734-206xinePhof Ah octih WctiD

ONZRIA

iuqerolyatgiar.cwww8-376-3709allisWa95-26-2709

boBKO

888

oBN

sood4

242-361-38x

anozirf AAON

mo.ctnempi838

a779

ytik Clf Et oacAOMHALK

6410-544-888onRe

one R of f RtabcADVAEN

moc.starpw.nnas8771-2-89604

oldtchreb.www005 • 8097-229-508raa MtnaS00 8 •71873-23-166

eers�kaBemipqu EdlldotchrrcheB

ROLIFAC

htciwhtcid.www88 8 •1620-975-025

.hewww9

4klOpiuqH & E E

.bwww5

boB

moc.old3763-945-0

iar7187-196-0

dleyanmpo Ctne

AINR

moc.za242-361-38

moc.tnepmiuqe-.he6662-544-819

aslTu863-798-750y Citamhoakl

.cn, Isecivret Senmp

moc.ytickelfotacbo.b5709-93-308

y Citkk CitElytik Clf Et oac

42-066-259romreviLnemipqu EWW EGR

87-615-961ediskeaLyreinach MageM

966-64-902neamracS

acr Sff S otacboB

-436-693

saxxaeTTe

www25-282-305

yhtgauneeFORE

304er

sellea Stn

23e

.cn I,.o Cy

1396otn

otneamacr

3411-363-777 ∙ 8633-ni�uL

.cn I,ackjrrjebim TSAXTE

mco.ythgunaeef.w6625-578-00 8 ∙6625

dnaltrPo.cn I,.o C Coyy Crenihca Myy M

ONGORE

2-298-2303ersodenH

et SenmpiuqH & E EAOROLC

iuqettcos.www0 8 ∙0022-22-8909

naantoFmipqu EttocS

pmiuqewg.rwww42066259

.www60-775-603

EsrrsemarFSAWWA

te.www-436-693

02nerso

.cn, IsecivreODA

mco.p7230-163-0

natnem

moc.tne304

moc.piquesremarf.2894-558-88 8 ∙4860

notngilruByanmpo C Cotnemipqu

NOINGTHS

moc.kcajrebmitsaxte3411-363-777 ∙ 8633-

epmiuqe-.hewww2-298-2303

moc.tne102

Excavator Finds New Home

“Shipping normally would kill the deal onsomething like that,” he said. “You can get itfor a great price, but then you gotta ship thething, and that’s when that price just goes tothe pot.”

So far, Brock has been cleaning themachine and preparing it for work, althoughhe’s gotten a few phone calls about potentialjobs.

“It’s a 1994 machine, so it’s had 20 yearsor more of…I wouldn’t say neglect, it’s justsomebody not wanting to clean it,” he said.“If it’s there to work, it’s there to work, not tobe a pretty thing, so I’ve been cleaning it,changing the filters, the fluids…probablygonna give it another paint color. Just tryingto make sure that everything that’s supposedto work will work, and not fail on the job. It’sa 20-year-old machine. It’s not going to dolike a brand new machine will, but it’s goodenough to do a big job. The previous ownersaid that he wouldn’t put it on an eight houra day job for six months –— it probablywouldn’t react good to that.”

In the future, Brock hopes to be able toexpand his fleet to be able to work fulltime.

“The more exposure I get with this, I’ll beable to get those jobs where my plans willcome together with other future machinesthat I’m looking at getting,” he said.

Currently on his wish list is a T9-670 NewHolland tractor that is capable of pullingthree 18-yard Rohm scrapers or one K-Tech56-yard scraper.

“I would really like to have a bunch ofLiebherr equipment, probably somethinglike a 954 up to a 984 excavator, a large bulldozer, probably a Liebherr or a Caterpillarfront end loader, with maybe an eight yard

sized bucket on it, and maybe a small fleet ofdump trucks, and maybe an 18- wheeler,”he said. “But I will also have to have somesort of an off-road dump truck, and thatwould be able to get me started where if any-body called me for any type of work, I’d beable to offer something to them. I’m alsolooking at putting in larger excavators, likethe size of a 1900 Hitachi, and a Hitachi2500 style or larger in case a very large jobcomes up.”

The drawback for Brock is that his time-line is a long one.

“I know it’s not a real money maker foranybody that I know of unless they’vealready been established for a decade or soand they have a fleet of tractors,” he said.“So I’m just a single owner and I don’t havea bunch of money to go ahead and get all thisstuff that I need. It sure would be nice to havesome donations. But I am looking at doingsomething with Victor Butler at Liebherr ofAmerica right here in Houston. He has a lotof information about working with heavymining equipment. I’m also looking for aT9-670 New Holland, and I’m working withLary Rosenbaum at Washington CountyTractor in Sealy. He’s keeping me up to datewith people who want to lease those tractorsor buy them, and then he kind of throws myname out there.”

Anyone with information about programsto help Brock get his business started, oranyone who would be interested in helpinghim fund his endeavor is asked to call him at281/798-1037 or [email protected].

(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.) CEG

The machine was delivered from Memphis, Tenn., to purchaser Allen Brock, and cameon an older-style Kenworth with an eight-axle load. The tractor had four sets ofwheels, the trailer had three, and a stinger on the back had another set of wheels thathelped even out the tonnage, allowing it to be shipped in one load rather than two.

EXCAVATOR from page 10


Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2015 Doosan Infracore Construction Equipment America. All rights reserved. | 0915450

RUN STRONG.

Want to run strong equipment?Run Doosan.Request FREE product information: DoosanEquipment.com/RunStrong21


BANE MACHINERY, INC.2449 Manana Rd.Dallas, TX 75220

214/352-2468Fax: 214/353-2460

Tyler, TX903-597-6641

Ft. Worth, TX817/847-5894

4 RIVERS EQUIPMENTColorado Springs, CO1100 E. Cheyenne Rd.

719/475-1100www.4riversequipment.com

Albuquerque, NM505/884-2900

El Paso, TX915/598-1133

Farmington, NM505/326-1101

Fort Collins, CO970/482-7154

Frederick, CO303/833-5900

Hobbs, NM575/392-6923

Pueblo West, CO719/547-3505

SCOTT EQUIPMENT14635 Valley Blvd.Fontana, CA 92335

800/316-0327Fax: 909/822-4850

www.scottequip.com

BEE EQUIPMENT SALES LTD.2506 Slaton HighwayLubbock, TX 79404

806/745-1511Fax: 806/455-0543

C. L. BOYD CO., INC.4220 West Reno Ave.

Oklahoma City, OK 73107800/OKC-BOYD405/942-8000

Fax: 405/945-8569

Ardmore, OK866/720-2693580/224-2693

Lawton, OK800/633-2693580/355-6667


WE’VE GOT EXCLUSIVE FEATURES TO GET MORE DONEWith KOBELCO excavators on

for even the toughest

features in our machines

KOBELCO-USA.COM

TRI-WEST TRACTOR6281 Southfront Rd.Livermore, CA 94551

925-455-8200 • Fax: 925-455-8220www.tri-westtractor.com

Orion Equipment18060 Des Moines Memorial Drive

Seattle, WA 98148800-280-8124

www.orion-equip.com

Amarillo Machinery6100 I-40 E.

Amarillo, TX 79118806-372-7800

www.amarillomachinery.com

BANE MACHINERY, INC.2449 Manna Rd.Dallas, TX 75520214-352-2468

Tyler, TX903-597-6641Fort Worth, TX817-847-5894

www.banemachinery.com

Anderson Machinery Co.6535 Leopard St.

Corpus Christi, TX 78409361-289-6043

Pharr, TX956-781-5995San Antonio, TX210-661-2366

Austin, TX512-272-8133Victoria, TX361-575-8111

Odessa, TX432-561-8933

www.andersonmachinerytexas.com


KOMATSU EQUIPMENTCOMPANY

1486 South Distribution DriveSalt Lake City, UT 84104

801-972-36604460 Pioneer WayElko, NV 89801775-753-7557

3825 Losee RoadNorth Las Vegas, NV 89030

702-399-1004900 Marietta WaySparks, NV 89431775-356-1334

1409 East 3850 SouthSt. George, UT 84790

435-986-100010790 South Highway 59

Gillette, WY 82718307-682-1445405 Jonah Drive

Rock Springs, WY 82901307-686-1300

ROAD MACHINERYwww.roadmachinery.com

Gilbert, AZ480-545-2400Phoenix, AZ602-252-7121Prescott, AZ928-778-5621Tucson, AZ800-989-8681

Bakersfield, CA661-695-4830Fremont, CA510-659-1903Fresno, CA559-834-3215

Mojave, CA - Coming Soon

Perris, CA909-355-3600

Pico Rivera, CA562-699-6767Redding, CA530-229-3820

Sacramento, CA916-375-3540

Albuquerque, NM505-345-8383

Farmington, NM505-324-8601

Interstate Trailers Appoints NewPresident, Announces Promotions

Interstate Trailers’ Board ofDirectors has appointed Matt Laws,formerly national sales manager, topresident, effective June 1, 2015.

Laws brings nearly 17 years of expe-rience from a wide range of positionswithin Interstate to his new role.

“I am excited to begin this new andchallenging chapter,” said Laws. “Ilook forward to working with our teamat Interstate as well as our outstandingdealer network to continue to grow andimprove the Interstate brand”.

Laws joined Interstate in 1998 as anassistant in the parts room. He was thenpromoted to parts manager, followedby sales representative of Interstate’srental dealers. He had been nationalsales manager since 2003.

Also, Brian Schroder was appointedchief operating officer. Schroder willoversee all aspects of production atInterstate Trailers. He brings 19 yearsof experience in the fields of truck andtrailer manufacturing, maintenance,design and after-sales support. Heexcels at product improvement andefficient manufacturing combined withstrong leadership of the productioncrew, according to the company.

Schroder began his career atInterstate Trailers in 2003 as parts andservice manager and later, becameplant manager.

In 2012, he designed and construct-ed the Interstate air ramp system, whichhas been well-received by the marketand is considered by many in the indus-try to be the strongest and safest airactuated ramp system available.

Finally, Sean Hutcherson has beenappointed chief financial officer, afterserving as the controller for more thanseven years. Hutcherson oversees theaccounting department with someemphasis on human resources.

This new role expands on hisresponsibilities regarding cash flow,investment strategy, budget and finan-cial statement preparation. Prior to join-ing Interstate, Hutcherson was a pric-ing analyst for Rockwell Collins.

For more information, visitwww.interstatetrailers.com


Matt Laws, Interstate Trailers’ new president.

Brian Schroeder, newly appointed chief operating officer.

Sean Hutcherson takes on a new role as chief financial officer.


MADE WITH PASSION AND PRIDE

KIRBY-SMITHMACHINERY INC.

6715 W RenoOklahoma City, OK 73137

800-375-3339405-495-7820

Fax: 405-787-597312321 E. Pine Street

Tulsa, OK 74116800-375-3733918-438-1700

Fax: 918-437-7065Abilene, TX877-577-5729325-692-6334Amarillo, TX800-283-1247806-373-2826

Dallas, TX800-753-1247214-371-7777Ft. Worth, TX877-851-9977817-378-0600Lubbock, TX866-289-6087806-745-2112Odessa, TX877-794-1800432-333-7000

www.kirby-smith.com

POWER MOTIVECORPORATION

DENVER HEADQUARTERS5000 Vasquez Blvd.Denver, CO 80216888-271-3308

Colorado Springs, CO888-271-3308

Grand Junction, CO888-271-3308Milliken, CO888-271-3308Durango, CO888-271-3308

Cheyenne, WY888-271-3308

www.powermotivecorp.com

WAUKESHA-PEARCE INDUSTRIES, INC.

12320 S. MainHouston, TX 77035713-723-1050

Fax: 713-551-0798Tomball, TX281-351-9016Kilgore, TX903-984-2011

Port Arthur, TX409-721-5305

Corpus Christi, TX361-884-8275Edinburg, TX956-386-0107

San Antonio, TX210-648-4444

Pflugerville, TX512-251-0013Buffalo, TX903-322-7150www.wpi.com

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 19, 2015 • Page 31 • September 19, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt® Spin Ace® Excavators are packed with all the power, productivity,

Extended service intervals

Model # Operating Weight Net hp @ rpm Tail Swing

*75 X3 and 80 X3 engines are Final Tier 4

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • September 19, 2015 • Page 30 • September 19, 2015 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Link-Belt® Spin Ace® Excavators are packed with all the power, productivity,

Extended service intervals

Model # Operating Weight Net hp @ rpm Tail Swing

*75 X3 and 80 X3 engines are Final Tier 4


Sacramento Kings’ Golden 1 Center Reaches Milestoneinstallation of the arena’s structuralsteel frame and 340-ft.-long (103.6m) roof trusses. To complete these stages of con-

struction — along with demolitionand foundation-related work —contractors utilized equipmentconsidered uncommon for down-town Sacramento projects. “The equipment is perhaps the

most interesting thing [about theproject],” said Robert Synhorst,project manager of Icon VenueGroup, the owner’s representativeon the project.Synhorst cited Liebherr LR

1300 and Liebheer LR 1200crawler cranes and a Cat 5110bmass excavator as stand out equip-ment, with the latter playing a largepart in the project’s early stages.

DemolitionTo make way for the arena a

mall featuring a large Macy’sbuilding, along with a multi-storyoffice building was demolishedlast summer. The project’s overallfootprint accounts for roughly fourcity blocks.Responsible for demolition

operations was Ferma Corp., acontractor known for recycling atleast 95 percent of a project’s con-struction debris and materials. The Cat 5110b excavator was

equipped with a high reach boomand tore down pieces of variousbuildings with the help ofhydraulic breaker and shear attach-ments, which can process rebar,concrete and structural steel.While the excavator worked, a

mobile crane held up a large meshscreen used to stop falling debrisfrom reaching nearby streets.

FoundationAs part of demolition opera-

tions, an existing, two-story under-ground parking garage wasremoved along with its foundation.Once contractors reached sub-grade they excavated down anadditional 10 to 20 ft. (3.3 to 6 m)and hauled that dirt off site. Prior to driving any piles for the

arena’s foundation, significantdewatering of the excavation sitehad to occur. According toSynhorst, contractors used a sys-tem where vacuum-type wellswere “dotted” around the perime-ter of the area in order to lower the

water table. Malcolm Drilling was then able

to commence pile-driving opera-tions, however; because of unsta-ble soil conditions and high groundwater the contractor installedroughly 1,000 augercast (cast-in-place) drill piles rather than con-ventional piles. If Malcolm didn’tuse this method, casing or drillingslurry would have been required tostabilize the bore hole. According to the contractor,

these augercast piles can beinstalled efficiently with modernhigh-torque hydraulic drilling rigsup to a depth of 115 ft. (35 m) and48 in. (122 cm) in diameter. The method utilizes one contin-

uous auger, which is drilled intothe ground. The soil on the augerprevents the surrounding groundfrom caving during the drilling andgrouting process. After reaching pile tip, the auger

is extracted while fluid concrete orgrout is pumped through the hol-

low stem auger to fill the holeunder positive pressure. Rebar isinstalled into the completed pileafter the auger is removed.Following installation, the piles

were capped with concrete and atwo-ft. (.6 m) thick “mat slab” waspoured on top. This slab serves asthe arena’s main foundation. On topof the slab a two-foot thick sectionof aggregate base was laid, whichcreated an area to run utility plumb-ing, Synhorst said, adding the pour-ing of an 8-in. (20.3 m) thick cap

slab followed. This is the slab thebasketball court will rest on.

Steel Frames, TrussesErection of the arena’s steel

frame has been the focus of twoLiebherr crawler cranes this entireyear. The LR 1300 and the LR1200 — known for its compact 9.8ft. (3 m) transport width — haveerected steel from the inside out,working in the bowl of the arena.To allow the cranes to escape thebowl, leave-out bays were created

on the tight site.Once roughly 50 percent of the

arena’s frame was erected, theassembly of the building’s 340-ft.(103.6 m)-long roof trusses began.However, before this could beginthese large trusses had to be trans-ported nearly 50 mi. (80.4 km) bySchuff Steel, the project’s structur-al steel contractor and truss manu-facturer.Each weighing roughly 270,000

lbs. (122,470 kg) the two trusseswere separated into three compo-nent sections apiece at Schuff’sproduction plant in Stockton, Calif. While two major freeways con-

nect Sacramento to Stockton, theseroutes could not be used, as theyfeature overpasses that were toolow for the trucks used to transportthe trusses. The solution —Schuff’s truck drove country roadsinto the city flanked by escorts.“Getting those delivered was a

major undertaking,” Synhorst said. At the project’s site Schuff had

to assemble scaffolding/shoringtowers to support the truss while itwas raised into place, bolted andinstalled. Workers did not accessthe towers.

What RemainsThis fall, the exterior façade

work will be a focal point.Designed by architectural firmAECOM, the outside of the arenawill feature metal glass panelsinstalled in an “in and out” designthat resembles diamonds orspikes/pyramids sticking out fromthe arena. The steel that supportsthe panels also will have to mimicthis in and out form.Another interesting design

aspect of the arena are the largehangar doors that will be incorpo-rated on one side of the building.These doors, which can fold upinto themselves, are intended tocreate an open space on one end ofthe arena’s bowl, allowing fresh airto enter the arena. No word on ifthese doors will remain open dur-ing games or opposing team’s freethrow attempts.The inside finishes of the arena

will mainly be all that remains fol-lowing façade work, with the proj-ect slated for opening of the Kings2016-2017 season.

(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)CEG

ARENA from page 1

Golden 1 Center photoAt the project’s site, Schuff had to assemble scaffolding/shoringtowers to support the truss while it was raised into place, boltedand installed.

Golden 1 Center photoOnce roughly 50 percent of the arena’s frame was erected, theassembly of the building’s 340-ft. (103.6 m)-long roof trussesbegan.

Geo-Boy Brush Cutter Tractor OffersContractors Cutter Head OptionsThe Geo-Boy brush cutter tractor

from Jarraff Industries is available withvarious cutter head options to meet spe-cific application needs. The Geo-Boycan be outfitted with cutter heads frommultiple manufacturers.Jarraff Industries President/CEO

Heidi Boyum said the objective is ver-satility and productivity. “We really want to give end users the

ability to best match their Geo-Boy totheir particular applications. Conditionscan vary greatly from pipeline right-of-way management, for example, to seis-

mic mapping or general land clearingfor construction applications. This waycustomers can select the cutter headoption that best suits their needs andgives them the level of productivity thatthey want.” In addition to multiple cutter head

options, the Geo-Boy is available inboth wheeled and track configurations.Both models are ROPS and FOPS cer-tified. The Geo-Boy also offers a num-ber of safety features including fullLexan, No Mar windows and a rearview camera.

The Geo-Boy has the ability to liftthe cutter head approximately 11 ft.(3.3 m) high and can quickly and effec-tively clear brush and trees up to 12 in.(30.5 cm) in diameter. With two Tier IIIengine options, 220 hp and 260 hp, theGeo-Boy is powerful, maneuverableand fuel efficient.For more information, call 800/436-

2691 or visit www.geo-boy.com.(This story also can be found on

Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)

Pages 33-37For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com

SECT IONAttachments

In addition to multiple cutter head options, the Geo-Boy is available in both wheeled and track configurations.

Putzmeister UnveilsCoupling System Putzmeister America Inc. has introduced a hydraulic cou-

pling system used for creating quicker, easier and cleanerconnections on hydraulic lines that connect pedestals withplacing booms to power the boom arm. The new couplerseasily screw together, coupling and uncoupling while depres-surized.“Not only is the new design easy and convenient, but it’s

also safer to install,” said Bob Weiglein, Putzmeister’s spe-cial applications business manager. “The new couplers willhelp save time on the job site, as they can easily be takenapart and reattached to the placing boom’s hydraulic lines.”For use when disconnecting the boom from pedestal or

truck in placing boom applications, the hydraulic couplingsystem is available on detachable placing booms, makingtruck-to-tower conversions a more efficient process.Additional benefits of the hydraulic coupling system includethe ability to couple and uncouple each line individually, aneasily accessible connection plate, and hose bundles that arere-routed and secured in a streamlined way. Putzmeister’s new hydraulic coupling system is available

on select boom models for new equipment orders. For more information, call 800/890-0269 or visit

www.PutzmeisterAmerica.com.(This story also can be found on Construction Equipment


Putzmeister has introduced a new hydraulic couplingsystem used for creating safer and easier connectionson detach placing booms.

• September 19, 2015 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Make an Impact.

www.bretec.com

Upgrade your breaking technology

[email protected]

saleswest@hydraulicbreakerservices.comwww.hydraulicbreakerservices.com

Scott DavisonSales Manager,Bretec Breakers, North [email protected]

e aakM

.tacpmn Ie a

@.Cwww

brian@512-276-2408,Brian Costello, Sales Director.O. Box 41405, P

Crushing

@ g g

[email protected]

512-276-2408,Brian Costello, Sales Director

TX 78704Austin, .O. Box 41405, igersTCrushing

@ y

y.hydraulicbreakerservices.cwwwsaleswest@hydraulicbreakerser877-514-3600,

92308, CAalleyApple V Valley13462 Central Road, Building #3Hydraulic Breaker Services

ww

[email protected] 404-345-3716Bretec Breakers, North Sales ManagerScott Davison

comrvices.com

13462 Central Road, Building #3

omc.cetreb.ww

[email protected]

AmericaBretec Breakers, North ,

Atlas Copco Expands Range of EC Hydraulic Breakers Atlas Copco has expanded its essential case-mount-

ed (EC) range of hydraulic breaker attachments byadding five small range breakers to the lineup that aresmall enough to fit in limited-access work environ-ments, such as pipe trenches. The new breakers fit 1-to 12-ton (.9 to 10.8 t) carriers and, like the full rangeof EC breakers, give rental centers and contractors afast ROI by simplifying maintenance and operation,according to the manufacturer.The new small range breaker attachments — the

EC 40 T, EC 50 T, EC 60 T, EC 70 T and EC 80 T —excel in day-to-day breaking tasks for small-scaleconstruction and demolition applications. For exam-ple, a carrier operator can lower a small range ECbreaker into a narrow trench to break apart oversizeinstead of digging a wider trench to fit a larger break-er.“These compact case-mounted breakers were

developed for the construction and rental industries,”said Kevin Loomis, Atlas Copco construction toolbusiness line manager. “And their simplicity makesthem easy to use and quick to maintain, which resultsin high utilization rates for rental centers.”The EC breaker attachments feature Atlas Copco’s

box-style mounting systems, which eliminate the needfor removing external fasteners to access components,such as wear bushings and seals, for maintenance. Theresults are expedited turnaround times for mainte-nance, which boosts utilization rates.Operators can use the breakers in noise- and vibra-

tion-restricted work sites because of Atlas Copco’sVibroSilenced Plus systems. These systems isolatepercussion mechanisms from breaker boxes withpolyurethane damping and seal all attachment open-ings to minimize noise and vibrations.The breakers have service weights as low as 209

lbs. (95 kg) and generate impact rates as high as 1,600bpm to deliver effective impact energy to the breakingsurface. With their high power-to-weight ratios,they’re highly effective in demanding applicationssuch as demolition, earthwork, quarrying and trench-ing, according to the manufacturer.Atlas Copco measures the power of its breakers

using the Association of Equipment Manufacturers’foot-pound rating. The rating, which was developedby the Mounted Breaker Manufacturers Bureau,makes it easy for rental centers and contractors tocompare breaker models by reviewing true figurescollected after a certified test procedure.EC breakers also ensure smooth operation through

integrated features such as nitrogen-gas assist. Thenitrogen piston accumulator works with the hydraulicoil to accelerate the piston, which decreases thehydraulic oil demand from the carrier’s hydraulic sys-tems and delivers consistently high-impact energy.For more information, call 800/732-6762 or visit

www.atlascopco.us.(This story also can be found on Construction

Equipment Guide’s Web site at www.constructionequip-mentguide.com.)

Atlas Copco’s newest small range essential case-mounted (EC)breakers fit 1- to 12-ton (.9 to 10.8 t) carriers and are designed foreasy handling and fast maintenance.

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • September 19, 2015 •

Since 1985!

CALL JENNIFER TODAY!(888) [email protected]

www.RBusedParts.com

NEW, USED & REMAN PARTS• Undercarriage

• Arms & Booms

• Cylinders

• Valves

• Transmissions

• Pumps

• Engines

• and More!

ENGINEERED TO PERFORM

CUSTOM HYDRAULIC KITS TO OPERATE ATTACHMENTS

FOR EXCAVATORS & TRACTOR-LOADER-BACKHOES

DURABLE BY DESIGN

Kits to operate most any attachment

Welded tube ends for maximum strength & durability

OEM style ORFS or CD62 4-bolt flange

Higher safety standards

Efficient designs with fewer connections

Add on/custom valves

ypical .200” wall thickness

l .200” wall thickness

• September 19, 2015 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide

Arctic Snow & Ice Products, Inc.

Arctic Sectional Sno-PusherTM

JOIN OUR

DEALER

NETWORK

We support the

We are growing and improving our manufacturing

facility to meet your growing needs. New dedicated

materials processing center, Larger, faster paint

process center and a larger multi station shipping

center. All these improvements were done to service

you, our partner in business. Our commitment to you

is being the best we can be and provide the finest

products in the snow removal industry.

SELL THE MOST SOUGHT AFTER

SNOW REMOVAL PRODUCT

ON THE MARKET TODAY!

WHEN YOU

COMMIT TO US,

ARCTIC COMMITS

TO YOU.

Sectionalsnopusher.com • (888) 2-ICE-SNO

Arctic Snow

Arctic Snow && Ice

Ice Products, Inc.

Ice Products, Inc.

C

ARCTIC

WHEN

COMMIT TO US,

ARCTIC

TO YOU.

COMMITS

YOU

O US, ,

COMMITS

TO YOU.

TO YOU.

TO YOU.

y , p










We support the

y


Arctic Sectional Sno-PusherSectionalsnopusher



Arctic Sectional Sno-Pusherom • (888) 2-ICE-SNO




c.onalsnopusherr.

Arctic Sectional Sno-Pusherom • (888) 2-ICE-SNO




Arctic Sectional Sno-PusherTM

We support the

Since the merger of Compact Equipment Attachments Inc.(CE Attachments Inc.) into Manitou Americas Inc. in 2013,Edge has emerged as the primary brand name associatedwith the attachment needs for Gehl and Mustang products.Over the course of the next few months, the “CEAttachment” name will be removed from Edge brandedproducts and replaced exclusively with the Edge brandname. Despite this transition, the Edge brand will continue toprovide the same products and services. The www.ceattach-ments.com Web site will remain active and up-to-date withEdge branded products during this transition period.

(This story also can be found on Construction Equipment


Changing Times…

CE AttachmentsTransitions to Edge Brand Name

Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • September 19, 2015 •


Air CompressorSolutions, Inc.

TEXASOdessa

(432)�335-5900

Ditch Witch of Arizona

ARIZONAPhoenix

(602)�437-0351

Ditch Witch of Southern Arizona

ARIZONATucson

(520)�579-0261

Sierra Machinery, Inc.

www.sierraelpaso.com

TEXASEl�Paso

(915)�772-0613

NEW MEXICOArtesia

(575)�746-6592

Volvo ConstructionEquipment & Services

CALIFORNIABakersfield

(661)�387-6090Fresno

(559)�834-4420San�Leandro(510)�357-9131Sacramento

(916)�388-2244San Diego/Lakeside(619)�441-3690

Corona(951)�277-7620

Papé Material Handling Inc.

www.papemh.com

OREGONPortland

(503)�639-8910Portland

(503)�286-6400Eugene

(541)�689-7407Medford�

(541)�779-3444

NEVADASparks�

(775)�356-9333

WASHINGTONSeattle�

(206)�722-5800Arlington�

(360)�474-8461Fife�

(253)�926-4386Bellingham�

(360)�756-6572Yakima�

(509)�248-5636Pasco�

(509)�545-1959Wenatchee�

(509)�884-2934Spokane�

(509)�536-7300


ABILENE EQUIPMENT CENTERAbilene, TX 800/382-9271www.anhltd.com

BANE MACHINERY INC.Dallas, TX 800/594-2263Ft. Worth, TX 800/601-2263Tyler, TX 800/594-2200www.banemachinery.com

OKLAHOMA TERRITORY CONSTRUCTION EQUIPMENTOklahoma City, OK 405/917-9191Tulsa, OK 918/835-7200www.oklahomaterritoryequipment.com

APCO EQUIPMENTNorth Las Vegas, NV 800/574-4089www.apcoequipment.com

TRI-WEST TRACTOR, INC.Livermore, CA 925/455-8200www.tri-westtractor.com

RASMUSSEN EQUIPMENT CO.West Valley City, UT 800/453-8032www.rasmussenequipment.com

CLM EQUIPMENT CO. INC.Lafayette, LA 337/837-6693Lake Charles, LA 337/625-5942Baton Rouge, LA 225/677-7838Biloxi, MS 228/396-8740Houston, TX 281/598-2500www.clmequipment.com

BEARD EQUIPMENT CO.Midland, TX 432/694-4530www.beardequipco.com


COLORADOWAGNER EQUIPMENT CO.

www.wagnerequipment.comAurora

303-739-3000Denver

303-433-2727 (Rental)Carbondale

970-963-7368 (Rental)Commerce City

303-286-2300 (Rental)Colorado Springs

719-390-7316 (Rental)719-635-1669

Granby970-328-2080 (Rental)

Gypsum970-328-2080 (Rental)

Hayden970-276-3781

Silverthorne970-262-3788 (Rental)

Fort Collins970-493-5005 (Rental)

Grand Junction970-245-6546 (Rental)

970-242-2834Pueblo

719-544-0088 (Rental)719-544-4433

Steamboat Springs970-871-1990 (Rental)

Windsor970-278-1750 (Rental)

Burlington719-346-7880 (Rental)

(719) 346-5132Durango

970-259-2001 (Rental)970-259-2001

Windsor970-278-1750

OKLAHOMAOCT EQUIPMENT

www.octequipment.comClinton • 580-323-3422

Oklahoma City • 405-789-6812Tulsa • 918-437-5085

TEXASANDERSON MACHINERY CO.

www.andersonmachinerytexas.comCorpus Christi • 361-289-6043

Manor • 512-272-8133Pharr • 956-781-5995

San Antonio • 210-661-2366Victoria • 361-575-8111

GEORGE P. BANE, INC.www.banemachinery.com

Tyler • 903-597-6641

YELLOWHOUSE MACHINERY CO.www.yellowhouse.us

Abilene • 325-677-2291Amarillo • 806-335-1681Lubbock • 806-763-0473Odessa • 432-580-3337

San Angelo • 325-651-3337Wichita Falls • 940-322-3337

MUSTANG CATwww.mustangcat.com

Houston • 713-460-2000Beaumont • 409-892-8412

Bryan • 979-775-7368Bryan • 979-775-0639

Channelview • 281-452-7368Conroe • 936-756-1110

El Campo • 979-543-3389Freeport • 979-233-7368Houston • 713-462-9993Houston • 713-228-7368

LaMarque • 409-935-7000Lufkin • 936-639-5551Lufkin • 936-632-6775

Nederland • 409-722-7368

WAGNER EQUIPMENT CO.www.wagnerequipment.com

El Paso915-493-5005 (Rental)

915-821-7651

Highway Bill…

Lawmakers Face Weighty List ofUnfinished Business, Pending Deadlines By Andrew Taylor and Alan FramASSOCIATED PRESS

WASHINGTON (AP) Congressreturned on Sept. 8 with a critical needfor a characteristic rarely evidentthrough a contentious spring and sum-mer — cooperation betweenRepublicans and President BarackObama. Lawmakers face a weighty list of

unfinished business and looming dead-lines, including a stopgap spending billto keep the government open beyondSept. 30. The most intractable issues —a solution to a yearlong battle overagency budgets and a deal on a long-sought highway bill — have beenkicked to the fall. “It’s going to take a sense of give and

take on both sides,’’ said Rep. TomCole, R-Okla. “The big deal will be,‘Can you come to a deal on transporta-tion, debt ceiling and avoidingsequester?’ So a large budget deal willdetermine, I think, whether or notwe’ve really been successful.’’ Automatic budget cuts called

sequestration are the result of a hard-fought deal Obama signed in a 2011. GOP leaders are playing down talk

of a government shutdown that’s beingdriven by conservatives determined touse the spending legislation to stripfunds from Planned Parenthood. Theorganization is under intense scrutinyafter secretly recorded videos raiseduncomfortable questions about its prac-tices in procuring research tissue fromaborted fetuses. Cole said passing a short-term

spending bill will not be “a contention-free exercise.’’ The first days for Congress will be

marked by a fierce debate over thenuclear deal with Iran that Republicansinsist makes too many concessions toTehran. Democrats have rallied behindthe president and have already demon-strated they have the votes to sustain apromised Obama veto of a resolutiondisapproving the hard-won agreement. Also on the crowded fall agenda are

efforts to increase the government’sborrowing authority and avoid a first-ever federal default; extend some 50tax breaks; pass a defense policy billthat Obama has threatened to veto; andrenew the Federal Aviation

Administration’s authority to spendmoney. A historic address to Congress by

Pope Francis on Sept. 24 promises awelcome respite from the partisanshipthat has gripped the Capitol for most ofthe year. Some tea party lawmakers say they

will back legislation to keep the gov-ernment open in the new budget year,which begins Oct. 1, only if the meas-ure also terminates PlannedParenthood’s federal money — even iftheir battle with Obama over the issueshould spiral into a government shut-down. “I’m for doing everything’’ to halt

funds for Planned Parenthood, saidRep. Jim Jordan, R-Ohio. “There is noway they can get taxpayer support.’’ Conservative groups such as

Heritage Action are backing the strate-gy, though establishment anti-abortionorganizations aren’t throwing theirinfluence behind it. Douglas Johnson, legislative direc-

tor of the powerful National Right toLife Committee, said recently thatwhile blocking Planned Parenthood’sfunds “makes sense,’’ the Senate lacksthe votes to do so and abortions wouldcontinue anyway. He said lawmakersshould also focus on bills halting abor-tions. “We just don’t have the votes to get

the outcome that we’d like,’’ SenateMajority Leader Mitch McConnell, R-Ky., told a Kentucky television station.He called ending Planned Parenthood’sfunding “another issue that awaits anew president.’’ Past efforts to use must-pass funding

bills to block Obama’s health care lawand his executive actions on immigra-tion have failed badly, with the heathlaw dispute resulting in a partial gov-ernment shutdown in 2013. As a result, House GOP leaders are

considering separate legislation thismonth cutting Planned Parenthood’sfunds and reversing the health over-haul, according to a GOP aide and alobbyist. They hope such a bill, whichwould advance free of a filibuster threatby Senate Democrats, would satisfyPlanned Parenthood’s opponents andfree up the temporary governmentfunding bill. Obama would be certain to veto

such a bill, but it would allowRepublicans to vote for those changesand underscore the need for a GOPpresident to institute them. Facing demands for negotiations to

lift domestic agency budgets hit by thereturn of automatic spending cuts,McConnell has signaled that he is opento talks on a deal that would pairincreases for domestic programs withbudget relief for the Pentagon. To get to an agreement, however,

Republicans must strike a deal withObama and his Democratic allies overcompanion spending cuts elsewhere inthe budget to defray the cost of newspending for the Pentagon and domes-tic programs. There’s a limited pool ofsuch offsets, at least those with anacceptable level of political pain, andconsiderable competition over what tospend them on. For instance, McConnell helped

assemble a 10-year, $47 billion offsetspackage to pay for a Senate bill withsmall increases for highway and transitprograms. Democrats are eying thesame set of cuts to pay for boostingdomestic agencies. No one is underestimating the diffi-

culty in reaching agreement.Speculation is growing thatRepublicans will try to advance a billthat would keep most federal agenciesoperating at current budget levels, withonly a few changes for the most press-ing programs. The White House haspledged to block that idea. One potential glimmer of hope for

the talks is that earlier this yearRepublicans reversed a position theyheld in talks two years ago anddeclared that additional defense spend-ing doesn’t require companion spend-ing cuts. Congress also needs to raise the gov-

ernment’s $18.1 trillion borrowing capby mid-November or early December,an uncomfortable prospect for GOPleaders already facing potshots fromtea party purists and Republican presi-dential candidates as next year’s nomi-nation contests loom.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)


ALASKANC MACHINERY

www.ncmachinery.com800-478-7000

Anchorage, AK • 907-786-7500Dutch Harbor, AK • 907-581-1367Fairbanks, AK • 907-452-7251Juneau, AK • 907-789-0181

Prudhoe Bay, AK • 907-659-6900Wasilla, AK • 907-352-3400

CALIFORNIAHAWTHORNE CAT

www.hawthornecat.comSan Diego • 800-437-4228

Lakeside/Escondido/Chula Vista 800-750-4228 (Rental)

HOLT OF CALIFORNIAwww.holtca.com

Pleasant Grove • 916-921-8969

QUINN CATwww.quinncompany.com10006 Rose Hills Road

City of Industry, CA 90601888-842-2155 • Fax: 562-692-1843

BakersfieldCorcoranFirebaugh

Foothill RanchFresno

LancasterLos AngelesOxnardSalinas

Santa MariaSylmar

HAWAIIHAWTHORNE CAT

www.hawthornecat.comHilo • 808-961-3437Kauai • 808-245-4058Kona • 808-329-4521Oahu • 808-677-9111

Oahu • 808-676-0227 (Rental)Maui 808-877-6538

NORTH DAKOTATRACTOR AND EQUIPMENTWilliston • 701-572-8377

MONTANATRACTOR AND EQUIPMENTBillings, MT • 406-656-0202Billings-Sgt. • 406-245-4426Bozeman • 406-585-5800Great Falls • 406-761-7900Helena • 406-442-2990

NEVADACASHMAN EQUIPMENT

www.cashmanequipment.com3300 St. Rose ParkwayHenderson, NV 89052

702-649-8777Fax: 702-633-4699Elko • 775-738-9871

Reno/Sparks • 775-358-5111

NEW MEXICOWAGNER EQUIPMENT CO.www.wagnerequipment.com

Flora Vista505-334-5522 (Rental)

La Cruces575-647-9700Albuquerque

505-938-2000 (Rental)505-345-8411

Hobbs575-393-2148 (Rental)

575-393-3665Clovis

505-235-3294 (Rental)Farmington

505-327-5331

WASHINGTONN C MACHINERY800-562-4735

Seattle • 425-251-5800Chehalis • 360-748-8845Fife • 253-896-0878

Monroe • 360-805-6000Mt. Vernon • 360-424-4292Wenatchee • 509-886-5561Yakima • 509-248-2371

WYOMINGTRACTOR AND EQUIPMENTWorland • 307-347-4747


States Act While Congress Holds Up Long-Term FundingThe widespread focus on trans-

portation funding comes as stateofficials are becoming frustrated byfederal inaction in helping to repairroads and bridges described ascrumbling, aging and unsafe. About 20 percent of the nation’s

900,000 mi. of interstates andmajor roads need resurfacing orreconstruction, according to oneanalysis of federal data. A quarterof the 600,000 bridges are consid-ered structurally deficient or func-tionally obsolete. That doesn’t nec-essarily mean they are about to fall;it means they are showing worri-some problems or are no longeradequate for today’s traffic. “There’s a lot of voices that say

let’s push this off,’’ said TennesseeGov. Bill Haslam, whose call formore transportation funding hasbeen opposed by some fellowRepublicans. “But the need is notgoing to go away. We’re going tohave to do something to addressthis.’’ In many states, the new money is

going primarily toward repairingold infrastructure, though someprojects — such as a new four-laneU.S. 20 across Iowa — are

designed to ease congestion so thatcommerce can flow more freely. Congress has yet to agree on

long-term funding to supplementthe states’ efforts. Instead, it recent-ly passed its 34th short-term exten-sion of the nation’s transportationprogram since 2009, ensuring onlythat states will continue to receivefederal highway funding throughOct. 29. Federal dollars, on average,

cover about half of a state’s capitalexpenditures for roads and bridges,according to the American Road &Transportation BuildersAssociation. But the money avail-able from the Federal HighwayTrust Fund declined 3.5 percentduring the five-year period endingin 2013, the latest year for whichnumbers are available, because ofimproved fuel economy and otherfactors. The fund receives moneyfrom federal taxes on gasoline anddiesel. Regardless of what Congress

ultimately does, some state officialssay more taxpayer money will berequired to update their aging infra-structure for the modern economy.The newly passed measures putonly a dent in a backlog of projects.

In Connecticut, for example, leg-islators recently approved $2.8 bil-lion of additional transportationbonding over the next five years.But that’s just the start of whatDemocratic Gov. Dannel Malloyhopes will be a 30-year, $100 bil-lion overhaul of the state’s trans-portation system. Idaho Gov. C.L. “Butch’’ Otter, a

Republican, signed a law this springraising the fuel tax by 7 cents a gal-lon and increasing vehicle registra-tion fees. That’s projected to raise$95 million a year, barely a third ofthe $262 million annual shortfall inthe transportation system.Legislators in Kentucky and

North Carolina — where tax ratesare linked to the price of fuel —passed measures to avert large cutscaused by falling fuel prices. Butthose bills didn’t generate any addi-tional money. Though politicians often talk

about coming up with creativeways of funding roads, many stateshave resorted to the traditionalmeans of taxing and borrowing.That’s caused consternation forsome Republicans who have cam-paigned against such things. But ithelps that 2015 isn’t an election

year. Nebraska’s single-house legisla-

ture, which is dominated byRepublicans, overrode RepublicanGov. Pete Ricketts’ veto to enact a6-cent-a-gallon fuel tax increase. “I had to do a great deal of soul-

searching’’ on a fuel tax increase,said sponsor Sen. Jim Smith, a con-servative Republican. But headded: “The magnitude of the[transportation] backlog was solarge that we would not be able totackle that with gains and efficien-cies alone.’’ Transportation economist

George Hoffer of the University ofRichmond in Virginia said manypoliticians find it more palatable toraise the fuel tax than other taxesbecause “it’s considered equitable— the more you use, the more youpay.’’ Also, because fuel prices regu-

larly fluctuate, it’s sometimes hard-er for motorists to notice the addedtax. “If it’s infrastructure-related,

that’s a legitimate reason to raiseit,’’ said motorist Lauren Sharkeyof Spokane, Wash., where the stategasoline tax increased by 7 cents onAug. 1 as part of a new 16-year,

$16 billion transportation plan. In states that haven’t raised road

taxes, some local governments areforging ahead on their own. A new4-cent-a-gallon gas tax took effectin July in Normal, Ill. A 5-cent hikeis to kick in Jan. 1 in OsceolaCounty, Fla., just south of Orlando. Some transportation tax plans

have been rejected by voters.Missouri and Michigan, wheremeasures were defeated, are nowpondering alternatives. Frustrated that others have acted

while his home state has not,Missouri transportation commis-sion chairman Stephen Miller hasbeen distributing newsletters warn-ing that his agency has “a hugeproblem’’ and “no ready solution.’’Within a decade, he said, 75 per-cent of Missouri’s secondary roadscould be in poor condition. “At both the federal level and the

state level, everyone says trans-portation is incredibly important,we have a need, we are underfund-ed, and then nobody can agree onhow to do that,’’ Miller said.


REPAIRS from page 1

Cat CT680 Delivers Combination of Durability, ComfortThe Cat vocational truck line

continues to grow to meet cus-tomer needs with the addition ofthe CT680, a Class 8 set-forward-axle model built to tackle today’smost demanding jobs while settingnew standards for comfort andstyle, according to the manufactur-er.The third vocational truck

offered by Caterpillar, the CT680features a rugged exterior, attrac-tive automotive appearance, spa-cious and ergonomic cab, andvocational-specific engine andtransmission. Its set-forward axle,parabolic taper leaf suspension,tuned cab air suspension system,and premium sound insulation andtrim combine to deliver industry-leading ride quality. “Customers told us they wanted

a truck they could work hard,” saidDave Schmitz, vocational truckproduct manager. “The CT680 isas rugged as they come — built forheavy loads, hard jobs and harshenvironments — but it still deliversshift-long comfort and a stylishappearance. Its bold design will setour customers apart from thecrowd.”

Rugged, Stylish ExteriorPurpose-built for heavy-duty

work, the CT680 stands up to bigloads and tough applications with-out sacrificing comfort and appear-ance, due to automotive stylingand class-leading materials, fit andfinish. Customers can choose fromtruck or tractor configurations andtwo exterior trim levels — L andLG — addressing different stylesand serviceability needs.The CT680L features a three-

piece Metton hood, three-piecechrome bumper and three-piecechrome stainless grille surround, aswell as composite halogen head-lights and incandescent park/turnlights. The CT680LG comes with

a one-piece fiberglass hood, three-piece black bumper and integratedfiberglass grille surround, alongwith sealed-beam halogen head-lights and LED park/turn lights.A dual external air cleaner

option — for efficient air manage-ment even in dirty, dusty applica-tions — also is available.To keep service time to a mini-

mum, the CT680’s modular com-ponents — including the grille,grille surround, bumper and fenderextensions — can be replaced indi-vidually. Key service points likecoolant, washer reservoirs and airfilters are easy to access, and cus-tomers can quickly replace head-light bulbs and windshield wiperblades without tools.

Comfortable, Productive Cab

The CT680’s wide, spaciousinterior is packed with features thatdeliver all-day comfort, productiv-ity and safety. The ergonomicdashboard and center stack make iteasy for drivers to read gaugesthrough the steering wheel. Tunedcab air suspension, premium gradesound insulation, and a durablerouting and clipping wire systemhelp ensure a smooth, quiet ride.Drivers can choose from multi-

ple seat options, including the Catcomfort seat. The tilting, telescop-ing steering column with a leather-wrapped steering wheel comesstandard. There’s plenty of roomfor paperwork and log books ineasy-to-reach side compartments,back-panel storage and oversizedside pockets. Overhead, under-dash and adjustable map lights illu-minate work areas, and HVACcontrols and vents are easy toaccess and positioned for optimumair flow.To keep drivers and those

around them safe, the CT680 fea-tures a curved, sloped, wraparound

windshield — in a one- or two-piece design — that offers anenhanced view of the road. Large,heated, cowl-mounted mirrorswith integrated turn signals alsoenhance all-around visibility. Agenerous door opening, three-pointgrab irons and skid-resistant stepsallow for safe entry and exit.

Vocational-Specific EnginePowering the CT680 is a Cat CT

Series vocational truck engine withhorsepower ratings from 410 to475, peak torque ratings from1,450 to 1,700 lb-ft and the flexi-bility to match power and perform-ance to specific jobs and operatingconditions. A highly efficientselective catalytic reduction (SCR)solution, with upgraded in-cylindertechnology and proven aftertreat-ment, meets emission require-ments.The CT Series engine’s durable,

compacted graphite iron blockreduces weight by as much as 200lbs. (90.7 kg) compared to standard

iron — allowing customers toincrease payloads, efficiency andprofit. A single electronic controlmodule and fewer electrical con-nections help reduce diagnosticand maintenance time, and a fluid-free head gasket eliminates the riskof coolant leaking into engine oilor exhaust gases entering the cool-ing system.

Productive, Easy-to-Operate TransmissionFeaturing six forward speeds

and one reverse, the Cat CX31automatic transmission deliversrugged durability, smooth shiftingand optimum power. It boasts ahigh power-to-weight ratio, fullpower shifting and quick accelera-tion to boost productivity. Idealspeed and torque combinationshelp improve fuel economy, andtwo side PTO locations and a Catexclusive rear PTO enhance versa-tility and serviceability, accordingto the manufacturer.The automatic transmission is

simple to learn and operate, mak-ing it easier for customers to find,train and retain productive drivers.Since drivers don’t need to operatethe clutch or remove their handsfrom the wheel, it also enhancesjobsite safety. Other options for theCT680 include a variety of manualtransmissions and the UltrashiftPlus vocational transmission builtby Eaton.

Performance-EnhancingTechnology

The CT680 comes standardwith Caterpillar’s comprehensiveasset and fleet management tool,Product Link. Customers can usethis tool and the accompanyingVisionLink web interface to trackfuel use and costs, location, work-ing versus idle time, preventivemaintenance schedules and more.Fault code or suspicious move-ment alerts can be sent via email ortext message to help keep down-time to a minimum.Also available are an optional

vehicle infotainment system and abendix tire pressure monitoringsystem.“If you have heavy loads to haul

or hard work to perform, and youwant to do it in comfort and style,then the CT680 is your truck,”Schmitz said. “You get the ruggeddurability and dealer support youexpect from Cat, plus a premiumwork environment for the driverand best-in-class styling, materialsand serviceability.”Like the Cat CT660 and CT681,

the CT680 is backed by bumper-to-bumper service at more than400 Cat dealer locations acrossNorth America.For more information, www.dri-

vecat.com.(This story also can be found on

Construction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)

Pages 43-45To view our current comparison trailer specification charts visit www.constructionequipmentguide.com

SECT IONTrucks & Trailers

The third vocational truck offered by Caterpillar, the CT680 fea-tures a rugged exterior, attractive automotive appearance, spa-cious and ergonomic cab, and vocational-specific engine andtransmission.

• September 19, 2015 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide

Travis Body & Trailer Inc., a manufac-turer of end dumps, bottom dumps, transfertrailers and specialty dump trailers, hiredJerry Guerrero as its new director of opera-tions. Travis created this new position tokeep up with the latest production processesand techniques, improve operational effi-ciency and increase trailer output.Guerrero’s main responsibilities include

managing plant supervisors and employeesand overseeing all manufacturing opera-tions. His primary focus includes introduc-ing advanced plant management and Leanmanufacturing production systems. Thesenew techniques will manage and drive cul-tural change to improve and sustain higherlevels of operational performance, accordingto the company.As internal performance improves, trailer

output will increase. With more output cus-tomers can gain access to Travis trailersfaster and receive better service than before.“I feel I bring the leadership and the expe-

rience this role requires to help foster growthand build relationships,” Guerrero said. “Weplan to not only grow manufacturing opera-tions, but also promote and partner withsales and all other business areas of Travis todrive productivity and efficiency and

achieve goals.”Other skills he brings to Travis include

strategic and tactical planning, managementand leadership with high-level complexityprojects, and experience in crisis manage-ment.“Jerry’s leadership skills, certifications

and extensive understanding of operationalmanagement philosophies make him a valu-able asset to the Travis team, and he will beimmediately impactful in all aspects of ourproduction,” said C.K. “Bud” Hughes,Travis Body & Trailer president.Guerrero brings more than 25 years of

experience in the manufacturing and auto-motive industries to his new role. Prior to

joining Travis, he worked as a plant opera-tions manager at Taxa Inc. in Houston,where he helped transform a shop into amanufacturing facility and increase produc-tivity and output. He also has worked as aLean quality manager, Lean manager, oper-ational excellence leader and staff engineer.He earned certifications in numerous manu-facturing and plant management areas, aswell as completing Six Sigma Black Belttraining and Toyota Production Systems.“I look forward to truly changing the way

we think and operate. I want to take ourmanufacturing facility to the next level ofoperational excellence,” Guerrero said. “Ican’t wait to witness the results on the entire

organization in the next 3 months, 6 months,year and years to come.”For more information, call 800/535-4372

or visit www.travistrailers.com.(This story also can be found on


Jerry Guerrero, Travis Body & Trailer’snew director of operations, will work tointroduce advanced plant managementand production systems to improveoperational excellence.

“I look forward to truly changing the way we think andoperate. I want to take our manufacturing facility to thenext level of operational excellence.”

Jerry GuerreroTravis Body & Trailer Inc.

Travis Body & Trailer Announces Director of Operations

Thunder Creek Equipment Introduces FST Series Trailers Thunder Creek Equipment has introduced its FST Series

trailers — available in 500-, 750- and 990-gal. (1,893, 2,839and 3,747 L) diesel capacities with a 100-gal. (378.5 L) DEFtank and an optional field-installed rear utility box. The new FST Series combines the best of Thunder

Creek’s fuel, DEF and service transportation technologiesinto a single design while retaining the company’s focus oncraftsmanship with heavy gauge steel, and premium optionsthat allow contractors to spec each trailer to meet thedemands of their work, according to the manufacturer. The rear utility box is 55 percent larger than previous

designs and can be installed on any FST Series trailer at anytime — allowing owners looking for basic fuel transporta-tion to later build out their own mobile service trailer as theirneeds evolve. Options include a three-in-one welder/generator/air compressor, anauxiliary oil tank, a Worksight lighttower and a Field Max tire kit. All Thunder Creek trailers are

built with a low profile and baffledfuel tanks, making them suitablefor traveling both on-road at high-way speeds and off-road on largejob sites.

Expanded SpaceWith more than double the

capacity for tools and storage,FST Series trailers have 75 cu.ft. (2 cu m) of space in the front

and pump enclosures, and an additional 60 cu. ft. (1.7 cu m)in the optional rear utility box that can be outfitted at the timeof purchase or field-installed at a later date.

Better AccessHatch-style doors open to give unrestricted access to the

pumping systems, controls and options. All interfaces arenow positioned ergonomically at the operator’s naturalheight.

More TowableThe fully baffled fuel tanks are now taller, which reduces

the overall length of the trailer. The front enclosure is nar-rower for better maneuvering. This makes for one of themost towable trailers on the market today.

TougherWith seven gauge steel and double-

welded seams, Thunder

Creek has always been known for craftsmanship and dura-bility. With a 25-percent stronger frame, FST Series trailersare built to withstand continual off-road use in environmentsranging from oil and gas pipelines to road construction.Replaceable fenders and a rock guard provide the ultimateprotection from rock chips and damage over the life of thetrailer, according to the manufacturer.

Improved DEF HandlingThe closed-loop DEF delivery system with two-in-one

DEF pumping system is a reliable and contamination-freemethod of delivering DEF to off-highway equipment. FSTSeries trailers are compliant with ISO 22241 standards tomaintain purity. The DEF systems on FST Series trailersnow feature:• A 100-gal. poly tank nested into the trailer frame for a

low center of gravity• Higher pump flows• Auto shut-off when filling• The ability for DEF to freeze in the tank without causing

damage

Options PackagingThunder Creek offers a large selection of options to reduce

downtime in the field. These options can now be equipped inpackages, which can save the customer as much as 20 per-cent at the time of purchase. For more information, visit ThunderCreek.com.(This story also can be found on Construction Equipment


With more than doublethe capacity for toolsand storage, FST Seriestrailers have 75 cu. ft.(2 cu m) of space in thefront and pump enclo-sures, and an additional60 cu. ft. (1.7 cu m) in the

optional rear utility box thatcan be outfitted at the time of pur-

chase or field-installed at a later date.

Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • September 19, 2015 •

Rugby HD Rancher Body Works for Heavy-Duty Jobs

Rugby Manufacturing recently introduced an all-new Rugby HD Rancher body,ideal for heavier duty construction and landscape applications, as well as oil fieldoperations. Designed for maximum durability, the HD Rancher offers severalenhanced features including an upgraded 3/16-in. (.5 cm) tread plate floor, 7-gaugeformed crossmembers with 12-in. (30.5 cm) spacing, 12-gauge bulkhead sheet anda 3/8-in. (.9 cm) tie down rail. The HD Rancher also is available with a B&WTurnoverball gooseneck hitch that allows a flat surface with no cutouts in the floor.Five models of the new HD Rancher are available ranging in length from 9 ft. 3 in.to 12 ft. (2.8 to 3.6 m).For more information, call 701/776-5722 or visit www.rugbymfg.com.

Talbert Launches Updated Traveling Axle Trailer Series Talbert Manufacturing updated

its traveling axle (TA) series byincreasing its hauling capacity by 5tons (4.5 t). Three of the new trail-er models — the 4048TA, 4050TAand 4053TA — have a 40-ton haul-ing capacity, and the new 5548TAand 5553TA trailer models haul asmuch as 55 tons (50 t). The fivenew trailer models will replace theothers within the TA Series. The added capacity on the new

TA Series trailers equates toincreased hauling flexibility. Forexample, the 4050TA now has an80,000-lb. (36,287 kg) evenly dis-tributed capacity or a concentratedload capacity of 50,000 lb. (22,679kg) in 10 ft. (3 m). This allowshaulers to expand their range ofload opportunities and maximizetransportation efficiency, whilecomplying with U.S. state andCanadian province haulingrequirements. The TA Series trailers feature a

36-in. (91 cm) loaded deck height,which provides additional clear-ance for bridges and tunnels when

transporting tall equipment. The4050TA was the first modelreleased in the updated TA Serieswith this low deck height feature,and it also is California-legal, mak-ing the 4050TA an ideal west coasthauling trailer. The five new TA Series trailer

models feature Talbert’s signaturepiggy-back cylinder, now with alarger diameter for faster axle trav-el. The new models also have anincreased number of keyholesacross the rear of the trailer foradditional flexibility for tying

down loads, an improved, lockablecurbside gooseneck toolbox thatincludes a weather resistant doorseal, as well as a chain rack andother hardware upgrades. Another key advancement with

the new TA Series trailers is thestandard metal e-chain for the airand electrical lines, which nowmakes it both easier and lessexpensive to add optional docklevelers as an aftermarket option.The TA Series trailers feature

key trailer components for easyloading on its 7-degree load angle.

Talbert’s standard equipment forthe series includes a 15,000-lb.(6,804 kg) planetary winch with atwo-function, wireless remote. Itassists in moving equipment onand off of the trailer by making itpossible for one person to load apiece of equipment without leav-ing the vehicle. Talbert also offerstwo other upgrade options; a six-function remote and a 20,000-lb.(9,072 kg) planetary winch. Thesix-function remote provides theoperator with the ability to adjustthe movement of the axles, winch

and deck while loading. The TA Series trailers come

standard with double keyhole tie-down slots on top of the outsidebeams and recessed in the center ofthe main deck. For recessed tie-downs, Talbert includes a metalbasket that is mounted below thedeck to protect the main cylinderfrom excess chain. Talbert has multiple, optional

features to enhance the TA Seriestrailers. Available coating selec-tions include the standard ValsparR-Cure 800 paint in Talbert’s sig-nature red and optional ValsparAquaguard for corrosion protec-tion. Additional optional equip-ment includes a 48-in. (122 cm)aluminum/steel bulkhead withstrobe and work lights, a central-ized lubrication system and a rightweigh load scale.For more information, call

800/348-5232 or visit www.tal-bertmfg.com.


Three of the new trailer models — the 4048TA, 4050TA and 4053TA — have a 40-ton hauling capaci-ty, and the new 5548TA and 5553TA trailer models haul as much as 55 tons (50 t).


The Easy Way To Advertise Your Equipment

Run In Two Consecutive IssuesBlack & White $105 • Color $155

Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $105 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 23,010 Construction Equipment Buyers in the Western States.

For more information, call Construction Equipment Guide today at

800/523-2200

MCLAREN RUBBER TRACKS FOR MINI EXCAVATORS &TRACK LOADERS, The most trusted brand in Americabrings you quality tracks for your specific make andmodel.

Call McLaren 888-492-4230 18-19 DH

MCLAREN FOR SKID STEER TRACKS, Full flotation; traction; tire protection; machine stability; self-cleaning;less ground damage; fully rebuildable; interchangeableshoe types.

Call McLaren 888-492-4230 18-19 DH

MCLAREN SOLID CUSHION TIRES, for skid steers, backhoes, telehandlers, wheel loaders - Nu-Air Semi-Pneumatic Tire Technology: no flats ever; soft, air-cushioned ride; last 3 to 5 times longer than regularpneumatic tires; rims included; same day shipping; various tire sizes available.

Call McLaren 888-492-4230 18-19 DH

“TRACKS FOR YOUR MACHINE!!” $12,000,000 Inventory of High-QualitySUMMIT Rubber Tracks to fit over 6000 models of construction equip. RUBBER PADS AND FLATPROOF SKIDSTEER TIRES also available. $95 Next day shipping to 23 states .............................................................Call

Summit Supply LLCEast, West & South Warehouses

888-888-1248 • [email protected] 19-20 TM

Serving the Construction Industry Since 1989Trench Shoring - Confined Space - Pipe Plugs

Rentals - Sales - Service800-828-8505 18-19 PK

Sentry Tires - Skid Steer and Wheel Loader Tiresat Volume Buyers Prices!

Call Mark Sladoje for Sizes & Pricing614-395-4064 18-19 EB

BUCKets

excavator Bucket

BUCKets For sALe!

6 cu. yd. buckets for Cat 966D, E or F Model.

Brand new!

5 Available$5500 each

truck equipmentFabrication

661-251-4200

CoMPACtIon eQUIP.

Vibratory Compactors

2011 Volvo DD138HF, DoubleDrum Smooth, Water Tanks,Very good condition, 1,104hours ........................$57,500.

t-rex equipment, Inc.714-299-2273

eXCAVAtors

Mini excavators

2011 Kobelco sK35-sr5, s/n

PX15-21229, Open ROPS,

Rubber Tracks, Dozer Blade,

Fresh paint, Good condition,

2,522 hrs ..................$33,000.

Western rentals

909-822-8008

LoADers

Wheel Loaders

2004 Kawasaki 115ZV, s/n

11C4-5042, Previously in

Quarry, 10 Yd. bucket, Very

good condition, straight, 23,012

hours ........................$98,000.

2004 Kawasaki 115ZV, s/n

11C4-5041, Previously in

Quarry, 10 Yd. bucket, Very

good condition, straight, 29,146

hours ........................$98,000.

elliott & Frantz, Inc.

610-279-5200

trUCKs

Dump trucks

Moxy Mt41 Articulated Dump

Truck, s/n 810078, Good condi-

tion, 6,800 hrs ........$125,000.

gibson Machinery LLC

440-439-4000

DO YOu Have a Few Pieces OF HeavY equiPmeNt tO seLL?

Construction Equipment Guide is THE Place to List It!

2 InsertIons In one regIon (northeast, southeast, Midwest, West)30 words or less$1.16 additional per word over 30For an additional $20 we can post your ad on our website in our online searchable database. You must have a classified print ad to do so.

ONLY

$35Call 800-523-2200or go online to place your ad

www.constructionequipmentguide.com/pages/customer/classifieds.asp

and place your ad through our websiteand we will contact you!

®

CLASSIFIEDSWould you like

YOURCOMPANYfeatured in ConstructionEquipment

Guide?If so, please contact us:

470Maryland Drive,

FortWashington,

PA 19034

Classified Rates:30 Words or Less for $35.00. Each Additional Word is $1.16.For just an additional $20 your ad can be posted on our online searchable

database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034

215/885-2900 • Fax 215/885-2910Toll Free 1-800/523-2200


WACKER RT 820 REMOTE USED ORNEW, USACONTACT: KEVINPHONE: 856-692-0027EMAIL: [email protected]––––––––––––––––––––––––––––––––EQUIPMENT MANUALS | WE BUY ANDSELL AG AND CONSTRUCTION MANU-ALS, PARTS, OPERATOR & SERVICEMANUALS .BIG OR SMALL LOTSCONTACT: JOHN WHITNEYPHONE: 530-864-0771EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A REPLACEMENTENGINE 2006 JD CT322CONTACT: TONYPHONE: 843-599-7308EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER D8H DIRECT DRIVE |NEEDED BULLDOZER D8H «DIRECTDRIVE« A CLUTHCH FROM USER ORGENTLEMAN FARMER MUST BE GOODGOOD CHEAP NO JUNK I PAY THEMARKET UNDER UNDER?? THANKS INEED 3CONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU SERVICE MANUAL | SERVICEMANUAL FOR KOMATSU PC200LC-7FOR SERIAL NUMBER C50001 AND UPCONTACT: JOEPHONE: 724-944-5569EMAIL: [email protected]––––––––––––––––––––––––––––––––GUARDRAIL POST DRIVERCONTACT: RANDY NORIEGAPHONE: 626-260-4429FAX: 626-279-5510EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED A ENGINE HOOD FOR A 2001KOMATSU 228USLC-3 # 20441CONTACT: EDDIE GREENPHONE: 864-327-3909EMAIL: [email protected]––––––––––––––––––––––––––––––––NEED CAT 988H WITH OR WITHOUTBLOCK HANDLER. I NEED COUNTERWEIGHT AND SHORT LIFT OR STAN-DARD LIFT AND IN AND AROUND$100,000CONTACT: HEMAN UDESHIPHONE: 917623970400EMAIL: [email protected]––––––––––––––––––––––––––––––––FLEET TRUCK OR VAN | I AM LOOKINGFOR A USED UTILITY WORK TRUCKWITH TOOL BOX, S & A RACK....95 TO05 ALL ON CONDITIONCONTACT: KENPHONE: 925-687-8831EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER D50CONTACT: I KALYANKRSHNAPHONE: 900-011-0789EMAIL:[email protected]––––––––––––––––––––––––––––––––

CAT WHEEL LOADER950B/950E/966D/966E & 966F | WANT TOBUY CAT WHEEL LOADER 920, 930,936E, 950, 950B, 950E, 966D, 966E,966F-I, 980C, 980FCONTACT: AHMEDPHONE: 0092-333 2376638EMAIL: [email protected]––––––––––––––––––––––––––––––––(2) USED 14 YARD DUMP TRUCKS |BUYER DO IN LOS ANGELES ON AUG31ST. NEEDS (2) 14 YARD DUMPTRUCKS, (1) USED 6 TO 8 TON HIGH-REACH FORK LIFT. CONCRETE SHEARAND HYD HAMMER FOR 200 CLC JOHNDEERE. CASH BUYER. SHIP ALL OUTOF WILMINGTON PORT, CALIFORNIA.CONTACT: BOB LAMBERTONPHONE: 919-896-4782FAX: 888-318-1663EMAIL:[email protected]––––––––––––––––––––––––––––––––LOW HOUR VALMET 385 MAXI HEADCONTACT: LEROY BROECKERPHONE: 810-280-8183EMAIL: [email protected]––––––––––––––––––––––––––––––––5BY16 3DECK INCLINEDOR HORZSCREEN | GOOD OPERATING CONDI-TION WITH MOTORCONTACT: JJ BRENNAN CONSTEMAIL:[email protected]––––––––––––––––––––––––––––––––NEED RUNNING OR NON-RUNNING CATWHEEL LOADERS 910, 920, 930, 936 &936E, RUNNING CAT WHEEL LOADERS950, 950B, 950E, 950F/F-II, 966C/E &966F/F-II, CAT WHEEL LOADERS 970F,980C, 980F, 988B & 972GCONTACT: RIZPHONE: 832-528-0786EMAIL: [email protected]––––––––––––––––––––––––––––––––BACKHOE COMPACT | KUBOTA L39 ,L45. 0R JOHN DEERE 110CONTACT: RICKEMAIL: [email protected]––––––––––––––––––––––––––––––––NEED BULLDOZER D4G , D5G ENC CABOR ROPS LGP OR STANDARD NOTADVERTISED NO MACHINERY TRADERNO ROCK AND DIRT USER USA IF POS-SIBLE LOW HOURS I NEED 3 OR 4 FASTCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––KOBELCO 330 EXCAVATOR ENGINE |COMPLETE OR SHORT BLOCK ENGINEMODEL 6D16TLE2 FOR KOBELCO 330EXCAVATOR ENGINECONTACT: RICHARDPHONE: 732-489-3266FAX: 732-560-7313EMAIL: [email protected]––––––––––––––––––––––––––––––––CAB CAT 826H | WE ARE LOOKING FORA CAT 826H CAB FOR A LANDFILLCOMPACTOR.CONTACT: JOHN STEWARTPHONE: 519-686-1123EMAIL:[email protected]––––––––––––––––––––––––––––––––

WANTED SNOW BLADE | LIGHT WT.BLADE FOR DRIVEWAY 6-8 FTCONTACT: DAVEPHONE: 7097002406EMAIL: [email protected]––––––––––––––––––––––––––––––––OILFIELD RIG UP TRUCK | MUST HAVEAT LEAST 20 BED WITH POLES ANDWINCHES, CAPABLE OF TAIL ROLLING50, 000 LBS.CONTACT: R.W. SIDWELLPHONE: 505-334-7800FAX: 505-334-8740EMAIL:[email protected]––––––––––––––––––––––––––––––––FORK LIFT | LOOKING FOR A 25, 000LBS FORKLIFT IN GOOD CONDITIONCONTACT: MIKEEMAIL: [email protected]––––––––––––––––––––––––––––––––BELLY MOWER | THE MAIN FRAMETHAT ATTACHES THIS ALAMO FLAILMOWER TO FORD 5000 TRACTOREMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS | WEARE LOOKING TO PURCHASE NEW ORUSED SERVICE, SHOP, PARTS, OPERA-TOR’S OR OTHER MANUALS FOREQUIPMENT OF ALL SORTS, BUT NOTINCLUDED TRUCKS AND VEHICLES.WE PREFER IN BULK, PERHAPS YOUHAVE COMPUTERIZED YOUR SERVICEOR PARTS OPERATION AND YOU HAVEBOOKS OR MANUALS YOU NOLONGER NEED, OR INVENTORIES YOUHAVE NOT SOLD. PERHAPS AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE.PLEASE FEEL FREE TO CALL US AT270-849-2270 OR EMAILCONTACT: GRACE FRANCESPHONE: 2708492270EMAIL: [email protected]––––––––––––––––––––––––––––––––USED WHEEL LOADER WA3806 | WEARE LOOKING USED WHEEL LOADERWA380-6 OR MORE SUPERIOR CAPACI-TY.CONTACT: MUHAMMAD IRFAN BUTTPHONE: 00923214331232FAX: 00923004213128EMAIL:[email protected]––––––––––––––––––––––––––––––––DROP HAMMER | TO ATTACH TO A 248CAT SKID STEERCONTACT: MATTHEW WATKINSPHONE: 214-274-9528EMAIL:[email protected]––––––––––––––––––––––––––––––––KOBELCO SK480LC DRIVE MOT | INEED DRIVE MOTOR AND SEALSCONTACT: TOM CLAUSSPHONE: 215-624-2221FAX: 215-331-5870EMAIL:[email protected]––––––––––––––––––––––––––––––––MINI EXCAVATOR W/MOWER HEAD.CONTACT: JOHN HOUCHINPHONE: 541-619-0695EMAIL: [email protected]––––––––––––––––––––––––––––––––

BACKHOE LOADER | LOOKING FOR ABACKHOE LOADER TO WORK AROUNDOUR PROPERTYCONTACT: JERRY COTEPHONE: 603-239-8846EMAIL: [email protected]––––––––––––––––––––––––––––––––DUMP TRUCKS | WE ARE LOOKINGFOR ANY MAJOR MANUFACTURERDUMP TRUCKS. TANDEM AND TRIAXLE. CHEVROLET, FORD, INTERNA-TIONAL, MACK, FREIGHTLINER, PETER-BILT, VOLVO ETC.CONTACT: ALLAN WATSONPHONE: 336-789-1138FAX: 336-823-6675EMAIL: [email protected]––––––––––––––––––––––––––––––––BLADE | WE ARE LOOKING FOR ALANDFILL U BLADE TO FIT A CAT836G/H LANDFILL COMPACTOR.CONTACT: JOHN STEWARTPHONE: 519-686-1123EMAIL: [email protected]––––––––––––––––––––––––––––––––FORKLIFT DIESELCONTACT: UMARZAMANPHONE: 00971559012992FAX: 0097165323306EMAIL:[email protected]––––––––––––––––––––––––––––––––WET MACADAM MIX (CONTINUOUS MIXPLANT) | ROAD BASE MIXING PLANT(AGGREGATE, SAND AND WATER MIX-ING)CONTACT: SASIKUMARPHONE: +971 55 6030051EMAIL:[email protected]––––––––––––––––––––––––––––––––VIBRATOR PILE DRIVER EXTRACTOR,MARK FOSTER, MODEL 4000, GOODCONDITION, PRICE AROUND $6000,CONTACT: ANIS KALDESPHONE: 201-779-3243EMAIL: [email protected]––––––––––––––––––––––––––––––––POCKLIN 210CONTACT: SUMERSINGHLOHACHPHONE: 09812084118EMAIL:[email protected]––––––––––––––––––––––––––––––––

SAA6D114 E3 KOMATSU ENGINECONTACT: JIM PATTERSONEMAIL: [email protected]––––––––––––––––––––––––––––––––EUCLID R25 OFF ROAD TRUCK | GOODCONDITION, WORK READY. NORTH-EAST LOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED BULLDOZER D9R WITH RIPPER UNDER 9000 HOURS ON THEFRAME AND METERCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––HN 110, 140, 80 HITACHICONTACT: SVASSOCIATESPHONE: 903-048-9996EMAIL: [email protected]––––––––––––––––––––––––––––––––D6D OR D6C DOZER | NOT MORE THAN$15,000CONTACT: ST.MARK OREBELAPHONE: +2348062120316EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE 580 LOADER BACKHOES | CASEMODEL 580 SK L SL M SM N SNLOADER BACKHOESCONTACT: FRANK HORANPHONE: 800-33-GROFFFAX: 732-780-3618EMAIL:[email protected]––––––––––––––––––––––––––––––––DEERE 450C | I NEED A SET OFSWEEPS OR LIMB RISERS FOR A JOHNDEERE 450C WITH MOUNTING BRACK-ETS. I ALSO NEED A WINCH LEVERCONTROL CABLE.CONTACT: JOHN RATLIFFPHONE: 276-608-1507FAX: 276-591-1239EMAIL:[email protected]––––––––––––––––––––––––––––––––HOUGH PAYLOADER HF | 1947 TO 1954HOUGH HF COMPLETE, PARTS OR SAL-VAGE.CONTACT: TIM ROONEYPHONE: (651) 433 2142EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT | ABOUT 550 BULLDOZERCONTACT: MARVIN CAMPBELLPHONE: 360-229-6558EMAIL: [email protected]––––––––––––––––––––––––––––––––HM WHEEL LOADER 2021 | I WANT BUYHINDUSTAN WHEEL LOADER 2021CONTACT: HARESH MEHTAPHONE: 992-553-1659EMAIL: [email protected]––––––––––––––––––––––––––––––––TRAILER FLIP AXLES | WANTED TOBUY USED: FLIP AXLE FOR 1996 TRAILKING MODEL TK70MG FLIP AXLE FOR2013 FONTAINE MODEL MAGNITUDE40MX

CONTACT: DAVEPHONE: 570-494-4010FAX: 570-494-4014EMAIL: [email protected]––––––––––––––––––––––––––––––––USED SMALL TRACTOR WITH BUSH-HOG AUTOMATIC | GOOD USED SMALLTRACTOR NOT MUCH BIGGER THAN ALAWN MOWER WITH 6BUSH HOG.AUTOMATICCONTACT: HINSONPHONE: 334-295-8392EMAIL: [email protected]––––––––––––––––––––––––––––––––A WALK BEHIND BRUSH CUTTERCONTACT: BILL STEMPLEEMAIL: [email protected]––––––––––––––––––––––––––––––––HEAVY DUTY DOZERS, CRANES,LOADER, MOTOR GRADER, EXCAVA-TORS AND HEAVY DUTY TRUCK. KIND-LY FURNISH ME WITH DETAILS OFAVAILABILITY, PRICES AND CONDI-TIONS OF SALES TO ENABLE USPLACE ORDER.THANKS FOR ANTICI-PATED COOPERATION.CONTACT: ENGR. BALA DANSHEHUPHONE: TEL:+234-810-9940714FAX: FAX:+44-129-1200057EMAIL: [email protected]––––––––––––––––––––––––––––––––TACK WAGON | NEED A NEW ORLIGHTLY USED TACK WAGON - 500GALWITH SPRAY BARCONTACT: BARBARA SPAINPHONE: 703-851-7702FAX: 301-396-5783EMAIL:[email protected]––––––––––––––––––––––––––––––––DAVID BRADELY WALK BEHIND TRAC-TOR PLOWCONTACT: GREG HUNTZINGEREMAIL: [email protected]––––––––––––––––––––––––––––––––NEED BULLDOZER D10R 1996AT 2005 |NEED BULLDOZER D10R ENC CABWITH RIPPER UNDER UNDER 12000HOURS REAL HOURS ON THE FRAMEGOOD UNDERCARRIAGE FROM USERNOT ADVERTISED I PAY 85000.00US AT185000.00US CONDITIONAL INSPEC-TIONCONTACT: JEAN MAURICE BOUTINEMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR CRAWLER LOADER | IAM LOOKING TO BUY A CATERPILLAR943, 953, 963 OR 973 CRAWLERLOADER WITH A 4-IN-1 BUCKET ANDWORKING A/C. THE MACHINE DOESNOT HAVE TO BE NEW OR HAVE AGREAT UNDERCARRIAGE, I NEED IT TOCOMPLETE A FEW PROJECTS AT MYHOME. I AM LOOKING FOR SOMETHING$20, 000 OR UNDER. THE MACHINEWILL NEED TO BE TRANSPORTED TONAPLES, FL 34117.CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website for inclusion in our newsletters, simply visit:

www.ConstructionEquipmentGuide.com/wanted and enter your listings. Inappropriate or Sale Ads will be Deleted


ALEX LYON & SON AUCTIONEERSwww.lyonauction.com315-633-2944�

• Boston, MASeptember 18 - 19, 2015For: All types of Construction Equipment& more

• Dallas (Ft. Worth), TXThurs., September 24, 2015For: Rental Returns of Late ModelConstruction Equipment

• San Angelo, TXFri., September 25, 2015For: Late Model Construction Equipment& more

• Atlantic City, NJSat., September 26, 2015For: Late Model Construction Equipment& more

• Parkersburg, WVFri., October 2, 2015For: Major Earthmoving & PipelineCompletion

• Atlanta (Cummins), GAFri., October 9, 2015For: Major Multi Job Completion

• Syracuse, NYSat., October 10, 2015For: Late Model Rental Returns ofConstruction Equipment & more

• Kansas City, MOWed., October 14, 2015For: Large Mining & ConstructionEquipment

• Frankford, KYFri., October 16, 2015For: Complete Liquidation Rental Fleet

• Queretaro, MexicoFri., October 16, 2015For: Late Model Equipment and more

• Rochester, NYSat., October 17, 2015For: Very Large Rental Returns Auction.Construction Equipment & more

• Orlando, FLTues., October 20, 2015For: Late Model Rental Fleet Equipment

• Rochester, NYFri., October 23, 2015For: Job Completion of Two Local Jobs

• Plymouth, MASat., October 24, 2015For: Large Snow Equipment Auction

• Houston, TXThurs., October 29, 2015For: Major Job Completion Auction

• Manchester, NHSat., October 31, 2015For: Major Job Finishing ConstructionEquipment & more

• Norwich, NYSat., October 31, 2015For: Aggregate Construction Equipment,Trucks & more

• Somerset, PAFri., November 6, 2015For: Job Completion Coal & MiningEquipment

• Somerset, PASat., November 7, 2015For: Semi-Retirement Auction –Construction Equipment

• Somerset, PASun., November 8, 2015For: Beautiful 50 Car Collection

• Houston, TXTues., November 10, 2015For: Rental Fleet Construction Equipment& more

• Racine, WISat., November 14, 2015For: Rental Return Auction

• Syracuse, NYSun., November 15, 2015For: Estate Sale

• Canastota, NYSat., November 21, 2015For: Late Model Rental Fleet ConstructionEquipment & more

• Toronto, Ontario, CanadaMon., November 23, 2015For: Very, Very Large Late Model JDAgricultural Tractors & more

• Buffalo, NYSat., December 5, 2015For: Large Late Model Construction &Aggregate Equipment & more

• Albany (Greenwich), NYTues., December 29, 2015For: Large Rental Fleet Auction

• Hagerstown, MDWed., December 30, 2015For: Late Model Construction Equipment

• Kissimmee, FLJanuary 30 – February 7, 2016For: 23rd Annual Rental Return Auction

RITCHIE BROS. AUCTIONEERSwww.rbauction.com402-421-2631

• Sacramento, CASeptember 22, 2015

• Fort Worth, TXSeptember 23-24, 2015

• Kansas City, MOSeptember 25, 2015

• Los Angeles, CASeptember 25, 2015

• Nashville, TNSeptember 29, 2015

• Salt Lake City, UTSeptember 29, 2015

• St. Louis, MOSeptember 29, 2015

• Albuquerque, NMSeptember 30, 2015

• Raleigh-Durham, NCSeptember 30, 2015

• Salt Lake City, UTSeptember 30, 2015

• Chicago, ILOctober 1, 2015

• Wasilla, AKOctober 3, 2015

• Columbus, OHOctober 6, 2015

• Denver, COOctober 8, 2015

• Manchester, NHOctober 8, 2015

• Pineville, KYOctober 15, 2015

• Chehalis, WAOctober 16, 2015

• El Paso, TXOctober 21, 2015

• Orlando, FLOctober 22, 2015

• North East, MDOctober 27, 2015

• Youngstown, OHNovember 4, 2015

• Houston, TXNovember 11-12, 2015

• Spokane, WANovember 13, 2015

• Pittsburgh, PANovember 17, 2015

• Phoenix, AZNovember 18, 2015

BAR NONE AUCTIONwww.barnoneauction.com866-372-1700�

• Riverside, CASat., September 19, 2015For: Heavy Equipment & CommercialTruck Auction

• Portland, ORThurs., September 24, 2015For: Heavy Equipment & CommercialTruck Auction

• Sacramento, CASat., October 10, 2015For: Heavy Equipment & CommercialTruck Auction

• Riverside, CASat., October 17, 2015For: Heavy Equipment & CommercialTruck Auction

BIDADOO AUCTIONSwww.bidadoo.com1-877-BIDADOO�

• ONLINE ONLYSeptember 17 - 24, 2015For: Heavy Equipment

• ONLINE ONLYSeptember 24 – October 1, 2015For: End of Season Rental Sale

• ONLINE ONLYOctober 1 - 8, 2015For: Construction Auction




• ONLINE ONLYOctober 29 – November 5, 2015For: Construction Auction

BIG IRONwww.bigiron.com800-937-3558�

• ONLINE ONLYSeptember 23, 2015

• ONLINE ONLYSeptember 30, 2015

• ONLINE ONLYOctober 14, 2015



COMMONWEALTH OF PA www.auctionsbygov.com866-469-7383

• Cheswick, PATues., October 13, 2015For: Fall Heavy Equipment Auction

DARELL DUNKLE & ASSOCIATES AUC-TIONEERS INC.www.dunkleauctioneers.com�800-433-6670

• Harrison, MIThurs., October 22, 2015For: Fall Contractors Auction

DAVIS AUCTIONS, INC.www.davisauctionsinc.com�203-758-4087

• Prospect, CTSat., September 26, 2015For: Construction Equipment

DON SMOCK AUCTION CO., INC.www.dsa-auctions.com765-778-9277

• Cecil, OHSat., October 17, 2015For: 2nd Annual Fall NW OhioConsignment Auction

• Pendleton, INFri., December 11, 2015For: 23rd Annual Snowball Auction

EQUIFY AUCTIONS, LLCwww.equifyauctions.com888-535-8218

• Cisco, TXOctober 14-15, 2015For: Heavy Machinery & EquipmentAuction

EQUIPMENT ROW.comwww.equipmentrow.com580-931-6156

• ONGOING ONLINE TIMED Construction Equipment, Trucks/ Trailers,Farm Equipment & Salvage. New itemsadded daily!

EURO AUCTIONS USAwww.euroauctions.com770-683-3883

• Atlanta, GAThurs., October 8, 2015For: 100% Absolute Auction

GEYER AUCTION COMPANIESwww.geyerauctions.com800-554-5005

• Oaks, PASat., September 26, 2015For: Absolute Construction CompanyLiquidation Auction

HENDERSON AUCTIONSwww.hendersonauctions.com225-686-2252

• Livingston, LANovember 11-12, 2015For: 2 Day Winter Contractor’s Auction

HERITAGE GLOBAL PARTNERSwww.hgpauction.com203-733-7191

• ONLINE ONLYSeptember 26-30, 2015For: Surplus Construction, Earth Moving& more.

HESS AUCTIONEERSwww.hessauctioneers.net�866-511-2493

• Marietta, PAFri., October 23, 2015For: Truck, Trailer & Equipment Auction

HUNYADY AUCTION COMPANYwww.hunyady.com�800-233-6898

• Perkasie, PAWed., September 30, 2015For: Sealed Bid Auction – HVAC &Drilling

I.R.A.Y. AUCTIONwww.iraymn.com�320-968-7230

• Foley, MNFri., December 4, 2015For: Heavy Equipment

IronPlanet AUCTIONSwww.IronPlanet.com888-433-5426

• ONLINE ONLYSeptember 22, 2015For: U.S. Marine Corps ConstructionEquipment Sale

• ONLINE ONLYSeptember 23, 2015For: All-Humvee Sale

• ONLINE ONLYSeptember 24-25, 2015For: End-Of-Quarter Sale

• Des Moines, IAWed., September 30, 2015For: Live Unreserved Auctions

• Edmonton, AlbertaWed., October 21, 2015For: Live Unreserved Auctions

• Wilkes-Barre/Scranton, PATues., October 27, 2015For: Live Unreserved Auctions

• Houston, TXTues., November 10, 2015For: Live Unreserved Auctions

• Las Vegas, NVFri., December 11, 2015For: Live Unreserved Auctions

• Orlando, FLFebruary 9-12, 2016For: Live Unreserved Auctions

J.J. KANE AUCTIONEERSwww.jjkane.com�855-GO2-KANE

• Gary, INSat., September 19, 2015For: Used Heavy Equipment

• Cincinnati, OHThurs., September 24, 2015For: Used Heavy Equipment

JAMES G. MURPHY INC. AUCTIONEERSwww.murphyauction.com�800-426-3008

• Port Hadlock, WAFri., September 25, 2015For: Public Auction – Jefferson CountySurplus

• Bellingham, WAWed., September 30, 2015For: Piling Driving Equipment Auction

• Kenmore, WASat., October 3, 2015For: Heavy Equipment, ContractorsEquipment & Vehicles

• Kenmore, WASat., December 5, 2015For: Heavy Equipment & ContractorsAuction

JEFF MARTIN AUCTIONEERS, INC.www.jeffmartinauctioneers.com�601-450-6200

• Harvey, LAWed., September 23, 2015For: One Owner Absolute SilvertonConstruction, LLC

JENNINGS AUCTION GROUP www.jenningsauction.com717-268-0020

• ONLINE ONLYTues., September 22, 2015For: Electrical Contractor RetirementAuction

• Harrisburg, PATues., October 6, 2015For: Electrical Contractor RetirementAuction

• ONLINE ONLYTues., October 22, 2015For: Electrical Contractor RetirementAuction

KEENAN AUCTION COMPANYwww.keenanauction.com207-885-5100

• Chelsea, METhurs., October 22, 2015For: Construction & Aggregate Equipment& more

MANASSE AUCTIONEERSwww.manasseauctions.com�607-692-4540

• Binghamton, NYSat., September 26, 2015For: Broome-Tioga County AnnualSurplus Vehicle & Equipment Auction

MARTIN & MARTIN AUCTIONEERS, INC.www.mmaauction.com864-947-7888

• Columbia, SCWed., September 23, 2015For: One Owner Rental Fleet ReductionAuction

• Whitsett, NCWed., October 28, 2015For: One Owner Rental Fleet ReductionAuction

MOTLEY’S AUCTION GROUPwww.motleys.com�804-232-3300

• Goldsboro, NCTues., October 6, 2015For: Construction Equipment & Trucks

NITKE AUCTIONSwww.nitkeauctions.com�715-693-4447

• Wausau, WIOctober 30-31, 2015For: Wisconsin Contractors 50th AnnualAuction

PETROWSKY AUCTIONEERS INC.www.petrowskyauctioneers.com�860-642-4200

• North Franklin, CTSeptember 25-26, 2015For: Major Public Equipment & TruckAuction

• Bethel, CTFri., October 2, 2015For: Complete Dispersal Auction – BethelSand & Gravel Co.

• Columbus, OHThurs., October 22, 2015For: Major Heavy Equipment & TruckAuction

POWERS AUCTION SERVICEwww.powersauction.com�608-439-5764

• Waukegan, ILSat., October 10, 2015For: Roger Belski Electric Estate Auction

PURPLE WAVE AUCTIONwww.purplewave.com�866-608-9283

• ONLINE ONLYTues., September 22, 2015For: Truck & Trailer Auction

• ONLINE ONLYThurs., September 24, 2015For: Construction Equipment

• ONLINE ONLYThurs., October 8, 2015For: Construction Equipment

• ONLINE ONLYThurs., October 15, 2015For: Rogers Tree & ConstructionRealignment Auction

• ONLINE ONLYThurs., October 22, 2015For: Construction Equipment

QUARRICK EQUIPMENT & AUCTIONS INC.www.quarrickauction.com724-439-1621

• Uniontown, PAThurs., October 1, 2015For: Farm & Construction Equipment

ROGERS REALTY & AUCTION COMPANYwww.rogersauctiongroup.com�800-442-7906

• Charlotte, NCSat., September 19, 2015For: Charlotte/Mecklenburg Rolling StockAuction

• Lexington, NCFri., October 2, 2015For: Construction Equipment

ROLLER AUCTIONEERSwww.rollerauction.com�866-515-1668

• Denver, COWed., November 11, 2015For: Heavy Construction & ContractingEquipment

RTI AUCTIONSwww.teitsworth.com�585-243-1563

• Rochester, NYSat., October 3, 2015For: Monroe County Municipal/ContractorEquipment Auction

SALES AUCTION COMPANY, LLCwww.salesauctioncompany.com�860-627-7506

• Windsor Locks, CTSat., October 3, 2015For: Construction Equipment & more

SHETRON AUCTIONSwww.shetronequipment.com717-532-8828

• Shippensburg, PAFri., October 30, 2015For: Construction & EquipmentConsignment Auction

• Shippensburg, PAFri., December 18, 2015For: Construction & EquipmentConsignment Auction

STEFFES GROUP INC.www.steffesgroup.com�701-237-9173

• Wapello, IAThurs., September 29, 2015For: Retirement Auction

• OCTOBER ONLINE Closes October 14, 2015For: Ag, Construction, Trucks & more

UTILITY AUCTIONSwww.utilityauctions.net�302-530-9103

• Wilmington, DEFri., October 23, 2015For: Construction, Utility & ForestryEquipment

WAYNE PIKE AUCTION COMPANYwww.waynepikeauction.com763-389-2700

• Princeton, MNSat., December 5, 2015For: Heavy Equipment

WILSON’S AUCTION SALESwww.wilsonsauction.com�302-422-3454

• Harrington, DESat., September 19, 2015For: Mid-Atlantic Fall Equipment Auction

WOLFE INDUSTRIAL AUCTIONS, INC.www.wolfeauctions.com�800-443-9580

• York Springs, PAFri., October 16, 2015For: Southern PA Contractors Auction

YODER & FREY AUCTIONEERS, INC.www.yoderandfrey.com�419-865-3990

• Darlington, PAThurs., September 24, 2015For: 12th Fall Consignment Auction

AuctionsComingTo view information on upcoming auctions visit our

Auction Calendar at www.constructionequipmentguide.com


END-OF-QUARTER SALE

ALL-HUMVEE SALE

PERIOD.

SEPTEMBER 24 & 25SEPTEMBER 23

9/30/2015 Hosted by Ziegler

10/21/2015 Hosted by Finning

10/27/2015 Hosted by Cleveland Brothers

11/10/2015 Hosted by Mustang Cat

12/11/2015 Hosted by Cashman

2/9-2/12/2016 Hosted by Ring Power

U.S. MARINE CORPS CONSTRUCTION

EQUIPMENT SALE

SEPTEMBER 22

.S. MARINE CUONSC

EQUIPMENT S

SEPTEMBER 22

T WTHE BES

ORPS.S. MARINE CTRUCTIONONS

ALEEQUIPMENT S

SEPTEMBER 22

O BUY AND SELL USED EQUIPMENT

-HUMVEEALLALES

SEPTEMBER 23

Y TAAY TT W

O BUY AND SELL USED EQUIPMENT

-HUMVEEALE

SEPTEMBER 23

.

END-OF-QUALES

SEPTEMBER 2

O BUY AND SELL USED EQUIPMENT .PERIOD

ARTEREND-OF-QUALE

4 & 25SEPTEMBER 2

Equipment subject to change

w all itieVAll other mark

o change. © 1999-2015 IronPlanet, Inc. All Rights R

tems aw all itAll other marks and brands are the pr

onPlanet, Inc. All Rights Reserved. IronPlanet®, Ir

onPlanet.Ire the property of their respective owners.

onClad Assurance® and Auctions y

omconPlanet.wners.

uctions you can trust® are registered servic

e marks of IronPlanet, Inc.


We now offer low-rate leasing. Apply today.

w offe noWWe no

e leatw-rer low off ffer lo

ly ting. Appsae le

.yy.aodly t

ar D6R | LllerpiatC

seles Ang geleoar D6R | L

3 of 5 – Gr

Saon 4x4x4 | TTon 4x4x4 | T58D 20 e Rvo3 of 5 – Gr

s)ewtleff & Andrrity (Shue Cklt LaSa

s)

u PC300-8 | Lsatom11 K20

seles Ang geleou PC300-8 | L

ac CA3500PD | Lapn5 Dy1sed 202 – Unu

seles Ang geleoac CA3500PD | L

Serie5C 1ar 6llerpiat2006 C

seles Ang geleos II | LSerie

ar D6R llerpiatC

queuquerblXL | Aar D6R

ar D9T | DenllerpiatC

ervar D9T | Den

VHP | Aar 140H llerpiatC

queuquerblVHP | A

135-2 135 e GMK5vo1 of 5 – Gr ro

submluoon 10x6x4 | CTTon 10x6x4 | C135-2 135

T70 70 C86-Belt HTkLintleff & Andrrity (Shue Cklt LaSa

on 8x4x4Ton 8x4x4s)ewtleff & Andr Americ

ity (Shue Cklt LaSaon TTon 60 100 an 72Americ

s)ewtleff & Andrrity (Shu


More Than 2,500 Bidders Vie for Iron at Ritchie Phoenix Sale

Dwight Nelson (L) and Leroy Anderson ofAnderson Contracting Inc., in Solway,Minn., were on hand to bid on excavators.This Outlaw MS400 piqued their interest. Gabriel Lopez of Queen Creek, Ariz., was bidding on this JD 210LE loader.

Jaime Castillobuys and sellsequipment outof Chihuahua,Mexico.

T&H Construction owner Butch Tracey showedinterest in the Komatsu 300LC. T&H is located inPrescott, Ariz.

The CEC Screen-It 6x16 crusher hadthe attention of Bill Nichols, owner ofKilauea Crushers Inc., of Phoenix.

Shane Dikoff (L) of Shane’s Grading & Paving inPhoenix, and Kevin Bakken of Bakken Grading& Paving of Payson, Ariz., inspected the largeselection of excavators up for sale.

Sterling (L) and Chandera Lilly bought this JD210LE to grade their home site in Tucson, Ariz.Daughter Emma looks like a future operator.

The auction featured a large number ofexcavators. Jeremy Mitchell (L) of M&PDemolition in Phoenix, and Tom Randl ofRMC Industrial, also of Phoenix, took along look at several of the machines,including this Komatsu 220.

More than 2,550 bidders participatedonline and in person at RitchieBros. Auctioneers’ multi-million

dollar, unreserved, public equipment auc-tion in Phoenix, Ariz., on Sept. 2, 2015.Bidders came from 44 countries, includ-

ing 48 U.S. states. Approximately 58 per-cent of the equipment was sold to out-of-state buyers, from as far away as Egypt,Sweden and Thailand. Online bidders pur-chased approximately 47 percent of theequipment sold by dollar value.More than 2,050 equipment items and

trucks were sold in the auction, including 45compactors, 30 excavators, 30 loader back-hoes, 40 dump trucks, 85 truck tractors, 145trailers, 110 pickup trucks and more.


THURSDAY, SEPTEMBER 24 @ 11:00 AM FRIDAY, SEPTEMBER 25 @ 10:00 AM

NOTE: This sale will contain equipment from several NationalRental Fleets.

HILITES: 9 HYDRAULIC EXCAVATORS: 2005 KomatsuPC300LC-7, 2007 Komatsu PC200LC-8, Hyundai 360LC, HitachiEX310LC, Hitachi EX200LC, (2) Kobelco SK200LC, 2005 CaseCX210LC, 2008 Volvo ECR88, 4 MOTOR SCRAPERS: (4) Noble 417, 6 RUBBER TIREDLOADERS: 2010 Komatsu WA430-6, 2012 Komatsu WA200, 2012 JD 624K, 2011 JD 244J,2009 Volvo L110E, 2009 JCB 406, 2 CRAWLER TRACTORS: (2) 2010 Komatsu DG1PX-15, 8 TRACTOR LOADER BACKHOES: Cat 420E (4x4), (2) JD 310G (4x4), JD 310C,Case 580M (4x4), Komatsu WB140-2N (4x4), NH 555D (4x4), Volvo LB75 (4x4), 4 VIBRA-TORY ROLLERS: Unused Dynapac CA2500PD, Unused Dynapac CA2500D, UnusedDynapac CA1500D, Cat CP433B, RUBBER TRACKED SKID STEER: 2013 Cat 289C2,FORKLIFT: Kalmar DC100-6, 5 BOOM LIFTS: JLG 660SJ, (3) JLG 600S, JLG 400S, 6AIR COMPRESSORS: (5) 2011-2009 Kaeser 210CFM, SWEEPER: 2005 Roscoe, 3WATER TRUCKS: (3) 2006 Int’l 4200 (s/a), DUMP TRUCK: 2004 Mack CX613 Vision,TRUCK TRACTOR: 2004 Mack CX613 Vision, 2 UTILITY VEHICLES: 2010 Polaris 800,2008 Polaris 700, 6 PRESSURE WASHERS: (6) New Easy Kleen, ATTACHMENTS: SkidSteer: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, New Versatech Grapple Buckets,New Versatech Hay Spears, New Pallet Forks, New Fork Frames, New Versatech BrushGrapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: New Mustang LF88 PlateCompactor, New Mustang MP4800 2in Submersible Pump, New Mustang CV3500 ConcreteVibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. Premium Diamond Blades, NewHuskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, New Stiff Neck Pintle Hitch,New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim Impact Wrench Kit, New 2in. x50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New Auto Darkening WeldingHelmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital 4ft. x 4ft. PlatformScale, New 3/4in. x 50ft. Jack Hammer Air Hose.

DIRECTIONS: From DFW Airport – Hwy 183 West to I-820 West to Exit 13 (Saginaw). Bear right onto North 287 (Main St.) go approx. 6 miles turn right on Hick’s Field Road.

Go 1/2 mile to sale site on right.

Address: 10250 Hicks Field Rd. Saginaw, TX 76179.

TEXAS AUCTION LICENSE: AUCTIONEER #15791 Jack H Lyon

SALE SITE PHONE: (863) 660-3613

RENTAL FLEET AUCTION

DALLAS (FT. WORTH), TX SAN ANGELO, TX

Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauction.com

LATE MODEL CONSTRUCTION, COMPACT RENTAL FLEETEQUIPMENT. TELESCOPIC FORKLIFTS, CRAWLER

TRACTORS, TRACTOR LOADER BACKHOES, RUBBERTIRED LOADERS, BOOM & SCISSOR

LIFTS, SKID STEERS, ATTACHMENTS,SUPPORT, TRUCKS & TRAILERS.

AUCTIONNOTE: Selling will be very late model rental fleet equipment fromseveral national rental fleets including Neff Rentals & HertzEquipment Rentals.

EARLY HILITES: 2 HYDRAULIC EXCAVATORS: 2007Doosan DX225LC, 2010 Doosan DX140R, 2 RUBBER TIREDLOADERS: 2007 Komatsu WA380-6, Cat 924H, 2 CRAWLERTRACTORS: 2006 JD 650JLGP (ripper), JD 450J, 5 TRACTOR LOADER BACKHOES:(2) 2006-2005 Case 580M (4x4), 2006 JD 310 Super G (4x4), 2007 JD 310G (4x4), VIBRA-TORY ROLLERS: New Unused Dynapac CA2500D, 2 TELESCOPIC FORKLIFTS: 2006Gradall 534D9-45, Gradall RS8-42, 6 BOOM LIFTS: (2) 2008 JLG 800AJ (4x4), JLG 600S(4x4), (2) Genie S60 (4x4), Genie S40, 8 LIGHT PLANTS: 2011-2010 Magnum 3060,BOOM TRUCK: 2008 Int’l. 4200 (17.5 ton, s/a), 2 WATER TRUCKS: (2) 2006 Int’l. 4200(s/a), SEWER/ PUMPER TRUCK: 1988 Int’l. (s/a), 3 TRUCK TRACTORS: 2007Kenworth T800 (t/a), 2007 Freightliner CL120 (t/a), 2003 Freightliner Classic (t/a), TAGA-LONG TRAILER: Trailking 11 ton (tri.), 2 PRESSURE WASHERS: (2) New Easy Kleen,ATTACHMENTS: Skid Steer: Smooth, Snow & Mulch Buckets, 60in.- 78in. Buckets, NewVersatech Grapple Buckets, New Versatech Hay Spears, New Pallet Forks, New Fork Frames,New Versatech Brush Grapples, New Stump Buckets, NEW SUPPORT EQUIPMENT: NewMustang LF88 Plate Compactor, New Mustang MP4800 2in Submersible Pump, New MustangCV3500 Concrete Vibrator, New 4 Pack 10lb. Ratchet Straps, New 3pc. 14in. PremiumDiamond Blades, New Huskie 11218SDS Hammer Drill, New Huskie B65 Jack Hammer, NewStiff Neck Pintle Hitch, New 1in. Drive Air Impact Wrench, New 1/2in. Drive Aim ImpactWrench Kit, New 2in. x 50ft. Discharge Water Hose, New 3pc. Air Spray Gun Kit, New AutoDarkening Welding Helmet, New 3/8in. x 50ft. Automatic Air Hose Reel, New 5 Ton Digital4ft. x 4ft. Platform Scale, New 3/4in. x 50ft. Jack Hammer Air Hose.

DIRECTIONS: From San Angelo Regional Airport (10 miles): Hanger Rd. to Knickerbocker Rd., stay on Knickerbocker and take TX-306 Loop E to Strawn Rd.

Left onto Strawn Rd.

Address: 808 Strawn Rd. San Angelo, TX 76904.

TX AUCTION LICENSE: AUCTIONEER #15791 Jack H Lyon

Hertz Equipment Rentals

Neff Rentals

2 AUCTIONS IN ONE DAY!RENTAL RETURNS OF LATE MODEL CONSTRUCTIONEQUIPMENT, AERIAL LIFTS, FORKLIFTS, TRUCKS, &TRAILERS. PLUS A RECENT JOB COMPLETION: GROUP OF LATE

MODEL CAT & DOOSAN EQUIPMENT. AUCTION


WSM Auctioneers Holds Monthly Auction in Phoenix

Isaac Guerro of Phoenix is looking at lighting forhis soccer league facilities. This Allmand portablelight plant caught his eye.

With a huge selection of light towers for sale,Jake Watson of CWB Industries in Glendale, Ariz.,bid on this Magnum unit.

Clerk Gina Ecobedo (L) and auctioneer ChrisHuisman take bids at the recent WSM Auction inPhoenix.

Among the skid steers up for sale, this Casemachine caught the eye of Joel Bernal. Bernalowns Jober Construction of Chandler, Ariz.

Freddy Miranda of Pine Ice in Payson, Ariz., checks out the largenumber of light towers being offered for sale.

David Jaworski checks out this Cat416B backhoe loader for use on hisWittman, Ariz., ranch.

IDT Landscaping ownerRaul Chacon of Tempe,Ariz., bid on the VermeerBC1400 chipper.

A nice selection of loaders could be found at the WSM Auctioneerssale in Phoenix.

WSM Auctioneers held its monthly auction on Sept. 12. A large number of utility trucks,bucket trucks and other fleet vehicles were sold, in addition to a wide variety of construc-tion equipment and other construction materials.


To view our Business Calendar online, go to www.constructionequipmentguide.com.

American Oil & Gas Events/Conferences 2015Toll Free: 800/847-8301 or 316/788-62712015 CALENDAR OF EVENTS:September 20-22: 65th Annual Gulf Coast Association of GeologicalSocieties and the Gulf Coast Section of SEPM Annual Convention

George R. Brown Convention Center, Houston, TX (512) 471-0328

September 21-23: North Dakota Petroleum Council Annual MeetingRamada Plaza Hotel and Conference Center, Fargo, ND (701) 223-6380

September 21-24: American School of Gas MeasurementMarriott Westchase Hotel, Houston, TX (877) 847-0889

September 24: KOGA’s West Kentucky MeetingConvention Center, Owensboro, KY (502) 226-1955

September 24-25: Fourth Annual Frac Sand Supply & LogisticsConference

JW Marriott Hill Country Resort, San Antonio, TX (888) 906-9898 September 27-30: IOGAWV Sports Weekend

Lakeview Resort, Morgantown, WV (304) 344-9867 September 28-30: Society of Petroleum Engineers Annual TechnicalConference & Exhibition

George R. Brown Convention Center, Houston, TX (972) 952-9393

September 28-29: Platts 10th Annual Pipeline Development andExpansion Conference

Hilton Post Oak Hotel, Houston, TX (800) 752-8878September 28-30: Interstate Oil & Gas Compact Commission AnnualConference

Skirvin Hotel, Oklahoma City, OK (405) 525-3556 October 4-6:

New Mexico Oil & Gas Association Annual meeting, EldoradoHotel, Santa Fe. (505) 982-2568

October 5-7:IPAA Oil & Gas Investment Symposium, The Palace Hotel, SanFrancisco. (800) 433-2851

October 6-7:Arkansas Independent Producers & Royalty Owners AssociationAnnual Meeting, Embassy Suites, Little Rock, AR. (501) 975-0565

October 7-9:NOIA Fall Meeting, The Phoenician, Scottsdale, AZ. (202) 347-6900

October 8:19th Annual Oklahoma Oil & Gas Expo, State Fairgrounds,Oklahoma City. Sustaining Oklahoma’s Energy Resources. (405)601-2190

October 8:Indiana Oil & Gas Association Annual Meeting, TropicanaConvention Center, Evansville, IN. (812) 838-8515

October 13-15:SPE Eastern Regional Meeting, Morgantown, W.V. (972) 952-9393

October 14:IPAA/TIPRO Leaders in Industry Luncheon, Petroleum Club ofHouston. (832) 233-5502

October 14-15:Permian Basin Petroleum Association Annual Meeting, PetroleumMuseum and Petroleum Club, Midland. (432)684-6345

AED FoundationEstablished in 1919, Associated Equipment Distributors (AED) is an interna-tional trade association based in Oak Brook, IL, representing over 800 con-struction equipment distributors, manufacturers and industry-service firmsnationwide. AED members sell, service and rent equipment to such marketsas heavy and light construction, mining, agriculture, forestry, aggregates,engines and industrial. Established in 1991 and directed by AED members,The AED Foundation addresses professional education and workforce devel-opment in the industry. This includes AED Accreditation of diesel-equipmenttechnology college programs. Contact information: The AED Foundation,600 22nd Street, Suite 220, Oak Brook, IL 60523. Phone: 630/574-0650; HYPERLINK "mailto:[email protected]" [email protected].

Forum: 2015 AED/CDK Global Executive ForumDates: September 23, 2015 to September 25, 2015Time: September 23 at 6 PM to September 25 at 12 PM(Central Time US & Canada)Place: Schaumburg, IL Event Type: Annual ConferenceCategory: Educational SeminarDescription: 2015 AED Executive Forum: The Equipment Industry’sLeading Event for Dealer Principals and Executive Staff

Webinar: Converting Inquires to Sales & RentalsDate: October 22, 2015Time: 10:00 AM to 1:00 PM (Central Time US & Canada) Event Type: WebinarCategory: Educational SeminarDescription: Every inquiry is an opportunity. It is an opportunity toimpress and an opportunity to close a sale. It is important to take advan-tage of that opportunity. This dynamic and interactive webinar providesyour inside sales team the why and how of providing exceptional cus-tomer service while behind the counter and on the phone. You will gainunique skills and tools that you can use to deliver exceptional customerservice that go beyond ‘order-taking’.

ICUEE – the EMO EXPO 2015The International Construction and Utility Equipment ExpositionDATE: September 29, 2015 to October 1, 2015Venue: Kentucky Exposition Center, Louisville, United StatesICUEE, also known as The Demo Expo, is the largest event in NorthAmerica for utilities and utility contractors seeking new equipment, tech-nologies, and best practices for construction and rehabilitation projects.With 25 acres of exhibits to explore, attendees can comparison shop morethan 800 suppliers through equipment test drives and interactive productdemonstrations. At ICUEE 2015, attendees will have an opportunity to:. Visit with more than 850 leading manufacturers.. Explore the latest utility products and innovations.. Operate construction and utility equipment in job-like conditions.. “Test run” the products specific to your operation’s needs in a variety ofways, including:

. Specialized exhibit pavilions for fleet management, safety and green util-ity.

. A 2-mile Ride & Drive test track (for on-road equipment and technolo-gies).

. An Indoor Demo Stage

. Extensive in-booth exhibitor product demos

. Learn from the pros!

. Attend sessions to help you better understand the latest technologies andissues that are impacting the way you do business.

. Talk directly to technical experts and equipment designers who cananswer your industry-specific questions.

Customer service: ICUEE’s customer service team is here to assist you!Hours: 8 AM to 4:30 PM (Central Time, USA)PHONE: US and Canada: Toll Free: 800/867-6060; email:[email protected]

OHIO FORESTRY ASSOCIATION PRESENTS “THE ORIGINAL AMERICANFORESTRY SHOW”OFFICIAL PAUL BUNYAN SHOW

DATES: OCTOBER 2-4, 2015TIME: 8:00 AM TO 5:00 PM FRIDAY AND SATURDAY

9:00 AM TO 3:00 PM SUNDAYPLACE: GUERNSEY COUNTY FAIRGROUNDS

335 OLD NATIONAL ROADOLD WASHINGTON (CAMBRIDGE), OH 43768

ADMISSION PRICES: $8 – ADULTS – $4 - SENIORS (60 & OVER) & KIDS(7 - 12) CHILDREN 6 & UNDER – FREE!!!NO PETS ALLOWED! THERE WILL BE FORESTRY EQUIPMENT RUNNINGLIVE THROUGHOUT THE GROUNDS AND IT IS A VERY LOUD AND SCARYPLACE FOR PETS! PLEASE LEAVE YOUR PET AT HOME! NO UNAUTHO-RIZED VEHICLES, ATV’S OR PERSONAL GOLF CARTS ALLOWED ON SHOWGROUNDS. SHOW INFORMATION INCLUDES: ACTIVITIES,COMPETITIONS, EXHIBITORS, LODGING/DINING, EXHIBITING INFORMA-TION AND VOLUNTEERS. PAUL BUNYAN SHOW IS A THREE-DAY EVENT.THE MAIN AIM OF THE SHOW IS TO PROVIDE ACCESS TO KNOWLEDGEAND TECHNOLOGY THAT WILL ENHANCE THE QUALITY OF LIFE OF INDI-VIDUALS, FAMILIES, INDUSTRIES AND COMPANIES. THE EVENT ISORGANIZED BY THE OHIO FORESTRY ASSOCIATION, INC., THAT SUP-PORTS THE FOREST RESOURCES AND IMPROVEMENT OF BUSINESSCONDITIONS OF ITS MEMBERS. PAUL BUNYAN SHOW IS BASED ON THERESEARCHES OF DIFFERENT INDIVIDUALS AND COMPANIES. FOR MORE INFORMATION, PLEASE CONTACT OHIO FORESTRY ASSOCIA-TION. PHONE: 614/497-9580, FAX: 614/497-9581, EMAIL: [email protected]

N.Y.S. HIGHWAY & PUBLIC WORKS EXPOProduced by SUPERINTENDENT’S PROFILEN.Y.S. Superintendent’s Profile & Product-Service DirectoryDATE: WEDNESDAY – OCTOBER 21, 2015TIME: 8:30 AM to 3:00 PMPLACE: CENTER OF PROGRESS BUILDING

N.Y.S. FAIRGROUNDS/SYRACUSE, NY For more information on this event, please contact Profile Publications,N.Y.S. Superintendent’s Profile:NAME: Bob BuckleyTELEPHONE: 800/992-7116 / 518/863-4100 FAX: 518/863-7100EMAIL: [email protected]

GIE+EXPO: The Green Industry & Equipment Expo The Largest Show for Your Industry – GIE+EXPO 2015Dealer Day: October 21, 2015All Attendees: October 22-23, 2015Tradeshow Location: Kentucky Exposition Center

937 Phillips LaneLouisville, Kentucky 40209

Three Nights of Free Concerts! Two tradeshows – GIE+EXPO andHardscape North America – co-located in one central location, provideyour No. 1 opportunity to see what your industry is buzzing about. The19-acre Outdoor Demonstration Area, within easy walking distance of theindoor exhibits, and the New Products Showcase make these prestigiousshows an exceptionally efficient, productive marketplace. See outdoorpower equipment, along with products for landscapes, gardens, outdoorleisure, hardscapes and light construction.Future Show Dates: October 19-21, 2016 – October 18-20, 2017 –October 17-19, 2018For more information, contact by Phone: (800) 558-8767 or (812) 949-9200 and Fax: (812) 949-9600, Email: [email protected]

PIOGA (Pennsylvania Independent Oil & Gas Association) Eastern Oil & Gas Conference & Trade ShowDATES: OCTOBER 27 – 28, 2015 PLACE: Monroeville Convention Center in Monroeville, PAThe time of year is new, but the venue will be familiar to most of ourexhibitors. The Monroeville Convention Center has lots to offer: a con-venient location, free parking, a good layout and reasonable lodging costs.We’re even rolling back our booth prices to 2013 levels! We hope you willtake the opportunity to again participate in the region’s longest-runningtrade show organized by the exploration and production industry for theE&P industry. For more information, contact The Pennsylvania Independent Oil and GasAssociation, 115 VIP Drive, Suite 210, Northridge Office Plaza II, Wexford,PA 15090-7906. PHONE (724) 933-7306; FAX (724) 933-7310.

OSHA for Oil and Gas: Regulations, Auditing and EnforcementDATE: OCTOBER 29, 2015PLACE: Houston, Texas In OSHA for Oil and Gas, we review safety auditing best practices, employ-ee and contractor safety as well as the Occupational Safety and HealthAct’s (OSHA’s) regulations and enforcement initiatives. There is a series ofrulemaking proceedings currently underway (e.g., silica, electronic record-keeping, and reporting) as well as soon-expected rulemaking (e.g., fallprotection, clarification of recordkeeping retention requirements, and com-bustible dust) and RFIs that potentially affect the industry (e.g., processsafety management). There are also a number of OSHA initiatives outsideof the rulemaking context, such as National Emphasis Programs andAwareness Campaigns. Given the high risk of oil and gas work, the diver-sity of projects, the remote nature of the operations, and the fact that manyemployees and supervisors are new to this industry, there is a critical needto expand safety auditing to ensure best practices across all sectors of thesupply chain, from upstream drillers, well servicing teams, and track crewsat the well site to pipeline construction crews and operators and refineryworkers. The goal of this course is to provide guidance to oil and gasindustry, with an emphasis on health and safety regulations, compliance,and enforcement trends. This Course is Useful For:. Project managers. HSE professionals. Regulatory professionals. Individuals new to oil and gas regulatory investigations & OSHA. Energy lawyers. Oil & gas engineers. In-house counsel. Risk managersFor more information on this course, contact Kinetic at (720) 491-1173; Website: http://becomekinetic.com. Email: [email protected].

BusinessCalendar

Why Wait?

Auctions Every Month

Sell your equipment with WSM.

1616 S. 67th Ave. • Phoenix, AZ 85043Call Today (623) 936-3300www.wsmauctioneers.com

Specializing in:• Construction Equipment • Utility Trucks• Light Trucks• Equipment Trailers

2nd Saturday of every month.

Next AuctionSat. October 10

Hawthorne Cat Expands Campus By Adding Engine, Generator Test Centerengine and generator test center willinclude engine flywheel dynamometertesting up to 4,250 hp, indoor generatorresistive/reactive load bank testing up to3,300 kW, outdoor generator testing upto 8,000 hp and truck chassisdynamometer testing of up to 1,000 hp.A 20 ton (18 t) crane system also will beadded to the existing weld and fabrica-tion building, allowing generators to bemoved for testing and placed into ISOcompliant containers.

Additionally, Hawthorne Cat willcentralize its power systems operations,including sales, power rental, field serv-ices, truck services and administrationat the expanded campus. The transitionwill begin in October 2015, with fulloccupancy expected by early 2016.

According to Kirk Fowkes, vicepresident of Hawthorne’s PowerDivision, “Caterpillar’s output capabili-ties keeps growing and this moderniza-tion provides Hawthorne with industry-leading premier assets. This significantfacility expansion will provide

unmatched customer resources.”Hawthorne Cat is the authorized

dealer for Cat construction and powerequipment in San Diego, Hawaii,Guam, Saipan and American Samoa.Hawthorne sells, rents, provides partsand service, training and emission solu-tions to various industries includinggeneral building construction, land-

scaping, marine, trucking, paving,power generation and other engine-related markets.

For more information, visithttp://www.hawthornecat.com.

(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)

HAWTHORNE from page 1

(L-R) are Tami Barnhart-Reese, Barnhart-Reese Construction Inc. presi-dent; West Reese, Barnhart-Reese Construction Inc, CEO; Tee Ness,Hawthorne Cat president/CEO;�David Ness, Hawthorne Cat seniorVP/COO.


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

ALEX LYON & SONS INC

DALLAS TX / SAN ANGELO TX....................................53

ALLU GROUP ........................................................................35

ARTIC SNOW & ICE CONTROL ..........................................36

ATI CORPORATION/LEVEL-BEST........................................37

BAR NONE AUCTION

PORTLAND OR..............................................................55

BARGAINS..............................................................................46

CATERPILLAR INC ..........................................................16,17

CEG SCALE MODELS ..........................................................11

CLASSIFIEDS ........................................................................46

CONSTRUCTION EQUIPMENT GUIDE

WANTED ........................................................................47

DOOSAN INFRACORE AMERICA CORP........................24,25

DOOSAN PORTABLE POWER ............................................38

DYNAPAC ..............................................................................26

EQUIFY AUCTIONS LLC

CISCO TX ......................................................................57

FELLING TRAILERS ..............................................................45

FLANGE LOCK ........................................................................8

FLECO ATTACHMENTS ........................................................37

FLUID CONTROL SERVICES ................................................6

GROVE CRANE ....................................................................59

HENDRIX MACHINERY LLC ..................................................3

HISTORICAL CONST EQUIPMENT........................................6

HYDRAULICIRCUIT TECHNOLOGY ....................................35

IROCK CRUSHERS ..............................................................22

IRONPLANET ........................................................................49

JAMES G. MURPHY COMPANY

KENMORE WA ..............................................................55

KAWASAKI CONSTRUCTION MACHINERY........................39

KIRBY-SMITH MACHINERY INC ............................................2

KOBELCO ..............................................................................27

KOMATSU AMERICA CORP ......................................6,7,28,29

KPI-JCI ....................................................................................22

LINK-BELT EXCAVATORS................................................30,31

LIUGONG CONSTRUCTION MACHINERY..........................60

MAXIMUM CORP ....................................................................6

MB AMERICA INC ..................................................................37

METSO MINERAL SCREENING ..........................................15

METSO MINERALS CRUSHING ..........................................23

NORAM..............................................................................40,41

NPK CONSTRUCTION EQUIPMENT INC..............................9

RANSOME EQUIPMENT SALES LLC ..................................47

REMU SCREENING TECHNOLOGY....................................20

RITCHIE BROS. AUCTIONEERS ....................................50,51

ROAD BUILDERS MACHINERY ........................................5,35

SANDVIK MINING & CONSTRUCTION................................34

SENNEBOGEN ......................................................................21

SULLAIR ................................................................................42

THE SCREEN MACHINE ......................................................16

WEIR MINERALS ..................................................................19

WSM AUCTIONEERS ............................................................56

To read articles about these CEG advertisers, visit www.constructionequipmentguide.com


The GMK6300L all-terrain crane

For more information, visit www.manitowoccranes.com

Need Financing?

At Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 17 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite.

Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.

Tilt cab

MEGATRAK™

Removable outrigger box

8600 Calabash Ave.Fontana, CA 92335562-286-6618

Fax: 909-356-1340275 W. Larch RoadTracy, CA 95304209-597-3824

19602 60th Avenue NEArlington, WA 98223253-254-7950

91-210 Kalaeloa Blvd.Kapolei, HI 96707808-682-7263

5801 Silverado WayAnchorage, AK 99518855-342-72633521 Alken Street

Bakersfield, CA 93308855-927-2637

Western Pacific Crane & Equipmentwww.wpcrane.com

Kirby-Smith Machinery, Inc.www.kirby-smith.com

Oklahoma City, OK800-375-3339Tulsa, OK

800-375-3733Kansas City, KS877-851-5729St. Louis, MO866-279-1392


We make one of the broadest lines of construction, mining, road

building and material handling equipment in the world. All

backed by top-notch warranty, training, parts and service

support. Contact your local dealer today for more information...

T O U G H W O R L D . T O U G H E Q U I P M E N T.www.liugongna.com

Dearler 1Houston, TX

p. (555) 555 - 5555www.dealersite.com

Dealer 2Austin, TX


Dealer 3Dallas, TX


Dealer 4San Antonio, TX


EVERY JOB.EVERYWHERE.

Noble Equipment

505 Rankin Road • Houston, TX 77073

281-443-7667 • Fax 281-443-7886

www.nobleiron.com

Westrax Machinery

www.westraxmachinery.net

19618 South Susana RoadRancho Dominguez, CA 90220

310-605-2900 • Fax: 310-631-2775

19885 Temescal Canyon RoadCorona, CA 92881

951-732-6781

West 19 2015

Documents

Transcript of West 19 2015