Well Head Equipments Xmas Tree
Transcript of Well Head Equipments Xmas Tree
WELL HEAD EQUIPMENTS & XMAS TREE
API spec 6A
Tel
Http://www.rigsolution.comrigsolution.com
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
OILMAN RIG CO.,LTD
OILMAN
All WELL HEAD EQUIPMENTS & XMAS TREES products are supplied by Oilman and manufactured by
Chinese factories. These products are completely manufactured according to API Standard, and these
factories acquired the certificate of ISO Quality Management System.
WHT Wellhead Equipments & X-mas Trees
WHT 01 BS Casing head housing
WHT 02 BS Casing spool
WHT 03 BS Casing hanger
WHT 04 BS S Tubing spool
WHT 05 BS Tubing hanger
WHT 06 BS ESP Wellhead and X-mas tree
WHT 07 SK YS Dual tubing solid block X-mas tree
WHT 08 SK YS Single assembled completed solid block X-mas tree
WHT 09 SK ESP X-mas tree with cable penetration device
WHT 10 SK KQ Production wellhead equipment
WHT 11 SK KR Vapor production wellhead equipment
WHT 12 SK SL- Y Tubing head spool
WHT 13 SK S- YY Tubing head spool
WHT 14 SK DP Type & EP Type Tubing hanger
WHT 15 SK SSLRT Double tubing type tubing hanger
WHT 16 SK S & S-Y Casing hang equipment
WHT 17 SK Casing head
WHT 18 SK SB Casing hanger
WHT 19 SK SY Intermediate casing head
WHT 20 SK SL-Y Intermediate general well head
WHT 21 SK Type Y Pack-off flange
WHT 22 SK Type YY Pack-off flange
WHT 23 SK 6B & 6BX Flange
WHT 24 SY TFZ35-70A Series Casing head
WHT 25 SY Producing oil (or gas ) well head
WHT 26 SY X-mas tree(for oil or gas) and tubing heads
WHT 27 DQG KYJ(F) 16-24.5/65 Pumping unit well wellhead
VAL Valve
VAL 01 SY Non-rising stem slab gate valve
VAL 02 SY Rising stem slab gate valve
VAL 03 SY Hydraulic plate valve
VAL 04 SY Hydraulic drive safety valve
VAL 05 SY Gate valve
VAL 06 SY Check valve
VAL 07 SY Manual choke valve
VAL 08 SY Hydraulic choke valve
VAL 09 SY Positive choke valve
VAL 10 SY Manual orifice choke valve
VAL 11 SY Hydraulic orifice choke valve
WARRANTY
OILMAN warrants its products to be free from defects in materials, quantity and quality under normal
use and services for one year from the date of shipment. The liability for any defects shill be limited to
the repair or replacement of such products, or at the option of OILMAN the refunding of purchase pri-
ces. This warranty is expressly in lieu of all other warranties and representations, expressed or implied,
and all other obligations or liabilities on the part of OILMAN, which shall not be liable for any damages
overstepping this warranty. Any controversy or dispute arising out of the sale of OILMAN products
shall be arbitrated in accordance with Laws and regulations of P.R. of China.
REMARKS
All trademarks, trade names and part numbers are for identification purposes only.
21
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
BS Well Head Equipments and X-mas Trees
These products are manufactured by API 6A. Maximum working pressure of the well head equipments is 105
MPa, maximum hanging load is 300 t.
BS Casing head housing
Features:
BS casing head housing is a standard type, which accepts the BS casing hanger, to allow variation in casing
programs and well conditions. Top flange accords with API 6B/6BX. Casing head housing uses thread or weld-
ing bottom connection.
BS Casing spool is forging or casting, its mechanical property
reaches API Spec.6A requirements for wellhead equipment. It
has high operating pressure and safe reliability. The top flange
and the bottom flange reach API 6B or API 6BX requirements.
BS Casing head housing (WHT01)
BS Casing spool (WHT02)
Flange
size
9"
9"
11"
11"
11"
11"
11"
11"
11"
13 5/8"
13 5/8"
13 5/8"
21 1/4"
20 3/4"
Working pressure
psi
2000/3000
3000
2000/3000
3000
5000
10000
2000/3000
3000
5000
2000/3000
3000
5000
2000
3000
Casing
size
8 5/8"
8 5/8"
9 5/8"
9 5/8"
9 5/8"
9 5/8"
10 3/4"
10 3/4"
10 3/4"
13 3/8"
13 3/8"
13 3/8"
20"
20"
A
mm (in)
450(17.72)
450(17.72)
475(18.7)
475(18.7)
490(19.29)
525(20.67)
475(18.7)
475(18.7)
490(19.29)
480(18.9)
480(18.9)
490(19.29)
500(19.69)
515(20.28)
B
mm (in)
203(7.99)
203(7.99)
230(9.06)
230(9.06)
230(9.06)
225(8.86)
254(10)
254(10)
254(10)
315(12.4)
315(12.4)
315(12.4)
485(19.09)
485(19.09)
C
mm (in)
230(9.06)
230(9.06)
280(11.02)
280(11.02)
280(11.02)
280(11.02)
280(11.02)
280(11.02)
280(11.02)
346(13.62)
346(13.62)
346(13.62)
525(20.67)
525(20.67)
Bottom flange
(in-psi)
13 5/8-2000
13 5/8-2000
13 5/8-3000
13 5/8-3000
13 5/8-5000
13 5/8-5000
13 5/8-10000
13 5/8-10000
20 3/4-3000
21 1/4-2000
21 1/4-2000
Top flange
(in-psi)
11-2000
11-3000
11-3000
11-5000
11-5000
11-10000
11-10000
135/8-10000
135/8-5000
135/8-3000
135/8-5000
Studded
outlet(in-psi)
2 1/16-2000
2 1/16-3000
2 1/16-3000
2 1/16-5000
2 1/16-5000
21/16-10000
21/16-10000
21/16-10000
2 1/16-5000
2 1/16-3000
2 1/16-5000
A
mm(in)
610(24.02)
610(24.02)
630(24.8)
635(25)
620(24.41)
620(24.41)
710(27.95)
780(30.71)
640(25.2)
680(26.77)
690(27.17)
B
mm(in)
230(9.06)
230(9.06)
230(9.06)
252(9.92)
230(9.06)
225(8.86)
225(8.86)
315(12.4)
315(12.4)
315(12.4)
315(12.4)
C
mm(in)
280(11.02)
280(11.02)
280(11.02)
280(11.02)
280(11.02)
280(11.02)
280(11.02)
346(13.62)
346(13.62)
345(13.58)
345(13.58)
D
mm(in)
340(13.39)
340(13.39)
340(13.39)
340(13.39)
340(13.39)
340(13.39)
355(13.98)
390(15.35)
306(12.05)
340(13.39)
340(13.39)
C
BS Casing head housing
Bosttom connection
Bs Casing spool
Bs Casing spool
43
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
- The″controlled friction″slip structure provides maximum casing load and minimum radial loading, espe-
cially available for thin wall casing.
- Depending on the casing load through slip, the primary seal packing can be energized by itself to seal annu-
lus space.
BS Tubing hanger has three types: S, WA and MH.
- S tubing hanger has three kinds of structure: non-extended neck, extended seal-neck and extended
seal- neck with control line.
- WA tubing hanger is a wrap-around tubing hanger to seal the annulus space between the casing string and
tubing. It is used with MH mandrel type hanger or tubing head adapter.
- MH tubing hanger is a mandrel-type tubing hanger that is assembled with adapter by buttress thread. WA
tubing hanger must be installed bellow the MH tubing hanger. On requests of customers, MH tubing
hanger can be provided with back pressure valve threads in the bore.
BS S Tubing spool is a straight bore design available with top
flange of 7 1/16"nominal size for single tubing completions
and 11" nominal size for electrical submersible pump comple-
tion and dual tubing completion. The working pressure ranges
from 14MPa(2000psi) to 70MPa(10000psi).
BS Casing hanger
Features:
BS Tubing hanger (WHT05)
BS Casing hanger (WHT03)
BS S Tubing spool (WHT04)
Size
in
11x5
11x5 1/2
11x7
13 5/8x5 1/2
13 5/8x7
13 5/8x9 5/8
20 3/4x13 3/8
Bottom flange
in-psi
9-2000
9-2000/3000
9-3000
9-3000
11-2000
11-2000
11-3000
11-3000/5000
11-5000
11-5000
11-10000
13 5/8-3000
13 5/8-3000
13 5/8-5000
Tubing hanger type
S, S-I, S-II
MH
WA
O.D.(mm)
175
150
175
Tubing size (in)
EUE(2 3/8,2 7/8, 3 1/2, 4 1/2)
NEW WAM(2 7/8, 3 1/2)
EUE(2 3/8,2 7/8, 3 1/2, 4 1/2)
NEW WAM(2 7/8, 3 1/2)
EUE(2 3/8,2 7/8, 3 1/2, 4 1/2)
Top flange
in-psi
71/16-2000
71/16-3000
71/16-3000
71/16-5000
71/16-2000/3000
71/16-3000
71/16-3000
71/16-5000
71/16-5000
71/16-10000
71/16-10000
11-3000/5000
11-5000
11-5000
Studded outlet
in-psi
21/16-2000
21/16-3000
21/16-3000
21/16-5000
21/16-2000
21/16-3000
21/16-3000
21/16-5000
21/16-5000
21/16-10000
21/16-10000
2 1/16-3000
2 1/16-5000
2 1/16-5000
A
mm(in)
500(19.69)
500(19.69)
500(19.69)
550(21.65)
500(19.69)
500(19.69)
550(21.65)
600(23.62)
600(23.62)
620(24.41)
620(24.41)
600(23.62)
600(23.62)
620(24.41)
B
mm(in)
162(6.38)
162(6.38)
162(6.38)
162(6.38)
162(6.38)
162(6.38)
162(6.38)
160(6.30)
160(6.30)
160(6.30)
160(6.30)
230(9.06)
230(9.06)
230(9.06)
C
mm(in)
180(7.09)
180(7.09)
180(7.09)
180(7.09)
180(7.09)
180(7.09)
180(7.09)
180(7.09)
180(7.09)
180(7.09)
180(7.09)
280(11.02)
280(11.02)
280(11.02)
D
mm(in)
240(9.45)
240(9.45)
240(9.45)
255(10.04)
240(9.45)
240(9.45)
255(10.04)
285(12.22)
285(12.22)
288(11.34)
288(11.34)
385(15.16)
385(15.16)
390(15.35)
A
mm(in)
275(10.83)
275(10.83)
275(10.83)
340(13.39)
340(13.39)
340(13.39)
520(20.47)
B
mm(in)
128(5.04)
141(5.55)
180(7.09)
141(5.55)
180(7.09)
247(9.72)
343(13.5)
BS Casing hanger
BS S Tubing spool
S-I
BS Tubing hanger
BS X-mas tree BS ESP Wellhead
S-IIS
65
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
BS ESP Wellhead and X-mas tree (WHT06)It is available with casing size 7" and 9 5/8". Its operating pressure is up to
5000psi.
Features:- Designing, manufacturing and quality control are in accordance with API Spec 6A latest edition.
- Designed for production of land and offshore cluster well, is available
with flowing production or ESP production.
- Non-integral cable penetrator is used to seal the cable of ESP.
- Integral composite valve of main body provides compact volume suitable
for cluster well.
Pneumatic safety valve is usually opened at outlet of X-mas tree, and it
can be automatically closed when emergency happens.
SK Well Head Equipments and X-mas Trees
SK YS Single tubing assembled completed solid block X-mas tree According to the special conditions of offshore oilfield and onshore oil-
field, production wellhead equipment can be designed as packaged style
or unitized style. The product can meet all kinds of field requirements and
different well conditions. The product accords with API specification.
SK YS Dual tubing solid block X-mas tree can produce oil from different
formation in the same time that is composed of main valve, combination
valve, X-mas tree and so on.
SK YS Dual tubing solid block X-mas tree (WHT07)
Specification
in
2 1/16X2 9/16
2 9/16X2 9/16
2 9/16X3 1/8
3 1/8X3 1/8
3 1/8X4 1/16
3 1/16X3 1/16
4 1/16X4 1/16
Working
pressure
psi
3000
5000
10000
3000
5000
10000
3000
5000
3000
5000
3000
5000
10000
15000
10000
15000
Tubing
size
in
2 3/8X2 7/8
2 3/8X2 7/8
2 3/8X2 7/8
2 7/8X2 7/8
2 7/8X2 7/8
2 7/8X2 7/8
2 7/8X3 1/2
2 7/8X3 1/2
3 1/2X3 1/2
3 1/2X3 1/2
3 1/2X4
3 1/2X4
3 1/2X4
3 1/2X4
4X4
4X4
Main valve flange
connection
size
Both flange
7 1/16-3000
7 1/16-5000
9-10000
9-3000
9-5000
9-10000
9-3000
9-5000
9-3000
9-5000
11-3000
11-5000
9-10000
9-15000
11-10000
11-15000
OD (in)
7 5/8
7 5/8
7 5/8
8 5/8
8 5/8
8 5/8
9 5/8
9 5/8
9 5/8
9 5/8
10 3/4
10 3/4
9 5/8
9 5/8
13 3/8
13 3/8
Lb/ft
29, 33.7
29, 33.7
29, 33.7
49
49
49
47
47
32.2
47
65.7
65.7
47
47
72
72
Top
9-3000
9-5000
11-10000
11-3000
11-5000
11-10000
11-3000
11-5000
11-3000
11-5000
13 5/8-3000
13 5/8-5000
11-10000
11-15000
13 5/8-10000
13 5/8-15000
Bottom
11-3000
11-5000
13 5/8-10000
13 5/8-3000
13 5/8-5000
13 5/8-10000
13 5/8-3000
13 5/8-5000
13 5/8-3000
13 5/8-5000
20-3000
20-5000
20-5000
20-5000
20-5000
20-5000
Working
pressure
psi
3000
5000
10000
15000
Bore
in
2 1/16
2 4/16
3 1/8
4 1/16
2 1/16
2 9/16
3 1/8
4 1/16
2 1/16
2 9/16
3 1/16
4 1/16
2 1/16
2 9/16
3 1/16
4 1/16
Tubing size
in
2 3/8
2 7/8
3 1/2
4
2 3/8
2 7/8
3 1/2
4
2 3/8
2 7/8
3 1/2
4
2 3/8
2 7/8
3 1/2
4
Casing size
in
7
7
9 5/8
9 5/8
7
7
9 5/8
9 5/8
7
7
9 5/8
9 5/8
7
7
9 5/8
9 5/8
Top
9-3000
9-3000
11-3000
11-3000
9-5000
9-5000
11-5000
11-5000
9-10000
9-10000
11-10000
11-10000
9-15000
9-15000
11-15000
11-15000
Bottom
11-3000
11-3000
13 5/8-3000
13 5/8-3000
11-5000
11-5000
13 5/8-5000
13 5/8-5000
11-10000
11-10000
13 5/8-10000
13 5/8-10000
11-15000
11-15000
13 5/8-15000
13 5/8-15000
Tubing head spool flange
connection size(in-psi)
Casing
size
Tubing headcross flangeconnection
size
SK YS Single tubing assembled completed solid block X-mas tree (WHT08)
SK YS Dual tubing solid block
X-mas tree
SK YS Single tubing assembled
completed solid block X-mas tree
87
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
SK ESP X-mas tree with cable penetration device (WHT09)
It is very convenient to change the flowing well to pumping
well by using SK ESP X-mas tree with cable penetration de-
vice under wellhead equipment is not change.
SK KR Vapor production wellhead equipment is composed of X-mas tree
and tubing head spool that is a key equipment for producing heavy oil. The
working temperature can reach 380℃.
SK KQ Production wellhead equipment is combined with
PF parallel slide valve. The highest working pressure of the
product is 105MPa.
SK KQ Production wellhead equipment (WHT10)
Model (Order code)
Working pressure ( MPa)
Bore (mm)
Working temperature (℃)
Working medium
Main valve
Wing valve
By-pass valve
Tubing head spool top
flange
Tubing head spool bottom
flange
KQ 105/65 (WHT1001)
105
65
-29~121
Oil, Gas
PF105-65
PF105-65
PF105-65
180mm-150MPa
(7 1/16"-15000psi)
180mm-150MPa
(7 1/16"-15000psi)
KQ70/65 (WHT1002)
70
65
-29~121
Oil, Gas
PF70-65
PF70-65
PF70-65
180mm-70MPa
(7 1/16"-10000psi)
180mm-70MPa
(7 1/16"-10000psi)
KQ70/78 (WHT1003)
70
78
-29~121
Oil, Gas
PF70-78
PF70-78
PF70-78
180mm-70MPa
(7 1/16"-10000psi)
280mm-70MPa
(11"-10000psi)
Model (Order code)
Working pressure ( MPa)
Bore (mm)
Working temperature (℃)
Working medium
Main valve
Wing valve
By-pass valve
Tubing head spool top
flange
Tubing head spool bottom
flange
KQ 21/65 (WHT1101)
21
65
-29~380
Oil, Gas, Vapor
KR21-65
KR21-65
KR21-65
160mm-21MPa
(6"-3000psi)
160mm-21MPa
(6"-3000psi)
KQ21/78(WHT1102)
21
78
-29~380
Oil, Gas, Vapor
KR21-78
KR21-78
KR21-78
180mm-21MPa
(7 1/16"-3000psi)
280mm-21MPa
(11"-3000psi)
KQ35/78(WHT1103)
21
78
-29~380
Oil, Gas, Vapor
KR35-78
KR35-78
KR35-78
180mm-35MPa
(7 1/16"-5000psi)
280mm-35MPa
(11"-5000psi)
SK KR Vapor production wellhead equipment (WHT11)
SK ESP X-mas tree with cable penetration device
SK KQ Production wellhead equipment
SK KR Vapor production wellhead equipment
109
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
SK SL- Y Tubing head spool uses single Y style seal ring, to fulfill
secondary seal that is injected plastic sealing lipid at any time, so
that well sealing performance is more reliable.
SK S - YY Tubing head spool has two Y style seal rings and a set of
pressure test hole that is injected plastic sealing lipid at any time, so
that well sealing performance is more reliable.
SK S & S-Y Casing hang equipment (WHT16) is manufactured in accordance
with API standard that is composed of casing head, casing hanger and by-
pass valve, and so on.
SK Casing head (WHT17) has three types that include slip type, weld type
and thread type. Their rated working pressure is 2000, 3000, 5000, 10000 psi.
Feature:
- The EP tubing hanger is mandrel type hanger with an extended
neck that is installed two T sealing ring that have reliable property.
- The DP tubing hanger has the passage of downhole control line
that is used to connect the downhole control line to surface control
desk.
SK SSLRT Double tubing type tubing hanger (WHT15)
has 8", 10", 12", etc that can hang 2 3/8", 2 7/8",3 1/2" and 4" tubing,
that is used for double tubing completion.
SK SL- Y Tubing head spool (WHT12)
Bottom flange
psi
11"-5000
11"-5000
13 5/8"-5000
13 5/8"-5000
Top flange
psi
9"-5000
9"-10000
11"-5000
11"-10000
Bore
in
7 1/8
7 1/8
10
10
Max casing size
in
7 5/8
7 5/8
10 3/4
10 3/4
Bowl size
in
8
8
10
10
SK S -YY Tubing head spool (WHT13)
SK DP Type & EP Type Tubing hanger (WHT14)
SK SB Casing hanger (WHT18)
Bottom flange
psi
7 1/16"-15000
9"-10000
Top flange
psi
7 1/16"-15000
7 1/16"-15000
Bore
in
5 1/16
5 1/16
Max casing size
in
5 1/2
5 1/2
Bowl size
in
7
7
API Casing head
flange size
in
11
11
11
11
13 5/8
13 5/8
13 5/8
13 5/8
13 5/8
16 3/4
21 1/4
16 3/4
21 1/4
Casing size
in
5 1/2
6 5/8
7
7 5/8
7
7 5/8
8 5/8
8 3/4
9 5/8
9 5/8
13 3/8
Nominal BOP
bore
in
11
11
11
11
13 5/8
13 5/8
13 5/8
13 5/8
13 5/8
16 3/4
21 1/4
Hanger OD
in
10 29/32
10 29/32
10 29/32
10 29/32
13 15/32
13 15/32
13 15/32
13 15/32
13 15/32
16 19/32
20 19/32
SK SL - Y Tubing head spool SK S & S-Y Casing hang equipmert
SB3
Slip type Weld type Thread type
SB6
SK S - YY Tubing head spool
EP Tubing hanger DP Tubing hanger
SSLRT Double tubing type tubing hanger
1211
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
SK S-Y Intermediate casing head (WHT19)
SK SL-Y Intermediate all purpose well head (WHT20)
SK Type Y Pack-off flange (WHT21)
Bottomflange psi
Top flange psi
Bore
in
Max casing sizein
Bowl size
in
11"-200011"-300011"-300011"-5000
11"-200011"-300011"-500011"-5000
7 1/87 1/87 1/87 1/8
7 5/87 5/87 5/87 5/8
10101010
13 5/8"-200013 5/8"-2000
13 5/8-3000
13 5/8"-3000
13 5/8"-3000
13 5/8"-300013 5/8"-300013 5/8"-3000
16 3/4"-2000
21 3/4"-2000
16 3/4"-300016 3/4"-300016 3/4"-3000
11"-200011"-300011"-300011"-5000
1010101010
10 3/410 3/410 3/410 3/410 3/4
1212121212
11"-300011"-300011"-5000
101010
10 3/410 3/410 3/413 3/8
10101012
13 3/8 12
SK SL-Y Intermediate all purpose well head
Feature:
- Working pressure: 10000psi.
- The bowl not only can hang SB casing hanger but also can hang tubing
hanger at the same time.
Bottom
flange(psi)
11"-5000
11"-5000
13 5/8-5000
13 5/8-5000
Bottom flange
psi
11"-3000
11"-3000
11"-5000
11"-3000
11"-5000
11"-5000
13 5/8"-3000
13 5/8"-3000
13 5/8"-3000
13 5/8"-5000
Top flange
psi
7 1/16"-3000
7 1/16"-5000
7 1/16"-5000
11"-5000
11"-5000
11"-10000
11"-3000
11"-5000
13 5/8"-5000
11"-10000
Max casing
size (in)
7"
7"
7"
7 5/8"
7 5/8"
7 5/8"
10 3/4"
10 3/4"
10 3/4"
10 3/4"
Top
flange(psi)
9"-5000
9"-10000
11"-5000
11"-10000
Bore
in
7 1/8
7 1/8
10
10
Max casing
size (in)
7 5/8
7 5/8
10 3/4
10 3/4
Bowl
size (in)
8
8
10
10
SK Type YY Pack-off flange (WHT22)
Bottom flange
psi
9"-10000
11"-10000
11"-10000
11"-15000
13 5/8"-10000
Top flange
psi
7 1/16"-15000
7 1/16"-15000
9"-15000
9"-15000
11"-15000
Max casing
Size (in)
5 1/2"
7 "
7 5/8"
7 5/8"
10 3/4"
SK S-Y Intermediate casing head
SK SL-Y Intermediate all pupose well head
SK Type Y Pack-off flange
SK Type YY Pack-off flange
1413
12 5/8
12 5/8
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
SK 6B & 6BX Flange (WHT23)
Flange Ring gasket Bolt stud
API Pressurerange
Nom.s size
Nom.ize
mm in
ODA
mm
T
mm
P or G
mm
E
mm
APINo.
Boltcircle
Dmm
No.
Size
in
Length
mm
Casingthread
OD
mm
3000lb.WOG(R or RXGasket)
52.4
65.1
179.4
228.6
425.5
539.8
2
2 1/2
6
8
16
20
216
244
381
470
705
857
46
49.2
63.5
71.4
100.0
120.7
95.25
107.95
211.14
269.88
469.90
584.20
11.91
11.91
11.91
11.91
16.67
19.84
24
27
45
49
66
74
165.1
190.5
317.5
393.7
616.0
749.3
8
8
12
12
20
20
1
1
1 5/8
1 7/8
1 1/8
1 1/81 3/8
1 1/2
1 1/2
2 1/42 1/2
3/43/4
1/4
3/8
1 1/8
2
22
2
2
1
7/8
7/8
7/81
5/81
152
165
203
229
298
368
219.1
273.1
406.4
508.0
5000lb.WOG(R or RXGasket)
52.4103.2279.4
24
10
216311584
46.061.9
119.1
95.25161.93323.85
11.9111.9116.67
243954
165.1241.3482.6
8812
1 152203349
177.8273.1
API -BX5000lb.WOG(BX Gasket)
346.1425.5476.3539.8
12161820
673772905991
112.7130.2165.9181.0
408.00478.33563.50632.56
19.9617.9125.5527.20
BX-160BX-162BX-163BX-165
590.5676.3803.3885.8
16162024
318368445476
339.7406.4473.1508.0
API -BX10000lb.WOG(BX Gasket)
46.052.4
130.2228.6476.3539.8
1 1/2258
1820
187200357552
10401143
42.144.179.4
123.8223.0241.3
77.7786.23
176.66299.06577.90647.88
11.8412.6516.9226.3932.7734.87
BX-151BX-152BX-169BX-157BX-164BX-164
146.1158.8300.0476.3925.5
1022.4
8812162424
127133222330572622
219.1473.1508.0
API -BX15000lb.WOG(BX Gasket)
65.1179.4279.4
2 1/26
10
254505813
57.2119.1187.3
102.77241.83357.23
14.0723.3929.18
BX-153BX-156BX-158
200.0428.6711.2
81620
171324489
177.8244.5
API -BX20000lb.WOG(BX Gasket)
52.477.8
179.4
236
287357656
71.485.7
165.1
86.23119.00241.83
12.6515.3923.39
BX-152BX-154BX-156
230.2287.3554.0
8816
210254445 177.8
SY Well Head Equipments and X-mas trees
SY Well head
Item
1
2
3
4
5
6
7
Component
Pressure Gauge
Needle Valve
Bull Plug
Casing Head
Gate Valve
Casing Spool
Gate Valve
Quantity
4
4
1
1
1
1
11
Item
1
2
3
4
5
6
Component
Lock Screw
Packing Nut
Packing Washer
Packing
Slip Type Hanger
Casing Head Body
Quantity
12
12
24
60
1
1
Item
1
2
3
4
5
Component
Slip Type Hanger
Lock Screw
BT Seal Ring
Casing Spool
Grease Fitting
Quantity
1
12
1
1
4
SY Casing head
The upper side of the casing head is API 6 B flange or API 6 BX flange.
Type 6B Flange Type Ring gasket
Type RX Ring gasket
Type BX Ring gasket Type 6BX Flange
X-mas tree
SY Wellhead
Casing head
Casing spool
Tubing spool
Casing spool
Casing Head
1615
A
PD
T
E E
E
A
DG
T
25
25
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
Item
1
2
3
4
5
6
Component
Socket Head Screw
Upper Lock Ring
Seal Ring
Lower Lock Ring
Position Circle
Slip Body
Quantity
16
1
1
1
1
1
Item
1
2
3
4
5
6
7
Component
Packing
Packing Washer
Lock Screw
Packing Nut
7"Casing Hanger
9 5/8"Casing Hanger
Casing Head Body
Quantity
25
10
5
5
1
1
1
Item
1
2
3
4
5
6
7
8
9
10
11
Component
Lock Sleeve
Bolt
Fitting
Inside Sliding Bush
Inside Seal Ring
O-Ring
Outside Seal Ring
Outside Sliding Bush
Retaining Ring
O-Ring
Hanger Housing
Quantity
1
4
4
1
1
1
1
1
1
2
1
Item
1
2
3
4
5
6
7
8
9
10
11
12
Component
Pressure Gauge
Needle Valve
Bull Plug
Instrument Flange
Gate Valve
Tubing Spool
Tubing Head Adapter
Gate Valve
Cross
Choke Valve
Tree Cap
Needle Valve
Quantity
2
1
1
2
6
1
1
3
1
2
1
1
Item
1
2
3
4
5
6
7
8
Component
Grease Fitting
BT Seal Ring
Tubing Spool
Tubing Hanger
Lock Screw
Packing Nut
Packing
Packing Washer
Quantity
6
2
1
1
12
12
60
24
SY TFZ35-70A Series Casing head (WHT24)Features:Its installation process is simplified, so that is safer and more reliable.
Technical parameters:- Casing program: 20"X13 3/8"X9 5/8"X7"(or 5 1/2")
- Connection type:
Top: 13 3/8"-5000psi (10000psi) flange, BX160(BX159) with flange gasket ring.
Lower: 13 3/8"CSG casing thread.
- Flange of side outlet: 35/65 R27(70/65 BX153)
- Supporting load: 5000KN
- Interchangeable hanger: 4", 4 1/2", 5 1/2", 7", 9 5/8"
- Operating pressure: 35Mpa, 70Mpa
- Applicable well depth: 5000~7000m
- Operating temperature: P U grade.
- Operating medium: oil, gas, mud
- Minimum vertical bore: 316mm
SY X-mas tree
Slip type hanger
SY TFZ35-70A Series Casing head
Casing Hanger
SY X-mas Tree & Tubing Spool
SY Tubing head spool
1817
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
Item
1
2
3
4
5
6
Component
Tubing Hanger Body
Nut
Gasket
Seal Ring
O-Ring
O-Ring
Quantity
6
2
1
1
12
12
SY Producing oil (or gas ) well head (WHT25)
SY X-mas tree (for oil or gas) and tubing heads (WHT26)
SY Valve
Parameter
Pressure rating
Nominal side outlet size
Operating temperature
Applicable medium
Connection type
Materiel class
PSL
PR
KY65/25 (WHT2501)
3500psi (24.5Mpa)
2 9/16"(65mm)
P U (-29℃- 121℃)
Oil, gas, water
Collar clamp
AA - DD
PSL 1-2
PR 1-2
KQ65/60 (WHT2502)
8500psi (59.5Mpa)
2 9/16"(65mm)
P U (-29℃- 121℃)
Oil, gas, water
flange
AA - FF
PSL 1-3
PR 1-2
Model (Order code)
Model(Order code)
KQ65/21(WHT2601)
KQ65/35(WHT2602)
KQ65/70(WHT2604)
KQ65/105(WHT2606)
Pressure rating 3000psi 5000psi 5000psi 10000psi 10000psi 15000psi 15000psiMain 2 9/16″ 2 9/16″ 3 1/8″ 2 9/16″ 3 1/16″ 2 9/16″ 3 1/16″Nominal
size Side 2 9/16″ 2 9/16″ 2 9/16″ 2 9/16″ 2 9/16″ 2 9/16″ 2 9/16″Operating
temperatureP U P U P U P U P U P U P U
Applicable tomedium
Oil, gas,water
Oil, gas,water
Oil, gas,water
Oil, gas,water
Oil, gas,water
Oil, gaswater
Oil, gas,water
PSL PSL1-3 PSL1-3 PSL1-3 PSL1-3 PSL1-3 PSL1-3 PSL1-3Materiel class AA-FF AA-FF AA-FF AA-FF AA-FF AA-FF AA-FF
PR PR1-2 PR1-2 PR1-2 PR1-2 PR1-2 PR1-2 PR1-2
Connection typeCollar
clamp orflange
Collar clamp or
flange
Collar clamp or
flangeFlange Flange Flange Flange
SY Gate Valve
Feature: The product uses integral ram, so that increases service life.
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Component
Body
Bonnet Seal Ring
Gate
Gate T-Nut
Bonnet
Packing
Packing Ring
Packing Gland
Bonnet Stud
Bonnet Nut
Bearing
Stem
Split Bushing
Bearing Cap
O-Ring
Handwheel
Washer
Screw
Grease Cup
Grease Fitting
O-Ring
Seat
Wave Spring
Quantity
1
1
1
1
1
2
3
1
8
8
2
1
1
1
1
1
1
1
1
1
4
2
2
SY Tubing hanger
Non-rising stem slabgate valve
KQ80-65/35(WHT2603)
KQ78-65/70(WHT2605)
KQ78-65/105(WHT2607)
2019
DQG KYJ(F) 16-24.5/65 Pumping unit well wellhead (WHT27)
Future:
- Its structure is simple.
- Operating pressure of tubing head: 24.5 MPa.
- Operating pressure of rubber valve: 16 MPa.
- Drift diameter of valve: 65mm
- Collar clamp connection.
DQG KYJ(F) 16-24.5/65Pumping unit well wellhead
SY Non-rising stem slab gate valve (VAL01)Specifications :- Operating temperature:350。F or 650。F- Operating pressure : 2000, 3000, 5000, 10000, 15000psi- Materiel class: API 6A AA - FF- Specification level: PSL 1-3- Property rank: PR1
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Component
Body
Bonnet seal ring
Gate
Seat
O-Ring
Wave spring
Bonnet Stud
Stem
Grease fitting
Bonnet
Bonnet nut
Stem Lip Packing
Packing ring
Packing gland
Bearing
Stem Screw
O-Ring
Grease Cup
Screw Housing
Handwheel
Stem Protector
Quantity
1
1
1
2
4
2
8
1
1
1
8
2
1
1
2
1
1
1
1
1
1
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Component
Body
Gate
Seat
Wave Spring
O-Ring
Bonnet Stud
Stem
Bonnet
Packing Gland
Screw
Lower Gland
O-Ring
O-Ring
Cylinder
Piston
Lock Nut
Upper Gland
Indicator Rod
Stem Protector
O-Ring
O-Ring
O-Ring
O-Ring
Plug
Bonnet Nut
Packing Ring
Stem Lip Packing
Grease Fitting
Quantity
1
1
2
2
4
8
1
1
1
20
1
2
2
1
1
1
1
1
1
2
2
2
2
2
8
2
5
1
SY Rising stem slab gate valve (VAL02)
- Operating temperature: 350。F or 650。F
- Operating pressure : 2000, 3000, 5000, 10000, 15000psi
- Materiel class: API 6A AA - FF
- Specification level: PSL 1-3
- Property rank: PR1
Rising stem slab gate valve
Hydraulic plate valve
2221
SY Hydraulic plate valve (VAL03)The opening and closing mechanism of hydraulic plate valve takes hydraulic control manner, so that it is very convenient for using to automatic control system and remote control.Technical parameters:Pressure rating: 2000~15000psiNominal size: 1 13/16" ~ 4 1/16"
Operating temperature: P UProperty rank: PR1-2Specification level: PSL 1-3Materiel class: API 6A AA - FFOperating pressure : 107~1500psi
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
SY Hydraulic drive safety valve (VAL04)Hydraulic drive safety valve mainly includes preparing valve of
the safety valve and hydraulic driver that is an actuator of
surface safety system.
Ordering method of gate valveOrdering code (Example: KQ78-65/70)
SY Gate valve (VAL05) (unit: mm)
Hydraulic drive safety valve is installed on second main gate
valve, so that bring about self-closing well on wellhead.
Schematic drawing of hydraulic driver is installed on counter
motion gate valve
XXXX XX XXModel number Nominal bore
diameterOperating pressure
code code codeFlange rising stem wafer valve PFF 1-13/16" 46 3000psi 21
Stirrup rising stem wafer valve PFK 2-1/16" 52 5000psi 35Screw thread rising stem wafer valve PFL 2-9/16" 65 10000psi 70Flange non-rising stem wafer valve PFFA 3-1/16" 78 15000psi 105
Stirrup non-rising stem wafer valve PFKA 3-1/8" 80
Screw thread non-rising stem wafer valve PFLA 4-1/16" 103
Nominal size
L d RTJ C D T N M
3000psi
2-1/16" 371 52.4 R24 165.1 216 46.0 8 25
2-9/16" 422 65.1 R27 190.5 244 49.2 8 30
3-1/8" 435 79.4 R31 190.5 241 46.0 8 25
4-1/16" 511 103.2 R37 235.0 241 46.0 8 25
5000psi
2-1/16" 371 52.4 R24 165.1 216 46.0 8 25
2-9/16" 422 65.1 R27 190.5 244 49.2 8 30
3-1/8" 478 79.4 R35 203. 2 267 55.6 8 33
4-1/16" 549 103.2 R39 241. 3 311 61.9 8 36
10000psi
1-13/16" 464 46.0 BX-151 146.1 187 42.1 8 23
2-1/16" 521 52.4 BX-152 158.8 200 44.1 8 23
2-9/16" 565 65.1 BX-153 184.2 232 51.2 8 25
3-1/16" 619 79.4 BX-154 215.9 270 58.3 8 30
4-1/16" 670 103.2 BX-155 258.8 316 70.2 8 33
15000psi
1-13/16" 457 46.0 BX-151 160.3 208 45.2 8 25
2-1/16" 483 52.4 BX-152 174.6 222 50.8 8 25
2-9/16" 635 65.1 BX-153 200.0 254 57.2 8 30
3-1/16" 598 79.4 BX-154 230.2 287 64.3 8 33
4-1/16" 737 103.2 BX-155 290.5 360 78.6 8 36
Hydraulic driverHydraulic
driver
Open close Hydraulic drive safety valve
Gate valve
2423
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
Item12345678
ComponentBody Valve coreSpringBushingO-RingBonnetStudNut
Quantity11112188
Item123456789
101112131415161718192021222324252627
ComponentBushing
BodyBonnet Stud
O-RingSeat Bushing
SeatStem Adaptor
Valve coreO-Ring
Packing BoxO-RingBonnet
Packing GlandBonnet Nut
StemScrew Housing
Saddle KeyStem Nut
HandwheelIndicator RingStem ProtectorBearing Gland
BearingFlat Key
Grease CupPacking Ring
Packing
Quantity118211112121181111111121125
SY Check valve (VAL06)
SY Choke Valve
Check valves are designed and manufactured in accordance with API Spec 6A. The valve body is alloy forged part, so that it can bear high pressure.
SY Choke valve includes adjustable choke valve and
fixed choke valve. Its operating pressure can reach to
10000psi. It mainly used to well production control,
but is not used for shutting valve and shutting off flow
rate.
SY Check valve
SY Manual choke valve(val07)
2625
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
Item123456789
1011121314151617181920212223242526272829
ComponentBody
BushingSeat Bushing
O-RingSeat
Stop NutValve Core
Lower Diversion BushingUpper Diversion Bushing
StemO-RingO-RingBonnetCylinder
Cylinder AdapterO-RingO-RingO-RingPiston
Cylinder CoverCirclipScrew
WasherO-Ring
Bonnet NutPacking GlandBonnet StudPacking Ring
Stem Lip Packing
Quantity11111111111211222211141281825
SY Hydraulic choke valve (VAL08)SY Hydraulic choke valve is a flow control valve. It can change runner section, in order to control flow rate.Technical parameters:Pressure rating: 2000~15000psiOperating temperature: P UOperating medium: oil, gas and water
SY Positive choke valve (VAL09)
Positive choke valve is used as flow control of wellhead and X-mas tree.
Technical parameters:
Pressure rating: 2000~15000psi
Operating temperature: P U
Operating medium: oil, gas and water
Choke bore diameter: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12mm
Item123456789
ComponentBody
O-RingValve Core
Retaining RingChoke Bean
O-RingBonnet
Lock NutGrease Fitting
Quantity121111111
Hydraulic choke valve
Positive choke valve
2827
[email protected]://www.rigsolution.com
[email protected]://www.rigsolution.com
SY Orifice Choke Valve is used as pipe manifold
equipment about drilling, fracturing, mud circulating
and surface high pressure gas injection (or gas
production).
Ordering code of choke valve(Example: JLK65/70):
XXXX XX XXModel code Nominal
borediameter
code Operating pressure rating
code
Adjustable choke valve
JLK 1-13/16" 46 3000 21
Fixedchokevalve
JLG 2-1/16" 52 5000 35
Hydraulic operatedchoke valve
JLKY 2-9/16" 65 10000 70
3-1/16" 78 15000 1053-1/8" 804-1/16" 103
Technical parameters of fixed choke valve
Technical parameters of adjustable choke valve
Specification
2-1/16"
2-1/16"
2-1/16"
2-1/16"
2-9/16"
Operating
pressure
2000psi
3000psi
5000psi
10000psi
10000psi
H
148
198
186
230
296
L
148
186
186
230
282
Maximum
tapping size
1-1/2"
1-1/2"
1-1/2"
1-1/2"
1-1/2"
Specification
2-1/16"
2-1/16"
2-1/16"
2-9/16"
2-9/16"
3-1/8"
3-1/8"
Operating
pressure
3000psi
5000psi
10000psi
5000psi
10000psi
3000psi
5000psi
H
238
238
320
330
320
200
200
L
186
186
230
212
230
195
195
Maximum
tapping size
2"
2"
2"
2"
2"
2"
2"
Pressure rating 2000~15000psi Nominal bore diameter 2-1/16"~4-1/16"
Specification grade PSL 1~3 Material grade AA~FF
Property grate PR 1~2 Temperature grade P U
Item123456789
1011121314151617181920
ComponentBody
Lower Seat BushingUpper Seat Bushing
Upper SeatStem
SpringO-RingBonnet
Screw HousingWasherScrew
HandwheelPointerBearing
Split BushingPacking Gland
Bonnet NutPacking
Bonnet StudLower Seat
Quantity11111
102111111211
123
121
SY Manual orifice choke valve(VAL10)
SY Hydraulic orifice choke valve(VAL11)
choke valve
3029