WELL EQUIPPED 760 HP IDECO SBS H-44 DRILLING RIG FOR SALE · 2021. 5. 6. · 760 HP IDECO SBS H-44...

of 11

WELL EQUIPPED

760 HP IDECO SBS H-44 DRILLING RIG

FOR SALE

of 11

GENERAL SPECIFICATIONS

RIG TYPE: SBS IDECO H-44 CD Single Drum, 6-Axle drive-in

WORKING DEPTH:

• 8530' / 2600m with 5" Drill Pipe

DRAW WORKS:

• IDECO SBS: H-44 CD, Single Drum

• Drum Dimensions: Diameter 18" / 0.46m. Length 35.5"/0.9 m.

• Auxiliary Brake: Parkersburg V-80

• Nominal Input Power: 600 - 950 HP

• Drilling Line Diameter: 1-1/8"

RIG EQUIPMENT

MAST:

• Type: KM 111-268 AGH

• Free Height: 111ft

• Max. Hook Load: 268,000 lbs

• Serial Number: 460 (installed in February 1981)

• Hydraulic Catworks: Make-up / Brake-down (Certified by Derrick Services Limited, August 2009)

• Racking Capacity: 8530'/2,600 mtr, 5" DP W/10 stds 6-1/2" DCs

• Drill Depth / Capacity: 8530'/2600 mtr, 5" DP

• Wind Load Capacity: 100 Km/hr

• API Spec: 4F Quick Life telescoping mast type

• Integral Ladder c/w safety climbing devices to Monkey Board and Crown

• Mast Raising Cylinder assembly

• One (1) set of stairs from Drilling module to ground level

• One (1) set of stairs from Drillers Platform to Drilling Module c/w handrails

• New Bridal Line Installed August 20, 2010

• New Drill Line including 350m spare on spool installed August 20, 2010

* Derrick inspected and passed by Derrick Services Limited, Great Yarmouth, August 2009. * Re-inspected and passed by Practical Engineering, Brisbane, September 2012.

of 11

SUBSTRUCTURE:

• Work Floor Height: 4.17m

• Rotary Load: 130 mt.

• Set Back Load: Set back capacity total 95 tons with simultaneously 130 tons rotary load

* Inspected and passed by Derrick Services Limited, August 2009. * Re-inspected and passed by Practical Engineering, Brisbane, September 2012.

RIG RAMP:

• Quantity: One (1) Unit

• Rig Ramp: 800mm

• Unit is made of heavy duty aluminum construction for lightweight transport and handling.

ROTARY TABLE:


• Manufacturer: IDECO SBS

• Serial Number: 213

• Model: LR 20-1/2"

• Opening: 20-1/2" and 17-1/2"

• Solid Master Bushing: MSPC

• Static Capacity: 408 tons (maximum)

DRAW WORKS:


• Manufacturer: IDECO SBS

• Model: H-44 CD, Single Drum

• Drum Dimensions: Diameter 18" / 0.46m: Length 351 / 2" / 0.9m

• Auxiliary Brake: Parkersburg V-80

• Nominal Input Power: 600 - 950 HP

• Drilling Line Diameter: 1-1/8"

HOOK - BLOCK:


• Manufacturer: IDECO -SBS

• Model: UTB 160-4-30

• Load Capacity: 160 Tons

• Sheaves: 4 x 1-1/8"

* Recertified by Kestrel Engineering, Aberdeen, October 2009

* Recertified by Practical Engineering, September 2012

of 11

CROWN BLOCK:


• Manufacturer: IDECO

• Sheaves: 5 Sheaves x 1-1/8" Drill Line

• Sheaves Diameters: 1 Unit 36", 4 Units 30" for 1-1/8" cable diameter

* Fast line Sheave and bearing assembly replaced with new in line with Derrick Services Limited recommendations October 2009. * Inspected by Practical Engineering, Brisbane, Sept 2012.

RIG/CARRIER POWER:

• Quantity: Two (2) Units

• Manufacturer: Caterpillar

• Model: 2 x D 343 TA-A

• Output: 380 x 380 HP Dual

• Transmission: Allison CLBT 586

• Gear Type: Compound angular gear, 5 forward and 1 reverse gear

• Power Distributor: Switchable for travel through Universal shafts to the rear axle or to the

Drawworks and Turntable

• Safety Device: Safety shutdown, mufflers & air intake emergency shutdown valve

GENERATOR SET:

• Quantity: 2 Units

• Type: 333 kVA Hitzinger three-phase synchronous generators

• Model: SGS 6C 40T

• Powered By: D 3406 Caterpillar diesel engine

• Switching Cabinet: Included

• All contained within a 40' / 12m sound-proof container

*All electrical work reinstalled to Australian Standards Sept 2012

CAT WALK & PIPE RACKS

• Cat Walk: Length: 45', Width: 5'5", Working Height: 3'

• Pipe Racks: Pipe Racks built specifically for the cat walk

INSTRUMENTATION:

• Weight Indicator: Martin Decker FS

• Torque Indicator: Martin Decker, Analog - Hydro Mechanical

of 11

MUD PUMP:


• Manufacturer: EMSCO

• Model: F-800

• Engine: Caterpillar DT399

SHALE SHAKERS:

Quantity: Two (2) Units

Manufacturer: DERRICK FLC

Model: DUAL 530

MUD SYSTEM:

• Size: 810bbl

• Skid mounted: Yes

• Number of tanks: 3 + trip

of 11

CASING & ACCESSORIES; TUBING

ITEM QTY DESCRIPTION

1 10 13 3/8" x 54.5 ppf BTC - K 55

2 2 Pup Joints 13 3/8" x 54.5 ppf BTC - K 55

3 5 Threaded box 13 3/8" BTC

4 18 10 3/4" x 40.5 ppf BTC - K 55

5 4 Pup Joints 10 3/4" x 40.5 ppf BTC - K 55


7 124 7 5/8" x 26.4 ppf BTC - L 80

8 4 Pup Joints 7 5/8" x 26.4 ppf BTC - L 80


10 194 5 1/2" x 17 ppf BTC - L 80

11 6 Pup Joints 5 1/2" x 17 ppf BTC - L 80


13 3 10 3/4 " Float shoe & float collar (set)

14 15 10 3/4" Centralizers

15 15 10 3/4" Stop collar

16 4 7 5/8" Float shoe & float collar (set)



19 4 5 1/2" Float shoe & float collar (set)



22 3 10 3/4" Top & Bottom cementing plugs (set)



25 1 10 3/4" Casing drift



28 136 2 7/8" Tubing 6.7 ppf EUE J 55

29 4 Pup joints 2 7/8" 6.7 ppf EUE J 55

30 3 Threaded box 2 7/8" EUE

SHAKER SCREENS


1 6 API 100

2 8 API 140

3 16 API 170

4 20 API 200

5 6 API 270

of 11

HANDLING TOOLS


1 1 VARCO 6" SLX 150T BJ ELEVATOR (CASING)

2 1 VARCO 7 5/8" SLX 150T BJ ELEVATOR (CASING)

3 1 VARCO 10 3/4" SLX 150T BJ ELEVATOR (CASING)

4 1 SINGLE JOINT ELEVATOR 5-5 3/4"

5 1 SINGLE JOINT ELEVATOR 7-7 3/4"

6 1 SINGLE JOINT ELEVATOR 9 7/8-10 3/4"

7 1 DC SAFETY CLAMP AOT 12-116

8 1 DC SLIPS

9 1 DCS-L-SLIPS 8-9 1/2"

10 2 CMS-XL-SLIPS

11 1 LDC CON 77 SLIPS

DRILLING BITS (REED)


1 1 17 1/2" T 11

2 1 12 1/4" TC 11 CP

3 1 12 1/4" R 12 AP

4 1 9 7/8" TD 43 AP

5 1 9 7/8" TC 11 CP

6 1 PDC 6 3/4" DSH 416 S

7 1 6 3/4" R 30 AP

8 3 6 3/4" R 22 AP

9 1 Bit breaker 6 1/2" - 6 3/4" - REED

10 1 Bit breaker 17.5" - REED

11 1 Bit breaker 12 1/4" - REED

12 1 Bit Breaker 9 7/8" - REED

13 1 NO-GO Gauge 12 1/4"

14 2 NO-GO Gauge 9 7/8"

15 1 NO-GO Gauge 6 3/4"

of 11

FLOAT VALVES & TOTCO RINGS


1 4 5F6R - Float valve

2 2 Repair kit for 6R

3 2 4R - Float valve


5 2 2F - 3R Float Valve


7 1 Totco Ring 6R - Tube down

8 4 Totco Ring 6R

9 2 Totco Ring 4R

10 2 Totco Ring 3R

11 2 Totco Ring 2R

MISCELLANEOUS


1 1 Maintenance & repair kit for drilling tongs

2 36 Diamond tong Dies - for tongs

3 50 Varco Circular buttons

4 50 Varco Circular buttons for DC slips

5 24 Varco Pyramid Tooth Tong Die

6 1 Set of drilling tongs with jaws

7 1 Repair kit for 4" Gate Valve

8 2 4" DMS SEAT

9 1 3" DMS SEAT

10 1 Repair kit for HCR - 4"x5K

11 2 Repair kit for 2 1/16" manual gate valve

12 1 Repair kit for 3 1/8" x 5k manual gate valve

13 3 Repair kit 4.0 Cylinder

14 25 Finger Stabilizer 3 1/2"

15 4 4" Hose socks

16 1 Pipe wrench 24"



19 1 Small chain tong

20 1 300mm Shifter

21 1 60" Stilson

22 1 Small crowbar

23 2 Large crowbar

of 11

PRESSURE CONTROL


1 2 Ring gasket RX 24


3 6 Ring gasket R 54


5 5 2" T-part WECO 1502

6 1 2" 1502 WECO BOX - BOX (short)

7 1 2" T-part WECO 1502 - one end 2" NPT

8 1 2" Chicksan WECO 1502

9 20 4" 1502 WECO Gasket

10 32 2" 1502 WECO Gasket


MUD PUMP EQUIPMENT


1 3 6 1/2" Liner

2 6 6" Liner

3 3 5 1/2" Liner

4 1 Liner cage

5 3 Piston rod

6 1 6 1/2" Piston assembly

7 12 6" Piston assembly

8 3 5 1/2" Piston assembly

9 6 5 1/2" Piston rubber kits

10 0 Seats

11 0 Valve insert

12 18 Liner seal

13 12 Valve cap seal

14 7 Valve springs

15 13 Booster springs

16 1 Hydraulic valve seat puller kit

17 1 Pulsation Dampener Gasket

18 1 0-6000 psi Pressure Gauge

19 3 J Stein Gasket + Seats (set)

20 6 Valve + Seat + Valve inserts (complete)

of 11

BOP STACK & WELL COMPLETION


1 1 MUD CROSS 11" - 11" 5M C/W 2 SIDE OUTLETS

2 1 DSA 11" - 11" X 5M

3 3 CASING HEAD 11" X 5M - 10 3/4" C/W STUDS & NUTS

4 1 CASING SPOOL 11" - 11" X 5M - 5 1/2" C/W STUDS & NUTS

5 1 BACK PRESSURE VALVE

6 1 TWO WAY CHECK VALVE

7 1 RUNNING TOOL

8 1 T-ROD

9 1 HCR 3 1/8" X 5M

10 1 CHOKE MANIFOLD 2 1/16" X 10M + CHOKE PANEL

11 1 2" COFLEX HOSE FOR CHOKE MANIFOLD

12 1 11" WEAR BUSHING (10" ID) + TEST PLUG

13 1 7 1/16" WEAR BUSHING (6" ID) + TEST PLUG

14 4 1" X 10m BOP HOSE

15 2 1" X 6m BOP HOSE

16 1 Energise pump - seal assembly (kit)

17 1 4" COFLEX HOSE

CROSS OVERS, KELLY COCK, IBOP


1 1 3 1/2 REG (B) X 3 1/2 IF (B)

2 2 4 1/2 IF (B) X 3 1/2 IF (P)

3 1 3 1/2 IF (B) X 3 1/2 IF (P)

4 1 4 1/2 IF (B) X 4 1/2 IF (P)

5 1 3 1/2 IF (B) X 3 1/2 IF (P) X 2" 1502

6 1 3 1/2 IF (B) X 3 1/2 REG (B)

7 1 6 5/8 REG (P) X 6 5/8 REG (B)

8 1 SAVER SUB 6 5/8 REG (P) X 4" IF (P)

9 1 6 5/8 REG (P) X 6 5/8 REG (B)

10 1 6 5/8 REG (P) LH X 6 5/8 REG (B) LH

11 1 IBOP 3 1/2" IF

12 1 10 3/4" BTC (P) X 2" 1502

13 1 7 5/8" BTC (P) X 2" 1502

14 1 5 1/2" BTC (P) X 2" 1502

15 1 2 7/8" EUE X 2" 1502

16 1 LIFTING CAP 2 7/8" EUE

17 2 4 1/2" IF PUP JOINT

of 11

OTHER TOOLS


1 1 POWER TONG

2 1 MUD SAVER (KELLY KAN + SPARE INSERT KIT)

3 1 KELLY SPINNER C/W LIFTING CAP

4 2 5T CHAIN HOIST

5 1 PIPE SPINNER

6 1 ELEVATOR LINKS

7 1 ELEVATOR LINKS 72" LONG 250 T

8 1 MD TOTCO SURVEY TOOL

9 1 USED 12 1/4 BIT (W/O NOZZLES)

10 5 WIRE ROPE REELS (FOR RIG)

VARIOUS TOOLS AND EQUIPMENT

WELL EQUIPPED 760 HP IDECO SBS H-44 DRILLING RIG FOR SALE · 2021. 5. 6. · 760 HP IDECO SBS H-44...

Documents

Transcript of WELL EQUIPPED 760 HP IDECO SBS H-44 DRILLING RIG FOR SALE · 2021. 5. 6. · 760 HP IDECO SBS H-44...