Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB...

204
63 62 Welding Gloves Welding Gloves Welding Gloves MIG/MAG/MMA All ESAB and Murex gloves are CE approved. The heavy duty welding gauntlets and riggers have been tested and certified by a third party notifying body. The glove is then a Cat. 2 product. Test against mechanical stress such as abrasion, cut, tear and puncture. Test for thermal performance such as exposure to an open flame, contact heat, convective heat, radiant heat, small and large splashes of molten metal. These superior new welding gloves from ESAB offer a whole new approach to fit, form and function. Ergonomicaly designed to fit the natural curve of the hand, offering increased quality & comfort to the wearer. The MIG glove is made from heavy & fine cut leather, and is lined from hand to cuff. With the curved design the glove fits the hand perfectly, and also has a flexible wrist area which reduces friction. With welted seams, kevlar stitching & reinforced thumb, the glove is very strong and offers a very high level of protection to the wearer. ESAB Curved MIG L 0700 005 043 ESAB Curved MIG XL 0700 005 040 ESAB Curved MIG Glove A heavy-duty 1.3mm welding glove made of selected cow-split leather with a lining that is both comfortable and protective. Wing thumb is angled for high comfort and dexterity. Cat. 2. Heavy Duty Basic 0700 005 007 Heavy Duty Basic A welding glove made of hard-wearing, heat-resistant cow-split leather, 1.3mm thick. Reinforced wing thumb fully welted KEVLAR stitched. CE approved. Cat. 2. Heavy Duty Regular 0700 005 008 Heavy Duty Regular A welding glove made of black, strong cow-grain leather. High dexterity with KEVLAR stitching ensures that the glove can resist hard mechanical stress. Fully welted, CE approved. Cat. 2. Heavy Duty Black 0467 222 007 Heavy Duty Black A welding glove made of cow-split and grain leather with a padded back to withstand high reflective heat. The threefold KEVLAR seam ensures that the glove can resist hard mechanical stress. The thumb is reinforced. Cat. 2. Heavy duty EXL L 0700 005 009 Heavy duty EXL XL 0700 005 029 Heavy Duty EXL Welding glove with two layers of cowhide capable of withstanding extreme heat. Suitable for tubular wire welding. The facing of aluminium- coated PFR rayon reflects 95% of the thermal radiation. The glove is padded with COMFOflex and is sewn with fourfold KEVLAR. The thumb is angled for high comfort. Heavy duty ALU 0700 005 010 Heavy Duty Aluminised A welding glove made from hard wearing, heat resistant cow split leather. Superior Weld Gauntlet 0701 415 614 A welding glove made from hard wearing, heat resistant cow split leather. The palm is reinforced to give extra protection and longer life. Superior Gauntlet Reinforced 0701 415 615 Murex Superior Gauntlets

Transcript of Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB...

Page 1: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

6362

Welding Gloves Welding Gloves

Welding Gloves MIG/MAG/MMA

All ESAB and Murex gloves are CE approved. The heavy duty welding gauntlets and riggers have beentested and certified by a third party notifying body. The glove is then a Cat. 2 product.

Test against mechanical stress such as abrasion, cut, tear and puncture.

Test for thermal performance such as exposure to an open flame, contact heat, convective heat,radiant heat, small and large splashes of molten metal.

These superior new welding gloves from ESAB offer a whole newapproach to fit, form and function. Ergonomicaly designed to fit thenatural curve of the hand, offering increased quality & comfort to thewearer. The MIG glove is made from heavy & fine cut leather, and is lined from hand to cuff. With the curved design the glove fits the handperfectly, and also has a flexible wrist area which reduces friction. With welted seams, kevlar stitching & reinforced thumb, the glove is very strong and offers a very high level of protection to the wearer.

ESAB Curved MIG L 0700 005 043ESAB Curved MIG XL 0700 005 040

ESAB Curved MIG Glove

A heavy-duty 1.3mm welding glove made of selected cow-split leatherwith a lining that is both comfortable and protective. Wing thumb isangled for high comfort and dexterity. Cat. 2.

Heavy Duty Basic 0700 005 007

Heavy Duty Basic

A welding glove made of hard-wearing, heat-resistant cow-split leather,1.3mm thick. Reinforced wing thumb fully welted KEVLAR stitched. CE approved. Cat. 2.

Heavy Duty Regular 0700 005 008

Heavy Duty Regular

A welding glove made of black, strong cow-grain leather. High dexteritywith KEVLAR stitching ensures that the glove can resist hard mechanicalstress. Fully welted, CE approved. Cat. 2.

Heavy Duty Black 0467 222 007

Heavy Duty Black

A welding glove made of cow-split and grain leather with a padded back to withstand high reflective heat. The threefold KEVLAR seamensures that the glove can resist hard mechanical stress. The thumb is reinforced. Cat. 2.

Heavy duty EXL L 0700 005 009Heavy duty EXL XL 0700 005 029

Heavy Duty EXL

Welding glove with two layers of cowhide capable of withstandingextreme heat. Suitable for tubular wire welding. The facing of aluminium-coated PFR rayon reflects 95% of the thermal radiation. The glove ispadded with COMFOflex and is sewn with fourfold KEVLAR. The thumbis angled for high comfort.

Heavy duty ALU 0700 005 010

Heavy Duty Aluminised

A welding glove made from hard wearing, heat resistant cow split leather.

Superior Weld Gauntlet 0701 415 614

A welding glove made from hard wearing, heat resistant cow split leather.The palm is reinforced to give extra protection and longer life.

Superior Gauntlet Reinforced 0701 415 615

Murex Superior Gauntlets

Page 2: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

6564

A basic gauntlet made of selected cow-split leather with a lining that is both comfortable and protective. The wing thumb is angled for high comfort.

Red Gauntlet 0701 380 498

Red Gauntlet

Exclusive TIG-welding glove made of goatskin with seams KEVLARstitched seams. The gun cut straight thumb makes it easy to gripdifferent objects. The leather cuff is 13cm long and the absence of anindex finger seam increases the flexibility. The dexterity is extremelygood. Fully welted. Cat. 2.

TIG SuperSoft 0700 005 006

TIG SuperSoft

A quality TIG gauntlet with a reinforced thumb and 13cm long leather cuff.The palm is fully lined for increased comfort and protection. Cat. 2.

TIG Professional 0701 415 963

TIG Professional

A thin pig-split welding glove suitable for TIG applications. It has a 13cmleather cuff and a reinforced thumb for good grip. The absence of anindex finger seam increases flexibility. Fully welted. Cat. 2.

TIG Soft 0700 005 005

TIG Soft

These superior new welding gloves from ESAB offer a whole newapproach to fit, form and function. Ergonomicaly designed to fit thenatural curve of the hand, offering increased quality & comfort to thewearer. The TIG glove is made from thin high quality leather, withimproved fit for higher dexterity. The glove is highly durable, with weltedseams & kevlar stitching. The glove is also extremely light weight, whichincreases the comfort to the wearer.

ESAB Curved TIG Gauntlet L 0700 005 041ESAB Curved TIG Gauntlet XL 0700 005 042

ESAB Curved TIG Glove

A light weight, traditional TIG gauntlet. Cat.1, simple design.

TIG Basic 0700 653 532

TIG Basic

The hand shield should be used together with a welding gauntlet to giveextra protection against the radiated heat.

Hand shield 0700 010 009

Hand Shield

Welding Gloves Welding Gloves

A hard-wearing work glove made of selected cow-grain leather with a cotton lining for comfort. The rubber-reinforced cuff provides extraprotection and the wing thumb is angled. Cat. 2.

Heavy Duty Worker 0700 005 011

ESAB Heavy Duty Worker

A hard wearing work glove made of cow grain leather with a cottonlining for comfort.

Superior rigger 0701 415 613

Superior Rigger

Welding Gloves TIG and General Handling

Page 3: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Blankets

The ESAB Welding blankets are produced using heat and flame resistant fabrics. The blankets provide excellent protection from grinding/welding sparks, slag and drops of molten metal. ESAB offer a wide range of blankets with different characteristics and in many different sizes. The blankets are colour coded.

When selecting the most suitable blanket for the application, the following factors should be considered:

Positioning of the blanket - Sparks hitting a blanket, which is positioned horizontally, will put extra stress on the material and a stronger and more heat resistant blanket should be used.

Work application - For light duty welding or cutting a thinner and less heat resistant blanket can be used.

For heavy duty welding or cutting when the blanket is exposed to drops of molten metal then a more durable blanket should be used. All blanket are to be used on an incline of at least 15 degrees.

Light Duty Application

P.U. coated fibreglass blanket for light sparks and spatter. Provides an excellent vertical screen to protect equipment and personnel from the spray of sparks. Specially coated to be used in oil and moisture environments.

Maximum temp. = 550°C, Weight = 460 g, Colour = Grey.

.2m x 1m 0700 008 026

2m x 2m 0700 008 027

1m x 25m roll 0700 008 028

Uncoated Heat treated fibreglass blanket for light medium sparks and light spatter.

Very flexible.

Maximum temp. = 550°C, Weight = 600 g, Colour = Tan.

2m x 1m 0700 008 023

2m x 2m 0700 008 024

1m x 25m roll 0700 008 025

Medium Duty Application

Welding Blanket 3001 ----- > LD550

Welding Blanket 1850 ----- > MD550

Page 4: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Product picture

Placed left or right

depending on angle

Quality accessories for the quality welderESAB offers a wide range of accessories. The complete range, along with product information, is available at our local web-sites, look at www.esab.com or contact your local ESAB dealer.

Unrivalled service and supportOur commitment and ability to deliver the expected service and support starts immediately after the order is confirmed. We endeavour to offer our customers an After Sales service, which is second to non. A strong and skilful service organisation is prepared to offer service and maintenance, calibration, validation and upgrading of equipment and software.

The service organisation will offer standardised solutions for the reconditioning or modification of existing products.

ESAB Sverige AB

Box 8004402 77 GÖTEBORGTel. 031 50 95 00Fax 031 50 92 22www.esab.se

Uncoated Vermiculite coated silica welding blanket for heavy medium duty applications. The silica fibre has a high melting temperature of over 1600 °C 1350°C making it an excellent choice when drops of molten metal are a problem. The 2-1900MD1300 blanket resists most acids.

Maximum temp = 1300°C, Weight = 600 g, Colour = Bronze.

2m x 1m 0700 008 032

2m x 2m 0700 008 033

1m x 25m roll 0700 008 034

2m x 1m 0700 008 029

2m x 2m 0700 008 030

1m x 25m roll 0700 008 031

Heavy Duty Application

A carbon fibre felt welding blanket for heavy duty applications. This blanket offers extreme heat resistance of 1650°C. The 5180 is extremely light and simple to clean and it’s been designed for the automotive industry.

Maximum temp. = 1300°C, Weight = 425 g, Colour = Black.

2m x 1m 0700 008 035

2m x 2m 0700 008 036

1m x 25m roll 0700 008 037

Welding Blanket 5180

Welding Blanket 2-1900 ----- > MD1300

Medium Duty Application

Fibreglass blanket with specifically formulated graphite and polyurethane solution, which provides high temperature and abrasion resistance. Suitable for medium to heavy duty industrial applications. Not suitable in very oily situations

Maximum temp = 750 °C, Weight = 1020g, Colour = Black

Welding Blanket 906 ----- > HD750

Page 5: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding ClothingOffering complete proection to the welder

The ESAB Black and Yellow coverall has been designed to give the welder maximum protection. The garment is made from a highly durable and flame resistant material. The coverall features an elasticised waist for better comfort and fit, adjustable sleeves and legs and a covered / protected zipper. The neck is protected by the stand up collar and knee pads can be fitted.

ESAB Coverall

ESAB welders coverall, size S 0700 010 328

ESAB welders coverall, size M 0700 010 329

ESAB welders coverall, size L 0700 010 330

ESAB welders coverall, size XL 0700 010 331

ESAB welders coverall, size XXL 0700 010 332

Welding Coveralls (Flame Retardant)

The ESAB navy fire retardant 100% cotton coverall comes with 2 chest pockets, a ruler pocket and has concealed stud fastenings. Conforms to

EN 531, EN 470-1 & EN 533.

ESAB Proban coverall, M 0700 010 038

ESAB Proban coverall, L 0700 010 039

ESAB Proban coverall, XL 0700 010 040

ESAB Proban coverall, XXL 0700 010 041

Page 6: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ESAB Sverige ABBox 8004402 77 GÖTEBORGTel. 031 50 95 00Fax 031 50 92 22www.esab.se

Welding Jacket Comfort

The Proban/leather jackets are designed for maximum comfort and safety. The sleeves and shoulders are made in durable grade A leather to withstand the exposure to welding spatter. The front and back is made from flame retardant Proban material. The garment feature concealed inner pockets, adjustable sleeves and a stand up collar. Kevlar stitched.

ESAB welding jacket, M 0700 010 301

ESAB welding jacket, L 0700 010 302

ESAB welding jacket, XL 0700 010 303

ESAB welding jacket, XXL 0700 010 304

Welding Trousers Comfort

The Proban/Leather trousers are designed for maximum comfort andsafety. The front of the legs are reinforced with leather to withstand the spatter and welding sparks. Kevlar stitched.

ESAB welding trousers, M 0700 010 333

ESAB welding trousers, L 0700 010 334

ESAB welding trousers, XL 0700 010 335

ESAB welding trousers, XXL 0700 010 336

Quality accessories for the quality welderESAB offers a wide range of accessories. The complete range, along with product information, is available at our local web-sites, look at www.esab.com or contact your local ESAB dealer.

Unrivalled service and supportOur commitment and ability to deliver the expected service and support starts immediately after the order is confirmed. We endeavour to offer our customers an After Sales service, which is second to non. A strong and skilful service organisation is prepared to offer service and maintenance, calibration, validation and upgrading of equipment and software.

The service organisation will offer standardised solutions for the reconditioning or modification of existing products.

Spare and wear parts are manufactured according to ESAB’s quality plan. Exchange Printed Circuit Board (PCB), exchange modules and components are available for all our products in order to reduce downtime to an absolute minimum. ESAB is continuously upgrading authorised service partners for local service support. Customers who have their own service and maintenance personnel will always be offered a service-training package as part of a total ESAB offering. However, product and process training for end-users will form an additional part of the ESAB offering. Always ask your ESAB sales representative or distributor for a complete ESAB solution.

Page 7: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

18

Helmets, Masks & ScreensWarrior ™ Tech

Variable shade level DIN 9-13

High optical class 1/2/1/2 according to EN 379

Large field of view 98 x 48mm

Lightweight – only 520g

4 sensors ensure correct read off

Robust head harness – easy to adjust

Ergonomic sweat band – increased comfort

Variable sensitivity with internal knob

Variable delay with internal knob

Magnifying glass available as an accessory

The WARRIOR™ Tech helmet has been designed to meet the needs of a variety of welders, providing a high tech lightweight shell to protect from heat, sparks and spatter. The welding lens gives a high clarity of view, resulting in an excellent optical quality utilising the latest ADF technology.

The WARRIOR™ Tech helmet provides ideal functionality, performance and comfort to the occasional welder, maintenance and construction workers through to the professional welder.

Helmet weighs only 520g

4x

Min Max

Low Hi

ENHANCED PERFORMANCE Four Arc sensors for higher response and wider coverage

Optimal performance for mostfabrication and out-of-position welding

SENSITIVITY CONTROL An adaptable feature useful whenwelding low amperages (TIG) forbetter reaction to darker Arc light

LARGE VIEWING AREA 98mm x 48mm (3.85" x 1.88")

Giving a wider field of vision increasing spatial awareness

1/2/1/2 – Optical Class 9–13 shade level

DELAY CONTROL Enabling the welder to set how long the lens stays dark after welding arc stops

Short delay helps get the job done faster during tack welding, whilst longer delay is useful for high amperage welding

Page 8: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

19

Helmets, Masks & Screens

Warrior Tech 9-13

Warrior ™ Tech

ADJUSTABLETo extend from 6 ½" up to 9"

ADJUSTABLE PUSH RACHETFor better fit and comfort

5 POINT RAKEAdjusting the position of helmet to 5 different angles

Angled front pad sits flat on forehead, reducing frontal lobe pressure

LONGITUDINAL ADJUSTMENT3 longitudinal adjustments to increase field of vision

Available with dioptre configurations as standard

Warrior™ Tech 9-13 is an automatically dimming welding helmet for MIG/MAG, MMA and TIG welding (>20 Amp) with infinitely variable shade levels from DIN 9-13. The external adjustment knob makes it easy for the welder to adjust the shade level. Sensitivity and delay can be adjusted according to requirements. The Warrior™ Tech 9-13 helmet is available in two colours; classic black or tough ESAB yellow. Lightweight, only 520g. Built-in battery charged by solar cells. The welding helmet is recommended for MIG/MAG, TIG and MMA welding (>20 Amp). High optical quality 1-2-1-2. CE approved according to both EN 379 and EN 175.

Warrior™ Tech 9-13, black 0700 000 400Warrior™ Tech 9-13, yellow 0700 000 401

Page 9: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

20

Helmets, Masks & ScreensWarrior ™ Tech Combinations

All Warrior™ Tech helmets are prepared for fresh air with the fresh air units Aristo® Air and Eco Air. Warrior™ Tech helmets prepared for fresh air supplied fully fitted with flame-proof head and face seal and air duct. Lightweight and the best possible protection for the discerning welder. Fresh air unit purchased separately.

Warrior™ Tech 9-13 black prepared for fresh air 0700 000 405Warrior™ Tech 9-13 yellow prepared for fresh air 0700 000 406Eco Air IQ kit incl. air hose 0700 002 175

Spares for Eco Air, see page 53.

Warrior Tech 9-13 Prepared for Fresh Air

Warrior™ Tech offers the welder the unique possibility of removing the hard hat with one hand movement. This means optimum safety and the best ergonomics for the welder – the helmet is used when required, while the neck is not put under strain unnecessarily. The welding helmet’s usual head harness is replaced with the unique helmet adapter (0700 001 005), which secures the hard hat in place. The hard hat is made of ABS and only weighs 300g. Available in six different colours. Supplied with sweat band. CE approved according to EN 397. Helmet mounted hearing protection available as an option.

Warrior™ Tech 9-13 black 0700 000 400Warrior™ Tech 9-13 yellow 0700 000 401Helmet adapter Universal Concept 0700 001 005

Hard hat Concept yellow 0700 000 052Hard hat Concept white 0700 000 135Hard hat Concept blue 0700 000 136Hard hat Concept green 0700 000 137Hard hat Concept red 0700 000 138Hard hat Concept orange 0700 000 142Sweat band Concept hard hat, pack of 10 0700 000 140Head harness Concept hard hat, pack of 10 0700 000 141Hearing protection Universal SNR 29 dB 0700 001 009Hearing protection Universal with FM-radio SNR 29 dB 0700 001 010

Warrior Tech 9-13 with Hard Hat

Warrior™ Techprepared for fresh air

0700 000 405 & 0700 000 406

Eco Air incl.air hose

0700 002 175

Completewelding helmet

with fresh air unit

Hearing protection or Hearing protection

with radio

Warrior™ TechHelmet adapter

Universal Concept 0700 001 005

Hard hatConcept

Complete welding helmet with

hard hat

Page 10: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.
Page 11: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

22

Helmets, Masks & ScreensWarrior ™ Tech – Spares

Spares for Warrior Tech 9-13

Spares for Warrior Tech Prepared for Air

1 Head harness ..................................................................................................................................0700 000 4152 Sweat band, pack of 2 ....................................................................................................................0700 000 4143 Protective glass outside, pack of 10 ................................................................................................0700 000 0104 Protective glass inside .....................................................................................................................0700 000 4165 Mounting frame cassette .................................................................................................................0700 000 4186 Cassette holder incl. screws ...........................................................................................................0700 000 4197 Cassette Warrior™ Tech 9-13 .............................................................................................Not sold separately* Magnifying lens +1,0 dioptre ...........................................................................................................0700 000 084* Magnifying lens +1,5 dioptre ...........................................................................................................0700 000 085* Magnifying lens +2,0 dioptre ...........................................................................................................0700 000 086* Magnifying lens +2,5 dioptre ...........................................................................................................0700 000 087* Leather chest protector for welding helmet .....................................................................................0700 000 062* Leather head and chest protector for welding helmet .....................................................................0700 000 063

* Not shown

For accessories such as magnifying glass, hard hats etc., see page 42-46.

8 Head and face seal Warrior™ Tech ..................................................................................................0700 000 4219 Warrior™ Tech head gear including air duct .......................................................................................0700 000 42010 Air hose for Warrior/Eco Air ..............................................................................................................0468 127 011

Spares for Eco Air, see page 53.

Spare parts Warrior™ Tech 9-13 andWarrior™ Tech Prepared for Air

6

54 3

21

7

8

10

9

Page 12: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Global solutions for local customers – everywhere.

Find out more on www.esab.com

Part No: XA00155720FMS/105062

World leader in welding and cutting technology and systems

ESAB operates at the forefront of

welding and cutting technology. Over

one hundred years of continuous

improvement in products and processes

enables us to meet the challenges of

technological advance in every sector

in which ESAB operates.

Quality and environment standards

Quality and the environment are two

key areas of focus. ESAB is one of

few international companies to have

achieved the new ISO 14001 standard

in Environmental Management

Systems across all our global

manufacturing facilities.

At ESAB, quality is an ongoing

process that is at the heart of all our

production processes and facilities

worldwide. Multinational manufacturing,

local representation and an international

network of independent distributors

brings the benefits of ESAB quality

and unrivalled expertise in materials

and processes within reach of all our

customers, wherever they are located.

ESA

B r

eser

ves

the

right

to

alte

r sp

ecifi

catio

ns w

ithou

t pr

ior

notic

e.

The ESAB group is certified

according to ISO 14001 &

OHSAS 18001

PPE & Welding Accessories

PP

E &

Weld

ing A

ccesso

ries

Personal Protection

Welding tools and accessories

sPecial Process equiPment

Page 13: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

WorldSince 1904, ESAB has been both a pioneer and leader in welding and cutting development technology. Today ESAB combines world leadership with global applications expertise.

Page 14: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

With over 100 years of experience, and a presence in over 80 countries worldwide, ESAB is probably the most recognised brand in welding and cutting with a product portfolio, which includes:

Standard Welding and Cutting Equipment

Automatic Equipment

Automated Cutting Equipment

Welding Consumables

Personal Protective Equipment (PPE)

Welding Accessories

By continuously improving and developing our products and manufacturing processes, we meet the challenges of technological advance in every sector and market we operate in. Delivering quality products and services remains at the heart of everything we do across all our global sales and product operations.

leaderin welding and cutting technology and systems

Page 15: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks and Screens 4-22

Filter & Spatter Lenses 23

Hard Hats & Hearing Protection 24-25

Respiratory Equipment 26-35

Spectacles, Goggles & Visors 36-39

Welding Clothing and Coveralls 40-46

Head Protection 47

Welding Gloves 48-55

Safety Footwear 56

Personal Protection

Welding Curtains 58-59

Welding Blankets 60-61

Cables, Connectors and Electrode Holders 62-65

Clamps 65-67

Anti Spatter 68

Chemical Sundries and Indicators 69-70

Chipping Hammers 71-72

Fillet Gauges 72-73

Small Tools 73-75

Cylinder Trolleys 76

Welding Tools & Accessories

Drying Equipment 78-85

Tungsten Grinders 86-88

Tungsten Electrodes 88-89

Gouging Torches and Spares 90-93

Fume Extraction Units 94

Special Process Equipment

Contents

Page 16: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ESAB offer a comprehensive range of Personal Protection Equipment, covering everything from head to toe, for both welding and cutting and general engineering applications. All ESAB and ISO products conform to international standards and relevant EU legislation and standards.

As health and safety standards improve year on year, so does ESAB’s commitment to providing a product portfolio capable of meeting the ever increasing demands of the markets we serve. As you would expect from a leading supplier of welding and cutting solutions, the ESAB product range is second to none for quality and reliability.

Personal Protection

Page 17: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

4

Helmets, Masks & Screens

Aristo® Tech

Lens Technology• Variable 5-13 Digital control

for adjustment of shade level,

sensitivity and delay

• Optical Class 1/1/1

• Quick Set™ allows an easy

change of shade by a simple up

and down flick of the switch

• Grind mode activated at

lowest sensitivity

Comfort Head Gear• Comfortable, lightweight and fully

adjustable ratchet style headgear

delivers maximum comfort

Shell• 3 high gloss colours available –

yellow, black & white

• Conforms to:

CE, ANSI, AS/NZS, CSA

ESABs latest integrated Circuit LENS Technology, offers an internal LCD display with outstanding reliability, suitable for all manual welding processes, including plasma cutting.

• Digital Display Screen

• Lens Delay Control

• Visible Shade & Sensitivity Settings

The Aristo® Tech helmet has been designed for the professional welder who wants the best in protection and performance. The light weight shell and ergonomically designed headgear offers maximum comfort even when welding for long periods of time. The Aristo® Tech offers the latest in digital lens technology, with internal LCD display, providing the welder full control to adjust shade level, sensitivity and delay settings with precision for any welding application.

MIG

Designed for use with a wide range of welding applications

Helmet weighs only 490g

Page 18: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

5

Helmets, Masks & Screens

Painted black shell with yellow decal design.

Aristo® Tech 5-13 Black 0700 000 353

Aristo® Tech Black

HEAD GEAR

• Robust head gear

• Possibility to move the helmet closer or further away from the face

• Comfortable and replaceable sweat band

• Angled front head band

Painted yellow shell with black decal design.

Aristo® Tech 5-13 Yellow 0700 000 354

Aristo® Tech Yellow

Painted white shell with black and yellow decal design.

Aristo® Tech 5-13 White 0700 000 355

Aristo® Tech White

FRoNT CovER LENS

The Aristo® Tech front cover lens offers the ultimate in Protection. This lens has been coated for increased scratch and heat resistance. Using a specialised injection moulding process, the lens is pre moulded into a convex curve with an optical class 1. This means that the threat of duplicate ghost Arcs visible through the cartridge is eliminated.

AvAILABLE IN 3 HIGH GLoSS CoLoURS

CoATED SCRATCH

RESISTANT CovER LENS

AS STANDARD

Page 19: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

6

Helmets, Masks & Screens

The Aristo® Tech can be equipped with a magnifying lens. The magnifying lens is fitted from the inside (so no adapter is needed). There are four different diopters available, +1,0 / +1,5 / +2,0 / +2,5.

Diopter +1,0 Aristo® Tech 0700 000 084Diopter +1,5 Aristo® Tech 0700 000 085Diopter +2,0 Aristo® Tech 0700 000 086Diopter +2,5 Aristo® Tech 0700 000 087

Aristo® Tech Magnifying Lenses

50mm

110mm

1 Helmet shell Aristo® Tech Yellow 0700 000 365 1 Helmet shell Aristo® Tech Black 0700 000 366 1 Helmet shell Aristo® Tech White 0700 000 367 * Head gear 0700 000 368 * Sweat band 0700 000 369 2 Front cover lens – Standard 0700 000 010 2 Front cover lens – Hard coated 0700 000 370 3 Inside cover lens 0700 000 371 4 Cartridge 5-13 assembly 0700 000 372 5 Potentiometer / Sensitivity knob 0700 000 373

* Not shown

Spares for Aristo® Tech 5-13 (Fig 1)

Spares for Aristo® Tech 5-13 Fig 1

3

5

4 2

1

Page 20: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

7

Helmets, Masks & Screens

Page 21: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

8

The Aristo® Tech helmet can be used in combination with the Aristo® Air PAPR unit and compressed air. The helmets are delivered fully assembled, incl. flame resistant head and face seal and air duct.

Aristo® Tech Black prepared for fresh air 0700 000 356Aristo® Tech White prepared for fresh air 0700 000 357Aristo® Tech Yellow prepared for fresh air 0700 000 358

Aristo® Tech Helmets Prepared for Fresh Air

The Aristo® Tech with internal visor is delivered with an air fed grade B impact protection grinding visor complete with a face and head seal. The grinding visor can be fitted in any of the standard Aristo® Tech helmets and can be combined with the Aristo® Air PAPR unit. This would be the ideal system for all applications involved in welding fabrication. One head system for welding and grinding.

Aristo® Tech Black with internal visor 0700 000 359Aristo® Tech White with internal visor 0700 000 360Aristo® Tech Yellow with internal visor 0700 000 361

Aristo® Tech with Internal visor

By removing the head harness and replacing it with a hard hat adapter (0700 000 230) the Aristo® Tech can be fitted on to ESAB’s protective helmet. The combination is very well balanced and comfortable to wear. The Aristo® Tech helmet can be detached and reattached in a second. The specially designed hard hat meets the highest standards and it’s equipped with ratchet adjustment. Conforms to EN 397.

Aristo® Tech Black 0700 000 353Aristo® Tech White 0700 000 354Aristo® Tech Yellow 0700 000 355Hard Hat adapter for Aristo® Tech 0700 000 230Hard Hat Concept Yellow 0700 000 052Hard Hat Concept White 0700 000 135Hard Hat Concept Blue 0700 000 136Hard Hat Concept Green 0700 000 137Hard Hat Concept Red 0700 000 138Hard Hat Concept Orange 0700 000 142

Aristo® Tech with Hard Hat

Helmets, Masks & Screens

Aristo® Tech Combinations

Colours available

Page 22: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

9

Hearing protection with neck support is available for the Aristo® Tech. SNR rating = 26 dB.

Hearing protection with neck support 0700 001 880

Aristo® Tech Hearing Protection

All Aristo® Tech welding helmets can be used in combination with a hard hat (only black available) and Aristo® Air PAPR units. The helmets are delivered fully assembled, incl. hard hat with internal air duct and flame resistant head and face seal.

Aristo® Tech Black with hard hat prepared for fresh air 0700 000 362Aristo® Tech White with hard hat prepared for fresh air 0700 000 367Aristo® Tech Yellow with hard hat prepared for fresh air 0700 000 368

Aristo® Tech Helmets with Hard Hat Prepared for Fresh Air

The Aristo® Tech can be equipped with a magnifying lens. The magnifying lens is fitted from the inside (so no adapter is needed). There are four different diopters available, +1,0 / +1,5 / +2,0 / +2,5.

Diopter +1,0 Aristo® Tech 0700 000 084Diopter +1,5 Aristo® Tech 0700 000 085Diopter +2,0 Aristo® Tech 0700 000 086Diopter +2,5 Aristo® Tech 0700 000 087

Aristo® Tech Magnifying Lenses

Accessories for Aristo® Tech

Helmets, Masks & Screens

Head Seal for internal visor 0700 002 167Face Seal for internal visor 0700 002 168Spare Visor for internal visor 0700 002 169Tear off visor for internal visor 0700 002 054Head Seal for hard hat 0700 002 170Face Seal for hard hat 0700 002 171Hard Hat with internal air duct 0700 002 172

Spares for Aristo® Tech Combinations

50mm

110mm

Page 23: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

10

The new ‘Angular Dependence Compensation’

Plus (ADC) ensures that the selected shade covers

the full width and height of the LCD screen, whilst

the addition of the Plus offers improved colour

definition and contrast throughout the cartridge.

There are 3 helmets in the New-Tech™ ADC Plus range all offering superb performance and the ultimate in operator protection and comfort.

• Increased colour definition

• Lighter contrast

• External adjustable shade

• External adjustable sensitivity

• External delay adjustment

• Superb optical quality

1/1/1/1 EN379

New-Tech™ 9-13 ADC Plus

New-Tech™ 6-13 ADC Plus

New-Tech™ 6-13 XL ADC Plus

The ADC plus is the second phase technology from the original New-Tech™ ADC range of welding helmets from ESAB, a market-leading supplier of welding related personal protection equipment. As a result of extensive research into typical application and user comfort requirements, the ESAB New-Tech™ ADC Plus cartridge offers new features, which make these new helmets unique.

Helmets, Masks & Screens

New-Tech™ ADC Plus

optical class 1, 2 or 3 – indicates optical quality of the ocular. Class 1 is the best

Light diffusion class – (switchable fi lters only) 1,2 or 3 – indicates light diffusion by the ocular. Class 1 is the best.

variations in luminous tranmittance – (switchable fi lters only) 1,2 or 3 – indicates shade variability in the dark state of the ocular. Class 1 is the best.

Angle dependence of luminous transmittance class (optional) – If applicable, marked before the standard number. Classes 1, 2 or 3 with class 1 is the best.

Page 24: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

11

oPEN STATE

ADC Plus Colour DefinitionThe ADC Plus range offers superior colour definition in both the open and activated state, allowing the welder to better see the LED displays on machines and equipment, whilst also identifying heat definition on the actual weld.

CLoSED STATE

ADC Plus optical QualityThe ADC Plus cartridge boasts a 1/1/1/1 optical quality rating, which is the best on the market. This means that an even shade level is seen across the full height and width of the viewing area.

The benefits – an increased shaded area that covers the height and width of the cartridge, whilst reducing bright visible light.

Extra large 96 x 68.5mm viewing area

STAnDARD ADC PLUS SIZE XL ADC PLUS SIZE

STAnDARD non ADC PLUS CARTRIDGE ADC PLUS CARTRIDGE

STAnDARD non ADC PLUS CARTRIDGE ADC PLUS CARTRIDGE

XL vIEWING AREA

The New-Tech™ 6-13 XL

ADC Plus helmet offers an

increased cartridge viewing

area of 96 x 68.5mm.

The New-Tech™ ADC Plus Difference

Helmets, Masks & Screens

Page 25: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

12

Helmets, Masks & Screens

The New-Tech™ 6-13 can be used for almost any application. The shade level can be adjusted from DIN 6 to DIN 13, making this helmet very versatile. All settings are made from the outside of the helmet. The helmet features a grinding mode, where the cartridge can be switched off for grinding, there is also a sensitivity and delay function. The New-Tech™ 6-13 is equipped with ADC technology which will ensure a solid shade level even when viewing the lens at an angle, i.e. positional welding. Conforms to EN 175 and EN 379.

New-Tech™ 6-13 ADC Plus 0700 000 956

New-Tech™ 6-13 ADC Plus

The New-Tech™ 9-13 ADC offers the latest ADC-technology which will ensure a solid shade level even when viewing the lens at an angle, i.e. positional welding. The settings, such as shade level DIN 9 to 13, sensitivity and delay, are made from the outside of the helmet. The New-Tech™ 9-13 is suitable for almost all applications, TIG, MIG/MAG, MMA and gas welding/cutting. Conforms to EN 175 and EN 379.

New-Tech™ 9-13 ADC Plus 0700 000 957

New-Tech™ 9-13 ADC Plus

The New-Tech™ 6-13 XL can be used for almost any application. The shade level can be adjusted from DIN 6 to DIN 13, making this helmet very versatile. All settings are made from the outside of the helmet. The helmet features a grinding mode, where the cartridge can be switched off for grinding, there is also a sensitivity and delay function. The New-Tech™ 6-13 XL is equipped with ADC technology which will ensure a solid shade level even when viewing the lens at an angle, i.e. positional welding. Conforms to EN 175 and EN 379.

New-Tech™ 6-13 XL ADC Plus 0700 000 955

New-Tech™ 6-13 XL ADC Plus

Page 26: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

1

2

4

5

67

9

8

3

13

Helmets, Masks & Screens

1 Helmet shell New-Tech™ 0700 000 269 2 Cartridge New-Tech™ 6-13 XL ADC Plus 0700 000 270 3 Adjustment knob kit 0700 000 223 4 Front cover lens New-Tech™ (90 x 110mm) 0700 000 227 4 Front cover lens CR39 New-Tech™ (90 x 110mm) 0700 000 139 5 Supporting frame New-Tech™ 0700 000 220 6 Metal locking spring New-Tech™ 0700 000 221 7 Inside cover lens New-Tech™ XL (107 x 71mm) 0700 000 268 8 Sweat band New-Tech™ 0700 000 231 8 Sweat band New-Tech™ for Air 0700 000 271 9 Head gear complete New-Tech™ 0700 000 222 * Fresh air mounting kit for New-Tech™ 0700 002 047

* Not shown

Spares for New-Tech™ 6-13 XL ADC Plus (Fig 2)

Spares for New-Tech™ ADC Plus Fig 2

1 Helmet shell New-Tech™ 0700 000 269 2 Cartridge New-Tech™ 9-13 ADC Plus 0700 000 273 2 Cartridge New-Tech™ 6-13 ADC Plus 0700 000 200 3 Adjustment knob kit 0700 000 223 4 Front cover lens New-Tech™ (90 x 110mm) 0700 000 227 4 Front cover lens CR39 New-Tech™ (90 x 110mm) 0700 000 139 5 Supporting frame New-Tech™ 0700 000 220 6 Metal locking spring New-Tech™ 0700 000 221 7 Inner cover lens New-Tech™ (50 x 110mm) 0700 000 228 8 Sweat band New-Tech™ 0700 000 231 8 Sweat band New-Tech™ for Air 0700 000 271 9 Head gear complete New-Tech™ 0700 000 222 * Fresh air mounting kit for New-Tech™ 0700 002 047

* Not shown

Spares for New-Tech™ 9-13 / 6-13 ADC Plus (Fig 2)

Page 27: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

14

The New-Tech™ with internal visor is delivered with an air fed grade B impact protection grinding visor complete with a face and head seal. The grinding visor can be fitted in any of the standard New-Tech™ helmets and can be combined with either the Aristo Air, Air 160, Air 200 or compressed air respiratory systems. This would be the ideal system for all applications involved in welding fabrication. One head system for welding and grinding. Follow three simple steps to make up your combination: 1. Select the New-Tech™ helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require.

New-Tech™ 6-13 XL ADC Plus with internal visor 0700 000 310New-Tech™ 6-13 ADC Plus with internal visor 0700 000 288New-Tech™ 9-13 ADC Plus with internal visor 0700 000 289

New-Tech™ with Internal visor

By removing the head harness and replacing it with a hard hat adapter (0700 000 230) the New-Tech can be fitted on to ESAB’s protective helmet. The combination is very well balanced and comfortable to wear. The New-Tech™ helmet can be detached and reattached in a second. The specially designed hard hat meets the highest standards and it’s equipped with ratchet adjustment. 1. Select the New-Tech™ helmet. 2. Select the hard hat adapter. 3. Select the hard hat.

New-Tech™ 6-13 XL ADC Plus 0700 000 305New-Tech™ 6-13 Plus ADC 0700 000 280New-Tech™ 9-13 Plus ADC 0700 000 281Hard Hat adapter for New-Tech 0700 000 230Hard Hat Concept Yellow 0700 000 052Hard Hat Concept White 0700 000 135Hard Hat Concept Blue 0700 000 136Hard Hat Concept Green 0700 000 137Hard Hat Concept Red 0700 000 138Hard Hat Concept Orange 0700 000 142

New-Tech™ with Hard Hat

Helmets, Masks & Screens

New-Tech™ Combinations

Colours available

All New-Tech™ welding helmets can be used in combination with Aristo Air, Air 160, Air 200 and compressed air units. The helmets are delivered fully assembled, incl. flame resistant head and face seal and air duct. Follow three simple steps to make up your combination: 1. Select the New-Tech™ helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require.

New-Tech™ 6-13 XL ADC Plus prepared for fresh air 0700 000 954New-Tech™ 6-13 ADC Plus prepared for fresh air 0700 000 284New-Tech™ 9-13 ADC Plus prepared for fresh air 0700 000 285

New-Tech™ Helmets Prepared for Fresh Air

Page 28: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

15

Hearing protection with neck support is available for the New-Tech. SNR rating = 26 dB.

Hearing protection with neck support 0700 001 880

New-Tech™ Hearing Protection

All New-Tech™ welding helmets can be used in combination with a hard hat, Aristo Air, Air 160, Air 200 and compressed air units. The helmets are delivered fully assembled, incl. hard hat with internal air duct and flame resistant head and face seal. Follow three simple steps to make up your combination: 1. Select the New-Tech™ helmet package that you require. 2. Select the hose kit you require. 3. Select the air unit your require.

New-Tech 6-13 XL ADC Plus prepared for fresh air + hard hat 0700 000 311New-Tech 6-13 ADC Plus prepared for fresh air + hard hat 0700 000 292New-Tech 9-13 ADC Plus prepared for fresh air + hard hat 0700 000 293

New-Tech™ Helmets with Hard Hat Prepared for Fresh Air

The New-Tech™ can be equipped with a magnifying lens. The magnifying lens is fitted from the inside (so no adapter is needed). There are four different diopters available, +1,0 / +1,5 / +2,0 / +2,5.

Diopter +1,0 New-Tech™ 0700 000 084Diopter +1,5 New-Tech™ 0700 000 085Diopter +2,0 New-Tech™ 0700 000 086Diopter +2,5 New-Tech™ 0700 000 087

New-Tech™ Magnifying Lenses

Accessories for New-Tech™

Helmets, Masks & Screens

Head seal for internal visor 0700 002 051Face seal for internal visor 0700 002 052Spare visor for internal visor (Pack of 20) 0700 000 229Tear off visor for internal visor 0700 002 054Head seal for hard hat 0700 000 093Face seal for hard hat 0700 000 094Hard hat with internal air duct 0700 000 097

Spares for New-Tech™ Combinations

50mm

110mm

Page 29: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens

The Origo™ Tech 9-13 features an external shade adjustment between DIN 9 and DIN 13. The delay and sensitivity can be adjusted from the inside. The Origo™ Tech 9-13 is suitable for MIG/MAG, MMA and TIG (over 20 amps). Conforms to EN 175.

Origo™ Tech Black 0700 000 296Origo™ Tech Yellow 0700 000 298

origo™ Tech 9-13

By removing the head harness and replacing it with a hard hat adapter (0700 000 230) the Origo™ Tech can be fitted on to ESAB’s protective helmet. The combination is very well balanced and comfortable to wear. The Origo™ Tech can de detached and reattached in a second. The specially designed hard hat meets the highest standards and its equipped with a ratchet adjustment. 1. Select the Origo™ Tech Helmet. 2. Select the hard hat adapter. 3. Select the hard hat colour.

Origo™ Tech Black 0700 000 296Origo™ Tech Yellow 0700 000 298Hard Hat Concept Yellow 0700 000 052Hard Hat Concept White 0700 000 135Hard Hat Concept Blue 0700 000 136Hard Hat Concept Green 0700 000 137Hard Hat Concept Red 0700 000 138Hard Hat Concept Orange 0700 000 142Hard Hat Adaptor 0700 000 230

origo™ Tech with Hard Hat

Origo™ Tech 9-13

The Origo™ Tech helmet is available in two striking high gloss colours, ‘Yellow’ or ‘Black’. The helmet features the ESAB comfort headgear, whilst the light weight shell offers superior face, head, ear & neck protection, which allows for welding in all positions. The ESAB variable shade ADF uses the latest technology and has proven reliability. The ADF is screw retained and sits in a fully moulded light seal cradle, which also creates a slight convex curve on the front spatter lens for extra security and strength. The Helmet is delivered in an ESAB display box, fully assembled and ready to use.

16

Colours available

Page 30: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

6

5

4

3

2

1

100mm

85mm

45mm

105mm

Helmets, Masks & Screens

1 ESAB head gear pro 0700 000 243 2 Sweat band head gear pro (Pack of 2) 0700 000 244 2 Sweat band head gear prepared for air 0700 000 274 3 Front cover lens Origo™ Tech (85 x 100mm) 0700 000 245 4 Inside cover lens Origo™ Tech (105 x 45mm) 0700 000 246 5 ESAB 9-13 ADF cradle 0700 000 235 6 Lens retainer with screws 0700 000 237

Spares for origo™ Tech 9-13 (Fig 3)

Spares for Origo™ Tech 9-13 Fig 3

17

The Origo™ Tech 9-13 prepared for Air is delivered fully assembled and ready to attach to the Origo™ Air Unit. The unit includes: Origo™ Tech helmet, head gear, air duct & head and face seal.

Origo™ Tech 9-13 Prepared for Air Black 0700 000 300Origo™ Tech 9-13 Prepared for Air Yellow 0700 000 301

origo™ Tech 9-13 Prepared for Air

The Origo™ Air can be adapted to any standard Origo™ Tech helmet that has been previously purchased. We offer the Origo™ Tech helmet prepared for Air Excluding the ADF cartridge , this means the user must then remove the ADF from the existing helmet and fit it to the new shell to complete the system.

Origo™ Tech Shell Prepared for Air Excluding ADF Black 0700 000 302Origo™ Tech Shell Prepared for Air Excluding ADF Yellow 0700 000 303

origo™ Tech Prepared for Air Excluding ADF

Page 31: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens

Eco-Arc Welding Helmets

The new Eco-Arc is the latest design in flip front passive welding helmets. With a light weight Poly Propylene shell, and outstanding facial protection, the helmet is suitable for all position welding. Available in six different sized flip front options, the helmet also adopts the new Eco Headgear, with 4 rake positions and 3 longitudinal adjustment positions for precise nose to shell adjustment. The helmet is supplied complete with outer protection lens, shade 11 mineral glass and the unique large internal protection glass. Conforms to EN 175.

18

Page 32: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Eco-Arc 60 x 110 un-assembled - 20 pcs* 0700 000 938Eco-Arc 60 x 110 individually packed 0700 000 950Eco-Arc 90 x 110 un-assembled - 20 pcs* 0700 000 939Eco-Arc 51 x 108 un-assembled - 20 pcs* 0700 000 940Eco-Arc 83 x 108 un-assembled - 20 pcs * 0700 000 941Eco-Arc 98 x 75 un-assembled - 20 pcs* 0700 000 942

* This helmet is delivered with the head gear unattached.

Eco-Arc Helmets – Din 11

Helmets, Masks & Screens

1 Inside cover lens Eco-Arc 0700 000 252 2 Sweat band 0700 000 279 3 Lens retaining clip 60 x 110 0700 000 255 3 Lens retaining clip 90 x 110 0700 000 256 3 Lens retaining clip 98 x 75 0700 000 257 3 Lens retaining clip 83 x 108 0700 000 258 3 Lens retaining clip 51 x 108 0700 000 260

Spares for Eco-Arc Helmets (Fig 4)

Spares for Eco-Arc Helmets Fig 4

1

3

2

Please see page 23 for standard size lenses

19

Page 33: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Euromask is a helmet for welding and cutting that provides effective protection from UV and IR radiation. The visor must always be down when welding. The large field of vision provides effective protection for the eyes when grinding. Euromask can be combined with various IR and UV protectors. Also available with a protective helmet or prepared for use with a fresh air unit.

Euromask DIN 10 1.7 + 8 DIN 0000 500 501Euromask DIN 11 1.7 + 10 DIN 0000 500 500Euromask with protective helmet DIN 10 0349 501 913Euromask with protective helmet DIN 11 0349 501 912Euromask for protective helmet DIN 10 0000 500 502Euromask for protective helmet DIN 11 0000 500 503Euromask DIN 10 prepared for air 0700 000 901Euromask DIN 11 prepared for air 0700 000 902Air Hose 0468 127 011Chin cover 0000 500 522Visor DIN 5 0000 500 525Visor DIN 8 0000 500 514Visor Large DIN 8 0000 500 318Visor DIN 10 0000 500 515Visor large DIN 10 0349 501 088UV protector clear (inner glass) 0000 500 526UV protection DIN 1.7 (inner glass) 0000 500 512UV protection DIN 3 (inner glass) 0000 500 513UV protection DIN 5 (inner glass) 0000 500 524Visor frame 0000 500 511Head gear 0000 500 519Spare part for head gear 0000 500 520Hinge set for visor 0000 595 208Face seal for fresh air helmet 0700 002 078

Euromask

Helmets, Masks & Screens

The Easy-Lite is a small but effective light source, that can be easily attached to your welding helmet, hard hat, spectacle or anywhere that additional light is required. The Easy-Lite has also proven to be an excellent tool for adapting to a stainless steel inspection mirror, the bright LED is perfect for highlighting the weld in difficult places where there is insufficient light. The LED is turned on by a simple switch, and the battery has over 50 hours of life.

ESAB Easy-Lite – 20 per box 0700 014 040

ESAB Easy-Lite

20

40mm

Page 34: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

This leather mask can be used when there is not enough space for welding with a conventional welding helmet. Glass size 90 x 110mm.

Leather mask 0000 593 221

Leather Mask

A traditional short shell helmet made from high performance glass fibre. Weight 600g. Lens aperture 108 x 83mm (4 1/4” x 31/4”).

SF11 0700 654 889Rubber glass holder Pk 5 0701 380 163Helmet head band foam Pk 10 0701 380 214Lens retaining nut Pk 5 0701 386 154Helmet head band foam Pk 10 (white) 0701 415 838

SF11 Helmet Short Shell

A lightweight thermoplastic helmet weighing 420g. Lens aperture 108 x 83mm (4 1/4” x 31/4”).

SF8 0701 380 430Rubber glass holder Pk 5 0701 380 163Helmet head band foam Pk 10 0701 380 214Lens retaining nut Pk 5 0701 386 154Helmet head band foam Pk 10 (white) 0701 415 838

SF8 Lightweight Helmet

A safe welding screen with replaceable welding glass, 60 x 110mm.

Hand Screen E 0332 109 880

Hand Screen E

Helmets, Masks & Screens

21

Page 35: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

A safe welding screen that also protects the hand. Replaceable welding glass, size 60 x 110mm. Weight 330g.

Hand Screen H with clear and coloured glass 0160 294 880

Does not include welding lens

Hand Screen H

Welding screen that protects the face as well as the hand. The window size is 90 x 110mm. Welding glass not included.

Hand Screen Delta 0700 000 900

Does not include welding lens

Hand Screen Delta

Deep shell fibre glass screen. Weighs 525g. Lens aperture 108 x 83mm (41/4” x 31/4”).

Hand Screen SF12 0700 654 890

Does not include welding lens

Hand Screen SF12

Flat fronted fibreglass hand screen. Weight 450g. Lens aperture 108 x 83mm (41/4” x 31/4”).

Hand Screen SF2 0700 655 002

Does not include welding lens

Hand screen SF2

Helmets, Masks & Screens

22

Page 36: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Filter & Spatter Lenses

Traditional glass filter lenses of excellent UV- and IR protection and thermal stability. Solid glass lenses are not robust and must be used with a polycarbonate backing lens and a glass- or plastic cover lens.

Filter Lenses

Filter Lens 98 x 75 shade 9 Pk 25 0000 915 059Filter Lens 98 x 75 shade 10 Pk 25 0000 904 305Filter Lens 98 x 75 shade 11 Pk 25 0000 915 060Filter Lens 98 x 75 shade 12 Pk 25 0000 915 061Filter Lens 98 x 75 shade 13 Pk 25 0000 915 062Filter Lens 60 x 110 shade 8 Pk 25 0160 292 000Filter Lens 60 x 110 shade 9 Pk 25 0160 292 001Filter Lens 60 x 110 shade 10 Pk 25 0160 292 002Filter Lens 60 x 110 shade 11 Pk 25 0160 292 003Filter Lens 60 x 110 shade 12 Pk 25 0160 292 004Filter Lens 60 x 110 shade 13 Pk 25 0160 292 005Filter Lens 90 x 110 shade 9 Pk 25 0760 031 631Filter Lens 90 x 110 shade 10 Pk 25 0760 031 632Filter Lens 90 x 110 shade 11 Pk 25 0760 031 633Filter Lens 90 x 110 shade 12 Pk 25 0760 031 634Filter Lens 90 x 110 shade 13 Pk 25 0760 031 635Filter Lens 50 x 105 shade 9 Pk 25 0590 028 216Filter Lens 50 x 105 shade 10 Pk 25 0590 028 217Filter Lens 50 x 105 shade 11 Pk 25 0590 028 218Filter Lens 50 x 105 shade 12 Pk 25 0590 028 219Filter Lens 50 x 105 shade 13 Pk 25 0590 028 220

Filter Lens 51 x 108 shade 9 Pk 25 0760 031 601Filter Lens 51 x 108 shade 10 Pk 25 0760 031 602Filter Lens 51 x 108 shade 11 Pk 25 0760 031 603Filter Lens 51 x 108 shade 12 Pk 26 0760 031 604Filter Lens 51 x 108 shade 13 Pk 25 0760 031 605Filter Lens 50mm Diameter shade 4 0000 665 604Filter Lens 50mm Diameter shade 5 0000 665 605Filter Lens 50mm Diameter shade 6 0000 665 606Filter Lens 8EW 108 x 83 (4 1/4” x 3 1/4”) Pk 10 0701 416 367Filter Lens 9EW 108 x 83 (4 1/4” x 3 1/4”) Pk 10 0701 416 369Filter Lens 10EW 108 x 83 (4 1/4” x 3 1/4”) Pk 10 0701 416 371Filter Lens 11EW 108 x 83 (4 1/4” x 3 1/4”) Pk 10 0701 416 373Filter Lens 12EW 108 x 83 (4 1/4” x 3 1/4”) Pk 10 0701 416 375Filter Lens 13EW 108 x 83 (4 1/4” x 3 1/4”) Pk 10 0701 416 376Filter Lens 55 x 110 0700 000 251

A suitable cover lens must be used to protect the filter lens from spatter and damage.

Cover Lens 60 x 110 glass Pk 25 0291 102 701Cover Lens 60 x 110 plastic Pk 100 0160 307 001Cover Lens 90 x 110 glass Pk 100 0760 031 040Cover Lens 90 x 110 plastic Pk 100 0160 307 004Cover Lens 51 x 108 glass Pk 25 0760 031 010Cover Lens 51 x 108 plastic Pk 100 0160 307 002Cover Lens 50 x 105 glass Pk 100 0590 028 221Cover Lens 50 x 105 plastic Pk 100 0590 028 222Cover Lens 98 x 75 glass Pk 100 0000 915 058Cover Lens 98 x 75 plastic Pk 100 0000 915 097Cover Lens 108 x 83 (41/4 x 31/4) glass Pk 10 0701 416 341Cover Lens 108 x 83 (41/4 x 31/4) plastic Pk 10 0701 416 332Cover Lens Diameter 50mm glass Pk 50 0000 665 600Cover Lens Diameter 50mm plastic Pk 50 0000 665 618

CR 39 Cover lenses Cover Lens CR39 108 x 51 (4 1/4 x 2) Pk 10 0701 416 348Cover Lens CR39 108 x 51 (4 1/4 x 2) Pk 100 0701 416 349Cover Lens CR39 108 x 83 (4 1/4 x 3 1/4) Pk 10 0701 416 350Cover Lens CR39 108 x 83 (4 1/4 x 3 1/4) Pk 100 0701 416 351Cover Lens CR39 60 x 110 Pk 10 0701 416 352Cover Lens CR39 90 x 110 Pk 10 0700 000 139

Cover Lenses

23

Page 37: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Hard Hats & Hearing Protection

24

The system consist of a hard hat combined with a flip up polycarbonate visor. Air is feed into the head piece via an air hose from the air unit. ESAB offer visor covers to protect and increase the life of the visor.

Grinding / spraying helmet incl hose 0701 416 189

Spares for grinding / spraying helmet Replacement visor clear 0701 416 233Replacement visor DIN5 green 0701 500 000Visor covers 0701 416 182Face seal 0701 416 234Hearing protection 0701 416 200Brow guard and arms 0700 002 056Hard hat with air duct 0700 000 097

Grinding and Spraying Helmet for Air

Filtered air is ducted from the Power Unit or Regulator up a spiral reinforced PVC hose, and into an air channel. The air is directed into the top of the visor area maximising anti misting around the breathing zone. The visor can be combined with either Air 160/200/CA or compressed air.

Air fed grinding visor including hose 850mm 0700 002 915

Spares for Grinding visor for Air Face seal 0700 002 057Head seal 0700 002 058Replacement visor 0700 002 059

Grinding visor for Air 160/200/CA

Air Fed Grinding Visors

Page 38: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The Hard Hat Concept provides the user with the lightest, strongest and most comfortable helmet available. The helmet is manufactured from ABS material and weighs only ~300g. The head gear is equipped with a ratchet adjustment for easy adjustment and comfort. Approved to EN 397. Compatible with Aristo® Tech, New-Tech™, Origo™ Tech, Albatross and Globe-Arc helmets.

Hard Hat Concept Yellow 0700 000 052Hard Hat Concept White 0700 000 135Hard Hat Concept Blue 0700 000 136Hard Hat Concept Green 0700 000 137Hard Hat Concept Red 0700 000 138Hard Hat Concept Orange 0700 000 142Head Harness Concept 0700 000 141Sweat Band for Hard Hat 0700 000 140

Hard Hat Concept

The ESAB helmet spacer kit has been designed to increase the width of the shell from the headgear allowing a pair of Ear defenders to be worn under the helmet. The spacer adapts to all ESAB welding helmets.

Helmet Spacer kit 0700 001 004

Helmet Spacer Kit

ESAB’s hearing protectors are available in three different versions; One that can be attached to a protective helmet, one with neck support, one with head support. All of these provide effective protection at different decibel levels.

Hearing protector with neck support, SNR 26 dB 0700 001 880Hearing protector with head support, SNR 26 dB 0000 595 199Hearing protector for G2000c, yellow SNR 26 dB 0367 420 003Economy ear defender SNR 21 dB 0701 380 477

Hearing Protection

Hard Hats & Hearing Protection

25

Colours available

Page 39: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

26

Respiratory Equipment

Why use PAPR (Powered Air Purifying Respirator)

The welding fume generated from the open arc welding process contains airborne particles released from the consumables and the material being welded. More than 90% of the fume arises from vaporisation of the consumable electrode, wire or rod as material is transferred across the arc or flame. Welding fume particles can be hazardous as they can penetrate the innermost parts of the lungs.

Long term exposure to welding fumes may affect the body’s respiratory system, for example through substance inhalation and release into the blood system.

ESAB recommends the use of powered air purifying respirators (PAPR) in combination with ESAB’s welding helmet. PAPR units operate by filtering the air through a battery powered unit, which is then supplied into the breathing zone inside the helmet.

ESAB PAPR systems are fitted with a P3 main filter which, if used correctly, can filter out up to 99.8%.

The PAPR should always be used, cleaned, inspected and maintained in accordance with the operating and maintenance instructions provided. A risk assessment should be carried before use to ensure the PAPR system is suitable for the risks involved, the conditions at the place where exposure to the risk may occur, and the period for which it is worn, taking into account the state of health of the person who may wear the equipment, the work to be undertaken and the work environment.

Page 40: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

27

Aristo® Air

• User adjustable air flow 170/210 L/min

• Li Ion battery pack

(up to 8hr duration @ 210L/min)

• P3 filter and pre-filter

• International intelligent charger

(interchangeable pins)

• Audio/visual blocked filter and low

battery alarms

• LED air flow indicator

• Battery charge LED indicator

• Flat push button membrane switch

• Supplied with ‘new style’ comfort pad

The Aristo® Air PAPR (Powered Air Purifying Respirator) system combined with the Aristo® Tech helmet, offers heavy duty protection from welding fume and dust when welding, gouging & grinding. The unit features the latest in PCB Board technology, allowing the welder to adjust the air flow from 170 L/min to 210 L/min to suit the environment and application. This is highlighted by an LED airflow indictor on top of the unit. The Aristo® Air is equipped with audio & visual blocked filter and low battery alarms, offering extra safety for the welder.

The strong physical construction of the Aristo® Air, makes it extremely robust and suitable for all heavy duty welding applications.

Respiratory Equipment

The Aristo® Air PAPR unit is delivered complete and is ready to use. Contents include: Air unit with air hose and hose cover, battery, intelligent charger, comfort pad and P3 filter.

Aristo® Air Complete 0700 002 174

Aristo® Air

Weighs only 1kg

AvailableÊ ÊendÊ ofÊ 2011

AvailableÊ ÊendÊ ofÊ 2011

Page 41: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment

28

The Eco Air powered respiratory systems provides 170 litres of clean/filtered air per minute to give a more pleasant working environment. The unit only weighs 1kg but will still withstand the toughest of environments. The unit is supplied with a P3 filter with an extraordinary filtration capacity. The battery, which have an operating capacity of 8 hours, can be charged separate from the motor unit, hence it can be utilised when working double shifts. The Eco Air is equipped with an Audio low flow alarm and indicates when the battery is running low or when the filter is blocked. The Buddy™ Air can be used together with Aristo® Tech.

Eco Air Complete (EU and UK) including air hose 0700 002 175

Eco Air

The Origo™ Air is a battery powered respiratory unit is designed to fit the Origo™ Tech, Globe Arc and Albatross welding helmets. The unit provides clean/filtered air to increase the comfort and safety for the welder. The Origo™ Air is delivered complete with an 8-hour battery, P3 filter, comfort pad, waist belt and an air hose with a Proban hose cover fitted. This unit is supplied with an intelligent charger, which ensures a prolonged life time of the battery, by reducing the risk of over charging. The Origo™ Air is equipped with a low flow alarm, which will give an audible signal when the filter is blocked or the battery power is running low. The complete system is comfortable, lightweight and durable.

Origo™ Air Complete (EU and UK) including air hose 0700 002 100

origo™ Air

AvailableÊ ÊendÊ ofÊ 2011

AvailableÊ ÊendÊ ofÊ 2011

Page 42: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment

29

1 Air channel 0700 002 002 2 Screws for air channel 0700 002 028 3 Head seal Aristo® Tech 0700 002 160 4 Air hose 0468 127 011 4 Air hose 1m 0700 002 055 4 Air hose heavy duty 0700 002 081 6 Comfort pad Aristo® Air 0700 002 162 7 Aristo Air door 0700 002 166 8 P3 filter 0700 002 024 8 P2 filter 0700 002 018 8 P2 filter carbon 0700 002 041 9 Pre filter Pk 5 0700 002 023 9 Carbon pre filter Pk 10 0700 002 040 10 Intelligent charger Aristo® Air 0700 002 165 11 Waist belt 0700 002 027 12 Holder for air channel 0700 002 029 13 Battery Aristo® Air 0700 002 164 16 Proban hose cover 0349 501 071 * Aristo Air motor unit 0700 002 164

Spares for Aristo® Tech Air (Fig 5)

Spares for Aristo® Air Fig 5

Page 43: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

30

Respiratory Equipment

1 Head seal New-Tech 0700 002 048 2 Air channel 0700 002 050 3 Screws for air channel 0700 002 028 4 Face seal New-Tech 0700 002 049 5 Air hose New-Tech 0468 127 011 5 Air hose New-Tech 1m 0700 002 055 5 Air hose New-Tech - Heavy Duty 0700 002 081 5 Air hose Albatross 0700 002 032 7 Comfort pad standard 0700 002 021 7 Comfort pad large 0700 002 022 8 Eco Air motor unit 0700 002 042 9 P3 filter 0700 002 024 9 P2 filter 0700 002 018 9 P2 filter carbon 0700 002 041 10 Pre filter Pk 5 0700 002 023

10 Carbon Pre filter Pk 10 0700 002 040 11 Battery small Eco Air - 360g 0700 002 01312 Battery charger small 2 Pin (EU) 0700 002 020 12 Battery charger small 3 Pin (UK) 0700 002 044 12 Battery charger large 2 Pin (EU) 0700 002 031 12 Battery charger large 3 Pin (UK) 0700 002 04512 Intelligent charger 0701 416 20312 Five way intelligent charger 0701 416 13613 Waist belt 0700 002 027 14 Holder for air channel 0700 002 029 15 Battery large Eco Air - 580g 0700 002 01416 Eco Air complete (EU) 0700 002 926 16 Eco Air complete (UK) 0700 002 954 17 Proban hose cover 0349 501 071 Back plate (not shown) 0701 502 396

Spares for Eco Air (Fig 6)

Spares for Eco Air Fig 6 (CoMPATIBLE MoUNTING KIT)

ESAB offers a compatible mounting kit for the New-Tech™. This allows the helmet to be adapted to either the Eco Air, Aristo® Air.

Mounting kit New-Tech™ 0700 002 047(Face seal, velcro, head seal, air channel)

Page 44: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

31

Spares for origo Air (Fig 7)

Spares for Origo Air Fig 7

Origo™ Air

1

2

3

56

7

8

9

4

1 Face seal 0700 002 101 2 Air duct including head gear 0700 002 102 3 Air hose 0700 002 103 4 Proban hose cover 0700 002 104 5 Motor unit 0700 002 105 6 Filter 0700 002 106 7 Charger adapter 0700 002 107 8 Battery 0700 002 108 9 Waist belt 0700 002 109 * Sweat band Origo Tech x 2Pc 0700 000 274

* Not shown

Respiratory Equipment

Page 45: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment

The waist mounted regulator is pre-set to reduce the air from high to low pressure and has integral low flow warning alarm. The unit is encased to protect the regulator. The regulator is delivered with an air supply connector which connects the air hose to the regulator. The unit is supplied complete with waist belt. The maximum input working pressure is 10 bar (145 psi).

ESAB Air CA regulator & air supply connector 0349 501 072Airline 10 meters 0701 416 188

ESAB Air CA

The filter system consists of three filtration units which will remove liquids, solid contaminants, oil vapour and odours from the compressed air supply and provides clean breathing air to the operators. The filtration bank should be used when a clean air supply is not available. The units are fitted with 1/4” (6,4mm) input hose tail adapter, a 0,5-10 bar adjustable regulator, twin output ‘quick-snap’ style hose connectors for 1 or 2 operators and a gauge as a guide to output pressure. The filtration bank can be supplied for wall mounting or on a portable frame.

Filtration bank framed 0701 416 183Filtration bank wall mounted 0701 416 184

Spares filters for Filtration Bank 1. Prefilter 0701 416 1852. Caolescing filter 0701 416 1863. Charcoal filter 0701 416 187

ESAB Compressed Air Filtration Bank

ESAB Compressed Air Systems (CA)

32

1 23

Page 46: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment

The ESAB Filtair series has been developed to improve the comfort of disposable respirators whilst maintaining an excellent face fit. Colour coding the range makes identification simple when varying levels of protection may be required. The mesh shell supports the filter media and prevents collapse onto the face and the preformed nose bridge provides comfortable fit eliminating constant adjustment. The filters use the latest filter technology to promote low breathing resistance and are approved to EN149:2001 (meeting the 120mg load testing). The Filtair is available as a pre-moulded and a flat version. Depending on the protection level needed and the breathing resistance some models are equipped with a valve. All the masks are fitted with buckle fastening which also allows the wearer to adjust the straps accordingly.

Filtair Disposable Masks

33

Page 47: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment

This mask provide P2 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. Suitable to wear when sanding painted metals, powder coating and sanding cured resins.

ESAB Filtair Pro P2V ‘Blue’ Pk 10 0700 002 201

ESAB Filtair Pro 8020v

This mask provide P2 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. The carbon layer takes out bad odours. Suitable to wear during welding, brazing, soldering, painting (brush applied), gluing (brush applied) and polyester resins (hand mix).

ESAB Filtair Pro P2CV ‘Grey’ Pk 5 0700 002 202

ESAB Filtair Pro 8020Cv

This mask provide P3 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. Suitable to wear during molten metal handling, welding, machining, grinding, polishing and finishing.

ESAB Filtair Pro P3V ‘Orange’ Pk 5 0700 002 203

ESAB Filtair Pro 8030v

This mask provide P1 protection and is suitable to wear during general dusty duties.

ESAB Filtair Pro P1 ‘White’ Pk 20 0700 002 200

ESAB Filtair Pro 8010

34

Page 48: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment

This mask provide P2 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. Suitable to wear when sanding painted metals, powder coating and sanding cured resins.

ESAB Filtair Flat P2V ‘Blue’ Pk 20 0700 002 205

ESAB Filtair Flat A-2v

This mask provide P2 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. The carbon layer takes out bad odours. Suitable to wear during welding, brazing, soldering, painting (brush applied), gluing (brush applied) and polyester resins (hand mix).

ESAB Filtair Flat P2CV ‘Grey’ Pk 20 0700 002 206

ESAB Filtair Flat A-2Cv

This mask provide P3 protection and is equipped with a valve to reduce heat and moisture build up inside the respirator. Suitable to wear during molten metal handling, welding, machining, grinding, polishing and finishing.

ESAB Filtair Flat P3V ‘Orange’ Pk 20 0700 002 207

ESAB Filtair Flat A-3v

This mask provide P1 protection and is suitable to wear during general dusty duties.

ESAB Filtair Flat P1 ‘White’ Pk 20 0700 002 204

ESAB Filtair Flat A-1

35

Page 49: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Spectacles, Goggles & Visors

The clear lens is suitable when working indoors, providing general eye protection.

ESAB Pro Clear 0700 012 013

ESAB Pro Clear

ESAB Pro Safety Spectacles

These stylish spectacles are used for drilling, chipping and metalworking. They have a sporty style, soft to the touch, and have a lightweight wrap around, including a neck cord. They are extremely flexible and durable, and are available in four different lens configurations. All lens configurations provide protection against dangerous UV radiation. CE approved according to EN 166-F. There are 10 pairs packed per box.Not for grinding.

The smoked lens is suitable when working in strong ambient light.

ESAB Pro Smoked 0700 012 014

ESAB Pro Smoked

The Amber (yellow lens) enhances the light. This is suitable when the ambient light is not sufficient.

ESAB Pro Amber 0700 012 015

ESAB Pro Amber

The shade 5 spectacle provide protection not only against IR/UV light but also against the visible light during gas welding/cutting.

ESAB Pro Shade 5 0700 012 016

ESAB Pro Shade 5

36

Page 50: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Spectacles, Goggles & Visors

The clear lens is suitable when working indoors, providing general eye protection.

ESAB Eco Clear 0700 012 017

ESAB Eco Clear

ESAB Eco Safety Spectacles

These stylish spectacles are used for drilling, chipping and metalworking, they have a sporty style and are extremely lightweight. Available in three different lens configurations. All lens configurations provide

The smoked lens is suitable when working in strong ambient light.

ESAB Eco Smoked 0700 012 018

ESAB Eco Smoked

The Amber (yellow lens) enhances the light. This is suitable when the ambient light is not sufficient.

ESAB Eco Amber 0700 012 019

ESAB Eco Amber

37

Page 51: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Spectacles, Goggles & Visors

ESAB Visitor spectacle protects the eye from flying particles. The lenses are made of impact-resistant polycarbonate. The spectacles (frames & lenses) are certified to EN 166:2001.

ESAB Visitor Spectacle 0700 012 021

ESAB visitor Spectacle

The special injected frame offers supreme user comfort as well as durability. Expanded Visual field. Cross Vent technology keeps air flowing in and moisture out. Moulded 2mm poly carbonate lens provides great impact protection. These goggles meet ANSI Z87.1+ impact standard and is CE certified to EN166’S’.

ESAB Ski Goggle Clear 0700 012 027

ESAB Goggle Clear

The special injected frame offers supreme user comfort as well as durability. Expanded Visual field. Cross Vent technology keeps air flowing in and moisture out. Moulded 2mm poly carbonate lens provides great impact protection. These goggles meet ANSI Z87.1+ impact standard and is CE certified to EN166 and EN169.

ESAB Ski Goggle Shade 5 0700 012 026

ESAB Goggle Shade 5

Provides protection against liquid splashes, dusts and spatter.

ESAB Chemical Goggle 0700 012 025

ESAB Goggle

38

Page 52: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Spectacles, Goggles & Visors

ESAB Flip Front Goggle Round Shade 5

A strong lightweight brownguard featuring an adjustable head harness and clear polycarbonate screen.

Grinding Visor Complete 0700 012 020Replacement Visor Clear 0700 012 023

Grinding visor Complete

Protective goggle shade 5 for gas welding, brazing and gas cutting. The goggles are ventilated and have a flip-front mechanism. CE approved according EN 166/EN 175.

ESAB Flip Front Goggle, Shade 5 0700 012 022

39

Page 53: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

40

Welding Clothing

Clothing and Workwear

Whatever your welding clothing requirements, ESAB can offer you a high performance range of welding garments suitable for any welding environment. With a great choice of traditional leather or high specification, Phoenix FR® inherently flame retardant fabrics, ESAB’s product experts have developed a superior range of multi-risk garments to meet the demands of the welder.

New Phoenix FR®

ESAB is proud to introduce the very latest technology in inherent flame retardant garments. In many industries workers face a complex mix of safety hazards, yet most protective fabrics protect from one or two hazards only. For this reason, employers in the past have been forced to compromise on safety. Not any more.

ISO EN 11612 Flame Retardance

ISO EN 11611 level 1 and 2

EN 1149 - 3 – 5

EN 61482-1-2 2007 Flame

Retardant Welding specific clothing

Phoenix FR® is proven to protect from flame, weld spatter, heat and electric arc explosion. Its’ unique molecular structure means that the flame-resistant properties are inherent and therefore, permanent. This technology is the result of a four year development programme and ensures that all our Phoenix FR® range exceed the very latest ISO international standards.

Page 54: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

41

Welding Clothing

Page 55: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

42

Welding Clothing/Flame Resistant

Flame Resistant Welding Clothing

The ESAB Black & yellow Welders Jacket has been designed to give maximum performance, yet offer extreme comfort & durability. The Garment is made from high performance Phoenix-FR fabric which is inherently flame retardant. The coverall features adjustable sleeves, two top pockets and concealed Zip front. This garment is fully CE approved to EN ISO11612 FR, ISO 11611 Welding, EN1149-5 Anti Static & EN61488 Arc protection. Sizes Small to XX-Large.

ESAB FR Welding Jacket, S 0700 010 358ESAB FR Welding Jacket, M 0700 010 359ESAB FR Welding Jacket, L 0700 010 360ESAB FR Welding Jacket, XL 0700 010 361ESAB FR Welding Jacket, XXL 0700 010 362

FR Welding Jackets

The ESAB Black & yellow Welders trousers has been designed to give maximum performance, yet offer extreme comfort & durability and compliment the FR welding Jacket. The Garment is made from high performance Phoenix-FR fabric which is inherently flame retardant. The trousers features elasticated waist with Belt loops, two side access pockets and two back pockets. This garment is fully CE approved to EN ISO11612 FR, ISO 11611 Welding, EN1149-5 Anti Static & EN61488 Arc protection. Sizes Small to XX-Large.

ESAB FR Welding Trousers, S 0700 010 363ESAB FR Welding Trousers, M 0700 010 364ESAB FR Welding Trousers, L 0700 010 365ESAB FR Welding Trousers, XL 0700 010 366ESAB FR Welding Trousers, XXL 0700 010 367

FR Welding Trousers

The ESAB FR Welders overall has been designed for the maximum comfort and safety. The garment is made from a flame retardant inherent material. The coverall features a elasticated waist for better comfort and fit, adjustable sleeves and legs, and a covered/protected zipper. The neck is protected by a stand up collar, and knee pads can be fitted. Conforms to EN ISO11612 FR, ISO11611 Welding, EN1149-5 Anti Static. Sizes Small to XX-Large.

ESAB Welders Coverall, S 0700 010 328ESAB Welders Coverall, M 0700 010 329ESAB Welders Coverall, L 0700 010 330ESAB Welders Coverall, XL 0700 010 331ESAB Welders Coverall, XXL 0700 010 332

ESAB FR Coverall

Page 56: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

43

Welding Clothing/Flame Resistant

ESAB Phoenix-FR Black Flame retardant, anti-static, welders Fleece. Featuring, Zip front with contrasting plackett, two side pockets and one internal zip. Conforms to EN ISO11612 FR, ISO11611 Welding, EN1149-5 Anti Static. Sizes Small to XX-Large.

ESAB FR Fleece, S 0700 010 368ESAB FR Fleece, M 0700 010 369ESAB FR Fleece, L 0700 010 370ESAB FR Fleece, XL 0700 010 371ESAB FR Fleece, XXL 0700 010 372

ESAB FR Fleece

ESAB Phoenix-FR Black Flame retardant, anti static, welders Jersey polo Shirt. Featuring, Zip front with contrasting plackett, Unique ESAB Contrasting ribbed Collar. Conforms to EN ISO11612 FR, ISO11611 Welding, EN1149-5 Anti Static. Sizes Small to XX-Large.

ESAB FR Jersey, S 0700 010 373ESAB FR Jersey, M 0700 010 374ESAB FR Jersey, L 0700 010 375ESAB FR Jersey, XL 0700 010 376ESAB FR Jersey, XXL 0700 010 377

ESAB FR Jersey

ESAB Phoenix-FR Flame retardant, anti static, welders Jumper. Conforms to EN ISO11612 FR, ISO11611 Welding, EN1149-5 Anti Static & EN61488 Arc protection. Sizes Small to XX-Large.

ESAB FR Jumper, S 0700 010 378ESAB FR Jumper, M 0700 010 379ESAB FR Jumper, L 0700 010 380ESAB FR Jumper, XL 0700 010 381ESAB FR Jumper, XXL 0700 010 382

ESAB FR Jumper

ESAB Overall optional knee pads.

ESAB Overall Knee Pads 0700 010 352

ESAB overall Knee Pads

Page 57: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

44

Welding Clothing/Leather

The ESAB Proban/leather jackets are designed for maximum comfort and safety. The sleeves and shoulders are made in durable grade A leather to withstand the exposure to welding spatter. The front and back is made from flame retardant Proban material. The garment feature concealed inner pockets, adjustable sleeves and a stand up collar. Kevlar stitched.

ESAB Proban/Leather welding jacket, M 0700 010 301ESAB Proban/Leather welding jacket, L 0700 010 302ESAB Proban/Leather welding jacket, XL 0700 010 303ESAB Proban/Leather welding jacket, XXL 0700 010 304

Welding Jackets

The ESAB Proban/Leather trousers are designed for maximum comfort and safety. The front of the legs are reinforced with leather to withstand the spatter and welding sparks. Kevlar stitched.

ESAB Proban/Leather welding trousers, M 0700 010 333ESAB Proban/Leather welding trousers, L 0700 010 334ESAB Proban/Leather welding trousers, XL 0700 010 335ESAB Proban/Leather welding trousers, XXL 0700 010 336

Welding Trousers

Leather Workwear

ESAB’s Leather protective range is helping to redefine welder protection, with garments that provide optimal fit, comfort, performance, style & durability, resulting in safer, more productive working environments.

The products include jackets, trousers, sleeves, aprons & gaiters, all ideal for every welding application for the professional welder.

ISO EN 11612

Flame Retardance

ISO EN 11611

level 1 and 2

Page 58: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

45

Welding Clothing/Leather

Chrome leather sleeves with a total length of 47cm. Equipped with elasticated cuff and velcro arm fastening.

Welding Sleeve 0000 595 039

Welding Sleeve

Leather gaiters to protect the footwear during welding. The gaiters are fastened using velcro.

Leather Gaiters 0700 010 008

Leather Gaiters

ESAB Welding jackets are made of high quality leather. The front is reinforced in order to withstand mechanical and thermal stress. The jacket is stitched with Kevlar thread, features stand up collar and inside pocket with adjustable wrists.

Welding Jacket, M 0700 010 266Welding Jacket, L 0700 010 002Welding Jacket, XL 0700 010 003Welding Jacket, XXL 0700 010 267

Welding Jacket

Tan side split leather welders’ waist apron with Kevlar stitching and buckle attachment. Size 60cm x 70cm.

ESAB Apron 0700 010 007

Welding Aprons

Page 59: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Coveralls

100% cotton, flame resistant, 2 zipped chest pockets, concealed stud and zip. CE approved to EN531 (A, B2, C1) and EN470-1.

Flame Retardant Hi Vis coveralls 36” (92cm) Orange 0701 502 334Flame Retardant Hi Vis coveralls 38” (97cm) Orange 0701 502 335Flame Retardant Hi Vis coveralls 40” (102cm) Orange 0701 502 336Flame Retardant Hi Vis coveralls 42” (107cm) Orange 0701 502 337Flame Retardant Hi Vis coveralls 44” (112cm) Orange 0701 502 338Flame Retardant Hi Vis coveralls 46” (117cm) Orange 0701 502 339Flame Retardant Hi Vis coveralls 48” (122cm) Orange 0701 502 340Flame Retardant Hi Vis coveralls 50” (127cm) Orange 0701 502 341Flame Retardant Hi Vis coveralls 52” (132cm) Orange 0701 502 342Flame Retardant Hi Vis coveralls 54” (137cm) Orange 0701 502 343Flame Retardant Hi Vis coveralls 56” (142cm) Orange 0701 502 344Flame Retardant Hi Vis coveralls 58” (147cm) Orange 0701 502 373

Flame Retardant Hi visibility Coverall

The ESAB fire retardant 100% cotton coverall comes with 2 chest pockets a ruler pocket and has concealed stud fastenings. Conforms to EN 531, EN 470-1 & EN 533.

ESAB Black coverall, M 0700 010 038ESAB Black coverall, L 0700 010 039ESAB Black coverall, XL 0700 010 040ESAB Black coverall, XXL 0700 010 041

Welding Coveralls (Flame Resistant)

46

The skull cap is a 100% cotton light weight and comfortable form of additional comfort when worn underneath a welding helmet. Preventing less friction and irritation from the head gear on sensitive parts of the brow.

Skull Cap 0700 010 351

Skull Cap

Page 60: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Head Protection

Flame resistant head protection which cover not only the head but also the neck, nape and shoulders.

Proban Hood 0000 593 269

Proban Hood

These two pieces of leather material, offer protection to the head, neck and chest area. They are ideal for welding in areas where all round protection is needed, to protect against sparks, spatter and any other air born particles from the welding environment. They are split into two pieces. One piece is covering the chest area, whilst the other piece is covering the head and neck area at the back of the helmet. They can easily be adapted to the Origo Tech, New-Tech & Aristo Tech welding helmets.

Leather Chest Protection 0700 000 062Leather Head/Neck Protection 0700 000 063

Leather Head and Chest Protection

The balaclava is worn underneath the welding helmet to give you full head protection when working in a cold environment. The balaclava is flame resistant, 100% zirpro treated wool, 385 gr/m2 EN531.

Balaclava 0700 010 269

Balaclava

The insulated helmet liner is worn underneath the welding helmet to offer protection from the elements when working in a cold environment.

Insulated Helmet Liner 0000 904 378

Insulated Helmet Liner

47

Page 61: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Gloves

48

Glove EN standards and materials

CE labelling – Risk Class – Categorising Personal Protective Equipment (PPE), EU Directive 89/686/EF.

The intention of this directive is to ensure that all PPE sold in Europe corresponds to the relevant EN standards. This will secure a generally identical quality standard throughout Europe. Products that meet the requirements in one or more standards must be branded with the CE logo.

Category 1, Simple Design: These products protect against minimal risks and can only be used where any risk increases gradually and can be easily identified by the user in advance. The CE labelling consists of only the CE mark.

Category 2, Intermediate Design: The products are tested and technically approved by an authorised test institute. The institute also examines the manufacturers technical documentation to establish that the product is produced in accordance with the relevant EN standard. The CE labelling consists of the CE mark, the test institute approval number, year of first time approval, pictograms and test performance.

EN 420 (Cat 1) defines the general requirements for most protective gloves as:

• Product and packaging information and labelling

• Care and maintenance

• Size

• The product itself must present no risk to users (requirements concerning chromium content and pH)

• Storage of the products

EN 388 – Protection against

mechanical damage Character

a) Abrasion resistance 0 – 4

b) Blade Cut resistance 0 – 4

c) Tear resistance 0 – 4

d) Puncture resistance 0 – 4

EN 12477 – Welding gloves

Thermal resistance Character

a) Burning behaviour 0 – 4

b) Contact heat 0 – 4

c) Convective heat 0 – 4

d) Small splashes of molten metal 0 – 4

Page 62: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Gloves

49

Leather quality Finding the right quality leather to meet the exacting requirements of the welding professional requires experience. ESAB have extensive knowledge and experience with tanning and finishing – important processes that determine the final quality of the leather. It is these processes that give the leather its qualities in relation to strength, softness and flexibility.

The upper skin is called “grain” and the inner skin is called “split” Grain leather is soft, durable, wear resistant and tolerates some water. It can also withstand heat up to 80°C. Split leather is porous and will therefore absorb humidity more easily than grain leather. Its naturally rough surface gives good grip properties. The thickness depends on how the skin is cut and whether it is cut in one or two layers. Without special treatment, split leather can resist heat up to 100°C.

ox Leather A wear resistant grain leather which tolerates water. The leather is often thick, which in addition to its wear resistant properties makes it suitable for use in working gloves that must tolerate rough use. It also gives good protection against heat.

Pig LeatherThe surface of the leather is relatively porous which makes the breathability of the glove better than most other leathers. Pig leather is also softer.

Goat LeatherGoat leather is the longest lasting leather. Natural lanolin content makes goat leather extremely flexible. It also has very good wear resistance. Strength and flexibility make this leather very suitable for work where good finger feel and dexterity is required.

Test Criteria Standard Minimum Maximum performance performance required achievable

A B

Abrasion resistance EN 388 2 1 4

Blade cut resistance EN 388 1 1 5

Tear resistance EN 388 2 1 4

Puncture resistance EN 388 2 1 4

Burning behaviour EN 407 3 2 4

Contact heat EN 407 1 1 4

Convective heat EN 407 2 n/a 4

Small splashes of molten metal EN 407 3 2 4

Dexterity EN 420 1 4 5

Page 63: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Gloves

50

Welding Gloves MIG/MAG/MMA

All ESAB and Murex gloves are CE approved. The heavy duty welding gauntlets and riggers have been tested and certified by a third party notifying body. The glove is then a Cat. 2 product.

Test against mechanical stress such as abrasion, cut, tear and puncture.

Test for thermal performance such as exposure to an open flame, contact heat, convective heat, radiant heat, small and large splashes of molten metal.

These superior new welding gloves from ESAB offer a whole new approach to fit, form and function. Ergonomically designed to fit the natural curve of the hand, offering increased quality & comfort to the wearer. The MIG glove is made from heavy & fine cut leather, and is lined from hand to cuff. With the curved design the glove fits the hand perfectly, and also has a flexible wrist area which reduces friction. With welted seams, kevlar stitching & reinforced thumb, the glove is very strong and offers a very high level of protection to the wearer. EN 12477 and EN 388 Cat 2.

ESAB Curved MIG, L 0700 005 043ESAB Curved MIG, XL 0700 005 040

ESAB Curved MIG Glove

A high quality 1.2/1.3mm thick side split cow leather welding gauntlet with Wing thumb, fully Kevlar stitching, fully welted. The glove is fully lined with FR cotton to cuff and full fleece jersey liner to palm. This glove offers the welder durability, longevity and total comfort. CE approved to EN12477 and EN388 Cat 2.

Heavy Duty Basic 0700 005 007

Heavy Duty Basic

Page 64: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Gloves

51

Our most popular product, made from high performance cow split leather, high dexterity palm and fingers with wing thumb, fully welted fingers and Kevlar stitched. Ideal for areas of high mechanical stress. CE approved to EN12477 and EN388 Cat 2.

Heavy Duty Black 0467 222 007

Heavy Duty Black

A high quality welding gauntlet made from both cow split and grain leather. The grain leather back offers excellent heat properties while the split leather offers excellent dexterity, durability and comfort. Features fully reinforced three fold thumb, fully welted, Kevlar stitched with grain back. Fully lined inner with FR cotton to cuff and full Jersey lining to palm. CE approved to EN12477 & EN388 Cat2.

Heavy Duty EXL, L 0700 005 009Heavy Duty EXL, XL 0700 005 029

Heavy Duty EXL

A Heavy duty durable yet flexible welding gauntlet. Made from 1.3mm side split cow leather which is fully heat resistant and hard wearing. Features reinforced thumb, fully Kevlar stitched and welted with additional vein patch for added protection. The glove is fully lined with FR cotton to the cuff and fleece jersey liner to the palm. CE approved to EN12477 and EN388 Cat 2.

Heavy Duty Regular 0700 005 008

Heavy Duty Regular

Page 65: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Gloves

52

ESAB’s entry level welders gauntlet, made from cow split leather with a cotton FR lining. Fully welted with a wing thumb for added comfort. CE approved to EN12477 & EN388.

Red Gauntlet 0701 380 498

Red Gauntlet

These superior new welding gloves from ESAB offer a whole new approach to fit, form and function. Ergonomically designed to fit the natural curve of the hand, offering increased quality & comfort to the wearer. The TIG glove is made from thin high quality leather, with improved fit for higher dexterity. The glove is highly durable, with welted seams & kevlar stitching. The glove is also extremely light weight, which increases the comfort to the wearer.

ESAB Curved TIG Gauntlet L 0700 005 041ESAB Curved TIG Gauntlet XL 0700 005 042

ESAB Curved TIG Glove

Welding Gloves TIG

A Hardwearing dexterous 1.2mm cow split leather welding gauntlet with reinforced 1.3mm leather patch to the palm offering the welder a hard wearing product to meet the toughest of industrial processes. Features straight thumb, with reinforced overlay, fully welted, fully lined with FR cotton liner to cuff and fleece jersey lining to palm. CE approved to EN12477 and EN388 Cat 2.

Superior Gauntlet Reinforced 0701 415 615

Murex Superior Gauntlet

Page 66: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Gloves

53

Esab exclusive Tig welding gauntlet made from high quality sheepskin with full Kevlar stitching. Features gun cut straight thumb, cow split 13cm cuff, wraparound 1st finger for increased dexterity, extremely comfortable, dexterous and durable. CE approved to EN12477 & EN388 Cat 2.

TIG SuperSoft 0700 005 006

TIG SuperSoft

A high quality Tig gauntlet made from selected cow hide, features wing thumb with reinforcement, 13cm split leather cuff, vein patch and with the addition of a jersey lightweight liner to the palm. CE approved to EN12477 & EN388 Cat 2.

TIG Professional 0701 415 963

TIG Professional

A unique ultra thin Goat split leather welding glove, suitable for all Tig applications. Features a reinforced straight thumb, wraparound first finger, vein patch and 13cm extended cuff. CE approved to EN12477 & EN388 Cat 2.

TIG Soft 0700 005 005

TIG Soft

A lightweight durable traditional Tig welders gauntlet up graded to EN12477 & EN388 Cat 2.

TIG Basic 0700 653 532

TIG Basic

Page 67: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

54

Welding Gloves

Welding Gloves Heat Resistant

Woven Kevlar Aluminised Welders hand shield for use in conjunction with welding gauntlets, to give added protection from radiant heat and general heat stress. Aluminised Kevlar is bonded and Stitched onto a 1.2mm cow split leather which is elasticated to fit all hand sizes.

Aluminised Hand Shield 0700 010 009

Aluminised Hand Shield

A high temperature addition to the range. Featuring unique aluminised woven Kevlar back capable of withstanding a radiant heat of up to 1000ºC with a heavy duty 1.3mm ceramic fibre supported leather palm capable of Contact palm heat up to 250ºC. The glove features wing thumb, fully welted seams, Kevlar stitched with a heavy duty FR drill cotton liner which features a Thermolate treatment to the palm. The aluminium reflects all thermal radiation away from the user. CE approved to EN12477 & EN388 Cat 2.

Heavy Duty Aluminium 250ºC 0700 005 010

Heavy Duty Aluminium 250ºC

An ultra high temperature 500°C welding gauntlet featuring: unique aluminised woven Kevlar back capable of withstanding 1000°C, with a heavy duty 1.3mm ceramic fibre supported leather palm capable of Contact heat up to 500°C. The glove features wing thumb, fully welted seams, full Kevlar stitching with a heavy duty cotton jersey liner which features a shearwater treatment to the palm. The aluminium reflects all thermal radiation away from the user. CE approved to EN12477 & EN388 Cat 2.

Heavy Duty Aluminium 500ºC 0700 005 046

Heavy Duty Aluminium 500ºC

A revolutionary new product which incorporates high technology woven ceramic fibre to the back of the Aluminised Kevlar Gauntlet, which offers protection against 1500°C radiant heat. This is incorporated into a high grade 1.3mm side split leather palm with full Thermolate felt offering 120°C contact heat protection to the palm. The glove is fully lined with jersey palm, offers a wing thumb, fully welted stitching and full Kevlar stitching. CE approved to EN12477 & En388 Cat 2.

Heavy Duty Aluminium 1500ºC 0700 005 045

Heavy Duty Aluminium 1500°C

Page 68: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

55

A durable, hardwearing rigger style work glove made from high quality cow side split leather, featuring wing thumb, fully welted seams, vein patch, 6cm rubberised cotton cuff with finger tip protection and knuckle strap. Fully jersey lined for added comfort. CE approved to EN388 Cat 2.

Heavy Duty Worker 0700 005 011

ESAB Heavy Duty Worker

A hardwearing work glove made from 1.2mm cow split leather. Featuring wing thumb, welted seams, vein patch, 5.5cm rubberised cotton cuff with finger tip protection and knuckle strap. Fully jersey lined for added comfort. CE approved to EN388 Cat 2.

Superior Rigger 0701 415 613

Superior Rigger

Welding Gloves

Welding Gloves General Handling

Page 69: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety Footwear

56

Offers protection according to S3, and it prevents weld spatter from falling into the shoe. The special microfibre soft lining makes it very comfortable to wear. The boot is water and oil resistant and the seam is reinforced with rivets for maximum durability. The front is folded and fastened with velcro to give a flat and protected upper. The dual density sole offers a soft upper part with front and back ‘bumpers’ and arch support, whilst the part in direct contact with the ground offers extremely high slip resistance. The shoe is equipped with shock absorption and the TF system to prevent ankle spraining risks, also the sole is heat resistant up to 180°C. They have an elasticated tongue for wide fitting feet and high slip resistant soles.

ESAB ankle boot, size 6 1/2 (40) 0700 010 188ESAB ankle boot, size 7 (41) 0700 010 189ESAB ankle boot, size 8 (42) 0700 010 190ESAB ankle boot, size 9 (43) 0700 010 191ESAB ankle boot, size 10 (44) 0700 010 192ESAB ankle boot, size 101/2 (45) 0700 010 193ESAB ankle boot, size 11 (46) 0700 010 219

ESAB Safety Ankle Boot

Offers protection according to S3 and the high upper gives full protection to the shin and prevents weld spatter from falling into the boot. The boot is equipped with leather pull loops at the top, making the boot easy to slip on. The boot is water and oil resistant and the seam is reinforced with rivets for maximum durability. The dual density sole offers a soft upper part with front and back ‘bumpers’ and arch support, whilst the part in direct contact with the ground offers extremely high slip resistance. The shoe is equipped with shock absorption and the TF system to prevent ankle spraining risks, also the sole is heat resistant up to 180°C.

ESAB rigger boot, size 6 1/2 (40) 0700 010 194ESAB rigger boot, size 7 (41) 0700 010 195ESAB rigger boot, size 8 (42) 0700 010 196ESAB rigger boot, size 9 (43) 0700 010 197ESAB rigger boot, size 10 (44) 0700 010 198ESAB rigger boot, size 10 1/2 (45) 0700 010 199ESAB rigger boot, size 11 (46) 0700 010 220ESAB rigger boot, size 12 (47) 0700 010 218

ESAB Safety Rigger Boot

S3 DD

S3 DD

All ESAB welding footwear is tested and approved according to EN 345 (safety footwear). Depending on application, footwear should always provide appropriate protection, EN 345 gives the following guidelines:

Safety shoes and boots – Key to symbols:

SB

S1

Safety Basic to EN345 200 joules toe protection

Safety Basic, antistatic, energy absorbing heel and closed back part

Safety Basic, antistatic, energy absorbing heel and water an oil resistant upper

Safety Basic, antistatic, energy absorbing heel, water resistant upper & steel midsole (anti penetration)

Antistatic

Dual Density

Steel Midsole

S3

DD

S2

Page 70: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

A range of quality tools and accessories for welding, cutting and general engineering applications offering everything from cable connectors to high specification electrode drying ovens. All our welding tools and accessories conform to the relevant EU legislation and standards.

Welding Tools and Accessories

Page 71: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

58

Welding Curtains

Three colour types are available and all three can be supplied as standard curtains, as well as strip curtains. The self-extinguishing material provides good protection from dangerous welding radiation. The curtains are fully seamed all around with 5cm wide seams, eyelets every 20cm on one width side, fitted on the right and the left side with a unique snap fastener system. This enables the user to connect the curtains with each other to create a curtain in the required width. The strip curtain allows access and enables material to be passed through, even when it is closed. All approved according to EN 1598, the European standard for welding curtains. The mounting rings come in a package of seven, which is enough to mount any of the curtains (standard as well as strip). Rings are included when ordering any of the curtains.

Welding curtain, dark red, 1.8 x 1.4m 0700 008 004Welding curtain, green transparent, 1.8 x 1.4m 0700 008 005Welding curtain, dark green (DIN 9), 1.8 x 1.4m 0700 008 006Welding strip curtain, dark red, 1.8 x 1.4m 0700 008 001Welding strip curtain, green transparent (DIN 6), 1.8 x 1.4m 0700 008 002Welding strip curtain, dark green (DIN 9), 1.8 x 1.4m 0700 008 003Mobile curtain, without wheel, dark red, 2 x 1.4m 0000 595 313Mobile curtain, without wheel, dark red, 2 x 2m 0000 595 315Mounting rings PVC 0700 008 007Mounting rings metal 0700 008 008

Welding Curtains

The wire reel is used when hanging the curtains. The wire is an 8 metre retractable stainless steel line. The unit is fixed to the wall and the line is tightened by using the specially designed torque control.

Wire reel for welding curtain 0700 008 018

Wire Reel for Welding Curtains

Page 72: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

59

Welding Curtains

ESAB versiFlex Frame for Welding Curtains

The new frame is made from jointed 32 and 22mm diameter steel tubing, with the joints to the leg portions being precision swaged for a sturdier joint. The ultra stable frame with a 700mm pitch for the feet width comes with rubber feet as standard. The offset legs enable two frames to be put together to make a tight 90 corner, or 4 frames together to make a cubicle.

As standard the versi Flex frame can make 3 width sizes: 1) 1000 as a frame to make a cutting barrier with a Welding Blanket. 2) 1400 as the standard welding curtain frame. 3) 2000 as wider version of the above.

options for the frame: 1) A set of 4 wheels, these simply screw into the sockets covered by the

standard rubber feet, turning the screen into a mobile. 2) A set of 2 outriggers, these are used to make sides to a standard

frame as a partial cubicle.

ESAB VersiFlex frame system 0700 008 020Set of outrigger arms (Set of 2) 0700 008 021Set of wheels (Set of 4) 0700 008 022

Page 73: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

60

Welding Blankets

Welding Blankets

The ESAB Welding blankets are produced using heat and flame resistant fabrics. The blankets provide excellent protection from grinding/welding sparks, slag and drops of molten metal. ESAB offer a wide range of blankets with different characteristics and in many different sizes. The blankets are colour coded.

When selecting the most suitable blanket for the application, the following factors should be considered:

Positioning of the blanket – All blanket are to be used on an incline of at least 15 degrees. Sparks hitting a blanket, which is positioned horizontally, will put extra stress on the material and a stronger and more heat resistant blanket should be used.

Work application – For light duty welding or grinding a thinner and less heat resistant blanket can be used. For heavy duty welding or cutting when the blanket is exposed to drops of molten metal then a more durable blanket should be used.

Page 74: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

61

Vermiculite coated silica welding blanket for medium duty applications. The silica fibre has a high melting temperature of 1600°C making it an excellent choice when drops of molten metal are a problem. The MD1300 blanket resists most acids. Max temp. = 1600°C, Weight = 600g, Colour = Bronze.

Welding Blanket 2-1900

2m x 0.9m 0700 008 0322m x 1.8m 0700 008 033

0.9m x 25m roll 0700 008 034

A carbon fibre felt welding blanket for heavy duty applications. This blanket offers extreme heat resistance of 1300°C. The 5180 is extremely light and it’s been designed for the automotive industry. Maximum temp. = 1300°C, Weight = 425g, Colour = Black.

Welding Blanket 5180

2m x 1m 0700 008 0352m x 2m 0700 008 036

1m x 25m roll 0700 008 037

Welding Blankets

2m x 1m 0700 008 0292m x 2m 0700 008 030

1m x 25m roll 0700 008 031

Fibreglass blanket with a specially formulated graphite and polyurethane solution witch provides high temperature and abrasion resistance. Suitable for medium to heavy duty industrial applications. Not suitable in very oily situations. Maximum temp. = 750°C, Weight = 1020g, Colour = Black.

Welding Blanket 906

P.U. coated fibreglass blanket for light sparks and spatter. Provides an excellent vertical screen to protect equipment and personnel from the spray of sparks. Maximum temp. = 550°C, Weight = 460g, Colour = Grey.

Welding Blanket 3001

2m x 1m 0700 008 0262m x 2m 0700 008 027

1m x 25m roll 0700 008 028

Special Duty Applications

Heavy Duty Applications

Medium Duty Applications

Light Duty Applications

Welding Blanket 1850

Heat treated fibreglass blanket for medium sparks and spatter. Best when used on an incline of at least 15 degrees. Very flexible. Maximum temp. = 550°C, Weight = 600g, Colour = Tan.

2m x 1m 0700 008 0232m x 2m 0700 008 024

1m x 25m roll 0700 008 025

Page 75: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Cables & Connectors

62

ESAB welding cable is of the highest quality and has top-class performance characteristics. This cable is approved in accordance with international standards and it is harmonised <HAR>. The cable is extremely resistant to light, chemicals and mechanical damage and it maintains its flexibility even when used in a cool environment.(Certified to HD 22.6)

Application picture

Conductor: Plain annealed copper stranded wiresInsulation: Flame retardent oil resistant Colour of sheath: BlackTest Voltage 50Hz: 1000VMaximum conductor operating temp: +85CLowest ambient temperature for fixed installation: -40CLowest installation temperature: -25CMaximum short-circuit conductor temperature: +250CPulling strength: The maximum static pulling strength may

not exceed 15N/mm²Minimum bending radius: 6 x D ; D – overall diameter of

cableFlame propagation: EN 60332-1-2:2004, IEC 60332-1-

2:2004

Designed for welding equipment and accessories; retain their high flexibilty even under influence of ozone, light, oxygen, protective glass, oil & petrol; resistant to flame propagation, suitable for use in dry and damp conditions, outdoors and indoors

Sectional area 16mm2 sold per 50m coilsSectional area 25mm2 sold per 50m coilsSectional area 35mm2 sold per 50m coilsSectional area 50mm2 sold per 50m coilsSectional area 70mm2 sold per 50m coilsSectional area 95mm2 sold per 50m coilsSectional area 120mm2 sold per 25m coils

0190 429 8010262 613 6010262 613 6020262 613 6060262 613 6030262 613 6040262 613 605

Tested and certified according to: HD 22.6

mm² mm mm mm kg/km Plain 60% 35% 20% 20°C 60°C 85°C

/km

16 0,21 2,0 8,9 197 1,21 133 144 167 16 1,24 1,430 1,560

25 0,21 2,0 10,1 281 0,780 182 203 244 25 0,795 0,920 0,998

35 0,21 2,0 11,4 379 0,554 233 268 324 35 0,565 0,654 0,709

50 0,21 2,2 13,2 530 0,386 303 356 439 50 0,393 0,455 0,493

70 0,21 2,4 15,3 735 0,272 307 400 578 70 0,277 0,321 0,348

95 0,21 2,6 17,5 955 0,206 478 582 734 95 0,2100 0,243 0,264

120 0.51 2,8 19,7 1213 0,161 564 692 880 120 0,164 0,190 0,206

Maximum

conductor

resistance at

temperature

20ºC

Maximum

diameter of

wires in

conductor

Nominal

cross

sectional

area of

conductor

HO1N2-D

Approximate

weight

Approximate

overall

diameter

Nominal

thickness of

insulation

D.C Voltage Drop Per 100 A per

10m of Cable at:

V

Nominal cross

sectional area

Cooper

conductor mm²

Load Carrying Capacity - 10

Minutes

ESAB welding cable is of the highest quality and has top-class performance characteristics. This cable is approved in accordance with international standards and it is harmonised <HAR>. The cable is extremely resistant to light, chemicals and mechanical damage and it maintains its flexibility even when used in a cool environment.(Certified to HD 22.6)

Application picture

Conductor: Plain annealed copper stranded wiresInsulation: Flame retardent oil resistant Colour of sheath: BlackTest Voltage 50Hz: 1000VMaximum conductor operating temp: +85CLowest ambient temperature for fixed installation: -40CLowest installation temperature: -25CMaximum short-circuit conductor temperature: +250CPulling strength: The maximum static pulling strength may

not exceed 15N/mm²Minimum bending radius: 6 x D ; D – overall diameter of

cableFlame propagation: EN 60332-1-2:2004, IEC 60332-1-

2:2004

Designed for welding equipment and accessories; retain their high flexibilty even under influence of ozone, light, oxygen, protective glass, oil & petrol; resistant to flame propagation, suitable for use in dry and damp conditions, outdoors and indoors

Sectional area 16mm2 sold per 50m coilsSectional area 25mm2 sold per 50m coilsSectional area 35mm2 sold per 50m coilsSectional area 50mm2 sold per 50m coilsSectional area 70mm2 sold per 50m coilsSectional area 95mm2 sold per 50m coilsSectional area 120mm2 sold per 25m coils

0190 429 8010262 613 6010262 613 6020262 613 6060262 613 6030262 613 6040262 613 605

Tested and certified according to: HD 22.6

mm² mm mm mm kg/km Plain 60% 35% 20% 20°C 60°C 85°C

/km

16 0,21 2,0 8,9 197 1,21 133 144 167 16 1,24 1,430 1,560

25 0,21 2,0 10,1 281 0,780 182 203 244 25 0,795 0,920 0,998

35 0,21 2,0 11,4 379 0,554 233 268 324 35 0,565 0,654 0,709

50 0,21 2,2 13,2 530 0,386 303 356 439 50 0,393 0,455 0,493

70 0,21 2,4 15,3 735 0,272 307 400 578 70 0,277 0,321 0,348

95 0,21 2,6 17,5 955 0,206 478 582 734 95 0,2100 0,243 0,264

120 0.51 2,8 19,7 1213 0,161 564 692 880 120 0,164 0,190 0,206

Maximum

conductor

resistance at

temperature

20ºC

Maximum

diameter of

wires in

conductor

Nominal

cross

sectional

area of

conductor

HO1N2-D

Approximate

weight

Approximate

overall

diameter

Nominal

thickness of

insulation

D.C Voltage Drop Per 100 A per

10m of Cable at:

V

Nominal cross

sectional area

Cooper

conductor mm²

Load Carrying Capacity - 10

Minutes

ESAB welding cable is of the highest quality and has top-class performance characteristics. This cable is approved in accordance with international standards and it is harmonised <HAR>. The cable is extremely resistant to light, chemicals and mechanical damage and it maintains its flexibility even when used in a cool environment.(Certified to HD 22.6)

Application picture

Conductor: Plain annealed copper stranded wiresInsulation: Flame retardent oil resistant Colour of sheath: BlackTest Voltage 50Hz: 1000VMaximum conductor operating temp: +85CLowest ambient temperature for fixed installation: -40CLowest installation temperature: -25CMaximum short-circuit conductor temperature: +250CPulling strength: The maximum static pulling strength may

not exceed 15N/mm²Minimum bending radius: 6 x D ; D – overall diameter of

cableFlame propagation: EN 60332-1-2:2004, IEC 60332-1-

2:2004

Designed for welding equipment and accessories; retain their high flexibilty even under influence of ozone, light, oxygen, protective glass, oil & petrol; resistant to flame propagation, suitable for use in dry and damp conditions, outdoors and indoors

Sectional area 16mm2 sold per 50m coilsSectional area 25mm2 sold per 50m coilsSectional area 35mm2 sold per 50m coilsSectional area 50mm2 sold per 50m coilsSectional area 70mm2 sold per 50m coilsSectional area 95mm2 sold per 50m coilsSectional area 120mm2 sold per 25m coils

0190 429 8010262 613 6010262 613 6020262 613 6060262 613 6030262 613 6040262 613 605

Tested and certified according to: HD 22.6

mm² mm mm mm kg/km Plain 60% 35% 20% 20°C 60°C 85°C

/km

16 0,21 2,0 8,9 197 1,21 133 144 167 16 1,24 1,430 1,560

25 0,21 2,0 10,1 281 0,780 182 203 244 25 0,795 0,920 0,998

35 0,21 2,0 11,4 379 0,554 233 268 324 35 0,565 0,654 0,709

50 0,21 2,2 13,2 530 0,386 303 356 439 50 0,393 0,455 0,493

70 0,21 2,4 15,3 735 0,272 307 400 578 70 0,277 0,321 0,348

95 0,21 2,6 17,5 955 0,206 478 582 734 95 0,2100 0,243 0,264

120 0.51 2,8 19,7 1213 0,161 564 692 880 120 0,164 0,190 0,206

Maximum

conductor

resistance at

temperature

20ºC

Maximum

diameter of

wires in

conductor

Nominal

cross

sectional

area of

conductor

HO1N2-D

Approximate

weight

Approximate

overall

diameter

Nominal

thickness of

insulation

D.C Voltage Drop Per 100 A per

10m of Cable at:

V

Nominal cross

sectional area

Cooper

conductor mm²

Load Carrying Capacity - 10

Minutes

Welding Cable <HAR> H01N2-D

ESAB welding cable is of the highest quality and has top-class performance characteristics. This cable is approved in accordance with international standards and it is harmonised <HAR>. The cable is extremely resistant to light, chemicals and mechanical damage and it maintains its flexibility even when used in a cool environment.(Certified to HD 22.6)

Application picture

Conductor: Plain annealed copper stranded wiresInsulation: Flame retardent oil resistant Colour of sheath: BlackTest Voltage 50Hz: 1000VMaximum conductor operating temp: +85CLowest ambient temperature for fixed installation: -40CLowest installation temperature: -25CMaximum short-circuit conductor temperature: +250CPulling strength: The maximum static pulling strength may

not exceed 15N/mm²Minimum bending radius: 6 x D ; D – overall diameter of

cableFlame propagation: EN 60332-1-2:2004, IEC 60332-1-

2:2004

Designed for welding equipment and accessories; retain their high flexibilty even under influence of ozone, light, oxygen, protective glass, oil & petrol; resistant to flame propagation, suitable for use in dry and damp conditions, outdoors and indoors

Sectional area 16mm2 sold per 50m coilsSectional area 25mm2 sold per 50m coilsSectional area 35mm2 sold per 50m coilsSectional area 50mm2 sold per 50m coilsSectional area 70mm2 sold per 50m coilsSectional area 95mm2 sold per 50m coilsSectional area 120mm2 sold per 25m coils

0190 429 8010262 613 6010262 613 6020262 613 6060262 613 6030262 613 6040262 613 605

Tested and certified according to: HD 22.6

mm² mm mm mm kg/km Plain 60% 35% 20% 20°C 60°C 85°C

/km

16 0,21 2,0 8,9 197 1,21 133 144 167 16 1,24 1,430 1,560

25 0,21 2,0 10,1 281 0,780 182 203 244 25 0,795 0,920 0,998

35 0,21 2,0 11,4 379 0,554 233 268 324 35 0,565 0,654 0,709

50 0,21 2,2 13,2 530 0,386 303 356 439 50 0,393 0,455 0,493

70 0,21 2,4 15,3 735 0,272 307 400 578 70 0,277 0,321 0,348

95 0,21 2,6 17,5 955 0,206 478 582 734 95 0,2100 0,243 0,264

120 0.51 2,8 19,7 1213 0,161 564 692 880 120 0,164 0,190 0,206

Maximum

conductor

resistance at

temperature

20ºC

Maximum

diameter of

wires in

conductor

Nominal

cross

sectional

area of

conductor

HO1N2-D

Approximate

weight

Approximate

overall

diameter

Nominal

thickness of

insulation

D.C Voltage Drop Per 100 A per

10m of Cable at:

V

Nominal cross

sectional area

Cooper

conductor mm²

Load Carrying Capacity - 10

Minutes

Page 76: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

CE-approved, fully insulated cable connections with neoprene rubber. Bayonet-type connection which locks firmly to provide safe and effective contact. The cable is fixed into a socket with two Allen screws.

OKC male 10-25mm2 ESAB 0160 360 880OKC male 35-50mm2 ESAB 0160 360 881OKC male 70-95mm2 ESAB 0160 360 882OKC male 120mm2 ESAB 0160 360 883OKC female 10-25mm2 ESAB 0160 361 880OKC female 35-50mm2 ESAB 0160 361 881OKC female 70-95mm2 ESAB 0160 361 882OKC female 120mm2 ESAB 0160 361 883OKC male 10-25mm Murex (Red) 0701 416 257OKC male 25-50mm Murex (Red) 0701 416 258OKC male 50-95mm Murex (Red) 0701 416 259OKC female 10-25mm Murex (Red) 0701 416 254OKC female 25-50mm Murex (Red) 0701 416 255OKC female 50-95mm Murex (Red) 0701 416 256OKC Adapter 25-50mm 0590 046 800

oKC Cable Connection

Fully insulated with neoprene rubber. Sturdy and robust with low contact resistance. The cable is fixed into a socket with two Allen screws. The two halves of the connection in a ZBK connection are identical and can therefore be interchanged in any order.

ZBK 25-35mm2 0265 902 482ZBK 50-70mm2 0265 902 481ZBK 95-120mm2 0265 902 480

ZBK Cable Connection

The contacts should be mounted on the front panel of the machine and come in three dimensions. The angle connection is supplied as OKC 50-95 male and female.

OKC machine contact for OKC 25 0160 362 880OKC machine contact for OKC 50/95 0160 362 881OKC machine contact for OKC 120 0160 362 882Type 1 Angle connection, 1 male, 2 female 0365 557 001Type 2 Angle connection, 2 male, 1 female 0365 558 001

oKC Machine Contacts & Angle Connection

These heavy-duty connectors feature the cone and bush design of cable connection. They have high quality black rubber boots with positive lock and seal. They will accept up to 70mm2 copper or aluminium cable.

CC17 Plug 0700 606 402CC18 Socket 0700 606 403

CC17/18 Connectors

Cables & Connectors

63

Page 77: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

An open head electrode holder, the Samson is the ‘classic’ electrode tong design of electrode holder, made of a glassfibre-reinforced plastic. All Samson electrode holders are fully insulated.

Samson 300, 300 A (60%) 0760 002 300Samson 400, 400 A (60%) 0760 002 400Samson 500, 500 A (60%) 0760 002 500

Electrode Holder Samson

A ‘screw type’ electrode holder with a fully insulated head and handle.

Handy 200, 200 A (35%) 0700 006 003Handy 300, 300 A (35%) 0700 006 016Handy 400, 400 A (35%) 0700 006 013

Eco Holder Handy

Electrode Holders

64

ESAB’s CE-approved screw-type electrode holder offers many advantages including:Excellent current transfer between electrode and holderTwo hole positions at 45 and 90 for welding in different positionsElectrode cable held in place by two Allen screwsAll electrode holders are fully insulated to provide maximum safety

ESAB 200, 200 A (35%) 0333 249 001ESAB 400, 400 A (35%) 0369 849 880ESAB 500, 500 A (35%) 0369 850 880

Electrode Holder ESAB 200, 400 and 500

A closed head electrode holder allowing the electrode to be fitted either horizontally or vertically. The electrode holder is made of glassfibre-reinforced plastic. All Optimus electrode holders are fully insulated.

Optimus 300, 400 A (35%) 0760 001 300Optimus 400, 500 A (35%) 0760 001 400Optimus 600, 600 A (35%) 0760 001 600

Electrode Holder optimus

Page 78: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

An open head electrode holder with a fully insulated head and handle.

Confort 200, 200 A (35%) 0700 006 004Confort 300, 300 A (35%) 0700 006 005Confort 400, 400 A (35%) 0700 006 015

Eco Holder Confort

A closed head electrode holder with a fully insulated head and handle.

Prima 200, 200 A (35%) 0700 006 006Prima 300, 300 A (35%) 0700 006 007Prima 400, 400 A (35%) 0700 006 014

Eco Holder Prima

This is a crocodile style electrode holder, which is made from black phenolic resin insulated jaws and black handle. The holder is fully insulated for extra safety and copper jaws for good contact.

400 A Handicool Electrode Holder 0700 605 376600 A Handicool Electrode Holder 0700 605 378

Murex Handicool

This is a twist grip, short stub electrode holder. All the electrode is available for use and the angle allows the hand to remain away from the weld pool. The handle is used to apply torque to the electrode clamp in the head.

Econ 405 Electrode Holder 0701 380 433Econ 605 Electrode Holder 0701 380 434

Murex Econ

Electrode Holders & Clamps

65

Page 79: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

This clamp is robustly constructed from substantial castings. The screw lever allows maximum compression to the workpiece. Suitable for up to 600 amps.

CC11 Screw Type Earth Clamp 0701 400 000

Return Clamp CC11

Magnetic earth clamps with strong gripping power that permits attachment to any ferrous object. These clamps provide a large contact area with less overheating thanks to fewer junctions.

Magnetic earth clamp 400 A (35%) 0000 500 415

Magnetic earth clamp 600 A (35%) 0000 500 416

Magnetic Earth Clamps

Return Clamps

66

The EG 600 is an extremely robust earth clamp made of brass. The welding cable is attached using a hexagonal socket screw and the clamp has a maximum opening of 50mm and a maximum capacity of 600 amperes. The JK3 is a C-clamp model, galvanised and with a maximum opening of 48mm and maximum capacity of 500 amperes.

EG 600, 600 A (35%) 0160 288 001JK3, 500 A (35%) 0000 103 588

Return Clamp EG 600 and JK3

An earth clamp that provides good contact with the work piece and is available in two sizes.

Eco clamp 250, 250 A (35%) 0700 006 001Eco clamp 400, 400 A (35%) 0700 006 002

Eco Clamps

The MK 150 is a fully galvanised earth clamp with a maximum opening of 50mm. The MP 200, MP 300 and MP 450 are robust earth clamps with strong gripping power for good contact. The maximum opening for the MP 200 is 50mm and 55mm and 60mm for the MP 300 and MP 450 respectively.

MK 150, 150 A (35%) 0682 103 801MP 200, 200 A (35%) 0367 558 880MP 300, 300 A (35%) 0682 103 803MP 450, 450 A (35%) 0000 419 450

MK 150, MP 200, MP 300 and MP450

Page 80: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

A good connection to the workpiece is needed to obtain optimal manual or automatic welding. For rotating workpieces, an earth connection with a rotatable earth coupling is the safest choice. A range of current couplings is available. To attach the coupling to the workpiece, special clamps are available. (Please see: Return clamps for rotating workpieces).

NKK 400 - max 400 A, (1.65kg) 0000 595 133NKK 600 - max 600 A, (2.2kg) 0700 004 007NKK 800 - max 800 A, (2.7kg) 0700 004 001NKK 1200 - max 1200 A, (4.0kg) 0700 004 002NKK 2000 - max 2000 A, (7.3kg) 0700 004 003

Rotatable Earth Couplings

The earth clamps K2 or PZ3 can be mounted directly on to the rotatable earth coupling to create a good contact between the work piece and the return cable. The return clamps can also be used together with the GA 800 to form a complete earth clamp that can handle high current welding on non-rotating work pieces.

GA 800 - handle connection for K2 0700 004 005

K2 - clamp head for NKK 800 or 1200 0700 004 004

PZ3 - pole clamp for NKK 2000 0700 004 006

Return Clamps for Rotating Workpieces

Couplings & Clamps for Rotating Workpieces

67

Page 81: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The ESAB Eco-Tech is a high performing anti spatter spray, which is completely safe, both for the welder and environment. The propellant is compressed air, hence it is completely none-combustible. The solvent free liquid should be applied in a thin layer before welding. The Eco-Tech is water based and does not contain anything that can interfere with painting, galvanising or any other after treatments.

ESAB Eco-Tech anti spatter 300 ml 0700 013 007ESAB Eco-Tech anti spatter 10 litre 0700 013 008ESAB Eco-Tech anti spatter 25 litre 0700 013 009Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB Eco-Tech Anti Spatter

Combines uncompromising efficiency with active environmental and health protection. The High-Tech spray effectively prevents spatter from sticking on the work piece. The High-Tech weld-protect air-spray is absolutely non-combustible, has no toxic classification, uses no harmful gases and is safe for the skin. The propellant is compressed air, it is solvent free and gives no indirect air pollution or contribution to the greenhouse effect. It is absolutely silicon-free and water-soluble.

High-Tech 400 ml 0760 025 500High-Tech 10 litre 0760 025 010High-Tech 25 litre 0760 025 025Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB High-Tech Anti Spatter

The ESAB Pre-Weld fluid is so much more than a traditional anti spatter. ESAB have managed to develop a product that has a much higher concentration of the active substance than any other product available. The product does not evaporate off the work piece, it gives extraordinary protection all the way from the very edge of the weld and out across the work piece. But still the product is completely safe, no dangerous/ harmful substances are included. The fluid is absolutely silicon free and water-soluble, there are no problems with painting or with any other after treatments. The spray can contains 600 ml of active fluid, no solvents. The fluid is kept in an aluminium bag inside the can. The pressure surrounding the bag forces the fluid out when the valve is opened. This allows the can to be sprayed at any angle and still allows you to get every drop of fluid from the can. Note that it is only active fluid that is released, this is what makes the product so efficient.

ESAB Pre-Weld anti spatter 600 ml 0700 013 013ESAB Pre-Weld anti spatter 10 litre 0700 013 014ESAB Pre-Weld anti spatter 25 litre 0700 013 015Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB Pre-Weld Anti Spatter

Anti Spatter

68

Page 82: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The ESAB Jig and Tool protection prolongs the lifetime of the welding shroud and contact tip as well as giving an extremely good protection to tools and jigs. The spray dries quickly and leaves a heat resistant layer (1300ºC) and it does not burn off. Hardly any spatter sticks to the surface and if it does, a gentle wipe with the glove will remove it.

ESAB Jig and Tool protection, 400 ml 0700 013 016

ESAB Jig and Tool Protection

The ESAB Spatter shield prolongs the lifetime of the welding shroud and contact tip. Apply the fluid by dipping the torch and let the fluid dry. The fluid creates a heat resistant layer that prevents spatter from sticking. The spatter shield should be applied 2-3 times per 8-hour shift to give protection. Unlike tip dip products, when using the ESAB spatter shield you will NOT experience any problems with porosity created by drops of anti spatter falling down into the weld.

ESAB Spatter shield, 250 ml 0700 013 017

ESAB Spatter Shield

Chemical Sundries & Indicators

Prevents spatter from sticking as it forms a heat-resistant coat. The hot gas nozzle on the welding torch should be dipped about 20-25mm into the paste for effective results. Odourless and contains no solvents, silicone or abrasive agents and is delivered in a 0.5kg metal can.

Clean Weld welding paste, net weight 0.5kg 0365 560 001

Clean Weld Welding Paste

The ESAB NDT testing should be used to identify cracks in a weld. The process consists of 6 steps and to perform the test a cleaner, a penetrant and a developer is required. The procedure should be as follows: 1. Use ESAB cleaner and wipe dry. 2. Spray ESAB Penetrant, leave for 15 min. 3. Wipe away the penetrant from the surface. 4. Use the cleaner in a dry cloth, wiping in one direction only. Wipe dry. 5. Shake and then spray on the developer, leave for 10 min then

see results. 6. Remove the developer and dye using the cleaner.

ESAB NDT Penetrant 300 ml Aerosol 0700 013 018ESAB NDT Developer 400 ml Aerosol 0700 013 019ESAB NDT Cleaner 300 ml Aerosol 0700 013 020

Non Destructive Testing Aerosols

69

Page 83: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The ESAB gas leak detector can be used on the gas hoses leading from the gas cylinders or on the regulators in order to detect a gas leakage. The product is sprayed on and in case of a leakage the liquid will create bubbles. The composition does NOT contain any aggressive substances.

ESAB Leak Detector Pistol Type, 500 ml 0700 013 021

ESAB Leak Detector

The ESAB mask spray should be applied to the cover lenses in a helmet to keep them mist free and clean. 300 ml.

Mask spray, 300 ml 0700 013 026

ESAB Mask Spray

The ESAB weld marker marks all metal, wood, plastic, glass and hard surfaces. Low chloride colour makes it safe for marking stainless steel. Do not roll tube. Dries in five minutes.

Weld marker, white 0700 013 003Metal marker, yellow 0701 415 418

Weld Marker

The weld marker kit consists of three differently coloured pens, red, green and black. The pens can be used on most types of material.

Weld marker kit 0700 013 004

Weld Marker Kit

Chemical Sundries & Indicators

70

Page 84: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

This high impact speed chipping hammer produces virtually no vibration in the hand as a result of a built-in balance system, which absorbs recoil and counteracts shaking. A range of chisels are available for the HCB, they all have a tungsten-carbide tip and offer a long service life. Narrow chisel: 15mm wide for normal de-slagging and cleaning. Wide chisel: 35mm wide for removing spatter and de-burring after gas cutting.

Chipping Hammer HCB 0193 305 001

Pneumatic Chipping Hammer HCB

1 Nut HCB 0156 626 0012 Front Housing HCB 0193 306 0044 Inpact Piston Compl. 0156 626 0047 Housing HCB 0156 626 0078 Spring HCB 0156 626 00810 Air Feed Valve 0193 306 01211 O-Ring HCB 0156 626 00912 Ring Valve HCB 0156 626 01013 O-Ring HCB 0156 626 01114 Locking Ring HCB 0156 626 01215 Balancing Piston HCB 0156 626 01316 Housing HCB 0156 626 01417 O-Ring HCB 0193 306 01418 Tube Compl HCB 0156 626 01519 Trigger HCB 0156 626 01620 Spring HCB 0156 626 01721 O-Ring HCB 0156 626 01823 O-Ring HCB 0156 626 01924 Valve Piston 0156 626 02025 O-Ring HCB 0156 626 021

26 Ball Retainer 0156 626 02227 Cover HCB 0156 626 02328 Washer HCB 0156 626 02429 Securing Ring HCB 0156 626 02531 Nipple HCB 0156 626 02732 Sleeve HCB 0156 626 02833 O-Ring HCB 0156 626 02935 Valveball HCB 0156 626 03136 Screw HCB 0156 626 03237, 30 Spring HCB 0156 626 02638 O-Ring HCB 0156 626 03339 Chisel 15 x 100mm 0156 627 00139 Chisel 35 x 100mm 0156 627 00239 Chisel 15 x 200mm 0156 627 00639 Chisel 15 x 300mm 0156 627 00740 Clamp Ring HCB 0156 626 03441 Sound-damping chisel 0156 627 004* Chisel extension 0156 627 005* Stopscrew HCB 0156 626 030

Spares for Pneumatic Chipping Hammer HCB (Fig 8)

Spares for Pneumatic Chipping Hammer HCB Fig 8

* Not shown

Chipping Hammers

71

Page 85: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The SH2 chipping hammer is made of special high-quality steel, and has a user-friendly handle. The SH3 is a small hammer with a chisel and tip and steel handle with a plastic grip.

Chipping Hammer SH2 0000 663 000Chipping Hammer SH3 0683 200 001

Chipping Hammer SH2 and SH3

High quality tempered head and wooden handle. Chisel and point ends.

Martellina Wood 0000 915 051Wooden Chipping Hammer TH/5 0701 380 106

Wooden Chipping Hammers

To measure the A dimension of fillet welds. Two measurement areas: max. 7mm and max. 15mm. Complete with a leather pocket. Delivered with calibration certificate.

Fillet Gauge KL-1 Laser 0000 139 931

Fillet Gauge KL-1 Laser

To measure the A dimension of a fillet welds, the leg (small side of a right-angled triangle) and weld reinforcement height. Complete with leather pocket. Delivered with calibration certificate.

Fillet Gauge KL-2 Laser 0000 139 932

Fillet Gauge KL-2 Laser

Chipping Hammers & Fillet Gauges

To measure the a-dimension on measurement area 3-11mm, K-dimension and 50° and 60° groove angle. Also on fast measurement 4, 5, 6 and 7mm a-dimension and gaps of 1.5, 2 and 3.5mm.

Filarc Fillet Gauge 0000 593 268

Filarc Fillet Gauge

72

SH2

SH3

Page 86: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

To measure the a-dimension of fillet welds and to measure the butted joint weld reinforcement height. Equipped with three scales. Measurement area 0-15mm and measurement sharpness +0,1mm.

INOX Fillet Gauge 0000 593 720

INoX Fillet Gauge

Pliers specially designed for MIG/MAG welding. Removes spatter from the nozzle, cuts the wire and the tool makes it easy to remove the contact tip and gas shroud.

Universal Tool 0000 134 716Universal Tool Mini 0000 139 054

Universal Tool

Fast effective cutting of welding wire and removal of burnt wire. Removes spatter from gas and contact nozzle and can be used for attaching and removing of contact, intermediate and gas nozzles.

Fix 1 12-15mm 0760 022 100Fix 2 15-18mm 0760 022 200

Fix Pliers

Stainless steel inspection mirror for inspecting welds.

Inspection mirror 500mm, with magnetic base 0000 595 319

Inspection Mirrors

Fillet Gauges & Small Tools

73

Page 87: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The MIG/MAG gun holder is a simple and practical device for the convenient holding of the MIG/MAG gun when not in use. It is equipped with a magnetic foot for stability and is suitable for use with most MIG/MAG welding guns.

MIG/MAG Gun Holder 0760 022 300

MIG/MAG Gun Holder

The TIG torch holder is a simple and practical device for the convenient holding of the TIG torch when not in use. It is equipped with a magnetic foot for stability and is suitable for use with most TIG torches.

TIG Torch Holder 0760 022 400

TIG Torch Holder

The powerful magnets keep the work piece in place when welding or soldering plates together at angles. The large model can support weights up to 36kg whilst the small one can support up to 20kg.

Magnetic Position Holder small (120 x 80mm) 0700 014 015Magnetic Position Holder large (160 x 100mm) 0700 014 016

Magnetic Position Holders

Small Tools

Prolongs the life of welding and cutting nozzles. Murex nozzle cleaner does not file the nozzle bore. Each set contains a range of nozzle cleaners from 0.46mm to 1.74mm.

Nozzle Cleaner Set 0700 153 391

Murex Nozzle Cleaner Set

74

Page 88: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Murex Combination Spanner

Provides the correct leverage for opening cylinder valves.

Spindle Key K5 0701 380 120

Murex Spindle Key

A standard cup type sparklighter.

SL3 Cup Sparklighter 0701 380 220SL3 Flints Pk 5 0701 380 221

SL3 Cup Sparklighter

A pistol type sparklighter.

SL2 Sparklighter Pistol 0700 154 807Flints Pk 9 (SL2) 0700 119 695

SL2 Sparklighter Pistol

Lightweight, easy-to-use steel brushes with wooden handles. Available with two, three or four rows of bristles.

Two-row mild steel brush 0760 024 100Three-row mild steel brush 0760 024 200Four-row mild steel brush 0760 024 300Two-row stainless steel brush 0760 024 500Three-row stainless steel brush 0760 024 600Four-row stainless steel brush 0760 024 700

Wire Brushes

Small Tools

For use with Murex gas equipment. Fits kennedy nut, hose nut and cylinder valve.

Combination Spanner 0701 414 766

75

Page 89: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Cylinder Trolleys

Takes one oxygen and one Acetylene cylinder.

TR3 Trolley 0700 014 042

TR3 Trolley

Takes one oxygen and one Propane cylinder.

Oxy/Propane Trolley 0700 014 043

oxy/Propane Trolley

Takes one standard cylinder.

Universal Single Trolley 0700 014 044

Universal Single Trolley

All cylinder trolleys have a hardwearing red epoxy coated finish and chains to hold the cylinder upright. Large rugged wheels mean the trolley can be wheeled over the roughest ground.

Cylinder Trolleys

76

Page 90: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Completing the extensive accessory portfolio from ESAB is our Special Process Equipment range, which includes tungsten grinders, gouging torches and fume extraction units. As with all our products our Special Process Equipment range conforms to all relevant EU legislation and standards.

Special Process Equipment

Page 91: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

78

The DS5 is a very light and portable dry-storage container for welding electrodes. The container has a multi-position handle offering numerous carrying positions, for increased comfort.

The oven utilises a 150°C preset thermostat, and houses a fibreglass sleeved rope heating element, which extends along the entire oven chamber. This provides uniform heating to all rods with in the oven chamber.

Capacity 5kgStorage temp. (°C) 150Voltage (V) AC 120/240Insulation 3.8cmOuter dimension (Ø/height, mm) 150/520Inner dimension (Ø/height, mm) 73/503Weight (kg) 4.8

DS5 Dry-Storage Container 240V 0700 011 086DS5 Dry-Storage Container 110V 0700 011 088

DS5 Dry-Storage Container

The DS8 is a very light and portable dry-storage container for welding electrodes. The container has a multi-position handle offering numerous carrying positions, for increased comfort.

The oven utilises a 150°C preset thermostat, and houses a fibreglass sleeved rope heating element, which extends along the entire oven chamber. This provides uniform heating to all rods with in the oven chamber.

Capacity 8kgStorage temp. (°C) 150Voltage (V) AC 120/240Insulation 3.8cmOuter dimension (Ø/height, mm) 216/609Inner dimension (Ø/height, mm) 86/503Weight (kg) 5.5

DS8 Dry-Storage Container 240V 0700 011 087DS8 Dry-Storage Container 110V 0700 011 089

DS8 Dry-Storage Container

ESAB Drying Equipment

Page 92: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

79

ESAB Drying Equipment

The PK 1 is a light and handy dry-storage container for electrodes. It is easy to carry and has a storage temperature of around 100ºC. The heating element runs from the top to the bottom and the top is fully insulated.

Capacity 9kgStorage temp. (°C) 100Drying temp. (°C) N/AVoltage (V) 24/42/110/230Output (kW) 0,1Outer dimension (Ø/height, mm) 225/610Inner dimension (Ø/height, mm) 100/470Weight (kg) 6

PK 1, 24 V 0000 515 063PK 1, 42 V 0000 515 052PK 1, 110 V 0000 515 062PK 1, 230 V 0000 515 064

PK 1 Dry-Storage Container

The PK 5 is a combined drying and dry-storage system for most types of electrodes. The drying time at full effect is 1-7 hours depending on the type of electrode. The temperature is thermostatically controlled and ranges from 50-300°C. The electrodes should be stored in the PK 5 without packaging. The heating element runs from the top to the bottom and the top is fully insulated.

Capacity 24kgStorage temp. (°C) 70-300Drying temp. (°C) N/AVoltage (V) 110/230Output (kW) 0,5Outer dimension (Ø/height, mm) 345/660Inner dimension (Ø/height, mm) 116/460Weight (kg) 13

PK 5 drying equipment, 110 V 0700 011 070PK 5 drying equipment, 230 V 0000 515 075

PK 5 Drying Equipment

The SK 40 is a dry-storage cabinet with 4 removable shelves for storing electrodes. The electrodes should be stored without packing. The cabinet is equipped with a thermometer, thermostat and control lamp. Temperature range 50-180°C.

Capacity 120kgStorage temp. (°C) 50-180Drying temp. (°C) N/AVoltage (V) 230Output (kW) 0,7Outer dimension (WxDxH, mm) 530 x 640 x 750Inner dimension (WxDxH, mm) 470 x 510 x 520Weight (kg) 55

SK 40 dry-storage cabinet, 230 V 0000 515 102

SK 40 Dry-Storage Cabinet

Page 93: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ESAB Drying Equipment

The PK 40 is a robust cabinet for the drying and dry storage of electrodes, with space for 10 packs. The drying time is set manually at between 50 and 350°C. Dimensions 570 x 620 x 790mm. Weight 70kg.

Capacity 72kgDrying temp. (°C) 50-350Voltage (V) 230Output (kW) 1,5Outer dimension (WxDxH, mm) 570 x 620 x 790Inner dimension (WxDxH, mm) 460 x 510 x 520Weight (kg) 70

PK 40 drying cabinet, 230 V 0000 515 105

PK 40 Drying Cabinet

The PK 410 is a robust cabinet for the drying and dry storage of electrodes. The drying temperature can be regulated between 50 and 400°C (450°C, 3-phase). The dry-storage temperature is around 150ºC. The PK 410 is equipped with a control lamp, electronic thermometer and electronic thermostat. The PK 410 also has a 7-day timer. This timer makes it possible to change automatically from drying to dry storage at selected times and temperature ranges.

230vCapacity 252kgStorage temp. (°C) 50-400Drying temp. (°C) 50-400Voltage (V) 230Output (kW) 3,5Outer dimension (WxDxH, mm) 860 x 760 x 1280Inner dimension (WxDxH, mm) 655 x 485 x 635Weight (kg) 230

400vCapacity 252kgStorage temp. (°C) 50-400Drying temp. (°C) 50-400Voltage (V) 400-3Output (kW) 4,5Outer dimension (WxDxH, mm) 860 x 760 x 1280Inner dimension (WxDxH, mm) 665 x 485 x 635Weight (kg) 230

PK 410 drying cabinet, 230 V, 1-phase 0000 515 103PK 410 drying cabinet, 400 V, 3-phase 0000 515 108

PK 410 Drying Cabinet

80

Page 94: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ESAB Drying Equipment

81

The JS 200 is a storage silo for welding powder (flux). The JS 200 keeps the flux dry and clean and also makes it extremely easy to handle the flux. The temperature can be adjusted between 100 and 300°C.

Capacity 200 LtStorage temp. (°C) 100-300Drying temp. (°C) N/AVoltage (V) 230Output (kW) 2Outer dimension (WxDxH, mm) 510 x 570 x 1755Weight (kg) 110

JS 200 storage silo 0000 515 090

JS 200 Storage Silo

JK 50 Powder Drier

The JK 50 is a container for drying and storing welding powder (flux). The JK 50 dries 50 litre flux at a maximum temperature of 500°C in around three hours. After drying, the temperature falls automatically to the pre-set dry storage temperature (150°C) within 12 hours.

Capacity 50 LtStorage temp. (°C) 50-250Drying temp. (°C) 50-500Voltage (V) 400-3Output (kW) 3,7Outer dimension (Ø/height, mm) 860/1600Weight (kg) 190

JK 50, 400 V, 3-phase 0000 515 091

Page 95: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Murex Drying Equipment

Heated Quivers are designed for use on installations with 100 volt or 240 volt supply. The quiver will maintain an even temperature of 100°C dependant on the amount of electrodes stored. Complete with handle/stand.

Supply 110v or 110/240v. AC 50/60HzLoad 150 wattsOverall dimensions (WxDxH, mm) 120 x 500 x 110Weight Empty 3 KiloCapacity 9kg of Welding Electrodes

Heated Quiver 110 V 0701 380 485Heated Quiver 110/240V 0701 380 486Insulated Heated Quiver 240v 0701 502 358

Quivers

This oven is designed for rugged site conditions, where it can be used as either a holding or storage oven.

Temperature range 100-300°C thermostatically controlledSupply 110.240v. (Dual voltage)Load 300 wattsOverall dimensions (WxDxH, mm) 175 x 610 x 210Internal dimensions (WxDxH, mm) 115 x 480 x 150Weight Empty 10 KiloCapacity 13kg of Welding Electrodes

Portable Drying Oven – Dual Voltage 0701 380 083

Portable Drying oven – Dual voltage

These ovens can be used as the sole means of drying or as the intermediary, until transferred to a portable oven or a quiver.

Temperature range 100-300°C thermostatically controlledSupply 110v or 250v AC. 50/60HzLoad 1500 wattsOverall dimensions (WxDxH, mm 520 x 620 x 610Internal dimensions (WxDxH, mm) 455 x 470 x 455Weight Empty 42 KiloCapacity 136kg of Welding Electrodes

Stationary Drying Oven 250V AC 0700 655 258Stationary Drying Oven 110V AC 0700 655 259

Stationary Drying oven

82

Page 96: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

83

The robust, high temperature oven has a digital display. It has accurate temperature control from 0 – 500ºC. Visual temperature indication is by the digital display. Temperature settings are digitally set.

Temperature range 0-500°C thermostatically controlledSupply 110 or 240v Load 3 KwOuter dimensions (WxDxH, mm 600 x 685 x 760Internal dimensions (WxDxH, mm) 470 x 480 x 470Weight Empty 75kgCapacity 136kg of Welding Electrodes Digital Display YES

High Temp Oven – Digital Display 0701 380 408

As above but with Chart Recorder

Storage Temperature 0-500°C Hold Cycle 1 YES Baking Temperature 0-500°C Hold Cycle 2 YES Supply 110 or 240v Load 3 Kw Delay Timer 7-Day ProgrammableChart Recorder Optional Outer dimensions (WxDxH, mm 600 x 685 x 760Internal dimensions (WxDxH, mm) 470 x 480 x 470Weight Empty 75kgCapacity 136kg of Welding Electrodes Digital Display YES

High Temp Oven – CR DD Timer 0701 380 410

High Temperature ovens

As the Stationary Oven, but with a digital display.

Temperature range 0-300°C thermostatically controlledSupply 110/240vLoad 2250 wattsOverall dimensions (WxDxH, mm 530 x 620 x 620Internal dimensions (WxDxH, mm) 465 x 480 x 465Weight Empty 45kgCapacity 136kg of Welding Electrodes Digital Display YES

Stationary Oven Digital 250V AC 0701 502 381

Stationary Drying oven Digital

Alternative Drying Ovens

Page 97: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Heating Element, Top 0700 011 071 Heating Element, Bottom 0700 011 072

Thermostat 0700 011 073 Contactor 0700 011 074

Spare Parts for ESAB PK40

Heating Element 24V 0700 011 001 Heating Element 42V 0700 011 002 Heating Element 110V 0700 011 003 Heating Element 230V 0700 011 004 Signal Lamp 24V 0700 011 005 Signal Lamp 42V 0700 011 006

Signal Lamp 110V 0700 011 007 Signal Lamp 230V 0700 011 008 Hinged Lid 0700 011 010 Knob 0700 011 011 Handle 0700 011 012

Spare Parts for ESAB PK1

Heating Element 0700 011 015 Signal Lamp 0700 011 016

Thermostat 0700 011 017 Thermometer 0700 011 018

Spare Parts for ESAB PK5

Heating Element 0700 011 020 Signal Lamp Red 0700 011 021 Signal Lamp Green 0700 011 022

Thermostat 0700 011 023 Thermometer 0700 011 024

Spare Parts for ESAB SK40

84

Spare Parts

Page 98: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

EMC-Filter 0700 011 039 Heating Element, Top 0700 011 040 Heating Element, Bottom 0700 011 041 Signal Lamp Green Big 0700 011 042 Signal Lamp Red Big 0700 011 043 Signal Lamp Red, Small 0700 011 044

Controller 0700 011 045 Sensor 0700 011 046 Timer 0700 011 047 Contactor 0700 011 048 Main Switch 0700 011 049 Auto-Manual Switch 0700 011 050

Spare Parts for ESAB PK410

Heating Element 0700 011 030 Signal Lamp 0700 011 031

Thermostat 0700 011 032 Thermometer 0700 011 033

Spare Parts for ESAB JS200

Spare Parts

Element Stat Oven 240v Pk 2 0701 380 149Element 110V (Quiver) 0701 380 487Toggle Switch (Quiver) 0701 380 488

Element 240V Kit (Portable Oven) 0701 411 237Thermostat 110/240V (Ovens) 0701 411 240

Spare Parts for Murex Drying Equipment

Heating element 0700 011 082

Spare Parts for JK50

85

Page 99: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The G-Tech Handy II is a portable enclosed Tungsten Electrode grinder, which is easy to operate. The Tungsten electrode can be ground without using a holder or tool. The grinding head can be adjusted in three different positions: 0, 1 and 2. In each position another part of the grinding disc will be used, and both sides of the disc can be utilised, giving extended use and reduced cost.

The G-Tech Handy II features a multifunctional cover, which allows the electrode to be ground in a 90º angle. The machine is prepared for fixing to a table using the accessories included.

The G-Tech Handy II is delivered complete for grinding of tungsten electrodes in the dimension of 1,6 – 2,0 - 2,4 - 3,2mm. A head for grinding of 1,0 – 4,0 – 4,8 – 6,0mm electrodes can be supplied as an option.

The G-Tech Handy II features:Ergonomic Design & LightweightAdjustable Grinding Angles (20º - 60º)Double Sided Grinding Disc – Coated with Diamante PowderAllows Exact Repetition of Longitudinal GrindingCan be Connected to a Vacuum Cleaner Option: Orbital-Set for Grinding of Short Tungsten-Electrodes with a length up to 15mm Max

G-Tech Handy II Complete 240V/50Hz 0700 009 886G-Tech Handy II complete US version with 120V/50Hz 0700 009 067

G-Tech Handy II

Spares for G-Tech Handy II (Fig 9)

Spares for G-Tech Handy II Fig 9

Tungsten Grinders

1 Grinding Disc 0700 009 068 2 Second Head for Diameters

1, 0/4, 0/4, 8/6, 0mm Red 0700 009 069 3 Replacement Head for Diameters

1, 6/2, 0/2, 4/3, 2mm Black 0700 009 070 4 Orbital set for Grinding of Short

Tungsten Electrodes 0700 009 071 5 Clamp Holder ‘Spannfix’ Size I (85mm) 0700 009 072 6 Solid Metal Box ‘ESAB’ 0700 009 073

Contents:• Tungsten Grinder• Tungsten Holder• Allen Keys x 2• Spanners x 3• Bench Mount• Hoover Hose Connection

86

Page 100: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The G-Tech Handy is an easy to use tungsten electrode grinder. The grinding angle can be adjusted easily, using just one hand. The G-Tech Handy grinds electrodes with dimensions of 1.0 to 4.0mm and it is equipped with a dust filter. The speed (rpm) can be adjusted and the unit weighs just 2.8kg. The G-Tech Handy is delivered in a durable hard case that makes it easy to transport.

G-Tech Handy, 230 V, 50 Hz 0700 009 883

G-Tech Handy

1 Motor 230 V 0700 009 041 2 ON/Off switch 0700 009 065 3 Carbon brush 0700 009 064 4 Grinding head 0700 009 045 5 Spindle for diamond disc 0700 009 046 6 Grinding chamber 0700 009 047 7 Guide for electrode holder 0700 009 048 8 Allen key 0700 009 049 9 Allen screw 0700 009 050 10 Spring 0700 009 056 11 Grinding position selector 0700 009 051 12 Screw 0700 009 052 13 Filter housing 0700 009 053 14 Filter cover 0700 009 054 15 Allen key to fit the filter cover 0700 009 055 16 Rubber seal big 0700 009 057 17 Screw to fit filter cassette 0700 009 058 18 Screw to fit diamond disc 0700 009 059 19 Rubber seal small 0700 009 060 20 Filter cassette 0700 009 029 21 Diamond disc 0700 009 028 22 Inspection glass 0700 009 037 23 Electrode holder 0700 009 030 24 Collet body 1,0mm 0700 009 034 24 Collet body 1,6mm 0700 009 031 24 Collet body 2,0mm 0700 009 035 24 Collet body 2,4mm 0700 009 032 24 Collet body 3,2mm 0700 009 033 24 Collet body 4,0mm 0700 009 036 Case for the machine 0700 009 061 (not shown)

Spares for G-Tech Handy (Fig 10)

SPARES FOR G-TECH HANDy Fig 10

Tungsten Grinders

87

Page 101: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

The ESAB G-Tech is a tungsten-electrode grinder with a unique enclosed wet-grinding system. A wet grinding system is the most effective protection from thoriated tungsten grinding dust. All dust is collected in the liquid and the risk of oxidation of the electrode is reduced. The grinding angle can be adjusted and the tip can be ground in a 90 degrees angle to make it less pointed. The small table seen in the picture is not included and is not available from ESAB.

G-Tech 230V, 50Hz 0700 009 880G Tech 115V 50Hz (UK) 0700 009 881Gasket 0700 009 001 Diamond Disc, G-Tech (inc nut) 0700 009 002 Liquid 250 ml 0700 009 004 Return Bottle 250 ml 0700 009 005 Collet Body 1,0mm G-Tech 0700 009 007 Collet Body 1,6mm G-Tech 0700 009 008 Collet Body 2,0mm G-Tech 0700 009 018 Collet Body 2,4mm G-Tech 0700 009 009 Collet Body 3,2mm G-Tech 0700 009 010 Collet Body 4,0mm G-Tech 0700 009 011 Collet Body 4,8mm G-Tech 0700 009 019 T-Piece 0700 009 012 Spacer Piece 0700 009 013 Liquid 5000 ml 0700 009 015 Accessory box complete 0700 009 016 Waste Container 0700 009 017 Accessory box complete 0700 009 020 Inspection Glass 0700 009 037 Kit – Inspection window G-Tech with seal 0700 009 038 Kit – Electrode holder and handle 0700 009 039 Kit – Seal abrasive wheel with seal and ‘O’ ring 0700 009 040

G-Tech and Spares

The TIG PEN allows the welder to control the tip of the filler wire with great accuracy even at a long distance from the weld seam and in the process helps the welder to obtain a higher quality weld. It also eliminates waste of the filler wire. The TIG Pen can be used with any wire diameter from 1.0 to 3.2mm

TIG Pen 0700 009 026

TIG Pen

Tungsten Grinders & Electrodes

88

Page 102: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

This is a high-quality range of tungsten electrodes available in thoriated, ceriated, pure and lanthanated (Gold Plus) versions. ESAB tungsten electrodes have excellent welding and ignition properties. They are delivered in plastic boxes, each containing ten electrodes. The electrodes are available in 150 and 175mm lengths.

WT20 1,0 x 175mm (Thoriated) Red 0151 574 001WT20 1,6 x 175mm (Thoriated) Red 0151 574 002WT20 2,4 x 175mm (Thoriated) Red 0151 574 003WT20 3,2 x 175mm (Thoriated) Red 0151 574 004WT20 4,0 x 175mm (Thoriated) Red 0151 574 005

W Pure 1,0 x 175mm Green 0151 574 008W Pure 1,6 x 175mm Green 0151 574 009W Pure 2,4 x 175mm Green 0151 574 010W Pure 3,2 x 175mm Green 0151 574 011W Pure 4,0 x 175mm Green 0151 574 012

WC20 1,0 x 175mm (Ceriated) Grey 0151 574 036WC20 1,6 x 175mm (Ceriated) Grey 0151 574 037WC20 2,4 x 175mm (Ceriated) Grey 0151 574 038WC20 3,2 x 175mm (Ceriated) Grey 0151 574 039WC20 4,0 x 175mm (Ceriated) Grey 0151 574 040

WL15 1,0 x 175mm Gold Plus (Lanthanated) Gold 0151 574 050WL15 1,6 x 175mm Gold Plus (Lanthanated) Gold 0151 574 051WL15 2,4 x 175mm Gold Plus (Lanthanated) Gold 0151 574 052WL15 3,2 x 175mm Gold Plus (Lanthanated) Gold 0151 574 053WL15 4,0 x 175mm Gold Plus (Lanthanated) Gold 0151 574 054WL15 4,8 x 175mm Gold Plus (Lanthanated) Gold 0151 574 055

WT20 1,0 x 150mm (Thoriated) Red 0151 574 201WT20 1,6 x 150mm (Thoriated) Red 0151 574 202WT20 2,0 x 150mm (Thoriated) Red 0151 574 244WT20 2,4 x 150mm (Thoriated) Red 0151 574 203WT20 3,2 x 150mm (Thoriated) Red 0151 574 204WT20 4,0 x 150mm (Thoriated) Red 0151 574 205

W Pure 1,0 x 150mm Green 0151 574 208W Pure 1,6 x 150mm Green 0151 574 209W Pure 2,0 x 150mm Green 0151 574 245W Pure 2,4 x 150mm Green 0151 574 210W Pure 3,2 x 150mm Green 0151 574 211W Pure 4,0 x 150mm Green 0151 574 212

WC20 1,0 x 150mm (Ceriated) Grey 0151 574 236WC20 1,6 x 150mm (Ceriated) Grey 0151 574 237WC20 2,0 x 150mm (Ceriated) Grey 0151 574 242WC20 2,4 x 150mm (Ceriated) Grey 0151 574 238WC20 3,2 x 150mm (Ceriated) Grey 0151 574 239WC20 4,0 x 150mm (Ceriated) Grey 0151 574 240

Tungsten Electrodes

Tungsten Electrodes

89

Page 103: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

K4000 (Fig 11)

Spares for K4000 Fig 11

Gouging Torches

90

The arc air gouging torch is supplied with a 2.14m (7’) long cable. The torch accepts both round and flat electrodes, ranging in size from 4mm (5/32”) to 13mm (1/2”) round electrodes and 10mm (3/8”) and 16mm (5/6”) flat electrodes. The K4000 is rated at 1,000 Amps, it uses compressed air between 5.6 and 7.0kg/cm2 (80 and 100 psi) and between 0.85 and 0.99 m3/min (30 and 35 cfm). The torch and cable weigh 2.4kg (5.4lbs). Supplied without connections.

Gouging torch including monocable 0760 018 100 K4000 torch 0760 018 110 Mono cable K4000 0760 018 119 1 & 2 Insulator assembly 0760 018 101 3 & 4 Lever assembly 0760 018 103 5 to 8 Valve bonnet assembly 0760 018 106 9 Upper arm 0760 018 112 10 & 11 Nozzle 0760 018 113 12 Body 0760 018 115 13 Hinge pin 0760 018 116 14 Spring 0760 018 117 15 Handle 0760 018 118

Spares for Monocable

‘O’ Ring kit 0760 018 121Clamp kit 0760 018 125Conductor kit 0760 018 126Hose cover 0760 018 130Boot insulator 0768 018 131

Page 104: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Spares for Flair 600 Fig 12

1 Set of screws 0468 253 001 2 Insulating Caps 0468 253 002 3 Brass Lever 0468 253 003 4 Injection Nozzle 0160 580 001 6 Lever Insulation 0468 253 006 7 Spring 0468 253 007 8 Hinge Pin 0468 253 008 9 Body 0468 253 005 10 Valve 0468 253 010 15 & 16 Valve Seat 0468 253 009 11,12,14 Push Button + Link 0468 253 014 13 Handle 0468 253 013

Spares for Flair 600 (Fig 12)

The Flair 600 arc air torch for carbon up to 10mm (3/4”) and 4 x 15mm (5/32 x 9/16”) rectangular. The Flair 1600 arc air torch for carbon up to 19mm (3/4”) and 5 x 20mm (3/16 x 3/4”) rectangular.

Flair 600, incl monocable 0468 253 880Flair 600 10 metre cable 0700 006 499Torch only 0468 253 016Monocable only 0468 253 015

Flair 1600, incl monocable 0468 253 881Torch only 0468 253 036Monocable only 0468 253 035

Flair 600 and 1600

Gouging Torches

91

Page 105: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Spares for Flair 1600 Fig 13

1 Set of screws 0468 253 001 2 Insulating Caps 0468 253 002 3 Brass Lever 0468 253 023 4 Injection Nozzle 0468 253 024 6 Lever Insulation 0468 253 006 7 Spring 0468 253 027 8 Hinge Pin 0468 253 008 9 Body 0468 253 025 10 Valve 0468 253 010 15 & 18 Valve Seat 0468 253 009 11,12,14 Push Button + Link 0468 253 014 13,16,17 Handle 0468 253 033

Spares for Flair 1600 (Fig 13)

Gouging Torches

92

Page 106: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Arc air gouging with carbon electrodes and compressed air is the fastest and cheapest process for cutting/gouging material in conjunction with repairs and similar processes. A carbon electrode is used to melt the material and, at the same time, a powerful jet of air blows away the molten material. The compressed air also cools the carbon electrode. Carbon electrodes can be used for the arc air gouging of unalloyed and low-alloy steel, stainless steel, cast iron and other metals. A complete set of arc air gouging equipment consists of an arc air gouger, the Flair 600 or Flair 1600, alternatively the K4000 with mono cable. OK Carbon™, ESAB’s focused but comprehensive range of arc air carbons enables the user to gouge in a wide range of applications, within foundries, steel industry, shipbuilding, steel construction and in maintenance workshops. The OK Carbon™ range gives the user the highest possible efficiency by removal of metal per unit length or unit time.

DC Pointed, 4 x 305mm PK 100 0700 007 002DC Pointed, 5 x 305mm PK 100 0700 007 003DC Pointed, 6,35 x 305mm PK 200 0700 007 004DC Pointed, 8 x 305mm PK 200 0700 007 006DC Pointed, 10 x 305mm PK 100 0700 007 007

DC Pointed, 6,35 x 5,10mm PK 200 0700 007 104DC Pointed, 8 x 510mm PK 150 0700 007 106DC Pointed, 10 x 510mm PK 50 0700 007 107DC Pointed, 13 x 455mm PK 50 0700 007 108

DC Jointed, 10 x 430mm PK 100 0700 007 410DC Jointed, 13 x 430mm PK 50 0700 007 411DC Jointed, 16 x 430mm PK 50 0700 007 412DC Jointed, 19 x 430mm PK 25 0700 007 413

AC Jointed, 4 x 355mm PK 100 0700 007 414AC Jointed, 5 x 355mm PK 50 0700 007 415AC Jointed, 6.35 x 355mm PK 50 0700 007 416AC Jointed, 8 x 355mm PK 50 0700 007 417AC Jointed, 9,5 x 355mm PK 50 0700 007 418

DC Rectangular, 4 x 15 x 305mm PK 125 0114 800 112DC Rectangular, 5 x 15 x 305mm PK 125 0700 007 502DC Rectangular, 5 X 20 X 305mm PK 100 0700 007 503

oK Carbon™

Gouging Carbons

93

Page 107: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Fume Extraction Units

The CarryVac 2 P150/P150 AST are two small, lightweight, portable extraction units designed to be carried to the working area. Connected to a welding torch or to an extraction nozzle, the CarryVac 2 units extract the fume directly at source. The polluted air is filtered and captured in a hygienically-packed filter. The CarryVac 2 is equipped with a filter indicator, which shows when the filter must be replaced. It is ideal for maintenance welding, low and medium-duty cycle. The filter capacity is approximately 200kg of solid wire or twelve 15kg spools. The CarryVac 2 P150 AST is equipped with an automatic start/stop function, which increases the service life of each filter and of the unit itself. Please also see ESAB Centrovac extraction torch range.

CarryVac 2 P150 220-240V 0700 003 883CarryVac 2 P150 AST 220-240V 0700 003 884CarryVac 2 P150 110-120V 0700 003 885CarryVac 2 P150 AST 110-120V 0700 003 886Motor 220-240V 0468 455 021Motor 110-120V 0468 455 022Hose 45mm, 1.6m 0154 352 015Hose 45mm, 3.5m 0154 352 008Hose 45mm, 5m 0154 352 006Hose 45mm, 15m 0154 352 002Main filter CarryVac 2 0700 003 004Main filter CarryVac (previous model) 0468 455 001Pre filter 0468 455 002PC-board including cables 0700 003 005Carbon brushes 0700 003 010Coarse separator complete 0468 455 014Suction nozzle TM-80, round 80mm 0700 100 080Suction nozzle TM-200, 200mm wide 0700 100 200Suction nozzle PM-300, 300mm wide 0700 100 300Magnet for suction nozzle 0332 010 880

Carryvac 2

94

Page 108: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Notes

95

Page 109: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

96

Notes

Page 110: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

WorldSince 1904, ESAB has been both a pioneer and leader in welding and cutting development technology. Today ESAB combines world leadership with global applications expertise.

Page 111: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Global solutions for local customers – everywhere.

Find out more on www.esab.com

Part No: XA00155720FMS/105062

World leader in welding and cutting technology and systems

ESAB operates at the forefront of

welding and cutting technology. Over

one hundred years of continuous

improvement in products and processes

enables us to meet the challenges of

technological advance in every sector

in which ESAB operates.

Quality and environment standards

Quality and the environment are two

key areas of focus. ESAB is one of

few international companies to have

achieved the new ISO 14001 standard

in Environmental Management

Systems across all our global

manufacturing facilities.

At ESAB, quality is an ongoing

process that is at the heart of all our

production processes and facilities

worldwide. Multinational manufacturing,

local representation and an international

network of independent distributors

brings the benefits of ESAB quality

and unrivalled expertise in materials

and processes within reach of all our

customers, wherever they are located.

ESA

B r

eser

ves

the

right

to

alte

r sp

ecifi

catio

ns w

ithou

t pr

ior

notic

e.

The ESAB group is certified

according to ISO 14001 &

OHSAS 18001

PPE & Welding Accessories

PP

E &

Weld

ing A

ccesso

ries

Personal Protection

Welding tools and accessories

sPecial Process equiPment

Page 112: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

PPE and Welding AccessoriesPERSONAL PROTECTIONWELDING TOOLS AND ACCESSORIESSPECIAL PROCESS EQUIPMENT

With over 100 years of experience in virtually every type of welding andcutting application across all industries, ESAB has an unrivalled abilityto solve welding and cutting problems wherever in the world they mayoccur. ESAB also has one of the most comprehensive product rangesin the welding and cutting industry.

Automated Cutting Equipment

• Oxy-Fuel Gas Cutters

• Plasma Cutters

• Laser Cutters

• Water Jet Cutters

Welding Consumables

• Manual Metal Arc Electrodes

• MIG/MAG Wires

• Flux Cored Wires

• Metal Cored Wires

• TIG Rods

• Sub Arc Fluxes and Wires

• Strip Cladding

Welding Accessories

• Helmets and goggles

• Hearing protection

• Respiratory equipment and masks

• Clothing and gloves

• Welding screens

• Welding cable, connectors and lugs

• Electrode holders

• Anti spatter and chemicals sundries

• General tools

Standard Equipment

• Manual Metal Arc Welders

• Semi Automatic MIG/MAG Welders

• TIG Welders

• Pulsed Arc Welders

• Manual Plasma Cutters

• Submerged Arc Welders

• Orbital TIG Welders

• Engine Driven Welders

Automatic Equipment

• Column & Boom

• Positioners

• Roller Beds

• Beam Welding Systems

• Mechanised TIG

• Plasma Welders

• Welding Tractors

• Storage Tank Welders

• Strip Cladding Systems

• Joint Tracking Systems

• Integrated Engineering Systems

• Turnkey Installations

• Friction Stir Welders

The ESAB Product Portfolio includes:

Global solutions for local customers – everywhere.

Find out more on www.esab.com

PWX 426 03/06

ESA

B P

PE

and W

eld

ing A

ccesso

ries

Page 113: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

WorldSince 1904, ESAB has been both a pioneer and leader in welding and cuttingdevelopment technology. Today ESAB combines world leadership with globalapplications expertise.

With over 100 years of experience, and a presence in over 80 countries worldwide, ESAB is probably the mostrecognised brand in welding and cutting with a productportfolio, which includes:

Standard Welding and Cutting Equipment

Automatic Equipment

Automated Cutting Equipment

Welding Consumables

Welding Accessories

By continuously improving and developing our products and manufacturing processes, we meet the challenges of technological advance in every sector and market weoperate in. Delivering quality products and services remains at the heart of everything we do across all our global sales and product operations.

leaderin welding and cutting technology and systems

Page 114: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

WorldSince 1904, ESAB has been both a pioneer and leader in welding and cuttingdevelopment technology. Today ESAB combines world leadership with globalapplications expertise.

With over 100 years of experience, and a presence in over 80 countries worldwide, ESAB is probably the mostrecognised brand in welding and cutting with a productportfolio, which includes:

Standard Welding and Cutting Equipment

Automatic Equipment

Automated Cutting Equipment

Welding Consumables

Welding Accessories

By continuously improving and developing our products and manufacturing processes, we meet the challenges of technological advance in every sector and market weoperate in. Delivering quality products and services remains at the heart of everything we do across all our global sales and product operations.

leaderin welding and cutting technology and systems

Page 115: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks and Screens 6-20

Respiratory Equipment 21-26

Lenses, Spectacles, Goggles and Visors 27-33

Hearing Protection 34

Hard Hats 34

Welding Curtains 35

Welding Jackets and Aprons 35-36

Other Welding Apparel 37

Clothing 37-41

Welding Gloves 42-48

Safety Footwear 49-56

PERSONAL PROTECTION

Cables, Connectors and Electrode Holders 58-61

Clamps 61-63

Anti Spatter and Chemical Sundries 64-66

Temperature and Chemical Indicators 66-67

Chipping Hammers 68-69

Fillet Gauges 69-70

Small Tools 70-73

Cylinder Trolleys 74

Drying Equipment 75-80

WELDING TOOLS & ACCESSORIES

Tungsten Grinders 82-84

Tungsten Electrodes 84-85

Arc Air Gouging Torches and Spares 86-89

Fume Extraction Units 90

SPECIAL PROCESS EQUIPMENT

ESAB offer a comprehensive range of PersonalProtection Equipment, covering everything fromhead to foot, for both welding and cutting andgeneral engineering applications. All ESABproducts conform to all relevant EU legislation|and standards.

As Health and Safety Standards improve year on year, so does ESAB’s commitment to providinga product portfolio capable of meeting the everincrease demands of the markets we serve. As you would expect from a leading supplier ofwelding and cutting solutions, the ESAB productrange is second to none for quality and reliability.

Contents

Personal Protection

5

Page 116: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks and Screens 6-20

Respiratory Equipment 21-26

Lenses, Spectacles, Goggles and Visors 27-33

Hearing Protection 34

Hard Hats 34

Welding Curtains 35

Welding Jackets and Aprons 35-36

Other Welding Apparel 37

Clothing 37-41

Welding Gloves 42-48

Safety Footwear 49-56

PERSONAL PROTECTION

Cables, Connectors and Electrode Holders 58-61

Clamps 61-63

Anti Spatter and Chemical Sundries 64-66

Temperature and Chemical Indicators 66-67

Chipping Hammers 68-69

Fillet Gauges 69-70

Small Tools 70-73

Cylinder Trolleys 74

Drying Equipment 75-80

WELDING TOOLS & ACCESSORIES

Tungsten Grinders 82-84

Tungsten Electrodes 84-85

Arc Air Gouging Torches and Spares 86-89

Fume Extraction Units 90

SPECIAL PROCESS EQUIPMENT

ESAB offer a comprehensive range of PersonalProtection Equipment, covering everything fromhead to foot, for both welding and cutting andgeneral engineering applications. All ESABproducts conform to all relevant EU legislation|and standards.

As Health and Safety Standards improve year on year, so does ESAB’s commitment to providinga product portfolio capable of meeting the everincrease demands of the markets we serve. As you would expect from a leading supplier ofwelding and cutting solutions, the ESAB productrange is second to none for quality and reliability.

Contents

Personal Protection

5

Page 117: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

The ESAB Eye-Tech 10/11 Mono has a switch on the inside of the helmetthat gives you a fixed shade level of 10 or 11 during welding.

Eye-Tech 10/11 Mono 0700 000 888Eye-Tech 10/11 prepared for fresh air 0700 002 925Eye-Tech 10/11 Mono, incl Air 160 8h 0700 002 935Eye-Tech 10/11 Mono, incl Air 160 (UK) 0700 002 963Eye-Tech 10/11 Mono, incl Air 190 5h 0700 002 936Eye-Tech 10/11 Mono, incl Air 190 5h (UK) 0700 002 964Eye-Tech 10/11 Mono, incl Air 190 8h 0700 002 937Eye-Tech 10/11 Mono, incl Air 190 8h (UK) 0700 002 965Eye-Tech 10/11 Mono, incl Air CA 0700 002 903

EYE-TECH 10/11 MONO

The Eye-Tech family consists of four different helmets that represent the professional range withinwelding helmets. All Eye-Techs are CE, CSA, ANSI, AS/NZA and DIN approved, have cartridgespowered by solar cells with battery back up, and are both waterproof and shock resistant. Theselightweight (480g), fully adjustable and ergonomically designed helmets can also be combined withfresh air units.

EYE-TECH FAMILY

Eye-Tech 5-13 cartridge, incl satellite 0700 000 035Eye-Tech 9-13 cartridge 0700 000 001

Eye-Tech 10-12 Select cartridge 0700 000 022Eye-Tech 10/11 Mono cartridge 0700 000 028

EYE-TECH CARTRIDGES

Helmet W/O Cartridge 0700 000 002Head Band Kit 0700 000 003Sweat Band 0700 000 005Front Lens Frame 0700 000 006Potentiometer Switch 0700 000 007Sensor Bar 0700 000 008Helmet Knob 0700 000 009Protective Lens Front 0700 000 010Protective Lens Inside 0700 000 011Coloured Lens Green DIN 2 0700 000 024

Coloured Lens Green DIN 1.2 0700 000 025 Coloured Lens Blue DIN 0.8 0700 000 0265-13 Helmet without Cartridge 0700 000 034 Potentiometer Knob 5-13 0700 000 037 Sensitivity Knob 5-13 0700 000 038 Satellite Cover Plate 0700 000 039 Hard Hat Adapter 0700 000 043Hard Hat Eye-Tech 0700 000 052Neck and chin protection 0700 000 047

EYE-TECH SPARES

The ESAB Eye-Tech 5-13 offers unlimited personal settings. The latest LCDtechnology enables you to adjust the shade between DIN 5-9 and/or DIN 9-13. The ‘grinding mode’ (DIN 4) can easily be activated from the outside.The Eye-Tech 5-13 can be used in all welding applications including oxy/fuelgas welding (cannot be used for lazer welding).

Eye-Tech 5-13 0700 000 890Eye-Tech 5-13 prepared for fresh air 0700 002 922Eye-Tech 5-13, incl Air 160 0700 002 938Eye-Tech 5-13, incl Air 160 (UK) 0700 002 966Eye-Tech 5-13, incl Air 190 5h 0700 002 939Eye-Tech 5-13, incl Air 190 5h (UK) 0700 002 967Eye-Tech 5-13, incl Air 190 8h 0700 002 940Eye-Tech 5-13, incl Air 190 8h (UK) 0700 002 968Eye-Tech 5-13, incl Air CA 0700 002 906

EYE-TECH 5-13

The ESAB Eye-Tech 9-13 is equipped with step-less shade setting ofbetween 9 and 13 and it can be adjusted from the outside during welding.

Eye-Tech 9-13 0700 000 880Eye-Tech 9-13 prepared for fresh air 0700 002 923Eye-Tech 9-13, incl Air 160 8h 0700 002 929Eye-Tech 9-13, incl Air 160 (UK) 0700 002 957Eye-Tech 9-13, incl Air 190 5h 0700 002 930Eye-Tech 9-13, incl Air 190 5h (UK) 0700 002 958Eye-Tech 9-13, incl Air 190 8h 0700 002 931Eye-Tech 9-13, incl Air 190 8h (UK) 0700 002 959Eye-Tech 9-13, incl air CA 0700 002 891

EYE-TECH 9-13

The ESAB Eye-Tech 10-12 Select has a switch on the inside of the helmetfor easy adjustment between shade areas 10-11 and 11-12.

Eye-Tech 10-12 Select 0700 000 884Eye-Tech 10-12 prepared for fresh air 0700 002 924Eye-Tech 10-12 Select, incl Air 160 8h 0700 002 932Eye-Tech 10-12 Select, incl Air 160 (UK) 0700 002 960Eye-Tech 10-12 Select, incl Air 190 5h 0700 002 933Eye-Tech 10-12 Select, incl Air 190 5h (UK) 0700 002 961Eye-Tech 10-12 Select, incl Air 190 8h 0700 002 934Eye-Tech 10-12 Select, incl Air 190 8h (UK) 0700 002 962Eye-Tech 10-12 Select, incl Air CA 0700 002 894

EYE-TECH 10-12 SELECT

6 7

Page 118: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

The ESAB Eye-Tech 10/11 Mono has a switch on the inside of the helmetthat gives you a fixed shade level of 10 or 11 during welding.

Eye-Tech 10/11 Mono 0700 000 888Eye-Tech 10/11 prepared for fresh air 0700 002 925Eye-Tech 10/11 Mono, incl Air 160 8h 0700 002 935Eye-Tech 10/11 Mono, incl Air 160 (UK) 0700 002 963Eye-Tech 10/11 Mono, incl Air 190 5h 0700 002 936Eye-Tech 10/11 Mono, incl Air 190 5h (UK) 0700 002 964Eye-Tech 10/11 Mono, incl Air 190 8h 0700 002 937Eye-Tech 10/11 Mono, incl Air 190 8h (UK) 0700 002 965Eye-Tech 10/11 Mono, incl Air CA 0700 002 903

EYE-TECH 10/11 MONO

The Eye-Tech family consists of four different helmets that represent the professional range withinwelding helmets. All Eye-Techs are CE, CSA, ANSI, AS/NZA and DIN approved, have cartridgespowered by solar cells with battery back up, and are both waterproof and shock resistant. Theselightweight (480g), fully adjustable and ergonomically designed helmets can also be combined withfresh air units.

EYE-TECH FAMILY

Eye-Tech 5-13 cartridge, incl satellite 0700 000 035Eye-Tech 9-13 cartridge 0700 000 001

Eye-Tech 10-12 Select cartridge 0700 000 022Eye-Tech 10/11 Mono cartridge 0700 000 028

EYE-TECH CARTRIDGES

Helmet W/O Cartridge 0700 000 002Head Band Kit 0700 000 003Sweat Band 0700 000 005Front Lens Frame 0700 000 006Potentiometer Switch 0700 000 007Sensor Bar 0700 000 008Helmet Knob 0700 000 009Protective Lens Front 0700 000 010Protective Lens Inside 0700 000 011Coloured Lens Green DIN 2 0700 000 024

Coloured Lens Green DIN 1.2 0700 000 025 Coloured Lens Blue DIN 0.8 0700 000 0265-13 Helmet without Cartridge 0700 000 034 Potentiometer Knob 5-13 0700 000 037 Sensitivity Knob 5-13 0700 000 038 Satellite Cover Plate 0700 000 039 Hard Hat Adapter 0700 000 043Hard Hat Eye-Tech 0700 000 052Neck and chin protection 0700 000 047

EYE-TECH SPARES

The ESAB Eye-Tech 5-13 offers unlimited personal settings. The latest LCDtechnology enables you to adjust the shade between DIN 5-9 and/or DIN 9-13. The ‘grinding mode’ (DIN 4) can easily be activated from the outside.The Eye-Tech 5-13 can be used in all welding applications including oxy/fuelgas welding (cannot be used for lazer welding).

Eye-Tech 5-13 0700 000 890Eye-Tech 5-13 prepared for fresh air 0700 002 922Eye-Tech 5-13, incl Air 160 0700 002 938Eye-Tech 5-13, incl Air 160 (UK) 0700 002 966Eye-Tech 5-13, incl Air 190 5h 0700 002 939Eye-Tech 5-13, incl Air 190 5h (UK) 0700 002 967Eye-Tech 5-13, incl Air 190 8h 0700 002 940Eye-Tech 5-13, incl Air 190 8h (UK) 0700 002 968Eye-Tech 5-13, incl Air CA 0700 002 906

EYE-TECH 5-13

The ESAB Eye-Tech 9-13 is equipped with step-less shade setting ofbetween 9 and 13 and it can be adjusted from the outside during welding.

Eye-Tech 9-13 0700 000 880Eye-Tech 9-13 prepared for fresh air 0700 002 923Eye-Tech 9-13, incl Air 160 8h 0700 002 929Eye-Tech 9-13, incl Air 160 (UK) 0700 002 957Eye-Tech 9-13, incl Air 190 5h 0700 002 930Eye-Tech 9-13, incl Air 190 5h (UK) 0700 002 958Eye-Tech 9-13, incl Air 190 8h 0700 002 931Eye-Tech 9-13, incl Air 190 8h (UK) 0700 002 959Eye-Tech 9-13, incl air CA 0700 002 891

EYE-TECH 9-13

The ESAB Eye-Tech 10-12 Select has a switch on the inside of the helmetfor easy adjustment between shade areas 10-11 and 11-12.

Eye-Tech 10-12 Select 0700 000 884Eye-Tech 10-12 prepared for fresh air 0700 002 924Eye-Tech 10-12 Select, incl Air 160 8h 0700 002 932Eye-Tech 10-12 Select, incl Air 160 (UK) 0700 002 960Eye-Tech 10-12 Select, incl Air 190 5h 0700 002 933Eye-Tech 10-12 Select, incl Air 190 5h (UK) 0700 002 961Eye-Tech 10-12 Select, incl Air 190 8h 0700 002 934Eye-Tech 10-12 Select, incl Air 190 8h (UK) 0700 002 962Eye-Tech 10-12 Select, incl Air CA 0700 002 894

EYE-TECH 10-12 SELECT

6 7

Page 119: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

8 9

The ESAB Ramatic welding helmet is suitable for the occasional welder. It is a robust and easy to use helmet which is powered by two replaceablebatteries. Once activated, shades ranging from 3 to 11 can be selected,allowing the helmet to be used for a wide range of MMA and MIG/MAGapplications. The cartridge can be supplied separately and can be used with other passive helmets such as the ESAB Albatross 90 x 110.

ESAB Ramatic 0700 000 899ESAB Ramatic cartridge 0700 000 044Battery incl. lid 0700 000 046Head gear 0366 833 882Glass holder 0467 930 001Ramatic helmet shell 0700 000 045Front/inner cover lens 0160 307 004

ESAB RAMATIC

This latest generation of auto darkening welding helmets has a reaction timeof just 1/20000th of a second and offers full UV and IR protection. The twinsolar powered lens unit offers a variable shade adjustment from 9 to 13,sensitivity adjustment and a variable delay from dark to light state. Shadeadjustment is by a rotary switch, conveniently located on the left of thehelmet. Lens viewing area 98mm x 47mm. Super lightweight and a fullyadjustable harness and anti-bacteria/anti-odour sweat band.

Murex 9-13 Multiweld Helmet 0701 416 393Cover Lens Multiweld Pk 10 0701 416 262Back Lens Multiweld Pk 10 0701 416 2639-13 Cartridge Multiweld 0701 416 264Sweat Band Multiweld 0701 416 266Murex Multiweld Shell 0701 502 390

MUREX MULTIWELD HELMET

The ESAB Albatross 1000 has a ‘flip up’ front in to which a welding glass is fitted. There is also a protective plasticlens that gives facial protection when the front is folded up. The Albatross Toughweld welding helmet is made of heat resistant polyester (up to 240 degrees Celsius), suitable for heavy duty welding. Welding glass 10 DIN included in all helmets.

Albatross 1000, 60 x 110 standard 0000 595 200Albatross 1000, 60 x 110 for protective helmet 0000 595 201Albatross 1000, 60 x 110 for fresh air 0000 595 202Albatross 1000, 60 x 110 for protective helmet and fresh air 0000 595 203Albatross Toughweld, 60 x 110 standard 0700 000 896Albatross Toughweld, 60 x 110 fresh air 0700 000 898Albatross 1000, 90 x 110 standard 0349 502 204Albatross 1000, 90 x 110 for protective helmet 0349 502 205Albatross 1000, 90 x 110 for fresh air 0349 502 206Albatross 1000, 90 x 110 for protective helmet and fresh air 0349 502 207

ALBATROSS 1000, 60 x 110 AND 90 x 110

The inner protective lens on the Albatross 2000 is a shade 2. The specially designed ‘flip up’ front is equipped with a60x110mm welding glass, however it is also possible to view the starting point of the weld through the viewing area.When the arc is struck the user can, by tilting the head, continue to see through the welding lens. Excellent whenprecision starting is essential. Welding glass 9 DIN included.

Albatross 2000 standard 0000 595 600Albatross 2000 for protective helmet 0000 595 601Albatross 2000 for fresh air 0000 595 602Albatross 2000 for protective helmet and fresh air 0000 595 603

ALBATROSS 2000

The Albatross series is a range of passive and very lightweight welding helmets. Albatross helmetsprovide a complete and flexible system, and can be fitted with hard hats, hearing protectors andfresh air units. The headgear is comfortable and adjustable and the helmets are delivered with chinprotection. CE approved.

ALBATROSS FAMILYDiopter holder 0700 000 030Diopter +1,0 0367 951 001Diopter +1,5 0367 951 002

Diopter +2,0 0367 951 003Diopter +2,5 0367 951 004

MAGNIFYING LENSES

Page 120: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

8 9

The ESAB Ramatic welding helmet is suitable for the occasional welder. It is a robust and easy to use helmet which is powered by two replaceablebatteries. Once activated, shades ranging from 3 to 11 can be selected,allowing the helmet to be used for a wide range of MMA and MIG/MAGapplications. The cartridge can be supplied separately and can be used with other passive helmets such as the ESAB Albatross 90 x 110.

ESAB Ramatic 0700 000 899ESAB Ramatic cartridge 0700 000 044Battery incl. lid 0700 000 046Head gear 0366 833 882Glass holder 0467 930 001Ramatic helmet shell 0700 000 045Front/inner cover lens 0160 307 004

ESAB RAMATIC

This latest generation of auto darkening welding helmets has a reaction timeof just 1/20000th of a second and offers full UV and IR protection. The twinsolar powered lens unit offers a variable shade adjustment from 9 to 13,sensitivity adjustment and a variable delay from dark to light state. Shadeadjustment is by a rotary switch, conveniently located on the left of thehelmet. Lens viewing area 98mm x 47mm. Super lightweight and a fullyadjustable harness and anti-bacteria/anti-odour sweat band.

Murex 9-13 Multiweld Helmet 0701 416 393Cover Lens Multiweld Pk 10 0701 416 262Back Lens Multiweld Pk 10 0701 416 2639-13 Cartridge Multiweld 0701 416 264Sweat Band Multiweld 0701 416 266Murex Multiweld Shell 0701 502 390

MUREX MULTIWELD HELMET

The ESAB Albatross 1000 has a ‘flip up’ front in to which a welding glass is fitted. There is also a protective plasticlens that gives facial protection when the front is folded up. The Albatross Toughweld welding helmet is made of heat resistant polyester (up to 240 degrees Celsius), suitable for heavy duty welding. Welding glass 10 DIN included in all helmets.

Albatross 1000, 60 x 110 standard 0000 595 200Albatross 1000, 60 x 110 for protective helmet 0000 595 201Albatross 1000, 60 x 110 for fresh air 0000 595 202Albatross 1000, 60 x 110 for protective helmet and fresh air 0000 595 203Albatross Toughweld, 60 x 110 standard 0700 000 896Albatross Toughweld, 60 x 110 fresh air 0700 000 898Albatross 1000, 90 x 110 standard 0349 502 204Albatross 1000, 90 x 110 for protective helmet 0349 502 205Albatross 1000, 90 x 110 for fresh air 0349 502 206Albatross 1000, 90 x 110 for protective helmet and fresh air 0349 502 207

ALBATROSS 1000, 60 x 110 AND 90 x 110

The inner protective lens on the Albatross 2000 is a shade 2. The specially designed ‘flip up’ front is equipped with a60x110mm welding glass, however it is also possible to view the starting point of the weld through the viewing area.When the arc is struck the user can, by tilting the head, continue to see through the welding lens. Excellent whenprecision starting is essential. Welding glass 9 DIN included.

Albatross 2000 standard 0000 595 600Albatross 2000 for protective helmet 0000 595 601Albatross 2000 for fresh air 0000 595 602Albatross 2000 for protective helmet and fresh air 0000 595 603

ALBATROSS 2000

The Albatross series is a range of passive and very lightweight welding helmets. Albatross helmetsprovide a complete and flexible system, and can be fitted with hard hats, hearing protectors andfresh air units. The headgear is comfortable and adjustable and the helmets are delivered with chinprotection. CE approved.

ALBATROSS FAMILYDiopter holder 0700 000 030Diopter +1,0 0367 951 001Diopter +1,5 0367 951 002

Diopter +2,0 0367 951 003Diopter +2,5 0367 951 004

MAGNIFYING LENSES

Page 121: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

10 11

The Albatross 3000 is a combination of a welding helmet and a grinding visor. The large panoramic window gives anexcellent overview and good protection whilst grinding. The welding visor can be supplied in different window sizes.Welding glass 10 DIN included.

Albatross 3000 standard 0349 502 200Albatross 3000 for protective helmet 0349 502 201Albatross 3000 for fresh air 0349 502 202Albatross 3000 for protective helmet and fresh air 0349 502 203Albatross 3000, 50 x 105 0349 502 208Albatross 3000, 90 x 110 0349 501 204

ALBATROSS 3000

1 Flip-up frame 60 x 110 0000 595 1521 Flip-up frame 90 x 110 0349 501 0842 Plastic cover lens 60 x 110 0160 307 0012 Plastic cover lens 90 x 110 0160 307 0043 Spring 60 x 110 0000 595 1533 Spring 90 x 110 0000 595 3834 Head gear 0000 500 5195 Spare parts for head gear 0000 500 5206 Air hose including adapter 0000 595 2397 Adapter 0349 501 0858 Air tight seal 0000 595 2169 Face seal including bib 0000 595 178

10 Welding lens DIN 10 0160 292 002

SPARES FOR ALBATROSS 1000 (Fig 1)

Albatross 1000, incl Air 160 8h 60 x 110 0700 002 941Albatross 1000, incl Air CA 60 x 110 0349 501 880Albatross 1000, incl protective helmet 60 x 110 0349 501 889Albatross 1000, incl protective helmet, hearing protectors 60 x 110 0349 501 888Albatross 1000, incl protective helmet, Air 160 8h 60 x 110 0700 002 946Albatross 1000, incl protective helmet, Air 160 8h, hearing protectors 60 x 110 0700 002 945Albatross 1000, incl protective helmet, Air CA 60 x 110 0349 501 891Albatross 1000, incl protective helmet, Air CA, hearing protectors 60 x 110 0349 501 890Albatross 1000, incl Air 160 8h 90 x 110 0700 002 942Albatross 1000, incl Air CA 90 x 110 0349 501 882Albatross 1000, incl protective helmet 90 x 110 0349 501 895Albatross 1000, incl protective helmet, hearing protectors 90 x 110 0349 501 894Albatross 1000, incl protective helmet, Air 160 8h 90 x 110 0700 002 948Albatross 1000, incl protective helmet, Air 160 8h, hearing protectors 90 x 110 0700 002 947Albatross 1000, incl protective helmet, Air CA 90 x 110 0349 501 897Albatross 1000, incl protective helmet, Air CA, hearing protectors 90 x 110 0349 501 896Albatross 2000, incl Air 160 8h 0700 002 943Albatross 2000, incl Air CA 0349 501 884Albatross 2000, incl protective helmet 0349 501 901Albatross 2000, incl protective helmet, hearing protectors 0349 501 900Albatross 2000, incl protective helmet, Air 160 8h 0700 002 950Albatross 2000, incl protective helmet, Air 160 8h, hearing protectors 0700 002 949Albatross 2000, incl protective helmet, Air CA 0349 501 903Albatross 2000, incl protective helmet, Air CA, hearing protectors 0349 501 902Albatross 3000, incl Air 160 8h 0700 002 944Albatross 3000, incl Air CA 0349 501 886Albatross 3000, incl protective helmet 0349 501 907Albatross 3000, incl protective helmet, hearing protectors 0349 501 906Albatross 3000, incl protective helmet, Air 160 8h 0700 002 952Albatross 3000, incl protective helmet, Air 160 8h, hearing protectors 0700 002 951Albatross 3000, incl protective helmet, Air CA 0349 501 909Albatross 3000, incl protective helmet, Air CA, hearing protectors 0349 501 908

ALBATROSS COMBINATIONS

SPARES FOR ALBATROSS 1000 Fig 1

Page 122: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

10 11

The Albatross 3000 is a combination of a welding helmet and a grinding visor. The large panoramic window gives anexcellent overview and good protection whilst grinding. The welding visor can be supplied in different window sizes.Welding glass 10 DIN included.

Albatross 3000 standard 0349 502 200Albatross 3000 for protective helmet 0349 502 201Albatross 3000 for fresh air 0349 502 202Albatross 3000 for protective helmet and fresh air 0349 502 203Albatross 3000, 50 x 105 0349 502 208Albatross 3000, 90 x 110 0349 501 204

ALBATROSS 3000

1 Flip-up frame 60 x 110 0000 595 1521 Flip-up frame 90 x 110 0349 501 0842 Plastic cover lens 60 x 110 0160 307 0012 Plastic cover lens 90 x 110 0160 307 0043 Spring 60 x 110 0000 595 1533 Spring 90 x 110 0000 595 3834 Head gear 0000 500 5195 Spare parts for head gear 0000 500 5206 Air hose including adapter 0000 595 2397 Adapter 0349 501 0858 Air tight seal 0000 595 2169 Face seal including bib 0000 595 178

10 Welding lens DIN 10 0160 292 002

SPARES FOR ALBATROSS 1000 (Fig 1)

Albatross 1000, incl Air 160 8h 60 x 110 0700 002 941Albatross 1000, incl Air CA 60 x 110 0349 501 880Albatross 1000, incl protective helmet 60 x 110 0349 501 889Albatross 1000, incl protective helmet, hearing protectors 60 x 110 0349 501 888Albatross 1000, incl protective helmet, Air 160 8h 60 x 110 0700 002 946Albatross 1000, incl protective helmet, Air 160 8h, hearing protectors 60 x 110 0700 002 945Albatross 1000, incl protective helmet, Air CA 60 x 110 0349 501 891Albatross 1000, incl protective helmet, Air CA, hearing protectors 60 x 110 0349 501 890Albatross 1000, incl Air 160 8h 90 x 110 0700 002 942Albatross 1000, incl Air CA 90 x 110 0349 501 882Albatross 1000, incl protective helmet 90 x 110 0349 501 895Albatross 1000, incl protective helmet, hearing protectors 90 x 110 0349 501 894Albatross 1000, incl protective helmet, Air 160 8h 90 x 110 0700 002 948Albatross 1000, incl protective helmet, Air 160 8h, hearing protectors 90 x 110 0700 002 947Albatross 1000, incl protective helmet, Air CA 90 x 110 0349 501 897Albatross 1000, incl protective helmet, Air CA, hearing protectors 90 x 110 0349 501 896Albatross 2000, incl Air 160 8h 0700 002 943Albatross 2000, incl Air CA 0349 501 884Albatross 2000, incl protective helmet 0349 501 901Albatross 2000, incl protective helmet, hearing protectors 0349 501 900Albatross 2000, incl protective helmet, Air 160 8h 0700 002 950Albatross 2000, incl protective helmet, Air 160 8h, hearing protectors 0700 002 949Albatross 2000, incl protective helmet, Air CA 0349 501 903Albatross 2000, incl protective helmet, Air CA, hearing protectors 0349 501 902Albatross 3000, incl Air 160 8h 0700 002 944Albatross 3000, incl Air CA 0349 501 886Albatross 3000, incl protective helmet 0349 501 907Albatross 3000, incl protective helmet, hearing protectors 0349 501 906Albatross 3000, incl protective helmet, Air 160 8h 0700 002 952Albatross 3000, incl protective helmet, Air 160 8h, hearing protectors 0700 002 951Albatross 3000, incl protective helmet, Air CA 0349 501 909Albatross 3000, incl protective helmet, Air CA, hearing protectors 0349 501 908

ALBATROSS COMBINATIONS

SPARES FOR ALBATROSS 1000 Fig 1

Page 123: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

12 13

1 Flip-up frame 60 x 110 0000 595 1521 Flip-up frame 90 x 110 0349 501 0842 Plastic cover lens 60 x 110 0160 307 0012 Plastic cover lens 90 x 110 0160 307 0043 Spring 60 x 110 0000 595 1533 Spring 90 x 110 0000 595 3834 Air hose including adapter 0000 595 2395 Adapter 0349 501 0856 Air tight seal 0000 595 2167 Face seal including bib 0000 595 1788 Welding lens DIN 10 0160 292 0029 Helmet adapter 0000 595 252

SPARES FOR ALBATROSS 1000 (Fig 2)

1 Flip-up frame 60 x 110 0000 595 3842 Protective lens DIN 2 0160 307 0053 Plastic cover lens 60 x 110 0160 307 0014 Spring 60 x 110 0000 595 1535 Spring 90 x 110 0000 595 3836 Head gear 0000 500 5197 Spare parts for head gear 0000 500 5208 Air hose including adapter 0000 595 2399 Adapter 0349 501 085

10 Air tight seal 0000 595 21611 Face seal including bib 0000 595 17812 Welding lens DIN 10 0160 292 002

SPARES FOR ALBATROSS 2000 (Fig 3)

SPARES FOR ALBATROSS 2000 Fig 3SPARES FOR ALBATROSS 1000 Fig 2

Page 124: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

12 13

1 Flip-up frame 60 x 110 0000 595 1521 Flip-up frame 90 x 110 0349 501 0842 Plastic cover lens 60 x 110 0160 307 0012 Plastic cover lens 90 x 110 0160 307 0043 Spring 60 x 110 0000 595 1533 Spring 90 x 110 0000 595 3834 Air hose including adapter 0000 595 2395 Adapter 0349 501 0856 Air tight seal 0000 595 2167 Face seal including bib 0000 595 1788 Welding lens DIN 10 0160 292 0029 Helmet adapter 0000 595 252

SPARES FOR ALBATROSS 1000 (Fig 2)

1 Flip-up frame 60 x 110 0000 595 3842 Protective lens DIN 2 0160 307 0053 Plastic cover lens 60 x 110 0160 307 0014 Spring 60 x 110 0000 595 1535 Spring 90 x 110 0000 595 3836 Head gear 0000 500 5197 Spare parts for head gear 0000 500 5208 Air hose including adapter 0000 595 2399 Adapter 0349 501 085

10 Air tight seal 0000 595 21611 Face seal including bib 0000 595 17812 Welding lens DIN 10 0160 292 002

SPARES FOR ALBATROSS 2000 (Fig 3)

SPARES FOR ALBATROSS 2000 Fig 3SPARES FOR ALBATROSS 1000 Fig 2

Page 125: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

14 15

1 Visor 60 x 110 0349 501 0812 Plastic cover lens 60 x 110 0160 307 0013 Spring 60 x 110 0000 595 1534 Cover glass Albatross 3000 0349 501 0825 Head gear 0000 500 5196 Spare parts for head gear 0000 500 5207 Air hose including adapter 0000 595 2398 Adapter 0349 501 0859 Air tight seal 0000 595 216

10 Face seal including bib 0000 595 17811 Welding lens DIN 10 0160 292 00212 Hinge set for visor 0700 000 048

SPARES FOR ALBATROSS 3000 (Fig 5)

1 Flip-up frame 60 x 110 0000 595 3842 Protective lens DIN 2 0160 307 0053 Plastic cover lens 60 x 110 0160 307 0014 Spring 60 x 110 0000 595 1535 Spring 90 x 110 0000 595 3836 Air hose including adapter 0000 595 2397 Adapter 0349 501 0858 Air tight seal 0000 595 2169 Face seal including bib 0000 595 178

10 Welding lens DIN 10 0160 292 00211 Helmet adapter 0000 595 252

SPARES FOR ALBATROSS 2000 (Fig 4)

SPARES FOR ALBATROSS 2000 Fig 4SPARES FOR ALBATROSS 3000 Fig 5

Page 126: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

14 15

1 Visor 60 x 110 0349 501 0812 Plastic cover lens 60 x 110 0160 307 0013 Spring 60 x 110 0000 595 1534 Cover glass Albatross 3000 0349 501 0825 Head gear 0000 500 5196 Spare parts for head gear 0000 500 5207 Air hose including adapter 0000 595 2398 Adapter 0349 501 0859 Air tight seal 0000 595 216

10 Face seal including bib 0000 595 17811 Welding lens DIN 10 0160 292 00212 Hinge set for visor 0700 000 048

SPARES FOR ALBATROSS 3000 (Fig 5)

1 Flip-up frame 60 x 110 0000 595 3842 Protective lens DIN 2 0160 307 0053 Plastic cover lens 60 x 110 0160 307 0014 Spring 60 x 110 0000 595 1535 Spring 90 x 110 0000 595 3836 Air hose including adapter 0000 595 2397 Adapter 0349 501 0858 Air tight seal 0000 595 2169 Face seal including bib 0000 595 178

10 Welding lens DIN 10 0160 292 00211 Helmet adapter 0000 595 252

SPARES FOR ALBATROSS 2000 (Fig 4)

SPARES FOR ALBATROSS 2000 Fig 4SPARES FOR ALBATROSS 3000 Fig 5

Page 127: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

16 17

Euromask is a helmet for welding and cutting that provides effectiveprotection from UV and IR radiation. The visor must always be down whenwelding. The large field of vision provides effective protection for the eyeswhen grinding. Euromask can be combined with various IR and UVprotectors. Also available with a protective helmet or prepared for use with a fresh air unit.

Euromask DIN 10 0000 500 501Euromask DIN 11 0000 500 500Euromask for protective helmet DIN 10 0349 501 913Euromask for protective helmet DIN 11 0349 501 912Euromask DIN 10 fresh air 0700 000 901Euromask DIN 11 fresh air 0700 000 902Chin cover 0000 500 522Visor DIN 5 0000 500 525Visor DIN 8 0000 500 514Visor Large DIN 8 0000 500 318Visor DIN 10 0000 500 515Visor large DIN 10 0349 501 088UV protector clear (inner glass) 0000 500 526UV protection DIN 1.7 (inner glass) 0000 500 512UV protection DIN 3 (inner glass) 0000 500 513UV protection DIN 5 (inner glass) 0000 500 524Visor frame 0000 500 511Head gear 0000 500 519Spare part for head gear 0000 500 520Hinge set for visor 0000 595 208

EUROMASK

1 Visor 60 x 110 0349 501 0812 Plastic cover lens 60 x 110 0160 307 0013 Spring 60 x 110 0000 595 1534 Cover glass Albatross 3000 0349 501 0825 Air hose including adapter 0000 595 2396 Adapter 0349 501 0857 Air tight seal 0000 595 2168 Face seal including bib 0000 595 1789 Welding lens DIN 10 0160 292 002

10 Helmet adapter 0000 595 25211 Hinge set for visor 0700 000 048

SPARES FOR ALBATROSS 3000 (Fig 6)

SPARES FOR ALBATROSS 3000 Fig 6

Auto-shade 10-11 60 x 110 0700 000 029Auto-shade 10-11 51 x 108 0700 000 032Diopter +1,0 0367 951 001Diopter +1,5 0367 951 002Diopter +2,0 0367 951 003Diopter +2,5 0367 951 004Headseal 0000 595 900

SPARE PARTS FOR ALBATROSS 1000, 2000 and 3000

This leather mask can be used when there is not enough space for weldingwith a conventional welding helmet. Glass size 90 x 110mm.

Leather mask 0000 593 221

LEATHER MASK

Page 128: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

16 17

Euromask is a helmet for welding and cutting that provides effectiveprotection from UV and IR radiation. The visor must always be down whenwelding. The large field of vision provides effective protection for the eyeswhen grinding. Euromask can be combined with various IR and UVprotectors. Also available with a protective helmet or prepared for use with a fresh air unit.

Euromask DIN 10 0000 500 501Euromask DIN 11 0000 500 500Euromask for protective helmet DIN 10 0349 501 913Euromask for protective helmet DIN 11 0349 501 912Euromask DIN 10 fresh air 0700 000 901Euromask DIN 11 fresh air 0700 000 902Chin cover 0000 500 522Visor DIN 5 0000 500 525Visor DIN 8 0000 500 514Visor Large DIN 8 0000 500 318Visor DIN 10 0000 500 515Visor large DIN 10 0349 501 088UV protector clear (inner glass) 0000 500 526UV protection DIN 1.7 (inner glass) 0000 500 512UV protection DIN 3 (inner glass) 0000 500 513UV protection DIN 5 (inner glass) 0000 500 524Visor frame 0000 500 511Head gear 0000 500 519Spare part for head gear 0000 500 520Hinge set for visor 0000 595 208

EUROMASK

1 Visor 60 x 110 0349 501 0812 Plastic cover lens 60 x 110 0160 307 0013 Spring 60 x 110 0000 595 1534 Cover glass Albatross 3000 0349 501 0825 Air hose including adapter 0000 595 2396 Adapter 0349 501 0857 Air tight seal 0000 595 2168 Face seal including bib 0000 595 1789 Welding lens DIN 10 0160 292 002

10 Helmet adapter 0000 595 25211 Hinge set for visor 0700 000 048

SPARES FOR ALBATROSS 3000 (Fig 6)

SPARES FOR ALBATROSS 3000 Fig 6

Auto-shade 10-11 60 x 110 0700 000 029Auto-shade 10-11 51 x 108 0700 000 032Diopter +1,0 0367 951 001Diopter +1,5 0367 951 002Diopter +2,0 0367 951 003Diopter +2,5 0367 951 004Headseal 0000 595 900

SPARE PARTS FOR ALBATROSS 1000, 2000 and 3000

This leather mask can be used when there is not enough space for weldingwith a conventional welding helmet. Glass size 90 x 110mm.

Leather mask 0000 593 221

LEATHER MASK

Page 129: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

18 19

Moon is an easy to use passive welding helmet suitable for the occasionalwelder. It is supplied with a DIN 10, 90 x 110 welding lens.

Moon helmet, 90 x 110mm 0700 000 894

MOON

A traditional short shell helmet made from high performance glass fibre.Weight 600 g. Lens aperture 108 x 83mm (41/4” x 31/4”).

SF11 0700 654 889Rubber glass holder Pk 5 0701 380 163Helmet head band foam Pk 10 0701 380 214Lens retaining nut Pk 5 0701 386 154Helmet head band foam Pk 10 (white) 0701 415 838

SF11 HELMET SHORT SHELL

A lightweight thermoplastic helmet weighing 420 g. Lens aperture 108 x 83mm (41/4” x 31/4”).

SF8 0701 380 430Rubber glass holder Pk 5 0701 380 163Helmet head band foam Pk 10 0701 380 214Lens retaining nut Pk 5 0701 386 154Helmet head band foam Pk 10 (white) 0701 415 838

SF8 LIGHTWEIGHT HELMET

A safe welding screen with replaceable welding glass, 60 x 110.

Welding screen E 0332 109 880

HAND SCREEN E

A safe welding screen that also protects the hand. Replaceable weldingglass, size 60 x 110mm. Weight 330g.

Welding screen H with clear and coloured glass 0160 294 880

HAND SCREEN H

Welding screen that protects the face as well as the hand. The window sizeis 90 x 110. Welding glass not included.

Welding screen Delta 0700 000 900

HAND SCREEN DELTA

Kursal 0000 915 000

HAND SCREEN KURSAL

Eco 0000 915 001

HAND SCREEN ECO

Page 130: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Helmets, Masks & Screens

18 19

Moon is an easy to use passive welding helmet suitable for the occasionalwelder. It is supplied with a DIN 10, 90 x 110 welding lens.

Moon helmet, 90 x 110mm 0700 000 894

MOON

A traditional short shell helmet made from high performance glass fibre.Weight 600 g. Lens aperture 108 x 83mm (41/4” x 31/4”).

SF11 0700 654 889Rubber glass holder Pk 5 0701 380 163Helmet head band foam Pk 10 0701 380 214Lens retaining nut Pk 5 0701 386 154Helmet head band foam Pk 10 (white) 0701 415 838

SF11 HELMET SHORT SHELL

A lightweight thermoplastic helmet weighing 420 g. Lens aperture 108 x 83mm (41/4” x 31/4”).

SF8 0701 380 430Rubber glass holder Pk 5 0701 380 163Helmet head band foam Pk 10 0701 380 214Lens retaining nut Pk 5 0701 386 154Helmet head band foam Pk 10 (white) 0701 415 838

SF8 LIGHTWEIGHT HELMET

A safe welding screen with replaceable welding glass, 60 x 110.

Welding screen E 0332 109 880

HAND SCREEN E

A safe welding screen that also protects the hand. Replaceable weldingglass, size 60 x 110mm. Weight 330g.

Welding screen H with clear and coloured glass 0160 294 880

HAND SCREEN H

Welding screen that protects the face as well as the hand. The window sizeis 90 x 110. Welding glass not included.

Welding screen Delta 0700 000 900

HAND SCREEN DELTA

Kursal 0000 915 000

HAND SCREEN KURSAL

Eco 0000 915 001

HAND SCREEN ECO

Page 131: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Respiratory Equipment

20 21

Deep shell fibre glass screen. Weighs 500g. Lens aperture 108 x 83mm(41/4” x 31/4”).

SF12 0700 654 890

HAND SCREEN SF12

Flat fronted fibreglass hand screen. Weight 600 g. Lens aperture 108 x 83mm (41/4” x 31/4”).

SF2 0700 655 002

HAND SCREEN SF2

ESAB always recommend the use of a full respiratory system for maximum protection againstwelding fume. For the ultimate protection and for use in the most aggressive of weldingenvironments, ESAB offer the Air 160 and Air 190 powered respiratory systems.

ESAB AIR

Eye-Tech 9-13/Air 160 0700 002 929Eye-Tech 9-13, incl Air 160 (UK) 0700 002 957Eye-Tech 10-12/Air 160 0700 002 932Eye-Tech 10-12 Select, incl Air 160 (UK) 0700 002 960Eye-Tech 10-11/Air 160 0700 002 935Eye-Tech 10/11 Mono, incl Air 160 (UK) 0700 002 963Eye-Tech 5-13/Air 160 0700 002 938Eye-Tech 5-13, incl Air 160 (UK) 0700 002 966

AIR UNITS - AIR 160 WITH EYE-TECH

The ESAB respiratory systems have been upgraded to increase the levels ofcomfort and safety for the welder. The Air 160 provides 160 litres of air perminute to give a more pleasant working environment. The unit only weighs 1kg but will still withstand the toughest of environments. The unit is suppliedwith a P3 filter with an extraordinary filtration capacity. The battery, whichhas an operating capacity of 8 hours, can be charged separate from themotor unit, hence it can be utilised when working double shifts. The Air 160can be used together with the Eye-Tech or the Albatross helmet.

The ESAB Air 160-8H Complete 0700 002 926 (EU), 0700 002 954 (UK)includes motor unit, 8 hour battery, charger, belt, comfort pad, one P3 filterand one pre-filter fitted.

ESAB AIR 160

Albatross 1000, 60X110/AIR 160 0700 002 941Albatross 1000, 90X110/AIR 160 0700 002 942Albatross 2000/AIR 160 0700 002 943Albatross 3000/AIR 160 0700 002 944Albatross 1000 60x110 + G2000c+ Air 160 + ear prot. 0700 002 945Albatross 1000 60x110 + G2000c + Air 160 0700 002 946Albatross 1000 90x110 + G2000c+ Air 160 + ear prot. 0700 002 947Albatross 1000 90x110 + G2000c + Air 160 0700 002 948Albatross 2000 + G2000c+ Air 160 + ear prot. 0700 002 949Albatross 2000 + G2000c + Air 160 0700 002 950Albatross 3000 60x110 + G2000c+ Air 160 + ear prot. 0700 002 951Albatross 3000 60x110 + G2000c + Air 160 0700 002 952

AIR UNITS - AIR 160 WITH ALBATROSS

Page 132: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Helmets, Masks & Screens Respiratory Equipment

20 21

Deep shell fibre glass screen. Weighs 500g. Lens aperture 108 x 83mm(41/4” x 31/4”).

SF12 0700 654 890

HAND SCREEN SF12

Flat fronted fibreglass hand screen. Weight 600 g. Lens aperture 108 x 83mm (41/4” x 31/4”).

SF2 0700 655 002

HAND SCREEN SF2

ESAB always recommend the use of a full respiratory system for maximum protection againstwelding fume. For the ultimate protection and for use in the most aggressive of weldingenvironments, ESAB offer the Air 160 and Air 190 powered respiratory systems.

ESAB AIR

Eye-Tech 9-13/Air 160 0700 002 929Eye-Tech 9-13, incl Air 160 (UK) 0700 002 957Eye-Tech 10-12/Air 160 0700 002 932Eye-Tech 10-12 Select, incl Air 160 (UK) 0700 002 960Eye-Tech 10-11/Air 160 0700 002 935Eye-Tech 10/11 Mono, incl Air 160 (UK) 0700 002 963Eye-Tech 5-13/Air 160 0700 002 938Eye-Tech 5-13, incl Air 160 (UK) 0700 002 966

AIR UNITS - AIR 160 WITH EYE-TECH

The ESAB respiratory systems have been upgraded to increase the levels ofcomfort and safety for the welder. The Air 160 provides 160 litres of air perminute to give a more pleasant working environment. The unit only weighs 1kg but will still withstand the toughest of environments. The unit is suppliedwith a P3 filter with an extraordinary filtration capacity. The battery, whichhas an operating capacity of 8 hours, can be charged separate from themotor unit, hence it can be utilised when working double shifts. The Air 160can be used together with the Eye-Tech or the Albatross helmet.

The ESAB Air 160-8H Complete 0700 002 926 (EU), 0700 002 954 (UK)includes motor unit, 8 hour battery, charger, belt, comfort pad, one P3 filterand one pre-filter fitted.

ESAB AIR 160

Albatross 1000, 60X110/AIR 160 0700 002 941Albatross 1000, 90X110/AIR 160 0700 002 942Albatross 2000/AIR 160 0700 002 943Albatross 3000/AIR 160 0700 002 944Albatross 1000 60x110 + G2000c+ Air 160 + ear prot. 0700 002 945Albatross 1000 60x110 + G2000c + Air 160 0700 002 946Albatross 1000 90x110 + G2000c+ Air 160 + ear prot. 0700 002 947Albatross 1000 90x110 + G2000c + Air 160 0700 002 948Albatross 2000 + G2000c+ Air 160 + ear prot. 0700 002 949Albatross 2000 + G2000c + Air 160 0700 002 950Albatross 3000 60x110 + G2000c+ Air 160 + ear prot. 0700 002 951Albatross 3000 60x110 + G2000c + Air 160 0700 002 952

AIR UNITS - AIR 160 WITH ALBATROSS

Page 133: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment Respiratory Equipment

22 23

Eye-Tech 9-13/Air 190 - 5H 0700 002 930Eye-Tech 9-13, incl Air 190 5h (UK) 0700 002 958Eye-Tech 9-13/Air 190 - 8H 0700 002 931Eye-Tech 9-13, incl Air 190 8h (UK) 0700 002 959Eye-Tech 10-12/Air 190 - 5H 0700 002 933Eye-Tech 10-12 Select, incl Air 190 5h (UK) 0700 002 961Eye-Tech 10-12/Air 190 - 8H 0700 002 934Eye-Tech 10-12 Select, incl Air 190 8h (UK) 0700 002 962Eye-Tech 10-11/Air 190 - 5H 0700 002 936Eye-Tech 10/11 Mono, incl Air 190 5h (UK) 0700 002 964Eye-Tech 10-11/Air 190 - 8H 0700 002 937Eye-Tech 10/11 Mono, incl Air 190 8h (UK) 0700 002 965Eye-Tech 5-13/Air 190 AL - 5H 0700 002 939Eye-Tech 5-13, incl Air 190 5h (UK) 0700 002 967Eye-Tech 5-13/Air 190 AL - 8H 0700 002 940Eye-Tech 5-13, incl Air 190 8h (UK) 0700 002 968

AIR UNITS - AIR 190 WITH EYE-TECH

SPARES FOR AIR 160/190 CONTINUED (Fig 7)

1 Upper seal 0700 002 0122 Air channel 0700 002 0023 Screws for air channel PK 2 0700 002 0284 Face seal Eye-Tech 0700 002 0195 Air hose Albatross 0700 002 0325 Air hose Eye-Tech 0468 127 0116 Velcro set 0700 002 0157 Comfort pad standard 0700 002 0217 Comfort pad large 0700 002 0228 Air 160 motor unit 0700 002 0428 Air 190 AL motor unit 0700 002 0439 P3 filter 0700 002 0249 P2 filter 0700 002 0189 Carbon P2 filter 0700 002 041

10 Pre filter Pk 5 0700 002 023

SPARES FOR AIR 160/190 (Fig 7)

The ESAB respiratory systems have been upgraded to increase the comfortand safety for the welder. The Air 190 provides 190 litres of air per minute togive a more pleasant working environment. The Air 190 is equipped with anaudible and a visible alarm that indicates when the filter is blocked and/orwhen the battery capacity is running low. When using the large battery theoperation time is 8 hours and the battery can be charged separate from themotor unit, hence it can be utilised when working double shifts. The unit issupplied with a P3 filter with an extraordinary filtration capacity.

The ESAB Air 190-5H Complete 0700 002 927 (EU) and 0700 002 955 (UK)includes motor unit, 5 hour battery, charger, belt, comfort pad, one P3 filterand one pre-filter fitted.

The ESAB Air 190-8H Complete 0700 002 928 (EU) and 0700 002 956 (UK)includes motor unit, 8 hour battery, charger, belt, comfort pad, one P3 filterand one pre-filter fitted.

ESAB AIR 190

SPARES FOR AIR 160/190 Fig 7

10 Carbon Pre filter Pk 10 0700 002 04011 Battery small 0700 002 01312 Battery charger small 2 Pin (Europe) 0700 002 02012 Battery charger small 3 Pin (UK) 0700 002 04412 Battery charger large 2 Pin (Europe) 0700 002 03112 Battery charger large 3 Pin (UK) 0700 002 04512 Intelligent charger 0701 416 20312 Five way intelligent charger 0701 416 13613 Waist belt 0700 002 02714 Holder for air channel 0700 002 02915 Battery large 0700 002 01416 Air 160 Complete 0700 002 92616 Air 160 Complete (UK) 0700 002 95416 Air 190 - 5h Complete 0700 002 92716 Air 190 - 5h Complete (UK) 0700 002 95516 Air 190 - 8h Complete 0700 002 92816 Air 190 - 8h Complete (UK) 0700 002 95617 Proban hose cover 0349 501 07118 Air flow indicator 0468 127 004

Back plate (not shown) 0701 502 396

Page 134: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment Respiratory Equipment

22 23

Eye-Tech 9-13/Air 190 - 5H 0700 002 930Eye-Tech 9-13, incl Air 190 5h (UK) 0700 002 958Eye-Tech 9-13/Air 190 - 8H 0700 002 931Eye-Tech 9-13, incl Air 190 8h (UK) 0700 002 959Eye-Tech 10-12/Air 190 - 5H 0700 002 933Eye-Tech 10-12 Select, incl Air 190 5h (UK) 0700 002 961Eye-Tech 10-12/Air 190 - 8H 0700 002 934Eye-Tech 10-12 Select, incl Air 190 8h (UK) 0700 002 962Eye-Tech 10-11/Air 190 - 5H 0700 002 936Eye-Tech 10/11 Mono, incl Air 190 5h (UK) 0700 002 964Eye-Tech 10-11/Air 190 - 8H 0700 002 937Eye-Tech 10/11 Mono, incl Air 190 8h (UK) 0700 002 965Eye-Tech 5-13/Air 190 AL - 5H 0700 002 939Eye-Tech 5-13, incl Air 190 5h (UK) 0700 002 967Eye-Tech 5-13/Air 190 AL - 8H 0700 002 940Eye-Tech 5-13, incl Air 190 8h (UK) 0700 002 968

AIR UNITS - AIR 190 WITH EYE-TECH

SPARES FOR AIR 160/190 CONTINUED (Fig 7)

1 Upper seal 0700 002 0122 Air channel 0700 002 0023 Screws for air channel PK 2 0700 002 0284 Face seal Eye-Tech 0700 002 0195 Air hose Albatross 0700 002 0325 Air hose Eye-Tech 0468 127 0116 Velcro set 0700 002 0157 Comfort pad standard 0700 002 0217 Comfort pad large 0700 002 0228 Air 160 motor unit 0700 002 0428 Air 190 AL motor unit 0700 002 0439 P3 filter 0700 002 0249 P2 filter 0700 002 0189 Carbon P2 filter 0700 002 041

10 Pre filter Pk 5 0700 002 023

SPARES FOR AIR 160/190 (Fig 7)

The ESAB respiratory systems have been upgraded to increase the comfortand safety for the welder. The Air 190 provides 190 litres of air per minute togive a more pleasant working environment. The Air 190 is equipped with anaudible and a visible alarm that indicates when the filter is blocked and/orwhen the battery capacity is running low. When using the large battery theoperation time is 8 hours and the battery can be charged separate from themotor unit, hence it can be utilised when working double shifts. The unit issupplied with a P3 filter with an extraordinary filtration capacity.

The ESAB Air 190-5H Complete 0700 002 927 (EU) and 0700 002 955 (UK)includes motor unit, 5 hour battery, charger, belt, comfort pad, one P3 filterand one pre-filter fitted.

The ESAB Air 190-8H Complete 0700 002 928 (EU) and 0700 002 956 (UK)includes motor unit, 8 hour battery, charger, belt, comfort pad, one P3 filterand one pre-filter fitted.

ESAB AIR 190

SPARES FOR AIR 160/190 Fig 7

10 Carbon Pre filter Pk 10 0700 002 04011 Battery small 0700 002 01312 Battery charger small 2 Pin (Europe) 0700 002 02012 Battery charger small 3 Pin (UK) 0700 002 04412 Battery charger large 2 Pin (Europe) 0700 002 03112 Battery charger large 3 Pin (UK) 0700 002 04512 Intelligent charger 0701 416 20312 Five way intelligent charger 0701 416 13613 Waist belt 0700 002 02714 Holder for air channel 0700 002 02915 Battery large 0700 002 01416 Air 160 Complete 0700 002 92616 Air 160 Complete (UK) 0700 002 95416 Air 190 - 5h Complete 0700 002 92716 Air 190 - 5h Complete (UK) 0700 002 95516 Air 190 - 8h Complete 0700 002 92816 Air 190 - 8h Complete (UK) 0700 002 95617 Proban hose cover 0349 501 07118 Air flow indicator 0468 127 004

Back plate (not shown) 0701 502 396

Page 135: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment Respiratory Equipment

24 25

The Murex Multiflow range of Powered Respiratory Systems comprises the Air Filter Unit, an AirHose and one of an approved range of Head Units to suit the application. Contaminated air isdrawn into the Air Filter Unit by a battery powered motorised fan and is filtered by being passedthrough the pre- filter and main filter. The clean air is then delivered to the Head Unit through the hose.

MUREX MULTIFLOW

Multiflow Air Unit with Visor (UK) 0701 500 061Multiflow Air Unit with Visor (EU) 0701 502 401Multiflow + Multiweld (UK) 0701 500 079Multiflow + Multiweld (EU) 0701 502 402Multiflow + Multiweld + Intel Char (UK) 0701 502 330Multiflow + Multiweld + Intel Char (EU) 0701 502 403Multiflow Unit Without Visor (UK) 0701 500 062Multiflow Unit Without Visor (EU) 0701 502 404Multiflow + Visor + Intel Charger (UK) 0701 502 329Multiflow + Visor + Intel Charger (EU) 0701 502 405

MUREX MULTIFLOW

1 Std Battery Charger (UK) 0701 416 4952 Std Battery Charger (EU) 0701 502 4063 Intelligent Battery Charger (UK) 0701 416 4964 Intelligent Battery Charger (EU) 0701 502 4077 Multiflowl Air Flow Indicator 0701 416 507

10 Multiflow Breathing Hose 0701 416 49711 Multiflow Belt With Buckles 0701 502 38512 Pre Filters Pk 3 0701 416 18513 Pre Filter Pk 10 0701 500 06314 P3 Filter with Odour Pk 5 0701 500 06615 Multiflow Unit without Visor (UK) 0701 500 06215 Multiflow Unit without Visor (EU) 0701 502 404

Multiflow Internal Set MACH 2A (not shown) 0701 416 498Multiflow Visor Peel Offs Pk 10 (not shown) 0701 416 499Intrenal Visor only Multiweld (not shown) 0701 416 500Multiflow Confort Bands Pk 10 (not shown) 0701 416 502Multiflow Head Harness (not shown) 0701 416 503Multiflow Face Seal (not shown) 0701 416 504Multiflow Hose Cover (not shown) 0701 416 505Multiflow Confort Belt (not shown) 0701 416 506

MUREX MULTIFLOW SPARES (Fig 8)

MUREX MULTIFLOW SPARES Fig 8

The ESAB Air CA is a unit for use with a breathable compressed air supply,suitable when the environment requires a high protection factor. The unit givesairflow of 250 l/min and it is kept constant. If the pressure drops an alarm willbe activated. The unit can be easily fitted to the Eye-Tech. A filtration bank isavailable, if you do not already have a breathable air supply.

ESAB Air CA regulator 0349 501 072Air supply connector 0701 416 718Filtration bank, framed 0701 416 183Filtration bank, wall mounted 0701 416 184Airline 10 meter 0701 416 188Coalescing Filter 0701 416 186Charcoal Filter 0701 416 187Pre Filter Pk 3 0701 416 185AirForce compressed air visor 0701 416 179Replacement visor 0701 416 180Face seal Pk 5 0701 416 181Visor covers Pk 50 0701 416 182

ESAB AIR CA

Page 136: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment Respiratory Equipment

24 25

The Murex Multiflow range of Powered Respiratory Systems comprises the Air Filter Unit, an AirHose and one of an approved range of Head Units to suit the application. Contaminated air isdrawn into the Air Filter Unit by a battery powered motorised fan and is filtered by being passedthrough the pre- filter and main filter. The clean air is then delivered to the Head Unit through the hose.

MUREX MULTIFLOW

Multiflow Air Unit with Visor (UK) 0701 500 061Multiflow Air Unit with Visor (EU) 0701 502 401Multiflow + Multiweld (UK) 0701 500 079Multiflow + Multiweld (EU) 0701 502 402Multiflow + Multiweld + Intel Char (UK) 0701 502 330Multiflow + Multiweld + Intel Char (EU) 0701 502 403Multiflow Unit Without Visor (UK) 0701 500 062Multiflow Unit Without Visor (EU) 0701 502 404Multiflow + Visor + Intel Charger (UK) 0701 502 329Multiflow + Visor + Intel Charger (EU) 0701 502 405

MUREX MULTIFLOW

1 Std Battery Charger (UK) 0701 416 4952 Std Battery Charger (EU) 0701 502 4063 Intelligent Battery Charger (UK) 0701 416 4964 Intelligent Battery Charger (EU) 0701 502 4077 Multiflowl Air Flow Indicator 0701 416 507

10 Multiflow Breathing Hose 0701 416 49711 Multiflow Belt With Buckles 0701 502 38512 Pre Filters Pk 3 0701 416 18513 Pre Filter Pk 10 0701 500 06314 P3 Filter with Odour Pk 5 0701 500 06615 Multiflow Unit without Visor (UK) 0701 500 06215 Multiflow Unit without Visor (EU) 0701 502 404

Multiflow Internal Set MACH 2A (not shown) 0701 416 498Multiflow Visor Peel Offs Pk 10 (not shown) 0701 416 499Intrenal Visor only Multiweld (not shown) 0701 416 500Multiflow Confort Bands Pk 10 (not shown) 0701 416 502Multiflow Head Harness (not shown) 0701 416 503Multiflow Face Seal (not shown) 0701 416 504Multiflow Hose Cover (not shown) 0701 416 505Multiflow Confort Belt (not shown) 0701 416 506

MUREX MULTIFLOW SPARES (Fig 8)

MUREX MULTIFLOW SPARES Fig 8

The ESAB Air CA is a unit for use with a breathable compressed air supply,suitable when the environment requires a high protection factor. The unit givesairflow of 250 l/min and it is kept constant. If the pressure drops an alarm willbe activated. The unit can be easily fitted to the Eye-Tech. A filtration bank isavailable, if you do not already have a breathable air supply.

ESAB Air CA regulator 0349 501 072Air supply connector 0701 416 718Filtration bank, framed 0701 416 183Filtration bank, wall mounted 0701 416 184Airline 10 meter 0701 416 188Coalescing Filter 0701 416 186Charcoal Filter 0701 416 187Pre Filter Pk 3 0701 416 185AirForce compressed air visor 0701 416 179Replacement visor 0701 416 180Face seal Pk 5 0701 416 181Visor covers Pk 50 0701 416 182

ESAB AIR CA

Page 137: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment Lenses, Spectacles, Goggles & Visors

26 27

An alternative range of moulded disposable respiratory protection maskswith electrostatic filter media for low breathing resistance and a preformednose bridge for maximum comfort. Conform to EN149:2001.

3030V 0701 500 0763020V 0701 500 077

ALPHA MASKS

Eye-Tech 5-13 prepared for fresh air 0700 002 922Eye-Tech 9-13 prepared for fresh air 0700 002 923Eye-Tech 10-12 prepared for fresh air 0700 002 924Eye-Tech 10-11 prepared for fresh air 0700 002 925Grinding/Spraying Helmet complete with hose 0701 416 189Visor Covers Pk 50 0701 416 182Hearing Protection for 0701 416 189 0701 416 200Replacement Visor for 0701 416 189 0701 416 233Face Seal Pk5 for 0701 416 189 0701 416 234Green Triacetate Visor Shade 5 0701 500 000

HELMETS FOR COMPRESSED AIR

The DM series of disposable masks are high quality filtering face masks, whichgive maximum filtration efficiency and minimum breathing resistance for wearercomfort and acceptance. All models have a fully adjustable nose clip foroptimal fit and the headbands are latex free to minimise any allergic reaction.

The DM 106X, DM 106XC and DM 112X are all equipped with exhalationvalves to reduce heat and humidity.

The DM 106XC offers nuisance relief against ozone gas and welding fumesgenerated by welding operations e.g. MIG, MAG, TIG, MMA, Flux Core, Arc Gouging.

The DM range of FFPs meet the requirements of EN 149:2001 and are CE-marked in accordance with the requirements of European Directive89/686/EEC.

DISPOSABLE MASKS

Traditional glass filter lenses of excellent UV- and IR protection and thermalstability. Solid glass lenses are not robust and must be used with apolycarbonate backing lens and a glass- or plastic cover lens.

Filter Lens 98 x 75 shade 9 Pk 25 0000 915 059Filter Lens 98 x 75 shade 10 Pk 25 0000 904 305Filter Lens 98 x 75 shade 11 Pk 25 0000 915 060Filter Lens 98 x 75 shade 12 Pk 25 0000 915 061Filter Lens 98 x 75 shade 13 Pk 25 0000 915 062Filter Lens 60 x 110 shade 9 Pk 25 0160 292 001Filter Lens 60 x 110 shade 10 Pk 25 0160 292 002Filter Lens 60 x 110 shade 11 Pk 25 0160 292 003Filter Lens 60 x 110 shade 12 Pk 25 0160 292 004Filter Lens 60 x 110 shade 13 Pk 25 0160 292 005Filter Lens 90 x 110 shade 9 Pk 25 0760 031 631Filter Lens 90 x 110 shade 10 Pk 25 0760 031 632Filter Lens 90 x 110 shade 11 Pk 25 0760 031 633Filter Lens 90 x 110 shade 12 Pk 25 0760 031 634Filter Lens 90 x 110 shade 13 Pk 25 0760 031 635Filter Lens 50 x 105 shade 9 Pk 25 0590 028 216Filter Lens 50 x 105 shade 10 Pk 25 0590 028 217Filter Lens 50 x 105 shade 11 Pk 25 0590 028 218Filter Lens 50 x 105 shade 12 Pk 25 0590 028 219Filter Lens 50 x 105 shade 13 Pk 25 0590 028 220Filter Lens 51 x 108 shade 9 Pk 25 0760 031 601Filter Lens 51 x 108 shade 10 Pk 25 0760 031 602Filter Lens 51 x 108 shade 11 Pk 25 0760 031 603Filter Lens 51 x 108 shade 12 Pk 25 0760 031 604Filter Lens 51 x 108 shade 13 Pk 25 0760 031 605Filter Lens 50mm Diameter Shade 3 0000 665 603Filter Lens 50mm Diameter Shade 4 0000 665 604Filter Lens 50mm Diameter Shade 5 0000 665 605Filter Lens 50mm Diameter Shade 6 0000 665 606Filter Lens 50mm Diameter Shade 7 0000 665 607Filter Lens 50mm Diameter Shade 8 0000 665 608Filter Lens 50mm Diameter Shade 9 0000 665 609Filter Lens 50mm Diameter Shade 10 0000 665 610Filter Lens 50mm Diameter Shade 11 0000 665 611Filter Lens 50mm Diameter Shade 12 0000 665 612Filter Lens 8EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 367Filter Lens 9EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 369Filter Lens 10EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 371Filter Lens 11EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 373Filter Lens 12EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 375Filter Lens 13EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 376

FILTER LENSES

0701 416 021 0701 416 024 0701 416 025 0701 416 027 0701 416 028DM 105 DM 106 DM 106X DM 106XC DM 112

FFP1 FFP2 FFP2 FFP2 FFP3None valved None valved Valved Valved Valved

Dust X X X X XDust/Mist X X X X XMetal fume XOil based particulates X X X X XHigh concentration particulates X X X X

Acid gas nuisanceOdour nuisance XWeld fume XOzone nuisance X

Page 138: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Respiratory Equipment Lenses, Spectacles, Goggles & Visors

26 27

An alternative range of moulded disposable respiratory protection maskswith electrostatic filter media for low breathing resistance and a preformednose bridge for maximum comfort. Conform to EN149:2001.

3030V 0701 500 0763020V 0701 500 077

ALPHA MASKS

Eye-Tech 5-13 prepared for fresh air 0700 002 922Eye-Tech 9-13 prepared for fresh air 0700 002 923Eye-Tech 10-12 prepared for fresh air 0700 002 924Eye-Tech 10-11 prepared for fresh air 0700 002 925Grinding/Spraying Helmet complete with hose 0701 416 189Visor Covers Pk 50 0701 416 182Hearing Protection for 0701 416 189 0701 416 200Replacement Visor for 0701 416 189 0701 416 233Face Seal Pk5 for 0701 416 189 0701 416 234Green Triacetate Visor Shade 5 0701 500 000

HELMETS FOR COMPRESSED AIR

The DM series of disposable masks are high quality filtering face masks, whichgive maximum filtration efficiency and minimum breathing resistance for wearercomfort and acceptance. All models have a fully adjustable nose clip foroptimal fit and the headbands are latex free to minimise any allergic reaction.

The DM 106X, DM 106XC and DM 112X are all equipped with exhalationvalves to reduce heat and humidity.

The DM 106XC offers nuisance relief against ozone gas and welding fumesgenerated by welding operations e.g. MIG, MAG, TIG, MMA, Flux Core, Arc Gouging.

The DM range of FFPs meet the requirements of EN 149:2001 and are CE-marked in accordance with the requirements of European Directive89/686/EEC.

DISPOSABLE MASKS

Traditional glass filter lenses of excellent UV- and IR protection and thermalstability. Solid glass lenses are not robust and must be used with apolycarbonate backing lens and a glass- or plastic cover lens.

Filter Lens 98 x 75 shade 9 Pk 25 0000 915 059Filter Lens 98 x 75 shade 10 Pk 25 0000 904 305Filter Lens 98 x 75 shade 11 Pk 25 0000 915 060Filter Lens 98 x 75 shade 12 Pk 25 0000 915 061Filter Lens 98 x 75 shade 13 Pk 25 0000 915 062Filter Lens 60 x 110 shade 9 Pk 25 0160 292 001Filter Lens 60 x 110 shade 10 Pk 25 0160 292 002Filter Lens 60 x 110 shade 11 Pk 25 0160 292 003Filter Lens 60 x 110 shade 12 Pk 25 0160 292 004Filter Lens 60 x 110 shade 13 Pk 25 0160 292 005Filter Lens 90 x 110 shade 9 Pk 25 0760 031 631Filter Lens 90 x 110 shade 10 Pk 25 0760 031 632Filter Lens 90 x 110 shade 11 Pk 25 0760 031 633Filter Lens 90 x 110 shade 12 Pk 25 0760 031 634Filter Lens 90 x 110 shade 13 Pk 25 0760 031 635Filter Lens 50 x 105 shade 9 Pk 25 0590 028 216Filter Lens 50 x 105 shade 10 Pk 25 0590 028 217Filter Lens 50 x 105 shade 11 Pk 25 0590 028 218Filter Lens 50 x 105 shade 12 Pk 25 0590 028 219Filter Lens 50 x 105 shade 13 Pk 25 0590 028 220Filter Lens 51 x 108 shade 9 Pk 25 0760 031 601Filter Lens 51 x 108 shade 10 Pk 25 0760 031 602Filter Lens 51 x 108 shade 11 Pk 25 0760 031 603Filter Lens 51 x 108 shade 12 Pk 25 0760 031 604Filter Lens 51 x 108 shade 13 Pk 25 0760 031 605Filter Lens 50mm Diameter Shade 3 0000 665 603Filter Lens 50mm Diameter Shade 4 0000 665 604Filter Lens 50mm Diameter Shade 5 0000 665 605Filter Lens 50mm Diameter Shade 6 0000 665 606Filter Lens 50mm Diameter Shade 7 0000 665 607Filter Lens 50mm Diameter Shade 8 0000 665 608Filter Lens 50mm Diameter Shade 9 0000 665 609Filter Lens 50mm Diameter Shade 10 0000 665 610Filter Lens 50mm Diameter Shade 11 0000 665 611Filter Lens 50mm Diameter Shade 12 0000 665 612Filter Lens 8EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 367Filter Lens 9EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 369Filter Lens 10EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 371Filter Lens 11EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 373Filter Lens 12EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 375Filter Lens 13EW 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 376

FILTER LENSES

0701 416 021 0701 416 024 0701 416 025 0701 416 027 0701 416 028DM 105 DM 106 DM 106X DM 106XC DM 112

FFP1 FFP2 FFP2 FFP2 FFP3None valved None valved Valved Valved Valved

Dust X X X X XDust/Mist X X X X XMetal fume XOil based particulates X X X X XHigh concentration particulates X X X X

Acid gas nuisanceOdour nuisance XWeld fume XOzone nuisance X

Page 139: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Lenses, Spectacles, Goggles & Visors Lenses, Spectacles, Goggles & Visors

28 29

Laminated solid glass lenses have all the benefits of traditional glass, but arealso robust. Laminated lenses can be used with a standard glass or plasticcover lenses and do not need a backing plate. They have excellent thermalstability and are particularly suitable for high amperage and over head work.

Filter Lens Lam 9EW 108 x 51 (41/4” x 2”) Pair 0701 413 193Filter Lens Lam 10EW 108 x 51 (41/4” x 2”) Pair 0701 413 194Filter Lens Lam 11EW 108 x 51 (41/4” x 2”) Pair 0701 413 165Filter Lens Lam 12EW 108 x 51 (41/4” x 2”) Pair 0701 413 196Filter Lens Lam 13EW 108 x 51 (41/4” x 2”) Pair 0701 413 197Filter Lens Lam 9EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 994Filter Lens Lam 10EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 995Filter Lens Lam 11EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 210Filter Lens Lam 12EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 996Filter Lens Lam 13EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 997Filter Lens Lam 3GWF 50mm Pk 2 0701 414 020Filter Lens Lam 4GWF 50mm Pk 2 0701 414 021Filter Lens Lam 5GWF 50mm Pk 2 0701 414 022Filter Lens Lam 6GWF 50mm Pk 2 0701 414 023

LAMINATED FILTER LENSES

All filters must use a suitable cover lens to protect the filter lens from spatterand damage.

Cover Lens 98 x 75 glass Pk 100 0000 915 058Cover Lens 98 x 75 plastic Pk 100 0000 915 097Cover Lens 60 x 110 glass Pk 25 0291 102 701Cover Lens 60 x 110 plastic Pk 100 0160 307 001Cover Lens 90 x 110 glass Pk 100 0760 031 040Cover Lens 90 x 110 plastic Pk 100 0160 307 004Cover Lens 51 x 108 (41/4” x 2”) glass Pk 25 0760 031 010Cover Lens 51 x 108 (41/4” x 2”) plastic Pk 100 0160 307 002Cover Lens 50 x 105 glass Pk 100 0590 028 221Cover Lens 50 x 105 plastic Pk 100 0590 028 222Cover Lens Diameter 50mm glass Pk 50 0000 665 600Cover Lens Diameter 50mm plastic Pk 50 0000 665 618Cover Lens CR39 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 350Cover Lens CR39 108 x 83 (41/4” x 31/4”) Pk 100 0701 416 351Cover Lens Glass 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 341Cover Lens Lam 108 x 51 (41/4” x 2”) Pair 0701 413 198Cover Lens Lam 108 x 83 (41/4” x 31/4”) Pair 0701 413 211

COVER LENSES

When using non-robust filter lenses it is necessary to fit a suitable robustbacking lens to protect the welder’s eyes. Polycarbonate backing lensesprovide this protection.

Back Lens 108 x 51 (41/4” x 2”) Pk 10 0701 416 330Back Lens 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 332Back Lens 60 x 110 Pk 10 0701 416 334Back Lens 90 x 110 Pk 10 0701 416 336

POLYCARBONATE BACKING LENSES

Stylish spectacles for drilling, chipping and metalworking. The specialabrasion-resistant lenses are suitable for high ambient light conditions, but can still be used in lower ambient light conditions thanks to the lightlyshaded lens. The wrap around shape gives good coverage to the eye. CE approved according to EN 166-F. Also available with a clear lens.

Mercury indoor/outdoor 0701 415 943Mercury clear 0700 012 009

MERCURY INDOOR/OUTDOOR SPECTACLES

Stylish spectacles for drilling, chipping and metalworking. The specialabrasion-resistant blue lenses are suitable for high ambient light conditions.The wrap around shape gives good coverage to the eye. CE approvedaccording to EN 166-F.

Mercury blue 0701 415 936

MERCURY BLUE SPECTACLES

Spectral Filter Lens 4GWF Pk5 0701 380 228Spectral Filter Lens 5GWF Pk5 0701 380 161Spectral Filter Lens 6GWF Pk5 0701 380 162

FILTER LENS PACK OF 5 FOR SPECTRAL GOGGLE

Page 140: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Lenses, Spectacles, Goggles & Visors Lenses, Spectacles, Goggles & Visors

28 29

Laminated solid glass lenses have all the benefits of traditional glass, but arealso robust. Laminated lenses can be used with a standard glass or plasticcover lenses and do not need a backing plate. They have excellent thermalstability and are particularly suitable for high amperage and over head work.

Filter Lens Lam 9EW 108 x 51 (41/4” x 2”) Pair 0701 413 193Filter Lens Lam 10EW 108 x 51 (41/4” x 2”) Pair 0701 413 194Filter Lens Lam 11EW 108 x 51 (41/4” x 2”) Pair 0701 413 165Filter Lens Lam 12EW 108 x 51 (41/4” x 2”) Pair 0701 413 196Filter Lens Lam 13EW 108 x 51 (41/4” x 2”) Pair 0701 413 197Filter Lens Lam 9EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 994Filter Lens Lam 10EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 995Filter Lens Lam 11EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 210Filter Lens Lam 12EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 996Filter Lens Lam 13EW 108 x 83 (41/4” x 31/4”) Pair 0701 413 997Filter Lens Lam 3GWF 50mm Pk 2 0701 414 020Filter Lens Lam 4GWF 50mm Pk 2 0701 414 021Filter Lens Lam 5GWF 50mm Pk 2 0701 414 022Filter Lens Lam 6GWF 50mm Pk 2 0701 414 023

LAMINATED FILTER LENSES

All filters must use a suitable cover lens to protect the filter lens from spatterand damage.

Cover Lens 98 x 75 glass Pk 100 0000 915 058Cover Lens 98 x 75 plastic Pk 100 0000 915 097Cover Lens 60 x 110 glass Pk 25 0291 102 701Cover Lens 60 x 110 plastic Pk 100 0160 307 001Cover Lens 90 x 110 glass Pk 100 0760 031 040Cover Lens 90 x 110 plastic Pk 100 0160 307 004Cover Lens 51 x 108 (41/4” x 2”) glass Pk 25 0760 031 010Cover Lens 51 x 108 (41/4” x 2”) plastic Pk 100 0160 307 002Cover Lens 50 x 105 glass Pk 100 0590 028 221Cover Lens 50 x 105 plastic Pk 100 0590 028 222Cover Lens Diameter 50mm glass Pk 50 0000 665 600Cover Lens Diameter 50mm plastic Pk 50 0000 665 618Cover Lens CR39 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 350Cover Lens CR39 108 x 83 (41/4” x 31/4”) Pk 100 0701 416 351Cover Lens Glass 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 341Cover Lens Lam 108 x 51 (41/4” x 2”) Pair 0701 413 198Cover Lens Lam 108 x 83 (41/4” x 31/4”) Pair 0701 413 211

COVER LENSES

When using non-robust filter lenses it is necessary to fit a suitable robustbacking lens to protect the welder’s eyes. Polycarbonate backing lensesprovide this protection.

Back Lens 108 x 51 (41/4” x 2”) Pk 10 0701 416 330Back Lens 108 x 83 (41/4” x 31/4”) Pk 10 0701 416 332Back Lens 60 x 110 Pk 10 0701 416 334Back Lens 90 x 110 Pk 10 0701 416 336

POLYCARBONATE BACKING LENSES

Stylish spectacles for drilling, chipping and metalworking. The specialabrasion-resistant lenses are suitable for high ambient light conditions, but can still be used in lower ambient light conditions thanks to the lightlyshaded lens. The wrap around shape gives good coverage to the eye. CE approved according to EN 166-F. Also available with a clear lens.

Mercury indoor/outdoor 0701 415 943Mercury clear 0700 012 009

MERCURY INDOOR/OUTDOOR SPECTACLES

Stylish spectacles for drilling, chipping and metalworking. The specialabrasion-resistant blue lenses are suitable for high ambient light conditions.The wrap around shape gives good coverage to the eye. CE approvedaccording to EN 166-F.

Mercury blue 0701 415 936

MERCURY BLUE SPECTACLES

Spectral Filter Lens 4GWF Pk5 0701 380 228Spectral Filter Lens 5GWF Pk5 0701 380 161Spectral Filter Lens 6GWF Pk5 0701 380 162

FILTER LENS PACK OF 5 FOR SPECTRAL GOGGLE

Page 141: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Lenses, Spectacles, Goggles & Visors Lenses, Spectacles, Goggles & Visors

30 31

Protective spectacles for drilling, chipping and metalworking. They aredesigned and styled to provide maximum coverage for the eye. TellusSodium has an anti-mist lens that is especially suitable for low ambient lightconditions and it gives the user unobscured peripheral vision. CE approvedaccording to EN 166-F.

Tellus Sodium 0701 415 935

TELLUS SODIUM SPECTACLES

Spectacles for drilling, chipping and metalworking. The wrap around shapegives maximum coverage to the eye. These spectacles have adjustabletemple arms and abrasion-resistant lenses. CE approved according to EN 166-F.

Venus clear 0700 012 005

VENUS CLEAR SPECTACLES

Spectacles with shade 5 for welding inspection, profiling and brazing. Thewrap around shape gives maximum coverage to the eye. These spectacleshave adjustable temple arms and abrasion-resistant lenses. CE approvedaccording to EN 166-F and EN 175.

Venus shade 5 0700 012 006

VENUS SHADE 5 SPECTACLES

Spectacles for drilling, chipping and metalworking. They are available with aclear lens, features include the positive ratchet adjustment, slide-adjusttemples and comfort tips. CE approved according to EN 166-F.

Jupiter clear 0700 012 003

JUPITER CLEAR SPECTACLES

Visitor’s spectacles ideal for occasional use. They have a clear polycarbonatelens and ventilated side-arms. CE approved according to EN 166-F.

Mars 0701 414 786

MARS SPECTACLES

Protective spectacles in shade 5 for welding inspection, profiling andbrazing. The spectacles are equipped with abrasion-resistant lenses andadjustable temple arms. CE approved according to EN 166/EN 175.

Saturn shade 5 0701 362 182

SATURN SHADE 5 SPECTACLES

Protective spectacles for drilling, chipping and metalworking. The spectaclesare equipped with abrasion-resistant lenses and adjustable temple arms. CE approved according to EN 166.

Saturn clear 0701 362 181

SATURN CLEAR SPECTACLES

Protective goggles with optimum coverage for the eye. Suitable for gaswelding, brazing and gas cutting. CE approved according to EN 175.

Uranus 0700 012 002

URANUS GOGGLES

Page 142: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Lenses, Spectacles, Goggles & Visors Lenses, Spectacles, Goggles & Visors

30 31

Protective spectacles for drilling, chipping and metalworking. They aredesigned and styled to provide maximum coverage for the eye. TellusSodium has an anti-mist lens that is especially suitable for low ambient lightconditions and it gives the user unobscured peripheral vision. CE approvedaccording to EN 166-F.

Tellus Sodium 0701 415 935

TELLUS SODIUM SPECTACLES

Spectacles for drilling, chipping and metalworking. The wrap around shapegives maximum coverage to the eye. These spectacles have adjustabletemple arms and abrasion-resistant lenses. CE approved according to EN 166-F.

Venus clear 0700 012 005

VENUS CLEAR SPECTACLES

Spectacles with shade 5 for welding inspection, profiling and brazing. Thewrap around shape gives maximum coverage to the eye. These spectacleshave adjustable temple arms and abrasion-resistant lenses. CE approvedaccording to EN 166-F and EN 175.

Venus shade 5 0700 012 006

VENUS SHADE 5 SPECTACLES

Spectacles for drilling, chipping and metalworking. They are available with aclear lens, features include the positive ratchet adjustment, slide-adjusttemples and comfort tips. CE approved according to EN 166-F.

Jupiter clear 0700 012 003

JUPITER CLEAR SPECTACLES

Visitor’s spectacles ideal for occasional use. They have a clear polycarbonatelens and ventilated side-arms. CE approved according to EN 166-F.

Mars 0701 414 786

MARS SPECTACLES

Protective spectacles in shade 5 for welding inspection, profiling andbrazing. The spectacles are equipped with abrasion-resistant lenses andadjustable temple arms. CE approved according to EN 166/EN 175.

Saturn shade 5 0701 362 182

SATURN SHADE 5 SPECTACLES

Protective spectacles for drilling, chipping and metalworking. The spectaclesare equipped with abrasion-resistant lenses and adjustable temple arms. CE approved according to EN 166.

Saturn clear 0701 362 181

SATURN CLEAR SPECTACLES

Protective goggles with optimum coverage for the eye. Suitable for gaswelding, brazing and gas cutting. CE approved according to EN 175.

Uranus 0700 012 002

URANUS GOGGLES

Page 143: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Lenses, Spectacles, Goggles & Visors Lenses, Spectacles, Goggles & Visors

32 33

A sturdy goggle with 50mm dia polycarbonate lense in clear and shade 5.Approved to EN 175/EN 166-F.

Protex Clear 0001 813 202Protex 5 DIN 0001 813 203

PROTEX GOGGLES

Suitable for grinding and chipping. Soft PVC frame and polycarbonate antimist lens. Provides protection against liquid splashes, dusts and spatter.

Pluto 0701 414 790

PLUTO GOGGLES

Protective goggles shade 5, for gas welding, brazing and gas cutting.Neptune is ventilated and has a flip-front mechanism. CE approvedaccording to EN 175/EN 166-F.

Neptune 0701 548 800

NEPTUNE GOGGLES

A rigid cup type goggle with nose protection indirect ventilation and 50mmlenses. Comprises of one pair of shade 4 lenses, one pair of shade 6 lenses,goggle frame, two pairs of clear cover lenses and a spare nose piecesupplied in a sturdy plastic case.

FG1 Bocal 0700 110 327

FG1 BOCAL GOGGLES

A one piece goggle with a soft moulded body indirect ventilation and a 108 x 51 (41/4” x 2”) lens aperture. Fitted with a shade 4 filter and will fit overprescription spectacles.

Spectral 0700 153 594Spectral flip front shade 5 0701 380 452

SPECTRAL GOGGLES

A soft frame one piece goggle with panoramic lens giving a wide field ofvision. Fits over prescription spectacles fitted with a shade 5 filter.

Ski welding goggle 0701 380 436

SKI WELDING GOGGLES

Suitable for grinding and chipping. Soft PVC frame and polycarbonate antimist lens. Provides protection against liquid splashes, dusts and spatter.

Universal goggle 0701 380 490

UNIVERSAL GOGGLES

A strong lightweight browguard featuring an adjustable head harness andclear polycarbonate screen (200mm) in shade 5 or clear anti glare screen

Grinding visor clear complete 0000 595 303Replacement visor clear 0700 012 007Replacement visor shade 5 0700 012 008

GRINDING VISOR

Page 144: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Lenses, Spectacles, Goggles & Visors Lenses, Spectacles, Goggles & Visors

32 33

A sturdy goggle with 50mm dia polycarbonate lense in clear and shade 5.Approved to EN 175/EN 166-F.

Protex Clear 0001 813 202Protex 5 DIN 0001 813 203

PROTEX GOGGLES

Suitable for grinding and chipping. Soft PVC frame and polycarbonate antimist lens. Provides protection against liquid splashes, dusts and spatter.

Pluto 0701 414 790

PLUTO GOGGLES

Protective goggles shade 5, for gas welding, brazing and gas cutting.Neptune is ventilated and has a flip-front mechanism. CE approvedaccording to EN 175/EN 166-F.

Neptune 0701 548 800

NEPTUNE GOGGLES

A rigid cup type goggle with nose protection indirect ventilation and 50mmlenses. Comprises of one pair of shade 4 lenses, one pair of shade 6 lenses,goggle frame, two pairs of clear cover lenses and a spare nose piecesupplied in a sturdy plastic case.

FG1 Bocal 0700 110 327

FG1 BOCAL GOGGLES

A one piece goggle with a soft moulded body indirect ventilation and a 108 x 51 (41/4” x 2”) lens aperture. Fitted with a shade 4 filter and will fit overprescription spectacles.

Spectral 0700 153 594Spectral flip front shade 5 0701 380 452

SPECTRAL GOGGLES

A soft frame one piece goggle with panoramic lens giving a wide field ofvision. Fits over prescription spectacles fitted with a shade 5 filter.

Ski welding goggle 0701 380 436

SKI WELDING GOGGLES

Suitable for grinding and chipping. Soft PVC frame and polycarbonate antimist lens. Provides protection against liquid splashes, dusts and spatter.

Universal goggle 0701 380 490

UNIVERSAL GOGGLES

A strong lightweight browguard featuring an adjustable head harness andclear polycarbonate screen (200mm) in shade 5 or clear anti glare screen

Grinding visor clear complete 0000 595 303Replacement visor clear 0700 012 007Replacement visor shade 5 0700 012 008

GRINDING VISOR

Page 145: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

34 35

ESAB’s hearing protectors are available in five different versions; One thatcan be attached to a protective helmet, one with neck support, one withhead support and finally an economy head support version. All of theseprovide effective protection at different decibel levels. A range of highperformance disposable ear plugs is also available.

Hearing protector with neck support 0700 001 880Hearing protector with head support 0000 595 199Hearing protector for G22c 0367 420 002Hearing protector for G2000c, yellow 0367 420 003

Economy ear defender 0701 380 477Ear plugs Pk 200 (not shown) 0700 001 001Ear plugs Pk 100 corded (not shown) 0700 001 002

HEARING PROTECTION

The G2000c and the G22c are high quality protective helmets suitable foruse as an individual hard hat or in combination with the Albatross (G2000c)and the Euromask (G22c). The helmets are equipped with adjustableheadgears and can also be fitted with hearing protection.

Hard hat G2000c 0468 051 881Hard hat G22c 0468 051 880

HARD HATS

The hard hat for Eye-Tech is designed to give good balance when wornseparately as well as when worn with any of the Eye-Tech welding helmets.The head harness is equipped with a ratchet adjustment knob. A completeset consists of an Eye-Tech welding helmet, the hard hat adapter and thehard hat.

Hard hat Eye-Tech 0700 000 052Hard hat adaptor Eye-Tech 0700 000 043

HARD HAT WITH EYE-TECH

Three colour types are available and all three can be supplied as standardcurtains, as well as strip curtains. The self-extinguishing material providesgood protection from dangerous welding radiation. The curtains areequipped with press-studs for easy, strong fastening and they are folded at the top and the bottom to withstand harsh use. The strip curtain allowsaccess and enables material to passed through, even when it is closed. Allapproved according to prEN 1598. The mounting rings come in a packageof seven, which is enough to mount any of the curtains (standard as well asstrip). Choose between metal rings or PVC rings with a snap lock. Rings areincluded when ordering any of the curtains.

Welding curtain, dark red, 1.8 x 1.4m 0700 008 004Welding curtain, green transparent, 1.8 x 1.4m 0700 008 005Welding curtain, dark green (DIN 9), 1.8 x 1.4m 0700 008 006Mounting rings PVC 0700 008 007Mounting rings metal 0700 008 008Welding strip curtain, dark red, 1.8 x 1.3m 0700 008 002Welding strip curtain, dark green (DIN 9), 1.8 x 1.3m 0700 008 003Mobile curtain, without wheel, dark red, 2 x 1.4m 0000 595 313Mobile curtain, without wheel, dark red, 2 x 2m 0000 595 315Anti flame mat 900 x 1500mm 0700 014 003Wire reel for welding curtain 0700 008 018

WELDING CURTAINS

Welding Curtains, Jackets & ApronsHearing Protection & Hard Hats

ESAB welding jackets are made of high-quality leather. The front is reinforcedin order to withstand mechanical and thermal stress. Stitched with Kevlarthread, stand up collar and inside pocket with adjustable wrists. The shoulderjacket gives freedom of movement and is more comfortable than a standardjacket when working in a warm environment. Reinforced front and adjustablewrists. The shoulder jacket should be worn together with the apron designedfor use with the shoulder jacket.

ESAB Welding jacket L 0700 010 002ESAB Welding jacket XL 0700 010 003ESAB Shoulder jacket L 0700 010 004ESAB Shoulder jacket XL 0700 010 005Apron for shoulder jacket (one size) 0700 010 006

ESAB WELDING JACKET

Page 146: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

34 35

ESAB’s hearing protectors are available in five different versions; One thatcan be attached to a protective helmet, one with neck support, one withhead support and finally an economy head support version. All of theseprovide effective protection at different decibel levels. A range of highperformance disposable ear plugs is also available.

Hearing protector with neck support 0700 001 880Hearing protector with head support 0000 595 199Hearing protector for G22c 0367 420 002Hearing protector for G2000c, yellow 0367 420 003

Economy ear defender 0701 380 477Ear plugs Pk 200 (not shown) 0700 001 001Ear plugs Pk 100 corded (not shown) 0700 001 002

HEARING PROTECTION

The G2000c and the G22c are high quality protective helmets suitable foruse as an individual hard hat or in combination with the Albatross (G2000c)and the Euromask (G22c). The helmets are equipped with adjustableheadgears and can also be fitted with hearing protection.

Hard hat G2000c 0468 051 881Hard hat G22c 0468 051 880

HARD HATS

The hard hat for Eye-Tech is designed to give good balance when wornseparately as well as when worn with any of the Eye-Tech welding helmets.The head harness is equipped with a ratchet adjustment knob. A completeset consists of an Eye-Tech welding helmet, the hard hat adapter and thehard hat.

Hard hat Eye-Tech 0700 000 052Hard hat adaptor Eye-Tech 0700 000 043

HARD HAT WITH EYE-TECH

Three colour types are available and all three can be supplied as standardcurtains, as well as strip curtains. The self-extinguishing material providesgood protection from dangerous welding radiation. The curtains areequipped with press-studs for easy, strong fastening and they are folded at the top and the bottom to withstand harsh use. The strip curtain allowsaccess and enables material to passed through, even when it is closed. Allapproved according to prEN 1598. The mounting rings come in a packageof seven, which is enough to mount any of the curtains (standard as well asstrip). Choose between metal rings or PVC rings with a snap lock. Rings areincluded when ordering any of the curtains.

Welding curtain, dark red, 1.8 x 1.4m 0700 008 004Welding curtain, green transparent, 1.8 x 1.4m 0700 008 005Welding curtain, dark green (DIN 9), 1.8 x 1.4m 0700 008 006Mounting rings PVC 0700 008 007Mounting rings metal 0700 008 008Welding strip curtain, dark red, 1.8 x 1.3m 0700 008 002Welding strip curtain, dark green (DIN 9), 1.8 x 1.3m 0700 008 003Mobile curtain, without wheel, dark red, 2 x 1.4m 0000 595 313Mobile curtain, without wheel, dark red, 2 x 2m 0000 595 315Anti flame mat 900 x 1500mm 0700 014 003Wire reel for welding curtain 0700 008 018

WELDING CURTAINS

Welding Curtains, Jackets & ApronsHearing Protection & Hard Hats

ESAB welding jackets are made of high-quality leather. The front is reinforcedin order to withstand mechanical and thermal stress. Stitched with Kevlarthread, stand up collar and inside pocket with adjustable wrists. The shoulderjacket gives freedom of movement and is more comfortable than a standardjacket when working in a warm environment. Reinforced front and adjustablewrists. The shoulder jacket should be worn together with the apron designedfor use with the shoulder jacket.

ESAB Welding jacket L 0700 010 002ESAB Welding jacket XL 0700 010 003ESAB Shoulder jacket L 0700 010 004ESAB Shoulder jacket XL 0700 010 005Apron for shoulder jacket (one size) 0700 010 006

ESAB WELDING JACKET

Page 147: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

36 37

The ESAB and Murex protective aprons distribute the weight effectively.They are Kevlar stitched and 107 cm long. Available in ESAB yellow as wellas Murex maroon.

ESAB Apron 0700 010 007Murex Apron 0701 415 798

APRON

Murex welding jacket is maroon in colour with Murex branding front andback. Stitched with Kevlar thread. Stand up collar, inside pocket withadjustable wrists and side straps.

Superior jacket M 0701 415 718Superior jacket L 0701 415 719Superior jacket XL 0701 415 720Superior jacket XXL 0701 415 752

MUREX WELDING JACKET

Hi visibility vest conforms to EN471 class 1/2 hi-visibility performance. One or two body and two shoulder retro reflective strips hook and loopfront fastening.

Motorway Safety Vest 1 Band M 0701 416 044Motorway Safety Vest 1 Band L 0701 416 045Motorway Safety Vest 1 Band XL 0701 416 046Motorway Safety Vest 2 Band M 0701 416 041Motorway Safety Vest 2 Band L 0701 416 042Motorway Safety Vest 2 Band XL 0701 416 043

MOTORWAY SAFETY VEST

PU coated 300 denier Oxford polyester hi-visibility jacket with a quilted liner(polyester filler) which conforms to EN471 class 3/2 for high visibilityperformance and ENV343 3/1 water penetration/vapour resistanceperformance. Other features include fully taped seams, a heavy duty twoway zipper with press stud fastening storm flap with zipped security pocket,internal pocket, a concealed peaked hood in collar, external phone pocketplus large stud fastening external pockets and elasticated storm cuffs.

Motorway Safety Jacket M 0701 415 939Motorway Safety Jacket L 0701 415 940Motorway Safety Jacket XL 0701 415 941Motorway Safety Jacket XXL 0701 415 942

MOTORWAY SAFETY JACKET

Welding Jackets, Aprons & Coveralls

The ESAB and Murex welding coveralls are flame retardant 100% cotton coveralls with two chest pockets and back pocket, tripple stitch reinforcedstress points and concealed stud front.

ESAB Pyroweld M 0700 010 038 ESAB Pyroweld L 0700 010 039 ESAB Pyroweld XL 0700 010 040 ESAB Pyroweld XXL 0700 010 041

Murex Proban Red Coverall 38 0701 415 964Murex Proban Red Coverall 40 0701 415 711Murex Proban Red Coverall 42 0701 415 712Murex Proban Red Coverall 44 0701 415 713Murex Proban Red Coverall 46 0701 415 779Murex Proban Red Coverall 48 0701 415 780Murex Proban Red Coverall 50 0701 415 781Murex Proban Red Coverall 52 0701 416 417

WELDING COVERALLS (FLAME RETARDANT)

Leather gaiters 0700 010 008Sleeve 0000 595 039Proban hood 0000 593 269

Insulated helmet liner 0000 904 378Hand shield 0700 010 009

OTHER WELDING APPAREL – ESAB

Superior Spats 0701 415 799Proban Hood – Extended Length 0701 415 804Legionnaire Hood Proban 0701 415 807

Superior Sleeves 18” Pair 0701 415 796Superior Knee Pad 0701 415 937

OTHER WELDING APPAREL – MUREX

Other Welding Apparel & Clothing – General & High Visibility

Hi visibility reversible waistcoat with two body and two shoulder retro-reflective strips with hook and loop frontfastening. Reverse side is Micro Fleece approved to EN471, 1994 Class 2.

Safety Vest Reversible S 0701 500 159Safety Vest Reversible M 0701 500 160Safety Vest Reversible L 0701 500 161Safety Vest Reversible XL 0701 500 162Safety Vest Reversible XXL 0701 500 163

SAFETY VEST REVERSIBLE

Page 148: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

36 37

The ESAB and Murex protective aprons distribute the weight effectively.They are Kevlar stitched and 107 cm long. Available in ESAB yellow as wellas Murex maroon.

ESAB Apron 0700 010 007Murex Apron 0701 415 798

APRON

Murex welding jacket is maroon in colour with Murex branding front andback. Stitched with Kevlar thread. Stand up collar, inside pocket withadjustable wrists and side straps.

Superior jacket M 0701 415 718Superior jacket L 0701 415 719Superior jacket XL 0701 415 720Superior jacket XXL 0701 415 752

MUREX WELDING JACKET

Hi visibility vest conforms to EN471 class 1/2 hi-visibility performance. One or two body and two shoulder retro reflective strips hook and loopfront fastening.

Motorway Safety Vest 1 Band M 0701 416 044Motorway Safety Vest 1 Band L 0701 416 045Motorway Safety Vest 1 Band XL 0701 416 046Motorway Safety Vest 2 Band M 0701 416 041Motorway Safety Vest 2 Band L 0701 416 042Motorway Safety Vest 2 Band XL 0701 416 043

MOTORWAY SAFETY VEST

PU coated 300 denier Oxford polyester hi-visibility jacket with a quilted liner(polyester filler) which conforms to EN471 class 3/2 for high visibilityperformance and ENV343 3/1 water penetration/vapour resistanceperformance. Other features include fully taped seams, a heavy duty twoway zipper with press stud fastening storm flap with zipped security pocket,internal pocket, a concealed peaked hood in collar, external phone pocketplus large stud fastening external pockets and elasticated storm cuffs.

Motorway Safety Jacket M 0701 415 939Motorway Safety Jacket L 0701 415 940Motorway Safety Jacket XL 0701 415 941Motorway Safety Jacket XXL 0701 415 942

MOTORWAY SAFETY JACKET

Welding Jackets, Aprons & Coveralls

The ESAB and Murex welding coveralls are flame retardant 100% cotton coveralls with two chest pockets and back pocket, tripple stitch reinforcedstress points and concealed stud front.

ESAB Pyroweld M 0700 010 038 ESAB Pyroweld L 0700 010 039 ESAB Pyroweld XL 0700 010 040 ESAB Pyroweld XXL 0700 010 041

Murex Proban Red Coverall 38 0701 415 964Murex Proban Red Coverall 40 0701 415 711Murex Proban Red Coverall 42 0701 415 712Murex Proban Red Coverall 44 0701 415 713Murex Proban Red Coverall 46 0701 415 779Murex Proban Red Coverall 48 0701 415 780Murex Proban Red Coverall 50 0701 415 781Murex Proban Red Coverall 52 0701 416 417

WELDING COVERALLS (FLAME RETARDANT)

Leather gaiters 0700 010 008Sleeve 0000 595 039Proban hood 0000 593 269

Insulated helmet liner 0000 904 378Hand shield 0700 010 009

OTHER WELDING APPAREL – ESAB

Superior Spats 0701 415 799Proban Hood – Extended Length 0701 415 804Legionnaire Hood Proban 0701 415 807

Superior Sleeves 18” Pair 0701 415 796Superior Knee Pad 0701 415 937

OTHER WELDING APPAREL – MUREX

Other Welding Apparel & Clothing – General & High Visibility

Hi visibility reversible waistcoat with two body and two shoulder retro-reflective strips with hook and loop frontfastening. Reverse side is Micro Fleece approved to EN471, 1994 Class 2.

Safety Vest Reversible S 0701 500 159Safety Vest Reversible M 0701 500 160Safety Vest Reversible L 0701 500 161Safety Vest Reversible XL 0701 500 162Safety Vest Reversible XXL 0701 500 163

SAFETY VEST REVERSIBLE

Page 149: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Work ClothingClothing – General & High Visibility

38 39

100% cotton, flame resistant approved to EN531 (a, b2 & c1) & EN470-1.Machine washable with hi-visibility stripes.

Kelso Hi Vis 36 Orange 0701 502 334Kelso Hi Vis 38 Orange 0701 502 335Kelso Hi Vis 40 Orange 0701 502 336Kelso Hi Vis 42 Orange 0701 502 337Kelso Hi Vis 44 Orange 0701 502 338Kelso Hi Vis 46 Orange 0701 502 339Kelso Hi Vis 48 Orange 0701 502 340Kelso Hi Vis 50 Orange 0701 502 341Kelso Hi Vis 52 Orange 0701 502 342Kelso Hi Vis 54 Orange 0701 502 343Kelso Hi Vis 56 Orange 0701 502 344Kelso Hi Vis 58 Orange 0701 502 373

KELSO HI VISIBILITY COVERALL

Outer JacketPU coated 300 denier Oxford polyester hi-visibility jacket with a quilted liner(polyester filler) which conforms to EN471 class 3/2 for high visibility performanceand ENV343 3/1 water penetration/vapour resistance performance.

Other features include fully taped seams, a heavy duty two way zipper withpress stud fastening storm flap with zipped security pocket, internal pocket,a concealed peaked hood in collar, external phone pocket plus large studfastening external pockets and elasticated storm cuffs.

Inner JacketPU coated 300 denier Oxford polyester hi-visibility body warmer withdetachable sleeves and a quilted lining. Outer face when reversed EN471class 3/2 for high visibility performance.

Part 1 Entire JacketPart 2 Outer jacket onlyPart 3 Inner jacket onlyPart 4 Inner jacket reversedPart 5 Inner jacket without sleevesPart 6 Inner jacket reversed without sleevesPart 7 Outer jacket with inner jacket without slevees

Ripon 7 in 1 Hi Vis S 0700 010 165Ripon 7 in 1 Hi Vis M 0700 010 166Ripon 7 in 1 Hi Vis L 0700 010 167Ripon 7 in 1 Hi Vis XL 0700 010 168Ripon 7 in 1 Hi Vis XXL 0700 010 169

THE RIPON 7 IN 1 MULTI JACKET

Premium quality bomber style jacket, 360gm hi-tech system 3 anti-pil microfleece. Collar hood with concealed zip, two external zip pockets, internal zippocket & phone pocket. Elasticated cuffs & hem fully lined.

Newbury Navy S 0701 500 095Newbury Navy M 0701 500 096Newbury Navy L 0701 500 097Newbury Navy XL 0701 500 098Newbury Navy XXL 0701 500 099

NEWBURY FLEECE

High performance fleece jacket windproof and waterproof 360gm microfleece. ActivDri breathable, PU coated mesh lining with hood stored in collarpocket under concealed zip. Two external zip pockets, internal zip pocketand elasticated hem and cuffs.

Epsom Fleecejacket S 0700 010 160Epsom Fleecejacket M 0700 010 161Epsom Fleecejacket L 0700 010 162Epsom Fleecejacket XL 0700 010 163Epsom Fleecejacket XXL 0700 010 164

EPSOM FLEECE JACKET

Taslan/PU fabric with fully taped seams, 2 patch pockets with hand warmerpockets, toggle draw cord at waist, dual function polyester cotton quiltedinner jacket/body warmer with zip out sleeves. Zip security pocket in flyfront, 2 breast pockets and adjustable cuffs.

Windsor S 0701 500 080Windsor M 0701 500 081Windsor L 0701 500 082Windsor XL 0701 500 083Windsor XXL 0701 500 084

WINDSOR COAT

PVC coated nylon with fully taped seams, cord collar with fold-away hood.Warm cotton check lining, 2 bellows side pockets, draw cord to waist, 2 concealed breast pockets and concealed zip-up document/phone pocket.

York Navy S 0701 500 085York Navy M 0701 500 086York Navy L 0701 500 087York Navy XL 0701 500 088York Navy XXL 0701 500 089

YORK JACKET

Page 150: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Work ClothingClothing – General & High Visibility

38 39

100% cotton, flame resistant approved to EN531 (a, b2 & c1) & EN470-1.Machine washable with hi-visibility stripes.

Kelso Hi Vis 36 Orange 0701 502 334Kelso Hi Vis 38 Orange 0701 502 335Kelso Hi Vis 40 Orange 0701 502 336Kelso Hi Vis 42 Orange 0701 502 337Kelso Hi Vis 44 Orange 0701 502 338Kelso Hi Vis 46 Orange 0701 502 339Kelso Hi Vis 48 Orange 0701 502 340Kelso Hi Vis 50 Orange 0701 502 341Kelso Hi Vis 52 Orange 0701 502 342Kelso Hi Vis 54 Orange 0701 502 343Kelso Hi Vis 56 Orange 0701 502 344Kelso Hi Vis 58 Orange 0701 502 373

KELSO HI VISIBILITY COVERALL

Outer JacketPU coated 300 denier Oxford polyester hi-visibility jacket with a quilted liner(polyester filler) which conforms to EN471 class 3/2 for high visibility performanceand ENV343 3/1 water penetration/vapour resistance performance.

Other features include fully taped seams, a heavy duty two way zipper withpress stud fastening storm flap with zipped security pocket, internal pocket,a concealed peaked hood in collar, external phone pocket plus large studfastening external pockets and elasticated storm cuffs.

Inner JacketPU coated 300 denier Oxford polyester hi-visibility body warmer withdetachable sleeves and a quilted lining. Outer face when reversed EN471class 3/2 for high visibility performance.

Part 1 Entire JacketPart 2 Outer jacket onlyPart 3 Inner jacket onlyPart 4 Inner jacket reversedPart 5 Inner jacket without sleevesPart 6 Inner jacket reversed without sleevesPart 7 Outer jacket with inner jacket without slevees

Ripon 7 in 1 Hi Vis S 0700 010 165Ripon 7 in 1 Hi Vis M 0700 010 166Ripon 7 in 1 Hi Vis L 0700 010 167Ripon 7 in 1 Hi Vis XL 0700 010 168Ripon 7 in 1 Hi Vis XXL 0700 010 169

THE RIPON 7 IN 1 MULTI JACKET

Premium quality bomber style jacket, 360gm hi-tech system 3 anti-pil microfleece. Collar hood with concealed zip, two external zip pockets, internal zippocket & phone pocket. Elasticated cuffs & hem fully lined.

Newbury Navy S 0701 500 095Newbury Navy M 0701 500 096Newbury Navy L 0701 500 097Newbury Navy XL 0701 500 098Newbury Navy XXL 0701 500 099

NEWBURY FLEECE

High performance fleece jacket windproof and waterproof 360gm microfleece. ActivDri breathable, PU coated mesh lining with hood stored in collarpocket under concealed zip. Two external zip pockets, internal zip pocketand elasticated hem and cuffs.

Epsom Fleecejacket S 0700 010 160Epsom Fleecejacket M 0700 010 161Epsom Fleecejacket L 0700 010 162Epsom Fleecejacket XL 0700 010 163Epsom Fleecejacket XXL 0700 010 164

EPSOM FLEECE JACKET

Taslan/PU fabric with fully taped seams, 2 patch pockets with hand warmerpockets, toggle draw cord at waist, dual function polyester cotton quiltedinner jacket/body warmer with zip out sleeves. Zip security pocket in flyfront, 2 breast pockets and adjustable cuffs.

Windsor S 0701 500 080Windsor M 0701 500 081Windsor L 0701 500 082Windsor XL 0701 500 083Windsor XXL 0701 500 084

WINDSOR COAT

PVC coated nylon with fully taped seams, cord collar with fold-away hood.Warm cotton check lining, 2 bellows side pockets, draw cord to waist, 2 concealed breast pockets and concealed zip-up document/phone pocket.

York Navy S 0701 500 085York Navy M 0701 500 086York Navy L 0701 500 087York Navy XL 0701 500 088York Navy XXL 0701 500 089

YORK JACKET

Page 151: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Work ClothingWork Clothing

40 41

Showerproof and windproof peached polyester shell with fleece lining. High fleece lined collar, knitted cuffs and hem two external pockets and oneinternal pocket.

Fakenham S 0701 500 090Fakenham M 0701 500 091Fakenham L 0701 500 092Fakenham XL 0701 500 093Fakenham XXL 0701 500 094

FAKENHAM JACKET

ActivDri breathable, windproof and waterproof, double fly front withconcealed security pocket. High fleece faced collar with concealed hood, 5 multi function internal pockets, breast pocket with concealed zipper, 2 zipped outer pockets with storm flaps, internal zip pocket for stormtrousers. Elasticated cuffs with hook and loop fastening draw cord at hemand warm quilted lining.

Ayr Jacket S 0700 010 155Ayr Jacket M 0700 010 156Ayr Jacket L 0700 010 157Ayr Jacket XL 0700 010 158Ayr Jacket XXL 0700 010 159

AYR JACKET

9oz/300gm polycotton with sewn-in crease. Button and metal clip waistfastening, two swing pockets, back pocket with button tab and shirt gripperwaistband.

Ludlow Trouser Navy 31L 30W 0701 500 120Ludlow Trouser Navy 31L 32W 0701 500 121Ludlow Trouser Navy 31L 34W 0701 500 122Ludlow Trouser Navy 31L 36W 0701 500 123Ludlow Trouser Navy 31L 38W 0701 500 124Ludlow Trouser Navy 31L 40W 0701 500 125Ludlow Trouser Navy 31L 42W 0701 500 126Ludlow Trouser Navy 31L 44W 0701 500 127Ludlow Trouser Navy 31L 46W 0701 500 128Ludlow Trouser Navy 33L 30W 0701 500 129Ludlow Trouser Navy 33L 32W 0701 500 130Ludlow Trouser Navy 33L 34W 0701 500 131Ludlow Trouser Navy 33L 36W 0701 500 132Ludlow Trouser Navy 33L 38W 0701 500 133Ludlow Trouser Navy 33L 40W 0701 500 134Ludlow Trouser Navy 33L 42W 0701 500 135Ludlow Trouser Navy 33L 44W 0701 500 136Ludlow Trouser Navy 33L 46W 0701 500 137

LUDLOW WORK TROUSERS

9oz/300gm lined polycotton work jacket with 2 press stud breast pockets, 2swing pockets and zip and press stud front closure.

Ludlow Jacket Navy S 0701 500 115Ludlow Jacket Navy M 0701 500 116Ludlow Jacket Navy L 0701 500 117Ludlow Jacket Navy XL 0701 500 118Ludlow Jacket Navy XXL 0701 500 119Ludlow Jacket Navy XXXL 0701 500 286

LUDLOW WORK JACKET

Premium quality polo shirts in a 210gm 65/35 polycotton pique knit withtimeless styling. Can be worn inside or outside trousers, three button front.

Equus Navy S 0701 500 105Equus Navy M 0701 500 106Equus Navy L 0701 500 107Equus Navy XL 0701 500 108Equus Navy XXL 0701 500 109Equus White S 0701 500 110Equus White M 0701 500 111Equus White L 0701 500 112Equus White XL 0701 500 113Equus White XXL 0701 500 114

EQUUS POLO SHIRT

Page 152: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Work ClothingWork Clothing

40 41

Showerproof and windproof peached polyester shell with fleece lining. High fleece lined collar, knitted cuffs and hem two external pockets and oneinternal pocket.

Fakenham S 0701 500 090Fakenham M 0701 500 091Fakenham L 0701 500 092Fakenham XL 0701 500 093Fakenham XXL 0701 500 094

FAKENHAM JACKET

ActivDri breathable, windproof and waterproof, double fly front withconcealed security pocket. High fleece faced collar with concealed hood, 5 multi function internal pockets, breast pocket with concealed zipper, 2 zipped outer pockets with storm flaps, internal zip pocket for stormtrousers. Elasticated cuffs with hook and loop fastening draw cord at hemand warm quilted lining.

Ayr Jacket S 0700 010 155Ayr Jacket M 0700 010 156Ayr Jacket L 0700 010 157Ayr Jacket XL 0700 010 158Ayr Jacket XXL 0700 010 159

AYR JACKET

9oz/300gm polycotton with sewn-in crease. Button and metal clip waistfastening, two swing pockets, back pocket with button tab and shirt gripperwaistband.

Ludlow Trouser Navy 31L 30W 0701 500 120Ludlow Trouser Navy 31L 32W 0701 500 121Ludlow Trouser Navy 31L 34W 0701 500 122Ludlow Trouser Navy 31L 36W 0701 500 123Ludlow Trouser Navy 31L 38W 0701 500 124Ludlow Trouser Navy 31L 40W 0701 500 125Ludlow Trouser Navy 31L 42W 0701 500 126Ludlow Trouser Navy 31L 44W 0701 500 127Ludlow Trouser Navy 31L 46W 0701 500 128Ludlow Trouser Navy 33L 30W 0701 500 129Ludlow Trouser Navy 33L 32W 0701 500 130Ludlow Trouser Navy 33L 34W 0701 500 131Ludlow Trouser Navy 33L 36W 0701 500 132Ludlow Trouser Navy 33L 38W 0701 500 133Ludlow Trouser Navy 33L 40W 0701 500 134Ludlow Trouser Navy 33L 42W 0701 500 135Ludlow Trouser Navy 33L 44W 0701 500 136Ludlow Trouser Navy 33L 46W 0701 500 137

LUDLOW WORK TROUSERS

9oz/300gm lined polycotton work jacket with 2 press stud breast pockets, 2swing pockets and zip and press stud front closure.

Ludlow Jacket Navy S 0701 500 115Ludlow Jacket Navy M 0701 500 116Ludlow Jacket Navy L 0701 500 117Ludlow Jacket Navy XL 0701 500 118Ludlow Jacket Navy XXL 0701 500 119Ludlow Jacket Navy XXXL 0701 500 286

LUDLOW WORK JACKET

Premium quality polo shirts in a 210gm 65/35 polycotton pique knit withtimeless styling. Can be worn inside or outside trousers, three button front.

Equus Navy S 0701 500 105Equus Navy M 0701 500 106Equus Navy L 0701 500 107Equus Navy XL 0701 500 108Equus Navy XXL 0701 500 109Equus White S 0701 500 110Equus White M 0701 500 111Equus White L 0701 500 112Equus White XL 0701 500 113Equus White XXL 0701 500 114

EQUUS POLO SHIRT

Page 153: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Gloves MIG/MAGWelding Gloves MIG/MAG

42 43

All ESAB gloves are CE approved. The heavy duty welding gauntlets and riggers have been testedand certified by a third part notifying body. The glove is then a Cat. 2 product.

Test against mechanical stress such as abrasion, cut, tear and puncture.

Test for thermal performance such as exposure to an open flame, contact heat, convectiveheat, radiant heat, small and large splashes of molten metal.

WELDING GLOVES MIG/MAG

A heavy-duty 1.3mm welding glove made of selected cow-split leather witha lining that is both comfortable and protective. Wing thumb is angled forhigh comfort and dexterity. Cat. 2.

Heavy duty Basic 0700 005 007

HEAVY-DUTY BASIC

A welding glove made of hard-wearing, heat-resistant cow-split leather,1.3mm thick. Reinforced wing thumb fully welted KEVLAR stitched. CE approved. Cat. 2.

Heavy duty Regular 0700 005 008

HEAVY-DUTY REGULAR

A welding glove made of black, strong cow-grain leather. High dexterity withKEVLAR stitching ensures that the glove can resist hard mechanical stress.Fully welted, CE approved. Cat. 2.

Heavy duty Black 0467 222 007

HEAVY-DUTY BLACK

A welding glove made of cow-split and -grain leather with a padded back towithstand high reflective heat. The threefold KEVLAR seam ensures that theglove can resist hard mechanical stress. The thumb is reinforced. Cat. 2.

Heavy duty EXL L 0700 005 009Heavy duty EXL XL 0700 005 029

HEAVY-DUTY EXL

A welding glove made of cow-grain leather. The back is padded and fullylined. The aluminium-coated rayon reflects 95% of the thermal radiation. The wing thumb is angled for good comfort and KEVLAR stitched ensuringthat the glove can resist hard mechanical stress. CE approved. Cat. 2.

Heavy duty Aluminised 0700 005 010

HEAVY-DUTY ALUMINISED

A quality range of gloves Murex branded, maroon in colour. All approved toEN 388, Cat. 2.

Superior Weld Gauntlet 0701 415 614Superior Gauntlet Reinforced 0701 415 615Superior Rigger 0701 415 613

MUREX SUPERIOR RANGE

A basic gauntlet made of selected cow-split leather with a lining that is both comfortable and protective. The wing thumb is angled for highcomfort. Available in red or green colour. Cat. 1, simple design.

GL10 Green Gauntlet 0701 380 429Red Gauntlet (CE) 0701 380 498

RED/GREEN GAUNTLET

Page 154: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Welding Gloves MIG/MAGWelding Gloves MIG/MAG

42 43

All ESAB gloves are CE approved. The heavy duty welding gauntlets and riggers have been testedand certified by a third part notifying body. The glove is then a Cat. 2 product.

Test against mechanical stress such as abrasion, cut, tear and puncture.

Test for thermal performance such as exposure to an open flame, contact heat, convectiveheat, radiant heat, small and large splashes of molten metal.

WELDING GLOVES MIG/MAG

A heavy-duty 1.3mm welding glove made of selected cow-split leather witha lining that is both comfortable and protective. Wing thumb is angled forhigh comfort and dexterity. Cat. 2.

Heavy duty Basic 0700 005 007

HEAVY-DUTY BASIC

A welding glove made of hard-wearing, heat-resistant cow-split leather,1.3mm thick. Reinforced wing thumb fully welted KEVLAR stitched. CE approved. Cat. 2.

Heavy duty Regular 0700 005 008

HEAVY-DUTY REGULAR

A welding glove made of black, strong cow-grain leather. High dexterity withKEVLAR stitching ensures that the glove can resist hard mechanical stress.Fully welted, CE approved. Cat. 2.

Heavy duty Black 0467 222 007

HEAVY-DUTY BLACK

A welding glove made of cow-split and -grain leather with a padded back towithstand high reflective heat. The threefold KEVLAR seam ensures that theglove can resist hard mechanical stress. The thumb is reinforced. Cat. 2.

Heavy duty EXL L 0700 005 009Heavy duty EXL XL 0700 005 029

HEAVY-DUTY EXL

A welding glove made of cow-grain leather. The back is padded and fullylined. The aluminium-coated rayon reflects 95% of the thermal radiation. The wing thumb is angled for good comfort and KEVLAR stitched ensuringthat the glove can resist hard mechanical stress. CE approved. Cat. 2.

Heavy duty Aluminised 0700 005 010

HEAVY-DUTY ALUMINISED

A quality range of gloves Murex branded, maroon in colour. All approved toEN 388, Cat. 2.

Superior Weld Gauntlet 0701 415 614Superior Gauntlet Reinforced 0701 415 615Superior Rigger 0701 415 613

MUREX SUPERIOR RANGE

A basic gauntlet made of selected cow-split leather with a lining that is both comfortable and protective. The wing thumb is angled for highcomfort. Available in red or green colour. Cat. 1, simple design.

GL10 Green Gauntlet 0701 380 429Red Gauntlet (CE) 0701 380 498

RED/GREEN GAUNTLET

Page 155: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

TIG Gauntlets & Riggers Working Gloves

Welding Gloves MIG/MAG & TIG Gauntlets

44 45

A red gauntlet with a reinforced palm for longer life and extra protection. Fully welted. CE approved, Cat. 2.

Red Gauntlet Reinforced Palm 0701 415 413

RED GAUNTLET REINFORCED PALM

A light weight, traditional TIG gauntlet. Cat. 1, simple design.

TIG Basic 0700 653 532

TIG BASIC

A thin pig-split welding glove suitable for TIG applications. It has a 13cmleather cuff and a reinforced thumb for good grip. The absence of an indexfinger seam increases flexibility. Fully welted. Cat. 2.

TIG Soft 0700 005 005

TIG SOFT

Exclusive TIG-welding glove made of goatskin with seams KEVLAR stitched.The gunn cut straight thumb makes it easy to grip different objects. Theleather cuff is 13cm long and the absence of an index finger seam increasesthe flexibility. The dexterity is extremely good. Fully welted. Cat. 2.

TIG SuperSoft 0700 005 006

TIG SUPERSOFT

A quality TIG gauntlet with a reinforced thumb and 13cm long leather cuff.CE approved, Cat. 2.

TIG Professional 0701 415 963

TIG PROFESSIONAL

A black coloured standard rigger for general mechanical handling. Featuringwing thumb and fully welted seams. CE approved, Cat. 2.

ESAB black rigger 0701 416 398

ESAB BLACK RIGGER

A hard-wearing work glove made of selected cow-grain leather with a cottonlining for comfort. The rubber-reinforced cuff provides extra protection andthe wing thumb is angled. CE approved, Cat. 2.

Heavy duty Worker 0700 005 011

ESAB HEAVY DUTY WORKER

A cow grain, high quality, leather glove. Fully lined and stitched with KEVLARthread. The elasticated back increases comfort in a glove suitable for weldingas well as general work. Wrap-around first finger. CE approved, Cat. 2.

Heavy duty all purpose 0700 005 030

HEAVY DUTY ALL PURPOSE

Page 156: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

TIG Gauntlets & Riggers Working Gloves

Welding Gloves MIG/MAG & TIG Gauntlets

44 45

A red gauntlet with a reinforced palm for longer life and extra protection. Fully welted. CE approved, Cat. 2.

Red Gauntlet Reinforced Palm 0701 415 413

RED GAUNTLET REINFORCED PALM

A light weight, traditional TIG gauntlet. Cat. 1, simple design.

TIG Basic 0700 653 532

TIG BASIC

A thin pig-split welding glove suitable for TIG applications. It has a 13cmleather cuff and a reinforced thumb for good grip. The absence of an indexfinger seam increases flexibility. Fully welted. Cat. 2.

TIG Soft 0700 005 005

TIG SOFT

Exclusive TIG-welding glove made of goatskin with seams KEVLAR stitched.The gunn cut straight thumb makes it easy to grip different objects. Theleather cuff is 13cm long and the absence of an index finger seam increasesthe flexibility. The dexterity is extremely good. Fully welted. Cat. 2.

TIG SuperSoft 0700 005 006

TIG SUPERSOFT

A quality TIG gauntlet with a reinforced thumb and 13cm long leather cuff.CE approved, Cat. 2.

TIG Professional 0701 415 963

TIG PROFESSIONAL

A black coloured standard rigger for general mechanical handling. Featuringwing thumb and fully welted seams. CE approved, Cat. 2.

ESAB black rigger 0701 416 398

ESAB BLACK RIGGER

A hard-wearing work glove made of selected cow-grain leather with a cottonlining for comfort. The rubber-reinforced cuff provides extra protection andthe wing thumb is angled. CE approved, Cat. 2.

Heavy duty Worker 0700 005 011

ESAB HEAVY DUTY WORKER

A cow grain, high quality, leather glove. Fully lined and stitched with KEVLARthread. The elasticated back increases comfort in a glove suitable for weldingas well as general work. Wrap-around first finger. CE approved, Cat. 2.

Heavy duty all purpose 0700 005 030

HEAVY DUTY ALL PURPOSE

Page 157: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Gloves – GeneralRiggers Working Gloves

46 47

A striped back standard Cat. 1 rigger glove for general mechanical handling.

Economy rigger 0701 416 260

ECONOMY RIGGER

A high quality red coloured rigger for general mechanical handling. Featuringwrap-around first finger. Fully welted. CE approved, Cat. 2.

Murex red rigger 0701 415 414

MUREX RED RIGGER

A high quality blue coloured rigger with a rubberised cuff for addedprotection. Featuring fully lined palm and wing thumb for added comfort.Fully welted palm. CE approved, Cat. 2.

Murex blue rigger 0701 415 586

MUREX BLUE RIGGER

For general mechanical handling. Cat. 1, simple design.

Cotton Chrome Glove 0701 416 241

COTTON CHROME PALM GLOVES

PU Coated Assembly Glove 0700 005 031

COATED ASSEMBLY GLOVES

A fully coated nitrile cotton glove featuring 50mm rubberised safety cuff,jersey lined for added comfort. CE approved, Cat. 2.

Nitrile Coated Assembly Glove 0700 005 032

COATED ASSEMBLY GLOVES

PVC Knitwrist Glove. Cat. 2. 0701 415 802

CHEMICAL RESISTANT GLOVES

30cm long high quality nitrile gauntlet. Fully lined gimped cuff. Suitable forpaintshop and many chemical and solvent applications. CE approved, Cat. 2.

Nitrile Glove 0701 416 407

CHEMICAL RESISTANT GLOVES

Page 158: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Gloves – GeneralRiggers Working Gloves

46 47

A striped back standard Cat. 1 rigger glove for general mechanical handling.

Economy rigger 0701 416 260

ECONOMY RIGGER

A high quality red coloured rigger for general mechanical handling. Featuringwrap-around first finger. Fully welted. CE approved, Cat. 2.

Murex red rigger 0701 415 414

MUREX RED RIGGER

A high quality blue coloured rigger with a rubberised cuff for addedprotection. Featuring fully lined palm and wing thumb for added comfort.Fully welted palm. CE approved, Cat. 2.

Murex blue rigger 0701 415 586

MUREX BLUE RIGGER

For general mechanical handling. Cat. 1, simple design.

Cotton Chrome Glove 0701 416 241

COTTON CHROME PALM GLOVES

PU Coated Assembly Glove 0700 005 031

COATED ASSEMBLY GLOVES

A fully coated nitrile cotton glove featuring 50mm rubberised safety cuff,jersey lined for added comfort. CE approved, Cat. 2.

Nitrile Coated Assembly Glove 0700 005 032

COATED ASSEMBLY GLOVES

PVC Knitwrist Glove. Cat. 2. 0701 415 802

CHEMICAL RESISTANT GLOVES

30cm long high quality nitrile gauntlet. Fully lined gimped cuff. Suitable forpaintshop and many chemical and solvent applications. CE approved, Cat. 2.

Nitrile Glove 0701 416 407

CHEMICAL RESISTANT GLOVES

Page 159: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety FootwearGloves – General

48 49

Knitted wrist. CE approved, Cat. 2.

Latex Glove Orange or Green 0701 416 149

Criss Cross Glove - Orange 0701 416 238

ANTI SLIP GLOVES

All ESAB welding footwear is tested and approved according to EN 345 (safety footwear).Depending on application, footwear should always provide appropriate protection, EN 345 givesthe following guidelines:

Safety shoes and boots

Key to symbols:

Safety Basic to EN345 200 joules toe protectionSafety Basic, antistatic and energy absorbing heelSafety Basic, antistatic, energy absorbing heel and water resistant upperSafety Basic, antistatic, energy absorbing heel, water resistant upper and steel midsoleAntistaticDual DensitySteel Midsole

SAFETY FOOTWEAR

SB

S1

S2

S3

DD

Offers the comfort of a standard shoe and full protection according to S3. It is easy to ‘slip on’ and the special microfibre soft lining makes it verycomfortable to wear. The shoe is water and oil resistant and the seam isreinforced with rivets for maximum durability. The dual density sole offers asoft upper part with front and back ‘bumpers’ and arch support, whilst thepart in direct contact with the ground offers extremely high slip resistance.The shoe is equipped with shock absorption and the TF system to preventankle spraining risks, also the sole is heat resistant up to 170°C. They havean elasticated gusset for wide fitting feet with Nomex® treads and high slipresistant soles.

ESAB shoe, size 61/2 (40) 0700 010 182ESAB shoe, size 7 (41) 0700 010 183ESAB shoe, size 8 (42) 0700 010 184ESAB shoe, size 9 (43) 0700 010 185ESAB shoe, size 10 (44) 0700 010 186ESAB shoe, size 101/2 (45) 0700 010 187ESAB shoe, size 11 (46) 0700 010 218

ESAB SAFETY SHOE S3 DD

Page 160: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety FootwearGloves – General

48 49

Knitted wrist. CE approved, Cat. 2.

Latex Glove Orange or Green 0701 416 149

Criss Cross Glove - Orange 0701 416 238

ANTI SLIP GLOVES

All ESAB welding footwear is tested and approved according to EN 345 (safety footwear).Depending on application, footwear should always provide appropriate protection, EN 345 givesthe following guidelines:

Safety shoes and boots

Key to symbols:

Safety Basic to EN345 200 joules toe protectionSafety Basic, antistatic and energy absorbing heelSafety Basic, antistatic, energy absorbing heel and water resistant upperSafety Basic, antistatic, energy absorbing heel, water resistant upper and steel midsoleAntistaticDual DensitySteel Midsole

SAFETY FOOTWEAR

SB

S1

S2

S3

DD

Offers the comfort of a standard shoe and full protection according to S3. It is easy to ‘slip on’ and the special microfibre soft lining makes it verycomfortable to wear. The shoe is water and oil resistant and the seam isreinforced with rivets for maximum durability. The dual density sole offers asoft upper part with front and back ‘bumpers’ and arch support, whilst thepart in direct contact with the ground offers extremely high slip resistance.The shoe is equipped with shock absorption and the TF system to preventankle spraining risks, also the sole is heat resistant up to 170°C. They havean elasticated gusset for wide fitting feet with Nomex® treads and high slipresistant soles.

ESAB shoe, size 61/2 (40) 0700 010 182ESAB shoe, size 7 (41) 0700 010 183ESAB shoe, size 8 (42) 0700 010 184ESAB shoe, size 9 (43) 0700 010 185ESAB shoe, size 10 (44) 0700 010 186ESAB shoe, size 101/2 (45) 0700 010 187ESAB shoe, size 11 (46) 0700 010 218

ESAB SAFETY SHOE S3 DD

Page 161: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety FootwearSafety Footwear

50 51

Offers protection according to S3, and it prevents weld spatter from fallinginto the shoe. The special microfibre soft lining makes it very comfortable towear. The boot is water and oil resistant and the seam is reinforced withrivets for maximum durability. The front is folded and fastened with velcro togive a flat and protected upper. The dual density sole offers a soft upper partwith front and back ‘bumpers’ and arch support, whilst the part in directcontact with the ground offers extremely high slip resistance. The shoe isequipped with shock absorption and the TF system to prevent anklespraining risks, also the sole is heat resistant up to 170°C. They have anelasticated gusset for wide fitting feet with Nomex® treads and high slipresistant soles.

ESAB ankle boot, size 61/2 (40) 0700 010 188ESAB ankle boot, size 7 (41) 0700 010 189ESAB ankle boot, size 8 (42) 0700 010 190ESAB ankle boot, size 9 (43) 0700 010 191ESAB ankle boot, size 10 (44) 0700 010 192ESAB ankle boot, size 101/2 (45) 0700 010 193ESAB ankle boot, size 11 (46) 0700 010 219

ESAB SAFETY ANKLE BOOT S3 DD

Offers protection according to S3 and the high upper gives full protection tothe shin and prevents weld spatter from falling into the boot. The boot isequipped with leather pull loops at the top, making the boot easy to slip on.The boot is water and oil resistant and the seam is reinforced with rivets formaximum durability. The dual density sole offers a soft upper part with frontand back ‘bumpers’ and arch support, whilst the part in direct contact withthe ground offers extremely high slip resistance. The shoe is equipped withshock absorption and the TF system to prevent ankle spraining risks, alsothe sole is heat resistant up to 170°C. They have an elasticated gusset forwide fitting feet with Nomex® treads and high slip resistant soles.

ESAB rigger boot, size 61/2 (40) 0700 010 194ESAB rigger boot, size 7 (41) 0700 010 195ESAB rigger boot, size 8 (42) 0700 010 196ESAB rigger boot, size 9 (43) 0700 010 197ESAB rigger boot, size 10 (44) 0700 010 198ESAB rigger boot, size 101/2 (45) 0700 010 199ESAB rigger boot, size 11 (46) 0700 010 199

ESAB SAFETY RIGGER BOOT S3 DDThe ESAB ankle boot Eco offers an S1 safety level. The boot is closed witha buckle and the shock absorbing sole offers a good slip resistance.

ESAB ankle boot Eco, 61/2 (40) 0700 010 206ESAB ankle boot Eco, size 7 (41) 0700 010 207ESAB ankle boot Eco, size 8 (42) 0700 010 208ESAB ankle boot Eco, size 9 (43) 0700 010 209ESAB ankle boot Eco, size 10 (44) 0700 010 210ESAB ankle boot Eco, size 101/2 (45) 0700 010 211ESAB ankle boot Eco, size 11 (46) 0700 010 222

ESAB ANKLE BOOT ECO S1 DD

The ESAB welding rigger boot Eco offers an S1 safety level. The high uppergives good protection to the shin and stops weld spatter from falling into theboot. The shock absorbing sole gives good slip resistance.

ESAB rigger boot Eco, size 61/2 (40) 0700 010 212ESAB rigger boot Eco, size 7 (41) 0700 010 213ESAB rigger boot Eco, size 8 (42) 0700 010 214ESAB rigger boot Eco, size 9 (43) 0700 010 215ESAB rigger boot Eco, size 10 (44) 0700 010 216ESAB rigger boot Eco, size 101/2 (45) 0700 010 217ESAB rigger boot Eco, size 11 (46) 0700 010 223

ESAB RIGGER BOOT ECO S1 DD

Offers protection according to S3. The laces, running all the way to the top,ensure excellent fit and they are protected from weld spatter by a leatherflap, fastened by velcro. The boot is water and oil resistant and the seam isreinforced with rivets for maximum durability. The dual density sole offers asoft upper part with front and back ‘bumpers’ and arch support, whilst thepart in direct contact with the ground offers extremely high slip resistance.The shoe is equipped with shock absorption and the TF system to preventankle spraining risks, also the sole is heat resistant up to 170°C. They havean elasticated gusset for wide fitting feet with Nomex® treads and high slipresistant soles.

ESAB army boot, size 61/2 (40) 0700 010 200ESAB army boot, size 7 (41) 0700 010 201ESAB army boot, size 8 (42) 0700 010 202ESAB army boot, size 9 (43) 0700 010 203ESAB army boot, size 10 (44) 0700 010 204ESAB army boot, size 101/2 (45) 0700 010 205ESAB army boot, size 11 (46) 0700 010 221

ESAB ARMY BOOT S3 DD

Page 162: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety FootwearSafety Footwear

50 51

Offers protection according to S3, and it prevents weld spatter from fallinginto the shoe. The special microfibre soft lining makes it very comfortable towear. The boot is water and oil resistant and the seam is reinforced withrivets for maximum durability. The front is folded and fastened with velcro togive a flat and protected upper. The dual density sole offers a soft upper partwith front and back ‘bumpers’ and arch support, whilst the part in directcontact with the ground offers extremely high slip resistance. The shoe isequipped with shock absorption and the TF system to prevent anklespraining risks, also the sole is heat resistant up to 170°C. They have anelasticated gusset for wide fitting feet with Nomex® treads and high slipresistant soles.

ESAB ankle boot, size 61/2 (40) 0700 010 188ESAB ankle boot, size 7 (41) 0700 010 189ESAB ankle boot, size 8 (42) 0700 010 190ESAB ankle boot, size 9 (43) 0700 010 191ESAB ankle boot, size 10 (44) 0700 010 192ESAB ankle boot, size 101/2 (45) 0700 010 193ESAB ankle boot, size 11 (46) 0700 010 219

ESAB SAFETY ANKLE BOOT S3 DD

Offers protection according to S3 and the high upper gives full protection tothe shin and prevents weld spatter from falling into the boot. The boot isequipped with leather pull loops at the top, making the boot easy to slip on.The boot is water and oil resistant and the seam is reinforced with rivets formaximum durability. The dual density sole offers a soft upper part with frontand back ‘bumpers’ and arch support, whilst the part in direct contact withthe ground offers extremely high slip resistance. The shoe is equipped withshock absorption and the TF system to prevent ankle spraining risks, alsothe sole is heat resistant up to 170°C. They have an elasticated gusset forwide fitting feet with Nomex® treads and high slip resistant soles.

ESAB rigger boot, size 61/2 (40) 0700 010 194ESAB rigger boot, size 7 (41) 0700 010 195ESAB rigger boot, size 8 (42) 0700 010 196ESAB rigger boot, size 9 (43) 0700 010 197ESAB rigger boot, size 10 (44) 0700 010 198ESAB rigger boot, size 101/2 (45) 0700 010 199ESAB rigger boot, size 11 (46) 0700 010 199

ESAB SAFETY RIGGER BOOT S3 DDThe ESAB ankle boot Eco offers an S1 safety level. The boot is closed witha buckle and the shock absorbing sole offers a good slip resistance.

ESAB ankle boot Eco, 61/2 (40) 0700 010 206ESAB ankle boot Eco, size 7 (41) 0700 010 207ESAB ankle boot Eco, size 8 (42) 0700 010 208ESAB ankle boot Eco, size 9 (43) 0700 010 209ESAB ankle boot Eco, size 10 (44) 0700 010 210ESAB ankle boot Eco, size 101/2 (45) 0700 010 211ESAB ankle boot Eco, size 11 (46) 0700 010 222

ESAB ANKLE BOOT ECO S1 DD

The ESAB welding rigger boot Eco offers an S1 safety level. The high uppergives good protection to the shin and stops weld spatter from falling into theboot. The shock absorbing sole gives good slip resistance.

ESAB rigger boot Eco, size 61/2 (40) 0700 010 212ESAB rigger boot Eco, size 7 (41) 0700 010 213ESAB rigger boot Eco, size 8 (42) 0700 010 214ESAB rigger boot Eco, size 9 (43) 0700 010 215ESAB rigger boot Eco, size 10 (44) 0700 010 216ESAB rigger boot Eco, size 101/2 (45) 0700 010 217ESAB rigger boot Eco, size 11 (46) 0700 010 223

ESAB RIGGER BOOT ECO S1 DD

Offers protection according to S3. The laces, running all the way to the top,ensure excellent fit and they are protected from weld spatter by a leatherflap, fastened by velcro. The boot is water and oil resistant and the seam isreinforced with rivets for maximum durability. The dual density sole offers asoft upper part with front and back ‘bumpers’ and arch support, whilst thepart in direct contact with the ground offers extremely high slip resistance.The shoe is equipped with shock absorption and the TF system to preventankle spraining risks, also the sole is heat resistant up to 170°C. They havean elasticated gusset for wide fitting feet with Nomex® treads and high slipresistant soles.

ESAB army boot, size 61/2 (40) 0700 010 200ESAB army boot, size 7 (41) 0700 010 201ESAB army boot, size 8 (42) 0700 010 202ESAB army boot, size 9 (43) 0700 010 203ESAB army boot, size 10 (44) 0700 010 204ESAB army boot, size 101/2 (45) 0700 010 205ESAB army boot, size 11 (46) 0700 010 221

ESAB ARMY BOOT S3 DD

Page 163: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety FootwearSafety Footwear

52 53

Rugged, hardwearing Goodyear welted safety footwear.

PSF Outback 846 Size 6 (39) 0700 010 050PSF Outback 846 Size 7 (41) 0700 010 051PSF Outback 846 Size 8 (42) 0700 010 052PSF Outback 846 Size 9 (43) 0700 010 053PSF Outback 846 Size 10 (44) 0700 010 054PSF Outback 846 Size 11 (46) 0700 010 055PSF Outback 846 Size 12 (47) 0700 010 056

PSF OUTBACK SB

PSF Outback 844SM Size 6 (39) 0700 010 057PSF Outback 844SM Size 7 (41) 0700 010 058PSF Outback 844SM Size 8 (42) 0700 010 059PSF Outback 844SM Size 9 (43) 0700 010 060PSF Outback 844SM Size 10 (44) 0700 010 061PSF Outback 844SM Size 11 (46) 0700 010 062PSF Outback 844SM Size 12 (47) 0700 010 063

PSF OUTBACK SB

Rigger boots with fur lining, steel midsole, WAT OUT upper or scuff capoptions, plus a new 100% waterproof Dunlop boot.

Riggers 121SM Size 6 (39) 0700 010 088Riggers 121SM Size 7 (41) 0700 010 089Riggers 121SM Size 8 (42) 0700 010 090Riggers 121SM Size 9 (43) 0700 010 091Riggers 121SM Size 10 (44) 0700 010 092Riggers 121SM Size 11 (46) 0700 010 093Riggers 121SM Size 12 (47) 0700 010 094

RIGGER BOOTS S1 DD

Value safety chuckka boot with dual density PU sole, steel toe cap and steelmid sole.

Dallas Boot Size 6 (39) 0701 502 345Dallas Boot Size 7 (41) 0701 502 346Dallas Boot Size 8 (42) 0701 502 347Dallas Boot Size 9 (43) 0701 502 348Dallas Boot Size 10 (44) 0701 502 349Dallas Boot Size 11 (46) 0701 502 350Dallas Boot Size 12 (47) 0701 502 351

DALLAS BOOTS SB DD

A range of safety and non-safety styles manufactured with the publicservices in mind but equally relevant to all areas of the workplace.

PSF Taskforce TF1SM Size 4 (37) 0700 010 078PSF Taskforce TF1SM Size 5 (38) 0700 010 079PSF Taskforce TF1SM Size 6 (39) 0700 010 080PSF Taskforce TF1SM Size 7 (41) 0700 010 081PSF Taskforce TF1SM Size 8 (42) 0700 010 082PSF Taskforce TF1SM Size 9 (43) 0700 010 083PSF Taskforce TF1SM Size 10 (44) 0700 010 084PSF Taskforce TF1SM Size 11 (46) 0700 010 085PSF Taskforce TF1SM Size 12 (47) 0700 010 086PSF Taskforce TF1SM Size 13 (48) 0700 010 087

PSF TASKFORCE S1

A range of five styles with a thermoplastic polyurethane outer sole and a softshock absorbing polyurethane inner layer, offering superior heat resistancecompared to normal dual density polyurethane soles.

PSF TPU 405SM Size 6 (39) 0700 010 064PSF TPU 405SM Size 7 (41) 0700 010 065PSF TPU 405SM Size 8 (42) 0700 010 066PSF TPU 405SM Size 9 (43) 0700 010 067PSF TPU 405SM Size 10 (44) 0700 010 068PSF TPU 405SM Size 11 (46) 0700 010 069PSF TPU 405SM Size 12 (47) 0700 010 070

PSF TPU DD

Traditional boots and chukkas with dual density polyurethane or rubber nitrile sole.

Contractor 805SM Size 6 (39) 0700 010 071Contractor 805SM Size 7 (41) 0700 010 072Contractor 805SM Size 8 (42) 0700 010 073Contractor 805SM Size 9 (43) 0700 010 074Contractor 805SM Size 10 (44) 0700 010 075Contractor 805SM Size 11 (46) 0700 010 076Contractor 805SM Size 12 (47) 0700 010 077

CONTRACTOR SB DD

Page 164: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety FootwearSafety Footwear

52 53

Rugged, hardwearing Goodyear welted safety footwear.

PSF Outback 846 Size 6 (39) 0700 010 050PSF Outback 846 Size 7 (41) 0700 010 051PSF Outback 846 Size 8 (42) 0700 010 052PSF Outback 846 Size 9 (43) 0700 010 053PSF Outback 846 Size 10 (44) 0700 010 054PSF Outback 846 Size 11 (46) 0700 010 055PSF Outback 846 Size 12 (47) 0700 010 056

PSF OUTBACK SB

PSF Outback 844SM Size 6 (39) 0700 010 057PSF Outback 844SM Size 7 (41) 0700 010 058PSF Outback 844SM Size 8 (42) 0700 010 059PSF Outback 844SM Size 9 (43) 0700 010 060PSF Outback 844SM Size 10 (44) 0700 010 061PSF Outback 844SM Size 11 (46) 0700 010 062PSF Outback 844SM Size 12 (47) 0700 010 063

PSF OUTBACK SB

Rigger boots with fur lining, steel midsole, WAT OUT upper or scuff capoptions, plus a new 100% waterproof Dunlop boot.

Riggers 121SM Size 6 (39) 0700 010 088Riggers 121SM Size 7 (41) 0700 010 089Riggers 121SM Size 8 (42) 0700 010 090Riggers 121SM Size 9 (43) 0700 010 091Riggers 121SM Size 10 (44) 0700 010 092Riggers 121SM Size 11 (46) 0700 010 093Riggers 121SM Size 12 (47) 0700 010 094

RIGGER BOOTS S1 DD

Value safety chuckka boot with dual density PU sole, steel toe cap and steelmid sole.

Dallas Boot Size 6 (39) 0701 502 345Dallas Boot Size 7 (41) 0701 502 346Dallas Boot Size 8 (42) 0701 502 347Dallas Boot Size 9 (43) 0701 502 348Dallas Boot Size 10 (44) 0701 502 349Dallas Boot Size 11 (46) 0701 502 350Dallas Boot Size 12 (47) 0701 502 351

DALLAS BOOTS SB DD

A range of safety and non-safety styles manufactured with the publicservices in mind but equally relevant to all areas of the workplace.

PSF Taskforce TF1SM Size 4 (37) 0700 010 078PSF Taskforce TF1SM Size 5 (38) 0700 010 079PSF Taskforce TF1SM Size 6 (39) 0700 010 080PSF Taskforce TF1SM Size 7 (41) 0700 010 081PSF Taskforce TF1SM Size 8 (42) 0700 010 082PSF Taskforce TF1SM Size 9 (43) 0700 010 083PSF Taskforce TF1SM Size 10 (44) 0700 010 084PSF Taskforce TF1SM Size 11 (46) 0700 010 085PSF Taskforce TF1SM Size 12 (47) 0700 010 086PSF Taskforce TF1SM Size 13 (48) 0700 010 087

PSF TASKFORCE S1

A range of five styles with a thermoplastic polyurethane outer sole and a softshock absorbing polyurethane inner layer, offering superior heat resistancecompared to normal dual density polyurethane soles.

PSF TPU 405SM Size 6 (39) 0700 010 064PSF TPU 405SM Size 7 (41) 0700 010 065PSF TPU 405SM Size 8 (42) 0700 010 066PSF TPU 405SM Size 9 (43) 0700 010 067PSF TPU 405SM Size 10 (44) 0700 010 068PSF TPU 405SM Size 11 (46) 0700 010 069PSF TPU 405SM Size 12 (47) 0700 010 070

PSF TPU DD

Traditional boots and chukkas with dual density polyurethane or rubber nitrile sole.

Contractor 805SM Size 6 (39) 0700 010 071Contractor 805SM Size 7 (41) 0700 010 072Contractor 805SM Size 8 (42) 0700 010 073Contractor 805SM Size 9 (43) 0700 010 074Contractor 805SM Size 10 (44) 0700 010 075Contractor 805SM Size 11 (46) 0700 010 076Contractor 805SM Size 12 (47) 0700 010 077

CONTRACTOR SB DD

Page 165: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety FootwearSafety Footwear

54 55

Specialist footwear for hazardous working environments.

Special Hazard 96SM Size 5 (38) 0700 010 105Special Hazard 96SM Size 6 (39) 0700 010 106Special Hazard 96SM Size 7 (41) 0700 010 107Special Hazard 96SM Size 8 (42) 0700 010 108Special Hazard 96SM Size 9 (43) 0700 010 109Special Hazard 96SM Size 10 (44) 0700 010 110Special Hazard 96SM Size 11 (46) 0700 010 111Special Hazard 96SM Size 12 (47) 0700 010 112

SPECIAL HAZARD FOOTWEAR SB

A brand new range range of completely metal-free footwear, including fourNMP styles with a non-metal composite midsole. This footwear is ideal foremployees, including construction staff, working in areas where securityscreening is a necessity.

PSF Terrain 960SM Size 6 (39) 0700 010 113PSF Terrain 960SM Size 7 (41) 0700 010 114PSF Terrain 960SM Size 8 (42) 0700 010 115PSF Terrain 960SM Size 9 (43) 0700 010 116PSF Terrain 960SM Size 10 (44) 0700 010 117PSF Terrain 960SM Size 11 (46) 0700 010 118PSF Terrain 960SM Size 12 (47) 0700 010 119

PSF TERRAIN SB

Shoes, boots and chukkas all with lightweight dual density polyurethane soles.

PSF Dual Density 68SM Size 6 (39) 0700 010 120PSF Dual Density 68SM Size 7 (41) 0700 010 121PSF Dual Density 68SM Size 8 (42) 0700 010 122PSF Dual Density 68SM Size 9 (43) 0700 010 123PSF Dual Density 68SM Size 10 (44) 0700 010 124PSF Dual Density 68SM Size 11 (46) 0700 010 125PSF Dual Density 68SM Size 12 (47) 0700 010 126

PSF DUAL DENSITY S1 DD

A range of extremely durable yet very lightweight footwear with a PU/Rubber sole.

PSF Strata 524SM Size 6 (39) 0700 010 127PSF Strata 524SM Size 7 (41) 0700 010 128PSF Strata 524SM Size 8 (42) 0700 010 129PSF Strata 524SM Size 9 (43) 0700 010 130PSF Strata 524SM Size 10 (44) 0700 010 131PSF Strata 524SM Size 11 (46) 0700 010 132PSF Strata 524SM Size 12 (47) 0700 010 133

PSF STRADA S3 DD

Great value for money footwear.

Contract Ho201 Size 6 (39) 0700 010 134Contract Ho201 Size 7 (41) 0700 010 135Contract Ho201 Size 8 (42) 0700 010 136Contract Ho201 Size 9 (43) 0700 010 137Contract Ho201 Size 10 (44) 0700 010 138Contract Ho201 Size 11 (46) 0700 010 139Contract Ho201 Size 12 (47) 0700 010 140

CONTRACT S1 DD

Features a thermoplastic polyurethane sole, providing increased flexibilityand heat resistance.

PSF TPU 403 Size 6 (39) 0700 010 141PSF TPU 403 Size 7 (41) 0700 010 142PSF TPU 403 Size 8 (42) 0700 010 143PSF TPU 403 Size 9 (43) 0700 010 144PSF TPU 403 Size 10 (44) 0700 010 145PSF TPU 403 Size 11 (46) 0700 010 146PSF TPU 403 Size 12 (47) 0700 010 147

PSF TPU DD

Page 166: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety FootwearSafety Footwear

54 55

Specialist footwear for hazardous working environments.

Special Hazard 96SM Size 5 (38) 0700 010 105Special Hazard 96SM Size 6 (39) 0700 010 106Special Hazard 96SM Size 7 (41) 0700 010 107Special Hazard 96SM Size 8 (42) 0700 010 108Special Hazard 96SM Size 9 (43) 0700 010 109Special Hazard 96SM Size 10 (44) 0700 010 110Special Hazard 96SM Size 11 (46) 0700 010 111Special Hazard 96SM Size 12 (47) 0700 010 112

SPECIAL HAZARD FOOTWEAR SB

A brand new range range of completely metal-free footwear, including fourNMP styles with a non-metal composite midsole. This footwear is ideal foremployees, including construction staff, working in areas where securityscreening is a necessity.

PSF Terrain 960SM Size 6 (39) 0700 010 113PSF Terrain 960SM Size 7 (41) 0700 010 114PSF Terrain 960SM Size 8 (42) 0700 010 115PSF Terrain 960SM Size 9 (43) 0700 010 116PSF Terrain 960SM Size 10 (44) 0700 010 117PSF Terrain 960SM Size 11 (46) 0700 010 118PSF Terrain 960SM Size 12 (47) 0700 010 119

PSF TERRAIN SB

Shoes, boots and chukkas all with lightweight dual density polyurethane soles.

PSF Dual Density 68SM Size 6 (39) 0700 010 120PSF Dual Density 68SM Size 7 (41) 0700 010 121PSF Dual Density 68SM Size 8 (42) 0700 010 122PSF Dual Density 68SM Size 9 (43) 0700 010 123PSF Dual Density 68SM Size 10 (44) 0700 010 124PSF Dual Density 68SM Size 11 (46) 0700 010 125PSF Dual Density 68SM Size 12 (47) 0700 010 126

PSF DUAL DENSITY S1 DD

A range of extremely durable yet very lightweight footwear with a PU/Rubber sole.

PSF Strata 524SM Size 6 (39) 0700 010 127PSF Strata 524SM Size 7 (41) 0700 010 128PSF Strata 524SM Size 8 (42) 0700 010 129PSF Strata 524SM Size 9 (43) 0700 010 130PSF Strata 524SM Size 10 (44) 0700 010 131PSF Strata 524SM Size 11 (46) 0700 010 132PSF Strata 524SM Size 12 (47) 0700 010 133

PSF STRADA S3 DD

Great value for money footwear.

Contract Ho201 Size 6 (39) 0700 010 134Contract Ho201 Size 7 (41) 0700 010 135Contract Ho201 Size 8 (42) 0700 010 136Contract Ho201 Size 9 (43) 0700 010 137Contract Ho201 Size 10 (44) 0700 010 138Contract Ho201 Size 11 (46) 0700 010 139Contract Ho201 Size 12 (47) 0700 010 140

CONTRACT S1 DD

Features a thermoplastic polyurethane sole, providing increased flexibilityand heat resistance.

PSF TPU 403 Size 6 (39) 0700 010 141PSF TPU 403 Size 7 (41) 0700 010 142PSF TPU 403 Size 8 (42) 0700 010 143PSF TPU 403 Size 9 (43) 0700 010 144PSF TPU 403 Size 10 (44) 0700 010 145PSF TPU 403 Size 11 (46) 0700 010 146PSF TPU 403 Size 12 (47) 0700 010 147

PSF TPU DD

Page 167: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety Footwear

A range of quality tools and accessories for welding,cutting and general engineering applications offeringeverything from cable connectors to high specificationelectrode drying ovens. All our welding tools andaccessories conform to the relevant EU legislationand standards.

Welding Tools and Accessories

56

Shoes, boots and chukkas all with lightweight dual density polyurethane soles.

PSF Dual Density 55 Size 6 (39) 0700 010 148PSF Dual Density 55 Size 7 (41) 0700 010 149PSF Dual Density 55 Size 8 (42) 0700 010 150PSF Dual Density 55 Size 9 (43) 0700 010 151PSF Dual Density 55 Size 10 (44) 0700 010 152PSF Dual Density 55 Size 11 (46) 0700 010 153PSF Dual Density 55 Size 12 (47) 0700 010 154

PSF DUAL DENSITY

A standard non safety wellington.

Wellingtons 380VP Size 3 (36) 0700 010 095Wellingtons 380VP Size 4 (37) 0700 010 096Wellingtons 380VP Size 5 (38) 0700 010 097Wellingtons 380VP Size 6 (39) 0700 010 098Wellingtons 380VP Size 7 (41) 0700 010 099Wellingtons 380VP Size 8 (42) 0700 010 100Wellingtons 380VP Size 9 (43) 0700 010 101Wellingtons 380VP Size 10 (44) 0700 010 102Wellingtons 380VP Size 11 (46) 0700 010 103Wellingtons 380VP Size 12 (47) 0700 010 104

WELLINGTONS

S1 DD

57

Page 168: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Safety Footwear

A range of quality tools and accessories for welding,cutting and general engineering applications offeringeverything from cable connectors to high specificationelectrode drying ovens. All our welding tools andaccessories conform to the relevant EU legislationand standards.

Welding Tools and Accessories

56

Shoes, boots and chukkas all with lightweight dual density polyurethane soles.

PSF Dual Density 55 Size 6 (39) 0700 010 148PSF Dual Density 55 Size 7 (41) 0700 010 149PSF Dual Density 55 Size 8 (42) 0700 010 150PSF Dual Density 55 Size 9 (43) 0700 010 151PSF Dual Density 55 Size 10 (44) 0700 010 152PSF Dual Density 55 Size 11 (46) 0700 010 153PSF Dual Density 55 Size 12 (47) 0700 010 154

PSF DUAL DENSITY

A standard non safety wellington.

Wellingtons 380VP Size 3 (36) 0700 010 095Wellingtons 380VP Size 4 (37) 0700 010 096Wellingtons 380VP Size 5 (38) 0700 010 097Wellingtons 380VP Size 6 (39) 0700 010 098Wellingtons 380VP Size 7 (41) 0700 010 099Wellingtons 380VP Size 8 (42) 0700 010 100Wellingtons 380VP Size 9 (43) 0700 010 101Wellingtons 380VP Size 10 (44) 0700 010 102Wellingtons 380VP Size 11 (46) 0700 010 103Wellingtons 380VP Size 12 (47) 0700 010 104

WELLINGTONS

S1 DD

57

Page 169: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Connectors & Electrode HoldersCables & Connectors

58 59

ESAB welding cable is of the highest quality and has top-class performancecharacteristics. This cable is approved in accordance with internationalstandards and it is harmonised <HAR>. The cable is extremely resistant tolight, chemicals and mechanical damage and it maintains its flexibility evenwhen used in a cool environment.

Sectional area 16mm2 sold per 50m coils 0190 429 801Sectional area 25mm2 sold per 50m coils 0262 613 601Sectional area 35mm2 sold per 50m coils 0262 613 602Sectional area 50mm2 sold per 50m coils 0262 613 606Sectional area 70mm2 sold per 50m coils 0262 613 603Sectional area 95mm2 sold per 50m coils 0262 613 604Sectional area 120mm2 sold per 25m coils 0262 613 605

50mm Hammer Lug Pk 3 0701 380 04995mm Hammer Lug Pk 3 0701 380 050

WELDING CABLE, <HAR> H01N2-D

A new generation of CE-approved, fully insulated cable connections withneoprene rubber. Bayonet-type connection which locks firmly to provide safeand effective contact. The cable is fixed into a socket with two Allen screws.

OKC male 10-25mm2 ESAB 0160 360 880OKC male 35-50mm2 ESAB 0160 360 881OKC male 70-95mm2 ESAB 0160 360 882OKC male 120mm2 ESAB 0160 360 883OKC female 10-25mm2 ESAB 0160 361 880OKC female 35-50mm2 ESAB 0160 361 881OKC female 70-95mm2 ESAB 0160 361 882OKC female 120mm2 (Black) 0160 361 883OKC male 10-25mm Murex (Red) 0701 416 257OKC male 25-50mm Murex (Red) 0701 416 258OKC male 50-95mm Murex (Red) 0701 416 259OKC female 10-25mm Murex (Red) 0701 416 254OKC female 25-50mm Murex (Red) 0701 416 255OKC female 50-95mm Murex (Red) 0701 416 256

OKC CABLE CONNECTION

Fully insulated with neoprene rubber. Sturdy and robust with low contactresistance. The cable is fixed into a socket with two Allen screws. The twohalves of the connection in a ZBK connection are identical and can thereforebe interchanged in any order.

ZBK 25-35mm2 0265 902 482ZBK 50-70mm2 0265 902 481ZBK 95-120mm2 0265 902 480

ZBK CABLE CONNECTION

The contacts should be mounted on the front panel of the machine andcome in three dimensions. The angle connection is supplied as OKC 50-95male and female.

OKC machine contact for OKC 25 0160 362 880OKC machine contact for OKC 50/95 0160 362 881OKC machine contact for OKC 120 0160 362 882Type 1, 1 male, 2 female 0365 557 001Type 2, 2 male, 1 female 0365 558 001

OKC MACHINE CONTACTS AND ANGLE CONNECTION

These heavy-duty connectors feature the cone and bush design of cableconnection. They have high quality black rubber boots with positive lock and seal. They will accept up to 70mm2 copper or aluminium cable.

CC17 Plug 0700 606 402CC18 Socket 0700 606 403

CC17/18 CONNECTORS

ESAB's CE-approved screw-type electrode holder offers many advantagesincluding:Excellent current transfer between electrode and holderTwo hole positions at 45 and 90 for welding in different positionsElectrode cable held in place by two Allen screwsAll electrode holders are fully insulated to provide maximum safety

ESAB 200, 200 A (35%) 0333 249 001ESAB 400, 400 A (35%) 0369 849 880ESAB 500, 500 A (35%) 0369 850 880

ELECTRODE HOLDER ESAB 200, 400 AND 500

A closed head electrode holder allowing the electrode to be fitted eitherhorizontally or vertically. The electrode holder is made of glassfibre-reinforcedplastic. All Optimus electrode holders are fully insulated and approved toEN-60974-11.

Optimus 300, 400 A (35%) 0760 001 300Optimus 400, 500 A (35%) 0760 001 400Optimus 600, 600 A (35%) 0760 001 600

ELECTRODE HOLDER OPTIMUS

Page 170: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Connectors & Electrode HoldersCables & Connectors

58 59

ESAB welding cable is of the highest quality and has top-class performancecharacteristics. This cable is approved in accordance with internationalstandards and it is harmonised <HAR>. The cable is extremely resistant tolight, chemicals and mechanical damage and it maintains its flexibility evenwhen used in a cool environment.

Sectional area 16mm2 sold per 50m coils 0190 429 801Sectional area 25mm2 sold per 50m coils 0262 613 601Sectional area 35mm2 sold per 50m coils 0262 613 602Sectional area 50mm2 sold per 50m coils 0262 613 606Sectional area 70mm2 sold per 50m coils 0262 613 603Sectional area 95mm2 sold per 50m coils 0262 613 604Sectional area 120mm2 sold per 25m coils 0262 613 605

50mm Hammer Lug Pk 3 0701 380 04995mm Hammer Lug Pk 3 0701 380 050

WELDING CABLE, <HAR> H01N2-D

A new generation of CE-approved, fully insulated cable connections withneoprene rubber. Bayonet-type connection which locks firmly to provide safeand effective contact. The cable is fixed into a socket with two Allen screws.

OKC male 10-25mm2 ESAB 0160 360 880OKC male 35-50mm2 ESAB 0160 360 881OKC male 70-95mm2 ESAB 0160 360 882OKC male 120mm2 ESAB 0160 360 883OKC female 10-25mm2 ESAB 0160 361 880OKC female 35-50mm2 ESAB 0160 361 881OKC female 70-95mm2 ESAB 0160 361 882OKC female 120mm2 (Black) 0160 361 883OKC male 10-25mm Murex (Red) 0701 416 257OKC male 25-50mm Murex (Red) 0701 416 258OKC male 50-95mm Murex (Red) 0701 416 259OKC female 10-25mm Murex (Red) 0701 416 254OKC female 25-50mm Murex (Red) 0701 416 255OKC female 50-95mm Murex (Red) 0701 416 256

OKC CABLE CONNECTION

Fully insulated with neoprene rubber. Sturdy and robust with low contactresistance. The cable is fixed into a socket with two Allen screws. The twohalves of the connection in a ZBK connection are identical and can thereforebe interchanged in any order.

ZBK 25-35mm2 0265 902 482ZBK 50-70mm2 0265 902 481ZBK 95-120mm2 0265 902 480

ZBK CABLE CONNECTION

The contacts should be mounted on the front panel of the machine andcome in three dimensions. The angle connection is supplied as OKC 50-95male and female.

OKC machine contact for OKC 25 0160 362 880OKC machine contact for OKC 50/95 0160 362 881OKC machine contact for OKC 120 0160 362 882Type 1, 1 male, 2 female 0365 557 001Type 2, 2 male, 1 female 0365 558 001

OKC MACHINE CONTACTS AND ANGLE CONNECTION

These heavy-duty connectors feature the cone and bush design of cableconnection. They have high quality black rubber boots with positive lock and seal. They will accept up to 70mm2 copper or aluminium cable.

CC17 Plug 0700 606 402CC18 Socket 0700 606 403

CC17/18 CONNECTORS

ESAB's CE-approved screw-type electrode holder offers many advantagesincluding:Excellent current transfer between electrode and holderTwo hole positions at 45 and 90 for welding in different positionsElectrode cable held in place by two Allen screwsAll electrode holders are fully insulated to provide maximum safety

ESAB 200, 200 A (35%) 0333 249 001ESAB 400, 400 A (35%) 0369 849 880ESAB 500, 500 A (35%) 0369 850 880

ELECTRODE HOLDER ESAB 200, 400 AND 500

A closed head electrode holder allowing the electrode to be fitted eitherhorizontally or vertically. The electrode holder is made of glassfibre-reinforcedplastic. All Optimus electrode holders are fully insulated and approved toEN-60974-11.

Optimus 300, 400 A (35%) 0760 001 300Optimus 400, 500 A (35%) 0760 001 400Optimus 600, 600 A (35%) 0760 001 600

ELECTRODE HOLDER OPTIMUS

Page 171: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Electrode Holders & ClampsElectrode Holders

60 61

An open head electrode holder, the Samson is the ‘classic’ electrode tongdesign of electrode holder, made of a glassfibre-reinforced plastic. All Samsonelectrode holders are fully insulated and approved to EN-60974-11.

Samson 300, 300 A (60%) 0760 002 300Samson 400, 400 A (60%) 0760 002 400Samson 500, 500 A (60%) 0760 002 500

ELECTRODE HOLDER SAMSON

A ‘screw type’ electrode holder with a fully insulated head and handle.

Handy 200, 200 A (35%) 0700 006 003Handy 300, 300 A (35%) 0700 006 016Handy 400, 400 A (35%) 0700 006 013

ECO HOLDER HANDY

An open head electrode holder with a fully insulated head and handle.

Confort 200, 200 A (35%) 0700 006 004Confort 300, 300 A (35%) 0700 006 005Confort 400, 400 A (35%) 0700 006 015

ECO HOLDER COMFORT

A closed head electrode holder with a fully insulated head and handle.

Prima 200, 200 A (35%) 0700 006 006Prima 300, 300 A (35%) 0700 006 007Prima 400, 400 A (35%) 0700 006 014

ECO HOLDER PRIMA

This is a crocodile style electrode holder, which is made from black phenolicresin insulated jaws and black handle. The holder is fully insulated for extrasafety and copper jaws for good contact.

600A Handicool Electrode Holder 0700 605 378

MUREX HANDICOOL

This is a twist grip, short stub electrode holder. All the electrode is availablefor use and the angle allows the hand to remain away from the weld pool.The handle is used to apply torque to the electrode clamp in the head.

Econ 405 Electrode Holder 0701 380 433Econ 605 Electrode Holder 0701 380 434

MUREX ECON

The MK 150 is a fully galvanised earth clamp with a maximum opening of50mm. The MP 200, MP 300 and MP 450 are robust earth clamps withstrong gripping power for good contact. The maximum opening for the MP200 is 50mm and 55mm and 60mm for the MP 300 and MP 450 respectively.

MK 150, 150 A (35%) 0682 103 801MP 200, 200 A (35%) 0367 558 880MP 300, 300 A (35%) 0682 103 803MP 450, 450 A (35%) 0000 419 450

MK 150, MP 200, MP 300 AND MP450

The EG 600 is an extremely robust earth clamp made of brass. The weldingcable is attached using a hexagonal socket screw and the clamp has amaximum opening of 50mm and a maximum capacity of 600 amperes. The JK3 is a C-clamp model, galvanised and with a maximum opening of 48mm and maximum capacity of 500 amperes.

EG 600, 600 A (35%) 0160 288 001JK 3, 500 A (35%) 0000 103 588

RETURN CLAMP EG 600 AND JK3

Page 172: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Electrode Holders & ClampsElectrode Holders

60 61

An open head electrode holder, the Samson is the ‘classic’ electrode tongdesign of electrode holder, made of a glassfibre-reinforced plastic. All Samsonelectrode holders are fully insulated and approved to EN-60974-11.

Samson 300, 300 A (60%) 0760 002 300Samson 400, 400 A (60%) 0760 002 400Samson 500, 500 A (60%) 0760 002 500

ELECTRODE HOLDER SAMSON

A ‘screw type’ electrode holder with a fully insulated head and handle.

Handy 200, 200 A (35%) 0700 006 003Handy 300, 300 A (35%) 0700 006 016Handy 400, 400 A (35%) 0700 006 013

ECO HOLDER HANDY

An open head electrode holder with a fully insulated head and handle.

Confort 200, 200 A (35%) 0700 006 004Confort 300, 300 A (35%) 0700 006 005Confort 400, 400 A (35%) 0700 006 015

ECO HOLDER COMFORT

A closed head electrode holder with a fully insulated head and handle.

Prima 200, 200 A (35%) 0700 006 006Prima 300, 300 A (35%) 0700 006 007Prima 400, 400 A (35%) 0700 006 014

ECO HOLDER PRIMA

This is a crocodile style electrode holder, which is made from black phenolicresin insulated jaws and black handle. The holder is fully insulated for extrasafety and copper jaws for good contact.

600A Handicool Electrode Holder 0700 605 378

MUREX HANDICOOL

This is a twist grip, short stub electrode holder. All the electrode is availablefor use and the angle allows the hand to remain away from the weld pool.The handle is used to apply torque to the electrode clamp in the head.

Econ 405 Electrode Holder 0701 380 433Econ 605 Electrode Holder 0701 380 434

MUREX ECON

The MK 150 is a fully galvanised earth clamp with a maximum opening of50mm. The MP 200, MP 300 and MP 450 are robust earth clamps withstrong gripping power for good contact. The maximum opening for the MP200 is 50mm and 55mm and 60mm for the MP 300 and MP 450 respectively.

MK 150, 150 A (35%) 0682 103 801MP 200, 200 A (35%) 0367 558 880MP 300, 300 A (35%) 0682 103 803MP 450, 450 A (35%) 0000 419 450

MK 150, MP 200, MP 300 AND MP450

The EG 600 is an extremely robust earth clamp made of brass. The weldingcable is attached using a hexagonal socket screw and the clamp has amaximum opening of 50mm and a maximum capacity of 600 amperes. The JK3 is a C-clamp model, galvanised and with a maximum opening of 48mm and maximum capacity of 500 amperes.

EG 600, 600 A (35%) 0160 288 001JK 3, 500 A (35%) 0000 103 588

RETURN CLAMP EG 600 AND JK3

Page 173: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ClampsClamps

62 63

An earth clamp that provides good contact with the work piece and isavailable in two sizes.

Eco clamp 250, 250 A (35%) 0700 006 001Eco clamp 400, 400 A (35%) 0700 006 002

ECO CLAMPS

This clamp is robustly constructed from substantial castings. The screwlever allows maximum compression to the workpiece. Suitable for up to 600 amps.

CC11 Screw Type Earth Clamp 0701 400 000

RETURN CLAMP CC11

Magnetic earth clamps with strong gripping power that permits attachmentto any ferrous object. These clamps provide a large contact area with lessoverheating thanks to fewer junctions.

Magnetic earth clamp 400 A (35%) 0000 500 415

Magnetic earth clamp 600 A (35%) 0000 500 416

MAGNETIC CLAMPS

A good connection to the workpiece is needed to obtain optimal manual or automatic welding. For rotating workpieces, an earth connection with arotatable earth coupling is the safest choice. A range of current couplings is available. To attach the coupling to the workpiece, special clamps areavailable. (Please see: Return clamps for rotating workpieces).

NKK 400 - max 400 A, (1.65 kg) 0000 595 133NKK 600 - max 600 A, (2.2 kg) 0700 004 007NKK 800 - max 800 A, (2.7 kg) 0700 004 001NKK 1200 - max 1200 A, (4.0 kg) 0700 004 002NKK 2000 - max 2000 A, (7.3 kg) 0700 004 003

ROTATABLE EARTH COUPLINGS

The earth clamps K2 or PZ3 can be mounted directly on to the rotatableearth coupling to create a good contact between the work piece and thereturn cable. The return clamps can also be used together with the GA 800to form a complete earth clamp that can handle high current welding onnone rotating work pieces.

GA 800 - handle connection for K2 0700 004 005

K2 - clamp head for NKK 800 or 1200 0700 004 004

PZ3 - pole clamp for NKK 2000 0700 004 006

RETURN CLAMPS FOR ROTATING WORKPIECES

Page 174: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ClampsClamps

62 63

An earth clamp that provides good contact with the work piece and isavailable in two sizes.

Eco clamp 250, 250 A (35%) 0700 006 001Eco clamp 400, 400 A (35%) 0700 006 002

ECO CLAMPS

This clamp is robustly constructed from substantial castings. The screwlever allows maximum compression to the workpiece. Suitable for up to 600 amps.

CC11 Screw Type Earth Clamp 0701 400 000

RETURN CLAMP CC11

Magnetic earth clamps with strong gripping power that permits attachmentto any ferrous object. These clamps provide a large contact area with lessoverheating thanks to fewer junctions.

Magnetic earth clamp 400 A (35%) 0000 500 415

Magnetic earth clamp 600 A (35%) 0000 500 416

MAGNETIC CLAMPS

A good connection to the workpiece is needed to obtain optimal manual or automatic welding. For rotating workpieces, an earth connection with arotatable earth coupling is the safest choice. A range of current couplings is available. To attach the coupling to the workpiece, special clamps areavailable. (Please see: Return clamps for rotating workpieces).

NKK 400 - max 400 A, (1.65 kg) 0000 595 133NKK 600 - max 600 A, (2.2 kg) 0700 004 007NKK 800 - max 800 A, (2.7 kg) 0700 004 001NKK 1200 - max 1200 A, (4.0 kg) 0700 004 002NKK 2000 - max 2000 A, (7.3 kg) 0700 004 003

ROTATABLE EARTH COUPLINGS

The earth clamps K2 or PZ3 can be mounted directly on to the rotatableearth coupling to create a good contact between the work piece and thereturn cable. The return clamps can also be used together with the GA 800to form a complete earth clamp that can handle high current welding onnone rotating work pieces.

GA 800 - handle connection for K2 0700 004 005

K2 - clamp head for NKK 800 or 1200 0700 004 004

PZ3 - pole clamp for NKK 2000 0700 004 006

RETURN CLAMPS FOR ROTATING WORKPIECES

Page 175: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Anti SpatterAnti Spatter

64 65

The ESAB Eco-Tech is a high performing anti spatter spray, which iscompletely safe, both for the welder as well as for the environment. Thepropellant is compressed air, hence it is completely none-combustible. Thesolvent free liquid should be applied in a thin layer before welding. The Eco-Tech is water based and does not contain anything that can interfere withpainting, galvanising or any other after treatments.

ESAB Eco-Tech anti spatter 300 ml 0700 013 007ESAB Eco-Tech anti spatter 10 litre 0700 013 008ESAB Eco-Tech anti spatter 25 litre 0700 013 009Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB ECO-TECH ANTI SPATTER

Combines uncompromising efficiency with active environmental and healthprotection. The High-Tech spray effectively prevents spatter from sticking on the work piece (or on the welding torch). The High-Tech weld-protect air-spray is absolutely non-combustible, has no toxic classification, uses noharmful gases and is safe for the skin. The propellant is compressed air, it is solvent free and gives no indirect air pollution or contribution to thegreenhouse effect. It is absolutely silicon-free and water-soluble. The designof the aluminium can and valve make it possible to spray in all positions.High-Tech contains no dangerous or harmful substances according to88/379/EEC.

High-Tech 400 ml 0760 025 500High-Tech 10 litre 0760 025 010High-Tech 25 litre 0760 025 025Hand spray bottle 0000 138 408

ESAB HIGH-TECH ANTI SPATTER

The ESAB Pre-Weld fluid is so much more than a traditional anti spatter.ESAB have managed to develop a product that has a much higherconcentration of the active substance than any other product available. The product does not evaporate off the work piece, it gives extraordinaryprotection all the way from the very edge of the weld and out across the work piece. But still the product is vegetable oil and completely safe, nodangerous/harmful substances are included. The fluid is absolutely siliconfree and water-soluble, there are no problems with painting or with any other after treatments.

The spray can contains 600 ml of active fluid, no solvents. The fluid is kept inan aluminium bag inside the can. The pressure surrounding the bag forces thefluid out when the valve is opened. This allows the can to be sprayed at anangle and still allows you to get every drop of fluid from the can. Note that it isonly active fluid that is released, this is what makes the product so efficient.

When welding stainless steel the ESAB Pre-Weld can eliminate the need of pickling paste. If the fluid is applied before welding and again when thematerial has cooled down, the discolouring can be removed by using a non-abrasive piece of material.

ESAB Pre-Weld anti spatter 600 ml 0700 013 013ESAB Pre-Weld anti spatter 10 litre 0700 013 014ESAB Pre-Weld anti spatter 25 litre 0700 013 015Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB PRE-WELD ANTI SPATTER

The ESAB Jig and Tool protection prolongs the lifetime of the weldingshroud and contact tip as well as giving an extremely good protection totools and jigs. The spray dries quickly and leaves a heat resistant layer(1300ºC) and it does not burn off. Hardly any spatter sticks to the surfaceand if it does, a gentle wipe with the glove will remove it.

ESAB Jig and Tool protection 0700 013 016

ESAB JIG AND TOOL PROTECTION

The ESAB Spatter shield prolongs the lifetime of the welding shroud andcontact tip. Apply the fluid by dipping the torch and let the fluid dry. The fluidcreates a heat resistant layer that prevents spatter from sticking. The spattershield should be applied 2-3 times per 8-hour shift to give the full protection.Unlike tip dip products, when using the ESAB spatter shield you will NOTexperience any problems with porosity created by drops of anti spatterfalling down into the weld.

ESAB Spatter shield 0700 013 017

ESAB SPATTER SHIELD

Page 176: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Anti SpatterAnti Spatter

64 65

The ESAB Eco-Tech is a high performing anti spatter spray, which iscompletely safe, both for the welder as well as for the environment. Thepropellant is compressed air, hence it is completely none-combustible. Thesolvent free liquid should be applied in a thin layer before welding. The Eco-Tech is water based and does not contain anything that can interfere withpainting, galvanising or any other after treatments.

ESAB Eco-Tech anti spatter 300 ml 0700 013 007ESAB Eco-Tech anti spatter 10 litre 0700 013 008ESAB Eco-Tech anti spatter 25 litre 0700 013 009Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB ECO-TECH ANTI SPATTER

Combines uncompromising efficiency with active environmental and healthprotection. The High-Tech spray effectively prevents spatter from sticking on the work piece (or on the welding torch). The High-Tech weld-protect air-spray is absolutely non-combustible, has no toxic classification, uses noharmful gases and is safe for the skin. The propellant is compressed air, it is solvent free and gives no indirect air pollution or contribution to thegreenhouse effect. It is absolutely silicon-free and water-soluble. The designof the aluminium can and valve make it possible to spray in all positions.High-Tech contains no dangerous or harmful substances according to88/379/EEC.

High-Tech 400 ml 0760 025 500High-Tech 10 litre 0760 025 010High-Tech 25 litre 0760 025 025Hand spray bottle 0000 138 408

ESAB HIGH-TECH ANTI SPATTER

The ESAB Pre-Weld fluid is so much more than a traditional anti spatter.ESAB have managed to develop a product that has a much higherconcentration of the active substance than any other product available. The product does not evaporate off the work piece, it gives extraordinaryprotection all the way from the very edge of the weld and out across the work piece. But still the product is vegetable oil and completely safe, nodangerous/harmful substances are included. The fluid is absolutely siliconfree and water-soluble, there are no problems with painting or with any other after treatments.

The spray can contains 600 ml of active fluid, no solvents. The fluid is kept inan aluminium bag inside the can. The pressure surrounding the bag forces thefluid out when the valve is opened. This allows the can to be sprayed at anangle and still allows you to get every drop of fluid from the can. Note that it isonly active fluid that is released, this is what makes the product so efficient.

When welding stainless steel the ESAB Pre-Weld can eliminate the need of pickling paste. If the fluid is applied before welding and again when thematerial has cooled down, the discolouring can be removed by using a non-abrasive piece of material.

ESAB Pre-Weld anti spatter 600 ml 0700 013 013ESAB Pre-Weld anti spatter 10 litre 0700 013 014ESAB Pre-Weld anti spatter 25 litre 0700 013 015Tap for 10 litre 0700 014 017Tap for 25 litre 0700 014 018Hand spray bottle 0000 138 408

ESAB PRE-WELD ANTI SPATTER

The ESAB Jig and Tool protection prolongs the lifetime of the weldingshroud and contact tip as well as giving an extremely good protection totools and jigs. The spray dries quickly and leaves a heat resistant layer(1300ºC) and it does not burn off. Hardly any spatter sticks to the surfaceand if it does, a gentle wipe with the glove will remove it.

ESAB Jig and Tool protection 0700 013 016

ESAB JIG AND TOOL PROTECTION

The ESAB Spatter shield prolongs the lifetime of the welding shroud andcontact tip. Apply the fluid by dipping the torch and let the fluid dry. The fluidcreates a heat resistant layer that prevents spatter from sticking. The spattershield should be applied 2-3 times per 8-hour shift to give the full protection.Unlike tip dip products, when using the ESAB spatter shield you will NOTexperience any problems with porosity created by drops of anti spatterfalling down into the weld.

ESAB Spatter shield 0700 013 017

ESAB SPATTER SHIELD

Page 177: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Chemical Sundries & IndicatorsAnti Spatter, Chemical Sundries & Indicators

66 67

Prevents spatter from sticking as it forms a heat-resistant coat. The hot gasnozzle on the welding torch should be dipped about 20-25mm into the pastefor effective results. Applied to tools and fixtures with a paintbrush and preventsthe torch nozzle becoming blocked, the gun should be hung up with the nozzlefacing downward after use. Odourless and contains no solvents, silicone orabrasive agents and is delivered in a 0.5kg metal can. Considered nonhazardous according to the EU Dangerous Substances/Preparations Directivesclassification scheme (67/548/EEG, last amended by EU Directive 1999/45/EG.

Clean Weld welding paste, net weight 0.5kg 0365 560 001

CLEAN WELD WELDING PASTE

This system enables the testing of welds for flaws and fractures withoutdestroying the welded structure. Murex NDT Sprays do not contain 1.1.1Trichlorethane.

NDT Penetrant 300 ml aerosol 0701 500 012NDT Developer 400 ml Aerosol 0701 500 013NDT Cleaner 300 ml Aerosol 0701 500 014

MUREX NON DESTRUCTIVE TESTING

Murex leak detector is suitable for gas inspection checks. Water based andnon-toxic.

Leak Detector Pistol Type 0701 414 030TL4 Leak Detector Aerosol 0269 111 176

MUREX LEAK DETECTOR

These temperature sticks mark the surface of the piece to be heated withthe appropriate temperature. The mark has a dull, chalky appearance. Whenthe desired temperature is reached, the mark quickly dissolves into a glossy,transparent liquid. This glossy appearance is retained after cooling. Ignoreany colour change, melting is the only sign that the correct temperature hasbeen reached.

Indicator 52°C 0000 916 120Indicator 73°C 0000 916 121Indicator 152°C 0000 916 124Indicator 253°C 0000 916 127Indicator 132°C 0000 916 128Indicator 371°C 0000 916 130Indicator 166°C 0000 916 131

TEMPERATURE INDICATORS

Apply the ESAB mask spray on the inner and outer protective lens to keep itmist free.

Mask spray 0000 595 312

ESAB MASK SPRAY

ESAB’s UV skin-protection cream protects the parts of the body that areexposed to UV rays during welding or welding inspections. This cream isalso water-resistant. Sunshade factor 19. 100 ml.

Protective cream 0349 501 033

PROTECTIVE UV-CREAM

The ESAB weld marker marks all metal, wood, plastic, glass and hardsurfaces. Low chloride colour makes it safe for marking stainless steel andnuclear applications. Do not roll tube. Dries in five minutes.

ESAB Weld marker, white 0700 013 003Murex Metal Marker Yellow 0701 415 418

WELD MARKER

The weld marker kit consists of three differently coloured pens, red, greenand black. The pens can be used on most types of material.

Weld marker kit 0700 013 004

WELD MARKER KIT

Page 178: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Chemical Sundries & IndicatorsAnti Spatter, Chemical Sundries & Indicators

66 67

Prevents spatter from sticking as it forms a heat-resistant coat. The hot gasnozzle on the welding torch should be dipped about 20-25mm into the pastefor effective results. Applied to tools and fixtures with a paintbrush and preventsthe torch nozzle becoming blocked, the gun should be hung up with the nozzlefacing downward after use. Odourless and contains no solvents, silicone orabrasive agents and is delivered in a 0.5kg metal can. Considered nonhazardous according to the EU Dangerous Substances/Preparations Directivesclassification scheme (67/548/EEG, last amended by EU Directive 1999/45/EG.

Clean Weld welding paste, net weight 0.5kg 0365 560 001

CLEAN WELD WELDING PASTE

This system enables the testing of welds for flaws and fractures withoutdestroying the welded structure. Murex NDT Sprays do not contain 1.1.1Trichlorethane.

NDT Penetrant 300 ml aerosol 0701 500 012NDT Developer 400 ml Aerosol 0701 500 013NDT Cleaner 300 ml Aerosol 0701 500 014

MUREX NON DESTRUCTIVE TESTING

Murex leak detector is suitable for gas inspection checks. Water based andnon-toxic.

Leak Detector Pistol Type 0701 414 030TL4 Leak Detector Aerosol 0269 111 176

MUREX LEAK DETECTOR

These temperature sticks mark the surface of the piece to be heated withthe appropriate temperature. The mark has a dull, chalky appearance. Whenthe desired temperature is reached, the mark quickly dissolves into a glossy,transparent liquid. This glossy appearance is retained after cooling. Ignoreany colour change, melting is the only sign that the correct temperature hasbeen reached.

Indicator 52°C 0000 916 120Indicator 73°C 0000 916 121Indicator 152°C 0000 916 124Indicator 253°C 0000 916 127Indicator 132°C 0000 916 128Indicator 371°C 0000 916 130Indicator 166°C 0000 916 131

TEMPERATURE INDICATORS

Apply the ESAB mask spray on the inner and outer protective lens to keep itmist free.

Mask spray 0000 595 312

ESAB MASK SPRAY

ESAB’s UV skin-protection cream protects the parts of the body that areexposed to UV rays during welding or welding inspections. This cream isalso water-resistant. Sunshade factor 19. 100 ml.

Protective cream 0349 501 033

PROTECTIVE UV-CREAM

The ESAB weld marker marks all metal, wood, plastic, glass and hardsurfaces. Low chloride colour makes it safe for marking stainless steel andnuclear applications. Do not roll tube. Dries in five minutes.

ESAB Weld marker, white 0700 013 003Murex Metal Marker Yellow 0701 415 418

WELD MARKER

The weld marker kit consists of three differently coloured pens, red, greenand black. The pens can be used on most types of material.

Weld marker kit 0700 013 004

WELD MARKER KIT

Page 179: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Chipping Hammers Chipping Hammers & Fillet Gauges

68 69

This high impact speed chipping hammer produces virtually no vibration inthe hand as a result of a built-in balance system, which absorbs recoil andcounteracts shaking. A range of chisels are available for the HCB, they allhave a tungsten-carbide tip and offer a long service life. Narrow chisel: 15mm wide for normal de-slagging and cleaning. Wide chisel: 35mm widefor removing spatter and de-burring after gas cutting.

Chipping hammer HCB 0193 305 001Chisel 15 x 100mm 0156 627 001Chisel 35 x 100mm 0156 627 002Chisel 15 x 200mm 0156 627 006Chisel 15 x 300mm 0156 627 007Sound-damping chisel 0156 627 004Chisel extension 0156 627 005O-Ring HCA/HCB 0156 626 009O-Ring HCA/HCB 0156 626 011Locking Ring HCA/HCB 0156 626 012Tube Compl HCA/HCB 0156 626 015Spring HCA/HCB 0156 626 017O-Ring HCA/HCB 0156 626 018O-Ring HCA/HCB 0156 626 019O-Ring HCA/HCB 0156 626 021Cover HCA/HCB 0156 626 023Securing Ring HCA/HCB 0156 626 025O-Ring HCA/HCB 0156 626 029Stopscrew HCA/HCB 0156 626 030O-Ring HCA/HCB 0156 626 033Shaft Extension HCB 185mm 0156 627 005O-Ring HCB 0193 306 014Clamp Ring HCA/HCB 0156 626 034Front Housing HCB 0193 306 004Valve Piston 0156 626 020Ball Retainer 0156 626 022Spring HCA/HCB 0156 626 026Inpact Piston Compl. 0156 626 004Ring Valve HCA/HCB 0156 626 010Air Feed Valve 0193 306 012Balancing Piston HCA/HCB 0156 626 013Housing HCA/HCB 0156 626 014Trigger HCA/HCB 0156 626 016Washer HCA/HCB 0156 626 024Sleeve HCA/HCB 0156 626 028

PNEUMATIC CHIPPING HAMMER HCB

The SH2 chipping hammer is made of special high-quality steel, and has auser-friendly handle. The SH3 is a small hammer with a chisel and tip andsteel handle with a plastic grip.

Chipping hammer SH2 0000 663 000Chipping hammer SH3 0683 200 001

CHIPPING HAMMER SH2 AND SH3

High quality tempered head and wooden handle. Chisel and point ends.

Martellina wood 0000 915 051Wooden Chipping Hammer TH/5 0701 380 106

WOODEN CHIPPING HAMMERS

To measure the A dimension of fillet welds. Two measurement areas: max. 7mm and max. 15mm. Complete with a leather pocket.

Fillet gauge KL-1 laser 0000 139 931

FILLET GAUGE KL-1 LASER

To measure the A dimension of a fillet welds, the leg (small side of a right-angled triangle) and weld reinforcement height. Complete with leather pocket.

Fillet gauge KL-2 laser 0000 139 932

FILLET GAUGE KL-2 LASER

Page 180: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Chipping Hammers Chipping Hammers & Fillet Gauges

68 69

This high impact speed chipping hammer produces virtually no vibration inthe hand as a result of a built-in balance system, which absorbs recoil andcounteracts shaking. A range of chisels are available for the HCB, they allhave a tungsten-carbide tip and offer a long service life. Narrow chisel: 15mm wide for normal de-slagging and cleaning. Wide chisel: 35mm widefor removing spatter and de-burring after gas cutting.

Chipping hammer HCB 0193 305 001Chisel 15 x 100mm 0156 627 001Chisel 35 x 100mm 0156 627 002Chisel 15 x 200mm 0156 627 006Chisel 15 x 300mm 0156 627 007Sound-damping chisel 0156 627 004Chisel extension 0156 627 005O-Ring HCA/HCB 0156 626 009O-Ring HCA/HCB 0156 626 011Locking Ring HCA/HCB 0156 626 012Tube Compl HCA/HCB 0156 626 015Spring HCA/HCB 0156 626 017O-Ring HCA/HCB 0156 626 018O-Ring HCA/HCB 0156 626 019O-Ring HCA/HCB 0156 626 021Cover HCA/HCB 0156 626 023Securing Ring HCA/HCB 0156 626 025O-Ring HCA/HCB 0156 626 029Stopscrew HCA/HCB 0156 626 030O-Ring HCA/HCB 0156 626 033Shaft Extension HCB 185mm 0156 627 005O-Ring HCB 0193 306 014Clamp Ring HCA/HCB 0156 626 034Front Housing HCB 0193 306 004Valve Piston 0156 626 020Ball Retainer 0156 626 022Spring HCA/HCB 0156 626 026Inpact Piston Compl. 0156 626 004Ring Valve HCA/HCB 0156 626 010Air Feed Valve 0193 306 012Balancing Piston HCA/HCB 0156 626 013Housing HCA/HCB 0156 626 014Trigger HCA/HCB 0156 626 016Washer HCA/HCB 0156 626 024Sleeve HCA/HCB 0156 626 028

PNEUMATIC CHIPPING HAMMER HCB

The SH2 chipping hammer is made of special high-quality steel, and has auser-friendly handle. The SH3 is a small hammer with a chisel and tip andsteel handle with a plastic grip.

Chipping hammer SH2 0000 663 000Chipping hammer SH3 0683 200 001

CHIPPING HAMMER SH2 AND SH3

High quality tempered head and wooden handle. Chisel and point ends.

Martellina wood 0000 915 051Wooden Chipping Hammer TH/5 0701 380 106

WOODEN CHIPPING HAMMERS

To measure the A dimension of fillet welds. Two measurement areas: max. 7mm and max. 15mm. Complete with a leather pocket.

Fillet gauge KL-1 laser 0000 139 931

FILLET GAUGE KL-1 LASER

To measure the A dimension of a fillet welds, the leg (small side of a right-angled triangle) and weld reinforcement height. Complete with leather pocket.

Fillet gauge KL-2 laser 0000 139 932

FILLET GAUGE KL-2 LASER

Page 181: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Fillet Gauges & Small Tools Small Tools

70 71

To measure the a-dimension on measurement area 3-11mm, K-dimensionand 50 and 60’ groove angle. Also on fast measurement 4, 5, 6 and 7mma-dimension and gaps of 1.5, 2 and 3.5mm

Filarc Fillet gauge 0000 593 268

FILARC FILLET GAUGE

To measure the a-dimension of fillet welds and to measure the butted jointweld reinforcement height. Equipped with three scales. Measurement area0-15mm and measurement sharpness +0,1mm

INOX Fillet gauge 0000 593 720

INOX FILLET GAUGE

A general purpose Fillet Gauge

Fillet Gauge 0701 414 769

MUREX FILLET GAUGE

Pliers specially designed for MIG/MAG welding. Removes spatter from thenozzle, cuts the wire and the tool makes it easy to remove the contact tipand gas shroud.

Universal TopTool 0000 134 716Universal TopTool Mini 0000 139 054

UNIVERSAL TOPTOOL

Fast effective cutting of welding wire and removal of burnt wire. Removesspatter from gas and contact nozzle and can be used for attaching andremoving of contact, intermediate and gas nozzles.

Fix 1 12-15mm 0760 022 100Fix 2 15-18mm 0760 022 200

FIX PLIERS

Stainless steel inspection mirror for inspecting welds.

Inspection mirror 500mm, with magnetic base 0000 595 319

INSPECTION MIRRORS

The MIG/MAG gun holder is simple and practical device for the convenientholding of the MIG/MAG gun when not in use. It is equipped with amagnetic foot for stability and is suitable for use with most MIG/MAGwelding guns.

MIG/MAG gun holder 0760 022 300

MIG/MAG GUN HOLDER

The TIG torch holder is a simple and practical device for the convenientholding of the TIG torch when not in use. It is equipped with a magnetic footfor stability and is suitable for use with most TIG torches.

TIG torch holder 0760 022 400

TIG TORCH HOLDER

Page 182: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Fillet Gauges & Small Tools Small Tools

70 71

To measure the a-dimension on measurement area 3-11mm, K-dimensionand 50 and 60’ groove angle. Also on fast measurement 4, 5, 6 and 7mma-dimension and gaps of 1.5, 2 and 3.5mm

Filarc Fillet gauge 0000 593 268

FILARC FILLET GAUGE

To measure the a-dimension of fillet welds and to measure the butted jointweld reinforcement height. Equipped with three scales. Measurement area0-15mm and measurement sharpness +0,1mm

INOX Fillet gauge 0000 593 720

INOX FILLET GAUGE

A general purpose Fillet Gauge

Fillet Gauge 0701 414 769

MUREX FILLET GAUGE

Pliers specially designed for MIG/MAG welding. Removes spatter from thenozzle, cuts the wire and the tool makes it easy to remove the contact tipand gas shroud.

Universal TopTool 0000 134 716Universal TopTool Mini 0000 139 054

UNIVERSAL TOPTOOL

Fast effective cutting of welding wire and removal of burnt wire. Removesspatter from gas and contact nozzle and can be used for attaching andremoving of contact, intermediate and gas nozzles.

Fix 1 12-15mm 0760 022 100Fix 2 15-18mm 0760 022 200

FIX PLIERS

Stainless steel inspection mirror for inspecting welds.

Inspection mirror 500mm, with magnetic base 0000 595 319

INSPECTION MIRRORS

The MIG/MAG gun holder is simple and practical device for the convenientholding of the MIG/MAG gun when not in use. It is equipped with amagnetic foot for stability and is suitable for use with most MIG/MAGwelding guns.

MIG/MAG gun holder 0760 022 300

MIG/MAG GUN HOLDER

The TIG torch holder is a simple and practical device for the convenientholding of the TIG torch when not in use. It is equipped with a magnetic footfor stability and is suitable for use with most TIG torches.

TIG torch holder 0760 022 400

TIG TORCH HOLDER

Page 183: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Small Tools Small Tools

72 73

For use with Murex gas equipment. Fits kennedy nut, hose nut and cylinder valve.

Combination Spanner 0701 414 766

MUREX COMBINATION SPANNER

Provides the correct leverage for opening cylinder valves.

Spindle Key K5 0701 380 120

MUREX SPINDLE KEY

A standard cup type sparklighter.

SL3 Cup Sparklighter 0701 380 220SL3 Flints Pk 5 0701 380 221

MUREX SL3 CUP SPARKLIGHTER

The powerful magnets keep the work piece in place when welding orsoldering plates together at angles. The large model can support weights up to 80kg whilst the small one can support of up to 45kg.

Magnetic position holder small 0700 014 015Magnetic position holder large 0700 014 016

MAGNETIC POSITION HOLDERS

A pistol type sparklighter

SL2 Sparklighter Pistol 0700 154 807Flints Pk9 (SL2) 0700 119 695

MUREX SL2 SPARKLIGHTER PISTOL

Prolongs the life of welding and cutting nozzles. Murex nozzle cleaner doesnot file the nozzle bore. Each set contains a range of nozzle cleaners from0.46mm to 1.74mm.

Nozzle Cleaner Set 0700 153 391

MUREX NOZZLE CLEANER SET

Lightweight, easy-to-use steel brushes with wooden handles. Available withtwo, three or four rows of bristles.

Two-row mild steel brush 0760 024 100Three-row mild steel brush 0760 024 200Four-row mild steel brush 0760 024 300Two-row stainless steel brush 0760 024 500Three-row stainless steel brush 0760 024 600Four-row stainless steel brush 0760 024 700

WIRE BRUSHES

Page 184: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Small Tools Small Tools

72 73

For use with Murex gas equipment. Fits kennedy nut, hose nut and cylinder valve.

Combination Spanner 0701 414 766

MUREX COMBINATION SPANNER

Provides the correct leverage for opening cylinder valves.

Spindle Key K5 0701 380 120

MUREX SPINDLE KEY

A standard cup type sparklighter.

SL3 Cup Sparklighter 0701 380 220SL3 Flints Pk 5 0701 380 221

MUREX SL3 CUP SPARKLIGHTER

The powerful magnets keep the work piece in place when welding orsoldering plates together at angles. The large model can support weights up to 80kg whilst the small one can support of up to 45kg.

Magnetic position holder small 0700 014 015Magnetic position holder large 0700 014 016

MAGNETIC POSITION HOLDERS

A pistol type sparklighter

SL2 Sparklighter Pistol 0700 154 807Flints Pk9 (SL2) 0700 119 695

MUREX SL2 SPARKLIGHTER PISTOL

Prolongs the life of welding and cutting nozzles. Murex nozzle cleaner doesnot file the nozzle bore. Each set contains a range of nozzle cleaners from0.46mm to 1.74mm.

Nozzle Cleaner Set 0700 153 391

MUREX NOZZLE CLEANER SET

Lightweight, easy-to-use steel brushes with wooden handles. Available withtwo, three or four rows of bristles.

Two-row mild steel brush 0760 024 100Three-row mild steel brush 0760 024 200Four-row mild steel brush 0760 024 300Two-row stainless steel brush 0760 024 500Three-row stainless steel brush 0760 024 600Four-row stainless steel brush 0760 024 700

WIRE BRUSHES

Page 185: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Cylinder Trolleys ESAB Drying Equipment

74 75

The PK 1 is a light and handy dry-storage container for electrodes. It is easyto carry and has a storage temperature of around 100ºC. The heatingelement runs from the top to the bottom and the top is fully insulated.

Capacity 9kgStorage temp. (°C) 100Drying temp. (°C) N/AVoltage (V) 24/42/110/230Output (kW) 0,1Outer dimension (Ø/height, mm) 225/610Inner dimension (Ø/height, mm) 100/470Weight (kg) 6

PK 1, 24 V 0000 515 063PK 1, 42 V 0000 515 052PK 1, 110 V 0000 515 062PK 1, 230 V 0000 515 064

PK 1 DRY-STORAGE CONTAINER

The PK 5 is a combined drying and dry-storage system for most types ofelectrodes. The drying time at full effect is 1-7 hours depending on the type ofelectrode. The temperature is thermostatically controlled and ranges from 50-300°C. The electrodes should be stored in the PK 5 without packaging. Theheating element runs from the top to the bottom and the top is fully insulated.

Capacity 24kgStorage temp. (°C) 70-300Drying temp. (°C) N/AVoltage (V) 110/230Output (kW) 0,5Outer dimension (Ø/height, mm) 345/660Inner dimension (Ø/height, mm) 116/460Weight (kg) 13

PK 5 drying equipment, 110 V 0700 011 070PK 5 drying equipment, 230 V 0000 515 075

PK 5 DRYING EQUIPMENT

Takes one oxygen and one Acetylene cylinder.

TR3 Trolley 0700 123 772

TR3 TROLLEY

Takes one oxygen and one Propane cylinder.

Oxy/Propane Trolley 0700 151 549

OXY/PROPANE TROLLEY

Takes one standard cylinder

Universal Single Trolley 0700 153 384

UNIVERSAL SINGLE TROLLEY

All Murex cylinder Trolleys have a hardwearing red epoxy coated finish and chains to hold thecylinder upright. Large rugged wheels mean the trolley can be wheeled over the roughest ground.

CYLINDER TROLLEYS

The SK 40 is a dry-storage cabinet with 4 removable shelves for storingelectrodes. The electrodes should be stored without packing. The cabinet isequipped with a thermometer, thermostat and control lamp. Temperaturerange 50-180°C.

Capacity 120kgStorage temp. (°C) 50-180Drying temp. (°C) N/AVoltage (V) 230Output (kW) 0,7Outer dimension (WxDxH, mm) 530x640x750Inner dimension (WxDxH, mm) 470x510x520Weight (kg) 55

SK 40 dry-storage cabinet, 230 V 0000 515 102

SK 40 DRY-STORAGE CABINET

Page 186: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Cylinder Trolleys ESAB Drying Equipment

74 75

The PK 1 is a light and handy dry-storage container for electrodes. It is easyto carry and has a storage temperature of around 100ºC. The heatingelement runs from the top to the bottom and the top is fully insulated.

Capacity 9kgStorage temp. (°C) 100Drying temp. (°C) N/AVoltage (V) 24/42/110/230Output (kW) 0,1Outer dimension (Ø/height, mm) 225/610Inner dimension (Ø/height, mm) 100/470Weight (kg) 6

PK 1, 24 V 0000 515 063PK 1, 42 V 0000 515 052PK 1, 110 V 0000 515 062PK 1, 230 V 0000 515 064

PK 1 DRY-STORAGE CONTAINER

The PK 5 is a combined drying and dry-storage system for most types ofelectrodes. The drying time at full effect is 1-7 hours depending on the type ofelectrode. The temperature is thermostatically controlled and ranges from 50-300°C. The electrodes should be stored in the PK 5 without packaging. Theheating element runs from the top to the bottom and the top is fully insulated.

Capacity 24kgStorage temp. (°C) 70-300Drying temp. (°C) N/AVoltage (V) 110/230Output (kW) 0,5Outer dimension (Ø/height, mm) 345/660Inner dimension (Ø/height, mm) 116/460Weight (kg) 13

PK 5 drying equipment, 110 V 0700 011 070PK 5 drying equipment, 230 V 0000 515 075

PK 5 DRYING EQUIPMENT

Takes one oxygen and one Acetylene cylinder.

TR3 Trolley 0700 123 772

TR3 TROLLEY

Takes one oxygen and one Propane cylinder.

Oxy/Propane Trolley 0700 151 549

OXY/PROPANE TROLLEY

Takes one standard cylinder

Universal Single Trolley 0700 153 384

UNIVERSAL SINGLE TROLLEY

All Murex cylinder Trolleys have a hardwearing red epoxy coated finish and chains to hold thecylinder upright. Large rugged wheels mean the trolley can be wheeled over the roughest ground.

CYLINDER TROLLEYS

The SK 40 is a dry-storage cabinet with 4 removable shelves for storingelectrodes. The electrodes should be stored without packing. The cabinet isequipped with a thermometer, thermostat and control lamp. Temperaturerange 50-180°C.

Capacity 120kgStorage temp. (°C) 50-180Drying temp. (°C) N/AVoltage (V) 230Output (kW) 0,7Outer dimension (WxDxH, mm) 530x640x750Inner dimension (WxDxH, mm) 470x510x520Weight (kg) 55

SK 40 dry-storage cabinet, 230 V 0000 515 102

SK 40 DRY-STORAGE CABINET

Page 187: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ESAB Drying Equipment ESAB Drying Equipment

76 77

The PK 40 is a robust cabinet for the drying and dry storage of electrodes,with space for 10 packs. The drying time is set manually at between 50 and350°C. Dimensions 570 x 620 x 790mm. Weight 70kg.

Capacity 72kgDrying temp. (°C) 50-350Voltage (V) 230Output (kW) 1,5Outer dimension (WxDxH, mm) 570x620x790Inner dimension (WxDxH, mm) 460x510x520Weight (kg) 70

PK 40 drying cabinet, 230 V 0000 515 105

PK 40 DRYING CABINET

The JS 200 is a storage silo for welding powder (flux). The JS 200 keeps theflux dry and clean and also makes it extremely easy to handle the flux. Thetemperature can be adjusted between 100 and 300°C.

Capacity 200 LtStorage temp. (°C) 100-300Drying temp. (°C) N/AVoltage (V) 230Output (kW) 2Outer dimension (WxDxH, mm) 510x570x1755Weight (kg) 110

JS 200 storage silo 0000 515 090

JS 200 STORAGE SILO

The JK 50 is a container for drying and storing welding powder (flux). The JK50 dries 50 litre flux at a maximum temperature of 500°C in around threehours. After drying, the temperature falls automatically to the pre-set drystorage temperature (150°C) within 12 hours.

Capacity 50 LtStorage temp. (°C) 50-250Drying temp. (°C) 50-500Voltage (V) 400-3Output (kW) 3,7Outer dimension (Ø/height, mm) 860/1600Weight (kg) 190

JK 50, 400 V, 3-phase 0000 515 091

JK 50 POWDER DRIER

The PK 410 is a robust cabinet for the drying and dry storage of electrodes.The drying temperature can be regulated between 50 and 400°C (450°C 3-phase). The dry-storage temperature is around 150ºC. The PK 410 isequipped with a control lamp, electronic thermometer and electronicthermostat. The PK 410 also has a 7-day timer. This timer makes it possibleto change automatically from drying to dry storage at selected times andtemperature ranges.

230VCapacity 252kgStorage temp. (°C) 50-400Drying temp. (°C) 50-400Voltage (V) 230Output (kW) 3,5Outer dimension (WxDxH, mm) 860x760x1280Inner dimension (WxDxH, mm) 655x485x635Weight (kg) 230

400VCapacity 252kgStorage temp. (°C) 50-400Drying temp. (°C) 50-400Voltage (V) 400-3Output (kW) 4,5Outer dimension (WxDxH, mm) 860-760-1280Inner dimension (WxDxH, mm) 665x485x635Weight (kg) 230

PK 410 drying cabinet, 230 V, 1-phase 0000 515 103PK 410 drying cabinet, 400 V, 3-phase 0000 515 108

PK 410 DRYING CABINET

Page 188: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ESAB Drying Equipment ESAB Drying Equipment

76 77

The PK 40 is a robust cabinet for the drying and dry storage of electrodes,with space for 10 packs. The drying time is set manually at between 50 and350°C. Dimensions 570 x 620 x 790mm. Weight 70kg.

Capacity 72kgDrying temp. (°C) 50-350Voltage (V) 230Output (kW) 1,5Outer dimension (WxDxH, mm) 570x620x790Inner dimension (WxDxH, mm) 460x510x520Weight (kg) 70

PK 40 drying cabinet, 230 V 0000 515 105

PK 40 DRYING CABINET

The JS 200 is a storage silo for welding powder (flux). The JS 200 keeps theflux dry and clean and also makes it extremely easy to handle the flux. Thetemperature can be adjusted between 100 and 300°C.

Capacity 200 LtStorage temp. (°C) 100-300Drying temp. (°C) N/AVoltage (V) 230Output (kW) 2Outer dimension (WxDxH, mm) 510x570x1755Weight (kg) 110

JS 200 storage silo 0000 515 090

JS 200 STORAGE SILO

The JK 50 is a container for drying and storing welding powder (flux). The JK50 dries 50 litre flux at a maximum temperature of 500°C in around threehours. After drying, the temperature falls automatically to the pre-set drystorage temperature (150°C) within 12 hours.

Capacity 50 LtStorage temp. (°C) 50-250Drying temp. (°C) 50-500Voltage (V) 400-3Output (kW) 3,7Outer dimension (Ø/height, mm) 860/1600Weight (kg) 190

JK 50, 400 V, 3-phase 0000 515 091

JK 50 POWDER DRIER

The PK 410 is a robust cabinet for the drying and dry storage of electrodes.The drying temperature can be regulated between 50 and 400°C (450°C 3-phase). The dry-storage temperature is around 150ºC. The PK 410 isequipped with a control lamp, electronic thermometer and electronicthermostat. The PK 410 also has a 7-day timer. This timer makes it possibleto change automatically from drying to dry storage at selected times andtemperature ranges.

230VCapacity 252kgStorage temp. (°C) 50-400Drying temp. (°C) 50-400Voltage (V) 230Output (kW) 3,5Outer dimension (WxDxH, mm) 860x760x1280Inner dimension (WxDxH, mm) 655x485x635Weight (kg) 230

400VCapacity 252kgStorage temp. (°C) 50-400Drying temp. (°C) 50-400Voltage (V) 400-3Output (kW) 4,5Outer dimension (WxDxH, mm) 860-760-1280Inner dimension (WxDxH, mm) 665x485x635Weight (kg) 230

PK 410 drying cabinet, 230 V, 1-phase 0000 515 103PK 410 drying cabinet, 400 V, 3-phase 0000 515 108

PK 410 DRYING CABINET

Page 189: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Murex Drying Equipment Murex Drying Equipment

78 79

Heated Quivers are designed for use on installations with 100 volt or 240 voltsupply. The quiver will maintain an even temperature of 100°C dependant onthe amount of electrodes stored. Complete with handle/stand.

Supply 110v or 110.240v. AC 50/60HzLoad 150 wattsOverall dimensions 120mm Wide x 500mm Deep x 110mm HighWeight Empty 3 KiloCapacity 9kg of Welding Electrodes

Heated Quiver 110 V 0701 380 485Heated Quiver 110 V 0701 380 485Heated Quiver 110/240V 0701 380 486Insulated Heated Quiver 240v 0701 502 358

QUIVERS

This oven is designed for rugged site conditions, where it can be used as either a holding or storage oven.

Temperature range 100-300°C thermostatically controledSupply 110.240v. (Dual voltage)Load 300 wattsOverall dimensions 175mm Wide x 610mm Deep x 210mm HighInternal dimensions 115mm Wide x 480mm Deep x 150mm HighWeight Empty 10 KiloCapacity 13kg of Welding Electrodes

Portable Drying Oven Dual Volt 0701 38 0083

PORTABLE DRYING OVEN-DUAL VOLT

The robust, high temperature oven has a digital display. It has accurate temperature control from 0 – 500ºC. Visualtemperature indication is by the digital display. Temperature settings are digitally set.

High Temp Oven - Digital Display 0701 380 408

As above but with Chart Recorder

High Temp Oven - CR DD Timer 0701 380 410

HIGH TEMPERATURE OVENS

As the Stationary Oven, but with a digital display

Stationary Oven Digital 250V AC 0701 502 381

STATIONARY DRYING OVEN DIGITAL

These ovens can be used as the sole means of drying or as the intermediary, until transferred to a portable oven or a quiver.

Temperature range 100-300°C thermostatically controledSupply 110.240v. (Dual voltage)Load 1500 wattsOverall dimensions 520mm Wide x 620mm Deep x 610mm HighInternal dimensions 455mm Wide x 470mm Deep x 1455mm HighWeight Empty 42 KiloCapacity 136kg of Welding Electrodes

Stationary Drying Oven 250V AC 0700 655 259Stationary Drying Oven 110V AC 0700 655 260

STATIONARY DRYING OVEN

Page 190: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Murex Drying Equipment Murex Drying Equipment

78 79

Heated Quivers are designed for use on installations with 100 volt or 240 voltsupply. The quiver will maintain an even temperature of 100°C dependant onthe amount of electrodes stored. Complete with handle/stand.

Supply 110v or 110.240v. AC 50/60HzLoad 150 wattsOverall dimensions 120mm Wide x 500mm Deep x 110mm HighWeight Empty 3 KiloCapacity 9kg of Welding Electrodes

Heated Quiver 110 V 0701 380 485Heated Quiver 110 V 0701 380 485Heated Quiver 110/240V 0701 380 486Insulated Heated Quiver 240v 0701 502 358

QUIVERS

This oven is designed for rugged site conditions, where it can be used as either a holding or storage oven.

Temperature range 100-300°C thermostatically controledSupply 110.240v. (Dual voltage)Load 300 wattsOverall dimensions 175mm Wide x 610mm Deep x 210mm HighInternal dimensions 115mm Wide x 480mm Deep x 150mm HighWeight Empty 10 KiloCapacity 13kg of Welding Electrodes

Portable Drying Oven Dual Volt 0701 38 0083

PORTABLE DRYING OVEN-DUAL VOLT

The robust, high temperature oven has a digital display. It has accurate temperature control from 0 – 500ºC. Visualtemperature indication is by the digital display. Temperature settings are digitally set.

High Temp Oven - Digital Display 0701 380 408

As above but with Chart Recorder

High Temp Oven - CR DD Timer 0701 380 410

HIGH TEMPERATURE OVENS

As the Stationary Oven, but with a digital display

Stationary Oven Digital 250V AC 0701 502 381

STATIONARY DRYING OVEN DIGITAL

These ovens can be used as the sole means of drying or as the intermediary, until transferred to a portable oven or a quiver.

Temperature range 100-300°C thermostatically controledSupply 110.240v. (Dual voltage)Load 1500 wattsOverall dimensions 520mm Wide x 620mm Deep x 610mm HighInternal dimensions 455mm Wide x 470mm Deep x 1455mm HighWeight Empty 42 KiloCapacity 136kg of Welding Electrodes

Stationary Drying Oven 250V AC 0700 655 259Stationary Drying Oven 110V AC 0700 655 260

STATIONARY DRYING OVEN

Page 191: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Completing the extensive accessory portfolio fromESAB is our Special Process Equipment range,which includes tungsten grinders, gouging torchesand fume extraction units. As with all our products our Special Process Equipment range conforms toall relevant EU legislation and standards.

80 81

Spare Parts

Heating Element, Top 0700 011 071Heating Element, Bottom 0700 011 072

Thermostat 0700 011 073 Contactor 0700 011 074

SPARE PARTS FOR ESAB PK40

EMC-Filter 0700 011 039Heating Element, Top 0700 011 040Heating Element, Bottom 0700 011 041Signal Lamp Green Big 0700 011 042Signal Lamp Red Big 0700 011 043Signal Lamp Red, Small 0700 011 044

Controller 0700 011 045 Sensor 0700 011 046 Timer 0700 011 047 Contactor 0700 011 048 Main Switch 0700 011 049 Auto-Manual Switch 0700 011 050

SPARE PARTS FOR ESAB PK410

Heating Element 0700 011 030 Signal Lamp 0700 011 031

Thermostat 0700 011 032 Thermometer 0700 011 033

SPARE PARTS FOR ESAB JS200

Element Stat Oven 240v Pk 2 0701 380 149Element 110V (Quiver) 0701 380 487Toggle Switch (Quiver) 0701 380 488

Element 240V Kit (Portable Oven) 0701 411 237Thermostat 110/240V (Ovens) 0701 411 240

SPARE PARTS FOR MUREX DRYING EQUIPMENT

Heating Element 24V 0700 011 001Heating Element 42V 0700 011 002Heating Element 110V 0700 011 003Heating Element 230V 0700 011 004 Signal Lamp 24V 0700 011 005Signal Lamp 42V 0700 011 006

Signal Lamp 110V 0700 011 007 Signal Lamp 230V 0700 011 008 Cover 0700 011 010 Knob 0700 011 011 Handle 0700 011 012

SPARE PARTS FOR ESAB PK1

Heating Element 0700 011 015Signal Lamp 0700 011 016

Thermostat 0700 011 017 Thermostat 0700 011 018

SPARE PARTS FOR ESAB PK5

Heating Element 0700 011 020Signal Lamp Red 0700 011 021Signal Lamp Green 0700 011 022

Thermostat 0700 011 023 Thermometer 0700 011 024

SPARE PARTS FOR ESAB SK40

Special ProcessEquipment

Page 192: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Completing the extensive accessory portfolio fromESAB is our Special Process Equipment range,which includes tungsten grinders, gouging torchesand fume extraction units. As with all our products our Special Process Equipment range conforms toall relevant EU legislation and standards.

80 81

Spare Parts

Heating Element, Top 0700 011 071Heating Element, Bottom 0700 011 072

Thermostat 0700 011 073 Contactor 0700 011 074

SPARE PARTS FOR ESAB PK40

EMC-Filter 0700 011 039Heating Element, Top 0700 011 040Heating Element, Bottom 0700 011 041Signal Lamp Green Big 0700 011 042Signal Lamp Red Big 0700 011 043Signal Lamp Red, Small 0700 011 044

Controller 0700 011 045 Sensor 0700 011 046 Timer 0700 011 047 Contactor 0700 011 048 Main Switch 0700 011 049 Auto-Manual Switch 0700 011 050

SPARE PARTS FOR ESAB PK410

Heating Element 0700 011 030 Signal Lamp 0700 011 031

Thermostat 0700 011 032 Thermometer 0700 011 033

SPARE PARTS FOR ESAB JS200

Element Stat Oven 240v Pk 2 0701 380 149Element 110V (Quiver) 0701 380 487Toggle Switch (Quiver) 0701 380 488

Element 240V Kit (Portable Oven) 0701 411 237Thermostat 110/240V (Ovens) 0701 411 240

SPARE PARTS FOR MUREX DRYING EQUIPMENT

Heating Element 24V 0700 011 001Heating Element 42V 0700 011 002Heating Element 110V 0700 011 003Heating Element 230V 0700 011 004 Signal Lamp 24V 0700 011 005Signal Lamp 42V 0700 011 006

Signal Lamp 110V 0700 011 007 Signal Lamp 230V 0700 011 008 Cover 0700 011 010 Knob 0700 011 011 Handle 0700 011 012

SPARE PARTS FOR ESAB PK1

Heating Element 0700 011 015Signal Lamp 0700 011 016

Thermostat 0700 011 017 Thermostat 0700 011 018

SPARE PARTS FOR ESAB PK5

Heating Element 0700 011 020Signal Lamp Red 0700 011 021Signal Lamp Green 0700 011 022

Thermostat 0700 011 023 Thermometer 0700 011 024

SPARE PARTS FOR ESAB SK40

Special ProcessEquipment

Page 193: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Tungsten Grinders Tungsten Grinders

82 83

The G-Tech Handy is an easy to use tungsten electrode grinder. The grindingangle can be adjusted easily, using just one hand. The G-Tech Handy grindselectrodes with dimensions of 1.0 to 4.0mm and it is equipped with a dustfilter. The speed (rpm) can be adjusted and the unit weighs just 2.8kg. The G-Tech Handy is delivered in a durable hard case that makes it easy totransport.

G-Tech Handy, 230 V, 50 Hz 0700 009 883

G-TECH HANDY

1 Motor 230 V 0700 009 0412 ON/Off switch 0700 009 0423 Carbon brush 0700 009 0444 Grinding head 0700 009 0455 Spindle for diamond disc 0700 009 0466 Grinding chamber 0700 009 0477 Guide for electrode holder 0700 009 0488 Allen key 0700 009 0499 Allen screw 0700 009 050

10 Spring 0700 009 05611 grinding position selector 0700 009 05112 Screw 0700 009 05213 Filter housing 0700 009 05314 Filter cover 0700 009 05415 Allen key to fix the filter cover 0700 009 05516 Rubber seal big 0700 009 05717 Screw to fix filter cassette 0700 009 05818 Screw to fix diamond disc 0700 009 05919 Rubber seal small 0700 009 06020 Filter casette 0700 009 02921 Dimond disc 0700 009 02822 Inspection glass 0700 009 03723 Electrode holder 0700 009 03024 Collet body 1,0mm 0700 009 03424 Collet body 1,6mm 0700 009 03124 Collet body 2,0mm 0700 009 03524 Collet body 2,4mm 0700 009 03224 Collet body 3,2mm 0700 009 03324 Collet body 4,0mm 0700 009 036

Case for the machine (not shown) 0700 009 061

SPARES FOR G-TECH HANDY (Fig 9)

SPARES FOR G-TECH HANDY Fig 9

Page 194: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Tungsten Grinders Tungsten Grinders

82 83

The G-Tech Handy is an easy to use tungsten electrode grinder. The grindingangle can be adjusted easily, using just one hand. The G-Tech Handy grindselectrodes with dimensions of 1.0 to 4.0mm and it is equipped with a dustfilter. The speed (rpm) can be adjusted and the unit weighs just 2.8kg. The G-Tech Handy is delivered in a durable hard case that makes it easy totransport.

G-Tech Handy, 230 V, 50 Hz 0700 009 883

G-TECH HANDY

1 Motor 230 V 0700 009 0412 ON/Off switch 0700 009 0423 Carbon brush 0700 009 0444 Grinding head 0700 009 0455 Spindle for diamond disc 0700 009 0466 Grinding chamber 0700 009 0477 Guide for electrode holder 0700 009 0488 Allen key 0700 009 0499 Allen screw 0700 009 050

10 Spring 0700 009 05611 grinding position selector 0700 009 05112 Screw 0700 009 05213 Filter housing 0700 009 05314 Filter cover 0700 009 05415 Allen key to fix the filter cover 0700 009 05516 Rubber seal big 0700 009 05717 Screw to fix filter cassette 0700 009 05818 Screw to fix diamond disc 0700 009 05919 Rubber seal small 0700 009 06020 Filter casette 0700 009 02921 Dimond disc 0700 009 02822 Inspection glass 0700 009 03723 Electrode holder 0700 009 03024 Collet body 1,0mm 0700 009 03424 Collet body 1,6mm 0700 009 03124 Collet body 2,0mm 0700 009 03524 Collet body 2,4mm 0700 009 03224 Collet body 3,2mm 0700 009 03324 Collet body 4,0mm 0700 009 036

Case for the machine (not shown) 0700 009 061

SPARES FOR G-TECH HANDY (Fig 9)

SPARES FOR G-TECH HANDY Fig 9

Page 195: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Tungsten Grinders & Electrodes Tungsten Electrodes

84 85

The ESAB G-Tech is a tungsten-electrode grinder with a unique enclosedwet-grinding system. A wet grinding system is the most effective protectionfrom thoriated tungsten grinding dust. All dust is collected in the liquid andthe risk of oxidation of the electrode is reduced. The grinding angle can beadjusted and the tip can be grind in a 90 degrees angle to make it lesspointed. The small table seen in the picture is not included and is notavailable from ESAB.

G-Tech 230V, 50Hz 0700 009 880G Tech 115V 50Hz (UK) 0700 009 881Gasket 0700 009 001 Diamond Disc, G-Tech (inc nut) 0700 009 002 Liquid 250 ml 0700 009 004 Return Bottle 250 ml 0700 009 005Collet Body 1,0mm G-Tech 0700 009 007Collet Body 1,6mm G-Tech 0700 009 008 Collet Body 2,0mm G-Tech 0700 009 018Collet Body 2,4mm G-Tech 0700 009 009 Collet Body 3,2mm G-Tech 0700 009 010 Collet Body 4,0mm G-Tech 0700 009 011Collet Body 4,8mm G-Tech 0700 009 019 T-Piece 0700 009 012 Spacer Piece 0700 009 013 Liquid 5000 ml 0700 009 015 Accessory box complete 0700 009 016 Waste Container 0700 009 017Accessory box complete 0700 009 020 Inspection Glass 0700 009 037 Kit - Inspection window G-Tech 0700 009 038 Kit - Electrode holder 0700 009 039 Kit - Seal abrasive wheel 0700 009 040

G-TECH and SPARES

The TIG PEN allows the welder to control the tip of the filler wire with greataccuracy even at a long distance from the weld seam and in the processhelps the welder to obtain a higher quality weld. It also eliminates waste ofthe filler wire. The TIG Pen can be used with any wire diameter from 1.0 to3.2mm

TIG PEN 0700 009 026

TIG PEN

This is a high-quality range of tungsten electrodes available in thoriated,ceriated, pure and lanthanated (Gold Plus) versions. ESAB tungstenelectrodes have excellent welding and ignition properties. They are deliveredin plastic boxes, each containing ten electrodes. The standard electrodesare 175mm long, and the Eco range of electrodes are 150mm long.

WT20 1,0 x 175mm (Thoriated) Pk 10 Red 0151 574 001WT20 1,6 x 175mm (Thoriated) Pk 10 Red 0151 574 002WT20 2,4 x 175mm (Thoriated) Pk 10 Red 0151 574 003WT20 3,2 x 175mm (Thoriated) Pk 10 Red 0151 574 004WT20 4,0 x 175mm (Thoriated) Pk 10 Red 0151 574 005W Pure 1,0 x 175mm Pk 10 Green 0151 574 008W Pure 1,6 x 175mm Pk 10 Green 0151 574 009W Pure 2,4 x 175mm Pk 10 Green 0151 574 010W Pure 3,2 x 175mm Pk 10 Green 0151 574 011W Pure 4,0 x 175mm Pk 10 Green 0151 574 012WC20 1,0 x 175mm (Ceriated) Pk 10 Grey 0151 574 036WC20 1,6 x 175mm (Ceriated) Pk 10 Grey 0151 574 037WC20 2,4 x 175mm (Ceriated) Pk 10 Grey 0151 574 038WC20 3,2 x 175mm (Ceriated) Pk 10 Grey 0151 574 039WC20 4,0 x 175mm (Ceriated) Pk 10 Grey 0151 574 040WL15 1,0 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 050WL15 1,6 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 051WL15 2,4 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 052WL15 3,2 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 053WL15 4,0 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 054WL15 4,8 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 055WT20 1,0 x 150mm (Thoriated) Pk 10 Red 0151 574 201WT20 1,6 x 150mm (Thoriated) Pk 10 Red 0151 574 202WT20 2,0 x 150mm (Thoriated) Pk 10 Red 0151 574 244WT20 2,4 x 150mm (Thoriated) Pk 10 Red 0151 574 203WT20 3,2 x 150mm (Thoriated) Pk 10 Red 0151 574 204WT20 4,0 x 150mm (Thoriated) Pk 10 Red 0151 574 205W Pure 1,0 x 150mm Pk 10 Green 0151 574 208W Pure 1,6 x 150mm Pk 10 Green 0151 574 209W Pure 2,0 x 150mm Pk 10 Green 0151 574 245W Pure 2,4 x 150mm Pk 10 Green 0151 574 210W Pure 3,2 x 150mm Pk 10 Green 0151 574 211W Pure 4,0 x 150mm Pk 10 Green 0151 574 212WC20 1,0 x 150mm (Ceriated) Pk 10 Grey 0151 574 236WC20 1,6 x 150mm (Ceriated) Pk 10 Grey 0151 574 237WC20 2,0 x 150mm (Ceriated) Pk 10 Grey 0151 574 242WC20 2,4 x 150mm (Ceriated) Pk 10 Grey 0151 574 238WC20 3,2 x 150mm (Ceriated) Pk 10 Grey 0151 574 239WC20 4,0 x 150mm (Ceriated) Pk 10 Grey 0151 574 240

TUNGSTEN ELECTRODES

Page 196: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Tungsten Grinders & Electrodes Tungsten Electrodes

84 85

The ESAB G-Tech is a tungsten-electrode grinder with a unique enclosedwet-grinding system. A wet grinding system is the most effective protectionfrom thoriated tungsten grinding dust. All dust is collected in the liquid andthe risk of oxidation of the electrode is reduced. The grinding angle can beadjusted and the tip can be grind in a 90 degrees angle to make it lesspointed. The small table seen in the picture is not included and is notavailable from ESAB.

G-Tech 230V, 50Hz 0700 009 880G Tech 115V 50Hz (UK) 0700 009 881Gasket 0700 009 001 Diamond Disc, G-Tech (inc nut) 0700 009 002 Liquid 250 ml 0700 009 004 Return Bottle 250 ml 0700 009 005Collet Body 1,0mm G-Tech 0700 009 007Collet Body 1,6mm G-Tech 0700 009 008 Collet Body 2,0mm G-Tech 0700 009 018Collet Body 2,4mm G-Tech 0700 009 009 Collet Body 3,2mm G-Tech 0700 009 010 Collet Body 4,0mm G-Tech 0700 009 011Collet Body 4,8mm G-Tech 0700 009 019 T-Piece 0700 009 012 Spacer Piece 0700 009 013 Liquid 5000 ml 0700 009 015 Accessory box complete 0700 009 016 Waste Container 0700 009 017Accessory box complete 0700 009 020 Inspection Glass 0700 009 037 Kit - Inspection window G-Tech 0700 009 038 Kit - Electrode holder 0700 009 039 Kit - Seal abrasive wheel 0700 009 040

G-TECH and SPARES

The TIG PEN allows the welder to control the tip of the filler wire with greataccuracy even at a long distance from the weld seam and in the processhelps the welder to obtain a higher quality weld. It also eliminates waste ofthe filler wire. The TIG Pen can be used with any wire diameter from 1.0 to3.2mm

TIG PEN 0700 009 026

TIG PEN

This is a high-quality range of tungsten electrodes available in thoriated,ceriated, pure and lanthanated (Gold Plus) versions. ESAB tungstenelectrodes have excellent welding and ignition properties. They are deliveredin plastic boxes, each containing ten electrodes. The standard electrodesare 175mm long, and the Eco range of electrodes are 150mm long.

WT20 1,0 x 175mm (Thoriated) Pk 10 Red 0151 574 001WT20 1,6 x 175mm (Thoriated) Pk 10 Red 0151 574 002WT20 2,4 x 175mm (Thoriated) Pk 10 Red 0151 574 003WT20 3,2 x 175mm (Thoriated) Pk 10 Red 0151 574 004WT20 4,0 x 175mm (Thoriated) Pk 10 Red 0151 574 005W Pure 1,0 x 175mm Pk 10 Green 0151 574 008W Pure 1,6 x 175mm Pk 10 Green 0151 574 009W Pure 2,4 x 175mm Pk 10 Green 0151 574 010W Pure 3,2 x 175mm Pk 10 Green 0151 574 011W Pure 4,0 x 175mm Pk 10 Green 0151 574 012WC20 1,0 x 175mm (Ceriated) Pk 10 Grey 0151 574 036WC20 1,6 x 175mm (Ceriated) Pk 10 Grey 0151 574 037WC20 2,4 x 175mm (Ceriated) Pk 10 Grey 0151 574 038WC20 3,2 x 175mm (Ceriated) Pk 10 Grey 0151 574 039WC20 4,0 x 175mm (Ceriated) Pk 10 Grey 0151 574 040WL15 1,0 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 050WL15 1,6 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 051WL15 2,4 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 052WL15 3,2 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 053WL15 4,0 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 054WL15 4,8 x 175mm Gold Plus (Lanthanated) Pk 10 Gold 0151 574 055WT20 1,0 x 150mm (Thoriated) Pk 10 Red 0151 574 201WT20 1,6 x 150mm (Thoriated) Pk 10 Red 0151 574 202WT20 2,0 x 150mm (Thoriated) Pk 10 Red 0151 574 244WT20 2,4 x 150mm (Thoriated) Pk 10 Red 0151 574 203WT20 3,2 x 150mm (Thoriated) Pk 10 Red 0151 574 204WT20 4,0 x 150mm (Thoriated) Pk 10 Red 0151 574 205W Pure 1,0 x 150mm Pk 10 Green 0151 574 208W Pure 1,6 x 150mm Pk 10 Green 0151 574 209W Pure 2,0 x 150mm Pk 10 Green 0151 574 245W Pure 2,4 x 150mm Pk 10 Green 0151 574 210W Pure 3,2 x 150mm Pk 10 Green 0151 574 211W Pure 4,0 x 150mm Pk 10 Green 0151 574 212WC20 1,0 x 150mm (Ceriated) Pk 10 Grey 0151 574 236WC20 1,6 x 150mm (Ceriated) Pk 10 Grey 0151 574 237WC20 2,0 x 150mm (Ceriated) Pk 10 Grey 0151 574 242WC20 2,4 x 150mm (Ceriated) Pk 10 Grey 0151 574 238WC20 3,2 x 150mm (Ceriated) Pk 10 Grey 0151 574 239WC20 4,0 x 150mm (Ceriated) Pk 10 Grey 0151 574 240

TUNGSTEN ELECTRODES

Page 197: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Gouging TorchesGouging Torches

86 87

The arc air gouging torch is supplied with a 2.14m (7’) long cable. The torchaccepts both round and flat electrodes, ranging in size from 4 mm (5/32”) to13 mm (1/2”) round electrodes and 10 mm (3/8”) and 16 mm (5/6”) flatelectrodes. The K4000 is rated at 1,000 Amps, it uses compressed airbetween 5.6 and 7.0 kg/cm2 (80 and 100 psi) and between 0.85 and 0.99m3/min (30 and 35 cfm). The torch and cable weigh 2.4kg (5.4lbs).

Gouging torch including monocable 0760 018 100 K4000 torch 0760 018 110Mono cable K4000 0760 018 119

1 & 2 Insulator assy 0760 018 101 3 & 4 Levery assy 0760 018 103 5 to 8 Valve bonnet assy 0760 018 106

9 Upper arm 0760 018 112 10 & 11 Nozzle 0760 018 113

12 Body 0760 018 115 13 Hinge pin 0760 018 116 14 Spring 0760 018 117 15 Handle 0760 018 118

Spares for Monocable

‘O’ Ring kit 0760 018 121Clamp kit 0760 018 125Conductor kit 0760 018 126Hose cover 0760 018 130Book insulator 0768 018 131

K4000 (Fig 10)

SPARES FOR K4000 Fig 10SPARES FOR FLAIR 600 Fig 11

1 Set of screws 0468 253 0012 Insulating Caps 0468 253 0023 Brass Lever 0468 253 0034 Injection Nozzle 0160 580 0016 Lever Insulation 0468 253 0067 Spring 0468 253 0078 Hinge Pin 0468 253 0089 Body 0468 253 005

10 Valve 0468 253 01015 & 16 Valve Seat 0468 253 009

11,12,14 Push Button + Link 0468 253 01413 Handle 0468 253 013

SPARES FOR FLAIR 600 (Fig 11)

The Flair 600 arc air torch for carbon up to 10 mm (3/4”) and 4 x 15mm (5/32 x 9/16”) rectangular. The Flair 1600 arc air torch for carbon up to 19mm(3/4”) and 5 x 20mm (3/16 x 3/4”) rectangular.

Flair 600, incl monocable 0468 253 880Torch only 0468 253 016Monocable only 0468 253 015

Flair 1600, incl monocable 0468 253 881Torch only 0468 253 036Monocable only 0468 253 035

FLAIR 600 AND 1600

Page 198: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Gouging TorchesGouging Torches

86 87

The arc air gouging torch is supplied with a 2.14m (7’) long cable. The torchaccepts both round and flat electrodes, ranging in size from 4 mm (5/32”) to13 mm (1/2”) round electrodes and 10 mm (3/8”) and 16 mm (5/6”) flatelectrodes. The K4000 is rated at 1,000 Amps, it uses compressed airbetween 5.6 and 7.0 kg/cm2 (80 and 100 psi) and between 0.85 and 0.99m3/min (30 and 35 cfm). The torch and cable weigh 2.4kg (5.4lbs).

Gouging torch including monocable 0760 018 100 K4000 torch 0760 018 110Mono cable K4000 0760 018 119

1 & 2 Insulator assy 0760 018 101 3 & 4 Levery assy 0760 018 103 5 to 8 Valve bonnet assy 0760 018 106

9 Upper arm 0760 018 112 10 & 11 Nozzle 0760 018 113

12 Body 0760 018 115 13 Hinge pin 0760 018 116 14 Spring 0760 018 117 15 Handle 0760 018 118

Spares for Monocable

‘O’ Ring kit 0760 018 121Clamp kit 0760 018 125Conductor kit 0760 018 126Hose cover 0760 018 130Book insulator 0768 018 131

K4000 (Fig 10)

SPARES FOR K4000 Fig 10SPARES FOR FLAIR 600 Fig 11

1 Set of screws 0468 253 0012 Insulating Caps 0468 253 0023 Brass Lever 0468 253 0034 Injection Nozzle 0160 580 0016 Lever Insulation 0468 253 0067 Spring 0468 253 0078 Hinge Pin 0468 253 0089 Body 0468 253 005

10 Valve 0468 253 01015 & 16 Valve Seat 0468 253 009

11,12,14 Push Button + Link 0468 253 01413 Handle 0468 253 013

SPARES FOR FLAIR 600 (Fig 11)

The Flair 600 arc air torch for carbon up to 10 mm (3/4”) and 4 x 15mm (5/32 x 9/16”) rectangular. The Flair 1600 arc air torch for carbon up to 19mm(3/4”) and 5 x 20mm (3/16 x 3/4”) rectangular.

Flair 600, incl monocable 0468 253 880Torch only 0468 253 016Monocable only 0468 253 015

Flair 1600, incl monocable 0468 253 881Torch only 0468 253 036Monocable only 0468 253 035

FLAIR 600 AND 1600

Page 199: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Gouging TorchesGouging Torches

88 89

SPARES FOR FLAIR 1600 Fig 12

1 Set of screws 0468 253 0012 Insulating Caps 0468 253 0023 Brass Lever 0468 253 0234 Injection Nozzle 0468 253 0246 Lever Insulation 0468 253 0067 Spring 0468 253 0278 Hinge Pin 0468 253 0089 Body 0468 253 025

10 Valve 0468 253 01015 & 18 Valve Seat 0468 253 009

11,12,14 Push Button + Link 0468 253 01413,16,17 Handle 0468 253 033

SPARES FOR FLAIR 1600 (Fig 12)

Arc air gouging with carbon electrodes and compressed air is the fastestand cheapest process for cutting/gouging material in conjunction withrepairs and the like. A carbon electrode is used to melt the material and, at the same time, a powerful jet of air blows away the molten material. The compressed air also cools the carbon electrode. Carbon electrodes can be used for the arc air gouging of unalloyed and low-alloy steel,stainless steel, cast iron and other metals. A complete set of arc air gouging equipment consists of a torch like the Flair 600 or Flair 1600,alternatively the K4000 with mono cable. OK Carbon, ESAB’s focused butcomprehensive range of arc air carbons enables the user to gouge in a widerange of applications, within foundries, steel industry, shipbuilding, steelconstruction and in maintenance workshops. The OK Carbon range givesthe user the highest possible efficiency by removal of metal per unit length or unit time.

DC Pointed, 4 x 305mm Pk 100 0700 007 002DC Pointed, 5 x 305mm Pk 100 0700 007 003DC Pointed, 6,35 x 305mm Pk 200 0700 007 004DC Pointed, 8 x 305mm Pk 200 0700 007 006DC Pointed, 10 x 305mm Pk 100 0700 007 007

DC Pointed, 6,35 x 510mm Pk 200 0700 007 104DC Pointed, 8 x 510mm Pk 150 0700 007 106DC Pointed, 10 x 510mm Pk 50 0700 007 107DC Pointed, 13 x 455mm Pk 50 0700 007 108

DC Jointed, 10 x 455mm Pk 100 0700 007 402DC Jointed, 13 x 455mm Pk 50 0700 007 404DC Jointed, 16 x 455mm Pk 50 0700 007 405DC Jointed, 19 x 455mm Pk 25 0700 007 406

AC Jointed, 4 x 305mm Pk 100 0700 007 601AC Jointed, 5 x 305mm Pk 50 0700 007 602AC Jointed, 6,35 x 305mm Pk 50 0700 007 603AC Jointed, 8 x 305mm Pk 50 0700 007 604AC Jointed, 10 x 305mm Pk 50 0700 007 704

DC Rectangular, 4 x 15 x 305mm Pk 125 0114 800 112DC Rectangular, 4 x 20 x 305mm Pk 100 0114 800 113DC Rectangular, 5 x 15 x 305mm Pk 125 0700 007 502DC Rectangular, 5 x 20 x 305mm Pk 100 0700 007 503

OK CARBON

Page 200: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Gouging TorchesGouging Torches

88 89

SPARES FOR FLAIR 1600 Fig 12

1 Set of screws 0468 253 0012 Insulating Caps 0468 253 0023 Brass Lever 0468 253 0234 Injection Nozzle 0468 253 0246 Lever Insulation 0468 253 0067 Spring 0468 253 0278 Hinge Pin 0468 253 0089 Body 0468 253 025

10 Valve 0468 253 01015 & 18 Valve Seat 0468 253 009

11,12,14 Push Button + Link 0468 253 01413,16,17 Handle 0468 253 033

SPARES FOR FLAIR 1600 (Fig 12)

Arc air gouging with carbon electrodes and compressed air is the fastestand cheapest process for cutting/gouging material in conjunction withrepairs and the like. A carbon electrode is used to melt the material and, at the same time, a powerful jet of air blows away the molten material. The compressed air also cools the carbon electrode. Carbon electrodes can be used for the arc air gouging of unalloyed and low-alloy steel,stainless steel, cast iron and other metals. A complete set of arc air gouging equipment consists of a torch like the Flair 600 or Flair 1600,alternatively the K4000 with mono cable. OK Carbon, ESAB’s focused butcomprehensive range of arc air carbons enables the user to gouge in a widerange of applications, within foundries, steel industry, shipbuilding, steelconstruction and in maintenance workshops. The OK Carbon range givesthe user the highest possible efficiency by removal of metal per unit length or unit time.

DC Pointed, 4 x 305mm Pk 100 0700 007 002DC Pointed, 5 x 305mm Pk 100 0700 007 003DC Pointed, 6,35 x 305mm Pk 200 0700 007 004DC Pointed, 8 x 305mm Pk 200 0700 007 006DC Pointed, 10 x 305mm Pk 100 0700 007 007

DC Pointed, 6,35 x 510mm Pk 200 0700 007 104DC Pointed, 8 x 510mm Pk 150 0700 007 106DC Pointed, 10 x 510mm Pk 50 0700 007 107DC Pointed, 13 x 455mm Pk 50 0700 007 108

DC Jointed, 10 x 455mm Pk 100 0700 007 402DC Jointed, 13 x 455mm Pk 50 0700 007 404DC Jointed, 16 x 455mm Pk 50 0700 007 405DC Jointed, 19 x 455mm Pk 25 0700 007 406

AC Jointed, 4 x 305mm Pk 100 0700 007 601AC Jointed, 5 x 305mm Pk 50 0700 007 602AC Jointed, 6,35 x 305mm Pk 50 0700 007 603AC Jointed, 8 x 305mm Pk 50 0700 007 604AC Jointed, 10 x 305mm Pk 50 0700 007 704

DC Rectangular, 4 x 15 x 305mm Pk 125 0114 800 112DC Rectangular, 4 x 20 x 305mm Pk 100 0114 800 113DC Rectangular, 5 x 15 x 305mm Pk 125 0700 007 502DC Rectangular, 5 x 20 x 305mm Pk 100 0700 007 503

OK CARBON

Page 201: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Fume Extraction Units

The Carryvac 2 P150/P150 AST are two small, lightweight, portableextraction units designed to be carried to the working area. Connected to a welding torch or to an extraction nozzle, the Carryvac 2 units extract the fume directly at source. The polluted air is filtered and captured in ahygienically-packed filter. The Carryvac 2 is equipped with a filter indicator,which shows when the filter must be replaced. It is ideal for maintenancewelding, low and medium-duty cycle. The filter capacity is approximately200 kg of solid wire or twelve 15 kg spools. The Carryvac 2 P150 AST isequipped with an automatic start/stop function, which increases the servicelife of each filter and of the unit itself. The Carryvac 2 P150 can be mountedon ESAB’s standard welding machines using the supplied mounting kit.Please also see ESAB Centrovac extraction torch range.

Carryvac 2 P150 0700 003 883Carryvac 2 P150 AST 0700 003 884Motor 220 V 0468 455 021Hose 45mm, 1.6m 0154 352 015Hose 45mm, 3.5m 0154 352 008Hose 45mm, 5m 0154 352 006Hose 45mm, 15m 0154 352 002Main filter 0700 003 004Pre filter 0468 455 002PC-board including cables 0700 003 005Carbon brushes 0700 003 010Coarse separator complete 0468 455 014Suction nozzle TM-80, round 80mm 0700 100 080Suction nozzle TM-200, 200mm wide 0700 100 200Suction nozzle PM-300, 300mm wide 0700 100 300

CARRYVAC 2

90

Page 202: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

PPE and Welding AccessoriesPERSONAL PROTECTIONWELDING TOOLS AND ACCESSORIESSPECIAL PROCESS EQUIPMENT

With over 100 years of experience in virtually every type of welding andcutting application across all industries, ESAB has an unrivalled abilityto solve welding and cutting problems wherever in the world they mayoccur. ESAB also has one of the most comprehensive product rangesin the welding and cutting industry.

Automated Cutting Equipment

• Oxy-Fuel Gas Cutters

• Plasma Cutters

• Laser Cutters

• Water Jet Cutters

Welding Consumables

• Manual Metal Arc Electrodes

• MIG/MAG Wires

• Flux Cored Wires

• Metal Cored Wires

• TIG Rods

• Sub Arc Fluxes and Wires

• Strip Cladding

Welding Accessories

• Helmets and goggles

• Hearing protection

• Respiratory equipment and masks

• Clothing and gloves

• Welding screens

• Welding cable, connectors and lugs

• Electrode holders

• Anti spatter and chemicals sundries

• General tools

Standard Equipment

• Manual Metal Arc Welders

• Semi Automatic MIG/MAG Welders

• TIG Welders

• Pulsed Arc Welders

• Manual Plasma Cutters

• Submerged Arc Welders

• Orbital TIG Welders

• Engine Driven Welders

Automatic Equipment

• Column & Boom

• Positioners

• Roller Beds

• Beam Welding Systems

• Mechanised TIG

• Plasma Welders

• Welding Tractors

• Storage Tank Welders

• Strip Cladding Systems

• Joint Tracking Systems

• Integrated Engineering Systems

• Turnkey Installations

• Friction Stir Welders

The ESAB Product Portfolio includes:

Global solutions for local customers – everywhere.

Find out more on www.esab.com

PWX 426 03/06

ESA

B P

PE

and W

eld

ing A

ccesso

ries

Page 203: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

ESAB Eco-Arc Welding HelmetThe new design of Flip Up Passive

welding helmet

The new Eco-Arc is the latest design in flip up passive welding helmets. With a light weight Poly Propylene Shell, and outstanding facial protection, this helmet is suitable for all positional welding.

Available in six flip front options, the helmet also adopts the new Eco Head Gear, with 4 rake positions & 3 longitudinal adjustment positions.- For precise nose to shell adjustment

The helmet is supplied complete with outer protection lens, shade 11 mineral glass and the unique large internal protection lens.

1 Eco-Arc 60 X 110

1 Eco-Arc 90 X 110

1 Eco-Arc 51 X 108

1 Eco-Arc 83 X 108

1 Eco-Arc 98 X 75

1 Eco-Arc 55 X 110

0700 000 938

0700 000 939

0700 000 940

0700 000 941

0700 000 942

0700 000 949

Full Face Protection – Offering protection to the face, chin, throat, ears & head area, allowing for all position welding

Light Weight Poly Shell – With the shell weighing in at 205g this increases long-term comfort for the wearer, and reduces fatigue. The complete helmet weighs 334g, making it one of the lightest helmets on the market.

New Eco Head Gear – Made from a robust Nylon material, the head gear is very light & durable. The sweat band also adds added comfort to the wearer. There are 4 rake positions and 3 longitudinal adjustments, this allows for the perfect fit.

EN 116 S – Internal spatter lens

Features and Bennefits

Ordering Information

Page 204: Welding Gloves Welding GlovesWelding Clothing Offering complete proection to the welder The ESAB Black and Yellow coverall has been designed to give the welder maximum protection.

Product picture

Placed left or right

depending on angle

Quality accessories for the quality welderESAB offers a wide range of accessories. The complete range, along with product information, is available at our local web-sites, look at www.esab.com or contact your local ESAB dealer.

Unrivalled service and supportOur commitment and ability to deliver the expected service and support starts immediately after the order is confirmed. We endeavour to offer our customers an After Sales service, which is second to non. A strong and skilful service organisation is prepared to offer service and maintenance, calibration, validation and upgrading of equipment and software.

The service organisation will offer standardised solutions for the reconditioning or modification of existing products.

Spare and wear parts are manufactured according to ESAB’s quality plan. Exchange Printed Circuit Board (PCB), exchange modules and components are available for all our products in order to reduce downtime to an absolute minimum. ESAB is continuously upgrading authorised service partners for local service support. Customers who have their own service and maintenance personnel will always be offered a service-training package as part of a total ESAB offering. However, product and process training for end-users will form an additional part of the ESAB offering. Always ask your ESAB sales representative or distributor for a complete ESAB solution.

ESAB Sverige AB

Box 8004402 77 GÖTEBORGTel. 031 50 95 00Fax 031 50 92 22www.esab.se

2 Sweat Band

3 Inside Cover Lens Eco-Arc

4 Spatter Lens 60 x 110

4 Spatter Lens 90 x 110

4 Spatter Lens 51 x 108

4 Spatter Lens 83 x 108

4 Spatter Lens 98 x 75

4 Spatter Lens 55 x 110

5 Lens Retaining Clip 60 x 110

5 Lens Retaining Clip 90 x 110

5 Lens retaining Clip 51 x 108

5 Lens Retaining Clip 50 x 105

5 Lens Retaining Clip 98 x 75

5 Lens Retaining Clip 55 x 110

6 Welding Filter 60 x 110

6 Welding Filter 90 x 110

6 Welding Filter 51 x 108

6 Welding Filter 83 x 108

6 Welding Filter 98 x 75

6 Welding Filter 55 x 110

0700 000 244

0700 000 252

0160 307 001

0160 307 004

0160 307 002

0701 416 351

0000 915 097

0700 000 253

0700 000 255

0700 000 256

0700 000 257

0700 000 258

0700 000 259

0700 000 260

0160 292 003

0760 031 633

0760 031 603

0701 413 210

0000 915 060

0700 000 251

2

3

5

6

4

1Spare Parts