Welding 4/17/18

Competitors will only be allowed to use tools that are listed within the Technical Standards

2018. Any other tools used will result in a point’s deduction.

*The following lists are the welding power sources and filler metal that will be supplied.

1.) Lincoln Electric – Power Source (Aspect 375)

Lincoln Electric – Filler Metal

(3/32” - 1/8” 5P+)

(3/32” – 1/8” Excalibur 7018 MR)

(1/8” Jetweld)

(1/16” – 3/32” – 1/8” SuperGlaze 4043)

(1/16” – 3/32” – 1/8” SuperGlaze 5356)

2.) Miller Electric – Power Source (Millermatic 350p)

Miller Electric – Filler Metal

(.035 Quantum Arc 6 - ER70S-6)

(.045 FabCO Excel Arc 71 – E71T-1)

*WELDING/CUTTING PROJRCTS:

Each competitor will perform an Oxy-fuel cutting project.

Each competitor will perform an FCAW project, GMAW project, SMAW project, and GTAW

project.

The following PDF 3D models illustrate the possible FCAW/GMAW/SMAW, and GTAW

projects. The project position and weld symbols will be determined in Louisville.

UNLESS OTHERWISESPECIFIED

DIMENSIONS ARE IN INCHES

TITLE

SIZEA

UNLESS OTHERWISESPECIFIED

DIMENSIONS ARE IN INCHES

TITLE

SIZEA

UNLESS OTHERWISESPECIFIED

DIMENSIONS ARE IN INCHES

TITLE

SIZEA

UNLESS OTHERWISESPECIFIED

DIMENSIONS ARE IN INCHES

TITLE

SIZEA