Welcome to 2012 BRO Forum Pulverizer Breakout

8
Mike Leadmon Ed Dillow 8/7/12

description

Welcome to 2012 BRO Forum Pulverizer Breakout. Mike Leadmon Ed Dillow 8/7/12. Safety Topic & House keeping. Circular letter ST-O-CL- 005 “Pulverizer and Burner line Fire Operating procedures” – Highly recommend reading to learn about combustibles and coal/air explosive ratios. - PowerPoint PPT Presentation

Transcript of Welcome to 2012 BRO Forum Pulverizer Breakout

Page 1: Welcome to 2012 BRO Forum Pulverizer Breakout

Mike LeadmonEd Dillow

8/7/12

Page 2: Welcome to 2012 BRO Forum Pulverizer Breakout

• Circular letter ST-O-CL-005 “Pulverizer and Burner line Fire Operating procedures” – Highly recommend reading to learn about combustibles and coal/air explosive ratios.

• Technique of “putting out coal fires on unit”.

Page 3: Welcome to 2012 BRO Forum Pulverizer Breakout

• Emergencies dial “Help” (4357) instead of 911 on “in house phones”.

• In case of fire – alarm will sound, listen for instructions, and evacuate.

• Weather and power outages – facility will instruct what to do.

• Break will be from 2:15 to 2:45, will attempt to end promptly at 400pm, but will remain in room for questions after this if desired.

Page 4: Welcome to 2012 BRO Forum Pulverizer Breakout

Alstom/Duke - will discuss the actual data from upgrades at Miami Fort and Zimmer and their process for resolving pulverizer fires and the approach to the pulverizer program in general.

Big Sandy / Loesche – will discuss the progress and challenges of installing a rotating classifier.

Page 5: Welcome to 2012 BRO Forum Pulverizer Breakout

• Don’t expect to do this in one weekend.

• Amos and Mitchell both have done this, and it takes longer than you think.

• Make sure you compare to “old” data, you might be surprised.

Page 6: Welcome to 2012 BRO Forum Pulverizer Breakout

• Averaging Pitot tube, works well, spread the word. John Weinsheimer will tell us about the tool.

• SAS triple race throats, installed at Rockport , Welsh , and Flint Creek. Test data and effects on grinding zone erosion forthcoming.

• Big Sandy will give an update on the Loesche rotating classifier installation scheduled for this fall.

Page 7: Welcome to 2012 BRO Forum Pulverizer Breakout

• News on table cracking? The B&W report confirms the failure mechanism to be fatigue. The bolt holes compound the problem, so weld throats on. Do good inspections and get them in your budgets. B&W will discuss inspection and repair procedures during their presentation.

• What PDM methods are effective in determining MPS gearbox health? B&W will discuss during their presentation, effective means of monitoring gearbox conditions.

Page 8: Welcome to 2012 BRO Forum Pulverizer Breakout

Smart Burn will discuss modeling of the MPS mill and how they predict changes in boiler slagging, based on coal properties or blends.