Weinman...Weinman - Split Case DATE Page(s) Change / Correction 12/01/16 All Price Increase 12/16/16...
Transcript of Weinman...Weinman - Split Case DATE Page(s) Change / Correction 12/01/16 All Price Increase 12/16/16...
-
All Terms & Conditions are subject to Crane Pumps & Systems Terms & Conditions.
Please visit www.cranepumps.com for comprehensive details of our Terms & Conditions.
IMPORTANT NOTE: Please consult the catalog for important warnings, specifications
and other vital information for the product(s) in which you are interested.
Prices Subject to Change Without Notice.
All prices in U.S. Dollars, F.O.B. Piqua, Ohio.
WeinmanSplit-Case Series
1200 - 1100 - 1310 - 1210 NSF 61/372
January 1, 2020
CONFIDENTIAL PRICE LIST
1/1/20Split Case
Page 1
-
Weinman - Split Case
DATE Page(s) Change / Correction
12/01/16 All Price Increase
12/16/16 4 Correction of description on case wear ring
01/18/17 11, 15 Corrected mechanical seal pressure values
03/30/17 Materials of Construction pages Corrected the flange descriptions
09/29/17 20-27 NSF 61 / 372 Weinman price pages added
11/02/17 2 Added note to Weinman NSF61/372 page
11/03/17 23, 24 Changed heading to read Rotating Assemblies
11/09/17 25, 26 Price corrections on these two pages to match pg 9 & 10
11/17/17 5-8 Non-NSF changes
12/22/17 5-8 and 21-24 NSF changes
05/07/18 Vertical series 1100 Bases Corrected motor frame sizes
07/23/18 All Price Increase
08/29/18 8 & 12 Adjusted the Kynar separator price
01/01/19 All Price Increase
05/16/19 6 & 8 Adjusted Bronze Sleeve Pricing
01/01/20 All Price Increase
1/1/20Split Case
Page 2
-
Weinman - Split-Case Pumps
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
SECTION PAGE
1200 Weinman Single Stage Horizontal Split Case Pumps
Materials of Construction 4
Non-NSF Pump Prices 5 - 6
Non-NSF Rotating Assembly Prices 7 - 8
Base Assembly Prices 9
Drip Pan Adder Prices 10
Mechanical Seal Adder Prices 11
1100 Weinman Single Stage Vertical Split Case Pumps
Materials of Construction 12
Vertically Mounted Pump Prices 13
Vertical Style Base Assembly Prices 14
Mechanical Seal Adder Prices 15
For NSF61/372 Weinman Single Stage LVM Series Vertical Split Case Pumps,
consult factory for pricing
1310 Weinman 2-Stage Horizontal Split Case Pumps
Materials of Construction 16
2 Stage Pump and Pump/Base Prices 17
Rotating Assembly Prices 18
Mechanical Seal Adder Prices 19
1210 Weinman Single Stage Horizontal Split Case Pumps with NSF372/61 Certification**
NSF 61 / 372 Materials of Construction 20
NSF 61 / 372 Pump Prices 21-22
NSF 61 / 372 Rotating Assembly Prices 23-24
Base Assembly Prices 25
Drip Pan Adder Prices 26
NSF 61 / 372 Mechanical Seal Adder Prices 27
** Price of NSF certified Weinman split case only; NOT Deming pumps
DESCRIPTION
1/1/20Split Case
Page 3
-
Weinman 1200 L SeriesHorizontal Single Stage Split Case
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
Standard Materials of Construction
Casing Cast iron
Impeller ASB - Aluminum-Silicon-Brass
Case wear ring Bronze
Shaft 416SS on sleeveless design, 4140 Steel on L7 & L8
Shaft Sleeve Bronze (Standard on L7 & L8) Optional on L1 ~ L6
Mechanical seal Single Type 1, Buna/Carbon/Ceramic
Seal Gland Cast iron
Maximum Working Pressures
Models
Flanges 150 Lb FF 300 Lb FF
Case material Cast Iron Ductile Iron
Max Temp 100°F 250°F 100°F 250°F 100°F 100°F
Max Working Pressure 175 psig 150 psig 450 psig 400 psig 150 psig ** 250 psig
150 Lb ASA Flanges have same drilling as 150 Lb FF steel flanges
300 Lb ASA Flanges have same drilling as 300 Lb FF steel flanges
Working pressures are non-shock service
** Cast iron 6L7 and 8L8 have 250 lb. Flat Face Discharge Flange and Casing designed for 215 PSIG
maximum working pressure.
L7 & L8
150 Lb Flat Face 300 Lb Flat Face
Cast Iron Ductile Iron
L1 ~ L6
www.cranepumps.com
1/1/20Split Case
Page 4
-
Weinman 1200 L Series
Horizontal Single Stage Split Case
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.Prices subject to change without notice.
Single Stage, Bronze Fitted with a 416SS shaft (sleeveless design) - LH rotation is available at no extra cost
Standard seals are Buna/Carbon/Ceramic (Y2)
Please specify pump rotation and impeller trim when placing an order
List Adders
Impeller RingsSleeved Shaft Sleeves 300# Flange
Model SizeCurve
NumberRPM
List price
of
standard
pump
Bronze
Impeller Wear
Rings (qty 2)
Steel
shaft
(sleeved
design) §
416SS
shaft
(sleeved
design)
Bronze
sleeve
(qty 2) ***
416SS
sleeve
(qty 2)
Ductile Iron
flanges -
requires use
of a
balanced
seal
2L4A 2X3X10A2L4-182
2L4-362
1750
3500270 $4,230 $264 $971 $2,104 $513 $636 $624
2L4B** 2X3X10B2L4-182
2L4-362
1750
3500270 $4,230 $264 $971 $2,104 $513 $636 $624
2L5 2X3X142L5-122
2L5-183
1150
1750310 $5,659 $264 $971 $2,104 $513 $636 $1,696
2L6 2X3X12 2L6-182 1750 290 $4,324 $264 $971 $2,104 $513 $636 $1,137
3L4 3X4X103L4-181
3L4-361
1750
3500380 $4,800 $289 $971 $2,215 $610 $636 $1,040
3L5 3X4X143L5-121
3L5-182
1150
1750450 $5,621 $289 $971 $2,215 $610 $636 $2,154
3L6 3X4X12 3L6-182 1750 390 $4,792 $289 $971 $2,215 $513 $636 $1,875
4L1A 4X5X14A4L1-122
4L1-184
1150
1750530 $6,429 $446 $971 $2,294 $610 $638 $2,205
4L1B 4X5X14B 4L1-182 1750 530 $6,429 $446 $971 $2,294 $610 $638 $2,205
4L1C** 4X5X14C 4L1-182 1750 530 $6,429 $446 $971 $2,294 $610 $638 $2,205
4L2 4X5X11 4L2-182 1750 375 $5,428 $446 $971 $2,294 $513 $638 $1,910
4L3 4X5X8 4L3-182 1750 330 $5,247 $446 $971 $2,294 $513 $638 $2,010
4L4 4X6X104L4-181
4L4-361
1750
3500485 $5,843 $499 $971 $2,294 $727 $638 $2,082
5L1 5X6X155L1-121
5L1-181
1150
1750710 $7,587 $499 $971 $2,579 $727 $638 $2,248
5L2 5X6X12 5L2-184 1750 520 $6,305 $499 $971 $2,579 $610 $638 $1,975
5L3 5X6X9 5L3-182 1750 420 $5,114 $499 $971 $2,579 $513 $638 $2,151
6L1 6X8X16A6L1-122
6L1-182
1150
17501020 $8,733 $554 $1,040 $2,641 $804 $1,060 $2,522
6L2 6X8X126L2-121
6L2-182
1150
1750615 $7,573 $554 $1,040 $2,641 $727 $1,060 $2,273
6L3 6X8X96L3-121
6L3-182
1150
1750520 $6,016 $554 $1,040 $2,641 $610 $1,060 $2,580
6L7* 6x8x20 PC3644 1750 840 $12,350 $554 std $2,641 std $1,060 $2,999
* Shaft sleeve design, all others are standard sleeveless
** Models numbers are for replacement pump reference - do not use this reference for new pumps
*** Bronze sleeves standard with balanced seal options
Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case
RTF = Refer to factory | STD = standard | N/A = not available
For Oil Lube Bearings, Refer to Factory.
§ Steel shaft always requires bronze or 416SS sleeves and not available in balanced designs. Sleeves have to be chosen separately from
above table.
www.cranepumps.com
1/1/20Split Case
Page 5
-
Weinman 1200 L Series
Horizontal Single Stage Split Case
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.Prices subject to change without notice.
Single Stage, Bronze Fitted with a 416SS shaft (sleeveless design) - LH rotation is available at no extra cost
Standard seals are Buna/Carbon/Ceramic (Y2)
Please specify pump rotation and impeller trim when placing an order
List Adders
Impeller
RingsSleeved Shaft Sleeves 300# Flange
Model SizeCurve
NumberRPM Weight
List price
of
standard
pump
Bronze
Impeller
Wear Rings
(qty 2)
Steel
shaft
(sleeved
design) §
416SS
shaft
(sleeved
design)
Bronze
sleeve
(qty 2) ***
416SS
sleeve
(qty 2)
Ductile Iron
flanges -
requires
use of a
balanced
seal
8L1 8X10X16
8L1-121
8L1-151
8L1-181
1150
1450
1750
1550 $13,254 std $1,216 $2,731 $804 $1,637 $3,783
8L2A 8X10X128L2-121
8L2-181
1150
1750 1030$10,235 std $1,216 $2,731 $804 $1,637 $3,257
8L2B 8X10X13
8L2-122
8L2-152
8L2-182
1150
1450
1750
1030 $10,235 std $1,216 $2,731 $804 $1,637 $3,257
8L3 8X10X108L3-122
8L3-182
1150
1750 875$10,272 std $1,216 $2,731 $727 $1,637 $2,469
8L7* 8X10X17 PC3658 1750 965 $12,640 std std $2,731 std $1,637 $2,972
8L8* 8X10X20 PC3661 1750 1100 $15,310 std std $2,731 std $1,637 $4,328
10L2A 10X12X1410L2A-122
10L2A-182
1150
17502000 $15,366 std $1,461 $3,118 $1,109 $1,725 $3,818
10L3A 10X12X12 10L3-182 1750 1470 $13,619 std $1,461 $3,118 $804 $1,725 $3,455
10L3B 10X12X11B 10L3-121 1150 1470 $13,619 std $1,461 $3,118 $804 $1,725 $4,632
10L7* 10X12X14.5 PC3669 1750 1275 $14,338 std std $3,118 std $1,725 $5,169
10L8* 10X12X17 PC3673 1750 1375 $16,599 std std $3,118 std $1,725 $5,169
12L2A 12X12X14A12L2-123
12L2-183A
1150
17501800 $15,549 std $1,498 $3,187 $1,818 $2,456 $5,969
12L2B 12X12X14
12L2-124
12L2-151
12L2-184
1150
1450
1750
1800 $15,549 std $1,498 $3,187 $1,818 $2,456 $5,969
12L2C 12X12X15** 12L2-184A 1750 1800 $16,297 std n/a n/a n/a n/a $7,075
* Shaft sleeve design, all others are standard sleeveless
**Heavy Duty Shaft over 13.50" diameter
*** Bronze sleeves standard with balanced seal options
Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case
RTF = Refer to factory | STD = standard | N/A = not available
For Oil Lube Bearings, Refer to Factory.
§ Steel shaft always requires bronze or 416SS sleeves and not available in balanced designs. Sleeves have to be chosen separately from
above table.
www.cranepumps.com
1/1/20Split Case
Page 6
-
Weinman 1200 L Series Rotating Assemblies
CONFIDENTIAL STANDARD PUMP MULTIPLIER APPLIESAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
Single Stage, Bronze Fitted with a 416SS shaft (sleeveless design) - LH rotation is available at no extra cost
Rotating assemblies consist of all internal components, fully assembled at the factory - please specify impeller trim
and pump rotation when placing an order
List Adders
Impeller
RingsSleeved Shaft Sleeves
Model SizeCurve
NumberRPM
List price of
standard
rotating
assembly
Bronze
Impeller Wear
Rings (qty 2)
Steel
shaft
(sleeved
design) §
416SS
shaft
(sleeved
design)
Bronze
sleeve
(qty 2) ***
416SS
sleeve
(qty 2)
2L4A 2X3X10A2L4-182
2L4-362
1750
3500270 $3,693 $264 $971 $2,104 $513 $636
2L4B 2X3X10B2L4-182
2L4-362
1750
3500270 $3,693 $264 $971 $2,104 $513 $636
2L5 2X3X142L5-122
2L5-183
1150
1750310 $4,362 $264 $971 $2,104 $513 $636
2L6 2X3X12 2L6-182 1750 290 $3,666 $264 $971 $2,104 $513 $636
3L4 3X4X103L4-181
3L4-361
1750
3500380 $3,747 $289 $971 $2,215 $610 $636
3L5 3X4X143L5-121
3L5-182
1150
1750450 $4,386 $289 $971 $2,215 $610 $636
3L6 3X4X12 3L6-182 1750 390 $3,505 $289 $971 $2,215 $513 $636
4L1A 4X5X14A4L1-122
4L1-184
1150
1750530 $4,337 $446 $971 $2,294 $610 $638
4L1B 4X5X14B 4L1-182 1750 530 $4,232 $446 $971 $2,294 $610 $638
4L1C 4X5X14C 4L1-182 1750 530 $4,094 $446 $971 $2,294 $610 $638
4L2 4X5X11 4L2-182 1750 375 $4,232 $446 $971 $2,294 $513 $638
4L3 4X5X8 4L3-182 1750 330 $4,094 $446 $971 $2,294 $513 $638
4L4 4X6X104L4-181
4L4-361
1750
3500485 $4,560 $499 $971 $2,294 $727 $638
5L1 5X6X155L1-121
5L1-181
1150
1750710 $5,919 $499 $971 $2,579 $727 $638
5L2 5X6X12 5L2-184 1750 520 $4,918 $499 $971 $2,579 $610 $638
5L3 5X6X9 5L3-182 1750 420 $3,987 $499 $971 $2,579 $513 $638
6L1 6X8X16A6L1-122
6L1-182
1150
17501020 $6,812 $554 $1,040 $2,641 $804 $1,060
6L2 6X8X126L2-121
6L2-182
1150
1750615 $5,907 $554 $1,040 $2,641 $727 $1,060
6L3 6X8X96L3-121
6L3-182
1150
1750520 $4,695 $554 $1,040 $2,641 $610 $1,060
6L7* 6x8x20 PC3644 1750 840 $10,814 $554 std $2,641 std $1,060
* Shaft sleeve design, all others are standard sleeveless
*** Bronze sleeves standard with balanced seal options
RTF = Refer to factory | STD = standard | N/A = not available
§ Steel shaft always requires bronze or 416SS sleeves and not available in balanced designs. Sleeves have to be chosen
separately from above table.
www.cranepumps.com
1/1/20Split Case
Page 7
-
Weinman 1200 L SeriesRotating Assemblies
CONFIDENTIAL STANDARD PUMP MULTIPLIER APPLIESAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
Single Stage, Bronze Fitted with a 416SS shaft (sleeveless design) - LH rotation is available at no extra cost
Rotating assemblies consist of all internal components, fully assembled at the factory - please specify impeller trim
and pump rotation when placing an order
List Adders
Impeller
RingsSleeved Shaft Sleeves
Model SizeCurve
NumberRPM
List price of
standard
rotating
assembly
Bronze
Impeller
Wear Rings
(qty 2)
Steel shaft
(sleeved
design) §
416SS
shaft
(sleeved
design)
Bronze
sleeve
(qty 2)
***
416SS
sleeve
(qty 2)
8L1 8X10X16
8L1-121
8L1-151
8L1-181
1150
1450
1750
1550 $10,339 std $1,216 $2,731 $804 $1,637
8L2A 8X10X128L2-121
8L2-181
1150
1750 1030$7,986 std $1,216 $2,731 $804 $1,637
8L2B 8X10X13
8L2-122
8L2-152
8L2-182
1150
1450
1750
1030 $7,986 std $1,216 $2,731 $804 $1,637
8L3 8X10X108L3-122
8L3-182
1150
1750 875$8,011 std $1,216 $2,731 $727 $1,637
8L7* 8X10X17 PC3658 1750 965 $9,858 std std $2,731 std $1,637
8L8* 8X10X20 PC3661 1750 1100 $11,942 std std $2,731 std $1,637
10L2A 10X12X1410L2A-122
10L2A-182
1150
17502000 $11,985 std $1,461 $3,118 $1,109 $1,725
10L3A 10X12X12 10L3-182 1750 1470 $10,971 std $1,461 $3,118 $804 $1,725
10L3B 10X12X11B 10L3-121 1150 1470 $10,971 std $1,461 $3,118 $804 $1,725
10L7* 10X12X14.5 PC3669 1750 1275 $11,185 std std $3,118 std $1,725
10L8* 10X12X17 PC3673 1750 1375 $12,944 std std $3,118 std $1,725
12L2A 12X12X14A12L2-123
12L2-183A
1150
17501800 $12,410 std $1,498 $3,187 $1,818 $2,456
12L2B 12X12X14
12L2-124
12L2-151
12L2-184
1150
1450
1750
1800 $12,410 std $1,498 $3,187 $1,818 $2,456
12L2C 12X12X15** 12L2-184A 1750 1800 $12,711 std n/a n/a n/a n/a
* Shaft sleeve design, all others are sleeveless
**Heavy duty shaft over 13.50" diameter
*** Bronze sleeves standard with balanced seal options
RTF = Refer to factory | STD = standard | N/A = not available
§ Steel shaft always requires bronze or 416SS sleeves and not available in balanced designs. Sleeves have to be chosen
separately from above table.
www.cranepumps.com
1/1/20Split Case
Page 8
-
Weinman 1200 L SeriesBase Assemblies & Special Couplings
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
Weight List Weight List Weight List Weight List Weight List Weight List
(lb) Price (lb) Price (lb) Price (lb) Price (lb) Price (lb) Price
3/4 1-1/2 143T
1 1-1/2 - 2 2 - 3 145T
1-1/2 3 5 182T $1,173 170 $1,207 190 $1,329
5 7-1/2 184T
3 7-1/2 10 213T
5 10 15 215T
7-1/2 15 20 254T
10 20 25 256T
284T
15 15 30 284TS 200 $1,427 210 $1,470 220 $1,573 340 $1,939 350 $2,190 400 $2,272
20 30 40 286T
286TS
324T
25 40 50 324TS 230 $1,544 230 $1,524 240 $1,690 360 $2,055 370 $2,306 420 $2,320
30 50 60 326T
326TS
364T
40 60 75 364TS 240 $1,677 250 $1,796 370 $2,187 380 $2,446 430 $2,453
50 75 365T
365TS
404T
60 100 404TS 270 $2,432 400 $2,594 410 $3,144 460 $3,126
75 125 405T
405TS
100 150 444T
125 200 445T 460 $2,833 470 $3,508 520 $3,514
150 250…300 447T
200 449T
Metal Flex Metal Flex Metal Flex Metal Flex Metal Flex Metal Flex
Grid Spacer Grid Spacer Grid Spacer Grid Spacer Grid Spacer Grid Spacer
3/4 1-1/2 143T
1 1-1/2 - 2 2 - 3 145T
1-1/2 3 5 182T $215 $260 $215 $260 $215 $260
2 5 7-1/2 184T
3 7-1/2 10 213T
5 10 15 215T
7-1/2 15 20 254T
10 20 25 256T
284T
15 25 30 284TS $248 $411 $248 $411 $248 $411 $248 $411
20 30 40 286T
286TS
324T
25 40 50 324TS $284 $507 $284 $507 $284 $507 $284 $507 $284 $507 $284 $507
30 50 60 326T
326TS
364T
40 60 75 364TS $405 $679 $405 $679 $405 $679 $405 $679 $405 $679
50 75 365T
365TS
404T
60 100 404TS $518 $1,069 $518 $1,069 $518 $1,069 $518 $1,069
75 125 405T
405TS
100 150 444T
125 200 445T $722 $1,089 $722 $1,089 $722 $1,089
150 250…300 447T
200 449T
OSHA standards are vague and differ from each state. The Term OSHA defines a generic type and not a specific standard.
Base Plate Drip Pan Options are available on the following pageSee the next page for the Hytrel Coupling Statement
Steel Centerdrain Base, Flexible Coupling
and OSHA Guard, No Motor
4L2, 4L3, 5L3
1750
RPM
3550
RPM
Motor
Frame
Motor
Frame
$1,228
1150
RPM
1150
RPM
1750
RPM
3550
RPM
Special Coupling Adders - List Price
12L2-15
3L4, 3L5
4L1
5L2
8L1
12L2
8L2
10L2
4L4
6L2
8L1
10L3 10L8
6L1
2L4, 2L5
2L6, 3L6
4L2, 4L3
3L4, 3L5
200
6L1 6L7, 8L7
8L8
10L7
6L7, 8L7
5L1
210
4L4
$1,431
8L3
2L4, 2L5
5L3
180
6L3
$1,267
8L88L2
5L2, 6L3 6L2, 8L3
12L2
12L2-1510L7, 10L810L2, 10L3
5L1
$215 $288
2L6, 3L6
$215 $288
4L1
$215 $288
www.cranepumps.com
1/1/20Split Case
Page 9
-
Weinman 1200 L SeriesBase Assembly Drip Pan Adder
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
Note - Drip pan base dimensions are different than the published base dimensions
Please consult the factory if a dimensional drawing is required
Motor Drip Pan
Frame
56 $587
143T-145T $587
182T-184T $587
213T-215T $587
254T-256T $652
284T-286T $652
324TS-326T $652
364TS-365T $652
404TS-405T $751
444TS-445T $751
Weinman base and frame mounted pumps with motors of frame size 365 or larger
use Hytrel sleeves in the couplings. Hytrel sleeves are not suitable for variable
speed systems and must be replaced with an all metal coupling, because of space
and torque requirements.
www.cranepumps.com
1/1/20Split Case
Page 10
-
Weinman 1200 L Series
Mechanical Seal Options
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
Mechanical seals supplied on pumps in section 1200 are non-pusher type elastomer bellows seals -
Type 1 or equivalent, code B/C/CE (Y2). These materials are recommended for water temperatures
up to 180°F and pressures to 150 psi. Dissolved solids limited to 250 PPM.
Unbalanced seals (carbon/ceramic & carbon/ni-resist) should be limited to 150 psi suction pressure to insure
optimum seal life.
Mechani Pump Models1 2 3 4 5 6 7 8
2L4, 2L5 3L4 6L1 12L2C 6L7
2L6, 3L6 3L5 5L1 8L2 10L2A 8L1 8L7
4L2, 4L3 4L1 6L2 10L2 12L2 8L8
5L3 5L2, 6L3 8L3 10L3 10L7, 10L8
Weinman List List List List List List List List
Code Adder Adder Adder Adder Adder Adder Adder Adder
Water to 180°F, 150 psi
B/C/CE
Water to 180°F, 150 psi
B/C/NR
Water to 300°F, 200 psi
EP/C/SC
Water to 300°F, 200 psi
EP/SC/SC
Water to 250°F, 200 psi
V/C/SC
Water to 250°F, 200 psi
V/SC/SC
Water to 180°F, 250 psi Use Un Bal Use Un Bal
B/C/CE Y58 or Y60 Y58 or Y60
Water to 300°F, 450 psi Use Un Bal Use Un Bal
EP/C/SC Y58 or Y60 Y58 or Y60
Water to 300°F, 450 psi Use Un Bal Use Un Bal
EP/SC/SC Y58 or Y60 Y58 or Y60
Water to 250°F, 450 psi Use Un Bal Use Un Bal
V/C/SC Y58 or Y60 Y58 or Y60
Water to 250°F, 450 psi Use Un Bal Use Un Bal
V/SC/SC Y58 or Y60 Y58 or Y60
$1,328
Elastomer
B = Buna-N
V = Viton
EP = EPDM/EPR
18-8 Stainless SteelNR = Ni-Resist
CE = Ceramic
Explanations of Seal Codes - Example B/C/CE
Rotating Face Stationary Face Spring & Retainer
$6,886$3,833
$3,833
$3,397
SC = Silicon Carbide
C = Carbon
Kynar Separator
PN AS-DK12K-KIT
$1,531 $1,793 $4,470
$2,376 $2,696 $3,397
$1,793
$3,503
$4,595
$3,833
$3,596
$3,628$3,559$3,379
$2,920$2,197$2,101
$2,320
$1,592
$2,528
$2,920
$3,212
$3,274
$3,233
$3,557
$3,551
$1,964 $2,312 $2,437
$2,752
Type 1B: Balanced Seals (Includes Bronze Sleeves) - Required with the use of a Ductile iron case
Y62
$3,156 $3,325 $4,392 $4,595Y52
$1,092 $1,231
$5,312
$3,379 $3,559 $3,628 $3,833 $5,551
$3,144 $3,323 $3,393 $3,597 $6,650
Y2
Y58
Y60
Std
$3,010
$1,894
$1,787
$3,201$2,943 $3,761
Std
$3,311
$1,722
$2,040
Type 1: Unbalanced Seals
Service
Y34
Y2
Y58
Y60
Y52
Y62
Std
$204 $1,938$1,938 $1,592$1,070$497$234
$3,274$3,365
$3,212
StdStd StdStdStd
www.cranepumps.com
1/1/20Split Case
Page 11
-
Weinman 1100 LVM Series
Vertical Single Stage Split Case
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
Standard Materials of Construction
Casing Cast iron
Impeller ASB - Aluminum-Silicon-Brass
Case wear ring Bronze
Shaft 416SS on sleeveless design, 4140 Steel on L7 & L8
Shaft Sleeve Bronze (Standard on L7 & L8) Optional on L1 ~ L6
Mechanical seal Single Type 1, Buna/Carbon/Ceramic
Seal Gland Cast iron
Maximum Working Pressures
Models
Flanges 150 Lb FF 300 Lb FF
Case material Cast Iron Ductile Iron
Max Temp 100°F 250°F 100°F 250°F 100°F 100°F
Max Working Pressure 175 psig 150 psig 450 psig 400 psig 150 psig ** 250 psig
150 Lb ASA Flanges have same drilling as 150 Lb FF steel flanges
300 Lb ASA Flanges have same drilling as 300 Lb FF steel flanges
Working pressures are non-shock service
** Cast iron 6L7 and 8L8 have 250 lb. Flat Face Discharge Flange and Casing designed for 215 PSIG
maximum working pressure.
L1 ~ L6 L7 & L8
150 Lb Flat Face 300 Lb Flat Face
Cast Iron Ductile Iron
www.cranepumps.com
1/1/20Split Case
Page 12
-
Weinman 1100 LVM Series
Vertical Single Stage Split Case
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
Single Stage, Double Suction, Split Case Pumps for Vertical Mounting
with B/C/CE Y2 Mechanical Seals, Bronze Fitted
Table No 1 - Pump Only - No Base or Coupling (Must Add Price for Base, Coupling and Guard) Model Size DI Flanges Bronze Brz sleeves 416SS sleeves 416SS
Basic Pump 300#/Requires Impeller (Std with un- Shaft (std w
Weight Std. Fitted Wear Ring balanced sleeveless
(lb) List Price balanced seal List Adder seal option) design)
2LVM4 2x3x10 270 $6,345 $624 $264 $610 $667 $2,208
2LVM5 2x3x14 310 $8,070 $1,696 $264 $610 $667 $2,208
2LVM6 2x3x12 290 $6,455 $1,137 $264 $610 $667 $2,208
3LVM4 3x4x10 380 $7,035 $1,040 $289 $610 $667 $2,325
3LVM5 3x4x14 450 $8,024 $2,154 $289 $610 $667 $2,325
3LVM6 3x4x12 390 $7,022 $1,875 $289 $610 $667 $2,325
4LVM1 4x5x14 530 $8,999 $2,205 $446 $610 $670 $2,408
4LVM2 4x5x11 375 $7,789 $1,875 $446 $610 $670 $2,408
4LVM3 4x5x8 330 $7,574 RTF $499 $610 $670 $2,408
4LVM4 4x6x10 485 $8,293 RTF $499 $610 $670 $2,408
5LVM1 5x6x15 710 $10,400 $2,248 $499 $610 $670 $2,708
5LVM2 5x6x12 520 $8,849 $1,975 $499 $610 $670 $2,708
5LVM3 5x6x9 420 $7,413 RTF $499 $610 $670 $2,708
6LVM1 6x8x16 1020 $11,785 $2,522 $554 $610 $1,112 $2,773
6LVM2 6x8x12 615 $10,378 $2,273 $554 $610 $1,112 $2,773
6LVM3 6x8x9 520 $8,502 RTF $554 $610 $1,112 $2,773
6LVM7* 6x8x20 840 $16,152 $2,999 $554 std $1,112 $2,773
8LVM1 8x10x16 1550 $17,243 $3,783 std $1,818 $1,718 $2,866
8LVM2 8x10x13 1030 $13,599 $3,257 std $804 $1,718 $2,866
8LVM3 8x10x10 875 $13,643 $2,469 std $804 $1,718 $2,866
8LVM7* 8x10x17 965 $16,503 $2,972 std std $1,718 $2,866
8LVM8* 8x10x20 1100 $19,731 $4,328 std std $1,718 $2,866
10LVM2 10x12x14 2000 $19,794 $3,818 std $1,109 $1,813 $3,274
10LVM3 10x12x12 1470 $17,686 $3,455 std $804 $1,813 $3,274
10LVM7* 10x12x14 1275 $18,552 $5,169 std std $1,813 $3,274
10LVM8* 10x12x17 1375 $21,283 $5,169 std std $1,813 $3,274
12LVM2 12x12x14 1800 $20,016 $7,075 std $1,818 $2,578 $3,346
12LVM2-15 12x12x15 1800 $20,917 $7,075 N/A N/A N/A N/A
RTF = Refer to Factory * Shaft Sleeve Design
Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case
www.cranepumps.com
1/1/20Split Case
Page 13
-
Vertical Split Case Pump Base Assemblies
Fabricated Vertical Base and Guard, No Motor
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio. Short shaft motors must be used with 3600 rpm applications, 284TSC frame and larger
Prices subject to change without notice.
Motor
1150 1750 3550 Frame Weight List Weight List Weight List Weight List Weight List Weight List
RPM RPM RPM (lb) Price (lb) Price (lb) Price (lb) Price (lb) Price (lb) Price
3/4 11/2 143TCV
1 11/2 - 2 2 - 3 145TCV
11/2 3 5 182TCV 255 $3,075 255 $3,075 255 $3,075
2 5 71/2 184TCV
3 71/2 10 213TCV
5 10 15 215TCV
71/2 15 20 254TCV
10 20 25 256TCV
284TCV
15 25 30 284TSCV 300 $4,533 300 $4,533 310 $4,219 510 $6,145 525 $6,145 600 $8,563
20 30 40 286TCV
286TSCV
324TCV
25 40 50 324TSCV 320 $4,533 320 $4,533 335 $5,033 520 $6,232 540 $6,232 610 $8,741
30 50 60 326TCV
326TSCV
364TCV
40 60 75 364TSCV 350 $4,859 370 $5,033 540 $6,463 570 $6,463 615 $8,926
50 75 365TCV
365TSCV
60 100 404TSCV 400 $5,513 600 $6,677 605 $6,677 630 $9,248
75 125 405TSCV
100 150 444TSCV
125 200 445TSCV 630 $6,988 645 $6,988 780 $9,670
150 250…300 447TSCV
200 449TSCV
Metal Flex Metal Flex Metal Flex Metal Flex Metal Flex Metal Flex
Motor Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer Spacer
1150 1750 3550 Frame List List List List List List List List List List List List
RPM RPM RPM Adder Adder Adder Adder Adder Adder Adder Adder Adder Adder Adder Adder
3/4 11/2 143TCV
1 1 1/2 - 2 2 - 3 145TCV
11/2 3 5 182TCV $534 $322 $534 $322 $534 $322
2 5 71/2 184TCV
3 71/2 10 213TCV
5 10 15 215TCV
71/2 15 20 254TCV
10 20 25 256TCV
284TCV
15 25 30 284TSCV $623 $507 $623 $507 $623 $507 $623 $507
20 30 40 286TCV
286TSCV
324TCV
25 40 50 324TSCV $711 $623 $711 $623 $711 $623 $711 $623 $711 $623 $711 $623
30 50 60 326TCV
326TSCV
364TCV
40 60 75 364TSCV $1,012 $833 $1,012 $833 $1,012 $833 $1,012 $833 $1,012 $833
50 75 365TCV
365TSCV
60 100 404TSCV $1,296 $1,312 $1,296 $1,312 $1,296 $1,312 $1,296 $1,312
75 125 405TSCV
100 150 444TSCV
125 200 445TSCV $1,814 $1,341 $1,814 $1,341 $1,814 $1,341
150 250 300 447TSCV
200 449TSCV
OSHA standards are vague and differ from each state. The Term OSHA defines a generic type and not a specific standard.
10L2, 10L3
Vertical base includes an OSHA guard
$562 $562 $353$353 $562 $353
3L4, 3L5
4L1
2L4, 2L5
2L6, 3L6
6L2, 8L3
Motor hp at
6L14L4
5L1 8L88L2
10L7, 10L8 12L2-15
8L8 12L2
8L1
8L1
6L7, 8L7
10L7, 10L8 12L2, 12L2-15
6L7, 8L7
5L1
290
Add for the Coupling
Use spacer coupling w/284 frame and larger
4L2, 4L3, 5L3
2L6, 3L6 4L1
265
5L2, 6L3
275 $3,735
265 $3,735
275 $3,735
Motor hp at
5L2, 6L3
$3,735
3L4, 3L5
4L2, 4L3, 5L3
2L4, 2L5
6L2, 8L3
4L4
$4,219
8L2
6L1
$4,066
10L2, 10L3
295
www.cranepumps.com
1/1/20Split Case
Page 14
-
Vertical Split Case Pumps
Mechanical Seal Options
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
Mechanical seals supplied on pumps in section 1100 are non-pusher type elastomer bellows seals -
Type 1 or equivalent, code B/C/CE (Y2). These materials are recommended for water temperatures
up to 180°F and pressures to 150 psi. Dissolved solids limited to 250 PPM.
Unbalanced seals (Buna/Carbon/Ceramic) should be limited to 150 psi suction pressure to insure
optimum seal life.
Mechanic Pump Models1 2 3 4 5 6 7 8
2L4, 2L5 3L4 6L1 12L2C 6L7
2L6, 3L6 3L5 5L1 8L2 10L2A 8L1 8L7
4L2, 4L3 4L1 6L2 10L2 12L2 8L8
5L3 5L2, 6L3 8L3 10L3 10L7, 10L8
Weinman List List List List List List List List
Code Adder Adder Adder Adder Adder Adder Adder Adder
Water to 180°F, 150 psi
B/C/CE
Water to 180°F, 150 psi
B/C/NR - Not Available with NSF372
Water to 300°F, 200 psi
EP/C/SC
Water to 300°F, 200 psi
EP/SC/SC
Water to 250°F, 200 psi
V/C/SC
Water to 250°F, 200 psi
V/SC/SC
Water to 180°F, 250 psi Use Un Bal Use Un Bal
B/C/CE Y58 or Y60 Y58 or Y60
Water to 300°F, 450 psi Use Un Bal Use Un Bal
EP/C/SC Y58 or Y60 Y58 or Y60
Water to 300°F, 450 psi Use Un Bal Use Un Bal
EP/SC/SC Y58 or Y60 Y58 or Y60
Water to 250°F, 450 psi Use Un Bal Use Un Bal
V/C/SC Y58 or Y60 Y58 or Y60
Water to 250°F, 450 psi Use Un Bal Use Un Bal
V/SC/SC Y58 or Y60 Y58 or Y60
Elastomer
B = Buna-N
V = Viton
EP = EPDM/EPR SC = Silicon Carbide
Kynar Separator
PN AS-DK12K-KIT$1,328
$3,559$3,379
$3,156
$3,833
Explanations of Seal Codes - Example B/C/CE
Rotating Face Stationary Face Spring & Retainer
CE = Ceramic
C = Carbon NR = Ni-Resist 18-8 Stainless Steel
Y34 $1,938
Std
$1,722 $1,787 $2,101 $2,197 $2,920 $3,010
$204 $234 $497 $1,070 $1,592 $1,938
Std Std Std
$3,233
$3,144
Y62
Y52
Y60
Y2 $1,531$1,231 $4,470$1,793
$3,628
$4,392
$1,092
$5,551
$3,628$3,379 $3,559
$3,325 $5,312
$6,886
$4,595
$3,833
Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case
$3,948
$4,733
$3,948
$3,597
$1,793
$3,397
$3,274
$3,212
$3,761
$3,551
$3,557
$3,503
$3,365
$3,311
$3,397
$3,274
$3,212
$3,201
Y58 $6,650$3,597$3,393$3,323
Type 1: Unbalanced Seals
$2,920
$1,592
StdStdStdStd
Y62
Y52
Y60
$2,752
$2,437
$2,528
$2,312
$2,696
$2,320
$1,964
$2,376
$2,040
$1,894
$2,943
Service
Y58
Y2
www.cranepumps.com
1/1/20Split Case
Page 15
-
Weinman 1310 JD Series
Two Stage Split Case Pumps
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.Prices subject to change without notice.
Two Stage, Horizontal Split Case Ball Bearing Centrifugal Pumps Options
Standard Construction
Interstage Diaphragm
Water Jacketed BearingsFor boiler feed or booster service when handling a liquid at a temperature of 200° F up to 250° F JD
pumps require water-jacketed outboard bearings. See add price. When handling any liquid at a temperature
above 250° F, JD pumps require both water-jacketed inboard and outboard bearings and high temperature
gaskets. Specify when ordering. Consult factory for temperature above 275° F.
Shaft Steel
Gland Studs and Nuts Bronze
Sleeve Nut Bronze
Shaft Sleeve 416 SS
Gland Bronze
Throat Bushing Bronze
Seal Cage Bronze
Case Wearing Rings Bronze
Casing Cast Iron
Impellers Bronze
www.cranepumps.com
1/1/20Split Case
Page 16
-
Weinman 1310 JD Series
Model JD Pumps, Bases and Adders
CONFIDENTIAL Two Stage, Horizontal Split CaseAll prices in U.S. dollars, F.O.B. Piqua, Ohio. Ball Bearing Centrifugal PumpsPrices subject to change without notice.
Table No: 1 - Pump Only, Standard is packed, mechanical seals are available as an option
1.5JD 2JD 3JD
$11,110 $11,164 $12,732
3" 3" 4"
1.5" 2" 3"
Weight (lb) 494 624
Ceramic Coated 416 SS Sleeves $1,847 $1,847 $1,869
Water Jacketed Thrust Bearing (Inbd/Outbd) ** $1,835 $1,835 $1,835
Water Jacketed Thrust Bearing (Outboard) ** $1,048 $1,048 $1,099
Double Shaft Extension $839 $839 $907
Recirculating Orifice $455 $455 $489
Packed Pump Only
** See information on Page 19
Table No: 2 - Standard Pump with Steel Base, Flexible Coupling and Guard, No Motor (Add motor from "T" frame motor pricing from the Motor Price Book)
Weight List Weight List Weight List
(lb) Price (lb) Price (lb) Price
- 2 145T 610 $11,687 630 $11,764 - -
- 3 182T 610 $11,687 630 $11,764 - -
- 5 184T 610 $11,687 630 $11,764 800 $13,130
- 71/2 213T 628 $11,858 648 $11,858 800 $13,300
15 10 215T 628 $11,858 648 $11,858 800 $13,300
20 15 254T 645 $11,858 665 $11,858 800 $13,394
25 20 256T 645 $11,858 665 $11,858 800 $13,394
30 - 284TS 645 $12,125 665 $12,125 800 $13,567
40 - 286TS 645 $12,125 665 $12,125 815 $13,567
50 - 324TS 670 $12,125 690 $12,125 815 $13,567
60 - 326TS 670 $12,125 690 $12,125 815 $13,567
75 - 364TS 670 $12,900 690 $12,900 825 $14,345
100 - 365TS - - 700 $12,900 825 $14,345
125 - 404TS - - 720 $12,900 900 $14,345
150 - 405TS - - - - 900 $14,345
$937
See Motor Section Pages 2-3 for Mounting of Customer Supplied Motors
Model
List Prices of Adders
Model 1.5JD 2JD
Pump Suction (in)
List Price of Bare Pump
Pump Adders
Pump Discharge (in)
3JD
Pump Suction (in) 3" 3" 4"
OSHA GUARD WITH CLOSED ENDS
Pump Discharge (in) 1.5" 2" 3"
3500 RPM 1750 RPM NEMA
www.cranepumps.com
1/1/20Split Case
Page 17
-
Weinman 1310 JD Series
Model JD Rotating Assemblies
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
The standard rotating assembly is packed, mechanical seals are available as an option
Rotating assemblies consist of all internal components, fully assembled at the factory - please specify impeller trim
when placing an order
The standard rotating assembly is packed, mechanical seals are available as an option
Rotating assemblies consist of all internal components, fully assembled at the factory - please specify impeller trim
when placing an order
Weight List Weight List Weight List
(lb) Price (lb) Price (lb) Price
480 $8,554 494 $8,596 624 $9,804
1.5JD 2JD 3JD
$1,847 $1,847 $1,869
$1,835 $1,835 $1,835
Water Jacketed Thrust Bearing (Outboard) ** $1,048 $1,048 $1,099
$839 $839 $907
$455 $455 $489
Packed Pump Only
Remember to add all appropriate adders to the rotating assembly when ordering. Please refer to the original
serial number when placing an order.
For mechanical seal adders, please see the following page
2JD 3JD
Pump Suction (in) 3" 3" 4"
Model 1.5JD
Recirculating Orifice
2" 3"
Rotating Assembly List Price
Ceramic Coated 416 SS Sleeves
Water Jacketed Thrust Bearing (Inbd/Outbd) **
Pump Discharge (in) 1.5"
Double Shaft Extension
Rotating Assembly AddersList Prices of Adders
www.cranepumps.com
1/1/20Split Case
Page 18
-
Weinman 1310 JD Series
Mechanical Seals & Options
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
Rotation
Pumps are assembled in Right Hand (clockwise) rotation with suction on right when viewed from
driving end unless otherwise specified. Left Hand (counter clockwise) rotation available. Specify at the time of order.
No Extra Charge
Flange Ratings
Pump discharge flanges conform to American Standard for cast iron, class 250 (BIGB-1944) except that they
have flat face instead of .0625" raised face. Pump suction flanges conform to American Standard for cast iron,
class 125 (BIG 1-1948). Companion Flanges are not included with pump.
** Recirculating Orifice **
Steam flashing may occur when pumping high temperature liquids at or near pump shut-off head. Add for non-corrosive
recirculating orifices consisting of a machined brass body with .5" internal pipe threads and a removable, hardened
stainless steel insert orifice. Various size inserts are available to maintain flow of 1/2 GPM per BHP at shut off head.
Non-corrosive brass with 1/2" internal pipe threads and removeable hardened SS insert orifice $507 List
Tests: All pumps are hydrostatic pressure tested at 1-1/2 times the discharge pressure, minimum test
of 125 PSIG when assembled. Refer to Test Price Pages to order a certified test and report
Export: Export boxing - Refer to International Inside Sales
Standard Packing: Standard graphite filament lubricated packing - max 275 °F (-M21)
** Water Jacketed Bearings **
For boiler feed or booster service when handling a liquid at a temperature of 200°F up to 250°F, JD
pumps require water-jacketed outboard bearings. See add price. When handling any liquid at a temperature
above 250° F, JD pumps require both water-jacketed inboard and outboard bearings and high temperature
gaskets. Please specify when ordering. Consult the factory for temperature above 275° F.
1.5JD 2JD 3JD
Y34 B/C/NR Carbon Ni Resist Buna N 150 180 $116 $125 $133
Y2 B/C/CE Carbon Ceramic Buna N 150 180 $125 $165 $408
Y10 B/C/TC Carbon Tungsten Buna N 150 180 $796 $952 $1,220
Y6 V/C/NR Carbon Ni Resist Viton 150 250 $222 $245 $300
Y25 V/C/CE Carbon Ceramic Viton 150 250 $490 $593 $845
Y17 V/C/TC Carbon Tungsten Viton 150 250 $1,605 $1,820 $1,986
Packing Adder: Carbon Filament/Graphite Packing $286
Notes:
1. Price includes two single seals with flexible mounted stationary seats and flush type gland plates of the same
material as the casing.
V = Viton CE = Ceramic Steel
TC = Tungsten Carbide
1
B = Buna-N NR = Ni-resist 18-8 Stainless
C = Carbon
Single
Seal
Seal
Type
Explanations of Seal Codes
Elastomer Rotating Face Stationary Face Spring & Retainer
Based on Pump Size
List Price AdderSeal
Code
Rotating
Face
Stationary
Face,
O-Ring Mt'd
Bellows or
Shaft
Packing
Max
Pressure
PSIG
Temp Limit
°F
www.cranepumps.com
1/1/20Split Case
Page 19
-
Weinman 1210 L SeriesNSF 61 / 372
Single Stage Horizontal Split Case Pumps
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
NSF 61 / 372 Standard Materials of ConstructionThe table below shows materials of construction for Standard Pumps only without adders
Item Description
Casing
Impeller Aluminum
Case wear ring (2 qty)
Impeller wear ring (2 qty if
provided as standard)
Shaft Sleeve (2 qty)
Mechanical seal (2 qty)
Seal collar (2 qty)
Flush Piping
Maximum Working Pressures
Models
Flanges 125 Lb FF 300 Lb FF
Case material Cast Iron Ductile Iron
Max Temp
Max Working Pressure 150 psig * 250 psig
FF = Flat Face
150 Lb ASA Flanges have same drilling as 150 Lb Flat Face steel flanges
300 Lb ASA Flanges have same drilling as 300 Lb Flat Face steel flanges
Working pressures are non-shock service
* Cast iron 6L7 and 8L8 have 250 lb. Flat Face Discharge Flange and Casing designed for 215 PSIG
maximum working pressure.
73.4°F / 23°C 73.4°F / 23°C 73.4°F / 23°C
175 psig 450 psig
L1 ~ L6 L7 & L8
125 Lb FF 300 Lb FF
Cast Iron Ductile Iron
Shaft collar (2 qty)
Sleeveless design (L1, L2, L3, L4, L5, L6):
416SS
Sleeveless design (L1, L2 except 12L2C, L3, L4,
L5, L6):
416SS
Sleeved design (L7, L8):
None
12L2C and Sleeved design (L7, L8):
None
Copper tube with SS fittings Copper tube with SS fittings
416SS (L7 & L8 only) 416SS
Unbalanced Single Type 1, Buna/Carbon/Ceramic
FDA approved
Balanced Single Type 1, Buna/Carbon/Ceramic FDA
approved in L1, L2, L3, L4, L5 and L6;
Unbalanced Single Type 1, Buna/Silicon
Carbide/Silicon Carbide FDA approved in L7, L8 and
12L2C
416SS in L1, L2, L3, L4, L5, L6;
None in L7 & L8None
None in 2L, 3L, 4L, 5L, 6L;
Aluminum Bronze in 4L1B, 8L, 10L & 12L
None in 2L, 3L, 4L, 5L, 6L;
Aluminum Bronze in 4L1B, 8L, 10L & 12L
Shaft
Sleeveless design (L1, L2, L3, L4, L5, L6):
416SS
Sleeveless design (L1, L2, L3, L4, L5, L6):
416SS
Sleeved design (L7, L8):
4140 alloy steel
Sleeved design (L7, L8):
4140 alloy steel
125# Flange Rating 300# Flange RatingCast iron Ductile iron
Aluminum Bronze Aluminum Bronze
1/1/20Split Case
Page 20
-
Weinman 1210 L Series
NSF 61 / 372Single Stage Horizontal Split Case Pumps
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
Standard pump Construction:
L1, L2, L3, L4, L5, L6: 416SS shaft, sleeveless, Aluminum Bronze rings, FDA approved B/C/CE seal
L7, L8: Steel shaft, 416SS sleeves, Aluminum Bronze rings, FDA approved B/C/CE seal
See the seal options page for more choicesPlease specify pump rotation and impeller trim when placing an order
All list prices mentioned are for NSF 61 / 372 unless otherwise specifically mentioned
List Adders For NSF 61 / 372
Sleeveless
Shaft300# Flange
Model SizeCurve
NumberRPM Weight
Standard
NSF
61/372
List Price
Aluminum
Bronze
impeller
wear ring
(qty 2)
12% Cr SS
impeller
wear ring
(qty 2)
316SS shaft
Steel shaft
(sleeved
design) §
416SS shaft
(sleeved
design)
316SS shaft
(sleeved
design)
416SS
Sleeve
(qty 2)
316SS
sleeve
(qty 2)
Ductile Iron
flanges -
requires
use of a
balanced
seal
2L4A 2X3X10A2L4-182
2L4-362
1750
3500270 $5,508 $484 $680 $2,119 $990 $2,145 $2,548 $714 $2,111 $719
2L5 2X3X142L5-122
2L5-183
1150
1750310 $8,407 $484 $680 $2,119 $990 $2,145 $2,548 $714 $2,111 $909
2L6 2X3X12 2L6-182 1750 290 $5,823 $484 $680 $2,119 $990 $2,145 $2,548 $714 $2,111 $1,631
3L4 3X4X103L4-181
3L4-361
1750
3500380 $6,438 $558 $810 $2,180 $990 $2,258 $2,596 $714 $2,180 $291
3L5 3X4X143L5-121
3L5-182
1150
1750450 $5,140 $558 $810 $2,180 $990 $2,258 $2,596 $714 $2,180 $1,052
3L6 3X4X12 3L6-182 1750 390 $4,513 $558 $810 $2,180 $990 $2,258 $2,596 $714 $2,180 $2,474
4L1A 4X5X14A4L1-122
4L1-184
1150
1750530 $5,430 $600 $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $2,221
4L1B 4X5X14B 4L1-182 1750 530 $6,344 std $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $2,182
4L2 4X5X11 4L2-182 1750 375 $4,852 $600 $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $3,240
4L3 4X5X8 4L3-182 1750 330 $8,769 $600 $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $884
4L4 4X6X104L4-181
4L4-361
1750
3500485 $7,814 $600 $1,347 $2,713 $990 $2,338 $2,596 $716 $2,422 $2,227
5L1 5X6X155L1-121
5L1-181
1150
1750710 $10,156 $651 $1,347 $2,336 $990 $2,629 $2,990 $716 $2,964 $749
5L2 5X6X12 5L2-184 1750 520 $9,819 $651 $1,347 $2,336 $990 $2,629 $2,990 $716 $2,964 $761
5L3 5X6X9 5L3-182 1750 420 $7,669 $651 $1,347 $2,336 $990 $2,629 $2,990 $716 $2,964 $2,720
6L1 6X8X16A6L1-122
6L1-182
1150
17501020 $6,046 $709 $1,528 $2,336 $1,061 $2,692 $3,106 $1,191 $3,304 $1,840
6L2 6X8X126L2-121
6L2-182
1150
1750615 $7,816 $709 $1,528 $2,336 $1,061 $2,692 $3,106 $1,191 $3,304 $466
6L3 6X8X96L3-121
6L3-182
1150
1750520 $8,781 $709 $1,528 $2,336 $1,061 $2,692 $3,106 $1,191 $3,304 $737
6L7* 6x8x20 PC3644 1750 840 $21,349 $709 $1,528 n/a std $2,692 $3,106 std $3,304 $528
Prices mentioned above are adders only, and not actual component prices. Consult factory for replacement prices.
* sleeved design, all others are standard sleeveless
§ steel shaft always requires 416SS or 316SS sleeves, and not available in balanced design. Sleeves have to chosen separately from above table.
416SS/ 316SS sleeve prices mentioned above have to be added separately to the sleeved shaft price (sleeved shaft prices do not include price of sleeves)
Other options may be available for NSF372 only, at additional cost. Consult factory for pricing.
n/a = not available cf = consult factory std = standard For Oil Lube Bearings, Refer to Factory.
Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case (L1 - L6) See seal options for L7 & L8, Type 1 working pressures
sleeve options mentioned above are for unbalanced seals only. List prices for 416SS & 316SS sleeve options for balanced seals are included in balanced seal list price. Refer to seal options page for balanced
seal options.
Impeller Rings Sleeved Shaft Sleeves
1/1/20Split Case
Page 21
-
Weinman 1210 L Series
NSF 61 / 372Single Stage Horizontal Split Case Pumps
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
Standard pump MOC:
L1, L2, L3, L4, L5, L6: 416SS shaft, sleeveless, Aluminum Bronze rings, FDA approved B/C/CE seal
L7, L8: Steel shaft, 416SS sleeves, Aluminum Bronze rings, FDA approved B/C/CE seal
See the seal options page for more choicesPlease specify pump rotation and impeller trim when placing an order
All list prices mentioned are for NSF 61 / 372 unless otherwise specifically mentioned
List Adders For NSF 61 / 372
Sleeveless
Shaft
300#
Flange
Model SizeCurve
NumberRPM Weight
Standard
NSF 61/372
List Price
Aluminu
m Bronze
impeller
wear ring
(qty 2)
12% Cr SS
impeller
wear ring
(qty 2)
316SS
shaft
Steel shaft
(sleeved
design) §
416SS
shaft
(sleeved
design)
316SS
shaft
(sleeved
design)
416SS
Sleeve
(qty 2)
316SS
sleeve
(qty 2)
Ductile Iron
flanges -
requires
use of a
balanced
seal
8L1 8X10X16
8L1-121
8L1-151
8L1-181
1150
1450
1750
1550 $14,874 std $1,528 $2,449 $1,240 $2,784 $3,163 $1,839 $3,813 $561
8L2A 8X10X128L2-121
8L2-181
1150
17501030 $9,081 std $1,528 $2,449 $1,240 $2,784 $3,163 $1,839 $3,813 $1,675
8L2B 8X10X13
8L2-122
8L2-152
8L2-182
1150
1450
1750
1030 $14,253 std $1,528 $2,449 $1,240 $2,784 $3,163 $1,839 $3,813 $553
8L3 8X10X108L3-122
8L3-182
1150
1750875 $11,906 std $1,528 $2,449 $1,240 $2,784 $3,163 $1,839 $3,813 $755
8L7* 8X10X17 PC3658 1750 965 $17,029 std $1,528 n/a std $2,784 $3,163 std $3,813 $1,811
8L8* 8X10X20 PC3661 1750 1100 $18,978 std $1,528 n/a std $2,784 $3,163 std $3,813 $1,317
10L2A 10X12X1410L2A-122
10L2A-182
1150
17502000 $19,047 std $1,622 $2,810 $1,489 $3,178 $3,406 $1,940 $4,067 $618
10L3A 10X12X12 10L3-182 1750 1470 $13,925 std $1,622 $2,810 $1,489 $3,178 $3,406 $1,940 $4,067 $3,882
10L3B 10X12X11B 10L3-121 1150 1470 $15,993 std $1,622 $2,810 $1,489 $3,178 $3,406 $1,940 $4,067 $3,572
10L7* 10X12X14.5 PC3669 1750 1275 $17,015 std $1,622 n/a std $3,178 $3,406 std $4,067 $5,084
10L8* 10X12X17 PC3673 1750 1375 $21,830 std $1,622 n/a std $3,178 $3,406 std $4,067 $2,445
12L2A 12X12X14A12L2-123
12L2-183A
1150
17501800 $18,060 std $1,702 $3,115 $1,527 $3,249 $3,406 $2,759 $4,288 $5,771
12L2B 12X12X14
12L2-124
12L2-151
12L2-184
1150
1450
1750
1800 $17,763 std $1,702 $3,115 $1,527 $3,249 $3,406 $2,759 $4,288 $5,771
12L2C 12X12X15** 12L2-184A 1750 1800 $22,560 std $1,702 $3,115 n/a n/a n/a n/a n/a cf
Prices mentioned above are adders only, and not actual component prices. Consult factory for replacement prices.
* sleeved design, all others are standard sleeveless
** Heavy duty shaft over 13.50" diameter
§ steel shaft always requires 416SS or 316SS sleeves, and not available in balanced design. Sleeves have to chosen separately from above table.
416SS/ 316SS sleeve prices mentioned above have to be added separately to the sleeved shaft price (sleeved shaft prices do not include price of sleeves)
Other options may be available for NSF372 only, at additional cost. Consult factory for pricing.
n/a = not available cf = consult factory std = standard For Oil Lube Bearings, Refer to Factory.
Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case (L1 - L6) See seal options for L7 & L8, Type 1 working pressures
sleeve options mentioned above are for unbalanced seals only. List prices for 416SS & 316SS sleeve options for balanced seals are included in balanced seal list price. Refer to seal options page for
balanced seal options.
Impeller Rings Sleeved Shaft Shaft Sleeves
1/1/20Split Case
Page 22
-
Weinman 1210 L Series
NSF 61 / 372Single Stage Horizontal Split Case Rotating Assemblies
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
STANDARD PUMP MULTIPLIER APPLIESStandard pump MOC:
L1, L2, L3, L4, L5, L6: 416SS shaft, sleeveless, Aluminum Bronze rings, FDA approved B/C/CE seal
L7, L8: Steel shaft, 416SS sleeves, Aluminum Bronze rings, FDA approved B/C/CE seal
See the seal options page for more choicesPlease specify pump rotation and impeller trim when placing an order
All list prices mentioned are for NSF 61 / 372 unless otherwise specifically mentioned
List Adders For NSF 61 / 372
Sleeveless
Shaft
Model SizeCurve
NumberRPM Weight
Standard
NSF
61/372 List
Price
Aluminum
Bronze
impeller
wear ring
(qty 2)
12% Cr SS
impeller
wear ring
(qty 2)
316SS shaft
Steel shaft
(sleeved
design) §
416SS
shaft
(sleeved
design)
316SS
shaft
(sleeved
design)
416SS
Sleeve
(qty 2)
316SS
sleeve
(qty 2)
2L4A 2X3X10A2L4-182
2L4-362
1750
3500270 $3,547 $484 $680 $2,119 $1,092 $2,365 $2,548 $714 $2,111
2L5 2X3X142L5-122
2L5-183
1150
1750310 $5,999 $484 $680 $2,119 $1,092 $2,365 $2,548 $714 $2,111
2L6 2X3X12 2L6-182 1750 290 $4,568 $484 $680 $2,119 $1,092 $2,365 $2,548 $714 $2,111
3L4 3X4X103L4-181
3L4-361
1750
3500380 $4,653 $558 $810 $2,180 $1,092 $2,489 $2,596 $714 $2,180
3L5 3X4X143L5-121
3L5-182
1150
1750450 $3,523 $558 $810 $2,180 $1,092 $2,489 $2,596 $714 $2,180
3L6 3X4X12 3L6-182 1750 390 $3,539 $558 $810 $2,180 $1,092 $2,489 $2,596 $714 $2,180
4L1A 4X5X14A4L1-122
4L1-184
1150
1750530 $3,817 $600 $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422
4L1B 4X5X14B 4L1-182 1750 530 $4,611 std $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422
4L2 4X5X11 4L2-182 1750 375 $3,729 $600 $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422
4L3 4X5X8 4L3-182 1750 330 $6,304 $600 $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422
4L4 4X6X104L4-181
4L4-361
1750
3500485 $6,140 $600 $1,347 $2,713 $1,092 $2,577 $2,596 $716 $2,422
5L1 5X6X155L1-121
5L1-181
1150
1750710 $7,863 $651 $1,347 $2,336 $1,092 $2,898 $2,990 $716 $2,964
5L2 5X6X12 5L2-184 1750 520 $7,760 $651 $1,347 $2,336 $1,092 $2,898 $2,990 $716 $2,964
5L3 5X6X9 5L3-182 1750 420 $6,412 $651 $1,347 $2,336 $1,092 $2,898 $2,990 $716 $2,964
6L1 6X8X16A6L1-122
6L1-182
1150
17501020 $3,605 $709 $1,528 $2,336 $1,170 $2,967 $3,106 $1,191 $3,304
6L2 6X8X126L2-121
6L2-182
1150
1750615 $5,335 $709 $1,528 $2,336 $1,170 $2,967 $3,106 $1,191 $3,304
6L3 6X8X96L3-121
6L3-182
1150
1750520 $6,338 $709 $1,528 $2,336 $1,170 $2,967 $3,106 $1,191 $3,304
6L7* 6x8x20 PC3644 1750 840 $16,010 $709 $1,528 n/a std $2,967 $3,106 std $3,304
Prices mentioned above are adders only, and not actual component prices. Consult factory for replacement prices.
* sleeved design, all others are standard sleeveless
§ steel shaft always requires 416SS or 316SS sleeves, and not available in balanced design. Sleeves have to chosen separately from above table.
416SS/ 316SS sleeve prices mentioned above have to be added separately to the sleeved shaft price (sleeved shaft prices do not include price of sleeves)
Other options may be available for NSF372 only, at additional cost. Consult factory for pricing.
n/a = not available cf = consult factory std = standard For Oil Lube Bearings, Refer to Factory.
Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case (L1 - L6) See seal options for L7 & L8, Type 1 working pressures
sleeve options mentioned above are for unbalanced seals only. List prices for 416SS & 316SS sleeve options for balanced seals are included in balanced seal list price. Refer to seal options
page for balanced seal options
SleevesSleeved ShaftImpeller Rings
1/1/20Split Case
Page 23
-
Weinman 1210 L Series
NSF 61 / 372Single Stage Horizontal Split Case Rotating Assemblies
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
STANDARD PUMP MULTIPLIER APPLIESStandard pump MOC:
L1, L2, L3, L4, L5, L6: 416SS shaft, sleeveless, Aluminum Bronze rings, FDA approved B/C/CE seal
L7, L8: Steel shaft, 416SS sleeves, Aluminum Bronze rings, FDA approved B/C/CE seal
See the seal options page for more choicesPlease specify pump rotation and impeller trim when placing an order
All list prices mentioned are for NSF 61 / 372 unless otherwise specifically mentioned
List Adders For NSF 61 / 372
Sleeveless
Shaft
Model SizeCurve
NumberRPM Weight
Standard
NSF
61/372
List Price
Aluminum
Bronze
impeller
wear ring
(qty 2)
12% Cr SS
impeller
wear ring
(qty 2)
316SS shaft
Steel shaft
(sleeved
design) §
416SS
shaft
(sleeved
design)
316SS
shaft
(sleeved
design)
416SS
Sleeve
(qty 2)
316SS
sleeve
(qty 2)
8L1 8X10X16
8L1-121
8L1-151
8L1-181
1150
1450
1750
1550 $10,381 std $1,528 $2,449 $1,368 $3,068 $3,163 $1,839 $3,813
8L2A 8X10X128L2-121
8L2-181
1150
17501030 $6,200 std $1,528 $2,449 $1,368 $3,068 $3,163 $1,839 $3,813
8L2B 8X10X13
8L2-122
8L2-152
8L2-182
1150
1450
1750
1030 $10,567 std $1,528 $2,449 $1,368 $3,068 $3,163 $1,839 $3,813
8L3 8X10X108L3-122
8L3-182
1150
1750875 $8,345 std $1,528 $2,449 $1,368 $3,068 $3,163 $1,839 $3,813
8L7* 8X10X17 PC3658 1750 965 $12,443 std $1,528 n/a std $3,068 $3,163 std $3,813
8L8* 8X10X20 PC3661 1750 1100 $13,613 std $1,528 n/a std $3,068 $3,163 std $3,813
10L2A 10X12X1410L2A-122
10L2A-182
1150
17502000 $13,835 std $1,622 $2,810 $1,641 $3,505 $3,406 $1,940 $4,067
10L3A 10X12X12 10L3-182 1750 1470 $10,185 std $1,622 $2,810 $1,641 $3,505 $3,406 $1,940 $4,067
10L3B 10X12X11B 10L3-121 1150 1470 $10,655 std $1,622 $2,810 $1,641 $3,505 $3,406 $1,940 $4,067
10L7* 10X12X14.5 PC3669 1750 1275 $12,434 std $1,622 n/a std $3,505 $3,406 std $4,067
10L8* 10X12X17 PC3673 1750 1375 $15,323 std $1,622 n/a std $3,505 $3,406 std $4,067
12L2A 12X12X14A12L2-123
12L2-183A
1150
17501800 $13,153 std $1,702 $3,115 $1,683 $3,582 $3,406 $2,759 $4,288
12L2B 12X12X14
12L2-124
12L2-151
12L2-184
1150
1450
1750
1800 $12,974 std $1,702 $3,115 $1,683 $3,582 $3,406 $2,759 $4,288
12L2C 12X12X15** 12L2-184A 1750 1800 $16,483 std $1,702 $3,115 n/a n/a n/a n/a n/a
Prices mentioned above are adders only, and not actual component prices. Consult factory for replacement prices.
* sleeved design, all others are standard sleeveless
** Heavy duty shaft over 13.50" diameter
§ steel shaft always requires 416SS or 316SS sleeves, and not available in balanced design. Sleeves have to chosen separately from above table.
416SS/ 316SS sleeve prices mentioned above have to be added separately to the sleeved shaft price (sleeved shaft prices do not include price of sleeves)
Other options may be available for NSF372 only, at additional cost. Consult factory for pricing.
n/a = not available cf = consult factory std = standard For Oil Lube Bearings, Refer to Factory.
Type 1B: Balanced Seals (Includes Sleeves) - Required with the use of a ductile iron case (L1 - L6) See seal options for L7 & L8, Type 1 working pressures
sleeve options mentioned above are for unbalanced seals only. List prices for 416SS & 316SS sleeve options for balanced seals are included in balanced seal list price. Refer to seal options
page for balanced seal options.
Sleeved ShaftImpeller Rings Sleeves
1/1/20Split Case
Page 24
-
Weinman 1210 L SeriesBase Assemblies & Special Couplings
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
Weight List Weight List Weight List Weight List Weight List Weight List
(lb) Price (lb) Price (lb) Price (lb) Price (lb) Price (lb) Price
3/4 1-1/2 143T
1 1-1/2 - 2 2 - 3 145T
1-1/2 3 5 182T $1,173 170 $1,207 190 $1,329
5 7-1/2 184T
3 7-1/2 10 213T
5 10 15 215T
7-1/2 15 20 254T
10 20 25 256T
15 25 284T
30 284TS 200 $1,427 210 $1,470 220 $1,573 340 $1,939 350 $2,190 400 $2,272
20 30 286T
40 286TS
25 40 324T
50 324TS 230 $1,544 230 $1,524 240 $1,690 360 $2,055 370 $2,306 420 $2,320
30 50 326T
60 326TS
40 60 364T
75 364TS 240 $1,677 250 $1,796 370 $2,187 380 $2,446 430 $2,453
50 75 365T
365TS
60 100 404T
404TS 270 $2,432 400 $2,594 410 $3,144 460 $3,126
75 125 405T
405TS
100 150 444T
125 200 445T 460 $2,833 470 $3,508 520 $3,514
150 250…300 447T
200 449T
Metal Flex Metal Flex Metal Flex Metal Flex Metal Flex Metal Flex
Grid Spacer Grid Spacer Grid Spacer Grid Spacer Grid Spacer Grid Spacer
3/4 1-1/2 143T
1 1-1/2 - 2 2 - 3 145T
1-1/2 3 5 182T $215 $260 $215 $260 $215 $260
2 5 7-1/2 184T
3 7-1/2 10 213T
5 10 15 215T
7-1/2 15 20 254T
10 20 25 256T
15 25 284T
30 284TS $248 $411 $248 $411 $248 $411 $248 $411
20 30 286T
40 286TS
25 40 324T
50 324TS $284 $507 $284 $507 $284 $507 $284 $507 $284 $507 $284 $507
30 50 326T
60 326TS
40 60 364T
75 364TS $405 $679 $405 $679 $405 $679 $405 $679 $405 $679
50 75 365T
365TS
60 100 404T
404TS $518 $1,069 $518 $1,069 $518 $1,069 $518 $1,069
75 125 405T
405TS
100 150 444T
125 200 445T $722 $1,089 $722 $1,089 $722 $1,089
150 250…300 447T
200 449T
OSHA standards are vague and differ from each state. The Term OSHA defines a generic type and not a specific standard.
Base Plate Drip Pan Options are available on the following pageSee the next page for the Hytrel Coupling Statement
2L6, 3L6 4L1 5L1 8L2 8L8 8L1
2L4, 2L5 3L4, 3L5 4L4 6L1 6L7, 8L7
4L1
10L7 12L2
1150
RPM
1750
RPM
3550
RPM
Motor
Frame
5L3 6L3 8L3 10L3
Steel Centerdrain Base, Flexible Coupling
and OSHA Guard, No Motor4L2, 4L3 5L2 6L2 10L2
12L2-15
180 $1,228 200 $1,267 210 $1,431
10L8
$215 $288 $215
12L2-154L2, 4L3, 5L3 5L2, 6L3 6L2, 8L3 10L2, 10L3
$288 $215 $288
10L7, 10L8
8L1
2L6, 3L6
1150
RPM
1750
RPM
3550
RPM
Motor
Frame
Special Coupling Adders - List Price 5L1 8L2 8L8 12L22L4, 2L5 3L4, 3L5 4L4 6L1 6L7, 8L7
1/1/20Split Case
Page 25
-
Weinman 1210 L SeriesBase Assembly Drip Pan Adder
CONFIDENTIALAll prices in U.S. dollars, F.O.B. Piqua, Ohio.
Prices subject to change without notice.
Note - Drip pan base dimensions are different than the published base dimensions
Please consult the factory if a dimensional drawing is required
Motor Drip Pan
Frame
56 $587
143T-145T $587
182T-184T $587
213T-215T $587
254T-256T $652
284T-286T $652
324TS-326T $652
364TS-365T $652
404TS-405T $751
444TS-445T $751
Weinman base and frame mounted pumps with motors of frame size 365 or larger
use Hytrel sleeves in the couplings. Hytrel sleeves are not suitable for variable
speed systems and must be replaced with an all metal coupling, because of space
and torque requirements.
1/1/20Split Case
Page 26
-
Weinman 1210 L SeriesNSF 61 / 372 Mechanical Seal Options
CONFIDENTIAL All prices in U.S. dollars, F.O.B. Piqua, Ohio. Prices subject to change without notice.
Mechanical seals supplied on pumps in section 1210 are FDA Approved non-pusher type elastomer bellows seals -
Type 1 or equivalent, code B/C/CE (Y2F)
These materials are recommended for water pressures to 150 psi. Disolved solids limited to 250 PPM.
Unbalanced seals (carbon/ceramic & carbon/ni-resist) should be limited to 150 psi suction pressure to insure optimum seal life.
2L4A, 2L5, 2L6 3L4, 3L5 4L4 6L1 10L2 6L7 8L1 12L2C
3L6 4L1A, 4L1B 5L1 8L2A, 8L2B 8L7, 8L8 12L2A, 12L2B
4L2, 4L3 5L2 6L2 10L3A, 10L3B 10L7, 10L8
5L3 6L3 8L3
Type 1: Adder For Unbalanced Sleeveless Seals With Standard 416SS Seal Collar
Seal List List List List List List List List
Code Adder Adder Adder Adder Adder Adder Adder Adder
Water to 150 psi
B/C/CE
Water to 200 psi
B/SC/SC
Water to 150 psi
B/C/CE
Water to 200 psi
B/SC/SC
Water to 150 psi
B/C/CE
Water to 200 psi
B/SC/SC
Water to 150 psi
B/C/CE
Water to 200 psi
B/SC/SC
Other seal options may be available for NSF372 only, at additional cost. Consult factory for pricing.
All prices above are list prices.
Prices mentioned above are adders only, and not actual seal prices. Consult factory for seal prices for replacement.
* design does not have seal collar
§ adder for seal collar only, does not include seal. To be added separetely to seal prices
## Sleeves included with balanced seals are not the same as sleeves of unbalanced sleeved seals
Elastomer
B = Buna-N
EP = EPDM/EPR
Explanations of Seal Codes - Example B/C/CE
Service
Stationary Face Spring & Retainer
C = Carbon CE = Ceramic
SC = Silicon Carbide
1 = 18-8 Stainless
SC = Silicon Carbide
Rotating Face
Type 1B: Balanced Seals (Includes 316SS sleeves) - Required with the use of a ductile iron case ##
Y2F $2,754 $2,890 $2,995 $3,204 $3,227 n/a $5,222 n/a
Y39F $4,329 $4,883
unbalanced
Y39FY39F $4,157 $4,200 $4,200 $4,936 $4,957
unbalanced
Y39F$7,056
$6,958unbalanced
Y39F
Type 1B: Balanced Seals (Includes 416SS sleeves) - Required with the use of a ductile iron case ##
Y2F $2,695 $2,760 $2,916 $2,990 $2,990 n/a $3,980 n/a
$2,270 $2,353 n/a
Adder For Optional 316SS Seal Collar With Unbalanced Sleeved Seals (both Y2F and Y39F) §
J4 $173 $173 $510 $510 $510
Y39F $679 $771 $843 $2,145 $2,145
n/a $510 n/a
$4,952 $5,074 $5,074unbalanced
Y39F
Type 1: Unbalanced Seals for use with Shaft Sleeves, With Standard 416SS Seal Collar
Y2F $626 $626 $755 $755 $938 std* $1,127 n/a
Adder For Optional 316SS Seal Collar With Unbalanced Sleeveless Seals (both Y2F and Y39F) §
J4 $173 $173 $510 $510 $510 n/a $510 $510
Y39F $457 $509 $563 $612 $612 n/a $1,006 $1,006
Pump Models
Y2F std std std std std n/a std std
1/1/20Split Case
Page 27