Wedding Bear Bride : Assembly Instructions Page · Assemble the body B Use pattern: Page4/Page5. B1...
Transcript of Wedding Bear Bride : Assembly Instructions Page · Assemble the body B Use pattern: Page4/Page5. B1...
A1 H
ead
Notation Key
Notation Key
Tools
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
Scissors lineMountain foldValley foldGlue spotGlue reverse sideParts No.A1, B1
Scissors line
Triangular glue tab
Glue spot Parts No.
Assemble the headA
Parts name
Glue down the glue tabs one at a time in turn.
Cut a slot right in to the apex ofthe triangular glue tab.
A1
A1
A1
A1A1
Use pattern: Page2/Page3.
Wedding Bear Bride : Assembly Instructions Page
Canon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
The Assembly instructions are divided into seven blocks: A (head), B (body), C (legs), D (dress), E (ribbon), F (arm), and G (veil and bouquet).Follow the instructions for each block to assemble your teddy bear.
<Caution>Keep scissors and glue away from small children.Be careful not to cut your fingers when using scissors.
marks a basic assembly technique that remains the same regardless of the part. Instructions are printed only for the first instance.
Cut out A1 by cutting along the lines.Cut along the line marked .
Trace along the mountain fold line with a pencil, scoring it to make it easier to fold.
Make a mountain fold on A1.
Using the photo as a guide, apply pressure with the palm of your hand, gradually curling the paper in the direction of the arrow.
The parts will be easier to assemble if curled.
Add a slight curl to A1 when attaching it.
Using the photo as a guide, attach in the direction of the arrow.Attach the triangular glue tabs so that the front side becomes convex.
Assemble the bodyUse pattern: Page4/Page5.B
B1
A1
A8
A8A2
A9A9 A9
A9A3
A3 A2
A1A1
A4
A4
A4
A6
A5
A5
A3
A2
A1A5A6
A7
A7
A4
B1
B2B2
Glue together the remaining glue spots.
A2 Head
A2
A2
Wedding Bear Bride : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Cut out A2 and A3, curl them and glue the triangular glue tabs, attaching each to A1.
Assemble A4 and attach it to A5.
Assemble A6 and A7 in the same way and attach the ears to the head.
Assemble A8 and attach to the head.Assemble A9.
Assemble B1.
Assemble B2.
*Note: The completed A9 will be attached in the last step.
*Note: The completed head will be fitted in a later step.
B1
B1
B2 B2
B1
C2
C3
C4
C6
C7
C5
C1
C2
C2
C3
C4
C3
C6C5
C7
C8
C9 C10C11
C12C13 C14
C6
C6C6
C6C13
B2
B2
B1
B1
C7
C5
C4
B3 B3
Assemble the legsUse pattern: Page6/Page7.C
C7
Leave the protruding part out.
Return C7 to itsoriginal position.
Do not put glue on the protruding parts.
C7
Wedding Bear Bride : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Assemble parts C2 through C7.
Attach C1 through C7 together.
Assemble parts C8 through C14 in the same way.
Fit both legs to the completed body.
Attach B1 and B2 together.
Assemble B3 and attach it to B1 to complete the body.
D1
D5
D5D1
D3
D6
D3
D4D9
D8 D8D7
D3D3
D1D1
D8D8
D7
D9
D10
D9D10
D1D5 D6
D1D3
D3
D10
D1
D5
D1
D3
D1
D5 D2
D4
D6
D3D6
D3
D1
D2 D1
D1
D2
Assemble the dressUse pattern: Page8/Page9/Page10/Page11.D
Match up the shapes of the glue spots and then stick them together.
D7
D9
D10
Check front and back, then stick together.
Check front and back, then stick together.
Wedding Bear Bride : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Attach D1 and D2.Assemble D3 and D4 in the same way, then attach D1 and D3.
Assemble D9 and D10 and stick them together.
Attach D9,D10 to the skirt,to complete the dress.
Attach D5 and D6 to the skirt.
Assemble D8 and attach it to D7.
Attach D7 and D8 to the skirt.
E1 E1
E1
E1
E2
E2
E2
E3
E2
E4E3
E5
E1
E3
E5E2
E4
E5
E3
E1
E1D10
Assemble the ribbonUse pattern: Page12.E
Wedding Bear Bride : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Assemble E1.
Fit the dress over the body, to complete the ribbon.
Assemble E2 and attach it to E3.Attach E4 and E5 in the same way.
Attach E2, E3, E4, E5 to E1.
Attach the ribbon to the dress.
F1
F2
F3
F4
F5
F6
F6 F6
F11 F5
B1
F5
F5
F5
F6
F1
F2
F2
F3
F3
B3
B3
F4
F4
F5
F5
F6
F7
F10
F8F9
F11
F12
Assemble the armUse pattern: Page13.F
Do not put glue on the protruding parts.
Leave the protruding part out.
Return F6 to its original position.
Return B3 to its original position.
Wedding Bear Bride : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Assemble parts F1 through F6.
Fit the head to the body and attach A9.
Attach F1 through F6 together.
Assemble parts F7 through F12 in the same way.
Fit both arms to the completed body.
A9
G1
G2
G1
G2G5
G1
G2
G3
G4G5
G6
G5
G16G17G18G19
G20G21G22G23
G24G25G26G27
G15
G6
G7
G8
G9
G10G10
G10
G8 G7
G9
G9
G11
G28
G1
G2
G11 G11
G13
G13 G14G12
G12G14
G15
G11
G15
Open out the petals and then stick them together.
Glue here.
Match up the lines.Assemble G3 and G4 in the same way.
Match up the shapes of the glue spots and then stick them together.
Assemble the veil and bouquetUse pattern: Page14/Page15.G
G8
Wedding Bear Bride : Assembly InstructionsCanon is a registered trademark of Canon Inc. Katsuyuki Shiga(PinoArt)
Page
Assemble G1, G2 and G3, G4 and attach G5.
Assemble G15 and attach it to G11.
Assemble G6 and attach to the ribbon. Assemble parts G16 to G27 in the same way as the flowers for the veil, then stick them onto G15.
Assemble G28 and stick it on behind the leaf of the bouquet. Attach the bouquet to the veil and you’re finished!
Attach G7,G8,G9 and G10 and attach it to the ribbon.
Attach G11,G12,G13 and G14.