€¦  · Web viewWe sell through select dealers and distributors who share our commitment to...

42
SECTION 04 21 00 CLAY MASONRY UNITS Display hidden notes to specifier. (Don't know how? Click Here ) Copyright 2011 - 2018 ARCAT, Inc. - All rights reserved 1 GENERAL 1.1 SECTION INCLUDES 1.1.1 Clay masonry units. 1.1.2 Accessories including reinforcement, anchorage, flashing, etc. 1.2 RELATED SECTIONS 1.2.1 Section 04 05 13 - Masonry Mortaring. 1.2.2 Section 04 21 13.13 - Brick Veneer Masonry. 1.2.3 Section 04 01 00 - Maintenance of Masonry. 1.2.4 Section 05 12 13 - Architecturally-Exposed Structural Steel Framing. 1.2.5 Section 05 21 13 - Deep Longspan Steel Joist Framing. 1.2.6 Section 05 50 00 - Metal Fabrications. 1.2.7 Section 06 10 00 - Rough Carpentry. 1.2.8 Section 07 62 00 - Sheet Metal Flashing and Trim. 1.2.9 Section 07 84 13 - Penetration Firestopping. 1.2.10 Section 07 90 00 - Joint Protection. 1.2.11 Section ______-____________: Product requirements for window anchors for placement by this section. 1.2.12 Section ______-____________: Fireplace and chimney flue accessories. 1.2.13 Section _____-__________: Execution requirements for special anchors specified by this section. 04 21 00-1

Transcript of €¦  · Web viewWe sell through select dealers and distributors who share our commitment to...

SECTION 04 21 00CLAY MASONRY UNITS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2011 - 2018 ARCAT, Inc. - All rights reserved

1 GENERAL

1.1 SECTION INCLUDES

1.1.1 Clay masonry units.

1.1.2 Accessories including reinforcement, anchorage, flashing, etc.

1.2 RELATED SECTIONS

1.2.1 Section 04 05 13 - Masonry Mortaring.

1.2.2 Section 04 21 13.13 - Brick Veneer Masonry.

1.2.3 Section 04 01 00 - Maintenance of Masonry.

1.2.4 Section 05 12 13 - Architecturally-Exposed Structural Steel Framing.

1.2.5 Section 05 21 13 - Deep Longspan Steel Joist Framing.

1.2.6 Section 05 50 00 - Metal Fabrications.

1.2.7 Section 06 10 00 - Rough Carpentry.

1.2.8 Section 07 62 00 - Sheet Metal Flashing and Trim.

1.2.9 Section 07 84 13 - Penetration Firestopping.

1.2.10 Section 07 90 00 - Joint Protection.

1.2.11 Section ______-____________: Product requirements for window anchors for placement by this section.

1.2.12 Section ______-____________: Fireplace and chimney flue accessories.

1.2.13 Section _____-__________: Execution requirements for special anchors specified by this section.

1.3 REFERENCES

1.3.1 ASTM A 36 - Standard Specification for Carbon Structural Steel.

1.3.2 ASTM A 82 - Standard Specification for Steel Wire, Plain, for Concrete Reinforcement.

1.3.3 ASTM A 153/A 153M - Zinc Coating (Hot-Dip) on Iron and Steel Hardware.

04 21 00-1

1.3.4 ASTM A 615/A 615M - Standard Specification for Deformed and Plain Billet-Steel Bars for Concrete Reinforcement.

1.3.5 ASTM A 616 - Standard Specification for Rail-Steel Deformed and Plain Bars for Concrete Reinforcement.

1.3.6 ASTM A 617 - Standard Specification for Axle-Steel Deformed and Plain Bars for Concrete Reinforcement.

1.3.7 ASTM A 666 - Standard Specification for Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar.

1.3.8 ASTM A 775 - Standard Specification for Epoxy-Coated Steel Reinforcing Bars.

1.3.9 ASTM A 996 - Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement.

1.3.10 ASTM A 1008 - Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable.

1.3.11 ASTM B 370 - Standard Specification for Copper Sheet and Strip for Building Construction.

1.3.12 ASTM C 62 - Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

1.3.13 ASTM C 67 - Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile.

1.3.14 ASTM C 216 - Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale).

1.3.15 ASTM C 1261 - Standard Specification for Firebox Brick for Residential Fireplaces.

1.3.16 ASTM D 1056 - Standard Specification for Flexible Cellular Materials Sponge or Expanded Rubber.

1.3.17 ANSI A41.1 Building Code Requirements for Masonry

1.3.18 ANSI A41.2 Building Code Requirements for Reinforced Masonry

1.4 DESIGN / PERFORMANCE REQUIREMENTS

1.4.1 Work shall conform to ANSI A41.1 Building Code Requirements for Masonry, ANSI A41.2 Building Code Requirements for Reinforced Masonry or equivalent sections of the applicable Code.

1.5 SUBMITTALS

1.5.1 Submit under provisions of Section 01 30 00 - Administrative Requirements.

1.5.2 Product Data: Manufacturer's data sheets on each product to be used, including:1.5.2.1 Preparation instructions and recommendations.1.5.2.2 Storage and handling requirements and recommendations.1.5.2.3 Installation methods.

04 21 00-2

1.5.3 Verification Samples: Furnish not less than five individual brick as samples, showing extreme variations in color and texture.

1.5.4 Manufacturer's Certificates: Test reports to certify products meet or exceed specified requirements.

1.6 QUALITY ASSURANCE

1.6.1 Manufacturer Qualifications: Primary products specified in this section will be supplied by a single manufacturer with a minimum of ten years experience.

1.6.2 Installer Qualifications: Company specializing in performing Work of this section with minimum three years documented experience.

1.6.3 Mock-Up: Mock-up or sample panels shall be used to review brick and mortar color and serve as the standard of workmanship for the Project.1.6.3.1 Construct masonry wall mockup, 4 feet (1.2 m) long by 3 feet (1 m) high,

showing proposed color range, texture, bond, mortar and workmanship.1.6.3.2 Locate where directed by Architect.1.6.3.3 When required provide a separate panel for each type of brick and mortar

specified.1.6.3.4 Do not proceed with remaining work until workmanship, color and texture are

approved by Architect.1.6.3.5 Protect the panel until the Work is completed and accepted by the Architect.

1.6.4 Brick Tests:1.6.4.1 Submit brick tests sampled and tested in accordance with ASTM C 67.1.6.4.2 Test Reports:

1.6.4.2.1 Testing and reports shall be completed by an independent laboratory.1.6.4.2.2 Test reports for each type of building and facing brick shall be submitted to

the Architect/Engineer for review.1.6.4.2.3 Test reports shall indicate:

1.6.4.2.3.1 Compressive strength.1.6.4.2.3.2 24 hour cold water absorption.1.6.4.2.3.3 5-hour boil absorption.1.6.4.2.3.4 Saturation coefficient.1.6.4.2.3.5 Initial rate of absorption.1.6.4.2.3.6 Efflorescence.

1.7 ALLOWANCES

1.7.1 Include under provisions of Section 01 21 29 - Quantity Allowances.

1.7.2 Allowance includes each type of clay masonry unit included in this section. Installation is included in this section and is part of Contract Sum/Price.

1.8 DELIVERY, STORAGE, AND HANDLING

1.8.1 Store products in manufacturer's unopened packaging until ready for installation.

1.8.2 Deliver products of this section on pallets, with individual faces protected; keep dry.

1.8.3 Store brick off the ground to prevent contamination by mud, dust or other materials likely to cause staining or other defects.

1.8.4 Cover all materials with a non staining waterproof membrane material when necessary to protect from elements.

04 21 00-3

1.9 COORDINATION

1.9.1 Coordinate masonry work with installation of built-in work and adjacent construction.

1.10 PROJECT CONDITIONS

1.10.1 Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

1.10.2 Protection of Work:1.10.2.1 Wall Covering:

1.10.2.1.1 During erection, cover top of wall with strong nonstaining waterproof membrane at end of each day or shutdown.

1.10.2.1.2 Cover partially completed walls when work is not in progress.1.10.2.1.3 Extend cover minimum of 24 inches (610 mm) down both sides.1.10.2.1.4 Hold cover securely in place.

1.10.2.2 Load Applications:1.10.2.2.1 Do not apply uniform floor or roof loading for at least 12 hours after building

masonry columns or wall.1.10.2.2.2 Do not apply concentrated loads for at least 3 days after building masonry

columns or walls.1.10.2.3 Stain Prevention:

1.10.2.3.1 Prevent grout or mortar from staining the face of masonry.1.10.2.3.2 Remove immediately grout or mortar in contact with face of masonry.1.10.2.3.3 Protect all sills, ledges and projections from droppings of mortar.1.10.2.3.4 Protect base of wall from rain-splashed mud and mortar splatter.1.10.2.3.5 Scaffold boards shall be turned on edge when work is not in progress.

1.10.3 Cold Weather Protection:1.10.3.1 Preparation:

1.10.3.1.1 When ice or snow has formed on masonry bed, remove by carefully applying heat not to exceed 120 degrees F (49 degrees C) until surface is dry to the touch.

1.10.3.1.2 Remove all masonry deemed frozen or damaged.1.10.3.2 Products:

1.10.3.2.1 When brick suction exceeds 30 grams/min/30 sq. in., sprinkle with heated water:

1.10.3.2.1.1 When units are above 32 degrees F (0 degrees C), heat water above 70 degrees F (21 degrees C).

1.10.3.2.1.2 When units are below 32 degrees F (0 degrees C), heat water above 130 degrees F (54 degrees C).

1.10.3.2.2 Do not use wet or frozen units.1.10.3.3 Construction Requirements While Work is Progressing:

1.10.3.3.1 Air temperature 40 degrees F (4 degrees C) to 32 degrees F (0 degrees C):

1.10.3.3.1.1 Heat sand or mixing water to produce mortar temperatures between 40 degrees F (4 degrees C) to 32 degrees F (0 degrees C).

1.10.3.3.2 Air temperature 32 degrees F (0 degrees C) to 25 degrees F (minus 4 degrees C):

1.10.3.3.2.1 Heat sand and mixing water to produce temperatures between 40 degrees F (4 degrees C) and 120 degrees F (49 degrees C).

1.10.3.3.2.2 Maintain temperature of mortar on boards above freezing.1.10.3.3.3 Air temperatures 25 degrees F (minus 4 degrees C) to 20 degrees F

(minus 7 degrees C).1.10.3.3.3.1 Heat sand and mixing water to produce mortar temperatures

04 21 00-4

between 40 degrees F (4 degrees C) and 120 degrees F. (49 degrees C).

1.10.3.3.3.2 Maintain mortar temperatures on boards above freezing.1.10.3.3.3.3 Use approved heat sources on both sides of walls under

construction.1.10.3.3.3.4 Use windbreaks when wind is in excess of 15 mph (24 kms/h).

1.10.3.3.4 Air temperature 20 degrees F (minus 7 degrees C) and below:1.10.3.3.4.1 Heat sand and mixing water to produce mortar temperatures

between 40 degrees F (4 degrees C) and 120 degrees F (49 degrees C.).

1.10.3.3.4.2 Provide enclosures and auxiliary heat to maintain air temperature above 32 degrees F (0 degrees C).

1.10.3.3.4.3 Minimum temperature of units when laid: 20 degrees F (minus 7 degrees C).

1.10.3.3.5 Mean daily air temperature 40 degrees F (4 degrees C) to 32 degrees F (0 degrees C):

1.10.3.3.5.1 Protect masonry from rain or snow for 24 hours by covering with weather-resistive membrane.

1.10.3.3.6 Mean daily air temperature 32 degrees F (0 degrees C) to 25 degrees F (minus 4 degrees C):

1.10.3.3.6.1 Completely cover masonry with weather-resistive membrane for 24 hrs.

1.10.3.3.7 Mean daily temperature 25 degrees F (minus 4 degrees C) to 20 degrees F (minus 7 degrees C):

1.10.3.3.7.1 Completely cover masonry with insulating blankets or equal protection for 24 hours.

1.10.3.3.8 Mean daily air temperature 20 degrees F (minus 7 degrees C) and below:1.10.3.3.8.1 Maintain masonry temperature above 32 degrees F (0 degrees C)

for 24 hours by:1.10.3.3.8.1.1 Method: Enclosure and supplementary heat.1.10.3.3.8.1.2 Method: Electric heating blankets.1.10.3.3.8.1.3 Method: Infrared lamps.1.10.3.3.8.1.4 Method: Other approved methods.

1.10.4 Hot Weather Protection:1.10.4.1 When temperature exceeds 100 degrees F or 90 degrees F with 8 mph wind

(above 38 degrees C or 32 degrees C with 13 kms/h wind).1.10.4.1.1 Maintain temperature of mortar and grout between 70 degrees F and 120

degrees F (21 degrees C and 49 degrees C).1.10.4.1.1.1 Limit spread of mortar bed to 4 feet (1.2 m). Place units within 1

minute of spreading mortar.1.10.4.1.2 Partially or recently completed walls may be fog sprayed and/or covered

with opaque plastic or canvas or both to control moisture evaporation.

2 PRODUCTS

2.1 MANUFACTURERS

2.1.1 Acceptable Manufacturer: Corporate Office & Bowerston Plant, which is located at: The Bowerston Shale Company 515 E. Main Street P. O. Box 199; Bowerston, OH 44695; Tel: 740-269-2921; Fax: 740-269-5456; Email:request info ([email protected]); Web:www.bowerstonshale.com

2.1.2 Substitutions: Not permitted.

2.1.3 Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

04 21 00-5

2.2 CLAY MASONRY UNITS

2.2.1 Face Brick: Provide to the sizes colors and textures specified. Furnish special units for corners, lintels, bullnosed corners and others as indicated on the Drawings. Shaped to profile indicated and provide to color and surface texture to match face brick unless otherwise indicated.2.2.1.1 Modular Size: 3-5/8 inch Wide by 2-1/4 inch High by 7-5/8 inch Long (92.1 mm

Wide by 57.2 mm High by 193.7 mm Long).2.2.1.1.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.1.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.1.3 Colors:

2.2.1.1.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.1.3.2 #41 W/C2.2.1.1.3.3 #41 Smooth2.2.1.1.3.4 #1000 Buff Smooth Flash2.2.1.1.3.5 #1003 Buff Smooth2.2.1.1.3.6 #110 Red Smooth2.2.1.1.3.7 #1100 Red Smooth Flash2.2.1.1.3.8 #1110 Cherry Red Smooth Flash2.2.1.1.3.9 #110-3 Mahogany Smooth2.2.1.1.3.10 #110-6 Sorrel Smooth2.2.1.1.3.11 #1113 Crimson Flash Smooth2.2.1.1.3.12 #1116 Chestnut Flash Smooth2.2.1.1.3.13 #120 Red Rugg2.2.1.1.3.14 #1200 Monticello Blend2.2.1.1.3.15 #125 Cherry Bark2.2.1.1.3.16 #1252 Cardinal Blend2.2.1.1.3.17 #130 Red W/C2.2.1.1.3.18 #1300 Valley Blend2.2.1.1.3.19 #130-1 W/C2.2.1.1.3.20 #130-3 Mahogany W/C2.2.1.1.3.21 #130-6 Sorrell W/C2.2.1.1.3.22 #1303 Mahogany Flash W/C2.2.1.1.3.23 #1306 Sorrel Flash W/C2.2.1.1.3.24 #1310 Cherry Flash W/C2.2.1.1.3.25 #1348 Red Rough Tex Flash2.2.1.1.3.26 #138 Red R/T2.2.1.1.3.27 #1425 Buff Bark Flash2.2.1.1.3.28 #1445 Mission Blend2.2.1.1.3.29 #1448 Blush Buff Flash R/T2.2.1.1.3.30 #145 Red Vertex2.2.1.1.3.31 #1450 Red Vertex Flash2.2.1.1.3.32 #145-3 Mahogany Vertex2.2.1.1.3.33 #145-6 Sorrel Vertex2.2.1.1.3.34 #1520 Blush Buff Sand Face2.2.1.1.3.35 #1525 Buff Sand Face Flash2.2.1.1.3.36 #1545 Buff Vertex Flash2.2.1.1.3.37 #1546 Dark Blush Buff Vertex2.2.1.1.3.38 #1620 Red Sand Face2.2.1.1.3.39 #1625 Red Flash Sand Face2.2.1.1.3.40 #208 Smooth FR IS2.2.1.1.3.41 #225 Red Bark Flash2.2.1.1.3.42 #245 Blush Buff Rugg2.2.1.1.3.43 #300 White Birch Bark2.2.1.1.3.44 #325 Walnut Bark

04 21 00-6

2.2.1.1.3.45 #340 White W/C2.2.1.1.3.46 #340-1 W/C2.2.1.1.3.47 #345 White Vertex2.2.1.1.3.48 #360 White Rugg2.2.1.1.3.49 #425 Blush Buff Bark Blend2.2.1.1.3.50 #443 Lite Blush Buff Velvet2.2.1.1.3.51 #445 Blush Buff Velvet2.2.1.1.3.52 #446 Darker Blush Buff Velvet2.2.1.1.3.53 #501 Cordovan Velvet2.2.1.1.3.54 #510 Cordovan Smooth2.2.1.1.3.55 #520 Cordovan Sandface2.2.1.1.3.56 #525 Cordovan Rugg2.2.1.1.3.57 #545 Cordovan Vertex2.2.1.1.3.58 #610 Dark Red Smooth Iron Spot2.2.1.1.3.59 #615 Red Smooth Full Range Iron Spot2.2.1.1.3.60 #717 Dark Smooth Iron Spot2.2.1.1.3.61 #721 Dark Smooth Full Range Iron Spot2.2.1.1.3.62 #7210 Dark W/C Full Range Iron Spot2.2.1.1.3.63 #806 Gray And White Bark Blend2.2.1.1.3.64 #825 Medium Gray/Brown Bark Blend2.2.1.1.3.65 #923 Light Gray Bark2.2.1.1.3.66 #925 Gray Bark Blend2.2.1.1.3.67 #926 Dark Gray Bark2.2.1.1.3.68 49R Blend IS2.2.1.1.3.69 85/15 W/C2.2.1.1.3.70 85/15 Clear W/C2.2.1.1.3.71 938 Light Gray W/C2.2.1.1.3.72 940 Medium Gray W/C2.2.1.1.3.73 942 Dark Gray W/C2.2.1.1.3.74 938-1 Light Gray W/C2.2.1.1.3.75 940-1 Medium Gray W/C2.2.1.1.3.76 942-1 Dark Gray W/C2.2.1.1.3.77 Antique Red Flash V/M2.2.1.1.3.78 Autumn Blend Clear W/C2.2.1.1.3.79 Autumn Blend R/T2.2.1.1.3.80 Autumn Blend Smooth2.2.1.1.3.81 Autumn Blend V/M2.2.1.1.3.82 Autumn Blend W/C2.2.1.1.3.83 Autumn Rose Clear W/C2.2.1.1.3.84 Autumn Rose R/T2.2.1.1.3.85 Autumn Rose Smooth2.2.1.1.3.86 Autumn Rose V/M2.2.1.1.3.87 Autumn Rose W/C2.2.1.1.3.88 Aztec Red2.2.1.1.3.89 Bordeaux2.2.1.1.3.90 Briarcliffe2.2.1.1.3.91 Buckskin2.2.1.1.3.92 Burgundy Blend2.2.1.1.3.93 BW 50 R/T2.2.1.1.3.94 BW 50 V/M2.2.1.1.3.95 BW 50 W/C2.2.1.1.3.96 Canyon Blend R/T Full Range2.2.1.1.3.97 Canyon Blend R/T Lite Flash2.2.1.1.3.98 Canyon R/T2.2.1.1.3.99 Charcoal Gray2.2.1.1.3.100 Cherokee Blend V/M

04 21 00-7

2.2.1.1.3.101 Chocolate R/T2.2.1.1.3.102 Chocolate R/T Full Range2.2.1.1.3.103 Chocolate Smooth2.2.1.1.3.104 Chocolate Smooth Full Range2.2.1.1.3.105 Chocolate W/C2.2.1.1.3.106 Chocolate W/C Full Range2.2.1.1.3.107 Cocoa2.2.1.1.3.108 Collegiate Red Flash V/M2.2.1.1.3.109 Colonial Brown2.2.1.1.3.110 Dark Red Flash W/C NB2.2.1.1.3.111 Dark Red Flash Smooth NB2.2.1.1.3.112 Dark Red Flash Bark2.2.1.1.3.113 Dark Red Flash V/M2.2.1.1.3.114 Dark Red Smooth2.2.1.1.3.115 Desert Brown Smooth2.2.1.1.3.116 Desert Brown Flash Smooth2.2.1.1.3.117 Desert Brown W/C2.2.1.1.3.118 Desert Brown Flash W/C2.2.1.1.3.119 Desert Sage Smooth2.2.1.1.3.120 Desert Sage W/C2.2.1.1.3.121 Desert Sage Flash W/C2.2.1.1.3.122 Desert Tan Smooth2.2.1.1.3.123 Desert Tan Velvet2.2.1.1.3.124 Eau Claire2.2.1.1.3.125 Frisco Blend2.2.1.1.3.126 Harrison Range2.2.1.1.3.127 Harvest Blend2.2.1.1.3.128 Hoosier Blend2.2.1.1.3.129 Irish Gold2.2.1.1.3.130 Knox Blend2.2.1.1.3.131 Latrobe Blend W/C2.2.1.1.3.132 Lite Chocolate FL V/M (W.B.)2.2.1.1.3.133 Mohican Blend2.2.1.1.3.134 Monroe Blend2.2.1.1.3.135 Old English2.2.1.1.3.136 Olde Cheyenne2.2.1.1.3.137 Olde Harvard Smooth2.2.1.1.3.138 Olde Windsor2.2.1.1.3.139 Patent Black W/C2.2.1.1.3.140 Phoenix Red2.2.1.1.3.141 Pioneer Blend Smooth2.2.1.1.3.142 Pioneer Blend W/C2.2.1.1.3.143 Pioneer Blend W/C IS2.2.1.1.3.144 Pioneer W/C2.2.1.1.3.145 Red Bark Full Range2.2.1.1.3.146 Red Brush-Tex2.2.1.1.3.147 Red Brush-Tex Flash2.2.1.1.3.148 Red Smooth2.2.1.1.3.149 Red Smooth Full Range2.2.1.1.3.150 Red Smooth Iron Spot2.2.1.1.3.151 Red V/M2.2.1.1.3.152 Red V/M Full Range2.2.1.1.3.153 Red W/C Full Range2.2.1.1.3.154 Rose Mist2.2.1.1.3.155 Rustic Red2.2.1.1.3.156 Santa Fe R/T

04 21 00-8

2.2.1.1.3.157 Santa Fe Smooth2.2.1.1.3.158 Santa Fe W/C2.2.1.1.3.159 Santa Fe W/C IS2.2.1.1.3.160 Sunset Clear W/C2.2.1.1.3.161 Sunset Flash R/T2.2.1.1.3.162 Sunset Flash Smooth2.2.1.1.3.163 Sunset Flash V/M2.2.1.1.3.164 Sunset Flash W/C2.2.1.1.3.165 Terra Cotta Bark2.2.1.1.3.166 Terra Cotta Red R/T2.2.1.1.3.167 Terra Cotta Red V/M2.2.1.1.3.168 Terra Cotta Red W/C2.2.1.1.3.169 University Blend Smooth2.2.1.1.3.170 University Blend Smooth Iron Spot2.2.1.1.3.171 University Blend V/M2.2.1.1.3.172 University Blend W/C2.2.1.1.3.173 University Blend W/C Iron Spot2.2.1.1.3.174 Woodsfield Blend

2.2.1.2 Standard Size: 3-/5/8 inch Wide by 2-1/4 inch High by 8 inch (Long 92.1 mm Wide by 57.2 mm High by 203 mm Long).

2.2.1.2.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.2.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.2.3 Colors:

2.2.1.2.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.2.3.2 #41 W/C2.2.1.2.3.3 #41 Smooth2.2.1.2.3.4 #1000 Buff Smooth Flash2.2.1.2.3.5 #1003 Buff Smooth2.2.1.2.3.6 #110 Red Smooth2.2.1.2.3.7 #1100 Red Smooth Flash2.2.1.2.3.8 #1110 Cherry Red Smooth Flash2.2.1.2.3.9 #110-3 Mahogany Smooth2.2.1.2.3.10 #110-6 Sorrel Smooth2.2.1.2.3.11 #1113 Crimson Flash Smooth2.2.1.2.3.12 #1116 Chestnut Flash Smooth2.2.1.2.3.13 #120 Red Rugg2.2.1.2.3.14 #1200 Monticello Blend2.2.1.2.3.15 #125 Cherry Bark2.2.1.2.3.16 #1252 Cardinal Blend2.2.1.2.3.17 #130 Red W/C2.2.1.2.3.18 #1300 Valley Blend2.2.1.2.3.19 #130-1 W/C2.2.1.2.3.20 #130-3 Mahogany W/C2.2.1.2.3.21 #130-6 Sorrell W/C2.2.1.2.3.22 #1303 Mahogany Flash W/C2.2.1.2.3.23 #1306 Sorrel Flash W/C2.2.1.2.3.24 #1310 Cherry Flash W/C2.2.1.2.3.25 #1348 Red Rough Tex Flash2.2.1.2.3.26 #138 Red R/T2.2.1.2.3.27 #1425 Buff Bark Flash2.2.1.2.3.28 #1445 Mission Blend2.2.1.2.3.29 #1448 Blush Buff Flash R/T2.2.1.2.3.30 #145 Red Vertex2.2.1.2.3.31 #1450 Red Vertex Flash2.2.1.2.3.32 #145-3 Mahogany Vertex

04 21 00-9

2.2.1.2.3.33 #145-6 Sorrel Vertex2.2.1.2.3.34 #1520 Blush Buff Sand Face2.2.1.2.3.35 #1525 Buff Sand Face Flash2.2.1.2.3.36 #1545 Buff Vertex Flash2.2.1.2.3.37 #1546 Dark Blush Buff Vertex2.2.1.2.3.38 #1620 Red Sand Face2.2.1.2.3.39 #1625 Red Flash Sand Face2.2.1.2.3.40 #208 Smooth FR IS2.2.1.2.3.41 #225 Red Bark Flash2.2.1.2.3.42 #245 Blush Buff Rugg2.2.1.2.3.43 #300 White Birch Bark2.2.1.2.3.44 #325 Walnut Bark2.2.1.2.3.45 #340 White W/C2.2.1.2.3.46 #340-1 W/C2.2.1.2.3.47 #345 White Vertex2.2.1.2.3.48 #360 White Rugg2.2.1.2.3.49 #425 Blush Buff Bark Blend2.2.1.2.3.50 #443 Lite Blush Buff Velvet2.2.1.2.3.51 #445 Blush Buff Velvet2.2.1.2.3.52 #446 Darker Blush Buff Velvet2.2.1.2.3.53 #501 Cordovan Velvet2.2.1.2.3.54 #510 Cordovan Smooth2.2.1.2.3.55 #520 Cordovan Sandface2.2.1.2.3.56 #525 Cordovan Rugg2.2.1.2.3.57 #545 Cordovan Vertex2.2.1.2.3.58 #610 Dark Red Smooth Iron Spot2.2.1.2.3.59 #615 Red Smooth Full Range Iron Spot2.2.1.2.3.60 #717 Dark Smooth Iron Spot2.2.1.2.3.61 #721 Dark Smooth Full Range Iron Spot2.2.1.2.3.62 #7210 Dark W/C Full Range Iron Spot2.2.1.2.3.63 #806 Gray And White Bark Blend2.2.1.2.3.64 #825 Medium Gray/Brown Bark Blend2.2.1.2.3.65 #923 Light Gray Bark2.2.1.2.3.66 #925 Gray Bark Blend2.2.1.2.3.67 #926 Dark Gray Bark2.2.1.2.3.68 49R Blend IS2.2.1.2.3.69 85/15 W/C2.2.1.2.3.70 85/15 Clear W/C2.2.1.2.3.71 938 Light Gray W/C2.2.1.2.3.72 940 Medium Gray W/C2.2.1.2.3.73 942 Dark Gray W/C2.2.1.2.3.74 938-1 Light Gray W/C2.2.1.2.3.75 940-1 Medium Gray W/C2.2.1.2.3.76 942-1 Dark Gray W/C2.2.1.2.3.77 Antique Red Flash V/M2.2.1.2.3.78 Autumn Blend Clear W/C2.2.1.2.3.79 Autumn Blend R/T2.2.1.2.3.80 Autumn Blend Smooth2.2.1.2.3.81 Autumn Blend V/M2.2.1.2.3.82 Autumn Blend W/C2.2.1.2.3.83 Autumn Rose Clear W/C2.2.1.2.3.84 Autumn Rose R/T2.2.1.2.3.85 Autumn Rose Smooth2.2.1.2.3.86 Autumn Rose V/M2.2.1.2.3.87 Autumn Rose W/C2.2.1.2.3.88 Aztec Red

04 21 00-10

2.2.1.2.3.89 Bordeaux2.2.1.2.3.90 Briarcliffe2.2.1.2.3.91 Buckskin2.2.1.2.3.92 Burgundy Blend2.2.1.2.3.93 BW 50 R/T2.2.1.2.3.94 BW 50 V/M2.2.1.2.3.95 BW 50 W/C2.2.1.2.3.96 Canyon Blend R/T Full Range2.2.1.2.3.97 Canyon Blend R/T Lite Flash2.2.1.2.3.98 Canyon R/T2.2.1.2.3.99 Charcoal Gray2.2.1.2.3.100 Cherokee Blend V/M2.2.1.2.3.101 Chocolate R/T2.2.1.2.3.102 Chocolate R/T Full Range2.2.1.2.3.103 Chocolate Smooth2.2.1.2.3.104 Chocolate Smooth Full Range2.2.1.2.3.105 Chocolate W/C2.2.1.2.3.106 Chocolate W/C Full Range2.2.1.2.3.107 Cocoa2.2.1.2.3.108 Collegiate Red Flash V/M2.2.1.2.3.109 Colonial Brown2.2.1.2.3.110 Dark Red Flash W/C NB2.2.1.2.3.111 Dark Red Flash Smooth NB2.2.1.2.3.112 Dark Red Flash Bark2.2.1.2.3.113 Dark Red Flash V/M2.2.1.2.3.114 Dark Red Smooth2.2.1.2.3.115 Desert Brown Smooth2.2.1.2.3.116 Desert Brown Flash Smooth2.2.1.2.3.117 Desert Brown W/C2.2.1.2.3.118 Desert Brown Flash W/C2.2.1.2.3.119 Desert Sage Smooth2.2.1.2.3.120 Desert Sage W/C2.2.1.2.3.121 Desert Sage Flash W/C2.2.1.2.3.122 Desert Tan Smooth2.2.1.2.3.123 Desert Tan Velvet2.2.1.2.3.124 Eau Claire2.2.1.2.3.125 Frisco Blend2.2.1.2.3.126 Harrison Range2.2.1.2.3.127 Harvest Blend2.2.1.2.3.128 Hoosier Blend2.2.1.2.3.129 Irish Gold2.2.1.2.3.130 Knox Blend2.2.1.2.3.131 Latrobe Blend W/C2.2.1.2.3.132 Lite Chocolate FL V/M (W.B.)2.2.1.2.3.133 Mohican Blend2.2.1.2.3.134 Monroe Blend2.2.1.2.3.135 Old English2.2.1.2.3.136 Olde Cheyenne2.2.1.2.3.137 Olde Harvard Smooth2.2.1.2.3.138 Olde Windsor2.2.1.2.3.139 Patent Black W/C2.2.1.2.3.140 Phoenix Red2.2.1.2.3.141 Pioneer Blend Smooth2.2.1.2.3.142 Pioneer Blend W/C2.2.1.2.3.143 Pioneer Blend W/C IS2.2.1.2.3.144 Pioneer W/C

04 21 00-11

2.2.1.2.3.145 Red Bark Full Range2.2.1.2.3.146 Red Brush-Tex2.2.1.2.3.147 Red Brush-Tex Flash2.2.1.2.3.148 Red Smooth2.2.1.2.3.149 Red Smooth Full Range2.2.1.2.3.150 Red Smooth Iron Spot2.2.1.2.3.151 Red V/M2.2.1.2.3.152 Red V/M Full Range2.2.1.2.3.153 Red W/C Full Range2.2.1.2.3.154 Rose Mist2.2.1.2.3.155 Rustic Red2.2.1.2.3.156 Santa Fe R/T2.2.1.2.3.157 Santa Fe Smooth2.2.1.2.3.158 Santa Fe W/C2.2.1.2.3.159 Santa Fe W/C IS2.2.1.2.3.160 Sunset Clear W/C2.2.1.2.3.161 Sunset Flash R/T2.2.1.2.3.162 Sunset Flash Smooth2.2.1.2.3.163 Sunset Flash V/M2.2.1.2.3.164 Sunset Flash W/C2.2.1.2.3.165 Terra Cotta Bark2.2.1.2.3.166 Terra Cotta Red R/T2.2.1.2.3.167 Terra Cotta Red V/M2.2.1.2.3.168 Terra Cotta Red W/C2.2.1.2.3.169 University Blend Smooth2.2.1.2.3.170 University Blend Smooth Iron Spot2.2.1.2.3.171 University Blend V/M2.2.1.2.3.172 University Blend W/C2.2.1.2.3.173 University Blend W/C Iron Spot2.2.1.2.3.174 Woodsfield Blend

2.2.1.3 Engineer Size: 3-5/8 inch Wide by 2-3/4 inch High by 7-5/8 inch Long (92.1 mm Wide by 71.4 mm High by 193.7 mm Long).

2.2.1.3.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.3.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.3.3 Colors:

2.2.1.3.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.3.3.2 #41 W/C2.2.1.3.3.3 #41 Smooth2.2.1.3.3.4 #1000 Buff Smooth Flash2.2.1.3.3.5 #1003 Buff Smooth2.2.1.3.3.6 #110 Red Smooth2.2.1.3.3.7 #1100 Red Smooth Flash2.2.1.3.3.8 #1110 Cherry Red Smooth Flash2.2.1.3.3.9 #110-3 Mahogany Smooth2.2.1.3.3.10 #110-6 Sorrel Smooth2.2.1.3.3.11 #1113 Crimson Flash Smooth2.2.1.3.3.12 #1116 Chestnut Flash Smooth2.2.1.3.3.13 #120 Red Rugg2.2.1.3.3.14 #1200 Monticello Blend2.2.1.3.3.15 #125 Cherry Bark2.2.1.3.3.16 #1252 Cardinal Blend2.2.1.3.3.17 #130 Red W/C2.2.1.3.3.18 #1300 Valley Blend2.2.1.3.3.19 #130-1 W/C2.2.1.3.3.20 #130-3 Mahogany W/C

04 21 00-12

2.2.1.3.3.21 #130-6 Sorrell W/C2.2.1.3.3.22 #1303 Mahogany Flash W/C2.2.1.3.3.23 #1306 Sorrel Flash W/C2.2.1.3.3.24 #1310 Cherry Flash W/C2.2.1.3.3.25 #1348 Red Rough Tex Flash2.2.1.3.3.26 #138 Red R/T2.2.1.3.3.27 #1425 Buff Bark Flash2.2.1.3.3.28 #1445 Mission Blend2.2.1.3.3.29 #1448 Blush Buff Flash R/T2.2.1.3.3.30 #145 Red Vertex2.2.1.3.3.31 #1450 Red Vertex Flash2.2.1.3.3.32 #145-3 Mahogany Vertex2.2.1.3.3.33 #145-6 Sorrel Vertex2.2.1.3.3.34 #1520 Blush Buff Sand Face2.2.1.3.3.35 #1525 Buff Sand Face Flash2.2.1.3.3.36 #1545 Buff Vertex Flash2.2.1.3.3.37 #1546 Dark Blush Buff Vertex2.2.1.3.3.38 #1620 Red Sand Face2.2.1.3.3.39 #1625 Red Flash Sand Face2.2.1.3.3.40 #208 Smooth FR IS2.2.1.3.3.41 #225 Red Bark Flash2.2.1.3.3.42 #245 Blush Buff Rugg2.2.1.3.3.43 #300 White Birch Bark2.2.1.3.3.44 #325 Walnut Bark2.2.1.3.3.45 #340 White W/C2.2.1.3.3.46 #340-1 W/C2.2.1.3.3.47 #345 White Vertex2.2.1.3.3.48 #360 White Rugg2.2.1.3.3.49 #425 Blush Buff Bark Blend2.2.1.3.3.50 #443 Lite Blush Buff Velvet2.2.1.3.3.51 #445 Blush Buff Velvet2.2.1.3.3.52 #446 Darker Blush Buff Velvet2.2.1.3.3.53 #501 Cordovan Velvet2.2.1.3.3.54 #510 Cordovan Smooth2.2.1.3.3.55 #520 Cordovan Sandface2.2.1.3.3.56 #525 Cordovan Rugg2.2.1.3.3.57 #545 Cordovan Vertex2.2.1.3.3.58 #610 Dark Red Smooth Iron Spot2.2.1.3.3.59 #615 Red Smooth Full Range Iron Spot2.2.1.3.3.60 #717 Dark Smooth Iron Spot2.2.1.3.3.61 #721 Dark Smooth Full Range Iron Spot2.2.1.3.3.62 #7210 Dark W/C Full Range Iron Spot2.2.1.3.3.63 #806 Gray And White Bark Blend2.2.1.3.3.64 #825 Medium Gray/Brown Bark Blend2.2.1.3.3.65 #923 Light Gray Bark2.2.1.3.3.66 #925 Gray Bark Blend2.2.1.3.3.67 #926 Dark Gray Bark2.2.1.3.3.68 49R Blend IS2.2.1.3.3.69 85/15 W/C2.2.1.3.3.70 85/15 Clear W/C2.2.1.3.3.71 938 Light Gray W/C2.2.1.3.3.72 940 Medium Gray W/C2.2.1.3.3.73 942 Dark Gray W/C2.2.1.3.3.74 938-1 Light Gray W/C2.2.1.3.3.75 940-1 Medium Gray W/C2.2.1.3.3.76 942-1 Dark Gray W/C

04 21 00-13

2.2.1.3.3.77 Antique Red Flash V/M2.2.1.3.3.78 Autumn Blend Clear W/C2.2.1.3.3.79 Autumn Blend R/T2.2.1.3.3.80 Autumn Blend Smooth2.2.1.3.3.81 Autumn Blend V/M2.2.1.3.3.82 Autumn Blend W/C2.2.1.3.3.83 Autumn Rose Clear W/C2.2.1.3.3.84 Autumn Rose R/T2.2.1.3.3.85 Autumn Rose Smooth2.2.1.3.3.86 Autumn Rose V/M2.2.1.3.3.87 Autumn Rose W/C2.2.1.3.3.88 Aztec Red2.2.1.3.3.89 Bordeaux2.2.1.3.3.90 Briarcliffe2.2.1.3.3.91 Buckskin2.2.1.3.3.92 Burgundy Blend2.2.1.3.3.93 BW 50 R/T2.2.1.3.3.94 BW 50 V/M2.2.1.3.3.95 BW 50 W/C2.2.1.3.3.96 Canyon Blend R/T Full Range2.2.1.3.3.97 Canyon Blend R/T Lite Flash2.2.1.3.3.98 Canyon R/T2.2.1.3.3.99 Charcoal Gray2.2.1.3.3.100 Cherokee Blend V/M2.2.1.3.3.101 Chocolate R/T2.2.1.3.3.102 Chocolate R/T Full Range2.2.1.3.3.103 Chocolate Smooth2.2.1.3.3.104 Chocolate Smooth Full Range2.2.1.3.3.105 Chocolate W/C2.2.1.3.3.106 Chocolate W/C Full Range2.2.1.3.3.107 Cocoa2.2.1.3.3.108 Collegiate Red Flash V/M2.2.1.3.3.109 Colonial Brown2.2.1.3.3.110 Dark Red Flash W/C NB2.2.1.3.3.111 Dark Red Flash Smooth NB2.2.1.3.3.112 Dark Red Flash Bark2.2.1.3.3.113 Dark Red Flash V/M2.2.1.3.3.114 Dark Red Smooth2.2.1.3.3.115 Desert Brown Smooth2.2.1.3.3.116 Desert Brown Flash Smooth2.2.1.3.3.117 Desert Brown W/C2.2.1.3.3.118 Desert Brown Flash W/C2.2.1.3.3.119 Desert Sage Smooth2.2.1.3.3.120 Desert Sage W/C2.2.1.3.3.121 Desert Sage Flash W/C2.2.1.3.3.122 Desert Tan Smooth2.2.1.3.3.123 Desert Tan Velvet2.2.1.3.3.124 Eau Claire2.2.1.3.3.125 Frisco Blend2.2.1.3.3.126 Harrison Range2.2.1.3.3.127 Harvest Blend2.2.1.3.3.128 Hoosier Blend2.2.1.3.3.129 Irish Gold2.2.1.3.3.130 Knox Blend2.2.1.3.3.131 Latrobe Blend W/C2.2.1.3.3.132 Lite Chocolate FL V/M (W.B.)

04 21 00-14

2.2.1.3.3.133 Mohican Blend2.2.1.3.3.134 Monroe Blend2.2.1.3.3.135 Old English2.2.1.3.3.136 Olde Cheyenne2.2.1.3.3.137 Olde Harvard Smooth2.2.1.3.3.138 Olde Windsor2.2.1.3.3.139 Patent Black W/C2.2.1.3.3.140 Phoenix Red2.2.1.3.3.141 Pioneer Blend Smooth2.2.1.3.3.142 Pioneer Blend W/C2.2.1.3.3.143 Pioneer Blend W/C IS2.2.1.3.3.144 Pioneer W/C2.2.1.3.3.145 Red Bark Full Range2.2.1.3.3.146 Red Brush-Tex2.2.1.3.3.147 Red Brush-Tex Flash2.2.1.3.3.148 Red Smooth2.2.1.3.3.149 Red Smooth Full Range2.2.1.3.3.150 Red Smooth Iron Spot2.2.1.3.3.151 Red V/M2.2.1.3.3.152 Red V/M Full Range2.2.1.3.3.153 Red W/C Full Range2.2.1.3.3.154 Rose Mist2.2.1.3.3.155 Rustic Red2.2.1.3.3.156 Santa Fe R/T2.2.1.3.3.157 Santa Fe Smooth2.2.1.3.3.158 Santa Fe W/C2.2.1.3.3.159 Santa Fe W/C IS2.2.1.3.3.160 Sunset Clear W/C2.2.1.3.3.161 Sunset Flash R/T2.2.1.3.3.162 Sunset Flash Smooth2.2.1.3.3.163 Sunset Flash V/M2.2.1.3.3.164 Sunset Flash W/C2.2.1.3.3.165 Terra Cotta Bark2.2.1.3.3.166 Terra Cotta Red R/T2.2.1.3.3.167 Terra Cotta Red V/M2.2.1.3.3.168 Terra Cotta Red W/C2.2.1.3.3.169 University Blend Smooth2.2.1.3.3.170 University Blend Smooth Iron Spot2.2.1.3.3.171 University Blend V/M2.2.1.3.3.172 University Blend W/C2.2.1.3.3.173 University Blend W/C Iron Spot2.2.1.3.3.174 Woodsfield Blend

2.2.1.4 Norman Size: 3-/5/8 inch Wide by 2-1/4 inch High by 11-5/8 inch Long (92.1 mm Wide by 57.2 mm High by 295.3 mm Long).

2.2.1.4.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.4.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.4.3 Colors:

2.2.1.4.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.4.3.2 #41 W/C2.2.1.4.3.3 #41 Smooth2.2.1.4.3.4 #1000 Buff Smooth Flash2.2.1.4.3.5 #1003 Buff Smooth2.2.1.4.3.6 #110 Red Smooth2.2.1.4.3.7 #1100 Red Smooth Flash2.2.1.4.3.8 #1110 Cherry Red Smooth Flash

04 21 00-15

2.2.1.4.3.9 #110-3 Mahogany Smooth2.2.1.4.3.10 #110-6 Sorrel Smooth2.2.1.4.3.11 #1113 Crimson Flash Smooth2.2.1.4.3.12 #1116 Chestnut Flash Smooth2.2.1.4.3.13 #120 Red Rugg2.2.1.4.3.14 #1200 Monticello Blend2.2.1.4.3.15 #125 Cherry Bark2.2.1.4.3.16 #1252 Cardinal Blend2.2.1.4.3.17 #130 Red W/C2.2.1.4.3.18 #1300 Valley Blend2.2.1.4.3.19 #130-1 W/C2.2.1.4.3.20 #130-3 Mahogany W/C2.2.1.4.3.21 #130-6 Sorrell W/C2.2.1.4.3.22 #1303 Mahogany Flash W/C2.2.1.4.3.23 #1306 Sorrel Flash W/C2.2.1.4.3.24 #1310 Cherry Flash W/C2.2.1.4.3.25 #1348 Red Rough Tex Flash2.2.1.4.3.26 #138 Red R/T2.2.1.4.3.27 #1425 Buff Bark Flash2.2.1.4.3.28 #1445 Mission Blend2.2.1.4.3.29 #1448 Blush Buff Flash R/T2.2.1.4.3.30 #145 Red Vertex2.2.1.4.3.31 #1450 Red Vertex Flash2.2.1.4.3.32 #145-3 Mahogany Vertex2.2.1.4.3.33 #145-6 Sorrel Vertex2.2.1.4.3.34 #1520 Blush Buff Sand Face2.2.1.4.3.35 #1525 Buff Sand Face Flash2.2.1.4.3.36 #1545 Buff Vertex Flash2.2.1.4.3.37 #1546 Dark Blush Buff Vertex2.2.1.4.3.38 #1620 Red Sand Face2.2.1.4.3.39 #1625 Red Flash Sand Face2.2.1.4.3.40 #208 Smooth FR IS2.2.1.4.3.41 #225 Red Bark Flash2.2.1.4.3.42 #245 Blush Buff Rugg2.2.1.4.3.43 #300 White Birch Bark2.2.1.4.3.44 #325 Walnut Bark2.2.1.4.3.45 #340 White W/C2.2.1.4.3.46 #340-1 W/C2.2.1.4.3.47 #345 White Vertex2.2.1.4.3.48 #360 White Rugg2.2.1.4.3.49 #425 Blush Buff Bark Blend2.2.1.4.3.50 #443 Lite Blush Buff Velvet2.2.1.4.3.51 #445 Blush Buff Velvet2.2.1.4.3.52 #446 Darker Blush Buff Velvet2.2.1.4.3.53 #501 Cordovan Velvet2.2.1.4.3.54 #510 Cordovan Smooth2.2.1.4.3.55 #520 Cordovan Sandface2.2.1.4.3.56 #525 Cordovan Rugg2.2.1.4.3.57 #545 Cordovan Vertex2.2.1.4.3.58 #610 Dark Red Smooth Iron Spot2.2.1.4.3.59 #615 Red Smooth Full Range Iron Spot2.2.1.4.3.60 #717 Dark Smooth Iron Spot2.2.1.4.3.61 #721 Dark Smooth Full Range Iron Spot2.2.1.4.3.62 #7210 Dark W/C Full Range Iron Spot2.2.1.4.3.63 #806 Gray And White Bark Blend2.2.1.4.3.64 #825 Medium Gray/Brown Bark Blend

04 21 00-16

2.2.1.4.3.65 #923 Light Gray Bark2.2.1.4.3.66 #925 Gray Bark Blend2.2.1.4.3.67 #926 Dark Gray Bark2.2.1.4.3.68 49R Blend IS2.2.1.4.3.69 85/15 W/C2.2.1.4.3.70 85/15 Clear W/C2.2.1.4.3.71 938 Light Gray W/C2.2.1.4.3.72 940 Medium Gray W/C2.2.1.4.3.73 942 Dark Gray W/C2.2.1.4.3.74 938-1 Light Gray W/C2.2.1.4.3.75 940-1 Medium Gray W/C2.2.1.4.3.76 942-1 Dark Gray W/C2.2.1.4.3.77 Antique Red Flash V/M2.2.1.4.3.78 Autumn Blend Clear W/C2.2.1.4.3.79 Autumn Blend R/T2.2.1.4.3.80 Autumn Blend Smooth2.2.1.4.3.81 Autumn Blend V/M2.2.1.4.3.82 Autumn Blend W/C2.2.1.4.3.83 Autumn Rose Clear W/C2.2.1.4.3.84 Autumn Rose R/T2.2.1.4.3.85 Autumn Rose Smooth2.2.1.4.3.86 Autumn Rose V/M2.2.1.4.3.87 Autumn Rose W/C2.2.1.4.3.88 Aztec Red2.2.1.4.3.89 Bordeaux2.2.1.4.3.90 Briarcliffe2.2.1.4.3.91 Buckskin2.2.1.4.3.92 Burgundy Blend2.2.1.4.3.93 BW 50 R/T2.2.1.4.3.94 BW 50 V/M2.2.1.4.3.95 BW 50 W/C2.2.1.4.3.96 Canyon Blend R/T Full Range2.2.1.4.3.97 Canyon Blend R/T Lite Flash2.2.1.4.3.98 Canyon R/T2.2.1.4.3.99 Charcoal Gray2.2.1.4.3.100 Cherokee Blend V/M2.2.1.4.3.101 Chocolate R/T2.2.1.4.3.102 Chocolate R/T Full Range2.2.1.4.3.103 Chocolate Smooth2.2.1.4.3.104 Chocolate Smooth Full Range2.2.1.4.3.105 Chocolate W/C2.2.1.4.3.106 Chocolate W/C Full Range2.2.1.4.3.107 Cocoa2.2.1.4.3.108 Collegiate Red Flash V/M2.2.1.4.3.109 Colonial Brown2.2.1.4.3.110 Dark Red Flash W/C NB2.2.1.4.3.111 Dark Red Flash Smooth NB2.2.1.4.3.112 Dark Red Flash Bark2.2.1.4.3.113 Dark Red Flash V/M2.2.1.4.3.114 Dark Red Smooth2.2.1.4.3.115 Desert Brown Smooth2.2.1.4.3.116 Desert Brown Flash Smooth2.2.1.4.3.117 Desert Brown W/C2.2.1.4.3.118 Desert Brown Flash W/C2.2.1.4.3.119 Desert Sage Smooth2.2.1.4.3.120 Desert Sage W/C

04 21 00-17

2.2.1.4.3.121 Desert Sage Flash W/C2.2.1.4.3.122 Desert Tan Smooth2.2.1.4.3.123 Desert Tan Velvet2.2.1.4.3.124 Eau Claire2.2.1.4.3.125 Frisco Blend2.2.1.4.3.126 Harrison Range2.2.1.4.3.127 Harvest Blend2.2.1.4.3.128 Hoosier Blend2.2.1.4.3.129 Irish Gold2.2.1.4.3.130 Knox Blend2.2.1.4.3.131 Latrobe Blend W/C2.2.1.4.3.132 Lite Chocolate FL V/M (W.B.)2.2.1.4.3.133 Mohican Blend2.2.1.4.3.134 Monroe Blend2.2.1.4.3.135 Old English2.2.1.4.3.136 Olde Cheyenne2.2.1.4.3.137 Olde Harvard Smooth2.2.1.4.3.138 Olde Windsor2.2.1.4.3.139 Patent Black W/C2.2.1.4.3.140 Phoenix Red2.2.1.4.3.141 Pioneer Blend Smooth2.2.1.4.3.142 Pioneer Blend W/C2.2.1.4.3.143 Pioneer Blend W/C IS2.2.1.4.3.144 Pioneer W/C2.2.1.4.3.145 Red Bark Full Range2.2.1.4.3.146 Red Brush-Tex2.2.1.4.3.147 Red Brush-Tex Flash2.2.1.4.3.148 Red Smooth2.2.1.4.3.149 Red Smooth Full Range2.2.1.4.3.150 Red Smooth Iron Spot2.2.1.4.3.151 Red V/M2.2.1.4.3.152 Red V/M Full Range2.2.1.4.3.153 Red W/C Full Range2.2.1.4.3.154 Rose Mist2.2.1.4.3.155 Rustic Red2.2.1.4.3.156 Santa Fe R/T2.2.1.4.3.157 Santa Fe Smooth2.2.1.4.3.158 Santa Fe W/C2.2.1.4.3.159 Santa Fe W/C IS2.2.1.4.3.160 Sunset Clear W/C2.2.1.4.3.161 Sunset Flash R/T2.2.1.4.3.162 Sunset Flash Smooth2.2.1.4.3.163 Sunset Flash V/M2.2.1.4.3.164 Sunset Flash W/C2.2.1.4.3.165 Terra Cotta Bark2.2.1.4.3.166 Terra Cotta Red R/T2.2.1.4.3.167 Terra Cotta Red V/M2.2.1.4.3.168 Terra Cotta Red W/C2.2.1.4.3.169 University Blend Smooth2.2.1.4.3.170 University Blend Smooth Iron Spot2.2.1.4.3.171 University Blend V/M2.2.1.4.3.172 University Blend W/C2.2.1.4.3.173 University Blend W/C Iron Spot2.2.1.4.3.174 Woodsfield Blend

2.2.1.5 Norwegian Size: 3-/5/8 inch Wide by 2-3/4 inch High by 11-5/8 inch Long (92.1 mm Wide by 71.4 mm High by 295.3mm).

04 21 00-18

2.2.1.5.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.5.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.5.3 Colors:

2.2.1.5.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.5.3.2 #41 W/C2.2.1.5.3.3 #41 Smooth2.2.1.5.3.4 #1000 Buff Smooth Flash2.2.1.5.3.5 #1003 Buff Smooth2.2.1.5.3.6 #110 Red Smooth2.2.1.5.3.7 #1100 Red Smooth Flash2.2.1.5.3.8 #1110 Cherry Red Smooth Flash2.2.1.5.3.9 #110-3 Mahogany Smooth2.2.1.5.3.10 #110-6 Sorrel Smooth2.2.1.5.3.11 #1113 Crimson Flash Smooth2.2.1.5.3.12 #1116 Chestnut Flash Smooth2.2.1.5.3.13 #120 Red Rugg2.2.1.5.3.14 #1200 Monticello Blend2.2.1.5.3.15 #125 Cherry Bark2.2.1.5.3.16 #1252 Cardinal Blend2.2.1.5.3.17 #130 Red W/C2.2.1.5.3.18 #1300 Valley Blend2.2.1.5.3.19 #130-1 W/C2.2.1.5.3.20 #130-3 Mahogany W/C2.2.1.5.3.21 #130-6 Sorrell W/C2.2.1.5.3.22 #1303 Mahogany Flash W/C2.2.1.5.3.23 #1306 Sorrel Flash W/C2.2.1.5.3.24 #1310 Cherry Flash W/C2.2.1.5.3.25 #1348 Red Rough Tex Flash2.2.1.5.3.26 #138 Red R/T2.2.1.5.3.27 #1425 Buff Bark Flash2.2.1.5.3.28 #1445 Mission Blend2.2.1.5.3.29 #1448 Blush Buff Flash R/T2.2.1.5.3.30 #145 Red Vertex2.2.1.5.3.31 #1450 Red Vertex Flash2.2.1.5.3.32 #145-3 Mahogany Vertex2.2.1.5.3.33 #145-6 Sorrel Vertex2.2.1.5.3.34 #1520 Blush Buff Sand Face2.2.1.5.3.35 #1525 Buff Sand Face Flash2.2.1.5.3.36 #1545 Buff Vertex Flash2.2.1.5.3.37 #1546 Dark Blush Buff Vertex2.2.1.5.3.38 #1620 Red Sand Face2.2.1.5.3.39 #1625 Red Flash Sand Face2.2.1.5.3.40 #208 Smooth FR IS2.2.1.5.3.41 #225 Red Bark Flash2.2.1.5.3.42 #245 Blush Buff Rugg2.2.1.5.3.43 #300 White Birch Bark2.2.1.5.3.44 #325 Walnut Bark2.2.1.5.3.45 #340 White W/C2.2.1.5.3.46 #340-1 W/C2.2.1.5.3.47 #345 White Vertex2.2.1.5.3.48 #360 White Rugg2.2.1.5.3.49 #425 Blush Buff Bark Blend2.2.1.5.3.50 #443 Lite Blush Buff Velvet2.2.1.5.3.51 #445 Blush Buff Velvet2.2.1.5.3.52 #446 Darker Blush Buff Velvet

04 21 00-19

2.2.1.5.3.53 #501 Cordovan Velvet2.2.1.5.3.54 #510 Cordovan Smooth2.2.1.5.3.55 #520 Cordovan Sandface2.2.1.5.3.56 #525 Cordovan Rugg2.2.1.5.3.57 #545 Cordovan Vertex2.2.1.5.3.58 #610 Dark Red Smooth Iron Spot2.2.1.5.3.59 #615 Red Smooth Full Range Iron Spot2.2.1.5.3.60 #717 Dark Smooth Iron Spot2.2.1.5.3.61 #721 Dark Smooth Full Range Iron Spot2.2.1.5.3.62 #7210 Dark W/C Full Range Iron Spot2.2.1.5.3.63 #806 Gray And White Bark Blend2.2.1.5.3.64 #825 Medium Gray/Brown Bark Blend2.2.1.5.3.65 #923 Light Gray Bark2.2.1.5.3.66 #925 Gray Bark Blend2.2.1.5.3.67 #926 Dark Gray Bark2.2.1.5.3.68 49R Blend IS2.2.1.5.3.69 85/15 W/C2.2.1.5.3.70 85/15 Clear W/C2.2.1.5.3.71 938 Light Gray W/C2.2.1.5.3.72 940 Medium Gray W/C2.2.1.5.3.73 942 Dark Gray W/C2.2.1.5.3.74 938-1 Light Gray W/C2.2.1.5.3.75 940-1 Medium Gray W/C2.2.1.5.3.76 942-1 Dark Gray W/C2.2.1.5.3.77 Antique Red Flash V/M2.2.1.5.3.78 Autumn Blend Clear W/C2.2.1.5.3.79 Autumn Blend R/T2.2.1.5.3.80 Autumn Blend Smooth2.2.1.5.3.81 Autumn Blend V/M2.2.1.5.3.82 Autumn Blend W/C2.2.1.5.3.83 Autumn Rose Clear W/C2.2.1.5.3.84 Autumn Rose R/T2.2.1.5.3.85 Autumn Rose Smooth2.2.1.5.3.86 Autumn Rose V/M2.2.1.5.3.87 Autumn Rose W/C2.2.1.5.3.88 Aztec Red2.2.1.5.3.89 Bordeaux2.2.1.5.3.90 Briarcliffe2.2.1.5.3.91 Buckskin2.2.1.5.3.92 Burgundy Blend2.2.1.5.3.93 BW 50 R/T2.2.1.5.3.94 BW 50 V/M2.2.1.5.3.95 BW 50 W/C2.2.1.5.3.96 Canyon Blend R/T Full Range2.2.1.5.3.97 Canyon Blend R/T Lite Flash2.2.1.5.3.98 Canyon R/T2.2.1.5.3.99 Charcoal Gray2.2.1.5.3.100 Cherokee Blend V/M2.2.1.5.3.101 Chocolate R/T2.2.1.5.3.102 Chocolate R/T Full Range2.2.1.5.3.103 Chocolate Smooth2.2.1.5.3.104 Chocolate Smooth Full Range2.2.1.5.3.105 Chocolate W/C2.2.1.5.3.106 Chocolate W/C Full Range2.2.1.5.3.107 Cocoa2.2.1.5.3.108 Collegiate Red Flash V/M

04 21 00-20

2.2.1.5.3.109 Colonial Brown2.2.1.5.3.110 Dark Red Flash W/C NB2.2.1.5.3.111 Dark Red Flash Smooth NB2.2.1.5.3.112 Dark Red Flash Bark2.2.1.5.3.113 Dark Red Flash V/M2.2.1.5.3.114 Dark Red Smooth2.2.1.5.3.115 Desert Brown Smooth2.2.1.5.3.116 Desert Brown Flash Smooth2.2.1.5.3.117 Desert Brown W/C2.2.1.5.3.118 Desert Brown Flash W/C2.2.1.5.3.119 Desert Sage Smooth2.2.1.5.3.120 Desert Sage W/C2.2.1.5.3.121 Desert Sage Flash W/C2.2.1.5.3.122 Desert Tan Smooth2.2.1.5.3.123 Desert Tan Velvet2.2.1.5.3.124 Eau Claire2.2.1.5.3.125 Frisco Blend2.2.1.5.3.126 Harrison Range2.2.1.5.3.127 Harvest Blend2.2.1.5.3.128 Hoosier Blend2.2.1.5.3.129 Irish Gold2.2.1.5.3.130 Knox Blend2.2.1.5.3.131 Latrobe Blend W/C2.2.1.5.3.132 Lite Chocolate FL V/M (W.B.)2.2.1.5.3.133 Mohican Blend2.2.1.5.3.134 Monroe Blend2.2.1.5.3.135 Old English2.2.1.5.3.136 Olde Cheyenne2.2.1.5.3.137 Olde Harvard Smooth2.2.1.5.3.138 Olde Windsor2.2.1.5.3.139 Patent Black W/C2.2.1.5.3.140 Phoenix Red2.2.1.5.3.141 Pioneer Blend Smooth2.2.1.5.3.142 Pioneer Blend W/C2.2.1.5.3.143 Pioneer Blend W/C IS2.2.1.5.3.144 Pioneer W/C2.2.1.5.3.145 Red Bark Full Range2.2.1.5.3.146 Red Brush-Tex2.2.1.5.3.147 Red Brush-Tex Flash2.2.1.5.3.148 Red Smooth2.2.1.5.3.149 Red Smooth Full Range2.2.1.5.3.150 Red Smooth Iron Spot2.2.1.5.3.151 Red V/M2.2.1.5.3.152 Red V/M Full Range2.2.1.5.3.153 Red W/C Full Range2.2.1.5.3.154 Rose Mist2.2.1.5.3.155 Rustic Red2.2.1.5.3.156 Santa Fe R/T2.2.1.5.3.157 Santa Fe Smooth2.2.1.5.3.158 Santa Fe W/C2.2.1.5.3.159 Santa Fe W/C IS2.2.1.5.3.160 Sunset Clear W/C2.2.1.5.3.161 Sunset Flash R/T2.2.1.5.3.162 Sunset Flash Smooth2.2.1.5.3.163 Sunset Flash V/M2.2.1.5.3.164 Sunset Flash W/C

04 21 00-21

2.2.1.5.3.165 Terra Cotta Bark2.2.1.5.3.166 Terra Cotta Red R/T2.2.1.5.3.167 Terra Cotta Red V/M2.2.1.5.3.168 Terra Cotta Red W/C2.2.1.5.3.169 University Blend Smooth2.2.1.5.3.170 University Blend Smooth Iron Spot2.2.1.5.3.171 University Blend V/M2.2.1.5.3.172 University Blend W/C2.2.1.5.3.173 University Blend W/C Iron Spot2.2.1.5.3.174 Woodsfield Blend

2.2.1.6 Closure/Econo Size: 3-5/8 inch Wide by 3-5/8 inch High by 7-5/8 inch Long (92.1 mm Wide by 92.1 mm High by 193.7 mm Long).

2.2.1.6.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.6.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.6.3 Colors:

2.2.1.6.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.6.3.2 #41 W/C2.2.1.6.3.3 #41 Smooth2.2.1.6.3.4 #120 Red Rugg2.2.1.6.3.5 #1200 Monticello Blend2.2.1.6.3.6 #125 Cherry Bark2.2.1.6.3.7 #1252 Cardinal Blend2.2.1.6.3.8 #130 Red W/C2.2.1.6.3.9 #1300 Valley Blend2.2.1.6.3.10 #130-1 W/C2.2.1.6.3.11 #130-3 Mahogany W/C2.2.1.6.3.12 #130-6 Sorrell W/C2.2.1.6.3.13 #1303 Mahogany Flash W/C2.2.1.6.3.14 #1306 Sorrel Flash W/C2.2.1.6.3.15 #1310 Cherry Flash W/C2.2.1.6.3.16 #1348 Red Rough Tex Flash2.2.1.6.3.17 #138 Red R/T2.2.1.6.3.18 #1425 Buff Bark Flash2.2.1.6.3.19 #1445 Mission Blend2.2.1.6.3.20 #1448 Blush Buff Flash R/T2.2.1.6.3.21 #145 Red Vertex2.2.1.6.3.22 #1450 Red Vertex Flash2.2.1.6.3.23 #145-3 Mahogany Vertex2.2.1.6.3.24 #145-6 Sorrel Vertex2.2.1.6.3.25 #1520 Blush Buff Sand Face2.2.1.6.3.26 #1525 Buff Sand Face Flash2.2.1.6.3.27 #1545 Buff Vertex Flash2.2.1.6.3.28 #1546 Dark Blush Buff Vertex2.2.1.6.3.29 #1620 Red Sand Face2.2.1.6.3.30 #1625 Red Flash Sand Face2.2.1.6.3.31 #208 Smooth FR IS2.2.1.6.3.32 #225 Red Bark Flash2.2.1.6.3.33 #245 Blush Buff Rugg2.2.1.6.3.34 #300 White Birch Bark2.2.1.6.3.35 #325 Walnut Bark2.2.1.6.3.36 #340 White W/C2.2.1.6.3.37 #340-1 W/C2.2.1.6.3.38 #345 White Vertex2.2.1.6.3.39 #360 White Rugg2.2.1.6.3.40 #425 Blush Buff Bark Blend

04 21 00-22

2.2.1.6.3.41 #443 Lite Blush Buff W/C2.2.1.6.3.42 #445 Blush Buff W/C2.2.1.6.3.43 #446 Darker Blush Buff Velvet2.2.1.6.3.44 #501 Cordovan W/C2.2.1.6.3.45 #520 Cordovan Sandface2.2.1.6.3.46 #525 Cordovan Rugg2.2.1.6.3.47 #545 Cordovan Vertex2.2.1.6.3.48 #610 Dark Red Smooth Iron Spot2.2.1.6.3.49 #615 Red Smooth Full Range Iron Spot2.2.1.6.3.50 #717 Dark Smooth Iron Spot2.2.1.6.3.51 #721 Dark Smooth Full Range Iron Spot2.2.1.6.3.52 #7210 Dark W/C Full Range Iron Spot2.2.1.6.3.53 #806 Gray And White Bark Blend2.2.1.6.3.54 #825 Medium Gray/Brown Bark Blend2.2.1.6.3.55 #923 Light Gray Bark2.2.1.6.3.56 #925 Gray Bark Blend2.2.1.6.3.57 #926 Dark Gray Bark2.2.1.6.3.58 49R Blend IS2.2.1.6.3.59 85/15 W/C2.2.1.6.3.60 85/15 Clear W/C2.2.1.6.3.61 938 Light Gray W/C2.2.1.6.3.62 940 Medium Gray W/C2.2.1.6.3.63 942 Dark Gray W/C2.2.1.6.3.64 938-1 Light Gray W/C2.2.1.6.3.65 940-1 Medium Gray W/C2.2.1.6.3.66 942-1 Dark Gray W/C2.2.1.6.3.67 Antique Red Flash V/M2.2.1.6.3.68 Autumn Blend Clear W/C2.2.1.6.3.69 Autumn Blend R/T2.2.1.6.3.70 Autumn Blend Smooth2.2.1.6.3.71 Autumn Blend V/M2.2.1.6.3.72 Autumn Blend W/C2.2.1.6.3.73 Autumn Rose Clear W/C2.2.1.6.3.74 Autumn Rose R/T2.2.1.6.3.75 Autumn Rose Smooth2.2.1.6.3.76 Autumn Rose V/M2.2.1.6.3.77 Autumn Rose W/C2.2.1.6.3.78 Aztec Red2.2.1.6.3.79 Bordeaux2.2.1.6.3.80 Briarcliffe2.2.1.6.3.81 Buckskin2.2.1.6.3.82 Burgundy Blend2.2.1.6.3.83 BW 50 R/T2.2.1.6.3.84 BW 50 V/M2.2.1.6.3.85 BW 50 W/C2.2.1.6.3.86 Canyon Blend R/T Full Range2.2.1.6.3.87 Canyon Blend R/T Lite Flash2.2.1.6.3.88 Canyon R/T2.2.1.6.3.89 Charcoal Gray2.2.1.6.3.90 Cherokee Blend V/M2.2.1.6.3.91 Chocolate R/T2.2.1.6.3.92 Chocolate R/T Full Range2.2.1.6.3.93 Chocolate Smooth2.2.1.6.3.94 Chocolate Smooth Full Range2.2.1.6.3.95 Chocolate W/C2.2.1.6.3.96 Chocolate W/C Full Range

04 21 00-23

2.2.1.6.3.97 Cocoa2.2.1.6.3.98 Collegiate Red Flash V/M2.2.1.6.3.99 Colonial Brown2.2.1.6.3.100 Dark Red Flash W/C NB2.2.1.6.3.101 Dark Red Flash Smooth NB2.2.1.6.3.102 Dark Red Flash Bark2.2.1.6.3.103 Dark Red Flash V/M2.2.1.6.3.104 Dark Red Smooth2.2.1.6.3.105 Desert Brown Smooth2.2.1.6.3.106 Desert Brown Flash Smooth2.2.1.6.3.107 Desert Brown W/C2.2.1.6.3.108 Desert Brown Flash W/C2.2.1.6.3.109 Desert Sage Smooth2.2.1.6.3.110 Desert Sage W/C2.2.1.6.3.111 Desert Sage Flash W/C2.2.1.6.3.112 Desert Tan Smooth2.2.1.6.3.113 Desert Tan Velvet2.2.1.6.3.114 Eau Claire2.2.1.6.3.115 Frisco Blend2.2.1.6.3.116 Harrison Range2.2.1.6.3.117 Harvest Blend2.2.1.6.3.118 Hoosier Blend2.2.1.6.3.119 Irish Gold2.2.1.6.3.120 Knox Blend2.2.1.6.3.121 Latrobe Blend W/C2.2.1.6.3.122 Lite Chocolate FL V/M (W.B.)2.2.1.6.3.123 Mohican Blend2.2.1.6.3.124 Monroe Blend2.2.1.6.3.125 Old English2.2.1.6.3.126 Olde Cheyenne2.2.1.6.3.127 Olde Harvard Smooth2.2.1.6.3.128 Olde Windsor2.2.1.6.3.129 Patent Black W/C2.2.1.6.3.130 Phoenix Red2.2.1.6.3.131 Pioneer Blend Smooth2.2.1.6.3.132 Pioneer Blend W/C2.2.1.6.3.133 Pioneer Blend W/C IS2.2.1.6.3.134 Pioneer W/C2.2.1.6.3.135 Red Bark Full Range2.2.1.6.3.136 Red Brush-Tex2.2.1.6.3.137 Red Brush-Tex Flash2.2.1.6.3.138 Red Smooth2.2.1.6.3.139 Red Smooth Full Range2.2.1.6.3.140 Red Smooth Iron Spot2.2.1.6.3.141 Red V/M2.2.1.6.3.142 Red V/M Full Range2.2.1.6.3.143 Red W/C Full Range2.2.1.6.3.144 Rose Mist2.2.1.6.3.145 Rustic Red2.2.1.6.3.146 Santa Fe R/T2.2.1.6.3.147 Santa Fe Smooth2.2.1.6.3.148 Santa Fe W/C2.2.1.6.3.149 Santa Fe W/C IS2.2.1.6.3.150 Sunset Clear W/C2.2.1.6.3.151 Sunset Flash R/T2.2.1.6.3.152 Sunset Flash Smooth

04 21 00-24

2.2.1.6.3.153 Sunset Flash V/M2.2.1.6.3.154 Sunset Flash W/C2.2.1.6.3.155 Terra Cotta Bark2.2.1.6.3.156 Terra Cotta Red R/T2.2.1.6.3.157 Terra Cotta Red V/M2.2.1.6.3.158 Terra Cotta Red W/C2.2.1.6.3.159 University Blend Smooth2.2.1.6.3.160 University Blend Smooth Iron Spot2.2.1.6.3.161 University Blend V/M2.2.1.6.3.162 University Blend W/C2.2.1.6.3.163 University Blend W/C Iron Spot2.2.1.6.3.164 Woodsfield Blend

2.2.1.7 Utility Size: 3-5/8 inch Wide by 3-5/8 inch High by 11-5/8 inch Long (92.1 mm Wide by 92.1 mm High by 295.3 mm Long).

2.2.1.7.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.7.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.7.3 Colors:

2.2.1.7.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.7.3.2 #41 W/C2.2.1.7.3.3 #41 Smooth2.2.1.7.3.4 #120 Red Rugg2.2.1.7.3.5 #1200 Monticello Blend2.2.1.7.3.6 #125 Cherry Bark2.2.1.7.3.7 #1252 Cardinal Blend2.2.1.7.3.8 #130 Red W/C2.2.1.7.3.9 #1300 Valley Blend2.2.1.7.3.10 #130-1 W/C2.2.1.7.3.11 #130-3 Mahogany W/C2.2.1.7.3.12 #130-6 Sorrell W/C2.2.1.7.3.13 #1303 Mahogany Flash W/C2.2.1.7.3.14 #1306 Sorrel Flash W/C2.2.1.7.3.15 #1310 Cherry Flash W/C2.2.1.7.3.16 #1348 Red Rough Tex Flash2.2.1.7.3.17 #138 Red R/T2.2.1.7.3.18 #1425 Buff Bark Flash2.2.1.7.3.19 #1445 Mission Blend2.2.1.7.3.20 #1448 Blush Buff Flash R/T2.2.1.7.3.21 #145 Red Vertex2.2.1.7.3.22 #1450 Red Vertex Flash2.2.1.7.3.23 #145-3 Mahogany Vertex2.2.1.7.3.24 #145-6 Sorrel Vertex2.2.1.7.3.25 #1520 Blush Buff Sand Face2.2.1.7.3.26 #1525 Buff Sand Face Flash2.2.1.7.3.27 #1545 Buff Vertex Flash2.2.1.7.3.28 #1546 Dark Blush Buff Vertex2.2.1.7.3.29 #1620 Red Sand Face2.2.1.7.3.30 #1625 Red Flash Sand Face2.2.1.7.3.31 #208 Smooth FR IS2.2.1.7.3.32 #225 Red Bark Flash2.2.1.7.3.33 #245 Blush Buff Rugg2.2.1.7.3.34 #300 White Birch Bark2.2.1.7.3.35 #325 Walnut Bark2.2.1.7.3.36 #340 White W/C2.2.1.7.3.37 #340-1 W/C2.2.1.7.3.38 #345 White Vertex

04 21 00-25

2.2.1.7.3.39 #360 White Rugg2.2.1.7.3.40 #425 Blush Buff Bark Blend2.2.1.7.3.41 #443 Lite Blush Buff W/C2.2.1.7.3.42 #445 Blush Buff W/C2.2.1.7.3.43 #446 Darker Blush Buff Velvet2.2.1.7.3.44 #501 Cordovan W/C2.2.1.7.3.45 #520 Cordovan Sandface2.2.1.7.3.46 #525 Cordovan Rugg2.2.1.7.3.47 #545 Cordovan Vertex2.2.1.7.3.48 #610 Dark Red Smooth Iron Spot2.2.1.7.3.49 #615 Red Smooth Full Range Iron Spot2.2.1.7.3.50 #717 Dark Smooth Iron Spot2.2.1.7.3.51 #721 Dark Smooth Full Range Iron Spot2.2.1.7.3.52 #7210 Dark W/C Full Range Iron Spot2.2.1.7.3.53 #806 Gray And White Bark Blend2.2.1.7.3.54 #825 Medium Gray/Brown Bark Blend2.2.1.7.3.55 #923 Light Gray Bark2.2.1.7.3.56 #925 Gray Bark Blend2.2.1.7.3.57 #926 Dark Gray Bark2.2.1.7.3.58 49R Blend IS2.2.1.7.3.59 85/15 W/C2.2.1.7.3.60 85/15 Clear W/C2.2.1.7.3.61 938 Light Gray W/C2.2.1.7.3.62 940 Medium Gray W/C2.2.1.7.3.63 942 Dark Gray W/C2.2.1.7.3.64 938-1 Light Gray W/C2.2.1.7.3.65 940-1 Medium Gray W/C2.2.1.7.3.66 942-1 Dark Gray W/C2.2.1.7.3.67 Antique Red Flash V/M2.2.1.7.3.68 Autumn Blend Clear W/C2.2.1.7.3.69 Autumn Blend R/T2.2.1.7.3.70 Autumn Blend Smooth2.2.1.7.3.71 Autumn Blend V/M2.2.1.7.3.72 Autumn Blend W/C2.2.1.7.3.73 Autumn Rose Clear W/C2.2.1.7.3.74 Autumn Rose R/T2.2.1.7.3.75 Autumn Rose Smooth2.2.1.7.3.76 Autumn Rose V/M2.2.1.7.3.77 Autumn Rose W/C2.2.1.7.3.78 Aztec Red2.2.1.7.3.79 Bordeaux2.2.1.7.3.80 Briarcliffe2.2.1.7.3.81 Buckskin2.2.1.7.3.82 Burgundy Blend2.2.1.7.3.83 BW 50 R/T2.2.1.7.3.84 BW 50 V/M2.2.1.7.3.85 BW 50 W/C2.2.1.7.3.86 Canyon Blend R/T Full Range2.2.1.7.3.87 Canyon Blend R/T Lite Flash2.2.1.7.3.88 Canyon R/T2.2.1.7.3.89 Charcoal Gray2.2.1.7.3.90 Cherokee Blend V/M2.2.1.7.3.91 Chocolate R/T2.2.1.7.3.92 Chocolate R/T Full Range2.2.1.7.3.93 Chocolate Smooth2.2.1.7.3.94 Chocolate Smooth Full Range

04 21 00-26

2.2.1.7.3.95 Chocolate W/C2.2.1.7.3.96 Chocolate W/C Full Range2.2.1.7.3.97 Cocoa2.2.1.7.3.98 Collegiate Red Flash V/M2.2.1.7.3.99 Colonial Brown2.2.1.7.3.100 Dark Red Flash W/C NB2.2.1.7.3.101 Dark Red Flash Smooth NB2.2.1.7.3.102 Dark Red Flash Bark2.2.1.7.3.103 Dark Red Flash V/M2.2.1.7.3.104 Dark Red Smooth2.2.1.7.3.105 Desert Brown Smooth2.2.1.7.3.106 Desert Brown Flash Smooth2.2.1.7.3.107 Desert Brown W/C2.2.1.7.3.108 Desert Brown Flash W/C2.2.1.7.3.109 Desert Sage Smooth2.2.1.7.3.110 Desert Sage W/C2.2.1.7.3.111 Desert Sage Flash W/C2.2.1.7.3.112 Desert Tan Smooth2.2.1.7.3.113 Desert Tan W/C2.2.1.7.3.114 Eau Claire2.2.1.7.3.115 Frisco Blend2.2.1.7.3.116 Harrison Range2.2.1.7.3.117 Harvest Blend2.2.1.7.3.118 Hoosier Blend2.2.1.7.3.119 Irish Gold2.2.1.7.3.120 Knox Blend2.2.1.7.3.121 Latrobe Blend W/C2.2.1.7.3.122 Lite Chocolate FL V/M (W.B.)2.2.1.7.3.123 Mohican Blend2.2.1.7.3.124 Monroe Blend2.2.1.7.3.125 Old English2.2.1.7.3.126 Olde Cheyenne2.2.1.7.3.127 Olde Harvard Smooth2.2.1.7.3.128 Olde Windsor2.2.1.7.3.129 Patent Black W/C2.2.1.7.3.130 Phoenix Red2.2.1.7.3.131 Pioneer Blend Smooth2.2.1.7.3.132 Pioneer Blend W/C2.2.1.7.3.133 Pioneer Blend W/C IS2.2.1.7.3.134 Pioneer W/C2.2.1.7.3.135 Red Bark Full Range2.2.1.7.3.136 Red Brush-Tex2.2.1.7.3.137 Red Brush-Tex Flash2.2.1.7.3.138 Red Smooth2.2.1.7.3.139 Red Smooth Full Range2.2.1.7.3.140 Red Smooth Iron Spot2.2.1.7.3.141 Red V/M2.2.1.7.3.142 Red V/M Full Range2.2.1.7.3.143 Red W/C Full Range2.2.1.7.3.144 Rose Mist2.2.1.7.3.145 Rustic Red2.2.1.7.3.146 Santa Fe R/T2.2.1.7.3.147 Santa Fe Smooth2.2.1.7.3.148 Santa Fe W/C2.2.1.7.3.149 Santa Fe W/C IS2.2.1.7.3.150 Sunset Clear W/C

04 21 00-27

2.2.1.7.3.151 Sunset Flash R/T2.2.1.7.3.152 Sunset Flash Smooth2.2.1.7.3.153 Sunset Flash V/M2.2.1.7.3.154 Sunset Flash W/C2.2.1.7.3.155 Terra Cotta Bark2.2.1.7.3.156 Terra Cotta Red R/T2.2.1.7.3.157 Terra Cotta Red V/M2.2.1.7.3.158 Terra Cotta Red W/C2.2.1.7.3.159 University Blend Smooth2.2.1.7.3.160 University Blend Smooth Iron Spot2.2.1.7.3.161 University Blend V/M2.2.1.7.3.162 University Blend W/C2.2.1.7.3.163 University Blend W/C Iron Spot2.2.1.7.3.164 Woodsfield Blend

2.2.1.8 8X8 Size: 3-5/8 inch Wide by 7-5/8 inch High by 7-5/8 inch Long (92.1 mm Wide by 193.7 mm High by 193.7 mm Long).

2.2.1.8.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.8.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.8.3 Colors:

2.2.1.8.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.8.3.2 #41 W/C2.2.1.8.3.3 #41 Smooth2.2.1.8.3.4 #120 Red Rugg2.2.1.8.3.5 #1200 Monticello Blend2.2.1.8.3.6 #125 Cherry Bark2.2.1.8.3.7 #1252 Cardinal Blend2.2.1.8.3.8 #130 Red W/C2.2.1.8.3.9 #130-1 W/C2.2.1.8.3.10 #130-3 Mahogany W/C2.2.1.8.3.11 #130-6 Sorrell W/C2.2.1.8.3.12 #138 Red R/T2.2.1.8.3.13 #145 Red Vertex2.2.1.8.3.14 #145-3 Mahogany Vertex2.2.1.8.3.15 #145-6 Sorrel Vertex2.2.1.8.3.16 #1520 Blush Buff Sand Face2.2.1.8.3.17 #1546 Dark Blush Buff Vertex2.2.1.8.3.18 #1620 Red Sand Face2.2.1.8.3.19 #1625 Red Flash Sand Face2.2.1.8.3.20 #208 Smooth FR IS2.2.1.8.3.21 #245 Blush Buff Rugg2.2.1.8.3.22 #300 White Birch Bark2.2.1.8.3.23 #325 Walnut Bark2.2.1.8.3.24 #340 White W/C2.2.1.8.3.25 #340-1 W/C2.2.1.8.3.26 #345 White Vertex2.2.1.8.3.27 #360 White Rugg2.2.1.8.3.28 #425 Blush Buff Bark Blend2.2.1.8.3.29 #443 Lite Blush Buff W/C2.2.1.8.3.30 #445 Blush Buff W/C2.2.1.8.3.31 #446 Darker Blush Buff W/C2.2.1.8.3.32 #501 Cordovan W/C2.2.1.8.3.33 #520 Cordovan Sandface2.2.1.8.3.34 #525 Cordovan Rugg2.2.1.8.3.35 #545 Cordovan Vertex2.2.1.8.3.36 #610 Dark Red Smooth Iron Spot

04 21 00-28

2.2.1.8.3.37 #615 Red Smooth Full Range Iron Spot2.2.1.8.3.38 #717 Dark Smooth Iron Spot2.2.1.8.3.39 #721 Dark Smooth Full Range Iron Spot2.2.1.8.3.40 #7210 Dark W/C Full Range Iron Spot2.2.1.8.3.41 #806 Gray And White Bark Blend2.2.1.8.3.42 #825 Medium Gray/Brown Bark Blend2.2.1.8.3.43 #923 Light Gray Bark2.2.1.8.3.44 #925 Gray Bark Blend2.2.1.8.3.45 #926 Dark Gray Bark2.2.1.8.3.46 49R Blend IS2.2.1.8.3.47 85/15 W/C2.2.1.8.3.48 85/15 Clear W/C2.2.1.8.3.49 938 Light Gray W/C2.2.1.8.3.50 940 Medium Gray W/C2.2.1.8.3.51 942 Dark Gray W/C2.2.1.8.3.52 938-1 Light Gray W/C2.2.1.8.3.53 940-1 Medium Gray W/C2.2.1.8.3.54 942-1 Dark Gray W/C2.2.1.8.3.55 Autumn Blend Clear W/C2.2.1.8.3.56 Autumn Blend R/T2.2.1.8.3.57 Autumn Blend Smooth2.2.1.8.3.58 Autumn Blend V/M2.2.1.8.3.59 Autumn Blend W/C2.2.1.8.3.60 Autumn Rose Clear W/C2.2.1.8.3.61 Autumn Rose R/T2.2.1.8.3.62 Autumn Rose Smooth2.2.1.8.3.63 Autumn Rose V/M2.2.1.8.3.64 Autumn Rose W/C2.2.1.8.3.65 Aztec Red2.2.1.8.3.66 Bordeaux2.2.1.8.3.67 Briarcliffe2.2.1.8.3.68 Buckskin2.2.1.8.3.69 Burgundy Blend2.2.1.8.3.70 BW 50 R/T2.2.1.8.3.71 BW 50 V/M2.2.1.8.3.72 BW 50 W/C2.2.1.8.3.73 Canyon Blend R/T Full Range2.2.1.8.3.74 Canyon Blend R/T Lite Flash2.2.1.8.3.75 Canyon R/T2.2.1.8.3.76 Charcoal Gray2.2.1.8.3.77 Chocolate R/T2.2.1.8.3.78 Chocolate R/T Full Range2.2.1.8.3.79 Chocolate Smooth2.2.1.8.3.80 Chocolate Smooth Full Range2.2.1.8.3.81 Chocolate W/C2.2.1.8.3.82 Chocolate W/C Full Range2.2.1.8.3.83 Cocoa2.2.1.8.3.84 Dark Red Flash W/C NB2.2.1.8.3.85 Dark Red Flash Smooth NB2.2.1.8.3.86 Dark Red Flash Bark2.2.1.8.3.87 Dark Red Flash V/M2.2.1.8.3.88 Dark Red Smooth2.2.1.8.3.89 Desert Brown Smooth2.2.1.8.3.90 Desert Brown W/C2.2.1.8.3.91 Desert Sage Smooth2.2.1.8.3.92 Desert Sage W/C

04 21 00-29

2.2.1.8.3.93 Desert Tan Smooth2.2.1.8.3.94 Desert Tan W/C2.2.1.8.3.95 Harrison Range2.2.1.8.3.96 Harvest Blend2.2.1.8.3.97 Hoosier Blend2.2.1.8.3.98 Knox Blend2.2.1.8.3.99 Latrobe Blend W/C2.2.1.8.3.100 Lite Chocolate FL V/M (W.B.)2.2.1.8.3.101 Patent Black W/C2.2.1.8.3.102 Phoenix Red2.2.1.8.3.103 Pioneer Blend Smooth2.2.1.8.3.104 Pioneer Blend W/C2.2.1.8.3.105 Pioneer Blend W/C IS2.2.1.8.3.106 Pioneer W/C2.2.1.8.3.107 Red Bark Full Range2.2.1.8.3.108 Red Brush-Tex2.2.1.8.3.109 Red Brush-Tex Flash2.2.1.8.3.110 Red Smooth2.2.1.8.3.111 Red Smooth Full Range2.2.1.8.3.112 Red Smooth Iron Spot2.2.1.8.3.113 Red V/M2.2.1.8.3.114 Red V/M Full Range2.2.1.8.3.115 Red W/C Full Range2.2.1.8.3.116 Rustic Red2.2.1.8.3.117 Santa Fe R/T2.2.1.8.3.118 Santa Fe Smooth2.2.1.8.3.119 Santa Fe W/C2.2.1.8.3.120 Santa Fe W/C IS2.2.1.8.3.121 Sunset Clear W/C2.2.1.8.3.122 Sunset Flash R/T2.2.1.8.3.123 Sunset Flash Smooth2.2.1.8.3.124 Sunset Flash V/M2.2.1.8.3.125 Sunset Flash W/C2.2.1.8.3.126 Terra Cotta Bark2.2.1.8.3.127 Terra Cotta Red R/T2.2.1.8.3.128 Terra Cotta Red V/M2.2.1.8.3.129 Terra Cotta Red W/C2.2.1.8.3.130 Woodsfield Blend

2.2.1.9 Meridian Size: 3-5/8 inch Wide by 3-5/8 inch High by 15-5/8 inch Long (92.1 mm Wide by 92.1 mm High by 396.9 mm Long).

2.2.1.9.1 Face Brick: ASTM C 216 Grade: SW Type: FBS.2.2.1.9.2 Face Brick: ASTM C 216 Grade: SW Type: FBX.2.2.1.9.3 Colors:

2.2.1.9.3.1 As selected by the Architect from the range available within the allowance specified.

2.2.1.9.3.2 #41 W/C2.2.1.9.3.3 #41 Smooth2.2.1.9.3.4 #130-1 W/C2.2.1.9.3.5 #340-1 W/C2.2.1.9.3.6 85/15 W/C2.2.1.9.3.7 85/15 Clear W/C2.2.1.9.3.8 938-1 Light Gray W/C2.2.1.9.3.9 940-1 Medium Gray W/C2.2.1.9.3.10 942-1 Dark Gray W/C2.2.1.9.3.11 Autumn Blend Clear W/C2.2.1.9.3.12 Autumn Blend Smooth ES

04 21 00-30

2.2.1.9.3.13 Autumn Blend W/C ES2.2.1.9.3.14 Autumn Rose Smooth ES2.2.1.9.3.15 Autumn Rose W/C ES2.2.1.9.3.16 Briarcliffe2.2.1.9.3.17 Buckskin2.2.1.9.3.18 Burgundy Blend2.2.1.9.3.19 BW 50 W/C2.2.1.9.3.20 Charcoal Gray2.2.1.9.3.21 Chocolate Smooth2.2.1.9.3.22 Chocolate Smooth Full Range ES2.2.1.9.3.23 Chocolate W/C2.2.1.9.3.24 Chocolate W/C Full Range ES2.2.1.9.3.25 Cocoa2.2.1.9.3.26 Colonial Brown2.2.1.9.3.27 Dark Red Flash W/C NB2.2.1.9.3.28 Dark Red Flash Smooth NB2.2.1.9.3.29 Dark Red Flash V/M2.2.1.9.3.30 Dark Red Smooth ES2.2.1.9.3.31 Eau Claire2.2.1.9.3.32 Frisco Blend2.2.1.9.3.33 Harrison Range2.2.1.9.3.34 Hoosier Blend2.2.1.9.3.35 Knox Blend2.2.1.9.3.36 Latrobe Blend W/C2.2.1.9.3.37 Mohican Blend2.2.1.9.3.38 Monroe Blend2.2.1.9.3.39 Olde Harvard Smooth2.2.1.9.3.40 Olde Windsor2.2.1.9.3.41 Pioneer Blend Smooth ES2.2.1.9.3.42 Pioneer Blend W/C ES2.2.1.9.3.43 Pioneer W/C2.2.1.9.3.44 Red Smooth2.2.1.9.3.45 Red Smooth Full Range ES2.2.1.9.3.46 Red W/C Full Range ES2.2.1.9.3.47 Rose Mist2.2.1.9.3.48 Rustic Red2.2.1.9.3.49 Santa Fe Smooth ES2.2.1.9.3.50 Santa Fe W/C ES2.2.1.9.3.51 Sunset Clear W/C2.2.1.9.3.52 Sunset Flash Smooth ES2.2.1.9.3.53 Sunset Flash W/C ES2.2.1.9.3.54 Terra Cotta Red W/C2.2.1.9.3.55 University Blend Smooth2.2.1.9.3.56 University Blend W/C2.2.1.9.3.57 Woodsfield Blend

2.2.2 Building Brick: ASTM C 62: Solid units.2.2.2.1 Grade NW for interior and backup areas.2.2.2.2 SW when in contact with earth.2.2.2.3 MW exterior and backup areas.

2.2.3 Fire Brick: ASTM C 1261.

2.3 ACCESSORIES

2.3.1 Reinforcing Bars:

04 21 00-31

2.3.1.1 Billet Steel Deformed Bars: ASTM A 615.2.3.1.2 Rail Steel Deformed Bars: ASTM A 616 or A 996.2.3.1.3 Axle Steel Deformed Bars: ASTM A 617 or A 996.2.3.1.4 Epoxy Coated Billet Steel: ASTM A 615 and ASTM A 775.

2.3.2 Corrugated Ties: ASTM A 1008, 20 Gage, Width: __________ inch, length: ___________ inches, Galvanized: ASTM A 153, Class B-2.

2.3.3 Truss Joint Reinforcement: ASTM A 82 (ASTM A 666), Size________, Galvanized: ASTM A 153, Class B-2.

2.3.4 Ladder Joint Reinforcement: ASTM A 82 (ASTM A 666), Size________, Galvanized: ASTM A 153, Class B-2.

2.3.5 Wire Wall Ties: ASTM A 82, Wire Size: ________, Shape: ________, Length: ________ inches, Galvanized: ASTM A 153, Class B-2.

2.3.6 Dovetail Anchors: ASTM A 1008, Gage: ______, Length: _______ inches, Galvanized: ASTM A 153, Class B-2.

2.3.7 Anchors:2.3.7.1 Plate Bent Bar Anchors: ASTM A 36, Diameter: ________inch, Length:

________ inches, Galvanized: ASTM A 153, Class B-2.2.3.7.2 Plate Header Bar Anchors: ASTM A 36, Diameter: ________ inch, Length:

________ inches, Galvanized: ASTM A 153, Class B-2.

2.3.8 Flashing:2.3.8.1 Copper: ASTM B 370, 5 oz.2.3.8.2 Copper: ASTM B 370, 7 oz.2.3.8.3 Stainless Steel: ASTM A 666, Grade_______, Type 304.2.3.8.4 Plastic: PVC, 30 mils (0.75 mm) thick.2.3.8.5 Combinations:

2.3.8.5.1 Plastic/Copper: 5 oz.2.3.8.5.2 Cooper/Fabric: 5 oz.2.3.8.5.3 Asphalt-Coated Copper: 5 oz.2.3.8.5.4 Plastic/Copper: 7 oz.2.3.8.5.5 Cooper/Fabric: 7 oz.2.3.8.5.6 Asphalt-Coated Copper: 7 oz.

2.3.9 Preformed Control and Expansion Joints:2.3.9.1 Premolded Foam: ASTM D 1056, Type 2, Class A, Grade 1.2.3.9.2 Neoprene: ASTM D 1056, Type 2, Class A, Grade 1.2.3.9.3 Backer Rod: Extruded, Closed Cell Polyethylene.

2.3.10 Weep holes:2.3.10.1 Rope Wicks: Cotton Sash Cord, 12 inches long with end laid in cavity.2.3.10.2 Plastic Tubes: 1/4 inch (6 mm) minimum inside diameter by 4 inches (102 mm)

long.2.3.10.3 Aluminum Weep/Vents.2.3.10.4 Plastic Weep/Vents.

2.3.11 Mortar and Grout: As specified in Section 04 05 13 - Masonry Mortaring.

2.3.12 Nailing Strips: Specified in Section 06 11 00 - Wood Framing.

2.3.13 Steel Lintels: Size as indicated on Drawings and as specified in Section 05 50 00 - Metal Fabrications.

04 21 00-32

3 EXECUTION

3.1 EXAMINATION

3.1.1 Do not begin installation until substrates have been properly prepared.

3.1.2 Verify items provided by other sections of work are properly sized and located.

3.1.3 Verify built-in items are in proper location, and ready for roughing into masonry work.

3.1.4 If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

3.2.1 Clean surfaces thoroughly prior to installation.

3.2.2 Direct and coordinate placement of metal anchors supplied to other sections.

3.2.3 Furnish temporary bracing during installation of masonry work. Maintain in place until building structure provides permanent support.

3.2.4 Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

3.3.1 Install in accordance with ANSI A41.1 Building Code Requirements for Masonry, ANSI A41.2 Building Code Requirements for Reinforced Masonry or equivalent sections of the applicable Code.3.3.1.1 Establish lines, levels, and coursing indicated. Protect from displacement.3.3.1.2 Maintain masonry courses to uniform dimension. Form bed and head joints of

uniform thickness.3.3.1.3 Coursing of Brick Units: Lay masonry in bond pattern as indicated on Drawings3.3.1.4 Do not shift or tap masonry units after mortar has achieved initial set. Where

adjustment is required, remove mortar and replace.3.3.1.5 Perform job site cutting of masonry units with proper tools to assure straight,

clean, unchipped edges. Prevent broken masonry unit corners or edges.3.3.1.6 Isolate masonry from vertical structural framing members with movement joint as

indicated on Drawings.3.3.1.7 Isolate top of masonry from horizontal structural framing members and slabs or

decks with compressible joint filler.

3.3.2 Tooling and Pointing:3.3.2.1 Joint Profile: Tool mortar joints to a concave appearance.3.3.2.2 Joint Profile: Tool mortar joints to a concave V-shaped appearance.3.3.2.3 Joint Profile: Tool mortar joints to a concave grapevine appearance.3.3.2.4 Tool exposed joints when "thumb-print" hard.3.3.2.5 Flush cut all joints not tooled.3.3.2.6 When pointing, rake mortar joints to a depth of not less than 1/2 inch (12 mm).

Fill solidly with pointing mortar. Tool joints.

3.3.3 Masonry Flashings:3.3.3.1 Clean surface of masonry from projections that might puncture flashing.3.3.3.2 Place through-wall flashing on bed of mortar.3.3.3.3 Cover flashing with mortar.3.3.3.4 Lap flashing a minimum of 6 inches (152 mm).3.3.3.5 Leave flashing project from face of wall approximately 1/4 inch (6 mm) to form a

04 21 00-33

drip. Flashing shall be cut back to the face of the wall after inspection, if the drip is deemed objectionable by Architect.

3.3.4 Weeps:3.3.4.1 Provide weep holes in head joints of the first brick course immediately above

flashing by placing weeps no more than 24 inches (610 mm) on center horizontally.

3.3.4.2 Keep cavity free from mortar.

3.3.5 Expansion and Control Joints: Provide where indicated on the Drawings.3.3.5.1 Keep clean from all mortar and debris.3.3.5.2 Install neoprene pre-molded foam pad.3.3.5.3 Install backer rod.3.3.5.4 Install sealant as specified in Section 07 90 00 - Joint Protection.

3.4 CLEANING

3.4.1 Remove excess mortar and mortar smears as work progresses.

3.4.2 Replace defective mortar. Match adjacent work.

3.4.3 Clean soiled surfaces with cleaning solution.

3.4.4 Use non-metallic tools in cleaning operations.

3.5 PROTECTION OF FINISHED WORK

3.5.1 Protect exposed external corners subject to damage.

3.5.2 Protect base of walls from mud and mortar splatter.

3.5.3 Protect masonry and other items built into masonry walls from mortar droppings and staining caused by mortar.

3.5.4 Protect tops of masonry work with waterproof coverings secured in place without damaging masonry. Provide coverings where masonry is exposed to weather when work is not in progress.

END OF SECTION

04 21 00-34