SECTION 06 49 00SHUTTERS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2017 - 2019 ARCAT, Inc. - All rights reserved

PART 1 GENERAL

1.1 SECTION INCLUDES

A. Exterior shutters.

B. Exterior shutter hardware.

C. Interior shutters and hardware.

1.2 RELATED SECTIONS

A. Section 06 10 00 - Rough Carpentry.

B. Section 06 20 00 - Finish Carpentry.

C. Section 09 90 00 - Painting and Coating.

1.3 SUBMITTALS

A. Submit under provisions of Section 01 30 00 - Administrative Requirements.

B. Product Data: Manufacturer's data sheets on each product to be used, including:1. Preparation instructions and recommendations.2. Storage and handling requirements and recommendations.3. Installation methods.

C. Shop Drawings: Include detailed drawings showing complete dimensions, all materials, and hardware.

1.4 QUALITY ASSURANCE

A. Manufacturer Qualifications: Company specializing in the fabrication of wood shutters, with not less than 10 years of experience.

1.5 DELIVERY, STORAGE, AND HANDLING

A. Deliver, store, and handle in accordance with manufacturer's recommendations.

PART 2 PRODUCTS

2.1 MANUFACTURERS

06 49 00-1

A. Acceptable Manufacturer: Shuttercraft, Inc., which is located at: 15 Orchard Pk.; Madison, CT 06443; Tel: 203-245-2608; Fax: 203-245-5969; Email:request info (all@shuttercraft.com); Web:http://www.shuttercraft.com

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01 60 00 - Product Requirements.

2.2 EXTERIOR SHUTTERS

A. MLHD: Moveable Louver Shutters:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Side Stile Thickness: 1-3/8 inches.6. Side Stile Width: 2 inches.7. Cross Rail Thickness: 1-3/16 inches.8. Top Rail Width: 3-1/2 inches +/-.9. Center Rail Width: 2-3/4 inches.10. Bottom Rail Width: 3-3/4 inches +/-.11. Cross Rail Location: Standard.12. Cross Rail Location: ____.13. Louvers:

a. 1-7/8 inches.b. 2-1/2 inches.c. 3-1/2 inches.

14. Profile: Inner Stile Bead.15. Target Spacing:

a. 1-1/2 inches on center.b. 2 inches on center.c. 3 inches on center.

16. Yoke Pins and Tilt Rods: Galvanized.17. Finish:

a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

B. FLS: Fixed Louver Standard Shutters:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Side Stile Thickness: 1-1/16 inches.6. Side Stile Width: 1-1/2 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: Standard.11. Cross Rail Location: ____.12. Louvers: 1-3/8 x 1/4 inches.13. Profile: Flush stiles and rails.

06 49 00-2

14. Target Spacing: 1-1/8 inches on center.15. Louvers Up.16. Louvers Down.17. Included Options:

a. False Tilts: Top and Bottom.b. False Tilt: Bottom only.c. Mouse Holes: Top and Bottom.d. Mouse Hole: Bottom only.e. Horns on Bottom.

18. Finish:a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

C. FLHD: Fixed Louver Heavy Duty Shutters:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Side Stile Thickness: 1-3/8 inches.6. Side Stile Width: 2 inches.7. Top Rail Width: 3-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: Standard.11. Cross Rail Location: ____.12. Louvers: 1-5/8 x 3/8 inches.13. Profile: Inner Stile Bead.14. Target Spacing: 1-3/8 inches on center.15. Louvers Up.16. Louvers Down.17. Included Options:

a. False Tilts: Top and Bottom.b. False Tilt: Bottom only.c. Mouse Holes: Top and Bottom.d. Mouse Hole: Bottom only.e. Horns on Bottom.f. 1-1/2 inches on center.g. 2 inches on center.h. 3 inches on center.

18. Yoke Pins and Tilt Rods: Galvanized.19. Finish:

a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

D. RPS: Raised Panel Standard Shutters:1. Species: Western Red Cedar.

06 49 00-3

2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Side Stile Thickness: 1-1/16 inches.6. Side Stile Width: 1-1/2 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: Regular 50/50 Split.11. Cross Rail Location: Cottage Style 40/60 Split.12. Cross Rail Location: Williamsburg Style 3 Panel Small Middle.13. Other Cross Rail Location: ____.14. Panel: 5/8 inch raised/flat panel or 1/2 inch double sided flat panel.15. Profile: Flush stiles and rails.16. Cutout: ____.17. Finish:

a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

E. RPHD: Raised Panel Heavy Duty Shutters:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Side Stile Thickness: 1-3/8 inches.6. Side Stile Width: 2 inches.7. Top Rail Width: 3-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: Regular 50/50 Split.11. Cross Rail Location: Cottage Style 40/60 Split.12. Cross Rail Location: Williamsburg Style 3 Panel Small Middle.13. Other Cross Rail Location: ____.14. Panel: 5/8 inch raised/flat panel or 1/2 inch thick double sided flat panel.15. Profile: Inner Stile Bead.16. Cutout: ____.17. Finish:

a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

F. B&B: Board and Batten Shutters:1. Species: Western Red Cedar.2. Construction: Stainless Screw and Glue Reinforced.3. Shutter Width: ____.4. Shutter Height: ____.5. Vertical Board Thickness: 1 inch +/-.

06 49 00-4

6. Board Spacing: 1/8 inch.7. Board Inner Edges: Beveled.8. Number of Boards:

a. 2 boards.b. 3 boards.c. 4 boards.d. _____.

9. Batten Thickness: 1 inch +/-.10. Batten Width: 3-1/2 inches.11. Batten Configuration:

a. Regular.b. 20/60/20.c. Triple.d. 1/4 Arch.e. Zee.f. Curve.g. _____.

12. Batten Edges: Beveled.13. Shutter Top Profile:

a. Straight.b. 1/4 Arch.c. Curve.d. _____.

14. Cutout: ____.15. Finish:

a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

G. DE-FL: Premium Design Traditional Shutters:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Frame Thickness:

a. 1-3/8 inches.b. 1-1/2 inches.

6. Side Stile Width: 2-3/4 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: Standard.11. Cross Rail Location: ____.12. Louvers:

a. 1-7/8 inches.b. 2-1/2 inches.c. 3-1/2 inches.

13. Profile: Flush sanded.14. Target Spacing:

a. 1-1/2 inches on center.b. 2 inches on center.c. 3 inches on center.

06 49 00-5

15. Louvers Up.16. Louvers Down.17. Included Options:

a. False Tilts: Top and Bottom.b. False Tilt: Bottom only.c. Mouse Holes: Top and Bottom.d. Mouse Hole: Bottom only.e. Horns on Bottom.f. Decorative Surface Molding:

1) DM #1.2) DM #2.3) DM #3.4) DM #4.5) Quarter round.6) Half round.7) ____.

18. Finish:a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

H. DE-FLE: Premium Design European Shutters:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Frame Thickness:

a. 1-3/8 inches.b. 1-1/2 inches.

6. Side Stile Width: 2-3/4 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: Standard.11. Cross Rail Location: ____.12. Louver Width:

a. 1-3/4 inches.b. 2-1/4 inches.c. 3-1/4 inches.

13. Beveled Louvers.14. Profile: Flush sanded.15. Target Spacing:

a. 1-7/16 inches on center.b. 1-3/4 inches on center.c. 3 inches on center.

16. Louvers Up.17. Louvers Down.18. Decorative Surface Molding:

a. DM #1.b. DM #2.c. DM #3.d. DM #4.

06 49 00-6

e. Quarter round.f. Half round.g. ____.

19. Finish:a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

I. DE-RP: Premium Design Raised Panel Shutters:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Frame Thickness:

a. 1-3/8 inches.b. 1-1/2 inches.

6. Side Stile Width: 2-3/4 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: Regular.11. Cross Rail Location: ____.12. Panel: 5/8 inch raised/flat panel.13. Profile: Flush sanded.14. Cutout: ____.15. Decorative Surface Molding:

a. DM #1.b. DM #2.c. DM #3.d. Quarter round.e. Half round.f. ____.

16. Finish:a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

J. RPS/FLS: Combo Panel and Fixed Louver Shutters:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Side Stile Thickness: 1-1/16 inches.6. Side Stile Width: 1-1/2 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: 50/50 split.

06 49 00-7

11. Cross Rail Location: 40/60 split.12. Cross Rail Location: 1/3 over 2/313. Cross Rail Location: ____.14. Louvers: 1-3/8 x 1/4 inches.15. Target Spacing: 1-1/8 inches on center.16. Panel: 5/8 inch raised/flat panel.17. Cutout: ____.18. Profile: Flush sanded.19. Finish:

a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

K. RPHD/FLHD: Combo Panel and Fixed Louver Shutters, Heavy Duty:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Side Stile Thickness: 1-3/8 inches.6. Side Stile Width: 2 inches.7. Top Rail Width: 3-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: 50/50 split.11. Cross Rail Location: 40/60 split.12. Cross Rail Location: 1/3 over 2/313. Cross Rail Location: ____.14. Louvers: 1-5/8 x 3/8 inches.15. Target Spacing: 1-3/8 inches on center.16. Panel: 5/8 inch raised/flat panel.17. Cutout: ____.18. Profile: Inner Stile Bead.19. Finish:

a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

L. RPHD/MLHD: Combo Panel and Moveable Louver Shutters, Heavy Duty:1. Species: Western Red Cedar.2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Side Stile Thickness: 1-3/8 inches.6. Side Stile Width: 2 inches.7. Top Rail Width: 3-1/2 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Cross Rail Location: 50/50 split.

06 49 00-8

11. Cross Rail Location: 40/60 split.12. Cross Rail Location: 1/3 over 2/313. Cross Rail Location: ____.14. Louvers:

a. 1-7/8 inches.b. 2-1/2 inches.c. 3-1/2 inches.

15. Target Spacing:a. 1-1/2 inches on center.b. 2 inches on center.c. 3 inches on center.

16. Panel: 5/8 inch raised/flat panel.17. Cutout: ____.18. Profile: Inner Stile Bead.19. Finish:

a. Unfinished, for field finishing.b. Factory primed, gray, for field painting.c. Factory primed, white, for field painting.d. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

M. Exterior Hardware:1. Regular CT Flat Strap Hinge and Pintle.2. Heavy Duty CT Flat Strap Hinge and Pintle.3. Heavy Duty Offset Strap Hinge and Pintle, 1-1/4 inch offset.4. Heavy Duty Offset Strap Hinge and Pintle, 2-1/4 inch offset.5. JW Flat Strap Hinge:6. Suffolk Jamb Leaf Pintle.7. Suffolk Center Hinge.8. Suffolk Style "L" Hinge.9. Suffolk Lag Pintles.10. Suffolk Plate Pintles.11. Suffolk Narrow Plate Pintle.12. Suffolk Strap Hinge.13. BW Brick Face Hinge and Pintle.14. Regular Economy New York Offsets.15. Heavy Duty NY Offsets Hinge and Pintle Sets.16. Heavy Duty NY Separates HD NY "L" Hinges.17. Heavy Duty NY Separates Plate Pintles.18. 4 inch NY Lag Pintle.19. HD NY Center Hinges.20. Brick Face Pintles.21. JW New York Offsets.22. New Construction Hinge.23. JW Center Hinge and Pintle.24. JW 4 inch Lag Pintle.25. Acme Lull and Porter.26. Mortise Hinge and Fastener.27. Lift Off Parliament.28. Lift Off Butt Hinge.29. JW Long Strap and Pintle Set.30. Cast Iron Pintle and Steel Strap, Powder Coated.31. Traditional "S" Hold.32. LC Hammered "S" Hold.

06 49 00-9

33. Scroll.34. Propeller.35. BW Beacon Hill.36. BW English Rat.37. BW Offset Rat.38. BW Soldier.39. LC Dolphin.40. JW Rat Tail.41. JW Georgetown.42. JW Charleston.43. JW English Rat.44. BW Belmont.45. BW O-Belmont.46. Bullet Catch Hidden Holdback.47. Square Shutter Bolt.48. Round Shutter Bolt.49. JW Shutter Slide Bolt.50. JW Hurricane Slide Bolt.51. New England Hinge.52. T-Hinge and Wire Pintle.53. JW Bahama Hinge.54. Shutter Fastener.55. Bahama Telescoping Rods.56. Bahama Hook and Eye Stay - 24 inch.57. JW Ring Pull with Plate.58. JW Ring Pull with Screw.59. BW Hook and Staple Stay.60. Static Mount Clips.

2.3 INTERIOR SHUTTERS

A. MLIP: Interior Plantation Moveable Louver Shutters:1. Species:

a. Basswood and Poplar.b. Stain Grade Basswood.c. Red Oak.d. Mahogany.

2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Thickness: 1-1/16 inches.6. Side Stile Width: 2 inches.7. Top Rail Width: 4 inches +/-.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 4 inches +/-.10. Louver Width:

a. 1-7/8 inches.b. 2-1/2 inches.c. 3-1/2 inches.

11. Louver Thickness: 3/8 inch.12. Profile: Decorative Inner Stile Bead.13. Target Spacing:

a. 1-1/2 inches on center.b. 2 inches on center.c. 3 inches on center.

14. Included Options:

06 49 00-10

a. Extra Rail.b. No Center Rail.c. Rabbet and Bead for Overlap.d. 1/4 Arch Top.e. Small Curve Radius Top.f. Custom Wide Side Stiles: ____ inches.g. Custom Rail Size: ____ inches.

15. Finish:a. Unfinished, for field finishing.b. Factory primed, white, for field painting.c. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

16. Hardware:a. Hinge Set: Regular.b. Hinge Set: Tall.c. Hinge Set: Half Set.d. Hinge Finish:

1) Yellow Brass.2) Antique Brass.3) Bronze.4) White.5) Shiny Nickel.6) Brushed Nickel.

e. Knobs: 1 inch, Shiny Brass.f. Knobs: 1 inch, Nickel.

B. RPI: Interior Raised Panel Shutters:1. Species:

a. Paint Grade Basswood.b. Stain Grade Basswood.c. Red Oak.d. Mahogany.

2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Thickness: 1-1/8 inches.6. Side Stile Width: 1-3/4 inches.7. Top Rail Width: 4 inches +/-.8. Center Rail Width: 3 inches +/-.9. Bottom Rail Width: 4 inches +/-.10. Panel: Raised both sides.11. Profile: Decorative Inner Stile Bead.12. Included Options:

a. Extra Rail.b. No Center Rail.c. Rabbet and Bead for Overlap.d. 1/4 Arch Top.e. Small Curve Radius Top.f. Custom Wide Side Stiles: ____ inches.g. Custom Rail Size: ____ inches.

13. Finish:a. Unfinished, for field finishing.b. Factory primed, white, for field painting.c. Factory Primed and Painted:

06 49 00-11

1) Color: ____.2) Sheen: ____.

14. Hardware:a. Hinge Set: Regular.b. Hinge Set: Tall.c. Hinge Set: Half Set.d. Hinge Finish:

1) Yellow Brass.2) Antique Brass.3) Bronze.4) White.5) Shiny Nickel.6) Brushed Nickel.

e. Knobs: 1 inch, Shiny Brass.f. Knobs: 1 inch, Nickel.

C. MLI: Interior Traditional Moveable Louver Shutters:1. Species:

a. Basswood and Poplar.b. Pine.c. Red Oak.

2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Thickness: 3/4 inches.6. Side Stile Width: 1-1/2 inches.7. Top Rail Width: 3-1/2 inches +/-.8. Center Rail Width: 3-1/2 inches +/-.9. Bottom Rail Width: 3-1/2 inches +/-.10. Louver Width: 1-1/4 inches.11. Profile: Flat Sanded.12. Include Rabbet and Bead.13. Finish:

a. Unfinished, for field finishing.b. Factory stain and clear coat, satin.c. Factory stain and clear coat, gloss.d. Factory primed, white, for field painting.e. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

14. Hardware:a. Bi-fold Set.b. Half Set.c. Tall Set.d. Hinge Set Finish:

1) Brass.2) White.3) Nickel.

e. Knobs: 3/4 inch, Shiny Brass.f. Knobs: 1 inch, Shiny Brass.g. Knobs: 1 inch, Shiny Nickel.

D. RPI Colonial: Interior Colonial Style Raised Panel Shutters:1. Shutter Width: ____.2. Shutter Height: ____.

06 49 00-12

3. Thickness: 3/4 inches.4. Side Stile Width: 1-5/8 to 2-1/2 inches.5. Top Rail Width: 2-3/8 inches +/-.6. Center Rail Width: 2-3/8 inches +/-.7. Bottom Rail Width: 3-3/8 inches +/-.8. Panel: Raised both sides.9. Included Options:

a. Extra Rail.b. No Center Rail.c. Rabbet and Bead.

10. Finish:a. Factory primed, white, for field painting.b. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

11. Hardware:a. Bi-fold Set.b. Half Set.c. Tall Set.d. Hinge Set Finish:

1) Brass.2) White.3) Nickel.

e. Knobs: 3/4 inch, Shiny Brass.f. Knobs: 1 inch, Shiny Brass.g. Knobs: 1 inch, Shiny Nickel.

E. FPI: Interior Colonial Style Flat Panel Shutters:1. Shutter Width: ____.2. Shutter Height: ____.3. Thickness: 3/4 inches.4. Side Stile Width: 1-5/8 to 2-1/2 inches.5. Top Rail Width: 2-3/8 inches +/-.6. Center Rail Width: 2-3/8 inches +/-.7. Bottom Rail Width: 3-3/8 inches +/-.8. Panel: Flat both sides.9. Included Options:

a. Extra Rail.b. No Center Rail.c. Rabbet and Bead.

10. Finish:a. Factory primed, white, for field painting.b. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.

11. Hardware:a. Bi-fold Set.b. Half Set.c. Tall Set.d. Hinge Set Finish:

1) Brass.2) White.3) Nickel.

e. Knobs: 3/4 inch, Shiny Brass.f. Knobs: 1 inch, Shiny Brass.

06 49 00-13

g. Knobs: 1 inch, Shiny Nickel.

F. INT-DE-FL: Premium Interior Fixed Louver Shutters, Traditional:1. Species:

a. Paint Grade Basswood.b. Stain Grade Basswood.c. Red Oak.d. Mahogany.

2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Thickness: 1-3/8 inches.6. Side Stile Width: 2-3/4 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Louver Width:

a. 1-7/8 inches.b. 2-1/2 inches.c. 3-1/2 inches.

11. Profile: Traditional.12. Target Spacing:

a. 1-1/2 inches on center.b. 2 inches on center.c. 3 inches on center.

13. Included Options:a. Extra Rail.b. Rabbet and Bead for Overlap.c. 1/4 Arch Top.d. Small Curve Radius Top.e. Custom Wide Side Stiles: ____ inches.f. Custom Rail Size: ____ inches.g. Surface Molding.

14. Finish:a. Unfinished, for field finishing.b. Factory primed, white, for field painting.c. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.

15. Hardware:a. Hinge Set: Regular.b. Hinge Set: Tall.c. Hinge Set: Half Set.d. Hinge Finish:

1) Yellow Brass.2) Antique Brass.3) Bronze.4) White.5) Shiny Nickel.6) Brushed Nickel.

e. Knobs: 1 inch, Shiny Brass.f. Knobs: 1 inch, Nickel.

G. INT-DE-FLE: Premium Interior Fixed Louver Shutters, European:1. Species:

a. Paint Grade Basswood.

06 49 00-14

b. Stain Grade Basswood.c. Red Oak.d. Mahogany.

2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Thickness: 1-3/8 inches.6. Side Stile Width: 2-3/4 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Louver Width:

a. 1-3/4 inches.b. 2-1/4 inches.c. 3-1/4 inches.

11. Profile: European Beveled.12. Target Spacing:

a. 1-7/16 inches on center.b. 1-3/4 inches on center.c. 3 inches on center.

13. Included Options:a. Extra Rail.b. Rabbet and Bead for Overlap.c. 1/4 Arch Top.d. Small Curve Radius Top.e. Custom Wide Side Stiles: ____ inches.f. Custom Rail Size: ____ inches.g. Surface Molding.

14. Finish:a. Unfinished, for field finishing.b. Factory primed, white, for field painting.c. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

15. Hardware:a. Hinge Set: Regular.b. Hinge Set: Tall.c. Hinge Set: Half Set.d. Hinge Finish:

1) Yellow Brass.2) Antique Brass.3) Bronze.4) White.5) Shiny Nickel.6) Brushed Nickel.

e. Knobs: 1 inch, Shiny Brass.f. Knobs: 1 inch, Nickel.

H. INT-DE-RP: Premium Interior Raised Panel Shutters:1. Species:

a. Paint Grade Basswood.b. Stain Grade Basswood.c. Red Oak.d. Mahogany.

2. Construction: Mortise and Tenon.

06 49 00-15

3. Shutter Width: ____.4. Shutter Height: ____.5. Thickness: 1-3/8 inches.6. Side Stile Width: 2-3/4 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.10. Panel: Raised both sides.11. Profile: Flush sanded.

a. 1-1/2 inches on center.b. 2 inches on center.c. 3 inches on center.

12. Included Options:a. Extra Rail.b. Rabbet and Bead for Overlap.c. 1/4 Arch Top.d. Small Curve Radius Top.e. Custom Wide Side Stiles: ____ inches.f. Custom Rail Size: ____ inches.g. Inset Molding.h. Surface Molding.

13. Finish:a. Unfinished, for field finishing.b. Factory primed, white, for field painting.c. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

14. Hardware:a. Hinge Set: Regular.b. Hinge Set: Tall.c. Hinge Set: Half Set.d. Hinge Finish:

1) Yellow Brass.2) Antique Brass.3) Bronze.4) White.5) Shiny Nickel.6) Brushed Nickel.

e. Knobs: 1 inch, Shiny Brass.f. Knobs: 1 inch, Nickel.

I. INT-DE-FP: Premium Interior Flat Panel Shutters:1. Species:

a. Paint Grade Basswood.b. Stain Grade Basswood.c. Red Oak.d. Mahogany.

2. Construction: Mortise and Tenon.3. Shutter Width: ____.4. Shutter Height: ____.5. Thickness: 1-3/8 inches.6. Side Stile Width: 2-3/4 inches.7. Top Rail Width: 2-3/4 inches.8. Center Rail Width: 2-3/4 inches.9. Bottom Rail Width: 3-3/4 inches.

06 49 00-16

10. Panel: Flat both sides.11. Profile: Flush sanded.

a. 1-1/2 inches on center.b. 2 inches on center.c. 3 inches on center.

12. Included Options:a. Extra Rail.b. Rabbet and Bead for Overlap.c. 1/4 Arch Top.d. Small Curve Radius Top.e. Custom Wide Side Stiles: ____ inches.f. Custom Rail Size: ____ inches.g. Inset Molding.h. Surface Molding.

13. Finish:a. Unfinished, for field finishing.b. Factory primed, white, for field painting.c. Factory Primed and Painted:

1) Color: ____.2) Sheen: ____.3) Brand: ____.

14. Hardware:a. Hinge Set: Regular.b. Hinge Set: Tall.c. Hinge Set: Half Set.d. Hinge Finish:

1) Yellow Brass.2) Antique Brass.3) Bronze.4) White.5) Shiny Nickel.6) Brushed Nickel.

e. Knobs: 1 inch, Shiny Brass.f. Knobs: 1 inch, Nickel.

PART 3 EXECUTION

3.1 EXAMINATION

A. Do not begin installation until substrates have been properly prepared.

B. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

A. Clean surfaces thoroughly prior to installation.

3.3 INSTALLATION

A. Install in accordance with manufacturer's instructions, approved submittals, and in proper relationship with adjacent construction. Install plumb and level.

B. Install hardware uniformly and precisely. Set hinges snug and flat. Adjust and align hardware so moving parts operate freely.

3.4 PROTECTION

06 49 00-17

A. Protect installed products until completion of project.

B. Touch-up, repair or replace damaged products before Substantial Completion.

END OF SECTION

06 49 00-18