Web Slings

Web

S

ling

s

WEB SLING HARDWARESteel Unilink Web Sling HardwareCombination Triangle and Choker Fitting

This forged, high carbon steel fitting, functions as both a triangle and choker.

Features, Advantages and Benefits

Promotes Safety

• Forged steel for strength and reliability

• Smooth rounded profile helps protect sling, worker and load

Saves Money

• May be rewebbed to reduce cost

• Zinc dichromate plated for longer life

• Unilinks cost less than triangle/choker combinations

Saves Time

• Large Crane hook opening - speeds rigging

• Positive Web-Trap capture - no need to stop and reposition web

• Functions both as a triangle and a choker - choke with either end

Forged Aluminum Triangles and Chokers

Aluminum is severely degraded by alkali, caustic environments, acids and salt water.

Aluminum Triangles and Chokers are available but may only be used with single ply web slings within the rated capacities shown in the table. They should not be used with Dura-Web 2000 webbing.

Forged from aircraft aluminum, this tough alloy is stronger than mild steel. Aluminum has the advantages of being lightweight, non-sparking and does not rust.

Note: Aluminum triangles and chokers DO NOT offer the advantages of the Web-Trap feature. Aluminum fittings are not as durable and cost more than steel.

26

Read Definition on page 3WARNING

Unilink CodesAnd Specifications

Avoid contact of hardware with load edges.Unilink has the same rated capacities as TT or TC slings.

Web Width(in.)

PartNo.

Dimensions(in).

Weight (lbs.)L D H Thick

2 SU2 3 11/16 2 11/16 9/16 1.1

3 SU3 5 1/16 3 7/8 5/8 2.4

4 SU4 6 3/16 4 1 3/4 4.0

Web Slings

Web

S

ling

s

Read Definition on page 3

Alloy Steel - For One Or Two Ply Slings

WEB SLING HARDWARE

Web-Trap Steel Sling Hardware - Triangles and Chokers

A significant improvement in triangle and choker design - featuring positive web capture. Webbing can slip to the side of ordinary fittings, not with Web-Trap. These fittings feature alloy steel for lighter sling weight and a zinc di-chromate plating to inhibit rust.

27

Webbing can slip with ordinary fittings.

Web-Trap preventsside shift.

* Unlink is standard fitting - Triangle and chokers available on special order only.

Alloy Steel - For Two Ply Slings

Alloy Steel - For One Ply Slings

Web-Trap Triangles Web-Trap Chokers

WebWidth

PartNo.

Dimensions (in.)Weight(lbs.)

PartNo.

Dimensions (in.)Weight(lbs.)L D T H L A D T H

*2" ST-2 2 3/8 1 3/4 1/2 5/8 1.0 SC-2 5 2 3/8 1 3/4 1/2 5/8 1.9

*3" ST-3 3 7/16 2 1/2 3/4 1.9 SC-3 6 1/4 3 3/8 2 1/2 3/4 3.6

*4" ST-4 4 1/8 2 3/8 1/2 13/16 2.8 SC-4 7 4 2 3/8 1/2 13/16 5.1

6" ST-6 5 1/2 3 1/8 3/4 1 1/16 6.6 SC-6 9 1/2 5 1/2 3 1/8 3/4 1 1/16 12

Web-Trap Triangles Web-Trap Chokers

WebWidth

PartNo.

Dimensions (in.)Weight(lbs.)

PartNo.

Dimensions (in.)Weight(lbs.)L D T H L A D T H

8" ST2-8 7 3/4 4 3/4 1 1/4 12 SC2-8 11 1/4 7 1/2 4 3/4 1 7/16 25

10" ST2-10 8 1/2 5 1 1 7/16 21 SC2-10 12 7/8 8 1/4 5 1 1 1/2 38

12" ST2-12 8 1/2 5 1/2 1 1 3/4 27 SC2-12 14 1/2 10 5 1/2 1 1 3/4 54

Web-Trap Triangles Web-Trap Chokers

WebWidth

PartNo.

Dimensions (in.)Weight(lbs.)

PartNo.

Dimensions (in.)Weight(lbs.)L D T H L A D T H

8" ST1-8 7 3/4 4 1/2 1 1/4 8 SC1-8 11 1/4 7 1/2 4 1/2 1 7/16 16

10" ST1-10 8 1/2 5 3/4 1 7/16 16 SC1-10 12 7/8 8 1/4 5 3/4 1 1/2 28

12" ST1-12 8 1/2 5 1/2 3/4 1 3/4 20 SC1-12 14 1/2 10 5 1/2 3/4 1 3/4 40

Web Slings

Web

S

ling

s

TUFF-EDGE II HARDWARE / BRIDLE SLINGS

Hardware/Bridle Slings

NOTE: Hardware capacities correspond to the appropriate sling capacities. See hardware dimension charts starting on page 91

WARNING *

SOS DOS TOS QOESingle Leg Double Leg Triple Leg Quad LegOblong Link Oblong Link Oblong Link Oblong LinkSling Hook Sling Hook Sling Hook (EE1801T)(EE1801T) (EE1801T) (EE1801T)

>

Do not exceed rated capacities. Sling tension increases as the angle from horizontal decreases.Slings should not be used at angles of less than 30°.Refer to Effect of Angle chart page 12.

Leng

th

Leng

th

Leng

th

Leng

th

Part No. ForWeb Sling

Legs

WebWidth(in.)

Web Plies

Number of

Legs

Rated Capacity (lbs.)* Alloy Sling Hook Oblong Link

Vertical @ 60° @ 45° @ 30° Size Dia. (in.)

EE1801T

1 1 Single 1,600 1TA 1/2

1 1 Double 2,700 2,200 1,600 1TA 1/2

1 1 Triple 4,100 3,300 2,400 1TA 3/4

1 1 Quad 5,500 4,500 3,200 1TA 1

EE2801T

1 2 Single 3,000 1 1/2TA 1/2

1 2 Double 5,100 4,200 3,000 1 1/2TA 3/4

1 2 Triple 7,700 6,300 4,500 1 1/2TA 3/4

1 2 Quad 10,300 8,400 6,000 1 1/2TA 1

EE1802T

2 1 Single 3,000 1 1/2TA 1/2

2 1 Double 5,100 4,200 3,000 1 1/2TA 3/4

2 1 Triple 7,700 6,300 4,500 1 1/2TA 3/4

2 1 Quad 10,300 8,400 6,000 1 1/2TA 1

EE2802T

2 2 Single 6,000 3TA 3/4

2 2 Double 10,300 8,400 6,000 3TA 1

2 2 Triple 15,500 12,700 9,000 3TA 1

2 2 Quad 20,700 16,900 12,000 3TA 1 1/4

37

Tuflex Roundslings

Tu

flex

60

USING TUFLEX ROUNDSLINGS

Protect Sling from Damage

ALWAYS protect roundslings from being cut or damaged by corners, edges and protrusions using protection sufficient for each application.

Do not ignore warning signs of misuse. Cut marks detected during any sling inspection serve as a clear signal that sling protection must be added or improved.

Exposure of slings to edges

Exposure of roundslings to edges with a radius that is too small can cause sling failure and loss of load

WARNING

Edges do not need to be “sharp” to cause failure of the sling. The following table shows the minimum allowable edge radii suitable for contact with unpro-tected roundslings. Chamfering or cutting off edges is not an acceptable substitute for fully rounding the edges to the minimum radius. Slings can also be damaged from contact with edges or burrs at the sling connection.

Measure the edge radius. The radius is equal to the distance between points A and B.

VerticalRated

Capacity(lbs.)

Minimum *Edge Radii

SlingWidth

At Load(in.)(in.)

EN30 3/16 1

EN60 1/4 1 3/8

EN90 5/16 1 3/4

EN120 5/16 1 7/8

EN150 3/8 2

EN180 7/16 2 1/8

EN240 7/16 2 5/8

EN360 1/2 3 1/4

EN600 11/16 4

EN800 3/4 4 5/8

EN1000 7/8 5 1/4

* For further information on minimum edge radii, contact Lift-All or see WSTDA RS-1.

Sling Hardware and Connections

Connection surfaces must be smooth to avoid abrading or cutting roundslings. Roundslings can also be damaged or weakened by excessive compression between the sling and the connection points if the size of the attachment hardware or connection area is not large enough to avoid this damage. Select and use proper connection hardware that conforms to the size requirements listed for choker and vertical hitches, or for basket hitches in the charts below.

TuflexSize

Single Part Double Part

Min. StockDia. (In.)

Min.Width(In.)

Min. Stock

Dia. (In.)

Min.Width(In.)

EN30 7/16 1 9/16 1 3/8

EN60 5/8 1 3/8 7/8 1 7/8

EN90 3/4 1 3/4 1 1/16 2 3/8

EN120 7/8 1 7/8 1 1/4 2 1/2

EN150 1 2 1 3/8 2 7/8

EN180 1 1/8 2 1/8 1 5/8 3

EN240 1 3/16 2 5/8 1 5/8 3 3/4

EN360 1 1/2 3 1/4 2 4 1/2

EN600 2 4 2 3/4 5 5/8

EN800 2 1/8 4 5/8 3 6 1/2

EN1000 2 1/2 5 1/4 3 1/2 7 3/8

Double Part(Basket) **

Refer to Page 24 for Temperature and Chemical Information

Minimum Edge Radii suitable for contact with unprotected polyester roundslings.

(Contact Lift-All, or see WSTDA RS-1 for information about how to calculate whether a smaller connection size is allow-able when tension on a roundsling is less than its capacity)

Single Part(Vertical)

Min. StockDia. or

Thickness

Min.Width

** For hardware connected to the body of Eye & Eye Tuflex, use the Double Part columns.

Minimum hardware dimensions suitable for use with roundslings.

Tuflex Roundslings

Tu

flex

DIRECT CONNECT HOOKS™

Features:

• Rugged − Both alloy steel hook and latch are forged forsuperior toughness.• Color coded − Hook color matches Tuflex color for easyidentification• Web-Trap design keeps sling in place, ready to use• Four hook sizes to match Tuflex sizes EN30 (Purple),EN60 (Green), EN90 (Yellow) and EN150 (Red)• Can be used with 1" and 2" web slings (see chart below)

Benefits:• Improves Safety – Color coding to match Tuflex colorsreduces chance of using wrong size hook • Saves Time – Quick connections; no tools needed • Saves Money – Adds versatility to your existing slings.No need to buy expensive hardware slings

DC Hooks are the quickest and easiest way to add hooks to Tuflex roundslings and web slings at your job site. No tools or extra parts needed.For Tuflex, just match the color coded hook to the same color Tuflex and you're ready to go. Rated capacities are the same for both the hook and the Tuflex.

61

Lift-AllPart #

ColorRatedCap. (lbs.)

TuflexWeb Slings

Weight(lbs.)

E(in.)

R(in.)

T(in.)Width Plies

DCH1 Purple 2,600 EN30 1 1 1.5 1 9/16 3 3/8 1

DCH2 Green 5,300 EN60 1 2 2.7 1 3/4 4 1 5/16

DCH3 Yellow 8,400 EN90 2 1 & 2 4.9 2 3/16 4 5/8 1 1/2

DCH4 Red 13,200 EN150 - - 9.9 2 3/4 5 3/4 1 3/4

E

RT

Tuflex Roundslings

Tu

flex

70

TUFLEX HARDWARE / BRIDLE SLINGS

Promotes Safety

• Bridles provide better load control and balance_

• Hardware avoids cutting and abrasion of sling at bearing points

Saves Money

• Reduced load damage - protected between pick-up point and crane hook

Saves Time

• Lighter weight and easier to use and store than wire rope or chain slings

• Sling hooks quickly connect to loads having hoist rings or eye bolts

How to Order

Specify:1. Number of legs - S (Single-1), D(Double-2), T(Triple-3), Q(Quad-4)2. Master Link - O (Oblong)3. Bottom Attachments - S (Sling Hook), O (Oblong)4. Tuflex Code5. Length of Assembly -Feet (Bearing point to bearing point)

Example:DOSEN90 X 10' is a double leg bridle, oblong master link, with sling hooks attached to each Tuflex EN90. Assembly length is 10 ft.

*See hardware dimension charts on page 91.Use sling leg calculator to determine length @ www.lift-all.com

Features, Benefits and Advantages

LegsTuflex Size

Rated Capacity (lbs.)for the following hitches Hardware*

Vertical Choker Basket Hook

MasterlinkStock Dia.

(in.)

EN30 2,600 2,100 5,200 2TA 1/2

EN60 5,300 4,200 10,600 4.5TA 3/4

EN90 8,400 6,700 16,800 7TA 3/4

EN120 10,600 8,500 21,200 11TA 3/4

EN150 13,200 10,600 26,400 11TA 1

EN180 16,800 13,400 33,600 15TA 1 1/4

EN240 21,200 17,000 42,400 22TA 1 1/4

EN360 31,000 24,800 62,000 20TC 1 1/2

EN600 53,000 42,400 106,000 30TC 2

EN800 66,000 52,800 132,000 40TC 2 1/4

EN1000 90,000 72,000 180,000 NA 2 1/2

One Leg @ 90°

All Legs @

Hook

MasterlinkStock Dia.

(in.)60° 45° 30°

EN30 2,600 4,500 3,600 2,600 2TA 1/2

EN60 5,300 9,100 7,400 5,300 4.5TA 3/4

EN90 8,400 14,500 11,800 8,400 7TA 1

EN120 10,600 18,300 14,900 10,600 11TA 1 1/4

EN150 13,200 22,800 18,600 13,200 11TA 1 1/4

EN180 16,800 29,100 23,700 16,800 15TA 1 1/2

EN240 21,200 36,700 29,900 21,200 22TA 1 1/2

EN360 31,000 53,700 43,800 31,000 20TC 2

EN600 53,000 91,800 74,900 53,000 30TC 2 1/2

EN800 66,000 114,300 93,300 66,000 40TC 3

EN1000 90,000 155,800 127,200 90,000 NA 3 1/4

EN30 2,600 6,700 5,500 3,900 2TA 3/4

EN60 5,300 13,700 11,200 7,900 4.5TA 1

EN90 8,400 21,800 17,800 12,600 7TA 1 1/4

EN120 10,600 27,500 22,400 15,900 11TA 1 1/2

EN150 13,200 34,200 27,900 19,800 11TA 1 1/2

EN180 16,800 43,600 35,600 25,200 15TA 1 3/4

EN240 21,200 55,000 44,900 31,800 22TA 2

EN360 31,000 80,500 65,700 46,500 20TC 2 1/4

EN600 53,000 137,600 112,400 75,900 30TC 2 3/4

EN800 66,000 171,400 139,900 99,000 40TC 3 1/2

EN1000 90,000 233,800 190,800 135,000 NA 4 1/4

EN30 2,600 9,000 7,300 5,200 2TA 3/4

EN60 5,300 18,300 14,900 10,600 4.5TA 1 1/4

EN90 8,400 29,100 23,700 16,800 7TA 1 1/2

EN120 10,600 36,700 29,900 21,200 11TA 1 1/2

EN150 13,200 45,700 37,300 26,400 11TA 1 3/4

EN180 16,800 58,200 47,500 33,600 15TA 2

EN240 21,200 73,400 59,900 42,400 22TA 2 1/4

EN360 31,000 107,300 87,600 62,000 20TC 2 3/4

EN600 53,000 183,600 149,900 106,000 30TC 3 1/2

EN800 66,000 228,600 186,600 132,000 40TC 4 1/4

EN1000 90,000 311,700 254,500 180,000 NA 4 3/4

DO

UB

LE

TR

IPL

EQ

UA

DS

ING

LE

QUADTRIPLE

SINGLEDOUBLE

Length

Wire Rope & Slings

Wir

e R

op

e

SWAGED THREADED STUDS

• Choice of studs made of specially selected carbon steel or stainless steel

• Custom OEM engineering available

Straight Threaded Studs

Turned Threaded Studs

* Nominal Breaking Strength based on 6 x 19 or 6 x 37 IWRC, EIP wire rope, with assembly used as a straight

tension member.

85

PartNo.

RopeDia(in.)

NominalBreakingStrength(tons)*

Dimensions (in.)

N.C.Thread

#

N.F.Thread

#

A After

SwageB

Approx. C D

STS-8 1/4 3.4 7/16 4 1/16 1 1/2 1/2 13 20

STS-10 5/16 5.3 9/16 5 1/4 1 7/8 5/8 11 18

STS-12 3/8 7.6 5/8 6 1/4 2 1/4 3/4 10 16

STS-14 7/16 10.2 3/4 7 5/16 2 5/8 7/8 9 14

STS-16 1/2 13.3 7/8 8 1/4 3 1 8 14

STS-18 9/16 16.8 1 9 1/4 3 3/8 1 1/8 7 12

STS-20 5/8 20.6 1 1/8 10 1/8 3 3/4 1 1/4 7 12

STS-24 3/4 29.4 1 1/4 12 13/16 4 1/2 1 1/2 6 12

STS-28 7/8 39.5 1 1/2 14 9/16 5 1/4 1 3/4 5 12

STS-32 1 51.7 1 3/4 16 1/4 6 2 4 1/2 12

STS-36 1 1/8 65.0 2 18 1/4 6 3/4 2 1/4 4 1/2 12

STS-40 1 1/4 79.9 2 1/4 20 1/4 7 1/2 2 1/2 4 12

PartNo.

RopeDia(in.)

NominalBreakingStrength(tons)*

Dimensions (in.)

N.C.Thread

#

N.F.Thread

#

A After

SwageB

Approx. C D

TTS-10 5/16 5.3 5/8 5 23/32 1 3/4 5/8 11 18

TTS-12 3/8 7.6 3/4 6 3/4 2 3/4 10 16

TTS-14 7/16 10.2 7/8 7 21/32 2 1/4 7/8 9 14

TTS-16 1/2 13.3 1 8 9/16 2 1/2 1 8 14

TTS-18 9/16 16.8 1 1/8 9 5/8 2 3/4 1 1/8 7 12

TTS-20 5/8 20.6 1 1/4 10 21/32 3 1/8 1 1/4 7 12

TTS-24 3/4 29.4 1 1/2 12 11/16 3 3/4 1 1/2 6 12

TTS-28 7/8 39.5 1 3/4 14 5/8 4 3/8 1 3/4 5 12

TTS-32 1 51.7 2 16 21/32 5 2 4 1/2 12

TTS-36 1 1/8 65.0 2 1/4 18 5/8 5 5/8 2 1/4 4 1/2 12

TTS-40 1 1/4 79.9 2 1/2 20 21/32 6 1/4 2 1/2 4 12

TTS-44 1 3/8 96.0 2 3/4 22 17/32 6 7/8 2 3/4 4 12

TTS-48 1 1/2 114 3 24 1/2 7 1/2 3 4 12

Wire Rope & Slings

Wir

e R

op

e

SWAGED SOCKET ASSEMBLIES

Features, Advantages and Benefits

Promotes Safety

• Achieves 100% of nominal rope breaking strength

• All assemblies are proof tested before shipment to customer

Saves Money

• Custom engineered assemblies are available for specific rigging needs

Open Swaged Sockets

Swage Socket Dimensions (Forged Steel)

* Values given apply to 6 x 19 or 6 x 37 IWRC, EIP rope when pen-dants are used for slings. When used as Boom Suspension System or other applications, contact Lift-All for ratings.

86

Closed Swaged SocketsOpen and Closed Swaged Sockets

RopeDiameter

(in.)

MinimumPendantLength

*VerticalCapacity

(tons)

1/4 11" .68

5/16 1' 3" 1.1

3/8 1' 3" 1.5

7/16 1' 8" 2.0

1/2 1' 8" 2.7

9/16 2' 0" 3.4

5/8 2' 0" 4.1

3/4 2' 5" 5.9

7/8 2' 10" 8.0

1 3' 2" 10

1 1/8 3' 7" 13

1 1/4 4' 0" 16

RopeDia(.in.)

Open Socket Closed Socket

R (in.)

O(in.)

D(in.)

Weight(lbs.)

W(in.)

K(in.)

Weight(lbs.)

1/4 1 5/32 11/16 11/16 .52 3/4 1/2 .38

5/16 1 11/32 13/16 13/16 1.12 7/8 11/16 .77

3/8 1 11/32 13/16 13/16 1.25 7/8 11/16 .72

7/16 1 1/2 1 1 2.08 1 1/16 7/8 1.42

1/2 1 1/2 1 1 2.08 1 1/16 7/8 1.35

9/16 1 5/8 1 1/4 1 3/16 4.48 1 1/4 1 1/8 2.92

5/8 1 5/8 1 1/4 1 3/16 4.75 1 1/4 1 1/8 2.85

3/4 2 1 1/2 1 3/8 7.97 1 7/16 1 5/16 4.90

7/8 2 3/8 1 3/4 1 5/8 11.30 1 11/16 1 1/2 6.63

1 2 3/4 2 2 17.80 2 1/16 1 3/4 10.30

1 1/8 3 1/8 2 1/4 2 1/4 27.50 2 5/16 2 14.50

1 1/4 3 1/2 2 1/2 2 1/2 35.75 2 9/16 2 1/4 20.75

Wire Rope & Slings

Wir

e R

op

e

WINCH LINES, HOIST LINES AND BUTTONS

Winch and Hoist Line Cables

Lift-All winch and hoist lines are made using 6 x 19 Wire Core ropes for better resistance to abrasion and crushing. Available with carbon hooks for large throat openings or alloy hooks for longer life.

Features, Advantages and Benefits

Promotes Safety

• Permaloc flemish eye splice for high strength efficiency

• Quality factory assembly avoids faulty termination

Saves Money

• Economical standard assemblies

• Heavy duty thimble in eye extends useful life

Saves Time

• No assembly time - ready to install

• Stainless steel latch keeps hook in proper place

Swaged Steel Buttons

Swaged steel buttons are designed for use as end stops on drum winding equipment such as hoists and winches.

After Swage Dimensions

Non-Standard Buttons available.

Running lengths of cable with thimbled eye ends available

87

Winch and Hoist Line Cables

6 x 19 Class-Bright (Uncoated)

RopeDiameter

(approx. in.) A B

1/4 5/8 1 1/8

5/16 3/4 1 1/2

3/8 7/8 1 3/4

7/16 1 2

1/2 1 1/8 2 3/8

9/16 1 1/4 2 5/8

5/8 1 3/8 2 7/8

3/4 1 1/2 3 1/2

7/8 1 3/4 4 1/8

1 2 4 3/4

1 1/8 2 1/4 5 1/4

1 1/4 2 1/2 5 7/8

1 3/8 2 3/4 6 1/2

1 1/2 3 7 1/8

Diameter(in.)

Breaking Strength

IWRC

3/8 14,000 lbs.

7/16 19,000 lbs.

1/2 25,000 lbs.

9/16 32,000 lbs.

5/8 39,000 lbs.

Wire Rope & Slings

Wir

e R

op

e

CABLE & COMPONENTS

Galvanized and Stainless Steel Cable

Galvanized Cable Coated with Clear Vinyl

Standard Wire Rope Thimbles

Heavy Duty Wire Rope Thimbles

89

GalvanizedCable

Construction

CableDiameter

(in.)

CoatedTo:(in.)

Wt./Reel(lbs.)

StandardLength

(ft.)/ReelNominal BreakStrength (lbs.)

7 x 7

1/16 3/32 7 500 480

3/32 3/16 7 250 920

1/8 3/16 10 250 1,700

7 x 19

1/8 3/16 10 250 2,000

3/16 1/4 19 200 4,200

1/4 5/16 28 200 7,000

RopeDia.(in.)

Dimensions(in.)

QuantityPer Bag

WeightPer Bag

(lbs.)A B C

1/8 1 5/16 11/16 1/4 100 4

3/16 1 5/16 11/16 5/16 100 4

1/4 1 5/16 11/16 3/8 100 4

5/16 1 1/2 13/16 7/16 80 3

3/8 1 5/8 15/16 1/2 80 4

7 x 7

CableDiameter

(in.)Wt./Reel

(lbs.)

StandardLength

(ft./Reel)

Nominal Break Strength(lbs.)

GalvanizedCable (GAC)

StainlessSteel Cable

(SSAC) Type304

1/16 5 500 480 480

3/32 9 500 920 920

1/8 15 500 1,700 1,760

7 x 193/32 9 500 1,000 920

1/8 15 500 2,000 1,760

5/32 12 250 2,800 2,400

3/16 17 250 4,200 3,700

1/4 25 250 7,000 6,400

5/16 38 200 9,800 9,000

3/8 52 200 14,400 12,000

RopeDia.(in.)

Dimensions(in.) Weight

Per 100 Pieces(lbs.)A B C

1/4 1 5/8 7/8 7/16 8

5/16 1 7/8 1 1/16 17/32 14

3/8 2 1/8 1 1/8 21/32 22

7/16 2 5/16 1 1/4 3/4 36

1/2 2 3/4 1 1/2 15/16 51

5/8 3 1/4 1 3/4 1 1/32 75

3/4 3 3/4 2 1 1/4 147

7/8 4 1/4 2 1/4 1 7/16 185

1 4 1/2 2 1/2 1 11/16 300

1 1/8 5 1/8 2 7/8 1 13/16 400

1 1/4 6 1/2 3 1/2 2 3/16 817

1 3/8 - 1 1/2 6 1/4 3 1/2 2 9/16 1,175

1 5/8 8 4 2 23/32 1,700

1 3/4 9 4 1/2 2 27/32 1.775

1 7/8 - 2 12 6 3 3/32 2,500

2 1/4 14 7 3 5/8 3,950

C

B

A

C

B

A

Wire Rope & Slings

Wir

e R

op

e

CABLE & COMPONENTSWire Rope Clips

The following instructions, supplied by the Wire Rope Technical Board, will result in an approximate 80% ef-ficiency rating when the clips are applied as instructed, on GAC, SSAC, RRL or RLL, 6 x 19 class or 6 x 37 class, fiber core or IWRC, non-Seale type construction wire rope. If applied to vinyl coated ropes, vinyl must first be stripped from clip connection area.

How to Apply Clips

1. Turn back the specified amount of rope from the thimble. Apply the first clip one clip width from the dead end of the wire rope (U-bolt over dead end - live end rests in clip saddle). Tighten nuts evenly to recommended torque.

2. Apply the next clip as near to the loop as possible. Turn on nuts firmly but do not tighten.

3. Space additional clips, if required, equally between the first two. Tighten on nuts - take up rope slack - tighten all nuts evenly on all clips to recommended torque.

4. NOTICE! Apply the initial load and retighten nuts to the recommended torque. Rope will stretch and be reduced in diameter when loads are applied. Inspect periodically and retighten to recommended torque.

Failure to make a termination in accordance with aforementioned instructions, or failure to periodically check and retighten to the recommended torque, may result in death or serious injury.

Right Way - For Maximum Rope Strength

Wrong Way - Clips Staggered

Wrong Way -

Clips Reversed

Drop Forged Wire Rope Clips

90

WARNING

Malleable Wire Rope Clips

Note: Malleable clips are not to be used for overhead lifting. Use in light duty, non-critical applications only.

RopeDia.(in.)

MinimumNumberof Clips

RopeTurn-back

(in.)

Torque(ft./lbs.)

QuantityPer Bag

WeightPer Bag

(lbs.)

1/8 3 5 3 200 10

3/16 3 6 5 150 12

1/4 3 7 15 100 12

5/16 3 8 15 100 15

3/8 3 10 30 50 11

RopeDia. (in.)

MinimumNumberof Clips

RopeTurn-back

(in.)Torque(ft./lbs.)

WeightPer 100 Pieces

(lbs.)

1/8 2 3 1/4 4 1/2 6

3/16 2 3 3/4 7 1/2 10

1/4 2 4 3/4 15 18

5/16 2 5 1/4 30 30

3/8 2 6 1/2 45 47

7/16 2 7 65 76

1/2 3 11 1/2 65 80

9/16 3 12 95 104

5/8 3 12 95 106

3/4 4 18 130 150

7/8 4 19 225 212

1 5 26 225 250

1 1/8 6 34 225 280

1 1/4 7 44 360 415

1 3/8 7 44 360 460

1 1/2 8 54 360 530

Wire Rope & Slings

Wir

e R

op

e

SLING ATTACHMENTS, HOOKS, ETC.

Alloy Oblong Master Links • Drop forged through 1",

formed and welded in larg-er sizes.

Screw Pin Anchor Shackles

• Carbon Shackle, Alloy Pin

• Heat treated and tempered

• Hot dip galvanized

Note: This chart shows standard capacities and dimensions, but may vary de-pending on source of supply. Specify required capacity if critical.

Sliding Choker Hooks

• Speeds rigging time of bun-dled loads.

• Reduces sling wear when used with thimbles.

When using on multi-part slings, contact Lift-All for ad-ditional information.

91

WARNING * Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases.Slings should not be used at angles of less than 30°. Refer to Effect of Angle chart page 12.Rated Capacity Design Factor 5:1.

Rated Capacity* Dimensions (in.) WeightEach(lbs.)Tons Lbs. C L W

3.05 6,100 1/2 5 2 1/2 .9

6.6 13,200 3/4 6 3 2.5

11.2 22,400 1 8 4 5.8

16.2 32,400 1 1/4 8 3/4 4 3/8 9.2

24.5 49,000 1 1/2 10 1/2 5 1/4 16

36.7 73,400 1 3/4 12 6 25

44.4 88,800 2 14 7 37

62.6 125,200 2 1/4 16 8 54

93.9 187,800 2 3/4 16 9 85

HookNo.

(Rope Dia.)

Rated Capacity*

(tons)

Dimension(in.)

Weight(lbs.)H

3/8 1.3 4 1/4 1.3

1/2 1.7 4 13/16 1.8

5/8 2.5 5 15/16 4

3/4 4.0 6 7/16 4.5

7/8 - 1 7.5 8 1/8 10

1 1/8 - 1 1/4 11.5 11 5/8 26

1 3/8 - 1 1/2 15 14 1/2 50

Shackle SizeDim. C

(in.)

Rated Capacity* (tons) Dimensions (in.) Weightper 100 Pieces

(lbs.)CM Others B L P W

3/16 1/2 1/3 5/8 7/8 1/4 3/8 6

1/4 3/4 1/2 13/16 1 1/8 5/16 15/32 12

5/16 1 3/4 7/8 1 1/4 3/8 17/32 20

3/8 1 1/2 1 1 1/16 1 7/16 7/16 21/32 30

7/16 2 1 1/2 1 1/4 1 11/16 1/2 23/32 50

1/2 3 2 1 7/16 1 15/16 5/8 13/16 75

5/8 4 1/2 3 1/4 1 3/4 2 13/32 3/4 1 1/16 130

3/4 6 1/2 4 3/4 2 2 27/32 7/8 1 1/4 225

7/8 8 1/2 6 1/2 2 5/16 3 5/16 1 1 7/16 350

1 10 8 1/2 2 9/16 3 3/4 1 1/8 1 11/16 500

1 1/8 12 9 1/2 2 15/16 4 1/4 1 1/4 1 13/16 700

1 1/4 14 12 3 1/4 4 11/16 1 3/8 2 1/32 950

1 3/8 17 13 1/2 3 1/2 5 1/4 1 1/2 2 1/4 1250

1 1/2 20 17 3 3/4 5 3/4 1 5/8 2 3/8 1720

1 5/8 24 24 4 3/8 6 1/4 1 3/4 2 5/8 2350

1 3/4 30 25 5 7 2 2 7/8 2770

2 35 35 5 3/4 7 3/4 2 1/4 3 1/4 3900

C

L

W

H

C

W

L

P

B

Wire Rope & Slings

Wir

e R

op

e

SLING ATTACHMENTS, HOOKS, ETC.

Rigging Eye Hooks

• Drop forged alloy steel

• Lightweight hooks for heavy duty lifting

Stainless steel latch available.

Swivel Rigging Eye Hooks

• Hook swivels beneath eye

• Drop forged alloy steel

Latchlok Eye Hooks

• Heavy duty latch with lock prevents accidental opening

• Drop forged alloy steel

Swivel Latchlok Hooks With Bushings

• Hook swivels beneath the eye

• Heavy duty latch with lock prevents accidental open-ing

• Drop forged alloy steel

Sorting Hooks

• Drop forged alloy steel, for maximum strength and toughness.

92

WARNING *

Working load limit at tip - 2 ton.Working load limit at bottom - 7 1/2 ton.

Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases.Slings should not be used at angles of less than 30°. Refer to Effect of Angle chart page 12.Rated Capacity Design Factor 5:1.

Rated Capacity Dimensions (in.) Weight Each (lbs.)Tons Lbs. C E R T

1.7 3,400 7/16 1 3/32 5 3/8 1 5/8 2.1

3.5 7,000 19/32 1 3/8 6 21/32 1 9/32 3.9

6.0 12,000 25/32 1 9/16 8 25/32 2 29/32 8.8

9.0 18,000 1 1/32 2 10 11/32 3 3/16 14

Dimensions (in.) Weight (lbs.)C (Rad.) D E R

5/8 2 13/16 1 7/16 7 11/32 6.8

Rated Capacity Dimensions (in.) Weight Each (lbs.)Tons Lbs. B C E R T

1.7 3,400 1 11/32 5/8 1 1/2 7 5/32 1 5/8 3.5

3.5 7,000 1 5/8 3/4 1 3/4 8 23/32 2 1/4 4.8

6.0 12,000 1 3/4 15/16 2 11 3/16 2 29/32 10.6

9.0 18,000 2 3/8 1 2 3/4 13 13/32 3 3/16 17.0

Rated Capacity Dimensions (in.) Weight Each (lbs.)Tons Lbs. B C E R T

1 2,000 1 1/8 3/8 1 1/4 4 5/8 15/16 1.1

1 1/2 3,000 1 3/8 1/2 1 1/2 5 7/16 31/32 1.6

2 4,000 1 21/32 5/8 1 3/4 6 1/4 1 1/16 2.5

3 6,000 1 21/32 11/16 1 3/4 6 1/2 1 5/32 3.2

5 10,000 1 25/32 3/4 2 7 17/32 1 13/32 5.4

7 14,000 2 3/8 1 2 3/4 9 21/32 1 11/16 10.6

Rated Capacity Dimension (in.) Weight Each (lbs.)Tons Lbs. C E R T

1 2,000 3/8 3/4 3 1/8 15/16 .63

1 1/2 3,000 7/16 7/8 3 21/32 31/32 .85

2 4,000 1/2 1 1/8 4 3/32 1 1/16 1.4

3 6,000 5/8 1 1/4 4 21/32 1 3/16 1.9

4 1/2 9,000 3/4 1 9/16 5 25/32 1 1/2 3.7

7 14,000 15/16 2 7 5/16 1 25/32 7.3

11 22,000 1 1/8 2 7/16 9 1/32 2 3/8 15

15 30,000 1 1/4 2 27/32 10 7/32 2 1/2 22

22 44,000 1 9/16 3 1/2 12 13/16 3 5/16 38

20 40,000 1 3/4 3 1/2 14 1/16 4 60

30 60,000 2 3/16 4 15/16 20 1/8 4 3/4 148

40 80,000 2 17/32 5 23 23/32 5 3/4 227

T

E

B

R

E

R

E

R

C

D

T

B

R

E

R

E

T

T

Allo

yC

arbo

n

Carbon hooks available.

C

C

C

C

LiftAlloy Chain Slings

Lif

tAllo

y C

hai

n

104

Cradle Grab Eye Hook / Code G

Foundry Hook / Code F

WARNING *

** NOT cradle typeNote: Non-Cradle Grab Hooks are available upon request.

Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°.Refer to chain chart page 99 and Effect of Angle chart page 12.

Grade

Chain Size (in.)

Rated Capacity*

(lbs.)

Dimensions (in.) Weight

Each(lbs.)B D E I R T

100 7/32 2,700 1.19 1.50 .55 .92 2.20 .31 0.4

100 9/32 4,300 1.38 1.91 .63 1.06 2.57 .36 0.6

100 3/8 8,800 1.78 2.86 .78 1.38 3.28 .47 1.4

100 1/2 15,000 2.28 3.63 1.03 1.81 4.22 .59 3.1

100 5/8 22,600 2.75 4.08 1.25 2.25 4.78 .75 4.4

100 3/4 35,300 3.50 5.23 1.50 2.88 6.67 .88 8.8

80 7/8 34,200 3.75 5.69 1.75 3.00 6.50 1.00 10

80 1 47,700 4.31 7.00 1.88 3.88 8.09 1.19 21

80 1 1/4 72,300 5.38 8.50 2.25 2.50 10.50 1.50 40

Grade

Chain Size (in.)

Rated Ca-pacity* (lbs.)

Dimensions (in.) Weight

Each(lbs.)B E I P R T

100 9/32 4,300 1.56 .63 1.00 1.24 4.75 2.50 2.4

100 3/8 8,800 2.00 .75 1.27 1.50 5.75 3.00 4.5

100 1/2 15,000 2.50 1.00 1.50 1.75 6.88 3.50 7.1

100 5/8 22,600 3.00 1.25 1.81 2.03 8.06 4.00 12

100 3/4 35,300 3.50 1.50 2.20 2.56 9.25 4.50 20

80 7/8 34,200 4.00 1.75 2.25 2.78 10.38 5.00 26

80 1 47,700 4.50 2.13 2.59 3.03 11.56 5.50 37

80 1 1/4 72,300 5.13 2.38 3.17 3.81 12.88 6.00 58

E

E

I

T

I

D

R

T

R

P

HOOKS, MASTER LINKS, ETC.

B

B

LiftAlloy Chain Slings

Lif

tAllo

y C

hai

n

HOOKS, MASTER LINKS, ETC.

Latchlok Eye Hooks / Code L

105

Grade 100

Grade 100

Grade 100

Clevis Sling Hook with Optional Latch / Code S

Clevis Cradle Grab Hook / Code G

Chain Size (in.)

Rated Capacity*

(lbs.)

Dimensions (in.) Weight

Each(lbs.)D L P R

9/32 4,300 3.53 0.83 1.11 3.75 1.2

3/8 8,800 4.54 1.06 1.51 4.58 2.2

1/2 15,000 5.48 1.38 1.61 5.59 4.2

5/8 22,600 6.20 1.69 1.92 6.44 6.6

3/4 35,300 7.06 2.09 2.08 7.50 11

Chain Size (in.)

Rated Capacity*

(lbs.)

Dimensions (in.) Weight

Each(lbs.)D R T

9/32 4,300 2.18 1.86 0.38 0.6

3/8 8,800 2.71 2.47 0.47 1.3

1/2 15,000 3.65 3.04 0.65 2.1

5/8 22,600 4.5 3.75 0.79 4.2

Chain Size (in.)

Rated Capacity*

(lbs.)

Dimensions (in.) Weight

Each(lbs.)D E R T

9/32 4,300 3.77 1.09 5.37 1.64 2.1

3/8 8,800 4.74 1.36 6.65 2.27 3.9

1/2 15,000 6.26 1.55 8.77 2.91 8.8

5/8 22,600 7.37 2.00 10.35 3.20 14

Design factor @ 4:1

E

T

T

L

P

R

R

D

R

D

D

LiftAlloy Chain Slings

Lif

tAllo

y C

hai

n

HOOKS, MASTER LINKS, ETC.

106

Oblong Master Link / Code O

Chain Sling Eye Hook with Optional Latch / Code S

Note: When ordering, specify latch if desired.

* If sub-assemblies are used, inside dimensions may be reduced. Contact Lift-All if critical.

Grade

Chain Size (in.)

Rated Capacity*

(lbs.)

Dimensions (in.) WeightEach(lbs.)D E I L P R T

100 7/32 2,700 3.04 .75 .94 .83 .94 3.75 .97 0.7

100 9/32 4,300 3.50 .75 .73 1.06 1.05 3.75 1.19 1.1

100 3/8 8,800 4.33 .94 .95 1.31 1.28 4.78 1.44 1.9

100 1/2 15,000 5.50 1.13 1.17 1.63 1.66 5.69 1.78 4.5

100 5/8 22,600 6.34 1.31 1.44 1.75 2.19 6.50 2.03 7.3

100 3/4 35,300 7.83 1.50 1.69 2.19 2.51 7.81 2.50 11

80 7/8 34,200 8.59 1.69 1.94 2.38 2.84 8.75 2.78 18

80 1 47,700 9.59 1.88 2.14 2.88 3.09 9.88 3.13 23

80 1 1/4 72,300 11.56 2.31 2.62 3.41 3.89 11.50 3.88 36

Link Size *(in.)

Type & Size of Chain Slingon which used

Weight Each (lbs.)

Diameter Material

C

Inside Width

W

Inside Length

LSingle Double Triple Quad

13/32 1 1/2 3 7/32 7/32 - - 0.3

1/2 2 1/2 5 9/32 9/32 7/32 7/32 0.9

3/4 3 6 3/8 3/8 9/32 9/32 2.5

1 4 8 1/2 or 5/8 1/2 3/8 3/8 5.8

1 1/4 4 3/8 8 3/4 3/4 5/8 1/2 1/2 9.2

1 1/2 5 1/4 10 1/2 7/8 3/4 5/8 5/8 16

1 3/4 6 12 1 7/8 3/4 3/4 25

2 7 14 1 1/4 1 7/8 7/8 37

2 1/4 8 16 - 1 1/4 1 1 54

2 3/4 9 16 - - 1 1/4 1 1/4 85

C

E

P

I

T

L

W

L

R

D

LiftAlloy Chain Slings

Lif

tAllo

y C

hai

n

HOOKS, MASTER LINKS, ETC.

WARNING 107

*

See page 136 for J-Hooks and Custom Engineered Lifting Devices.

Mechanical Coupling Links

Plate Hook

S Hook

Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°.Refer to chain chart page 99 and Effect of Angle chart page 12.

Grade

Chain Size (in.)

Rated Capacity*

(lbs.)

Dimensions (in.) Weight

Each(lbs.)A B C E

100 7/32 2,700 .35 1.19 .69 .54 0.27

100 9/32 4,300 .41 1.94 .70 .59 0.27

100 3/8 8,800 .55 2.99 1.13 .93 0.87

100 1/2 15,000 .75 3.97 1.43 1.12 1.86

100 5/8 22,600 .87 4.50 1.70 1.35 3.14

100 3/4 35,200 1.07 5.36 2.09 1.54 5.80

80 7/8 34,200 1.05 5.25 1.80 1.92 6.30

80 1 47,700 1.25 6.00 2.31 2.37 8.95

80 1 1/4 72,300 1.53 6.81 2.17 2.70 16.40

Stock Dia.(in.)

Rated Capacity*

(lbs.)

Dimensions (in.) Weight

Each(lbs.)A B F R

9/32 210 4 1/2 1 1/8 1 1/8 9/16 0.15

3/8 410 6 1 1/2 1 1/2 3/4 0.35

1/2 870 7 1/2 2 2 1 0.82

5/8 1,120 9 2 1/2 2 1/2 1 1/4 1.6

3/4 1,730 10 1/2 3 3 1 1/2 2.6

7/8 2,370 12 3 1/2 3 1/2 1 3/4 4.2

1 2,920 13 4 4 2 6.0

1 5/32 3,150 15 4 1/2 4 1/2 2 1/4 9.3

1 1/4 4,450 16 5 5 2 1/2 12

1 3/8 6,100 17 5 1/2 5 1/2 2 3/4 15

1 1/2 6,250 18 6 6 3 20

Chain Size (in.)

Rated Capacity*

(lbs.)

Dimensions (in.)

WeightEach(lbs.)A B E R W

9/32 4,200 2.00 1.75 1.00 3.68 2.50 2.8

3/8 7,400 2.63 3.00 1.12 6.38 2.75 5.7

1/2 13,000 3.50 4.00 1.50 7.37 3.50 13

5/8 20,400 4.38 5.00 1.88 9.25 5.00 27

3/4 30,000 5.18 6.00 2.25 10.88 5.75 42

7/8 40,000 6.00 7.00 2.63 13.68 6.00 65

* Ratings are per hookDo not use plate hooks at angles other than 60° from horizontal.Do not attempt to lift using only one plate hook.

R

W

E

A

B

R

A

E

B

A

C

C

B

F