WE800
description
Transcript of WE800
无线内窥镜 WIRELESS INSPECTION CAMERA
使用说明 INSTRUCTION
Model: WE800
1.Features:
This portable wireless inspection camera is our company newly-developed
simple and convenient inspection instrument. It’s a new product combined the
technology of electronics, optics and 2.4GHz wireless. It’s very small size and
light weight, very convenient to carry; can be applicable in the dangerous &
complicated surroundings, like high-altitude working. It’s easy operated and
powered by high capacity Li-battery with 1.5 hours continuous working time.
High brightness LED/IR offers long visible range up to 8 meters. Moreover, it
offers high definition video and good performance. If it works with our wireless
DVR-TE968H, users can as inspect according to video, as record. Look over
some recorded video repeatedly. If the video is not satisfactory, users can delete
it and rerecord. DVR memory is large up to 32GB.If it works with wireless USB
receiver, users can view instant video in computer, and record, edit and print the
inspection report.
-1-
2. Application
Auto engine and gearing inspection; Medical inspection, like dental, skin
disease, gynecology, etc.; All kinds of pipe & tube, building inspection;
Antiterrorism search & rescue; Safety inspection; Archeology, etc.
3. Notice
1. Please don’t charge the camera with other AC adapter;
2. Please don’t charge the camera for too long time.
4. Structure Drawing
Front-view
-2-Structure Drawing
Back-view
5. Usage Diagram
Inspection Camera with Wireless DVR
-3-Usage Diagram
Inspection Camera with Wireless USB receiver
6. Operation
1) Charge
Plug AC adapter to DC socket of camera, Charge Indicator turns red.
After full charged, the red indicator will turn off automatically.
-4-Operation
2) Power ON
Press Power ON/OFF button on the rear of camera continuously
about 3 seconds to power on the camera. LED light on, camera
starts to work. Point the camera to the inspection objects and at the
same time power on any 2.4GHz wireless receiver (e.g.
DVR/monitor/computer) to receive and record instant video.
3) LED/IR lamps ON/Highlight/OFF
When the camera and LED/IR lamps are on, press Power ON/OFF
button once, lamps highlight; press again, lamps turn off. It cycles in
this turn: lamps on, lamps highlight, lamps off.
4) Power OFF
When camera is on, continuously press the Power ON/OFF button 3
seconds, lamps turn off and camera stops working.
-5-7. Specification
Frequency 2414Mhz(CH1)
RF Output Power 50mW (300 feet in line of sight)
Total Pixels PAL:720 X 576 NTSC:720 X 480
Minimum Illumination 0.01Lux / F1.2
Lens Focus 1-100cm (adjustable)
View Angel 90°
Light
Source
LED 2200mcd x 6 Range of LED lamp: 5 meters
IR/940nm 70mW x 6 Range of IR940 lamp: 5 meters
IR/850nm 70mW x 6 Range of IR850 lamp: 8meters
Li-battery Capacity 380MAH
Working Time 1.5 hours
Charge Time 1.5 hours
Voltage DC 5V
Current Lamp off:160mA Lamp on: 260mA Lamp highlight:300mA
Weight 35g
Size(DXL) 20mm X 84mm
-6-一、产品特点:
便携式无线内窥镜是本公司新开发的简便式探测仪器。它是电子、光学、无线技术相结合的新产品。设备小巧、携带方便,可用于高空等艰难复杂环境。操作容易,高性能锂电池供电,现场无须电源可超长待机 1.5 小时,高亮的 LED/IR 技术,可视范围广(可达 8 米)并具有图像清晰,性价比高等特点。配无线 DVR-TE968H 使用,可现场一边对照视频检测,一边存储录像,反复观看某段录像效果,不满意可删除重新录制,存储容量高达 32GB;配无线 USB 接收机使用,电脑即时观看检查对象,并可存储、编辑及打印检测报告。 二、应用领域:
汽车发动机和传动装置内部差异情况检查;牙科、皮肤和妇科等医学检查;排气通道等各种管子管道和建筑检修;反恐搜救;安全检查;考古发现等多种领域。三、注意事项:
1. 请勿使用其它适配器给内窥镜充电;
2. 请勿过长时间给内置锂电池充电;-7-
四、结构及部件
图 1:正面
图 2:背面
-8-五、系统连接图
图 3: 内窥镜与无 DVR 无线连接
图 4:内窥镜与电脑无线连接
-9-六、使用方法
1、充电:
充电器插入 DC 口。充电指示灯红灯亮。充满电后,指示灯红灯自动熄灭。2、开机按背部开关按钮三秒开机,LED/IR 辅助照明灯亮,本机开始工作,并处于 CH1。把摄像头孔对准检测目标,此时可用任何 2.4GHz
无线接收器(如 DVR/监控器/ 电脑)接收和实时录制图像。3、LED/IR辅助照明开关在开机和 LED/IR 辅助照明灯亮的状态下,按背部开关按钮一下,灯高亮,再按一下,灯灭。 灯亮、灯高亮、灯灭,如此循环。4、关机在开机状态下,按背部开关按钮三秒关机,LED/IR 辅助照明灯灭,本机停止工作。
-10-
七、产品规格: WE800
频率 2414Mhz(CH1)
RF 输出功率 50mW (无障碍距离 300 英尺)
像素 PAL:720 X 576 NTSC:720 X 480
镜头焦距 1-100cm (可调)
最低照度 0.01Lux / F1.2(星光级)
视角 90°
光
源
LED 2200mcd x 6 LED灯开启 5 米IR/940nm 70mW x 6 IR940灯开启 5 米IR/850nm 70mW x 6 IR850灯开启 8 米
锂电容量 380mAH
工作时间 1.5 小时充电时间 1.5 小时工作电压 DC 5V
工作电流 灯灭:160mA 灯亮:260mA 灯高亮:300mA
重量 35g
尺 寸 ( 直 径 X 20mm X 84mm
-11-