We substantialize your needs and offer optimal solutions.pbt.proffman.se/upload/98303770.pdf · As...
Transcript of We substantialize your needs and offer optimal solutions.pbt.proffman.se/upload/98303770.pdf · As...
We substantialize your needs and offer optimal solutions.
One of Swedens leading mechanical engineering agencies within the technical area of HVAC design.
2014
As the winds of the future blow some build windbreaks while others build windmills.
Content
Business concept, strategy, quality and
environmental policies 6
Computer systems and applications 8
Energy efficiency 10
Our services 12
Technical areas of expertise 14
Economic aspects – Facts and financial ratio 18
Client credentials – projects 202
PHARMACEUTICAL, CONSUMER GOODS AND ELECTRONIC INDUSTRIES
LABORATORIES, CLEANROOMS AND BIOSAFETY LABORATORIES
Welcome to a presentation of PB teknik AB, one of Swedens leading consultan-
cy agencies in HVAC design.
Drafting, investigation, calculation and inspection are all parts of our broad
range of services.
Our most important resource is our staff of about 30 co-workers, all of them
ready to help You substantialize your wishes and needs to objectively choose
a system solution and level so that You are offered the best possible finished
product.
Our education policy at PB teknik assures that we are always up to date on
regulatory requirements as well as the latest technology.
On this spreadsheet you can see the range of services PB teknik offers.
3
H
OSPITALS AND SCHOOLS SOLAR MODULES AND HEAT PUMPS
SHOPPING STORES AND OFFICE BUILDINGS
4
H
OSPITALS AND SCHOOLS SOLAR MODULES AND HEAT PUMPS
SHOPPING STORES AND OFFICE BUILDINGS
HOTELS AND RESTAURANT KITCHENS
RECREATIONAL FACILITIES MULTI-FAMILY RESIDENTIA
L HOUSIN
G
5
Quality and environmental awareness shape our entire business.
26
Our responsibility as a business is to reach the quality- and environmental go-
als of today and tomorrow. PB teknik has stood for creativity and knowledge
from the first day the company was founded and our services help to imple-
ment and realize our customers’ high standards and requirements. PB teknik
inspires confidence, provides security and added value for our customers.
”Quality and environmental consciousness is part of our business idea.”
Patrik Bergström and Torbjörn Lång, owners of PB teknik AB
PB teknik was founded by Patrik Bergström in 1996,
and was expanded by fellow owner Torbjörn Lång two
years later. Since 1998 they are co-owners of equal
parts of PB teknik AB. The company has consistently
expanded since then and has approximately 30 em-
ployees as of today.
Business concept and strategyPB teknik’s business concept is to offer consulting
services within HVAC design, cooling and system con-
trolling. We take on projects involving everything from
pilot studies, investigative case studies and system
solutions to drafting of mechanical system drawings
and record drawings to name a few.
We also perform controls, installation coordination
and inspections, mandatory ventilation checks and
EPC (Energy Performance Certification) for residential
housing as well as energy-efficiency inspections.
Quality policyPB teknik stands for creativity and knowledge. We en-
sure to consistently aim to meet customers’ requests,
implement and fulfill our customers’ high standards
and requirements and give added value for our custo-
mers.
Environmental policyPB teknik helps to substantialize the wishes and needs
of the client by unbiasedly choosing resource-efficient,
and environment-friendly technical solutions with a
high sense of economical awareness.
Doing so, we are preventing environmental pollu-
tion and contributing to a better environment.
We live up to our commitments in our quality and
environmental policy by having our internal manage-
ment system routines monitor the development and
continual improvement processes of our consultancy
management as well as making sure accordance with
applicable laws and requirements are followed.
Quality- and environmental management systemPB teknik works after a pronounced quality- and
environmental policy with a process-based quality-
and environment management system that is certified
according to ISO 9001 and ISO 14001 standards.
7
Our highly effective CAD- and computer systems are the heart and brain of our operational business.
8
PB teknik continuously works with CAD, BIM and computer software develop-
ment to guarantee qualified and effective consultancy services.
We use modern applications and all of our employees work with their own PC-
client in Windows 7.
All of our employees work in their own PC client in
Windows 7 environment and the computers are linked
together in a PC network with 100 Mbits switches. Our
server is used for program, data- and back-up security.
The company is connected to the Internet via a fixed
link on 100 Mbps, which ensures fast and secure con-
nectivity.
Our computer software programsIn addition to Microsoft Office, we use the CAD
software program AutoCad 2007 – 2012 to produce
technical drawings.
We also use various HVAC application programs
such as CADVent 6, MagiCad for Revit and CQ-
TOOLS for Revit.
We use NavisWork Manage for coordination.
Energy-efficiency calculations play a major role in our
services and we use the competent software applica-
tion program IDA ICE 4 to do it.
Sektionsdata and Wikells spreadsheet-programs
connected to CAD modules are used for calculation.
Data security – a customer requirementSecurity is a very important cornerstone of our busi-
ness.
We want our clients to be able to trust our data
systems and routines.
This means regular and systematic back-up on all of
our intranet server disks every day.
All of our PC-clients have virus protection programs
installed which are continuously updated with the
latest versions.
Our computers and servers are protected by a fire
wall that filters all data traffic
External connectionWe offer all our employees the opportunity to work
out-of-office via a VPN-client.
We also use Netviewer and Skype to enable long
distance video conferences.
”We use the most powerful software applications while calculating, computing and using CAD.”
Jeff Kullhammar, IT Manager.
9
Our environmental awareness stretches over numerous dimensions.
10
”Energy awareness is fundamental in our consulting services.”
Torbjörn Lång, Certified Energy Expert.
Early on in a project, we at PB teknik analyze and discuss with the client the
opportunities to design and draft as energy-efficient as possible.
We minimize cooling and heating needs and utilize all available technology
to minimize energy consumption with as little environmental impact as pos-
sible. We design, analyze and specify as well as perform instrumentation and
measurement for HVAC-systems. Energy-efficiency analysis is performed in PB
tekniks energy calculation software.
PB teknik assist their clients in lowering energy costs
through effectively analyzing and designing require-
ments and surrounding circumstances.
Examples of HVAC design and draft solutions we
have resolved:
Pressure control and air flow control schematics
are used to optimize and lower pressure needs in
duct and piping systems through analysis in our CAD
programs. We see to it that ventilation and climate
solutions are demand-controlled, and we choose
energy-efficient motors.
We minimize cooling needs through solar heat
protection and controlling.
We take advantage of ground-, water-, geother-
mal-, aero thermal- and waste heat as heat sources
for heat pumps as well as the employment of storing
heating/cooling in structure foundations and the use
of ice-storing and boreholes amongst other things.
We have cutting-edge expertise and knowledge
when it comes to solar thermal collectors for heating
as well as water heating.
Analysis of climate issues in house property through CFD
calculation.
11
From pilot studies tooperational control.
12
PB teknik offers consulting services within the areas of HVAC design, cooling,
gas heating, medical gas piping systems, steam piping systems, system con-
trolling and energy efficiency solutions. Our assignments focus mainly on
HVAC-design consultations, from pilot studies to finished projects.
”Contact us at PB teknik, we’ll help you lower your energy costs with minimal environmental impact.”
Håkan Ekvall, project coordinator & Torbjörn Lång, project manager
We conduct pilot studies, should our client request
one, in the initial phase of a project.
In this pilot study we estimate technical and envi-
ronmental aspects, as well as the financial and tempo-
ral development in order to determine the possibilities
for best profitability.
Our consultants investigate the extent of the project
and how much time it will take.
HVAC consultation, quality and coordinationPB teknik offers extensive ocular status inspections of
building components and energy needs for an inven-
tory and analysis of information.
PB teknik also offers BAS-P/BAS-U (Construction
work planning coordinators/Construction work execu-
tion coordinators) as well as experts in the technical
fields of ventilation and energy.
Our responsibilities also include making sure that
the quality in a premise corresponds to and is in consis-
tency with our customers’ requirements.
Investigative inspectionsWe have project managers, inspectors and control-
lers who coordinate and control such things as the
mechanical system drawings, exploded view drawings,
construction documents as well as supervise project
execution to ensure accurate conduct.
Do you need a mandatory ventilation inspection or
an EPC (Energy Performance Certificate)?
PB teknik executes, investigates and optimizes dif-
ferent strategies for energy conservation.
We also produce as-fitted drawings and archive
them digitally.
Overall, the common denominator for all stages
of our projects involve complete budgetary control,
calculations, test runs and education.
In the next section we explain, in more detail, the
consulting services we offer.
13
Some of our selected areas of technology.
Mandatory ventilation inspectionA statutory inspection implemented to ensure that
the ventilation of a building works as intended so that
the people who live or work there are able to breathe
fresh air. Mandatory ventilation inspections should be
conducted at regular intervals depending on the type
of building and the existing ventilation system.
EPC (Energy Performance Certification)There is a legal requirement for residential buildings,
facilities, and special buildings that are larger than
1,000 m2 as well as villas for sale and rent that an EPC
is performed. PB teknik provides suggestions for im-
provement and cost estimates for corrective measures.
ThermographyPB teknik assist clients in finding actions to improve
the indoor climate and decrease energy consumption.
Through thermography we can discover hidden pipes
and ducts in the floors, walls and ceilings.
Helping to avoid, in that way, unpleasant surprises
caused by the overheating of electrical installations.
An annual inspection can also reduce insurance costs.
Energy optimizationAdaption to the highest efficiency performance, the
right temperature as well as the adaption of operating
hours for optimal heat recovery.
PB teknik can provide you with a cost estimate as
well as implement corrective measures to optimize
energy consumption.
14
Radon measurementThe Department for Health and Human Services and the
National Board of housing, building and planning gui-
delines suggest that radon gas levels should not exceed
200 Bq/m3.
The WHO’s recommended guideline value is 100 Bq/m3.
Radon measurement should be performed during the
colder months of the year, i.e. from October through
April. The measuring period should last at least 2
months, preferably 3.
15
PB teknik operates over a wide field of technology with a vast range of operational areas.PB teknik operates over a wide field of technology
with a vast range of operational areas. PB teknik is a
consultancy firm with extensive technical expertise,
within HVAC-design including industrial HVAC.
We have professional specialist competence within
web/distance monitoring and controlling (remote
administration software), cooling for ice rinks, water
purification and steam-piping systems to name a few.
Industrial hygiene• Sanitary Engineering externally
and within properties
• Surface water, waste water and
tap water systems
• Grease and oil water-separation
technology
• Booster pump systems
• On Site wastewater treatment
systems
• Sprinklers
Cooling• Cooling machines, remote cooling• Cooling centers, cooling towers
and free cooling systems.• Cooling for data centers• Freezer rooms, cold rooms and
cleanrooms• Lake water cooling• Commercial cooling systems• Air conditioning• Ice rinks and ice arenas• Industrial cooling systems• Geothermal cooling
Ventilation• Cooling, heating, recycling,
humidifying, dehumidifying and
filtration
• Chip suction plants
• Central vacuum cleaners
• Industrial facilities
• Swimming facilities
• Waste gas management facilities
Compressed air and gas systems• Compressed air
• Industrial gas systems used in phar-
maceutical industry, biotechnology,
electronics and petrochemicals etc.
• Medical piped gas systems for
hospitals and health care facilities.
• Coal gas, biogas and liquefied
petroleum gas (LPG)
Heating• District heating plants, centralized
water heaters
• Oil-, electricity-, gas- and wood
heating facilities
• Heating facilities
• Heat pump systems (geothermal
heating, sea or lake water heating,
condenser heating, DOAS (dedi-
cated outdoor air systems) and
exhaust-air heat pumps)
• Steam turbines
• Solar thermal collectors
• Sewage treatment heat exchangers
16
Project-specific areas of technology
Process piping systems• Distilled water, purified wa-
ter, WFI (Water for Injection),
de-ionized water
• Steam/UHP-steam (Ultra-high-
purity steam)
• Process piping
• Vacuums
• Disinfection facilities
• Sanitation boilers
• Water purifying systems
Industrial automation• Remote monitoring and control-
ling
• Communication techniques, PLC
(Programmable logic controller)
• Property automation
• LonWorks, Modbus technology,
RTUs (Remote Terminal Units)
Measurement techniques• Temperature
• CO2
• Humidity
• Energy
• Effect
• Flow
• Pressure
• Radon
• Thermography
Biomedical engineering operations and Pharma-ceutical industries• Cleanrooms
• Biosafety level laboratoriums
• Operating rooms (OR)
• Biomedical tissue establishments
in medical care
• Animal facilities
• Laboratories
Energy• Investigation
• Strategy
• Energy Performance Certification
• Optimization
• Simulation (For building permits,
environmental classification for
buildings etc.)
17
Our financial statements speak clearly for themselves.
18
PB teknik is a successful company and a substantial competitor within our area
of expertise. The facts are, that we continually increase our market share each
year which was noted in 2005 as well as in 2009 when PB teknik was appointed
a Gazelle Company by the Swedish press journal Dagens Industri. This prize is
awarded to companies in Sweden who fulfill the following criteria:
1. Report a yearly turnover of 10Mkr or more
2. Have 10 persons or more in employment
3. Double their yearly revenue; if you were to compare
the financial statements of the first year vs the most
recent fiscal year
4. Increase their yearly turnover, every year, for the
past three years.
5. Show an overall profit for four consecutive financial
years.
6. Grow essentially organically, not through acquisi-
tions or mergers.
7. Have sound financial management
Income statement (á thousand SEK)
Year 2013 2012
Net turnover 28 415 31 675
Profit after net financial income 1 903 2 461
Net profit for the financial year 1 307 1 748
Balance sheet (a´ thousand SEK)
Year 2013 2012
Assets
Depicted non paid capital 0 0
Fixed assets 1 326 1 158
Asset turnover 13 257 13 660
Total assets 14 583 14 818
Liability, equity and reserves
Equity 7 680 7 572
Deferred tax liabilities 1 743 1 743
Reserve 0 0
Long-term liabilities 110 124
Current liabilities 5 051 5 378
Liabilities and equity 14 583 14 818
Key figures (percentage) 2013 2012
Return on equity (%) 14.5 20.6
Equity ratio (%) 61.47 59.77
Liquidity ratio (%) 201.66 216.81
Operating margin (%) 5.9 7.5
PB teknik has also, since 2005 been awarded an
AAA credit rating.
We see this as proof of the high level of expertise and
quality of service that we provide.
PB teknik is a consultancy company in tailwind, alt-
hough we have worked hard to get here - a position
amongst the best in Sweden.
This being said, we are not settling.
We’re constantly advancing and growing and intend
to continue to do so.
Our annual turnover 2012 amounted to almost
28.5 million SEK.
Since 2006 we have increased our yearly gross reve-
nue by 5 % per year.
Our current prognosis for 2013 looks even brighter.
Our share capital amounts to 800 000 SEK distributed
over 8000 shares.
Gazelle company of the yearPB teknik was awarded the prestigious Gazelle Com-
pany title in both 2005 and 2009 since our business
continuously expanded and we subsequently doubled
our yearly turnover during that period.
Highest credit ratingWith us, our customers can do safe and profitable
business.
PB teknik AB was awarded in 2011, the Solidity
triple-A bronze diploma as our company has maintai-
ned highest credit rating for the past 5 years.
19
We performed CFD-calculations, HVAC-design, as
well as drawing and engineering of the fire sprinkler
systems on 25 000 m2 of educational halls, adminis-
trative and office premises at Pedagogikum, Uppsala
University.
New climatisation in
OK Q8’s head office in
Stockholm. HVAC-design
and controlling of HVAC-
systems.
HVAC-system investiga-
tion in the new construc-
tion of residential housing
block ”Tobaksmonopolet”
in Stockholm.
Each project is unique.
Please feel free to order additional references and a list of our Curriculum Vitae at [email protected] more information you are welcome to visit our website at: www.pbt.se
We are proud of our results; they speak for themselves. PB teknik is contracted by
a large number of demanding clients from different industries and businesses,
everyone from smaller property owners to large scale stock exchange listed com-
panies both in the private and public sector. We also have framework contracts
with a large number of procurers within county councils and municipalities.
HVAC-design and drawing of bathing- and recrea-
tional facilities is one of our specialties.
We engineer and design new constructions as well as
the reconstruction of buildings.
Thermography of a circulator pump in Stora
Mossen’s icerink. PB teknik performed an energy-
efficiency survey to produce an EPC Certificate for this
building.
20
H V A C D E S I G N A N D E N G I N E E R I N G O F :
– S T O R E S A N D S H O P P I N G C E N T E R S
– S C H O O L S
– L A B O R AT O R I E S
– C L E A N R O O M S
– R E C R E AT I O N A L F A C I L I T I E S
– B AT H I N G F A C I L I T I E S
– I C E H A L L S A N D I C E R I N K S
– P R E - S C H O O L S
– H E AT P U M P S
– S C H O O L K I T C H E N S
– R E S T A U R A N T S
– O F F I C E B U I L D I N G S
H O T E L S
– R E T I R E M E N T H O M E S
– R E S I D E N T I A L H O U S I N G
© 2014. Graphic des ign: Jet lag Creat ive AB. Pr int : Urban Media AB
21
PB teknik AB
Vretenvägen 2
SE-171 54 Solna, Sweden
Tel. +46 (0)8 564 859 50
Fax. +46 (0)8 564 859 60
E-mail: [email protected]
www.pbt.se
22