FITNESS, HEALTH, WELLNESS / COMPETENCE FITNESS, HEALTH, WELLNESS / COMPETENCE.
wBLING E ARE cA cOMPETENcE. - rosenberger.com · ax. insertion loss [ d B] M ... is our core...
Transcript of wBLING E ARE cA cOMPETENcE. - rosenberger.com · ax. insertion loss [ d B] M ... is our core...
200 PAges of cAblIng comPetence:
An oVerVIew
comPAnyrosenberger osI is the name for most superior cabling and connectivity solutions. learn why innovation is our daily business.
PAge 6
APPlIcAtIonsour products are to be found where highest data volume is transmitted in a fast and reliable way. be it a data center or an antenna mast.
PAge 14
2 oVerVIew connectors InsIde
3ROSENBERGER OSI PRODUCT CATALOG
serVIcesexcellent products do not automatically ensure successful project completion. that is why we support you with substantial services.
PAge 32
technologyfor good reasons rosenberger osI is a synonym for innovation. on the following pages you will find some of the key technologies rendering our products that successful.
PAge 44
ProdUctsAround 3,000 of more than 40,000 products which belong to the best the world of cabling has to offer. clearly arranged and presented with all relevant properties.
PAge 56
5
3
male
female
type: metal
duplex
compact
simplex
duplex
compact
simplex
female
male
simplex
duplex
simplexduplex
compact
Pc
Mu
ltiM
od
esi
ng
leM
od
esM
apc
du
plex
Ferr
ule
[mm
]
lock
ing
M
ech
an
isM
sta
nd
ard
Ma
x. i
nse
rtio
n
loss
[dB]
Min
. ret
urn
lo
ss [d
B]
teM
pera
ture
ra
ng
e [°
c] *
wIth PArAmeters
ImPortAnt connectors
type diamond: metal / ceramic
mtP
® is
a re
gist
ered
trad
emar
k of
Us-
cone
c lt
d. -
e20
00™
is a
regi
ster
ed tr
adem
ark
of d
iam
ond
s.A
. -
* lim
itatio
ns d
ue to
the
used
cab
le m
ater
ial a
re p
ossi
ble
lc • • •
standard
mini-lc- duplex
compact (Uniboot)
Ø 1.25latched
push-pulllocking
Iec 61754-20
0.1510.3
1 mm low loss type
20 mm45 sm Pc55 sm UPc70 sm APc
-40 to+85
Mu • • • • Ø 1.25 Push-pull Iec 61754-6en 50377-10
0.1510.3
1 mm low loss type
20 mm45 sm Pc55 sm UPc70 sm APc
-40 to+85
sc • • • • Ø 2.5 Push-pull Iec 61754-4 en 50377-4 0.4
20 mm45 sm Pc55 sm UPc65 sm APc
-40 to+85
e-2000™ (lsh) • • •
duplex
duplex-compact
Ø 2.5latched
push-pulllocking
Iec 61754-15en 50377-8
0.25 sm0.4 mm
20 mm45 sm Pc55 sm UPc70 sm APc
-40 to+85
Mtp®Mpo • • 8/12/24
fibers
Precision-injection molded plastic
Push-pull Iec 61754-7 0.6 sm0.35 mm
20 mm55 sm APc
-40 to+85
Mt-rJ • • 2 fibers
Precision-injection molded plastic
latched push-pull
lockingIec 61754-18 0.6 20 mm
35 sm-40 to
+80
Fc • • • Ø 2.5 screw Iec 61754-13en 50377-2 0.4
20 mm45 sm Pc55 sm UPc65 sm APc
-40 to+85
st • • • Ø 2.5 bayonetIec 61754-2
mIl-c-83522Iec 60874-10
0.420 mm40 sm Pc45 sm UPc
-40 to+85
din (lsa) • • • Ø 2.5 screw
Iec 61754-3former
dIn 472560.4
20 mm45 sm Pc55 sm UPc
-40 to+85
F-sMa • screw Iec 61754-22 0.8 n.A. -40 to+115
AlwAys wIthIn sIght:
the most sIgnIfIcAnt connectors
All of our Preconnect® products, patchcords and pigtails are available with various connectors to cover all fields of application. the fold-out page helps keeping track while exploring our pro-ducts or dealing with lists of part numbers. the most important parameters are available at a glance. further information about the different connectors is available on pages 62 – 89.
4
Mu
ltiM
od
esi
ng
leM
od
esM
apc
du
plex
Ferr
ule
[mm
]
lock
ing
M
ech
an
isM
sta
nd
ard
Ma
x. i
nse
rtio
n
loss
[dB]
Min
. ret
urn
lo
ss [d
B]
teM
pera
ture
ra
ng
e [°
c] *
7ROSENBERGER OSI PRODUCT CATALOG
this catalog you currently hold in hands covers about 3,000 of more than 40,000 products belonging to the best you can find on market. Above that it shows our passion for the subject of cabling – the source of all of these examples of superior performance.
within more than 20 years, due to our passion, this ambitious startup of 1991 has become the synonym for cabling competence. It’s the people with passion for technical challenges. Personalities with their heart set to solve all major and minor small problems our customers are confronted with every day. our staff mem-bers with their meticulousness and highest degrees of personal commitment are the reason for the excellent quality of every single product.
they all made it happen that nowadays rosenberger osI is not only synonym for state-of-the-art cabling but also for an innovative spirit and an exceptional customer orientation. regardless, if it’s about individual customization of a connector, the equipment of a mobile out-side broadcast vehicle or the conception of an infrastructure for a data center: the result will exactly meet the requirements and exceed your expectations.
PersonAlIty.And An UnmIstAKAble
eAch of oUr ProdUcts hAs VArIoUs certIfIcAtes.
from simple pigtail to complete cabling of dc-infrastructures – with
rosenberger osI your cabling is in good hands
8 ROSENBERGER OSI PRODUCT CATALOG
Innovative solutions for fiber-optic It cabling were the objective for the foundation more than two decades ago. And even today fiber optics is our core competence. within that focus area and in related fields we developped numerous innovative solutions, which are considered to be unperalleled in their application areas.
oUr focUs Is fIber oPtIcs.oUr cAblIng Know-how Is comPrehensIVe.
In first place our Preconnect® fIber trunks set world-wide standards for high-speed-cabling of data centers (see pages 94 – 101). with up to 144 fibers these highly integrated data highways comprise the backbone of modern data centers which are forced to fulfill constantly rising per-formance requirements. but also our outdoor trunks and breakout cables which are wastly emplemented – especially in the field of mobile communication – are internationally acknow-ledged as model for the technically feasible.
comPAny
9ROSENBERGER OSI PRODUCT CATALOG
In the meantime we have accomplished to transfer our know-how from fiber optics to copper-based It cabling. there-fore, despite of its six channels, our Preconnect® coPPer trunk tor belongs to the thinnest and most flexible of its kind and is perfectly suited for top-of-rack installations. And for harsh environments our hybrid connectors of the heavy duty series (see pages 82 – 85) have the reputation of being the best performing and robust solution.
Independent of your application requirements: with each of our products you opt for many years of practical experience, engineering at highest level as well as uncompromising and me- ticulous production. And for perfect satisfaction.
lc-compact and heavy duty 600 two reliable guarantors for top
performance
11ROSENBERGER OSI PRODUCT CATALOG
rosenberger osI has an excellent reputation as provider for high-end components and supplier of individually customized solutions. for that reason – at first glimpse – many people are sur-prised to find out about our huge manufac- turing capacities and the efficiency of our logistics. In fact we are proud of bringing the agility and flexibility of a smaller medium-sized company so ideally into accord with the power of vastly larger competitors.
the main reason for this is to be found in taksony near budapest: our production and logistics center significantly expanded and modernized in 2011. on about 3,500 square meters there are five semi-automatic production lines – specifically dedicated to the respective product groups – with a future-proof dimen-sioned high rack storage area and an efficient shipping department. Additional optimization of the production processes enabled further growth of the already high throughput. to note: not diverging in the least from our high quality standards.
In combination with our project-management and quality assurance procedures, certified according to international standards, this ensures that we can meet shortest delivery times. this especially applies for vast projects such as new construction of a large data center or equipping a comprehensive mobile phone network.
production in taksonyAll rosenberger osI products
are subjected to extensivequality inspections
shortest leAd tIme.
we lIKe beIng metIcUloUs.eVen If It Is AboUt
dIn Iso 9001:2008
PVP Premium Verification Program of the ghmt
rosenberger osI is certified according to the following guidelines:
dIn Iso 14001:2004
12 ROSENBERGER OSI PRODUCT CATALOG
comPAny
oUr strength.InnoVAtIon AlwAys wAs
And thAt wIll contInUe to be lIKe thAt.
13ROSENBERGER OSI PRODUCT CATALOG
2010 expansion of production and logistics area at production site in taksony by more than 1,500 m²
2011 20 years rosenberger osI
1992
1993
1994
1996
1999
2001
2005
2006
2009
1991 foundation of the company in Ichenhausen
1995 first production of high density fiber trunk systems for It cabling of data centers world-wide
1997 expansion of production capacity, new production site in taksony/hungary
1998 merge with rosenberger group
2000 reinforcement of lead in the market by development of trunks with 144 fibers and mtP® / mPo multi-fiber connectors, award of first Ibm fts qualification
2003 Introduction of the mU connector, development of Preconnect® mobile
2002doubling of production capacity in taksony / hungary; new site in Augsburg
2004 series manufacturing of own mU and sc connectors
2007 launch of Preconnect® coPPer the factory assembled trunk system in the copper cable segment
2008 large scale production of optical fiber connectors sc, lc, mU
mtP® is a registered trademark of Us-conec ltd.
14 ROSENBERGER OSI PRODUCT CATALOG
dAtA centermodern data centers are the control rooms of today’s world. especially the cabling as communication interface must meet and fulfill highest requirements regarding reliability. PAge 16
mobIle commUnIcAtIonmobile telephony and comprehensive data services are characterized by rapidly increasing data rates. the cabling does not only have to keep pace – in contrast it has to anticipate future standards.
PAge 20
cabling by rosenberger osI is found wherever highest data transmission rates, lowest susceptibility against interference and exceptional longevity are crucial. In our world the data traffic is increasing daily – and that applies more and more outside fo data centers as well.
where yoU cAn fInd oUr ProdUcts:
the fIelds of APPlIcAtIon
15ROSENBERGER OSI PRODUCT CATALOG
broAdcAstlive transmission of big events in hdtV resolution rapidly creates large data streams. on site our fiber cables and connectors must withstand extreme operational demands.
PAge 24
IndUstrIAlthe harshest environmental conditions are to be found in the industrial area. In mining industry, offshore platforms or avia-tion: heavy duty products reveal what’s in them.
PAge 28
16 ROSENBERGER OSI PRODUCT CATALOG
wIthoUt cAbles?whAt‘s theIr VAlUe
bIllIons of ArIthmetIc oPerAtIons Per second.
APPlIcAtIon fIeld dAtA center
17ROSENBERGER OSI PRODUCT CATALOG
when thinking of data centers in general, pictures of incredibly powerful hardware com-ponents turn up. cabinets packed with count-less processing units capable of astronomical computational power. who doubts, that here the proper work is done. but without cabling the whole setup can not fulfill its purpose.
the lImIts of the PhysIcAlly feAsIbleAnd indeed it is everything but trivial to trans-port these vast amounts of data error-free, fast and in a reliable way between the different active components of a data center. constantly rising data rates urge us to challenge the limits of the physically feasible in cabling.
18 ROSENBERGER OSI PRODUCT CATALOG
of eVery dAtA centerthe bAcKbone
cAblIng:
APPlIcAtIon fIeld dAtA center
Pages 98 – 101
since more than 20 years rosenberger osI has managed data center projects of every size from 30 to 20,000 square meters of It space. there- fore we can claim without exaggeration to know exactly which challenges have to be met – and which risks are frequently and unnecessarily taken. because efficient cabling is the basis of all and any processes and has to be considered from the very beginning of the design phase of the data center.
comPrehensIVe solUtIons from one soUrce rosenberger osI ensures for maximum opera-tional reliability and performance for your data center. by extraordinarily reliable components, having passed strict quality assurance tests, by well-founded know-how in consulting and short reaction times. And by an excellent on site serv-ice you can rely on in every situation.
19ROSENBERGER OSI PRODUCT CATALOG
toP of rAcK cAblIng our innovative ready-to-use Preconnect® coPPer trunks are perfectly suited for routing above the racks. the high degree of flexibility allows for minimum bending radii.
Page 123
InfrAstrUctUre cAblIng In rAIsed floors with the Preconnect® fIber trunks – here a multi Jumper type – rosenberger osI established international standards. they are pre-terminated, ready-to-use and form the heart of state-of-the-art data center cabling.
locAl dAtA dIstrIbUtIon Patchcords at the patch panel handle the local data distribution. Also for this application our components ensure the highest reliability and operational security. All standard types of fibers and connectors are available, serial number labels on both sides and individual measurement reports render our quality traceable.
Pages 128 – 133
20 ROSENBERGER OSI PRODUCT CATALOG
oUr ProdUcts too.Are AlwAys AheAd of tIme.
mobIle commUnIcAtIon stAndArds
APPlIcAtIon fIeld mobIle commUnIcAtIon
21ROSENBERGER OSI PRODUCT CATALOG
telecommunication is one of the most dynamic and innovative fields of operation world-wide. successful are only those cooperating with tech-nology partners capable of keeping step with the rapid development and providing competi-tive advantages, continuously. like rosenberger osI.
PArtner of globAl PlAyers we support the world-wide market leaders and ensure their competitive position. every year all around the globe thousands of new antenna masts are equipped with our fiber to the Antenna (fttA) solutions – and they will set the standard for the next decades.
22 ROSENBERGER OSI PRODUCT CATALOG
A few meters cAn be crUcIAl.to the AntennA:
from bAse stAtIon
APPlIcAtIon fIeld mobIle commUnIcAtIon
Page 168
the place where billions of high-frequency sig-nals turn into digital, cable-bound data streams is the antenna mast. right here, between base station and antenna, the quality of the trans-mission between network and end-user is de-fined. fiber to the Antenna (fttA) solutions by rosenberger osI ensure that not only current but also standards to be expected in the future will be met without compromise.
fttA-systems for All APPlIcAtIons even if all mobile antenna masts serve the same purpose in the end: in practice different cabling schemes and architectures are applied. for each of these approaches we provide the proper prod- ucts and – with our parent company rosenberger – complete ready-to-connect packages including all required ancillary equipment and mounting material. Just as the carriers do expect from a future-proof system supplier.
23ROSENBERGER OSI PRODUCT CATALOG
to the AntennA:connectIon of the trAnsmItters breakout cables connect the distri-bution box and the antenna. the so called “jumpers” from rosenberger osI are extremely robust and easy to handle during the installation.
Pages 112 – 115
weAtherProof dIstrIbUtIon boX In structured fttA systems the multi-fiber trunk cable is split into individual channels and routed to the radio units via breakout cable. In case of re-installation only the shorter breakout cables have to be changed.
robUst oUtdoor trUnK this fttA-trunk is the longest and most stressed cable at the mast. because of its large ex-posed surface the trunk must be resistant against the most adverse environmental influences. with an operation temperature range between -40 °c up to +80 °c Preconnect® fIber trunk outdoor withstands heat, cold and extreme temperature changes and belongs to the most robust trunks on the market.
Pages 110 / 111
24 ROSENBERGER OSI PRODUCT CATALOG
by rosenberger osI.wIth hIgh sPeed cAblIng
lIVe At the scene.
APPlIcAtIon fIeld broAdcAst
25ROSENBERGER OSI PRODUCT CATALOG
lIVe At the scene. modern media technology permits high-resolu-tion motion pictures for almost all end devices. And for sport events almost always live and in real-time. Vast amounts of data must be proc-essed on site in the mobile production unit and delivered in the shortest time from the place of origin to the consumer’s screen.
mAny mAtIng cycles, hArsh condItIonsthe special challenge for optical fiber cabling is to be found in the incredible number of mating cycles, the very complex connectors are subject- ed to. Above that consider the rough treatment of cables on site. the conditions for which our heavy duty series are predestinated for.
26 ROSENBERGER OSI PRODUCT CATALOG
JUst lIKe for cAblIng.PerformAnce, strAtegy And PersIstence,
whAt coUnts on the lAwn Are
APPlIcAtIon fIeld broAdcAst
Pages 108 / 109
eight cameras, four stage boxes, one outside broadcast truck: a typical setting for a larger event such as this bundesliga match. not to be forgotten: various monitors, microphones and reporter booths. each interface of this complex network has to be connected to each other by high-speed cables: fast, simple and absolutely reliable. for extreme environmental conditions, frantic activity and severe mech-anical strain this definitely means a challenge.
comPrehensIVe ProdUct PortfolIo In our longtime cooperation with broadcasting companies, system integrators and manufac-turers of mobile production units a multitude of cabling components was developed. thus we are able to cover almost every application.Above that our customers appreciate the option of individual customization, short delivery times and efficient trainings.
27ROSENBERGER OSI PRODUCT CATALOG
cAmerA connectIon the hybrid heavy duty 600 connector enables for power supply and data transport. with two, four or six optical fibers and up to four electrical contacts – on the customer‘s demand.
Page 84
stAge boXes As IntermedIAte dIstrIbUtor these local intersections for attachment of e.g. monitors and microphones are connected with our mobile Preconnect® fIber trunks. these hermaphrodite heavy duty connectors permit easy and direct connection from cable to cable.
mobIle ProdUctIon UnIt this is where all signals converge, are cut and edited, all before the final stream is transmitted via satel-lite. dependent upon vehicle size the data initially run up to a patch panel or directly to the editing suite. here our patchcords with lc-duplex connectors are applied, especially.
Page 62
28 ROSENBERGER OSI PRODUCT CATALOG
rosenberger osI heAVy dUty.the Perfect enVIronment for
dUst, mechAnIcAl strAIn, eXPlosIon hAZArd.
APPlIcAtIon fIeld IndUstrIAl
29ROSENBERGER OSI PRODUCT CATALOG
optical fibers are generally considered suscep- tible to contamination and mechanical strain. Anyone who has assured himself of the fragility of a single optical fiber and specific attenuation of a particle of dust knows the reason why. therefore we are really proud of the fact that our products can also be found in mine shafts.
fIber oPtIcs for the IndUstry Products that sustain such extreme conditions can also cope with other harsh environments. If on offshore platforms, military applications or aviation: cabling by rosenberger osI is chosen when high bandwidth and extraordinary robust-ness are required.
30 ROSENBERGER OSI PRODUCT CATALOG
fIber oPtIc technology.reAlly mAsters
here It becomes eVIdent who
APPlIcAtIon fIeld IndUstrIAl
Page 85
mining resources underground is a technolog- ical masterpiece. remotely managed from control centers on the surface several hundred meters below highly complex mining systems burrow through the ground – under surveillance of video cameras and extensive sensor systems. nowadays humans are rarely seen down there. there is no need of vivid imagination to envision the incredible forces and strains the cables and connectors are exposed to.
cUstomer sPecIfIc hIgh-end technologydepending upon the type of natural resources, the components have to be protected from extreme influences in an appropriate manner. Irrespective of what we are dealing with: acid – as for copper mining, salt – as in potassium mines, or the explosion hazards as in coal mining. due to our wide experience we can offer and provide our customers individualized end-to-end systems literally capable of facing all challenges.
31ROSENBERGER OSI PRODUCT CATALOG
IndIVIdUAlly AdAPted comPonents the already durable heavy duty connectors can be armored with a steel shell for most extreme mechanical strain – just one of many possibili-ties of customer-specific adaption.
eXPlosIon-Proof dIstrIbUtIon boXes Underground, on the mining face, within explosion-proof housings the patch panels merge most divers data and signal sources. Inside, factory assembled splice cassettes or patchcords are used. the connector for the trunk on the outside must withstand great- est loads.
Pages 136 / 137
connectIon of mIne control roomspecially adapted Preconnect® fIber trunks with singlemode fibers ensure the vast amounts of data are transported via many kilometers as lossless as possible.
Pages 108 / 109
32 ROSENBERGER OSI PRODUCT CATALOG
PhAse 2: lAbelIng And logIstIcsto ensure a clear view during installation despite the large number of components we apply efficient tools for labeling, handling and documentation. In practice this leads to signifi-cant time advantage and results in cost benefits. PAge 38
oUr serVIcesevery system is only as strong as the weakest component. the significance of cabling in data centers is frequently underestimated – and regularly neglected during examination of performance issues. that is why we support you during all phases of the project – with the practical experience of 20 years.
PhAse 1: desIgn And engIneerIngthe closer data rates approach physical limits, the more attention must be paid to the transmission links – already during the design phase of a data center. we can explain how to avoid mistakes.
PAge 36
eXPect more thAn the best ProdUcts:
33ROSENBERGER OSI PRODUCT CATALOG
PhAse 3: ProJect mAnAgement And InstAllAtIon during the hot phase right before putting into service the in-frastructure we keep cool and keep track of everything. on re-quest we also coordinate the other trade work, performe the complete installation and carry out the final measurements.
PAge 40
PhAse 4: mAIntenAnce And sUPPortIf a data center does not or no longer yield the expected overall performance one reason may be inadequate dimen- sioning or defect in cabling and connectors. we analyze and resolve faults or errors and offer long-term support.
PAge 42
34 ROSENBERGER OSI PRODUCT CATALOG
serVIces
we tAKe cAre of thAt.
cAblIng cAnbe A rAther comPlIcAted And dry mAtter.
don’t worry:
35ROSENBERGER OSI PRODUCT CATALOG
there are few technical areas with higher complexity than modern data centers. for that reason it is all the more crucial that the multi-tude of components is ideally matched to each other. not only the active technologies require greatest diligence during the project planning. cabling plays a decisive role as well.
In context with the ever increasing demand for higher data rates the physical limits for the transmission links are reached more and more often. this must already be considered during the fundamental design steps for the data cen-ter. good, that we have so much experience and practical know-how. this helps you to keep relaxed – and us, too.
36 ROSENBERGER OSI PRODUCT CATALOG
depending on the starting position and the environment the planning phase can differ significantly with regard to dimensioning and course of action. which special conditions do exist? Are we talking about expanding an exist-ing data center or building a new one? while e.g. the second case permits choice of topogra-phy to suit future demands without succumbing to attenuation limits of the transmission links, the first case requires consideration of the status quo. this automatically demands taking extensive critical inventory.
In any case it’s all about the most efficient cable management – between rooms and racks as well as within the racks. for this consideration of cable types and connectors, number of inter-faces, type of cable routing – top of rack or raised floor – and variant of racks and panels has to be taken into account. Absolutely crucial is the question of the desired degree of flexibility and the necessary headroom for future data rate requirements.
Among all these considerations we neither loose track of the perspective nor the current status of standards.
serVIces
Joint consulting and diligent planning are the core principles of each project.
PhAse 1:
PlAnnIng And engIneerIng
37ROSENBERGER OSI PRODUCT CATALOG
cUstomIZed solUtIonsone of our special skills during project planning is our ability to incorporate very special demands and requirements. here it pays off that we have learned to combine the flexibility of medium-sized business with the decades of experience in data center environments. should individual adaption or application specific development be necessary the course of the project prepara-tion, we offer different solutions and evaluate costs and feasibility. to do so our engineering team, customer service representatives and
end-user work closely together to ensure the fulfillment of all practical requirements to finally achieve an optimal implementation.
In that way we were able to master a lot of special challenges for our customers, which could be solved with standard components. for example racks with extremely small installation depth, project specific switch cabling or special versions of our Preconnect® trunks.
39ROSENBERGER OSI PRODUCT CATALOG
depending on the dimensions of a project the number of products to be processed may be very high and handling can be accordingly complex. thousands of connectors must be plugged, hundreds of active and passive com-ponents connected, racks and rooms cabled. rosenberger osI has developed intelligent processes and tools which not only radically simplify work on site but also ensure retraceability of every single cable.
strUctUred ProdUct IndeXesAccording your briefing we set up extensive listings containing all to be used cablings. these represent the structure of your individual project and picture the perfect base for bill of material and subsequent data center documentation. Upon request even successive serial numbers of cables and trunks are already included to keep installation as simple as possible. And above that the direct link between each shipment and packing unit is ensured under all circumstances.
IdentIfIcAtIon And retrAceAbIlIty A key feature of the rosenberger osI logistic system is the systematic and detailed product labeling. each packing unit is equipped with a post-card sized, clearly legible label which not only states the exact product and detailed specification but also the order number with associated barcode.
even for the most voluminous projects this ensures that every cable and every trunk can be identified instantly without a time-consuming search or opening the packages. but this is only one of the reasons why we are the partner of choice for projects with tight time horizon.
the one-to-one assignment of serial numbers has another decisive advantage: the retracea-bility back to production and delivery. should any unexpected defect or undesirable change of product arise, the reason can be found at any time.
hAndlIng And PAcKAgIng of course, each of our trunks is supplied with comprehensive handling and installation infor-mation. to prove the excellent quality of each of rosenberger osI´s products the individual measurement reports are included in the shipment in hardcopy form or in case of larger projects in electronical form. because we meti-culously measure each fiber and connector we gather large amounts of data.
to ensure that between our quality assurance test and the deployment of the cables no damage of the products can arise, they are packaged particularly sturdy and carefully. trunks are de- livered either in generously dimensioned boxes or in case of longer lengths or higher fiber counts on drums of cardboard or wood.
41ROSENBERGER OSI PRODUCT CATALOG
during the implementation phase we assist in project management and coordinate the other parties involved in the infrastructure: energy supply, security and cooling systems. frequently the structured cabling is already installed prior to the installation of the active components. A smooth interface has to be ensured.
basically the question has to be faced which ratio the splice-cabling will occupy. nowadays most bigger data centers are built with complete- ly pre-terminated trunks and cables, e.g. our Preconnect® fIber trunks. the advantages with respect to benefits in time and flexibility are clearly visible. nevertheless the splicing technology can make sense for smaller data centers or an interbuilding solution.
If desired we also can perform the installation for you – by our staff members with long-term experience, versed with each detail and possible source for error. we label all cable-ends and com- ponents compliant to your own system or in the scope of our Preconnect® IPs asset manage-ment.
After installing all components and as soon as the complete infrastructure is accomplished, we can perform detailed on site acceptance meas-urements with specific emphasis upon the core parameters attenuation and reflection, on re- quest. because - in spite of meticulous quality assurance tests during manufacturing – only a measurement in the real operation area can ensure perfect performance.
preconnect® cable dividers
the robust Preconnect® divider heads can be
installed tool-free thanks to its square interface.
Measurements at the patch panelIn practice measurement data are obtained and evaluated to ensure the faultless and perfect performance of all processes.
the rosenberger osI Preconnect® fIber trunks enable a rapid and easy installation.
PhAse 3:
ProJect mAnAgement And InstAllAtIon
42 ROSENBERGER OSI PRODUCT CATALOG
maybe it surprises you to learn that we, as a supplier of high speed cabling, also offer service all around maintenance and support. but our decades of insight into the most diverse practical scenarios reveal that right here a significant demand exists for a well-founded support. frequently the influence of cabling on perfor-mance of the data center is underestimated – and that influence is constantly rising.
the goal of 100 gigabit transmission as the next step data rates of 400 or even 1,000 gigabits are already discussed. but for most installed cabling infrastructures this is far beyond the possible.
when upgrading your data center rosenberger osI can help with an initial estimation if the existing infrastructure is still adequate or if it has to be upgraded as well. If substantial measure-ments should be necessary we cooperate with specialized partners. based upon status quo and performance targets we define the briefing for the project planning (see pages 36 / 37).
In the scope of running data center mainte-nance we perform network analysis and quality checks in form of microscopic examination of fiber optical connectors. we measure attenuation and reflection and detect fractures of the optical fibers by the means of lasers. but also other pos-sible causes of error are not neglected, such as e.g. wrongly crossed cable strands. defective connectors or cables are replaced immediately.
our well-based know-how in error analysis and correction will soon pay off for you – for the short-term as well as the long-term perspective.
cleaning of ferrule faces is just as much part of maintenance as the use of modern software for detection of potential interferences of transmission links.
serVIces
PhAse 4:
mAIntenAnce And sUPPort
44 ROSENBERGER OSI PRODUCT CATALOG
Preconnect®more than 20 years ago our fiber optic technology Preconnect® already set the standards. the new Preconnect® generation again surpasses itself. PAge 48
swItch cAblIngIndividual solutions for switches and routers in data centers: with our know-how and the Preconnect® fIber trunk multi Jumper we establish efficient switch-cabling for each net-work device.
PAge 51
technologythe fiber optic technology evolves as fast as its market. As a leading company in fiber optics, rosenberger osI consistently faces itself challenges, to achieve best possible results.
45ROSENBERGER OSI PRODUCT CATALOG
lens contActsUnsusceptible to dirt at variable working distance. the technology of expanded beam connectors renders that connector type a robust precision technology.
PAge 52
Angled PhysIcAl contAct (APc)low reflection connections and stable transmission paths: high-grade connectors by rosenberger osI with angled polished surfaces.
PAge 53
lAser connect hIgh Powerreliable high-performance technology of a new generation: this laser connector with novel conic prism and total reflection allows a power of up to 40 kw.
PAge 54
8° contActAreA
46 ROSENBERGER OSI PRODUCT CATALOG
And the motIVAtIonIn only AccePtIng the best.
technologIcAl leAd Is A resUlt of Knowledge
technology
47ROSENBERGER OSI PRODUCT CATALOG
In times of a society aligned for communication and information exchange the fiber optic tech-nology increasingly gains importance. growing data volume requires higher transmission rates and bandwidth – and impose ever growing de-mands to material and engineering. the mission of rosenberger osI is to determine the further
development of fiber optic technology by in-novative research and to consolidate its tech-nological advantage consistently. this means to us: promoting innovation, implementing state-of-the-art technology – up to the limits of the physically feasible.
48 ROSENBERGER OSI PRODUCT CATALOG
Preconnect®
the rosenberger osI Preconnect® cabling sys-tem consists of pre-connected loose tube cables with up to 144 fibers – called ”trunk“.
Already in 1991, as first company, rosenberger osI introduced these innovative Preconnect® trunks to the german market. due to our long- term experience in the field of fiber optics and the continuous further development of our products, we still maintain an obvious techno-logical advantage to our competitors.
AdVAntAges of Preconnect® trUnKs At A glAnce:
• both cable ends are assembled with fiber optic connectors on stepped fanout legs, the fibers are measured in the factory.
• cables have robust cable dividers.• the standard coding resp. light propagation
of the legs is ”channelwise crossed“ (pairwise flipped) for full-duplex systems – A1 to b1, A2 to b2, etc.
• Upon request we also manufacture the Preconnect® trunks ”uncrossed“ (straight).
• for secure installation the fiber optic connec-tors, fanouts and cable dividers are equipped with tensile strength and crush resistant installation tubes.
• to accept the two factory assembled cable di-viders, panels developed by rosenberger osI are available with special square interfaces for tool-free mounting of the cable dividers, for tensile and torsion resistant installation of the trunks.
• the ready-to-use Preconnect® trunks result in minimum installation time and permanent reusability.
APPlIcAtIon fIelds
data center
MoBile coMMunication
Broadcast
industrial
Manufacturing of a preconnect® cable dividerstep where the fibers coming from the trunk-cable are inserted into the fanouts.
technology
49ROSENBERGER OSI PRODUCT CATALOG
the rosenberger osI Preconnect® cable dividers are one of the mechanically and ther-mally most robust cable furcations for loose tube cables at smallest diameters.
the loose tube cables are molded by two com-ponent resin into the back part of the cable divider and the individual fibers are inserted into loose tube fanout legs.
the Preconnect® cAble dIVIders:• spliceless cable divider for isolation of fibers
of loose tube cables• Very robust against mechanical and thermal
influence and water-proof according to IP67 – the optical fibers are perfectly protected against harmful environmental influence.
• the Preconnect® cable divider is extremely compact in relation to number of fibers.
• Integrated interface for dust or waterproof installation tubes (see below).
• with square interfaces for tool-free installation of Preconnect® cable divider into panels by rosenberger osI.
Preconnect® cAble dIVIder
loose tube fanout legs
two component resin system
Integrated interface for installation tubes
fibers
square interfaces for installation of the cable divider
50 ROSENBERGER OSI PRODUCT CATALOG
work requirements for conventional splicing solution:cabling of 100 m, two technicians: approx. 1 hoursplicing and other tasks, measurement of 48 fibers, two technicians, two splice units: approx. 8 hours total: approx. 9 hoursefforts for Preconnect®:cabling of 100 m, two technicians: approx. 1 hoursetting of connectors, installation of distributionboxes and transmission test, two technicians: approx. 0,75 hours total approx. 1,75 hours
conVentIonAl sPlIce cAblIng In economIc comPArIson to fActory Assembled Preconnect®:
low oVerAll cost the overall expenses for all components – such as cable meters, pigtails, splice boxes, splice pro-tection, splice holders – and above all the time-, personnel- and device-intensive splicing itself are in general higher than for a Preconnect® trunk.
low AttenUAtIon And reflectIon Preconnect® is a splice-less connection. the fibers of the cable are inserted into fanout legs in the cable dividers and directly assembled with optical connectors.
sAfetyPreconnect® trunks are completely protected against harmful environmental influences. In contrast, the fibers in splice boxes, are sub-jected to air and can age (increased attenuation, fiber fracture).
eAsy to mAIntAIn the robust fanout legs of Preconnect® cable dividers allow performing service tasks such as cleaning of optical connectors in a much safer way compared to spliced, bending-susceptible fiber pigtails.
InVestment ProtectIonPreconnect® trunks are reusable because they can be re-installed easily.
mInImUm InstAllAtIon tIme Very simple installation and acceptance test:• Preconnect® trunks only have to be laid
and the cable dividers and optical connectors plugged within the housing.
• Preconnect® trunks are pre-measured off factory therefore after installation only go/no go tests are required for detecting possible damage during installation at all.
• no expensive specialists or expensive special equipment, e.g. splicing and measurement devices required for installation.
• Presence of installation personnel in security relevant areas is reduced to a minimum.
AdVAntAges comPAred to conVentIonAl fIber oPtIc sPlIce cAblIng
technology
sPlIcIng
10 hrs.
9 hrs.
8 hrs.
7 hrs.
6 hrs.
5 hrs.
4 hrs.
3 hrs.
2 hrs.
1 hr. 9 hrs.
7,25 hrs.time saved
1,75 hrs.
Preconnect®
51ROSENBERGER OSI PRODUCT CATALOG
In the recent last years the steadily rising packing density in big switches and routers requires individualized cabling solutions. for cabling of units with high count of ports on smallest space many important details must be considered, such as later exchangeability of individual blades of a fully cabled switch.
rosenberger osI looks back on 20 years of expe-rience in data center cabling. during this time we have developed various ”best Practice“ cabling solutions for many models and generations of switches and routers.
swItch cAblIng
thanks to our know-how we make efficient switch-cabling possible for all our customers, for every network device and budget. with our innovative and comprehensive product range we are able to develop customized cabling solut- ions for specific requirements. due to, together with our customers, we design device and ap-plication specific solutions for big switches and routers perfectly adapted to their application.
for implementation of your customized switch cabling please contact us directly. we are looking forward to your inquiry.
APPlIcAtIon fIeld
data center
custom cabling at a big data center switch
Preconnect® fIber trunks multi Jumper in use
52 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIon fIelds
Broadcast
industrial
aviation
Medicine
harsh environMent
technology
lens-contActs
lens-contacts are characterized by a special connection technology which distinguishes it- self from most other optical connector types by its special performance: lens-contacts are not sensitive to soiling and permit variable working distance. for this reason they represent reliable optical connection technology for harsh envi-ronments with high degree of environmental influence.
• the lens connector technology uses beam expansion as main functional principle.
• the light exiting from the end of the fiber passes through a spherical lens and is expand-ed to a beam of a 100 to 200 times bigger area. on the opposite side an identical lens concentrates the incoming splayed beam back to its original diameter and back into the fiber.
• In the proper connector area the signal is transferred by a comparably large area, without contact of the end faces. this effec-tively results in a significantly increased tolerance against dirt and reduces the distance sensitivity.
lens-contact #12
rosenberger osI looks back on long-term ex-perience in manufacturing of such precision technology. special know-how, state-of-the-art production processes and uncompromising quality assurance make our lens contacts state-of-the-art products at high level. especially our customers from industry and broadcasting know and appreciate the performance and durability of our lens-contacts – where nothing may be left to chance they rely on high end technology by rosenberger osI.
schematic cross-section of lens-contact with beam path marked in red.
beam expansion inside the connector
53ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIon fIeld
MoBile coMMunication
data center
Ftth – FiBer to the hoMeharsh environMents
Angled PhysIcAl contAct (APc)
In optical fibers each fiber end causes reflec-tions of coupled light that results in signal at-tenuation and degradation. depending on the quality of fiber polish and endface geometry this causes aberrations with effects on data transmission. the APc technology – also called high return loss (hrl) – counters such inter-ferences. this guarantees for low-reflection connections and by this allows more stable transmission paths especially for high data rates.
• the fiber end is polished under a certain angle – usually 8°.
• reflections forming at the end of the fiber cannot spread anymore. reflected light is de-coupled from the contact surface of the fiber and emitted into the fiber cladding.
• the angled polish APc/hrl significantly reduces the return loss and interference by reflected signal components. the so-called signal to noise ration (snr) is significantly improved.
since its foundation rosenberger osI produces high quality connectors with angled polished fiber end faces. consequently that turns us into one of the most experienced companies in the field of fiber optics using APc/hrl technology. rosenberger osI not only manufactures solid ceramic connectors with APc faces but also successfully uses this technology for hybrid connectors of the heavy duty line. Above that we continuously improve our quality assurance and steadily optimize the production conditions to fulfill the enhanced demands for diligence and precision in manufacturing and quality assurance processes.
At all times best prerequisites for manufacturing our products according to the latest state-of-the-art technology and highest level of quality. In controlled manufacturing environments our frequently trained specialists work on one specific target: make the tried-and-true even better.
ferrule with APc-end example of heavy duty 600
8° contActAreA
54 ROSENBERGER OSI PRODUCT CATALOG
technology
lAser connect hIgh Power
the manufacturing industry cannot be imagined without laser welding. frequently applications with high laser power lead to unwanted side effects, abrasion, loss of precision and finally destruction of the connector. for this reason rosenberger osI invented laser connect high Power, an innovative system for the process of beam transmission successfully dealing with these complications.
APPlIcAtIon fIeld
industrial
the laser connect high Power at work: highest performance for laser welding and cutting facilities
laser connect high Power
55ROSENBERGER OSI PRODUCT CATALOG
lAser connect hIgh Power
deficient coupling good coupling
Inside cool air-stream for cooling of fiber chamber
external cool air-stream of the decoupling zone.
the new tyPe sPherIcAl lens• the new conic prism attached at the connector
face utilizes the laser light to such optimal degree (total reflection), that power of up to 40 kw become possible.
• At the same time an efficient beam deflection of badly coupled beams takes place, protecting the cladding.
• the technology of total reflection also avoids excessive heating due to back reflections from the work piece, precludes unstable focus and results in higher tool life.
An InnoVAtIVe coolIng system• An air-cooling system with high purity com-
pressed air dissipates excess warmth from the critical region at the fiber end and the con-nector side walls.
• this additionally results in active cleaning of the fiber surface and increases tool life.
better beAm QUAlIty by mode mIXer• Independent of the beam quality of the
launched laser light, the mode mixer permits developing uniform emission properties on the application side.
• this way old weld seams are avoided.
since 20 years rosenberger osI manu-factures laser launch connectors used in industrial and medi- cal applications. the experience and innovation resources of our company – specifically for the field of laser technology – now resulted in a high-quality and performance oriented connector and with which we have entered a new dimension.
the laser connect high Power: this is durable and reliable high-tech for laser welding and cut-ting lines – in expected rosenberger osI quality.
AdVAntAges of lAser connect hIgh Power As oVerVIew
57ROSENBERGER OSI PRODUCT CATALOG
60
90
138
182
In chAPtersthe ProdUcts
connectors
AssemblIes
PAnels And rAcKs
AccessorIes
58 ROSENBERGER OSI PRODUCT CATALOG
Preconnect® fIber 92 Preconnect® fIber trunk 94
Preconnect® fIber trunk multi Jumper 98 Preconnect® fIber breakout 102 Preconnect® fIber mtP® divider cables (harnesses) 104
Parallel optics in the data center 106 Preconnect® fIber trunk mobile 108 Preconnect® fIber trunk outdoor 110 Preconnect® fIber breakout outdoor 112 Preconnect® fIber cablebundle outdoor 116 Preconnect® fIber tower multi-fiber system (tmfs) 117 Preconnect® fIber Accessories 118
Preconnect® coPPer 120 Preconnect® coPPer trunk 122
Preconnect® coPPer trunk tor 123 Preconnect® coPPer trunk multi Jumper 124
PAtchcords And PIgtAIls 126 Patchcords fiber 128
Patchcords copper 133 Pigtails 134 factory Assembled splice cassettes 136
connectors lc 62
mU 64 sc 66 e-2000tm / lsh 68 mtP® / mPo 69 mt-rJ 70 fc 71 st 72 dIn / lsA 73 Adapters 74
optical contacts mInI contact 76 dIn contact 77 expanded beam contact #5 78 expanded beam contact #12 79 optical contact #16 80
heavy duty rosenberger duplex connector (rdc) 82 rosenberger Quad connector (rQc) 83 heavy duty 600 84 heavy duty 1000 85
laser connect laser connect 100 86 laser connect high Power 88
Further connector types 89
1
In detAIled oVerVIewthe ProdUcts
connectors
2 AssemblIes
59ROSENBERGER OSI PRODUCT CATALOG
3 PAnels And rAcKs
Inspection and cleaning Kit 184 test laser eV-3 185 reel cleaner 185 click cleaner 185 otdr measurement fiber case 186 Assembly tools 187 measurement cables 188
4 AccessorIes
mtP® is a registered trademark of Us-conec ltd.e-2000tm is a registered trademark of diamond s.A.
PAnels 140 19” 1 hU and 2 hU distribution Panel 142
19” 1 hU and 2 hU splice Panel 146 19“ 3 hU distribution module Panel 150 19“ 3+1 hU splice module Panel 152 19“ smAP distribution Panels 154 19“ smAP splice Panels 156 19“ smAP distribution Panels with mtP® modules 158 smAP Panel Accessories 160 19“ 6 hU distribution module Panel 162 mini Universal box 164 Universal box 166 distribution box outdoor 168 excess fiber cable enclosure outdoor 169 19“ 1 hU Panel copper 170 19“ 1 hU smAP Panel copper 170 19“ 1 hU distribution Panel copper tor 171
PAnel AccessorIes 172 Panel Accessories 174
rAcKs 178 Patch location rack 180
62 ROSENBERGER OSI PRODUCT CATALOG
connectors
APPlIcAtIons• lAn• sAn and data center• mAn and wAn
lc (Pc 0° and APc 8°)
technIcAl dAtA
standard Iec 61754-20
Ferrule Ø [mm] 1.25 Zirconia ceramic
insertion loss 1 [dB], max. 0.150.3
multimode low Insertion losssinglemode and multimode standard
return loss 2 [dB], min. 20455570
multimode Pcsinglemode Pc
singlemode UPcsinglemode APc
teMperature range [°c] -40 to +85 dependent on cable type
Mating cYcles, min. 1000
caBle Ø [mm] 0.9 - 3.0
strain relieF [n], min. 70
colour oF connector BodY bluegreenblackbeige
singlemode Pcsinglemode APc
multimode 50 µmmultimode 62.5 µm
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
ProPertIes• small form factor (sff) single-fiber connector• simplex and duplex• latched push-pull locking mechanism: a latch has to be
pushed for unmating• APc version with angled polished ferrule surface (8°)• spring loaded ferrule, aligned in a slotted sleeve• tuning possible• mini-lc-duplex with a reduced pitch of 5.25 mm available
indicated by a yellow clip
lc-duplexlc-compactlc-simplex
mini-lc-duplexlc Adapter, further adapter types see pages 74/75
49.5
31.8
6.25
63ROSENBERGER OSI PRODUCT CATALOG
connectors
con
nec
tors
1
PArtnUmbers
coMponents
connector BodY, siMplex, BuFFered FiBer singlemode Pc, bluesinglemode APc, greenmultimode 50 µm, blackmultimode 50 µm, black, low loss typemultimode 62.5 µm, beige
98 lcs 120-10198 lcs 110-10198 lcs 130-10198 lcs 130-10998 lcs 130-102
connector BodY, siMplex, caBle tYpesinglemode Pc, bluesinglemode APc, greenmultimode 50 µm, blackmultimode 50 µm, black, low loss typemultimode 62.5 µm, beige
98 lcs 120-10298 lcs 110-10298 lcs 130-10398 lcs 130-11098 lcs 130-104
connector BodY, duplex, 2 x incl. clipsinglemode Pc, bluesinglemode APc, greenmultimode 50 µm, blackmultimode 50 µm, black, low loss typemultimode 62.5 µm, beige
98 lcs 120-10398 lcs 110-10398 lcs 130-10598 lcs 130-10798 lcs 130-106
connector BodY, Mini duplex, 2 x incl. clipsinglemode Pc, bluemultimode 50 µm, black, low loss type
98 lcs 120-10498 lcs 130-108
criMp rings [mm] Ø 1.8 Ø 2.0 - 2.2 Ø 2.4 - 3.0
98 Zc 01-00098 Zc 02-00098 Zc 03-000
Boot Ø 0.9 mmblackbluegreenwhite
98 Zb 01-0bK98 Zb 01-0bU98 Zb 01-0gn98 Zb 01-0wh
Boot Ø 1.8 - 2.2 mmblackbluegreenwhite
98 Zb 02-0bK98 Zb 02-0bU98 Zb 02-0gn98 Zb 02-0wh
Boot Ø 2.4 - 3.0 mm blackbluegreenwhite
98 Zb 03-0bK98 Zb 03-0bU98 Zb 03-0gn98 Zb 03-0wh
dImensIons
connector BodY, coMpactsinglemode Pc, bluesinglemode APc, greenmultimode 50 µm, blackmultimode 50 µm, black, low loss typemultimode 62.5 µm, beige
98 lcs 120-20498 lcs 110-20498 lcs 130-20498 lcs 130-20698 lcs 130-205
criMp rings [mm] Ø 2.4 - 3.0 98 Zc 04-000
Boot For coMpactblackbluegreenwhite red
98 Zb 04-0bK98 Zb 04-0bU98 Zb 04-0gn98 Zb 04-0ye98 Zb 04-0rd
64 ROSENBERGER OSI PRODUCT CATALOG
connectors
APPlIcAtIons• mU: mobile communication wdm / dwdm systems
mAn and wAn sAn and data center
• mU APc: mobile communication wdm / dwdm systems mAn and wAn cAtV
Mu(Pc 0° and APc 8°)
technIcAl dAtA
standardIec 61754-6en 50377-10
Ferrule Ø [mm] 1.25 Zirconia ceramic
insertion loss 1 [dB], max.0.150.3
multimode low Insertion losssinglemode and multimode standard
return loss 2 [dB], min. 20455570
multimode Pcsinglemode Pc
singlemode UPcsinglemode APc
teMperature range [°c] -40 to +85 dependent of cable type
Mating cYcles, min. 1000
caBle Ø [mm] 0.9 - 3.0
strain relieF [n], min. 70
colour oF connector BodY bluegreenblackbeige
singlemode Pcsinglemode APc
multimode 50 µmmultimode 62.5 µm
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
ProPertIes• single-fiber connector• simplex, duplex horizontal and vertical• Push-pull locking mechanism• APc-version with angled polished ferrule endfaces (8°)• spring loaded ferrule, aligned in slotted sleeve• tuning possible
mU-simplex
mU APc
mU-duplex-horizontal mU-compact Adapter, further adapter types see pages 74/75
43
54
43
54
23.6
14.1
3.95
4.4
6.6
3.95
4.4
65ROSENBERGER OSI PRODUCT CATALOG
connectors
con
nec
tors
1
PArtnUmbers
coMponents
connector BodY, siMplexsinglemode Pc, bluesinglemode APc, greenmultimode 50 µm, blackmultimode 50 µm, black, low loss typemultimode 62.5 µm, beige
98 mUs 120-10198 mUs 110-10198 mUs 130-10198 mUs 130-10398 mUs 130-105
connector BodY, duplexsinglemode Pc, bluesinglemode APc, greenmultimode 50 µm, blackmultimode 50 µm, black, low loss typemultimode 62.5 µm, beige
98 mUs 120-10298 mUs 110-10298 mUs 130-10298 mUs 130-10498 mUs 130-106
connector BodY, coMpactsinglemode Pc, bluesinglemode APc, greenmultimode 50 µm, black, low loss typemultimode 62.5 µm, beige
98 mUs 120-20198 mUs 110-20198 mUs 130-20198 mUs 130-202
criMp rings [mm]Ø 1.6 - 2.1Ø 2.8 - 3.5
98 Zc 06-00098 Zc 07-000
Boot, Ø 0.9 mm For BuFFered FiBerbluegreenblackyellowred
98 Zb 07-0bU98 Zb 07-0gn98 Zb 07-0bK98 Zb 07-0ye98 Zb 07-0rd
Boot, Ø 1.6 - 2.1 mm caBlebluegreenblackwhite
98 Zb 02-0bU98 Zb 02-0gn98 Zb 02-0bK98 Zb 02-0wh
Boot, Ø 2.8 - 3.5 mm caBlebluegreenblackyellowred
98 Zb 04-0bU98 Zb 04-0gn98 Zb 04-0bK98 Zb 04-0ye98 Zb 04-0rd
dImensIons
66 ROSENBERGER OSI PRODUCT CATALOG
connectors
APPlIcAtIons• sc: lAn - cabling according to en 50173
sAn and data center• sc APc: mobile communication wdm / dwdm system
mAn and wAn cAtV
sc(Pc 0° - APc 8° and 9°)
sc-simplex
sc-duplexsc APc
Adapter, further adapter types see pages 74/75
technIcAl dAtA
standardIec 61754-4en 50377-4
Ferrule Ø [mm] 2.5 Zirconia ceramic
insertion loss 1 [dB], max. 0.40
return loss 2 [dB], min. 20455565
multimode Pcsinglemode Pc
singlemode UPcsinglemode APc
teMperature range [°c] -40 to +85 dependent on cable type
Mating cYcles, min. 1000
caBle Ø [mm] 0.9 - 3.5
strain relieF [n], min. 100
colour oF connector BodY bluegreen
green, red bootblackbeige
singlemode Pcsinglemode APc 8°singlemode APc 9°multimode 50 µm
multimode 62.5 µm
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
ProPertIes• single-fiber connector• simplex and duplex• Push-pull locking mechanism• APc-version with angled polished ferrule endfaces (8° or 9°)• spring loaded ferrule, aligned in slotted sleeve• tuning possible
45.4
56.1
24.8
27
8.95
7.350.
9
12.7
9.6
67ROSENBERGER OSI PRODUCT CATALOG
connectors
con
nec
tors
1
PArtnUmbers
coMponents
connector BodYsinglemode Pc, bluesinglemode APc, greenmultimode 50 µm, blackmultimode 62.5 µm, beige
98 scs 120-10198 scs 110-10198 scs 130-10198 scs 130-102
duplex clip black 98 Zd 02-0bK
criMp rings [mm]Ø 2.1Ø 2.8 - 3.5
98 Zc 05-00098 Zc 04-000
Boot, Ø 0.9 mm BuFFered FiBerbluegreenblackyellowred
98 Zb 06-0bU98 Zb 06-0gn98 Zb 06-0bK98 Zb 06-0ye98 Zb 06-0rd
Boot, Ø 2.1 mm caBlebluegreenblackyellowred
98 Zb 05-0bU98 Zb 05-0gn98 Zb 05-0bK98 Zb 05-0ye98 Zb 05-0rd
Boot, Ø 2.8 - 3.5 mm caBlebluegreenblackyellowred
98 Zb 04-0bU98 Zb 04-0gn98 Zb 04-0bK98 Zb 04-0ye98 Zb 04-0rd
dImensIons
68 ROSENBERGER OSI PRODUCT CATALOG
connectors
APPlIcAtIons• lAn• mAn and wAn• Instruments
ProPertIes• single-fiber connector• simplex, duplex and duplex-compact
e-2000™ / lsh(Pc 0° and hrl/APc 8°)
e-2000™ simplex
e-2000™ duplex-compact e-2000™ duplex
Adapter, further types see pages 74/75
metal/ceramic ferrule
technIcAl dAtA
standardIec 61754-15en 50377-8
Ferrule Ø [mm] 2.5Zirconia ceramic
or metal/ceramic composite
insertion loss 1 [dB], max.0.250.40
singlemode multimode
return loss 2 [dB], min. 20455570
multimode Pcsinglemode Pc
singlemode UPcsinglemode APc
teMperature range [°c] -40 to +85 dependent on cable type
Mating cYcles, min. 1000
caBle Ø [mm] 0.9 - 3.3 diamond up to 3.5
strain relieF [n], min. 100
colour oF connector BodYblue
greenblack
singlemode Pcsinglemode APc
multimode 50 µm + 62.5 µm
protection cap metal or plastics diamond metal only
singleMode tuningoptional
Active fiber core alignment type r+m
type diamond
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
• latched push-pull locking mechanism: a lever has to be pressed for unmating
• Automatically closing dust cover• APc-version with angled polished ferrule endface (8°)• spring loaded ferrule, aligned in slotted sleeve• tuning possible• Version with active fiber core alignment available
e-2000™ is a registered trademark of diamond s.A.
ceramic ferrule
69ROSENBERGER OSI PRODUCT CATALOG
connectors
con
nec
tors
1
multimode male
multimode female
Mtp® / Mpo
APPlIcAtIons• sAn and data center• lAn
ProPertIes• multi-fiber connectivity system• spring loaded ferrule, aligned by pins• 4, 8, 12 or 24 fibers• Push-pull locking mechanism
technIcAl dAtA
standard Iec 61754-7
Ferrule [mm] 2.5 x 6.5 Precision plastic composite
insertion loss 1 [dB], max.0.600.35
singlemode multimode
return loss 2 [dB], min. 2055
multimode Pcsinglemode APc
teMperature range [°c] -40 to +80 dependent on cable type
Mating cYcles, min. 1000
caBle Ø [mm]3
3 x 5round cableribbon cable
strain relieF [n], min. 70
colour oF connector BodY greenblackbeige
singlemodemultimode 50 µm (also om3)
multimode 62.5 µm
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
mtP® is a registered trademark of Us conec ltd.
mtP/mPo® Adapter, further adapter types see pages 74/75
70 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• lAn• sAn and data center
Mt-rJ
technIcAl dAtA
standard Iec 61754-18
Ferrule [mm] 2.5 x 4.5 Precision plastic composite
insertion loss 1 [dB], max. 0,6
return loss 2 [dB], min. 2035
multimode Pcsinglemode Pc
teMperature range [°c] -40 to +80 dependent on cable type
Mating cYcles, min. 500
caBle Ø [mm]2,9
2 x 1.8ribbon cablemini-zipcord
strain relieF [n], min. 70
colour oF connector BodY blueblackbeige
singlemodemultimode 50 µm
multimode 62.5 µm
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
ProPertIes• small form factor (sff) duplex connector• latched push-pull locking mechanism:
a lever has to be pressed for unmating• spring loaded ferrule, aligned by pins
male, 50 µm
female, 62,5 µm mt-rJ Adapter, further adapter types see pages 74/75
connectors
71ROSENBERGER OSI PRODUCT CATALOG
Fc(Pc 0° and APc 8°)
APPlIcAtIons• mobile communication• mAn and wAn• measurement tools• cAtV
ProPertIes• single-fiber connector• screwed locking mechanism• spring loaded ferrule, aligned in slotted sleeve• tuning possible• metal connector body
technIcAl dAtA
standardIec 61754-13en 50377-2
fc Pcfc Pc and fc APc
Ferrule Ø [mm] 2.5 Zirconia ceramic
insertion loss 1 [dB], max. 0.4
return loss 2 [dB], min. 20455565
multimode Pcsinglemode Pc
singlemode UPcsinglemode APc
teMperature range [°c] -40 to +85 dependent on cable type
Mating cYcles, min. 1000
caBle Ø [mm] 0.9 - 3.0
strain relieF [n], min. 100
singleMode tuning optional
FiBer tYpes 9/12550/125
62.5/125other fiber types on request
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
fc Pc fc APc fc Adapter, further adapter types see pages 74/75
con
nec
tors
1
connectors
72 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• lAn
not any longer recommended for cabling systems according to Iso/Iec 11801 and en 50173
• Industry – e.g. bus systems
st
type: ceramic
type: metal
technIcAl dAtA
standardIec 61754-2, mIl-c-83522
Iec 60874-10
Ferrule Ø [mm] 2.5 metal or ceramic versions
insertion loss 1 [dB], max. 0.4
return loss 2 [dB], min. 204045
multimode Pcsinglemode Pc
singlemode UPc
teMperature range [°c] -40 to +85 dependent on cable type
Mating cYcles, min. 1000
caBle Ø [mm] 0.9 - 3.0
strain relieF [n], min. 100
FiBer tYpes 9/12550/125
62,5/125100/140200/230
other fiber types on request
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
ProPertIes• single-fiber connector• simplex and duplex• bayonet locking mechanism• tuning possible• metal connector body
st Adapter, further adapter types see pages 74/75
connectors
73ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• mobile communication• mAn and wAn• measurement tools
din / lsa (Pc 0° – APc 8°)
technIcAl dAtA
standardIec 61754-3,
former dIn 47256
Ferrule Ø [mm] 2.5 Zirconia ceramic
insertion loss 1 [dB], max. 0.4
return loss 2 [dB], min. 204555
multimode Pcsinglemode Pc
singlemode UPc
teMperature range [°c] -40 to +85 dependent on cable type
Mating cYcles, min. 1000
caBle Ø [mm] 0.9 - 3.5
strain relieF [n], min. 100
singleMode tuningoptional
Active fiber core alignmenttype standardtype diamond
FiBer tYpes 9/12550/125
62.5/125other fiber types on request
1 =according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
ProPertIes• single-fiber connector• screwed locking mechanism• spring loaded ferrule, aligned in slotted sleeve• tuning possible• metal connector body
type 1: ceramic type diamond: metal / ceramic
dIn/lsA adapter, further adapter types see pages 74/75
connectors
con
nec
tors
1
74 ROSENBERGER OSI PRODUCT CATALOG
adapter
connectors AdAPter
PArtnUmbers
coMponents
adapter, lc-duplex, sc-Footprint monomode, Pc, bluemonomode, APc, greenmultimode, 50 µm, blackmultimode, 50 µm om3, turkquoisemultimode, 50 µm om4, purplemultimode, 62.5 µm, beige
98 lcK8 lc-K00-bu98 lcK8 lc-K00-gn98 lcK8 lc-K00-bk98 lcK8 lc-K00-tk98 lcK8 lc-K00-vt98 lcK8 lc-K00-be
adapter, lc-duplex, norM-tYpemonomode, Pc, bluemonomode, APc, greenmultimode, 50 µm, blackmultimode, 50 µm om3, turkquoisemultimode, 50 µm om4, purplemultimode, 62.5 µm, beige
98 lcK8 lc-K01-bu98 lcK8 lc-K01-gn98 lcK8 lc-K01-bk98 lcK8 lc-K01-tk98 lcK8 lc-K01-vt98 lcK8 lc-K01-be
adapter, lc-Quad For 2 x duplex connectormonomode, Pc, bluemonomode, APc, greenmultimode, 50 µm, blackmultimode, 50 µm om3, turkquoisemultimode, 50 µm om4, purplemultimode, 62.5 µm, beige
98 lcK7 lc-K00-bu98 lcK7 lc-K00-gn98 lcK7 lc-K00-bk98 lcK7 lc-K00-tk98 lcK7 lc-K00-vt98 lcK7 lc-K00-be
adapter, Mu-duplex, horizontal-tYpemonomode, Pc, bluemonomode, APc, greenmultimode, 50 µm, blackmultimode, 50 µm om3, turkquoisemultimode, 50 µm om4, purplemultimode, 62.5 µm, beige
98 mUK8 mU-K01-bu98 mUK8 mU-K01-gn98 mUK8 mU-K01-bk98 mUK8 mU-K01-tk98 mUK8 mU-K01-vt98 mUK8 mU-K01-be
Adapter with non-standard flange or with integrated protection shutter on request
mU-duplex,horizontal type
lc-duplex, sc footprint
lc-duplex, standard type
lc-Quad adapter
75ROSENBERGER OSI PRODUCT CATALOG
connectors AdAPter
Ad
APt
er
1
PArtnUmbers
coMponents
adapter, sc-duplex, Metal version, colour coded plastic insertmonomode, Pc, bluemonomode, APc, greenmultimode, beige
98 scK7 sc-K00-bu98 scK7 sc-K00-gn98 scK7 sc-K00-be
adapter, sc-duplex, plastics versionmonomode, Pc, bluemonomode, APc, greenmultimode, beige
98 scK8 sc-K00-bu98 scK8 sc-K00-gn98 scK8 sc-K00-be
adapter, e-2000™, siMplexmonomode, Pc, bluemonomode, hrl, greenmultimode, black
adapter, e-2000™, duplexmonomode, Pc, bluemonomode, hrl, greenmultimode, Pc black
adapter, e-2000™, coMpactmonomode, Pc, bluemonomode, hrl, greenmultimode, Pc black
adapter, Mtp®/ Mpomultimode 50 µm om4, purplemonomode a. multimode, black
other adapters, furthermore hybrid types to connect different connector systems on request.
hybrid adapter, st-escon
sc-duplex,metal version
sc-duplex,plastic version
e-2000™ simplex
e-2000™ compact
fc-Pc, version with rectangular flange
fc-Pc for d-hole mountingst
mtP®/ mPo
In addition to the listed product range, we provide further adapter types, e.g. hybrid types, adapter for special mounting or with integrated shutter.
Please contact us for technical data and details. we would be pleased to assist you.
mtP® is a registered trademark of Us conec ltd.
76 ROSENBERGER OSI PRODUCT CATALOG
connectors oPtIcAl contActs
Mini contact
technIcAl dAtA
Ferrule Ø [mm] 1.25 metal or zirconia ceramic
insertion loss 1 [dB], max. 0.70
return loss 2 [dB], min. 45
teMperature range [°c] -40 to +85 dependent on cable type
Mating cYcles, min. 500
caBle Ø [mm]0,91.7
buffered fibersimplex cable
FiBer tYpes9/125
50/12562.5/125
other fiber types on request
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
PArtnUmbers
caBle tYpe singleModepin contact
singleModesocket contact
MultiModepin contact
MultiModesocket contact
Ø 0.9 mm 9 8 m s 3 0 1 - 1 2 6 9 8 m K 3 0 1 - 1 2 6 9 8 m s 1 0 1 - 1 2 8 9 8 m K 1 0 1 - 1 2 8
Ø 0.9 mmwith customized fiber bore
– – 9 8 m s 1 0 1 - x x x 9 8 m K 1 0 1 - x x x
xxx has to be replaced by the requested fiber guiding bore diameter
APPlIcAtIons• communication electronics• medical devices• suitable for connections to modular boards or compo-
nents in backplanes, also in combination with coaxial or power contacts from rosenberger.
ProPertIes• snap-on assembly (retension clip)• disassembly with release tool• hybrid connections by combination with coaxial or
power contacs
77ROSENBERGER OSI PRODUCT CATALOG
connectors oPtIcAl contActs
oPt
IcA
l co
ntA
cts
din contact
1technIcAl dAtA
Ferrule Ø [mm] 2.5 metal or zirconia ceramic
insertion loss 1 [dB], max. 0.7 multimode
teMperature range [°c] -40 to +85 dependent on cable type
Mating cYcles, min. 500
caBle Ø [mm]0.92.22.9
buffered fiberPof cable
simplex cable
FiBer tYpes 50/12562.5/125
200/230 hcsPof Ø 1 mm
other fiber types on request
1 = according to Iec 61300-3-4, method b against reference
PArtnUmbers
tYpe pin contact socket contact
Zirconia ceramic ferrulemetal ferrulefiber hcs 200/230 µmPofcustomized fiber bore
98 Is 601-12798 Is 101-12898 Is 101-235 98 Is 450-106098 Is 101-xxx
98 IK 601-12798 IK 101-12898 IK 101-235 98 IK 450-106098 IK 101-xxx
release tool 9 8 w 1 2 - I n s/2 0 0
xxx has to be replaced by the requested fiber guiding bore diameter
APPlIcAtIons• Industry• communication electronics• medical devices• Use in connectors according to dIn en 60603-2,
version m and d-sub types• suitable for connections to modular boards or compo-
nents in backplanes, also in combination with coaxial or power contacts from rosenberger.
ProPertIes• snap-on assembly (retension clip)• disassembly with release tool• hybrid connections in combination with rosenberger
coaxial or power contacs• enables customized layouts even in small production series
78 ROSENBERGER OSI PRODUCT CATALOG
expanded BeaM contact #5
APPlIcAtIons• Industry• offshore and mining• broadcast• Aerospace technology• Use in ArInc 600 connectors• for circular and rectangular housings
ProPertIes• less susceptible against contamination due to
expanded beam technology• easy cleaning due to cover glass of fused silica• compensation of tolerances and movements within the
connector by spring loaded front part• Integrated release ring for insertion and removal
without tool• snap-on alignment sleeve
technIcAl dAtA
Ferrule Ø [mm] 6 lensed ferrule
insertion loss 1 [dB], typ. 1.0
teMperature range [°c] -40 to +85 dependent on cable type
caBle Ø [mm] 0.9 - 3.0
FiBer tYpes 50/12562.5/125
1 = according to Iec 61300-3-4, method b against reference
connectors oPtIcAl contActs
79ROSENBERGER OSI PRODUCT CATALOG
oPt
IcA
l co
ntA
cts
expanded BeaM contact #12
1APPlIcAtIons• Industry• medical devices• offshore and mining• broadcast• for circular connectors according to mIl-dtl-38999
ProPertIes• Very robust• low susceptibility for contamination• Insertion and removal with standard tools for #12
technIcAl dAtA
speciFication compatible with mIl-dtl-38999 for use in cavities #12
Ferrule Ø [mm] 2.3 lensed ferrule
insertion loss 1 [dB], typ. 1.5
teMperature range [°c] -40 to +85 dependent on cable type
caBle Ø [mm] 0.9 - 2.0
FiBer tYpes 50/12562.5/125
1 = according to Iec 61300-3-4, method b against reference
connectors oPtIcAl contActs
PArtnUmbers
insertion tool 98 w 12-s12/100
reMoval tool 98 w 12-s12/200
80 ROSENBERGER OSI PRODUCT CATALOG
optical contact #16
APPlIcAtIons• Industry• Aerospace technology• medical devices
ProPertIes• modular system for design of customized contact layouts• Pin and socket contacts compatible with
mIl-Prf-29504/4 and /5• suitable for circular connectors according to
mIl-dtl-38999 with cavities #16
technIcAl dAtA
standardcompatible with
mIl-Prf-29504/4 and /5
Ferrule Ø [mm] 1.58 Zirconia ceramic
insertion loss 1 [dB] 0.7 typ.
teMperature range [°c] -40 to +85 dependent on cable type
caBle Ø [mm] 0.9 - 2.0
FiBer tYpes 9/12550/125
62.5/125
1 = according to Iec 61300-3-4, method b against reference
connectors oPtIcAl contActs
32 23.4
Ø 2
.9
Ø 3
.3
Ø 3
.3
Ø 1
.59
81ROSENBERGER OSI PRODUCT CATALOG
oPt
IcA
l co
ntA
cts
1
PArtnUmbers
caBle tYpe pin contact socket contact
Ø 1.1 mm singleMode 98 Ps 302-126 98 PK 302-126
to Ø 2.1mm singleMode 98 Ps 303-126 98 PK 303-126
Ø 1.1 mm MultiMode 98 Ps 602-127 98 PK 602-127
to Ø 2.1mm MultiMode 98 Ps 603-127 98 PK 603-127
poF 980/1000/2.2 98 Ps 450-1060 98 PK 450-1060
insertion tool 98 w 12-s16/100
reMoval tool 98 w 12-s16/200
polishing tool 98 w 008-000
connectors oPtIcAl contActs
dImensIons
82 ROSENBERGER OSI PRODUCT CATALOG
connectors heAVy dUty
rosenBerger duplex connector (rdc)
APPlIcAtIons• mobile communication• broadcast• outdoor areas• harsh environment
ProPertIes• robust 2 fiber connector with screwed locking mechanism• components of the n coaxial connector according to
mIl-Prf-39012 enable a conversion within the standard panel cutout.
• captive protection cap available
technIcAl dAtA
Ferrule Ø [mm] 2 x 1.25 Zirconia ceramic
insertion loss 1 [dB], max. 0.50
return loss 2 [dB], min. 50 singlemode
teMperature range [°c] -40 to +125 dependent on cable type
ingress protection grade IP67 Iec 60529
Mating cYcles, min. 1000
caBle Ø [mm]4 - 7
1.7 or 2.1(mini) breakoutsimplex cable
FiBer tYpes 9/12550/125
62.5/125other fiber types on request
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
83ROSENBERGER OSI PRODUCT CATALOG
connectors heAVy dUty
heA
Vy
dU
ty
1
rosenBerger Quad connector (rQc)
APPlIcAtIons• mobile communication• broadcast• outdoor areas• harsh environment
ProPertIes• robust 4 fiber connector with screwed locking mechanism• components of the n coaxial connector according to
mIl-Prf-39012 enable a conversion within the standard panel cutout.
• captive protection cap available
technIcAl dAtA
Ferrule Ø [mm] 4 x 1.25 Zirconia ceramic
insertion loss 1 [dB], max. 0,50
return loss 2 [dB], min. 50 singlemode
teMperature range [°c] -40 to +125 dependent on cable type
ingress protection grade IP67 Iec 60529
Mating cYcles, min. 1000
caBle Ø [mm]4 - 7 1.7
(mini) breakoutsimplex cable
FiBer tYpes 9/12550/125
62.5/125other fiber types on request
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
84 ROSENBERGER OSI PRODUCT CATALOG
heavY dutY 600
technIcAl dAtA
Ferrule Ø [mm] 2/4/6 x 2.5 Zirconia ceramic
electrical contacts2 x 680V, 10A
2 x 60V, 1Adependent on configuration
optical insertion loss 1 [dB], max. 0,6
return loss 2 [dB], min. 204565
multimode Pcsinglemode Pc
singlemode APc
teMperature range [°c] -40 to +85 dependent on cable type
ingress protection grade IP67 Iec 60529
Mating cYcles, min. 5000
caBle Ø [mm]6.0 - 12.01.7 - 2.2
cable connectorconnecting cables
FiBer tYpes 9/12550/125
62.5/125other fiber types on request
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
APPlIcAtIons• broadcast, e.g. hdtV camera systems• hybrid connection to distribution points• mining
ProPertIes• hermaphrodite – 2 identical interfaces can be connected
together without further accessories• 2, 4 or 6 fibers and up to 4 electrical contacts, singlemode
ferrules also available as APc (8°) type
connectors heAVy dUty
85ROSENBERGER OSI PRODUCT CATALOG
heA
Vy
dU
ty
heavY dutY 1000
1
technIcAl dAtA
Ferrule Ø [mm] 12 x 2.5 Zirconia ceramic
electrical contacts 2 x 1.5optional
grounding contact
optical insertion loss 1 [dB], max. 0.6
return loss 2 [dB], min. 204565
multimode Pcsinglemode Pc
singlemode APc
teMperature range [°c]-40 to +60 (in operation)-40 to +85 (storage)
dependent on cable type
ingress protection grade IP67 Iec 60529
Mating cYcles, min. 1000
caBle Ø [mm]6.0 - 16.01.7 - 2.2
cable connectorconnecting cables
FiBer tYpes 9/12550/125
62.5/125other fiber types on request
1 = according to Iec 61300-3-4, method b against reference, 2 = according to Iec 61300-3-6, method 1 against reference
APPlIcAtIons• broadcast• hybrid connector for test bed• mining and offshore
ProPertIes• hermaphrodite - 2 identical interfaces can be connected
together without further accessories• 12 fibers, singlemode ferrules also available as APc (8°) type• option for 2 electrical contacts and grounding contact• housing in metal or plastic material
connectors heAVy dUty
86 ROSENBERGER OSI PRODUCT CATALOG
laser connect 100
technIcAl dAtA
Ferrule Ø [mm] 3.17
FiBer guiding Bore Ø [μm] 100 - 1100
connector length Without Boot [mm]long versionshort versionmini version
45 3022
teMperature range [°c] -25 to +150 dependent on fiber/cable type
strain relieF, max. [n] ≥ 100 dependent on fiber type and
assembly method
Materialsferruleconnector bodyProtection cap
metal (suitable for sterilising)metal (suitable for sterilising)
Polyethylene or PeeK (suitable for sterilising)
APPlIcAtIons• medical and industrial laser systems• laser launch in sensor systems• measurement tools
ProPertIes• compatible to f-smA• suitable for laser launch and emission within the medium
power range due to freestanding fiber• Adaption to various fiber, buffer and cable diameters by
modular connector system and large accessory range.• easy handling with non-slip coupling nut• long version enables to connect deep coupling lenses• documentation of beam characteristics on request• Plug-and-play cable assemblies available
connectors lAser connect
87ROSENBERGER OSI PRODUCT CATALOG
lAse
r co
nn
ect
1
connectors lAser connect
PArtnUmbers
coMponent
protection cap 98 fs 100 - xxx / 50
screWed protection capsuitable for sterilising
98 fs 100 - xxx / 30
Mini connector 98 fs 201 - xxx
short connector 98 fs 203 - xxx
long connector 98 fs 205 - xxx
claMp Ø [mm]0.450.520.751.001.301.50
98 lsZK / 045098 lsZK / 052098 lsZK / 075098 lsZK / 102098 lsZK / 130098 lsZK / 1500
Fixing screW Ø [mm]0.600.901.50
98 ls Z6 / 060098 ls Z6 / 090098 ls Z6 / 1500
Boot Ø [mm]0.902.102.90
98 Z 108 sw98 Z 107 sw98 Z 106 sw
Flange receptacle 98 lK 110
JaM nut receptacle 98 lK 100
All dimensions in [mm]xxx has to be replaced by the requested fiber guiding bore diameter
88 ROSENBERGER OSI PRODUCT CATALOG
laser connect high poWer
APPlIcAtIons• Industrial laser systems• high power laser launch• laser machining• welding robots
ProPertIes• high power up to 40 Kw with a new conic prism
and utilization of total reflection• Protection of fiber cladding by deflection of inoperative
radiation• enhanced endurance by high purity air cooling and active
cleaning of the fiber surface• Integrated mode scrambler to prevent bad welding points
connectors lAser connect
technIcAl dAtA
interFace llK-b or llK-d
suitaBle FiBer tYpes core-Ø 200, 400, 600 µm other Ø on request
cooling sYsteM Air and water cooling
overall length approx. 240 mm
Max. diaMeter approx. Ø 50 mm
range oF asseMBlY length 5 - 100 m
saFetY sYsteM fiber break detection with test impedance According to german automotive standard
89ROSENBERGER OSI PRODUCT CATALOG
lAse
r co
nn
ect
/ fU
rth
er c
on
nec
tor
tyPe
s
Further connector tYpes
1
connectors fUrther connector tyPes
In addition to the listed product line, we provide a range of further connectors. they are produced or assembled according to the same high quality standards.
this label guarantees rosenberger Quality without compromise. connectors produced by rosenberger can be recognized by the ”rt“ (rosenberger tittmoning) stamp. with each product, you decide for cabling competence on the highest level: powerfull and endurable solutions of the rosenberger group.
f-smA (acc. to Iec 61754-22)
escon®
fddI
heAVy dUty sc-rJ
on request, we are able to customize connectors to meet particular categories or specifications.
Please contact us for technical data and details. we would be pleased to assist you.
rosenBerger QualitY signet
93ROSENBERGER OSI PRODUCT CATALOG
2AssemblIes: Preconnect® fIber
fiber optic technology was and will be forever our core competence. from the classical Preconnect® fIber trunk over Parallel optics high speed links or customized special require-ments – with each Preconnect® fIber product from rosenberger osI you decide for 20 years of know how and outstanding quality.
our Preconnect® fIber products present holi-stic solutions for structured fiber optic cabling. whether it is in data centers, industry, mobile communications or broadcast – rosenberger osI offers perfectly matching components for each application environment.
94 ROSENBERGER OSI PRODUCT CATALOG
preconnect® FiBer trunk
APPlIcAtIons• Infrastructure cabling of data centers, office buildings and
campus cabling
ProPertIes• see technology description on pages 48 – 50• both sides factory assembled with fo connectors• standard light propagation ”channelwise crossed“
(pairwise flipped)• cable length up to 2,000 m, longer on request
length defInItIon• order length: length between the connectors at the lon-
gest legs at both sides (not between the cable dividers)• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
• leg lengths on both sides stepped acc. to table page 95, suited for application in distribution panels
cAble tyPes• with all standard loose tube cables up to 144 fibers
available• cable data sheets on request
fIber tyPes • with all standard fiber types available• fiber data sheets on request
connectors• with all standard connectors available,
simplex as well as duplex versions
oPtIonAl• cable with increased tensile strength and crush resistance• cable with special armoring• hybrid cable with different types of fiber• hybrid connector assembling• single-sided factory assembled• otdr measured with measurement report• return loss (rl) measurement
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels behind both cable dividers• dependent on the length as cable ring, on cardboard
or wooden drum
AssemblIes Preconnect® fIber
leg lengths on both sides stepped acc. to table page 95,suited for application in distribution panels
Installation tube outdoor,IP67 water-proof
Installation tube Indoor,IP50 dust-proof
95ROSENBERGER OSI PRODUCT CATALOG
preconnect® FiBer trunkefficiency Indoor cable with mini loose tubes
Pre
con
nec
t® f
Iber
2
PArtnUmbers
nuMBer oF FiBers / connectors
os2 9/125
oM3 50/125
oM4 50/125
36 lc-compactmU-duplex-horizontal mtP® 12-female
024A0100 g657 A024A0110 g657 A024A0130 g657 A
024A0101 om3024A0111 om3024A0131 om3
024A0101 om4024A0111 om4024A0131 om4
48lc-compactmU-duplex-horizontal mtP® 12-female
024A0102 g657 A024A0112 g657 A024A0132 g657 A
024A0103 om3024A0113 om3024A0133 om3
024A0103 om4024A0113 om4024A0133 om4
72lc-compactmU-duplex-horizontal mtP® 12-female
024A0104 g657 A024A0114 g657 A024A0134 g657 A
024A0105 om3024A0115 om3024A0135 om3
024A0105 om4024A0115 om4024A0135 om4
96lc-compactmU-duplex-horizontalmtP® 12-female
024A0106 g657 A024A0116 g657 A024A0136 g657 A
024A0107 om3024A0117 om3024A0137 om3
024A0107 om4024A0117 om4024A0137 om4
144lc-compactmU-duplex-horizontal mtP® 12-female
024A0108 g657 A024A0118 g657 A024A0138 g657 A
024A0109 om3024A0119 om3024A0139 om3
024A0109 om4024A0119 om4024A0139 om4
other fiber types, connector types and numbers of fibers on request. mtP® is a registered trademark of Us-conec ltd.
technIcAl dAtA Preconnect® fIber trUnKs
nuMBer oF FiBers 4 8 12 16 24 36 48 72 96 144
leg length stepped [cm] approx. 85-100 65-100 65-95 65-94 65-100 65-90 65-98 65-90 95-110 95-125
diaMeter installation tuBe [mm] approx. 28 28 28 35 35 60 60 60 75 75
Max. tensile strength installation tuBe [n] 600 600 600 600 600 600 600 600 600 600
crush resistance installation tuBe [n/cm] 30 30 30 30 30 30 30 30 30 30
technIcAl dAtA cAble tyPe I-b(Zn)bh n x m
caBle design stranded Mini loose tuBes
nuMBer oF FiBers, max. 36 48 72 96 144
outer-Ø [mm] 8 8 8.4 9.4 11.4
Max. tensile strength [n] 3000 3000 3000 3000 3000
Max. crush resistance [n/dm] 1000 1000 1000 1000 1000
Min. Bending radius [mm] static dynamic
80120
80120
84126
94141
114171
Fire load [MJ/m] 0.69 0.69 0.73 0.92 1.43
”comPArIson mAtrIX cAble ProPertIes U-dQ(Zn)bh Vs. I-b(Zn)bh“ see page 101.
AssemblIes Preconnect® fIber
cable type I-b(Zn)bh 6 x 12
96 ROSENBERGER OSI PRODUCT CATALOG
preconnect® FiBer trunkUniversal cable with loose tube design
PArtnUmbers
nuMBer oF FiBers / connectors
os2 9/125
oM3 50/125
oM4 50/125
4
sc-duplex
lc-compact
mU-duplex-horizontal
e-2000™ simplex1 hrl
031A1501031A1210031A2001031A1011
031A1601 om3031A1212 om3031A2011 om3
–
031A1601 om4031A1212 om4031A2011 om4
–
8
sc-duplex
lc-compact
mU-duplex-horizontal
e-2000™ simplex1 hrl
031A1503031A0920031A2002031A1012
031A1603 om3031A0921 om3031A2012 om3
–
031A1603 om4031A0921 om4031A2012 om4
–
12
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
031A1504031A1800031A2003031A0912031A1013
031A1604 om3031A1810 om3031A2013 om3031A0922 om3
–
031A1604 om4031A1810 om4031A2013 om4031A0922 om4
–
16
sc-duplex
lc-compact
mU-duplex-horizontal
e-2000™ simplex1 hrl
031A1505031A1818031A2004031A1014
031A1605 om3031A1220 om3031A2014 om3
–
031A1605 om4031A1220 om4031A2014 om4
–
24
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
031A1506031A1801031A2005031A0914031A1015
031A1606 om3031A1811 om3031A2015 om3031A0924 om3
–
031A1606 om4031A1811 om4031A2015 om4031A0924 om4
–
nuMBer oF FiBers / connectors
os2 9/125
oM3 50/125
oM4 50/125
36
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
031A1507031A1802031A2006031A0913031A0998
031A1607 om3031A1812 om3031A2016 om3031A0923 om3
–
031A1607 om4031A1812 om4031A2016 om4031A0923 om4
–
48
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
031A1508031A1803031A2007031A0915031A1016
031A1608 om3031A1813 om3031A2017 om3031A0925 om3
–
031A1608 om4031A1813 om4031A2017 om4031A0925 om4
–
72
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
031A1509031A1804031A2008031A0917031A1017
031A1609 om3031A1814 om3031A2018 om3031A0927 om3
–
031A1609 om4031A1814 om4031A2018 om4031A0927 om4
–
96lc-compact
mU-duplex-horizontal
mtP® 12-female
031A1805031A1999031A0916
031A1815 om3031A1998 om3031A0926 om3
031A1815 om4031A1998 om4031A0926 om4
144lc-compact
mU-duplex-horizontal
mtP® 12-female
031A1806031A2009031A0918
031A1816 om3031A2019 om3031A0928 om3
031A1816 om4031A2019 om4031A0928 om4
1 = type r+m with zirconia ceramic ferrule.APc and hrl connectors with 8° angled ferrule endfaces.other fiber types, connector types and numbers of fibers on request. mtP® is a registered trademark of Us-conec ltd.
AssemblIes Preconnect® fIber
technIcAl dAtA cAble tyPe U-dQ(Zn)bh n x m
caBle design central loose tuBe stranded loose tuBes
nuMBer oF FiBers, max. 12 24 36 48 72 96 144
outer-Ø [mm] 7 7.5 12.5 12.5 13.4 14.4 17.7
Max. tensile strength [n] 1750 1750 6000 6000 6000 6000 6000
Max. crush resistance [n/dm] 1500 1500 3000 3000 3000 3000 3000
Min. Bending radius [mm] static dynamic
105140
115150
190250
190250
200270
215290
270355
Fire load [MJ/m] 0.71 0.79 3.1 3.1 3.2 3.4 4.5
”comPArIson mAtrIX cAble ProPertIes U-dQ(Zn)bh Vs. I-b(Zn)bh“ see page 101.
cable type U-dQ(Zn)bh 24 cable type U-dQ(Zn)bh 6 x 12
97ROSENBERGER OSI PRODUCT CATALOG
preconnect® FiBer trunkoutdoor cable with loose tube design
Prec
on
nec
t® f
Iber
2PArtnUmbers
nuMBer oF FiBers / connectors
os2 9/125
oM3 50/125
oM4 50/125
4
sc-duplex
lc-compact
mU-duplex-horizontal
e-2000™ simplex1 hrl
010A1501010A2081010A2001010A1011
010A1601 om3010A2082 om3010A2011 om3
–
010A1601 om4010A2082 om4010A2011 om4
–
8
sc-duplex
lc-compact
mU-duplex-horizontal
e-2000™ simplex1 hrl
010A1503010A0920010A2002010A1012
010A1603 om3010A0921 om3010A2012 om3
–
010A1603 om4010A0921 om4010A2012 om4
–
12
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
010A1504010A2079010A2003010A0912010A1013
010A1604 om3010A2080 om3010A2013 om3010A0922 om3
–
010A1604 om4010A2080 om4010A2013 om4010A0922 om4
–
16
sc-duplex
lc-compact
mU-duplex-horizontal
e-2000™ simplex1 hrl
010A1505010A1818010A2004010A1014
010A1605 om3010A1819 om3010A2014 om3
–
010A1605 om4010A1819 om4010A2014 om4
–
24
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
010A1506010A2077010A2005010A0914010A1015
010A1606 om3010A2078 om3010A2015 om3010A0924 om3
–
010A1606 om4010A2078 om4010A2015 om4010A0924 om4
–
nuMBer oF FiBers / connectors
os2 9/125
oM3 50/125
oM4 50/125
36
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
010A1507010A1802010A2006010A0913010A0998
010A1607 om3010A1812 om3010A2016 om3010A0923 om3
–
010A1607 om4010A1812 om4010A2016 om4010A0923 om4
–
48
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
010A1508010A1803010A2007010A0915010A1016
010A1608 om3010A1813 om3010A2017 om3010A0925 om3
–
010A1608 om4010A1813 om4010A2017 om4010A0925 om4
–
72
sc-duplex
lc-compact
mU-duplex-horizontal
mtP® 12-female
e-2000™ simplex1 hrl
010A1509010A1804010A2008010A0917010A1017
010A1609 om3010A1814 om3010A2018 om3010A0927 om3
–
010A1609 om4010A1814 om4010A2018 om4010A0927 om4
–
96lc-compact
mU-duplex-horizontal
mtP® 12-female
010A2075010A1999010A0916
010A2076 om3010A1998 om3010A0926 om3
010A2076 om4010A1998 om4010A0926 om4
144lc-compact
mU-duplex-horizontal
mtP® 12-female
010A1806010A2009010A0918
010A1816 om3010A2019 om3010A0928 om3
010A1816 om4010A2019 om4010A0928 om4
1 = type r+m with zirconia ceramic ferrule.APc and hrl connectors with 8° angled ferrule endfaces.other fiber types, connector types and numbers of fibers on request. mtP® is a registered trademark of Us-conec ltd.
AssemblIes Preconnect® fIber
technIcAl dAtA cAble tyPe A-dQ(Zn)b2y n x m
caBle design central loose tuBe stranded loose tuBes
nuMBer oF FiBers, max. 12 24 36 48 72 96 144
outer-Ø [mm] 7 7.5 11.4 11.4 12.3 13.7 17
Max. tensile strength [n] 1750 1750 4000 4000 4000 4000 4000
Max. crush resistance [n/dm] 1500 1500 3000 3000 3000 3000 3000
Min. Bending radius [mm] static dynamic
140185
145195
170230
170230
185245
205275
255340
Fire load [MJ/m] 1.1 1.2 3.1 3.1 3.2 3.4 4.5
operating temperature range: -25 °c to +70 °c, for robust outdoor applications see Preconnect® fIber trunk outdoor pages 110 / 111
cable type A-dQ(Zn)b2y 24 cable type A-dQ(Zn)b2y 6 x 12
98 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• Infrastructure cabling of data centers, sAn and serverfarms• Particularly appropriate for individual switch cabling in
data centers
ProPertIes• see technology description pages 48 – 50• both sides factory assembled with fo connectors• standard light propagation ”channelwise crossed“
(pairwise flipped)• cable length up to 2,000 m, longer on request• high flexibility due to application specific leg lengths, both
sides to be selected:• duplex connectors on 2.1 mm leg, leg lengths up to max.
3 m• compact connectors on 2.9 mm leg, leg lengths up to
max. 5 m
length defInItIon• order length: length between the connectors at the
longest legs at both sides (not between the cable dividers)• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
cAble tyPes• with all standard loose tube cables up to 144 fibers
available• cable data sheets on request
fIber tyPes • with all standard fiber types available• fiber data sheets on request
connectors• with all standard connectors available
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels behind both cable dividers• Application specific legs packed in dust-proof foil-tubes,
not in robust installation tubes• dependent on the length as cable ring, on cardboard or
wooden drum
AssemblIes Preconnect® fIber
preconnect® FiBer trunk Multi JuMper
Application specific leg lengths, both sides to be selected:· duplex connectors on 2.1 mm leg, leg lengths up to max. 3 m· compact connectors on 2.9 mm leg, leg lengths up to max. 5 m
Installation tube Indoor,IP50 dust-proof
99ROSENBERGER OSI PRODUCT CATALOG
preconnect® FiBer trunk Multi JuMperefficiency Indoor cable with mini loose tubes
AssemblIes Preconnect® fIber
Pre
con
nec
t® f
Iber
2PArtnUmbers
nuMBer oF FiBers / connectors os2 9/125
oM3 50/125
oM4 50/125
36
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
049 A 1940049 A 1901049 A 1396049 A 1921
049 A 1950 om3049 A 1911 om3049 A 1496 om3049 A 1931 om3
049 A 1950 om4049 A 1911 om4049 A 1496 om4049 A 1931 om4
48
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
049 A 1941049 A 1902049 A 1397049 A 1922
049 A 1951 om3049 A 1912 om3049 A 1497 om3049 A 1932 om3
049 A 1951 om4049 A 1912 om4049 A 1497 om4049 A 1932 om4
72
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
049 A 1942049 A 1903049 A 1398049 A 1923
049 A 1952 om3049 A 1913 om3049 A 1498 om3049 A 1933 om3
049 A 1952 om4049 A 1913 om4049 A 1498 om4049 A 1933 om4
96
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
049 A 1943049 A 1904049 A 1738049 A 1924
049 A 1953 om3049 A 1914 om3049 A 1784 om3049 A 1934 om3
049 A 1953 om4049 A 1914 om4049 A 1784 om4049 A 1934 om4
144
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
049 A 1944049 A 1905049 A 1399049 A 1925
049 A 1954 om3049 A 1915 om3049 A 1499 om3049 A 1935 om3
049 A 1954 om4049 A 1915 om4049 A 1499 om4049 A 1935 om4
other fiber types, connector types and numbers of fibers on request.
technIcAl dAtA cAble tyPe I-b(Zn)bh n x m
caBle design stranded Mini loose tuBes
nuMBer oF FiBers, max. 36 48 72 96 144
outer-Ø [mm] 8 8 8.4 9.4 11.4
Max. tensile strength [n] 3000 3000 3000 3000 3000
Max. crush resistance [n/dm] 1000 1000 1000 1000 1000
Min. Bending radius [mm] static dynamic
80120
80120
84126
94141
114171
Fire load [MJ/m] 0.69 0.69 0.73 0.92 1.43
”comPArIson mAtrIX cAble ProPertIes U-dQ(Zn)bh Vs. I-b(Zn)bh“ see page 101.
cable type I-b(Zn)bh 6 x 12
100 ROSENBERGER OSI PRODUCT CATALOG
preconnect® FiBer trunk Multi JuMper Universal cable with loose tube design
PArtnUmbers
nuMBer oF FiBers / connectors os2 9/125
oM3 50/125
oM4 50/125
12
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
041 A 2050041 A 1908041 A 1392041 A 1939
041 A 2060 om3041 A 1907 om3041 A 1492 om3041 A 1940 om3
041 A 2060 om4041 A 1907 om4041 A 1492 om4041 A 1940 om4
16
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
041 A 2051041 A 2040041 A 1393041 A 1927
041 A 2061 om3041 A 1928 om3041 A 1493 om3041 A 1926 om3
041 A 2061 om4041 A 1928 om4041 A 1493 om4041 A 1926 om4
other fiber types, connector types and numbers of fibers on request.
AssemblIes Preconnect® fIber
technIcAl dAtA cAble tyPe U-dQ(Zn)bh n x m
caBle design central loose tuBe stranded loose tuBes
nuMBer oF FiBers, max. 12 24 36 48 72 96 144
outer-Ø [mm] 7 7.5 12.5 12.5 13.4 14.4 17.7
Max. tensile strength [n] 1750 1750 6000 6000 6000 6000 6000
Max. crush resistance [n/dm] 1500 1500 3000 3000 3000 3000 3000
Min. Bending radius [mm] static dynamic
105140
115150
190250
190250
200270
215290
270355
Fire load [MJ/m] 0.71 0.79 3.1 3.1 3.2 3.4 4.5
”comPArIson mAtrIX cAble ProPertIes U-dQ(Zn)bh Vs. I-b(Zn)bh“ see page 101.
cable type U-dQ(Zn)bh 24 cable type U-dQ(Zn)bh 6 x 12
101ROSENBERGER OSI PRODUCT CATALOG
Prec
on
nec
t® f
Iber
2
PArtnUmbers
nuMBer oF FiBers / connectors os2 9/125
oM3 50/125
oM4 50/125
24
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
041 A 2052041 A 1900041 A 1394041 A 1920
041 A 2062 om3041 A 1910 om3041 A 1494 om3041 A 1930 om3
041 A 2062 om4041 A 1910 om4041 A 1494 om4041 A 1930 om4
36
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
041 A 2053041 A 1901041 A 1396041 A 1921
041 A 2063 om3041 A 1911 om3041 A 1496 om3041 A 1931 om3
041 A 2063 om4041 A 1911 om4041 A 1496 om4041 A 1931 om4
48
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
041 A 2054041 A 1902041 A 1397041 A 1922
041 A 2064 om3041 A 1912 om3041 A 1497 om3041 A 1932 om3
041 A 2064 om4041 A 1912 om4041 A 1497 om4041 A 1932 om4
72
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
041 A 2055041 A 1903041 A 1398041 A 1923
041 A 2065 om3041 A 1913 om3041 A 1498 om3041 A 1933 om3
041 A 2065 om4041 A 1913 om4041 A 1498 om4041 A 1933 om4
96
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
041 A 2056041 A 1904041 A 1783041 A 1924
041 A 2066 om3041 A 1914 om3041 A 1784 om3041 A 1934 om3
041 A 2066 om4041 A 1914 om4041 A 1784 om4041 A 1934 om4
144
lc-compact » sc-duplexlc-compact » lc-compactmU-duplex-horizontal » sc-duplexmU-duplex-horizontal » lc-compact
041 A 2057041 A 1905041 A 1399041 A 1925
041 A 2067 om3041 A 1915 om3041 A 1499 om3041 A 1935 om3
041 A 2067 om4041 A 1915 om4041 A 1499 om4041 A 1935 om4
other fiber types, connector types and numbers of fibers on request.
AssemblIes Preconnect® fIber
comPArIson mAtrIX cAble ProPertIes U-dQ(Zn)bh vs. I-b(Zn)bh
properties u-dQ(zn)Bh (universal) i-B(zn)Bh (eFFiciencY)
handlinghigh bending flexibilitysmall bending radiilow weight
+++
+ ++ ++ +
mechanical robustnesshigh tensile strengthhigh crush resistancehigh torsion strength
+ ++ ++ +
+++
suitability for top of rack cabling
low weightlow fire load
++
+ ++ +
+ good ++ excellent
102 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• Installation in data centers for short links with a few fibers
ProPertIes• both sides factory assembled with fo connectors• tool-less mounting in 19“ panels and universal holders
through Preconnect® square interface at both sides• standard light propagation simplex connectors: 1 to n,
duplex connectors ”channelwise crossed“ (pairwise flipped)
• leg length to be selected from 20 cm to max. 5 m• cable length up to 1,000 m
length defInItIon• order length: length between the connectors at the
longest legs at both sides (not between the cable dividers)• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
cAble tyPes• robust frnc-lsZh breakout cables up to 24 fibers• cable data sheets on request
fIber tyPes• with all standard fiber types available• fiber data sheets on request
connectors• with all standard single-fiber connectors and their
duplex variants available• with mtP® connectors
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels behind both cable dividers• connector legs packed in dust-proof foil-tubes, also
available in robust installation tubes on request• dependent on the length as cable ring, on cardboard or
wooden drum
preconnect® FiBer Breakout
AssemblIes Preconnect® fIber
mtP® is a registered trademark of Us-conec ltd.
Installation tube Indoor,IP50 dust-proof
103ROSENBERGER OSI PRODUCT CATALOG
Pre
con
nec
t® f
Iber
2
AssemblIes Preconnect® fIber
PArtnUmbers
channels/FiBers connectors os2
9/125oM3
50/125oM4
50/125
6 ch / 12 Flc-compact » lc-compactmU-duplex-horizontal » mU-duplex-horizontalmtP® 12-female » mtP® 12-female
0 3 6 A 0 5 1 20 3 6 A 0 5 1 30 3 7 A 0 1 0 2
0 3 6 A 0 5 0 3 om30 3 6 A 0 5 0 2 om30 3 7 A 0 1 0 0 om3
0 3 6 A 0 5 0 3 om40 3 6 A 0 5 0 2 om40 3 7 A 0 1 0 0 om4
12 ch / 24 Flc-compact » lc-compactmU-duplex-horizontal » mU-duplex-horizontalmtP® 12-female » mtP® 12-female
0 3 6 A 0 5 1 40 3 6 A 0 5 1 50 3 7 A 0 1 0 3
0 3 6 A 0 5 0 4 om30 3 6 A 0 5 0 6 om30 3 7 A 0 1 0 1 om3
0 3 6 A 0 5 0 4 om40 3 6 A 0 5 0 6 om40 3 7 A 0 1 0 1 om4
other fiber types, connector types and numbers of fibers on request. with single-fiber connectors only up to 24 fibers available. with mtP® connectors at both sides up to 144 fibers available. hybrid cables with mtP® to single-fiber connectors not possible. mtP® is a registered trademark of Us-conec ltd.
on request also available in the known design without Preconnect® square interface or as factory assembled mini breakout cable.
breakout
mini breakout
mini breakoutcable type I-V(Zn)h
cable type I-V(Zn)hh
104 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIon of tyPe 1• for cabling of large servers and switches in data centers
APPlIcAtIon of tyPe 2• In case longer harness lengths are required, e.g. for cabling
of rack rows in data centers
ProPertIes of tyPe 1• this mtP® divider cable (also named harness) separates the
channels of mtP® trunk cables in duplex connectors like e.g. lc-compact.
• 15 cm mtP® leg, duplex connector leg lengths to be selected
• shortest total length: 60 cm• longest total length: 4 m
ProPertIes of tyPe 2• this mtP® divider cable (also named harness) separates the
channels of mtP® trunk cables in duplex connectors like e.g. lc-compact.
• robust double jacket mtP® leg length to be selected, fixed duplex connector legs
• shortest total length: 60 cm• longest total length: no limit
preconnect® FiBer Mtp® divider caBles (harnesses)
type 2type 1
cAble tyPes • different frnc-lsZh cables and connector legs• cable data sheets on request
fIber tyPes• Acc. to partnumber table• other fiber types and fiber data sheets on request
connectors• mtP® 12 fiber with guide-pins (male) and all standard
duplex connectors
lIght ProPAgAtIon• ”Uncrossed“ (straight) to maintain the ”channelwise cross“
(pairwise flip) of our mtP® trunk cables
delIVery form• factory measured Insertion loss (Il), including measure-
ment report acc. to Iec 61300-3-4 methode ”substitution“• Product Id label• each packed in a foil bag
AssemblIes Preconnect® fIber
mtP® is a registered trademark of Us-conec ltd.
105ROSENBERGER OSI PRODUCT CATALOG
Pre
con
nec
t® f
Iber
2
Mtp® divider caBletype 1
Mtp® divider caBletype 2
PArtnUmbers
connectors
FiBertYpe
os2 9/125
oM3 50/125
oM4 50/125
mtP® 12-male » 6 lc-compact15 cm mtP® leg
0 7 5 A 0 5 0 0 0 7 5 A 0 5 0 1 om3 0 7 5 A 0 5 0 1 om4
with other duplex connectors on request. mtP® is a registered trademark of Us-conec ltd.
PArtnUmbers
connectors
FiBertYpe
os2 9/125
oM3 50/125
oM4 50/125
mtP® 12-male » 6 lc-compact0.5 m duplex connector leg
0 7 6 A 0 1 0 0 0 7 6 A 0 1 0 1 om3 0 7 6 A 0 1 0 1 om4
mtP® 12-male » 6 lc-compact1.5 m duplex connector leg
0 7 6 A 0 1 0 3 0 7 6 A 0 1 0 4 om3 0 7 6 A 0 1 0 4 om4
with other duplex connectors on request. other duplex connector legs application specific fitting for the to be attached equipment on request.mtP® is a registered trademark of Us-conec ltd.
AssemblIes Preconnect® fIber
our migration harnesses for 40 and 100 gigabit ethernet om3 and om4 (Parallel optics) are to be found on page 107.
106 ROSENBERGER OSI PRODUCT CATALOG
Preconnect® fIber for specific Applicationsparallel optics in the data center
APPlIcAtIons• to attach equipment with multimode mtP® transceivers
for the transmission protocols Infiniband™ and 40/100 gigabit ethernet
ProPertIes• factory assembled connectors on both sides• Appropriate for 4 x, 8 x and 12 x Infiniband™ and 40/100
gigabit ethernet
cAble tyPes• different frnc-lsZh cables• cable data sheets on request
fIber tyPes• multimode om3 and om4• fiber data sheets on request
connectors• with mtP®, lc and sc connectors
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels on both sides• connector legs packed in dust-proof foil-tubes, also
available in robust indoor installation tubes on request• dependent on the length as cable ring, on cardboard or
wooden drum
AssemblIes Preconnect® fIber
mtP® is a registered trademark of Us-conec ltd.
Installation tube Indoor,IP50 dust-proof
107ROSENBERGER OSI PRODUCT CATALOG
Pre
con
nec
t® f
Iber
2
AssemblIes Preconnect® fIber
PArtnUmbers
nuMBer oF FiBers / connectors
oM3 50/125
oM450/125
12122488
1212
direct Attach short link cable mtP® 12-female » mtP® 12-femaledirect Attach long link cable mtP® 12-female » mtP® 12-femaledirect Attach long link cable mtP® 12-female » mtP® 12-femalemigration harness mtP® 12-female » 8 sc-simplex migration harness mtP® 12-female » 8 lc-simplex migration harness mtP® 12-female » 12 sc-simplex migration harness mtP® 12-female » 12 lc-simplex
0 8 0 A 0 5 8 0 om30 8 0 A 0 7 4 3 om30 8 0 A 0 7 4 2 om30 7 6 A 0 0 5 0 om30 7 6 A 0 0 5 1 om30 7 6 A 0 0 6 0 om30 7 6 A 0 0 6 1 om3
0 8 0 A 0 5 8 0 om40 8 0 A 0 7 4 3 om40 8 0 A 0 7 4 2 om40 7 6 A 0 0 5 0 om40 7 6 A 0 0 5 1 om40 7 6 A 0 0 6 0 om40 7 6 A 0 0 6 1 om4
other fiber types, connector types and numbers of fibers on request. mtP® is a registered trademark of Us-conec ltd.
PArtnUmbers
nuMBer oF FiBers / connectors
oM3 50/125
oM450/125
121288
direct Attach short link cable mtP® 12-female » mtP® 12-femaledirect Attach long link cable mtP® 12-female » mtP® 12-femalemigration harness mtP® 12-female » 8 sc-simplexmigration harness mtP® 12-female » 8 lc-simplex
0 8 0 A 0 5 8 0 om30 8 0 A 0 7 4 3 om30 7 6 A 0 0 5 0 om30 7 6 A 0 0 5 1 om3
0 8 0 A 0 5 8 0 om40 8 0 A 0 7 4 3 om40 7 6 A 0 0 5 0 om40 7 6 A 0 0 5 1 om4
other fiber types, connector types and numbers of fibers on request. mtP® is a registered trademark of Us-conec ltd.
PArtnUmbers
nuMBer oF FiBers / connectors
oM350/125
oM450/125
24242020
direct Attach short link cable mtP® 24-female » mtP® 24-female direct Attach long link cable mtP® 24-female » mtP® 24-femalemigration harness mtP® 24-female » 20 sc-simplexmigration harness mtP® 24-female » 20 lc-simplex
0 8 0 A 0 8 4 5 om30 8 0 A 0 8 4 6 om30 8 0 A 0 8 4 7 om30 8 0 A 0 8 4 8 om3
0 8 0 A 0 8 4 5 om40 8 0 A 0 8 4 6 om40 8 0 A 0 8 4 7 om40 8 0 A 0 8 4 8 om4
other fiber types, connector types and numbers of fibers on request. mtP® is a registered trademark of Us-conec ltd.
parallel optics inFiniBand™
parallel optics 40 gigaBit ethernet
parallel optics 100 gigaBit ethernet
108 ROSENBERGER OSI PRODUCT CATALOG
Preconnect® fIber for specific Applicationspreconnect® FiBer trunk MoBile
AssemblIes Preconnect® fIber
APPlIcAtIons• for emergency replacement of broken fo links indoor
and outdoor• broadcast: for mobile use in event and presentation
technics e.g. tV transmission• Industry: for mobile use e.g. mining
ProPertIes• mobile trunk with high quality robust drum• enhanced protection through captive installation tubes for
all standard connectors at both sides• halogen-free and flexible at low temperature• notch proof and abrasion resistant• oil and chemical resistant• factory assembled connectors on both sides• standard light propagation ”channelwise crossed“
(pairwise flipped)
length defInItIon• order length: length between the connectors at the
longest legs at both sides (not between the cable dividers)• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
• leg lengths on both sides stepped acc. to table page 95, suited for application in distribution panels
cAble tyPes• with robust and flexible loose tube cables up to 24 fibers
available• with breakout cable for outdoor applications available• with hybrid cable (fo/copper) available• cable data sheets on request
fIber tyPes• with all standard fiber types available• fiber data sheets on request
connectors• with all standard connectors available, see pages 62 – 73• with all heavy duty connectors (IP67) available,
see pages 82 – 85
oPtIonAl• cable with increased tensile strength and crush resistance• cable with special armoring• transport cart or trolley
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels behind both cable dividers• dependent on the length on cardboard, wooden or mobile
drum• Partnumbers on request
1
4
2
3
model 1Variant with heavy duty connector
model 2
109ROSENBERGER OSI PRODUCT CATALOG
Pre
con
nec
t® f
Iber
2
AssemblIes Preconnect® fIber
model 1: InstAllAtIon tUbe on both sIdes• both sides of the cable are equipped with our robust
Preconnect® cable divider with stepped fanout legs, being assembled with fiber optic connectors (1).
• the cable dividers and fanout legs including the fiber optic connectors are protected by captive installation tubes. water proofing, tensile strength and crush resistance are guaranteed up to IP67 specifications. Installation tubes provide protection during storage, transport, installation and operation.
• the free cable length up to the connectors at the drum side (2) is approx. 3 m by default.
• further lengths on request.
• the connectors on the inner end are attached to the couplers on the drum winding side inside the shock-proof and IP50 dust-proof steel outlet socket with its protective cover (3).
• this protects the fiber optic interface against damage during storage, transportation, installation and operation.
• on the other end – the one which can be unrolled – there is our robust Preconnect® cable divider with stepped connectorised fanout legs (4).
• the cable divider and fanout legs including the fiber optic connectors are protected by the captive installation tube. water proofing, tensile strength and crush resistance are guaranteed up to IP67 standards. the installation tube ensures protection during storage, transportation, instal-lation and operation.
chAInIng KIt for model 2 the chaining kit is an option for Preconnect® mobile type 2 models. they can be chained or connected to achieve longer distances.• the kit consists of a small cage and a robust protection
cover (6). • the cage (5) has to be mounted next to the outlet socket
(7) of the extension drum• It accepts the cable divider (8) and the connector legs of
the Preconnect® mobile drum, which requires chaining and connecting.
• the protection cover (6) has to be placed over the extension drum for protection against moisture and dirt.
model 2: InstAllAtIon tUbe And oUtlet socKet
trolley
transport cart
captive installation tubes on both sides, IP67 water-proof
chaining kit8
6
5
7
110 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• ready-for-connection multi-channel cable for harsh outdoor
environment• to integrate security and mobile telecommunications (fttA)
equipment in unprotected outdoor environment into struc-tured cabling
ProPertIes• see technology description pages 48 – 50• Appropriate for use in temperature range -40 °c to +85 °c• high UV resistance• high crush resistance• both sides factory assembled with fo connectors• standard light propagation ”channelwise crossed“
(pairwise flipped)• cable length up to 2,000 m, longer on request
length defInItIon• order length: length between the connectors at the lon-
gest legs at both sides (not between the cable dividers)• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
• leg lengths on both sides stepped acc. to table page 95, suited for application in distribution panels
Preconnect® fIber for specific Applicationspreconnect® FiBer trunk outdoor
cAble tyPes • central loose tube cables up to 36 fibers available• Iec and Ul specified cable available• cable data sheets on request
fIber tyPes• singlemode (9/125 µm) and multimode (50/125 µm)• fiber data sheets on request
connectors• lc-compact• other connector types on request
oPtIonAl• special rodent protection armoring• hybrid connector assembling• otdr measured with measurement report• return loss (rl) measurement
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels behind both cable dividers• dependent on the length as cable ring, on cardboard
or wooden drum
AssemblIes Preconnect® fIber
Installation tube outdoor,IP67 water-proof
111ROSENBERGER OSI PRODUCT CATALOG
2
AssemblIes Preconnect® fIber
Pre
con
nec
t® f
Iber
technIcAl dAtA
nuMBer oF FiBers 12 24 36
leg length stepped [cm] side A side b
55 - 80135 - 220
55 - 8055 - 80
60 - 85195 - 220
diaMeter installation tuBe [cm] approx. 34 34 38
Max. tensile strength installation tuBe [n] 600 600 600
crush resistance installation tuBe [n/cm] 30 30 30
PArtnUmbers
channels/FiBers connectors g657 a2 MM oM2
6 ch / 12 F lc-compact » lc-compact 0 4 8 A 0 1 5 0 0 4 8 A 0 1 5 1
12 ch / 24 F lc-compact » lc-compact 0 4 8 A 0 1 5 2 0 4 8 A 0 1 5 3
18 ch / 36 F lc-compact » lc-compact 0 4 8 A 0 1 5 4 0 4 8 A 0 1 5 5
sm os2, mm om3 and om4 and other connector types and leg lengths on request.
cable type A-dQ(Zn)b2y 24
operating temperature range: -40 °c to +85 °c, for less robust outdoor applications see Preconnect® fIber trunk page 97
112 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• ready-for-connection single-channel cable for harsh outdoor
environment• to integrate security and mobile telecommunications (fttA)
equipment in unprotected outdoor environment into struc-tured cabling
ProPertIes• Appropriate for use in temperature range -40 °c to +85 °c• high UV resistance• high crush resistance• both sides factory assembled with fo connectors• single data channel in one cable• standard light propagation ”channelwise crossed“
(pairwise flipped)• leg lengths applicationspecific selectable• cable length to be selected
length defInItIon• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
preconnect® FiBer Breakout outdoor(single-channel)
AssemblIes Preconnect® fIber
cAble tyPes• mini breakout and breakout• Iec and Ul specified cable available• cable data sheets on request
fIber tyPes• singlemode (9/125 µm) and multimode (50/125 µm)• fiber data sheets on request
connectors• lc-duplex, lc-compact, rosenberger duplex connector
(rdc)• other connector types on request
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels on both sides• connector protection on request• dependent on the length as cable ring in cardboard box
or on cardboard drum
Installation tube outdoor,IP67 water-proof
conventional outdoor breakout cable
113ROSENBERGER OSI PRODUCT CATALOG
2
AssemblIes Preconnect® fIber
Pre
con
nec
t® f
Iber
PArtnUmbersbreAKoUt cAble wIth hot-melt technology
channels/FiBers
Ø connectoros 2
9/125oM 2
50/125
1 ch / 2 F 5 mm lc-compact » lc-compact 0 8 7 A 6 7 0 2 0 8 7 A 6 7 0 3
1 ch / 2 F 7 mm lc-compact » lc-compact 0 8 7 A 6 7 0 8 0 8 7 A 6 7 0 9
om3 and om4 on request
PArtnUmbers conVentIonAl breAKoUt cAble
channels/FiBers
Ø connectoros 2
9/125oM 2
50/125
1 ch / 2 F 5 mmlc-duplex » lc-duplex
rdc » lc-duplex0 8 7 A 6 7 0 00 8 7 A 6 7 0 4
0 8 7 A 6 7 0 10 8 7 A 6 7 0 5
1 ch / 2 F 7 mmlc-duplex » lc-duplex
rdc » lc-duplex0 8 7 A 6 7 0 60 8 7 A 6 7 1 0
0 8 7 A 6 7 0 70 8 7 A 6 7 1 1
om3 and om4 on request
outdoor breakout cable with hot-melt technology
114 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• ready-for-connection multi-channel cable for harsh outdoor
environment• to integrate security and mobile telecommunications (fttA)
equipment in unprotected outdoor environment into struc-tured cabling
ProPertIes• Appropriate for use in temperature range -40 °c to +85 °c• high UV resistance• high crush resistance• both sides factory assembled with fo connectors• 3 or 6 data channels in one cable• singular coded duplex connectors• standard light propagation ”channelwise crossed“
(pairwise flipped)• leg lengths applicationspecific selectable• cable length to be selected
length defInItIon• order length: length between the connectors at the lon-
gest legs at both sides (not between the cable dividers)• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
preconnect® FiBer Breakout outdoor(multi-channel)
cAble tyPes • mini breakout (900 µm)• Iec and Ul specified cable available• cable data sheets on request
fIber tyPes• singlemode (9/125 µm) and multimode (50/125 µm)• fiber data sheets on request
connectors• lc-duplex• other connector types on request
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels behind both cable dividers• connector legs packed in dust-proof foil-tubes, on request
in robust installation tubes available too• dependent on the length as cable ring in cardboard box or
on cardboard drum
AssemblIes Preconnect® fIber
Installation tube outdoor,IP67 water-proof
6 channel outdoor mini breakout cable
115ROSENBERGER OSI PRODUCT CATALOG
2
AssemblIes Preconnect® fIber
Pre
con
nec
t® f
Iber
PArtnUmbers
channels/FiBers connector
os 29/125
oM 250/125
3 ch / 6 F lc-duplex » lc-duplex 0 4 8 A 0 1 5 6 0 4 8 A 0 1 5 7
6 ch / 12 F lc-duplex » lc-duplex 0 4 8 A 0 1 5 8 0 4 8 A 0 1 5 9
sm os2, mm om3 and om4 on request.
technIcAl dAtA
nuMBer oF FiBers 6 12
leg length stepped [cm] 50 - 60 50 - 75
diaMeter installation tuBe [mm] approx. 23 23
Max. tensile strength installation tuBe [n] 600 600
crush resistance installation tuBe [n/cm] 350 350
3 channel outdoor mini breakout cable
116 ROSENBERGER OSI PRODUCT CATALOG
preconnect® FiBer caBleBundle outdoor(3-4 channel)
AssemblIes Preconnect® fIber
PArtnUmbers
channels/FiBers connector g657 a2 MM oM2
4 ch / 8 Frdc » lc-compact
lc-compact » lc-compact0 4 8 A 0 1 2 20 4 8 A 0 1 1 9
0 4 8 A 0 1 2 10 4 8 A 0 1 2 0
sm os2, mm om3 and om4 on request.
APPlIcAtIons• ready-for-connection 4-channel cable for harsh outdoor
environment• to integrate security and mobile telecommunications (fttA)
equipment in unprotected outdoor environment into struc-tured cabling
ProPertIes• Assembled cable bundle with individual selectable leg
lengths (4 bundles)
length defInItIon• order length: length between the connectors at the lon-
gest legs at both sides (not between the cable dividers)• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
• leg lengths on both sides stepped acc. to table page 95, suited for application in distribution panels
cAble tyPes• central loose tube cables up to 36 fibers available• Iec and Ul specified cable available• cable data sheets on request
fIber tyPes• singlemode (9/125 µm) and multimode (50/125 µm)• fiber data sheets on request
connectors• lc-duplex, lc-compact, rosenberger duplex
connector (rdc)• other connector types on request
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels on both sides• connector protection on request• dependent on the length as cable ring in cardboard box or
on cardboard drum
117ROSENBERGER OSI PRODUCT CATALOG
2
preconnect® toWer Multi-FiBer sYsteM (tMFs)(multi-channel)
AssemblIes Preconnect® fIber
Pre
con
nec
t® f
Iber
PArtnUmber
channels/FiBers connector g657 a2 MM oM2
12 ch / 24 F rdc » lc-compact 0 4 8 A 0 1 6 0 0 4 8 A 0 1 6 1
sm os2, mm om3 and om4 on request. 12 and 36 fibers on request.
APPlIcAtIons• to integrate security and mobile telecommunications (fttA)
equipment in unprotected outdoor environment into struc-tured cabling
ProPertIes• Assembled rosenberger duplex connector (rdc)
distribution unit with fix attached multifiber cable• distribution unit with up to 18 rdc receptacles• IP67 water-proof
length defInItIon• order length: length between the connectors at the lon-
gest legs at both sides (not between the cable dividers)• length tolerances:
up to 10 m = +/- 50 cm 11 m to 30 m = +/- 100 cm 31 m to 100 m = +/- 150 cm longer than 100 m = +/- 2 %
cAble tyPes • central loose tube cables up to 36 fibers available• Iec and Ul specified cable available• cable data sheets on request
fIber tyPes• singlemode (9/125 µm) and multimode (50/125 µm)• fiber data sheets on request
connectors• side A: lc-compact• side b (distribution unit): rosenberger duplex connector
(rdc) receptacle
delIVery form• factory measured Insertion loss (Il), including measure-
ment report• Product Id labels on both sides• connector protection on request• dependent on the length as cable ring in cardboard box or
on cardboard drum
118 ROSENBERGER OSI PRODUCT CATALOG
PArtnUmbermtP® 19“ UnIVersAl-coUPler brAcKets
for universal mtP® cabling in 19“ cabinets and racks. Particularly suited for cabling of large switches with high port density.12 x mtP® singlemode 9 / 125 µm12 x mtP® multimode 50 / 125 µm om312 x mtP® multimode 50 / 125 µm om419“ 1 hU support for bracketsrAl 9005 (black)
0 9 9 A 0 3 6 60 9 9 A 0 3 6 5 om30 9 9 A 0 3 6 5 om40 9 9 A 0 0 8 6
mtP® is a registered trademark of Us-conec ltd.
preconnect® FiBer accessories
AssemblIes Preconnect® fIber
PArtnUmber19“ 1 hU UnIVersAl-trUnK cAble dIVIder holder
for universal installation of trunk cable dividers in 19“ cabinets/racks.rAl 9005 (black) 0 9 9 A 0 0 8 5
PArtnUmber19“ 1 hU UnIVersAl-trUnK cAble dIVIder holder
for universal installation of a trunk cable divider in a 19“ cabinet/rack or at any place where this part can be installed individually. rAl 9005 (black)
0 9 9 A 0 0 6 5
119ROSENBERGER OSI PRODUCT CATALOG
6 x mU-duplex•Width:80mm•Height:1HU=44mm
6 x lc-duplex 3 x mtP®
PArtnUmbers
nuMBer oF couplers / tYpe oF coupler
sM MM50 µm oM3
MM50 µm oM4
2 mU-duplex 0 9 9 A 0 3 4 8 0 9 9 A 0 3 5 0 om3 0 9 9 A 0 3 5 0 om4
4 mU-duplex 0 9 9 A 0 3 5 1 0 9 9 A 0 3 5 3 om3 0 9 9 A 0 3 5 3 om4
6 mU-duplex 0 9 9 A 0 3 5 4 0 9 9 A 0 3 5 6 om3 0 9 9 A 0 3 5 6 om4
2 lc-duplex 0 9 9 A 0 3 4 5 0 9 9 A 0 3 4 7 om3 0 9 9 A 0 3 4 7 om4
4 lc-duplex 0 9 9 A 0 3 4 2 0 9 9 A 0 3 4 4 om3 0 9 9 A 0 3 4 4 om4
6 lc-duplex 0 9 9 A 0 3 4 0 0 9 9 A 0 3 0 5 om3 0 9 9 A 0 3 0 5 om3
1 mtP® 0 9 9 A 0 3 6 2 0 9 9 A 0 3 6 4 om3 0 9 9 A 0 3 6 4 om4
2 mtP® 0 9 9 A 0 3 5 9 0 9 9 A 0 3 6 1 om3 0 9 9 A 0 3 6 1 om4
3 mtP® 0 9 9 A 0 3 5 7 0 9 9 A 0 3 0 6 om3 0 9 9 A 0 3 0 6 om4
other coupler types and numbers on request. mtP® is a registered trademark of Us-conec ltd.
APPlIcAtIons• suited for installation at 19“ bars and for
universal mounting
ProPertIes And delIVery form• material: steel, powder coated• colour: rAl 9005 (black)• long holes for universal installation• couplers mounted• without screws and cage nuts
Mini-universal coupler Brackets
AssemblIes Preconnect® fIber
Pre
con
nec
t® f
Iber
2
121ROSENBERGER OSI PRODUCT CATALOG
2AssemblIes: Preconnect® coPPer
flexible of its kind – and thus perfectly suitable for top of rack application in data centers.the cable is very installation friendly due to itsvery small bending radius and diameter. And: it contributes excellently to the server room cooling, because it does not impair the air flow as it is the case with conventional copper cables.
our Preconnect® coPPer trunks were develo-ped on the background of our experience and know-how in fiber optic technology, which we transferred to the structured copper cabling. In that way we engineered for example the Preconnect® coPPer trunk tor, which despite its six channels, is one of the thinnest and most
122 ROSENBERGER OSI PRODUCT CATALOG
preconnect® copper trunk
APPlIcAtIons• 6 channel copper data cable on both sides assembled with
rJ45 jack modules ready-for-connection particularly in data center installations.
ProPertIes• stranded 6 channel s-stP cat. 7 Awg 23 frnc-lsZh
cable with cat. 6A rJ45 jack modules• ghmt certified• 4 connector channel 10 gbe Klasse eA
• leg length 30 cm• stepped leg lengths also available
cAble tyPes• 6 single stranded cat.7 s-stP copper data cables taped with
a self-extinguishing, halogen-free and transparent foil tape• solid wire Awg 23 with screened pairs and overall copper
braid• cable diameter 22.3 mm
JAcK modUles• rJ45, screened cat. 6A • suited for standard keystone holes
delIVery form• factory measured with measurement report• Product Id labels on both sides• Jack modules packed in tensile strength and dust-proof
pulling socks• on request packed in tensile strength, crush resistant and
dust-proof installation tubes available• dependent on the length as cable ring, on cardboard or
wooden drum
Associated copper panels see page 170.
PArtnUmbers
preconnect® copper trunk 0 4 7 A 0 1 0 1
AssemblIes Preconnect® coPPer
required diameter of cable feedthrough minimum 90 mm
PArtnUmbers PAtchcords coPPer screened cat. 6 rJ45 connectors with molded boots at cat. 7 s/ftP frnc-lsZh flex cable grey
length partnuMBers
1 m2 m3 m5 m
8 0 0 A 0 0 0 18 0 0 A 0 0 0 38 0 0 A 0 0 0 58 0 0 A 0 0 0 7
other lengths, colours and types on request.
123ROSENBERGER OSI PRODUCT CATALOG
Pre
con
nec
t® c
oPP
er
2
preconnect® copper trunk tor
APPlIcAtIons• 6 channel copper data cable assembled on both sides with
rJ45 jack modules ready-for-connection, optimized for top of rack (tor) installations, for use in all other application fields, in particular in data centers.
ProPertIes• 6 channel s-stP cat. 7 Awg 23 or Awg 26 frnc-lsZh
cable with cat. 6A rJ45 jack modules• high flexibility allows minimum bending radius:• Awg 23 ≥ 100 mm • Awg 26 ≥ 55 mm
• ghmt certified: 10 gbe class eA permanent link, but only 80 m with Awg 23 and 60 m with Awg 26
• leg length 20 cm, adapted to the associated panel on page 171
• with cable gland for mounting at the panel
PArtnUmbers
preconnect® copper trunk tor Awg 23 0 4 7 A 0 2 0 0
preconnect® copper trunk tor Awg 26 0 4 7 A 0 3 0 0
AssemblIes Preconnect® coPPer
required diameter of cable feedthrough minimum 90 mm
cAble tyPes• Innovative, thin and flexible cat. 7 copper data cable with
diameter of 18 mm using Awg 23 and 13.2 mm using Awg 26• with 24 foil-screened Awg 23 or Awg 26 solid wire pairs
(Pimf) below an overall copper braid with a frnc-lsZh cable jacket
JAcK modUles• rJ45 keystone, screened cat. 6A
delIVery form• factory measured, with measurement report• Product Id labels on both sides• Jack modules packed in tensile strength and dust-proof
pulling socks• dependent on the length as cable ring, on cardboard or
wooden drum
PArtnUmbers PAtchcords coPPer tor screened cat. 6 rJ45 connectors at cat. 7 s/ftP frnc-lsZh flex cable grey
length partnuMBers
1 m2 m3 m5 m
8 0 0 A 0 1 9 58 0 0 A 0 1 9 68 0 0 A 0 1 9 48 0 0 A 0 1 9 7
other lengths, colours and types on request.
124 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• 6 channel copper data cable assembled on both sides with
rJ45 connectors or jack modules ready-for-connection particular in data center installations.
ProPertIes• Appropriate for 4 connector channel 10 gbe class eA,
but only 60 m• leg length 30 cm for cables with jack modules, stepped leg
lengths also available• leg length for cables with connectors to be selected
cAble tyPes• 6 single stranded cat.7 s / ftP copper data cables taped
with a self-extinguishing, halogen-free and transparent foil tape
• flex braid wire Awg 26 with screened pairs and overall copper braid
• cable diameter 17.6 mm
preconnect® copper trunk Multi JuMper
connectors• rJ45, screened cat. 6
JAcK modUles• rJ45, screened cat. 6A • suited for standard keystone holes
delIVery form• factory measured, with measurement report• Product Id labels on both sides• connectors and jack modules packed in tensile strength
and dust-proof pulling socks• on request packed in tensile strength, crush resistant and
dust-proof installation tubes available• dependent on the length as cable ring, on cardboard or
wooden drum
Associated copper panels see page 170.
AssemblIes Preconnect® coPPer
125ROSENBERGER OSI PRODUCT CATALOG
Pre
con
nec
t® c
oPP
er
2
rJ45 connector rJ45 jack modules
PArtnUmbers PAtchcords coPPer screened cat. 6 rJ45 connectors with molded boots at cat. 7 s/ftP frnc-lsZh flex cable grey
length partnuMBers
1 m2 m3 m5 m
8 0 0 A 0 0 0 18 0 0 A 0 0 0 38 0 0 A 0 0 0 58 0 0 A 0 0 0 7
other lengths, colours and types on request.
PArtnUmbers
description side a side B partnuMBers
Preconnect® coPPer trunk multi Jumperjack module » jack module
cat. 6A
rJ45 jack modulecat. 6A
rJ45 jack module0 4 7 A 0 1 3 0
Preconnect® coPPer trunk multi Jumperconnector » jack module
cat. 6rJ45 connector
cat. 6A
rJ45 jack module0 4 7 A 0 1 3 1
Preconnect® coPPer trunk multi Jumperconnector » connector
cat. 6rJ45 connector
cat. 6rJ45 connector
0 4 7 A 0 1 3 2
AssemblIes Preconnect® coPPer
you can order the Preconnect® coPPer trunk multi Jumper either with factory assembled rJ45 connectors or jack modules.
127ROSENBERGER OSI PRODUCT CATALOG
2AssemblIes: PAtchcords And PIgtAIls
rosenberger osI manufactures this group of products for all application fields – with opti-mized kink and crush resistance for different environmental conditions. In particular pigtails need to be installed with much effort. the high quality cables from rosenberger osI ensure a long and trouble-free life cycle with a minimum of maintenance effort being required.
regardless of whether it‘s fiber or copper, due to the importance of their function, patchcords are the most heavily stressed components in struc-tured cabling. we at rosenberger osI know: each network is just as good as its weakest component. hence we do not make compro-mises for patchcords and pigtails too. finally, they have a crucial influence on transmission performance and thus on the quality of cabling infrastructures.
128 ROSENBERGER OSI PRODUCT CATALOG
patchcords FiBer
APPlIcAtIons• Patchcords appropriate for use in data centers and
office buildings• Patchcords for other applications on request
ProPertIes• optimized kink and crush resistance with regards to appli-
cation requirements• operating temperature range -10 °c to +60 °c, patchcords
for other operating temperature ranges on request• standard light propagation:• full-duplex-cables: duplex connectors at both sides acc.
to Iso/Iec 11801 and en 50173 = “crossed” (flipped)• half-duplex-cables: duplex-connector at one side an
2 x simplex at the other side = “uncrossed” (unflipped)• duplex-cables: with simplex connectors at both sides
= “uncrossed” (unflipped)
length tolerAnces:• Up to 1 m = +/- 50 mm
2 m to 3 m = +/- 100 mm 4 m to 25 m = +/- 200 mm longer than 25 m = +/- 1 %
cAble tyPes• different frnc-lsZh cables• cable data sheets on request
fIber tyPes• with all standard fiber types available• fiber data sheets on request
connectors• with all standard connectors available
delIVery form• factory Insertion loss (Il) measured acc. to Iec 61300-3-4
methode ”c“ or ”substitution“, measurement report on request
• serial number label at both cable ends for use in network documentation
• Product Id label on the package• each packed in a foil bag, cables longer than 100 m on
cardboard drum
AssemblIes PAtchcords
129ROSENBERGER OSI PRODUCT CATALOG
PAtc
hco
rds
2
siMplex patchcordcable type I-V(Zn)h 1 x 2.1 mm frnc-lsZh
siMplex patchcordcable type I-V(Zn)h 1 x 2.8 mm frnc-lsZh
PArtnUmbers
connector length os2 9/125
mU » mUmU » lclc » lcmU APc » mU APc mU APc » lc APc lc APc » lc APc
VariableVariableVariableVariableVariableVariable
0 8 8 A 0 7 2 70 8 7 A 1 0 0 70 8 7 A 1 0 1 00 8 8 A 0 7 9 40 8 8 A 0 7 2 80 8 7 A 0 7 6 2
operating temperature range -10 °c to +60 °c, patchcords for other operating temperature ranges on request. other connector combinations, cable and fiber data sheets on request.
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
sc » sc sc » e-2000tm 1
e-2000tm 1 » e-2000tm 1
fc Pc » fc Pc sc APc » sc APc sc APc » e-2000tm hrl1 e-2000tm hrl1 » e-2000tm hrl1
fc APc » fc APc
VariableVariableVariableVariableVariableVariableVariableVariable
0 6 2 A 0 1 3 00 6 2 A 0 8 0 00 6 9 A 3 0 8 50 6 8 A 0 1 3 00 6 2 A 0 1 3 50 6 2 A 0 8 4 10 6 9 A 2 1 3 50 6 8 A 0 1 3 5
0 6 2 A 0 1 1 0 om30 6 2 A 0 8 0 1 om30 6 9 A 2 1 1 0 om30 6 8 A 0 1 1 0 om3
––––
0 6 2 A 0 1 1 0 om40 6 2 A 0 8 0 1 om40 6 9 A 2 1 1 0 om40 6 8 A 0 1 1 0 om4
––––
operating temperature range -10 °c to +60 °c, patchcords for other operating temperature ranges on request. other connector combinations, cable and fiber data sheets on request. 1 = type r+m with zirconia ceramic ferrule.
AssemblIes PAtchcords
130 ROSENBERGER OSI PRODUCT CATALOG
duplex patchcordcable type Zipcord I-V(Zn)h 2 x 2.1 mm frnc-lsZh
duplex patchcordcable type Zipcord I-V(Zn)h 2 x 2.8 mm frnc-lsZh
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
mU-duplex-horizontal » mU-duplex-horizontalmU-duplex-horizontal » lc-duplexmU-duplex » sc-duplexlc-duplex » lc-duplexlc-duplex » sc-duplex
Variable Variable VariableVariableVariable
0 8 8 A 0 2 0 80 8 7 A 4 0 0 40 8 8 A 2 5 4 10 8 7 A 5 0 0 50 8 7 A 5 0 3 5
0 8 8 A 0 9 0 0 om30 8 7 A 4 0 1 3 om30 8 8 A 2 5 4 0 om30 8 7 A 5 0 1 5 om30 8 7 A 5 0 4 5 om3
0 8 8 A 0 9 0 0 om40 8 7 A 4 0 1 3 om40 8 8 A 2 5 4 0 om40 8 7 A 5 0 1 5 om40 8 7 A 5 0 4 5 om4
operating temperature range -10 °c to +60 °c, patchcords for other operating temperature ranges on request. other connector combinations, cable and fiber data sheets on request.
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
sc-duplex » sc-duplex sc-duplex » stsc-duplex » lc-duplex st » ste-2000tm compact1 » e-2000tm compact1
e-2000tm compact1 » sc-duplexe-2000tm simplex1 » e-2000tm simplex1
sc-simplex APc » sc-simplex APce-2000tm simplex1 hrl » e-2000tm simplex1 hrl
VariableVariableVariableVariableVariableVariableVariableVariableVariable
0 6 2 A 0 1 8 00 6 0 A 0 2 3 00 8 7 A 2 0 6 80 6 0 A 0 1 8 00 6 9 A 2 2 5 60 6 9 A 2 2 8 90 6 9 A 2 1 8 00 6 2 A 0 6 1 00 6 9 A 2 2 0 0
0 6 2 A 0 1 6 0 om30 6 0 A 0 2 1 0 om30 8 7 A 2 0 7 8 om30 6 0 A 0 1 6 0 om30 6 9 A 2 2 5 7 om30 6 9 A 2 2 8 4 om30 6 9 A 2 1 6 0 om3
– –
0 6 2 A 0 1 6 0 om40 6 0 A 0 2 1 0 om40 8 7 A 2 0 7 8 om40 6 0 A 0 1 6 0 om40 6 9 A 2 2 5 7 om40 6 9 A 2 2 8 4 om40 6 9 A 2 1 6 0 om4
––
operating temperature range -10 °c to +60 °c, patchcords for other operating temperature ranges on request. other connector combinations, cable and fiber data sheets on request. 1 = type r+m with zirconia ceramic ferrule.
AssemblIes PAtchcords
131ROSENBERGER OSI PRODUCT CATALOG
PAtc
hco
rds
2
duplex patchcordcable type double-jacket I-V(Zn)hh 2 x 2.1 mm frnc-lsZh
duplex patchcordcable type double-jacket I-V(Zn)hh 2 x 2.8 mm frnc-lsZh
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
lc-duplex » lc-duplexlc-duplex » sc-duplexmU-duplex-horizontal » mU-duplex-horizontal mU-duplex-horizontal » lc-duplexe-2000tm compact1 » e-2000tm compact1
e-2000tm compact1 » lc-duplexe-2000tm simplex1 » e-2000tm simplex1
sc-simplex APc » sc-simplex APce-2000tm simplex1 hrl » e-2000tm simplex1 hrl
VariableVariableVariableVariableVariableVariableVariableVariable Variable
0 8 7 A 1 9 0 00 8 7 A 2 0 0 00 8 8 A 0 2 0 60 8 7 A 4 0 0 20 6 9 A 3 0 4 90 8 7 A 1 2 0 50 6 9 A 2 1 8 10 6 2 A 0 6 2 70 6 9 A 2 2 0 2
0 8 7 A 1 9 1 1 om30 8 7 A 2 0 7 9 om30 8 8 A 0 2 1 6 om30 8 7 A 4 0 0 9 om30 6 9 A 3 0 5 9 om30 8 7 A 1 2 0 1 om30 6 9 A 2 1 6 1 om3
––
0 8 7 A 1 9 1 1 om40 8 7 A 2 0 7 9 om40 8 8 A 0 2 1 6 om40 8 7 A 4 0 0 9 om40 6 9 A 3 0 5 9 om40 8 7 A 1 2 0 1 om40 6 9 A 2 1 6 1 om4
––
operating temperature range -10 °c to +60 °c, patchcords for other operating temperature ranges on request. other connector combinations, cable and fiber data sheets on request. 1 = type r+m with zirconia ceramic ferrule.
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
sc-duplex » sc-duplexsc-duplex » stsc-duplex » lc-duplexst » ste-2000tm compact1 » e-2000tm compact1
e-2000tm compact1 » sc-duplexe-2000tm simplex1 » e-2000tm simplex1
sc-simplex APc » sc-simplex APce-2000tm simplex1 hrl » e-2000tm simplex1 hrl
VariableVariableVariableVariableVariableVariableVariableVariable Variable
0 6 2 A 0 1 7 90 6 0 A 0 2 2 90 8 7 A 2 0 6 90 6 0 A 0 1 9 80 6 9 A 3 0 4 30 6 2 A 0 9 0 20 6 9 A 2 1 7 90 6 2 A 0 6 1 20 6 9 A 2 2 0 1
0 6 2 A 0 1 5 9 om30 6 0 A 0 2 0 9 om30 8 7 A 2 0 1 1 om30 6 0 A 0 1 8 6 om30 6 9 A 3 0 4 5 om30 6 2 A 0 9 1 2 om30 6 9 A 2 1 5 9 om3
––
0 6 2 A 0 1 5 9 om40 6 0 A 0 2 0 9 om40 8 7 A 2 0 1 1 om40 6 0 A 0 1 8 6 om40 6 9 A 3 0 4 5 om40 6 2 A 0 9 1 2 om40 6 9 A 2 1 5 9 om4
––
operating temperature range -10 °c to +60 °c, patchcords for other operating temperature ranges on request. other connector combinations, cable and fiber data sheets on request. 1 = type r+m with zirconia ceramic ferrule.
AssemblIes PAtchcords
132 ROSENBERGER OSI PRODUCT CATALOG
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
lc-compact » lc-compactlc-compact APc » lc-compact APc
Variable Variable
0 8 7 A 6 6 2 0 g 6 5 7 A0 8 7 A 6 6 2 2 g 6 5 7 A
0 8 7 A 6 6 2 3 om3–
0 8 7 A 6 6 2 3 om4–
oprerating temperature range -10 °c to +60 °c, patchcords for other oprerating temperature ranges on request. other connector combinations, cable and fiber data sheets on request.
duplex patchcordcable type round I-V(Zn)h 2.0 mm frnc-lsZh
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
lc-compact » lc-compactlc-compact APc » lc-compact APc
Variable Variable
0 8 7 A 6 6 0 00 8 7 A 6 6 0 9
0 8 7 A 6 6 0 1 om3–
0 8 7 A 6 6 0 1 om4–
operating temperature range -10 °c to +60 °c, patchcords for other operating temperature ranges on request. other connector combinations, cable and fiber data sheets on request.
duplex patchcordcable type round I-V(Zn)h 2.8 mm frnc-lsZh
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
lc-compact » lc-compactlc-compact APc » lc-compact APc
Variable Variable
0 8 7 A 6 6 1 0 g 6 5 7 A0 8 7 A 6 6 1 2 g 6 5 7 A
0 8 7 A 6 6 1 3 om3–
0 8 7 A 6 6 1 3 om4–
operating temperature range -10 °c to +60 °c, patchcords for other operating temperature ranges on request. other connector combinations, cable and fiber data sheets on request.
duplex patchcordcable type double-jacket-round I-V(Zn)h(Zn) 2.8/5.0 mm frnc-lsZh
AssemblIes PAtchcords
133ROSENBERGER OSI PRODUCT CATALOG
PAtc
hco
rds
2
patchcords copper
patchcords for preconnect® copper trunk tor
patchcords for preconnect® copper trunk / Multi JuMper
PArtnUmbers screened cat. 6 rJ45 connectors with molded boots at cat. 7 s/ftP frnc-lsZh flex cable grey
length partnuMBers
1 m2 m3 m5 m
8 0 0 A 0 0 0 18 0 0 A 0 0 0 38 0 0 A 0 0 0 58 0 0 A 0 0 0 7
other lengths, colours and types on request.
PArtnUmbers screened cat. 6 rJ45 connectors at cat. 7 s/ftP frnc-lsZh flex cable grey
length partnuMBers
1 m2 m3 m5 m
8 0 0 A 0 1 9 58 0 0 A 0 1 9 68 0 0 A 0 1 9 48 0 0 A 0 1 9 7
other lengths, colours and types on request.
AssemblIes PAtchcords
134 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons • Pigtails appropriate for use in data centers and office
buildings• Pigtails for other applications on request
ProPertIes • operating temperature range -10 °c to +60 °c, pigtails for
other operating temperature ranges on request
length tolerAnces:• Up to 1 m = +/- 50 mm
2 m to 3 m = +/- 100 mm 4 m to 25 m = +/- 200 mm longer than 25 m = +/- 1 %
pigtails
cAble tyPes• Available as cable pigtails and buffered-fiber pigtails• cable data sheets on request
fIber tyPes• with all standard fiber types available• fiber data sheets on request
connectors• with all standard connectors available
delIVery form• factory Insertion loss (Il) measured acc. to Iec 61300-3-4
methode ”b“, measurement report on request• serial number label on pigtail• each packed in a foil bag with Product Id label
AssemblIes PIgtAIls
135ROSENBERGER OSI PRODUCT CATALOG
PIg
tAIl
s
2
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
scstmUlce-2000tm 1
fc Pc sc APcmU APc lc APc e-2000™ hrl1
fc APc
2.5 m2.5 m2.5 m2.5 m2.5 m2.5 m2.5 m2.5 m2.5 m2.5 m2.5 m
0 6 2 A 0 0 5 30 6 0 A 0 0 5 30 8 8 A 1 7 4 30 8 7 A 1 7 4 30 6 9 A 2 0 5 30 6 8 A 0 0 5 30 6 2 A 0 9 8 20 8 8 A 1 7 4 60 8 7 A 1 7 4 60 6 9 A 2 0 8 30 6 8 A 0 0 7 1
0 6 2 A 0 0 1 3 om30 6 0 A 0 0 1 3 om30 8 8 A 1 7 4 4 om30 8 7 A 1 7 4 4 om30 6 9 A 2 0 1 3 om30 6 8 A 0 0 1 3 om3
–––––
0 6 2 A 0 0 1 3 om40 6 0 A 0 0 1 3 om40 8 8 A 1 7 4 4 om40 8 7 A 1 7 4 4 om40 6 9 A 2 0 1 3 om40 6 8 A 0 0 1 3 om4
–––––
operating temperature range -10 °c to +60 °c, pigtails for other operating temperature ranges on request. other connectors, cable and fiber data sheets on request. 1 = type r+m with zirconia ceramic ferrule.
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
sclce-2000tm 1
fc Pcsc APc lc APc e-2000™ hrl1 fc APc
2.5 m2.5 m2.5 m2.5 m
Variable2.5 m2.5 m2.5 m
0 6 2 A 0 0 4 30 8 7 A 6 0 1 10 6 9 A 2 0 4 30 6 8 A 0 0 4 30 6 2 A 0 0 7 50 8 7 A 6 0 1 30 6 9 A 2 0 9 30 6 8 A 0 0 7 5
0 6 2 A 0 0 0 3 om30 8 7 A 6 0 1 5 om30 6 9 A 2 0 0 3 om30 6 8 A 0 0 0 3 om3
––––
0 6 2 A 0 0 0 3 om40 8 7 A 6 0 1 5 om40 6 9 A 2 0 0 3 om40 6 8 A 0 0 0 3 om4
––––
operating temperature range -10 °c to +60 °c, pigtails for other operating temperature ranges on request. other connectors, cable and fiber data sheets on request. 1 = type r+m with zirconia ceramic ferrule.
PArtnUmbers
connector length os2 9/125
oM3 50/125
oM4 50/125
mUlcmU APc lc APc
2.5 m2.5 m2.5 m2.5 m
0 8 8 A 1 8 3 50 8 7 A 6 0 0 10 8 8 A 1 8 3 60 8 7 A 6 0 0 3
0 8 8 A 1 8 4 5 om30 8 7 A 6 0 0 5 om3
––
0 8 8 A 1 8 4 5 om40 8 7 A 6 0 0 5 om4
––
operating temperature range -10 °c to +60 °c, pigtails for other operating temperature ranges on request. other connectors, cable and fiber data sheets on request. 1 = type r+m with zirconia ceramic ferrule.
AssemblIes PIgtAIls
BuFFered-FiBer pigtailbuffered-fiber type I-Vh 1 x 900 µm frnc-lsZh dry compact
caBle pigtailcable type I-V(Zn) h 1 x 2.1 mm frnc-lsZh
caBle pigtailcable type I-V(Zn)h 1 x 2.8 mm frnc-lsZh
136 ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons • Installation in splice panels
ProPertIes• fibers and buffer jackets in 12 different colours according
to the dIn Vde 0888 colour code – thereby fast and reliable identification and allocation of fibers inside the cassette to the assembled connectors (1)
• easy and secure handling due to transparent bundle jacket covering the 12 buffered-fibers
cAble tyPes• single dry 900 μm buffered-fiber lb 900• cable data sheets on request
fIber tyPes• with all standard fiber types available• fiber data sheets on request
FactorY asseMBled splice cassetteswith 12 fiber pigtail bundle cable
1
free single leg lengths- adjustable during installation
self-adhesive tube clamp to fixthe bundle inside the panel.
connectors• with all standard connectors available
delIVery form• factory Insertion loss (Il) measured acc. to Iec 61300-3-4
methode ”b“, measurement report on request• serial number and product Id label• with self-adhesive tube clamp• single packaging• without splice holder, splice protector and cassette cover –
these can be ordered separately at page 174
AssemblIes fActory Assembled sPlIce cAssettes
137ROSENBERGER OSI PRODUCT CATALOG
fAc
tory
Ass
embl
ed s
PlIc
e c
Ass
ette
s
2
PArtnUmbers length: 2 m
connector nuMBer oF FiBers os2 9/125
oM3 50/125
oM4 50/125
stsc-simplexlc-simplexe-2000tm simplex1
e-2000tm simplex hrlmU-simplex
121212121212
1 1 7 A 4 0 0 51 1 7 A 4 0 0 31 1 7 A 4 0 1 41 1 7 A 4 0 0 81 1 7 A 4 0 0 91 1 7 A 4 0 1 5
1 1 7 A 4 1 0 5 om31 1 7 A 4 1 0 3 om31 1 7 A 4 1 1 4 om31 1 7 A 4 1 0 8 om3
–1 1 7 A 4 1 1 5 om3
1 1 7 A 4 1 0 5 om41 1 7 A 4 1 0 3 om41 1 7 A 4 1 1 4 om41 1 7 A 4 1 0 8 om4
–1 1 7 A 4 1 1 5 om4
other connectors, cable and fiber data sheets on request. 1 = type r+m with zirconia ceramic ferrule.
AssemblIes fActory Assembled sPlIce cAssettes
141ROSENBERGER OSI PRODUCT CATALOG
3PAnels And rAcKs: PAnels
panel hardware from rosenberger osI. whether universal panels or special requirements from customers – e.g. the explosion protected wallca-binet for use in mining (see page 31) – we offer distribution units for all environmental condi-tions to safely protect the sensitive fiber optic components.
thinking about the need of panels choose rosenberger osI – the best ever. from classical distribution to modular multifunctional panels or highly flexible module panels – our easy to install 19” panels are designed to fulfill your demands and to fit perfectly into each struc-tured cabling. even where no 19“ applications are available or necessary, you can rely on the
142 ROSENBERGER OSI PRODUCT CATALOG
19” 1 hu and 2 hu distriBution panel
type: fixed installation
type: fixed installation
type: telescopic full-pullout
2 hU for UP to 48 chAnnels (96 fIbers)
1 hU for UP to 24 chAnnels (48 fIbers)
PAnels
type: telescopic full-pullout
143ROSENBERGER OSI PRODUCT CATALOG
3
PAn
els
telescopic full-pullouttelescopic full-pullout
.
dImensIons 1 hU dImensIons 2 hU
APPlIcAtIons• for installation in 19“ racks • to interconnected e.g. Preconnect® fIber trunks
with patchcords
ProPertIes• basic panel with optimized functionality• suitable to accept all cables assembled by
rosenberger osI• Available in two types: • fixed installation • telescopic full-pullout: can be pulled out completely
• torsion and strain resistant cable supports for • 2 Preconnect® trunk cable dividers for 1 hU• 4 Preconnect® trunk cable dividers for 2 hU
• 2 Pg 21 (29 mm) cable inputs • cable guidance 45° slant backwards, lead-way to be selected• 2 universal supports for simplex, duplex and breakout
cables available, see accessories pages 144 / 145• screen print front plate labeling:
numerical and alphanumerical • material and colour:• body: aluminium, nature • front: aluminium powder coated, rAl 7035 (lightgrey)
• weight (panel without couplers):• fixed installation: 1 hU - 1120 g
2 hU - 1580 g • telescopic full-pullout: 1 hU - 1600 g
2 hU - 2140 g
delIVery form• Panel completely factory assembled• mounted couplers • blind covers in unused cable inputs• blind covers in unused front plate ports
AccessorIes• see pages 144 / 145 and 174 – 177
PAnels
optional: 19” 3 hU distribution panel on request
144 ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” 1 hu distriBution panel
PArtnUmbers1 hU rAl 7035 (lightgrey)
FiBer count tYpe oF couplerFixed installation telescopic Full-pullout
sM MM sM MM
12
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
e-2000™ » e-2000™ simplex1 hrllc » lc-duplex sm
om3om4
2 3 1 A 0 1 8 3––
2 3 1 A 0 1 5 32 3 1 A 0 4 2 0
––
2 3 1 A 1 0 0 32 3 1 A 0 1 7 3
––
–2 3 1 A 1 6 0 3 om32 3 1 A 1 6 0 3 om4
2 3 1 A 0 0 1 3–
2 3 1 A 04 4 0 om32 3 1 A 04 4 0 om4
––
2 3 1 A 1 2 9 3 om32 3 1 A 1 2 9 3 om4
2 3 0 A 0 1 8 3––
2 3 0 A 0 1 5 32 3 0 A 0 4 2 0
––
2 3 0 A 1 0 0 32 3 0 A 0 1 7 3
––
–2 3 0 A 1 6 0 3 om32 3 0 A 1 6 0 3 om4
2 3 0 A 0 0 1 3–
2 3 0 A 0 4 4 0 om32 3 0 A 0 4 4 0 om4
––
2 3 0 A 1 2 9 3 om32 3 0 A 1 2 9 3 om4
24
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
e-2000™ » e-2000™ simplex1 hrllc » lc-duplex sm
om3om4
2 3 1 A 0 1 8 5––
2 3 1 A 0 1 5 52 3 1 A 0 4 2 1
––
2 3 1 A 1 0 0 52 3 1 A 0 1 7 5
––
–2 3 1 A 1 6 0 5 om32 3 1 A 1 6 0 5 om4
2 3 1 A 0 0 1 5–
2 3 1 A 0 4 4 1 om32 3 1 A 0 4 4 1 om4
––
2 3 1 A 1 2 9 5 om32 3 1 A 1 2 9 5 om4
2 3 0 A 0 1 8 5––
2 3 0 A 0 1 5 52 3 0 A 0 4 2 1
––
2 3 0 A 1 0 0 52 3 0 A 0 1 7 5
––
–2 3 0 A 1 6 0 5 om32 3 0 A 1 6 0 5 om4
2 3 0 A 0 0 1 5–
2 3 0 A 0 4 4 1 om32 3 0 A 0 4 4 1 om4
––
2 3 0 A 1 2 9 5 om32 3 0 A 1 2 9 5 om4
48
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
lc » lc-duplex sm om3 om4
2 3 1 A 0 1 8 7––
2 3 1 A 0 1 5 82 3 1 A 0 4 2 2
––
2 3 1 A 0 1 7 7––
–2 3 1 A 1 6 0 7 om32 3 1 A 1 6 0 7 om4
2 3 1 A 0 0 1 8–
2 3 1 A 0 4 4 2 om32 3 1 A 0 4 4 2 om4
–2 31 A 1 2 9 8 om32 31 A 1 2 9 8 om4
2 3 0 A 0 1 8 7––
2 3 0 A 0 1 5 82 3 0 A 0 4 2 2
––
2 3 0 A 0 1 7 7––
–2 3 0 A 1 6 0 7 om32 3 0 A 1 6 0 7 om4
2 3 0 A 0 0 1 8–
2 3 0 A 0 4 4 2 om32 3 0 A 0 4 4 2 om4
–2 3 0 A 1 2 9 8 om32 3 0 A 1 2 9 8 om4
more couplers and fiber counts on request. 1 = type r+m.
PArtnUmbers AccessorIes 1 hU
tertiary cable support standard
1 pcs. 1 1 1 A 0 4 0 3
tertiary cable support large, with brush
1 pcs. 1 1 1 A 0 4 1 8
support for 4 Preconnect® trunks
1 set = 2 plates 1 1 1 A 0 4 1 6
support (straight) for 6 Preconnect® trunks
1 set = 2 plates 1 1 1 A 0 4 2 5
1 hU labeling field 30 x 35 mm 1 pcs. 1 1 1 A 0 4 1 5
more accessories see pages 174 – 177.
145ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” 2 hu distriBution panel
PArtnUmbers2 hU rAl 7035 (lightgrey)
FiBer count tYpe oF coupler Fixed installation telescopic Full-pullout
sM MM sM MM
48
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
e-2000™ » e-2000™ simplex1 hrllc » lc-duplex sm
om3 om4
2 3 5 A 1 5 2 7––
2 3 5 A 0 1 5 72 3 5 A 0 1 8 0
––
2 3 5 A 1 0 0 72 3 5 A 1 2 8 7
––
–2 3 5 A 1 5 4 7 om32 3 5 A 1 5 4 7 om4
2 3 5 A 0 0 1 7–
2 3 5 A 0 4 0 0 om32 3 5 A 0 4 0 0 om4
––
2 3 5 A 1 3 1 7 om32 3 5 A 1 3 1 7 om4
2 3 4 A 1 5 2 7––
2 3 4 A 0 1 5 72 3 4 A 0 1 8 0
––
2 3 4 A 1 0 0 72 3 4 A 1 2 8 7
––
–2 3 4 A 1 5 4 7 om32 3 4 A 1 5 4 7 om4
2 3 4 A 0 0 1 7–
2 3 4 A 0 4 0 0 om32 3 4 A 0 4 0 0 om4
––
2 3 4 A 1 3 1 7 om32 3 4 A 1 3 1 7 om4
96
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
lc » lc-duplex sm om3 om4
2 3 5 A 1 5 3 0––
2 3 5 A 0 1 6 82 3 5 A 0 1 8 1
––
2 3 5 A 1 2 8 9––
–2 3 5 A 1 5 5 0 om32 3 5 A 1 5 5 0 om4
2 3 5 A 0 0 1 9–
2 3 5 A 0 4 0 1 om32 3 5 A 0 4 0 1 om4
–2 3 5 A 1 3 1 9 om32 3 5 A 1 3 1 9 om4
2 3 4 A 1 5 3 0––
2 3 4 A 0 1 6 82 3 4 A 0 1 8 1
––
2 3 4 A 1 2 8 9––
–2 3 4 A 1 5 5 0 om32 3 4 A 1 5 5 0 om4
2 3 4 A 0 0 1 9–
2 3 4 A 0 4 0 1 om32 3 4 A 0 4 0 1 om4
–2 3 4 A 1 3 1 9 om32 3 4 A 1 3 1 9 om4
more couplers and fiber counts on request. 1 = type r+m.
3
PAn
els
PArtnUmbersAccessorIes 2 hU
tertiary cable support standard
1 pcs. 1 1 1 A 0 4 0 3
tertiary cable support large, with brush
1 set = 2 pcs. 1 1 1 A 0 6 1 1
support for 8 Preconnect® trunks
1 set = 4 plates 1 1 1 A 0 6 1 2
support (straight) for 12 Preconnect® trunks
1 set = 4 plates 1 1 1 A 0 6 1 3
2 hU labeling field 30 x 88 mm
1 pcs. 1 1 1 A 0 6 1 0
more accessories see pages 174 – 177.
146 ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” 1 hu and 2 hu splice panel
type: fixed installation
type: telescopic full-pullout
2 hU for UP to 48 chAnnels (96 fIbers)
type: fixed installation
type: telescopic full-pullout
1 hU for UP to 24 chAnnels (48 fIbers)
147ROSENBERGER OSI PRODUCT CATALOG
PAnels
dImensIons 1 hU dImensIons 2 hU
APPlIcAtIons• for installation in 19“ racks
ProPertIes• basic panel with optimized functionality• for splicing of all standard types of pigtails on all standard
types of cables • the panel is available in two types: • fixed installation • telescopic full-pullout: can be pulled out completely
• twist secure supports for max. 4 splice cassettes in 1 hU for max. 8 splice cassettes in 2 hU, cassette type see accessories page 174
• 2 Pg21 (29 mm) cable inputs cable guidance 45° slant backwards, lead-way to be selected
• 2 universal supports for simplex-, duplex- and breakout cables available, see accessories pages 148 / 149
• screen print front plate labeling: numerical and alphanumerical
• material and colour: • body: aluminium natural• front: aluminium powder coated, rAl 7035 (lightgrey)
• weight (panel without couplers and cassettes):• fixed installation: 1 hU - 1120 g
2 hU - 1580 g• telescopic full-pullout: 1 hU - 1600 g
2 hU - 2140 g
oPtIonAl• with splice cassettes, holders, protectors and cable
glands, see pages 174 – 177• Pigtails ready for splicing laid in (fiber counts to be divided
by 12 are delivered with factory assembled splice cassettes, see pages 136 / 137)
delIVery form• Panel factory assembled incl. couplers• blind covers in unused cable inputs• blind covers in unused front plate ports • Including splice cassette cover
AccessorIes• see pages 148 / 149 and 174 – 177• factory assembled splice cassettes see pages 136 / 137• Pigtails see pages 134 / 135
telescopic full-pullouttelescopic full-pullout
3
PAn
els
148 ROSENBERGER OSI PRODUCT CATALOG
PAnels
PArtnUmbers1 hU rAl 7035 (lightgrey)
FiBer count tYpe oF coupler Fixed installation telescopic Full-pullout
sM MM sM MM
12
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
e-2000™ » e-2000™ simplex1 hrllc » lc-duplex sm
om3 om4
2 3 1 A 0 3 6 3––
2 3 1 A 0 3 3 32 3 1 A 1 5 9 0
––
2 3 1 A 1 1 0 32 3 1 A 0 3 5 3
––
–2 3 1 A 1 5 8 3 om32 3 1 A 1 5 8 3 om4
2 3 1 A 0 2 1 3–
2 3 1 A 1 6 6 0 om32 3 1 A 1 6 6 0 om4
––
2 3 1 A 1 3 2 3 om32 3 1 A 1 3 2 3 om4
2 3 0 A 0 3 6 3––
2 3 0 A 0 3 3 32 3 0 A 1 5 9 0
––
2 3 0 A 1 1 0 32 3 0 A 0 3 5 3
––
–2 3 0 A 1 5 8 3 om32 3 0 A 1 5 8 3 om4
2 3 0 A 0 2 1 3–
2 3 0 A 1 6 6 0 om32 3 0 A 1 6 6 0 om4
––
2 3 0 A 1 3 2 3 om32 3 0 A 1 3 2 3 om4
24
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
e-2000™ » e-2000™ simplex1 hrllc » lc-duplex sm
om3 om4
2 3 1 A 0 3 6 5––
2 3 1 A 0 3 3 52 3 1 A 1 5 9 1
––
2 3 1 A 1 1 0 52 3 1 A 0 3 5 5
––
–2 3 1 A 1 5 8 5 om32 3 1 A 1 5 8 5 om4
2 3 1 A 0 2 1 5–
2 3 1 A 1 6 6 1 om32 3 1 A 1 6 6 1 om4
––
2 3 1 A 1 3 2 5 om32 3 1 A 1 3 2 5 om4
2 3 0 A 0 3 6 5––
2 3 0 A 0 3 3 52 3 0 A 1 5 9 1
––
2 3 0 A 1 1 0 52 3 0 A 0 3 5 5
––
–2 3 0 A 1 5 8 5 om32 3 0 A 1 5 8 5 om4
2 3 0 A 0 2 1 5–
2 3 0 A 1 6 6 1 om32 3 0 A 1 6 6 1 om4
––
2 3 0 A 1 3 2 5 om3 2 3 0 A 1 3 2 5 om4
48
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
lc » lc-duplex sm om3 om4
2 3 1 A 0 3 6 8––
2 3 1 A 0 3 3 92 3 1 A 1 5 9 2
––
2 3 1 A 0 3 5 8––
–2 3 1 A 1 5 8 7 om32 3 1 A 1 5 8 7 om4
2 3 1 A 0 2 1 9–
2 3 1 A 1 6 6 2 om32 3 1 A 1 6 6 2 om4
–2 3 1 A 1 3 2 8 om32 3 1 A 1 3 2 8 om4
2 3 0 A 0 3 6 8––
2 3 0 A 0 3 3 92 3 0 A 1 5 9 2
––
2 3 0 A 0 3 5 8––
–2 3 0 A 1 5 8 7 om32 3 0 A 1 5 8 7 om4
2 3 0 A 0 2 1 9–
2 3 0 A 1 6 6 2 om32 3 0 A 1 6 6 2 om4
–2 3 0 A 1 3 2 8 om32 3 0 A 1 3 2 8 om4
more connectivity systems and fiber counts on request. 1 = type r+m.
19” 1 hu splice panel
PArtnUmbers AccessorIes 1 hU
tertiary cable supports standard
1 pcs. 1 1 1 A 0 4 0 3
tertiary cable supports large, with brush
1 pcs. 1 1 1 A 0 4 1 8
support for 6 cable glands up to Pg 16
1 set = 2 plates(without cable glands)
1 1 1 A 0 4 1 7
1 hU labeling field 30 x 35 mm 1 pcs. 1 1 1 A 0 4 1 5
more accessories see pages 174 – 177.
149ROSENBERGER OSI PRODUCT CATALOG
PAnels
PArtnUmbers2 hU rAl 7035 (lightgrey)
FiBer count tYpe oF coupler Fixed installation telescopic Full-pullout
sM MM sM MM
48
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
e-2000™ » e-2000™ simplex1 hrllc » lc-duplex sm
om3 om4
2 3 5 A 1 5 6 8––
2 3 5 A 0 3 3 82 3 5 A 0 4 5 0
––
2 3 5 A 1 1 0 82 3 5 A 0 3 7 8
––
–2 3 5 A 1 5 8 8 om32 3 5 A 1 5 8 8 om4
2 3 5 A 0 2 1 8–
2 3 5 A 0 5 0 0 om32 3 5 A 0 5 0 0 om4
––
2 3 5 A 1 3 2 8 om32 3 5 A 1 3 2 8 om4
2 3 4 A 1 5 6 8––
2 3 4 A 0 3 3 82 3 4 A 0 4 5 0
––
2 3 4 A 1 1 0 82 3 4 A 0 3 7 8
––
–2 3 4 A 1 5 8 8 om32 3 4 A 1 5 8 8 om4
2 3 4 A 0 2 1 8–
2 3 4 A 0 5 0 0 om32 3 4 A 0 5 0 0 om4
––
2 3 4 A 1 3 2 8 om32 3 4 A 1 3 2 8 om4
96
mU » mU-duplex-horizontal sm om3 om4sc » sc-duplex metalsc-duplex » sc-duplex plastic sm
om3om4
lc » lc-duplex sm om3 om4
2 3 5 A 1 5 7 1––
2 3 5 A 1 5 1 32 3 5 A 0 4 5 1
––
2 3 5 A 0 3 8 1––
–2 3 5 A 1 5 9 1 om32 3 5 A 1 5 9 1 om4
2 3 5 A 1 5 1 2–
2 3 5 A 0 5 0 1 om32 3 5 A 0 5 0 1 om4
–2 3 5 A 1 3 3 1 om32 3 5 A 1 3 3 1 om4
2 3 4 A 1 5 7 1––
2 3 4 A 1 5 1 32 3 4 A 0 4 5 1
––
2 3 4 A 0 3 8 1––
–2 3 4 A 1 5 9 1 om32 3 4 A 1 5 9 1 om4
2 3 4 A 1 5 1 2–
2 3 4 A 0 5 0 1 om32 3 4 A 0 5 0 1 om4
–2 3 4 A 1 3 3 1 om32 3 4 A 1 3 3 1 om4
more connectivity systems and fiber counts on request. 1 = type r+m.
19” 2 hu splice panel
3
PAn
els
PArtnUmbersAccessorIes 2 hU
tertiary cable supports standard
1 pcs. 1 1 1 A 0 4 0 3
tertiary cable supports large, with brush
1 set = 2 pcs. 1 1 1 A 0 6 1 1
support for 6 cable glands up to Pg 16
1 set = 4 plates(without cable glands)
1 1 1 A 0 6 1 4
2 hU labeling field 30 x 88 mm
1 pcs. 1 1 1 A 0 6 1 0
more accessories see pages 174 – 177.
150 ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” 3 hu distriBution Module panel
APPlIcAtIons• for installation in 19“ racks• to interconnect e.g. Preconnect® fIber trunks with
patchcords
ProPertIes• highly flexible and universal applicable panel by
its modular front plates and back planes• suitable to accept all by rosenberger osI
assembled cables• for up to 144 channels (288 fibers)• with cut out pattern acc. to Iec 60297-3 in 84 dividing
units (dU)• to accept up to 12 individual 3 hU - 7 dU part front plates• Available with two back plane types:
1. Z-blade-back plane – designed to accept 12 of our Preconnect® fIber trunks 2. tertiary cable back plane – to support simplex-, duplex- and break out cables with cable ties
• back plane types as described above and shown on page 151
• the module panel is a modular platform for different connectivity systems and fo fiber types
• matrix numbering of the part front plates (PfPs): channels in PfPs = 1 to n in labeling fields PfPs in module panel = 1 to n number clips (example: channel 3-4 means in PfP 3 channel 4)
• material and colour: body and front: aluminium, available in silver anodized or rAl 9005 (black) version
• weight:• module panel unassembled approx.: 2.0 kg• Part front plate assembled approx.: 0.1 kg
delIVery form• Part front plates factory assembled incl. fo couplers,
labeling and screws• module panel factory assembled with corresponding
back plane
AccessorIes• see pages 174 – 177
151ROSENBERGER OSI PRODUCT CATALOG
PArtnUmberssIngle comPonents
19“ 3 hu distriBution Module panel with Z-blade back plane designed to accept 12 Preconnect® trunks
236 mm deep, front silver236 mm deep, front black 295 mm deep, front silver 295 mm deep, front black
1 4 1 A 0 0 0 01 4 1 A 3 0 0 01 4 1 A 1 5 0 01 4 1 A 3 5 0 0
19“ 3 hu distriBution Module panel tertiary cable back plane
236 mm deep, front silver 295 mm deep, front black
1 4 1 A 0 0 0 7on request
3 hu - 7 du Blind part Front plate silver black
1 4 1 A 0 0 0 2 1 4 1 A 3 0 1 0
3 hu - 7 du patch Field part Front plates Assembled with couplers
FiBer count
colour oF Front tYpe oF coupler sM oM3 oM4
12
silverblacksilverblack
sc » sc-duplex metalsc » sc-duplex metale-2000™ » e-2000™ hrl1
e-2000™ » e-2000™ hrl1
1 4 1 A 0 1 4 31 4 1 A 3 0 5 1 1 4 1 A 0 8 1 3
on request
1 4 1 A 0 0 4 3 om31 4 1 A 3 0 5 0 om3
–on request
1 4 1 A 0 0 4 3 om41 4 1 A 3 0 5 0 om4
–on request
24
silverblacksilverblack
mU » mU-duplex-horizontalmU » mU-duplex-horizontal lc » lc-duplex lc » lc-duplex
1 4 1 A 0 1 7 51 4 1 A 3 0 4 11 4 1 A 0 1 3 51 4 1 A 3 0 3 1
1 4 1 A 0 1 8 5 om31 4 1 A 3 0 4 0 om31 4 1 A 0 1 6 5 om31 4 1 A 3 0 3 0 om3
1 4 1 A 0 1 8 5 om41 4 1 A 3 0 4 0 om41 4 1 A 0 1 6 5 om41 4 1 A 3 0 3 0 om4
further couplers and fiber counts on request. 1 = type r+m.
PAnels
dImensIons
depth selectable 236 mm or 295 mm
3
PAn
els
152 ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” 3+1 hu splice Module panel
APPlIcAtIons• for installation in 19“ racks
ProPertIes• Very installation and service friendly• Appropriate for splice cabling with a high number of fibers• with cut out pattern acc. to Iec 60297-3 in 84 dividing
units (dU)• for up to 144 channels (288 fibers)• to accept up to 12 individual 3 hU – 7 dU splice plug-in
modules• Up to 12 single loose tube cables can be fixed in the 1 hU
tray with 11 x Pg 16 and 1 x Pg 21 cable glands, see page 153
• cable guidance straight backwards• the loose tube reserve is stored inside the 1 hU tray
and guided towards the modules by protection tubes• these tubes protect loose tubes against kinking
while installing the splice plug-in modules• the modules are guided by guide rails inside the enclosure
and can be pulled out completely• the module panel is a modular platform for different
connectivity systems and fo types• matrix numbering of the modules:
channels in modules: 1 to n in labeling fields, modules in module panel: 1 to n number clips
(example: channel 3 - 4 means in module 3 channel 4)• material and colour:
body and front: aluminium, silver anodized• weight: • module panel unassembled approx. 2.0 kg• splice plug-in module approx. 0.5 kg
delIVery form• splice plug-in modules factory assembled incl.:• ready for splicing buffered fiber pigtails• fo couplers• splice holders and protectors• cassette cover• labeling field and screws• loose tube protection tube with mounting material
• module panel completely factory assembled with 1 hU tray without cable glands
AccessorIes• see pages 174 – 177
3 +1
hU
1 h
U3
hU
3 hU module panel
1 hU tray
153ROSENBERGER OSI PRODUCT CATALOG
PArtnUmberssIngle comPonents
19“ 3 hu splice Module panel for splice plug-in modules incl. 1 hU tray with patchcord guide
1 4 1 A 0 0 0 1
3 hu - 7 du Blind part Front plate silver black
1 4 1 A 0 0 0 2 1 4 1 A 3 0 1 0
3 hu - 7 du splice plug-in Modules incl. assembled pigtails
FiBer count tYpe oF coupler sM os2 oM3 oM4
12sc » sc-duplex metale-2000™ hrl1 » e-2000™ hrl1
1 4 1 A 0 5 1 31 4 1 A 0 8 3 3
1 4 1 A 0 6 1 3 om3–
1 4 1 A 0 6 1 3 om4–
24mU » mU-duplex-horizontal lc » lc-duplex
1 4 1 A 0 9 3 51 4 1 A 0 8 8 5
1 4 1 A 0 9 4 5 om31 4 1 A 0 8 9 5 om3
1 4 1 A 0 9 4 5 om31 4 1 A 0 8 9 5 om3
further couplers and fiber counts on request. 1 = type r+m.
PAnels
dImensIons
DU
5 x Pg 16 6 x Pg 16
1 x Pg 21
bAcK VIew:cAble glAnds on 1 hU trAy
3
PAn
els
154 ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” sMap distriBution panel
APPlIcAtIons• for installation in 19“ racks• to interconnect e.g. Preconnect® fIber trunks with
patchcords in data centers
ProPertIes• maximum of modularity and flexibility due to application
specific combinable 1/2 and 1/3 part front plates• Very robust panel at low weight• suitable to accept all cables assembled by
rosenberger osI• 1 to 4 hU assembled with 1 hU 1/2 or 1/3 part front plates
(PfP) depending on the number of fibers and coupler type• matrix numbering of the PfPs:
channels within PfPs are labeled 1 to n, PfPs within the panel are labeled 1 to n with clips (e.g.: channel 3 – 4 me-ans in PfP 3 channel 4)
• material and colour:• front: steel, powder coated rAl 9005 (black)• body: aluminium • back planes: steel, powder coated rAl 9005 (black)
delIVery form• completely factory assembled incl. couplers
AccessorIes• Part front plates (PfP) see page 155• back plane types see pages 160 / 161• labeling fields see page 176
standard back plane configurationfor max. 12 cable dividers per panel.
other back plane types see pages 160 / 161.
300 mm
4 hU: 176 mm
3 hU: 132 mm
2 hU: 88 mm
1 hU: 44 mm
19”: 483 mm
labeling fields
155ROSENBERGER OSI PRODUCT CATALOG
PAnels
3
PArtnUmberssIngle comPonents
19“ sMap distriBution panel to accept smAP part front plates, rAl 9005 (black)1 hU2 hU3 hU4 hU
1 6 1 A 0 0 0 11 6 2 A 0 0 0 11 6 3 A 0 0 0 11 6 4 A 0 0 0 1
sMap 1/3 part Front platerAl 9005 (black)
Blind part Front plate 1 6 0 A 0 0 0 1
nuMBer oF channels/
FiBers coupler tYpe
FiBer tYpe
sM oM3 oM4
8 ch / 16 F lc-duplex 1 6 0 A 0 0 9 0 1 6 0 A 0 1 0 0 om3 1 6 0 A 0 1 0 0 om4
sMap 1/2-part Front platerAl 9005 (black)
Blind part Front plate 1 6 0 A 0 0 0 2
nuMBer oF channels/
FiBers coupler tYpe
FiBer tYpe
sM oM3 oM4
12 ch / 24 F lc-duplex 1 6 0 A 0 1 2 0 1 6 0 A 0 1 3 0 om3 1 6 0 A 0 1 3 0 om4
18 ch / 36 F lc-duplex 1 6 0 A 0 1 3 5 1 6 0 A 0 1 4 0 om3 1 6 0 A 0 1 4 0 om4
24 ch / 48 F mU-duplex-horizontal 1 6 0 A 0 4 0 0 1 6 0 A 0 4 1 0 om3 1 6 0 A 0 4 1 0 om4
12 x 2 = 24 ch / 48 F
lc-Quad 1 6 0 A 0 4 3 0 1 6 0 A 0 4 4 0 om3 1 6 0 A 0 4 4 0 om4
further coupler types and numbers of fibers on request.
PAn
els
156 ROSENBERGER OSI PRODUCT CATALOG
PAnels
standard back plane configurationfor max. 4 splice cassettes (sPc) perheight unit (hU) and 6 Pg21 cableglands per panel.
1 hU = 4 sPc2 hU = 8 sPc3 hU = 12 sPc
other back plane types see pages 160 / 161.
300 mm
3 hU: 132 mm
2 hU: 88 mm
1 hU: 44 mm
2
1
19”: 483 mm
19” sMap splice panel
APPlIcAtIons• for installation in 19“ racks
ProPertIes• maximum of modularity and flexibility due to application
specific combinable 1/2 and 1/3 part front plates• Very robust panel at low weight• Appropriate for all standard pigtail and cable types• 1 to 3 hU assembled with 1 hU 1/2 or 1/3 part front plates
(PfP) depending on the number of fibers and coupler type• matrix numbering of PfPs: channels within PfPs are labeled
1 to n PfPs within the panel are labeled 1 to n with clips (e.g.: channel 3 - 4 means in PfP 3 channel 4)
• material and colour:• front: steel, powder coated rAl 9005 (black)• body: aluminium• back planes: steel, powder coated rAl 9005 (black)
oPtIonAl • splice cassettes, holders, protectors and cable glands,
see pages 174 – 177• Pigtails ready for splicing laid in (fiber counts to be divided
by 12 are delivered with factory assembled splice cassettes, see pages 136 / 137)
delIVery form:• completely factory assembled incl. couplers and
splice-cassette-holder with cover
AccessorIes• Pigtails see pages 134 / 135• factory assembled splice cassettes see pages 136 / 137• Part front plates (PfP) see page 155• back plane types see pages 160 / 161• labeling fields see page 176
157ROSENBERGER OSI PRODUCT CATALOG
PAnels
PArtnUmbers 19” smAP sPlIce PAnels
tYpe nuMBer oF For FiBer tYpe
hu coupler tYpe channels FiBers pFp tYpe sM oM3 oM4
1 mU-duplex-horizontal 468
12161824323648
8121624323648647296
1 x 1/21 x 1/21 x 1/21 x 1/21 x 1/21 x 1/21 x 1/22 x 1/22 x 1/22 x 1/2
1 6 1 A 3 0 8 0 1 6 1 A 3 0 8 1 1 6 1 A 3 0 8 2 1 6 1 A 3 0 8 3 1 6 1 A 3 0 8 4 1 6 1 A 3 0 8 5 1 6 1 A 3 0 8 6 1 6 1 A 3 0 8 7 1 6 1 A 3 0 8 8 1 6 1 A 3 0 8 9
1 6 1 A 3 0 9 0 om31 6 1 A 3 0 9 1 om31 6 1 A 3 0 9 2 om31 6 1 A 3 0 9 3 om31 6 1 A 3 0 9 4 om31 6 1 A 3 0 9 5 om31 6 1 A 3 0 9 6 om31 6 1 A 3 0 9 7 om31 6 1 A 3 0 9 8 om31 6 1 A 3 0 9 9 om3
1 6 1 A 3 0 9 0 om41 6 1 A 3 0 9 1 om41 6 1 A 3 0 9 2 om41 6 1 A 3 0 9 3 om41 6 1 A 3 0 9 4 om41 6 1 A 3 0 9 5 om41 6 1 A 3 0 9 6 om41 6 1 A 3 0 9 7 om41 6 1 A 3 0 9 8 om41 6 1 A 3 0 9 9 om4
1 lc-duplex 468
12161824
8121624323648
1 x 1/31 x 1/31 x 1/3
1 x 1/2 (12)2 x 1/3
2 x 1/2 (12)2 x 1/2 (12)
1 6 1 A 3 0 2 0 1 6 1 A 3 0 2 1 1 6 1 A 3 0 2 2 1 6 1 A 3 0 4 3 1 6 1 A 3 0 2 4 1 6 1 A 3 0 4 5 1 6 1 A 3 0 4 6
1 6 1 A 3 0 3 0 om31 6 1 A 3 0 3 1 om31 6 1 A 3 0 3 2 om31 6 1 A 3 0 5 3 om31 6 1 A 3 0 3 4 om31 6 1 A 3 0 5 5 om31 6 1 A 3 0 5 6 om3
1 6 1 A 3 0 3 0 om41 6 1 A 3 0 3 1 om41 6 1 A 3 0 3 2 om41 6 1 A 3 0 5 3 om41 6 1 A 3 0 3 4 om41 6 1 A 3 0 5 5 om41 6 1 A 3 0 5 6 om4
1 sc-duplex metal 468
12
8121624
1 x 1/31 x 1/22 x 1/32 x 1/2
1 6 1 A 3 0 6 0 1 6 1 A 3 0 7 1 1 6 1 A 3 0 6 2 1 6 1 A 3 0 7 3
1 6 1 A 3 0 6 5 om31 6 1 A 3 0 7 6 om31 6 1 A 3 0 6 7 om31 6 1 A 3 0 7 8 om3
1 6 1 A 3 0 6 5 om41 6 1 A 3 0 7 6 om41 6 1 A 3 0 6 7 om41 6 1 A 3 0 7 8 om4
2 mU-duplex-horizontal 647296
128144192
3 x 1/23 x 1/24 x 1/2
1 6 2 A 3 1 0 0 1 6 2 A 3 1 0 1 1 6 2 A 3 1 0 2
1 6 2 A 3 1 1 0 om31 6 2 A 3 1 1 1 om31 6 2 A 3 1 1 2 om3
1 6 2 A 3 1 1 0 om41 6 2 A 3 1 1 1 om41 6 2 A 3 1 1 2 om4
2 lc-duplex 323648
647296
4 x 1/33 x 1/2 (12)4 x 1/2 (12)
1 6 2 A 3 0 2 0 1 6 2 A 3 0 4 1 1 6 2 A 3 0 4 2
1 6 2 A 3 0 3 0 om31 6 2 A 3 0 5 1 om31 6 2 A 3 0 5 2 om3
1 6 2 A 3 0 3 0 om41 6 2 A 3 0 5 1 om41 6 2 A 3 0 5 2 om4
2 sc-duplex metal 161824
323648
4 x 1/33 x 1/24 x 1/2
1 6 2 A 3 0 5 0 1 6 2 A 3 0 8 1 1 6 2 A 3 0 8 2
1 6 2 A 3 0 7 0 om31 6 2 A 3 0 9 1 om31 6 2 A 3 0 9 2 om3
1 6 2 A 3 0 7 0 om41 6 2 A 3 0 9 1 om41 6 2 A 3 0 9 2 om4
3 mU-duplex-horizontal 144 288 6 x 1/2 1 6 3 A 3 1 0 0 1 6 3 A 3 1 1 0 om3 1 6 3 A 3 1 1 0 om4
3 lc-duplex 6472
128144
8 x 1/36 x 1/2 (12)
1 6 3 A 3 0 2 0 1 6 3 A 3 0 4 1
1 6 3 A 3 0 3 0 om31 6 3 A 3 0 5 1 om3
1 6 3 A 3 0 3 0 om41 6 3 A 3 0 5 1 om4
3 sc-duplex metal 3236
6472
8 x 1/3 6 x 1/2
1 6 3 A 3 0 6 0 1 6 3 A 3 0 8 1
1 6 3 A 3 0 7 0 om31 6 3 A 3 0 9 1 om3
1 6 3 A 3 0 7 0 om41 6 3 A 3 0 9 1 om4
further coupler types and numbers of fibers on request.
3
PAn
els
158 ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” sMap distriBution panel With Mtp® Modules
APPlIcAtIons• for installation in 19“ racks• to separate the 6 mtP® connector channels into
connectors of the patchfield, like e.g. lc-duplex.
ProPertIes• maximum of modularity and flexibility due to application
of specific combinable 1/2 and 1/3 part front plates• Very robust panel at low weight• light propagation ”uncrossed“ (straight) to maintain the
”channelwise cross“ (pairwise flip) of our mtP® trunk cables• with mtP® modules to attach Preconnect® fIber trunks
with mtP® connectors (12 fibers)• mtP® type in module back plane: 12 fibers;
guide-Pins: male (mtP® trunks are female by default) • 1 to 4 hU assembled with 1 hU 1/2 or 1/3 part front plates
(PfP) depending on the number of fibers and coupler type• matrix numbering of PfPs: channels within PfPs are
1 to n labeled, PfPs within the panel are numbered 1 to n with clips (e.g.: channel 3 – 4 means in PfP 3 channel 4)
• material and colour:• front: steel, powder coated rAl 9005 (black)• body: aluminium• back planes: steel, powder coated rAl 9005 (black)
delIVery form:• completely factory assembled incl. couplers
AccessorIes• Part front plates (PfP) see page 155• back plane parts see pages 160 / 161• labeling fields see page 176
mtP® is a registered trademark of Us-conec ltd.
standard back plane configurationfor max. 12 cable dividers per panel.
other back plane types see page 160 / 161.
300 mm
4 hU 176 mm
3 hU: 132 mm
2 hU: 88 mm
1 hU: 44 mm
19”: 483 mm
labeling fields
159ROSENBERGER OSI PRODUCT CATALOG
PAnels
3
PAn
els
Interfaces at module back plane have pins (male).
mtP® connectors of the Preconnect® mtP®trunks are without pins (female).
PArtnUmberssIngle comPonents
19“ sMap distriBution panel rAl 9005 (black)1 hU2 hU3 hU4 hU
1 6 1 A 0 0 0 11 6 2 A 0 0 0 11 6 3 A 0 0 0 11 6 4 A 0 0 0 1
on demand we deliver factory assembled panels with mtP® plug-in modules.
sMap Mtp® Modules (with 12 f mtP®), rAl 9005 (black)
nuMBer oF channels/
FiBerscoupler tYpe
nuMBer oF Mtp®s in Back
plane
FiBertYpe
sM os 2 oM3 oM4
12 ch / 24 F lc-duplex 2 mtP® 1 6 0 A 1 3 0 0 1 6 0 A 1 3 0 5 om3 1 6 0 A 1 3 0 5 om4
18 ch / 36 F lc-duplex 3 mtP® 1 6 0 A 1 3 0 1 1 6 0 A 1 3 0 6 om3 1 6 0 A 1 3 0 6 om4
24 ch / 48 F lc-Quad 4 mtP® 1 6 0 A 1 3 0 2 1 6 0 A 1 3 0 7 om3 1 6 0 A 1 3 0 7 om4
further coupler types and numbers of fibers on request. mtP® is a registered trademark of Us-conec ltd.
160 ROSENBERGER OSI PRODUCT CATALOG
PAnels
sMap panel accessories
PArtnUmbers
19“ 1 hu sMap Front-traY-plateempty, for assembling with PfPsas feedthrough front platerAl 9005 (black)
1 6 1 A 0 0 0 7
19“ 1 hu sMap traY eMptY With caBle Fixingfor assembling with PfPsas feedthrough panelrAl 9005 (black)
1 6 1 A 5 0 0 1
19“ 1 hu sMap Front laBeling stripesfor 1 to n numbering. set contains the plastic labeling field support, the number-stripes and the screws. Adding of own labeled stripes possible.
for 1/3 PfP front 1 to 24 (3 stripes) for 1/2 PfP front 1 to 24 (2 stripes)the labeling stripes do not fit at fronts with mU-duplex, sc-duplex and lc-Quad. other sets, e.g. 1 to 48 for 2 hU panel ect. on request
1 6 0 A 1 5 2 31 6 0 A 1 5 3 8
19“ 1 hu sMap panel Back plane blind, rAl 9005 (black)
1 6 0 A 1 5 0 1
19“ 1 hu sMap panel Back plane with 12 Preconnect® square interfaces,rAl 9005 (black)
1 6 0 A 1 5 0 2
19“ 1 hu sMap panel Back planewith 16 Preconnect® square interfaces, rAl 9005 (black)
1 6 0 A 1 5 0 3
19“ 1 hu sMap panel Back plane z-Bladewith 4 Preconnect® square interfaces,central cable routing,rAl 9005 (black)
1 6 0 A 1 5 1 2
19“ 1 hu sMap panel Back plane z-Blade with 4 Preconnect® square interfaces, cable routing sideways,rAl 9005 (black)
1 6 0 A 1 5 1 6
161ROSENBERGER OSI PRODUCT CATALOG
PAnels
3
PAn
els
PArtnUmbers
19“ 1 hu panel Back plane For coMBined Fo and copper caBling on the left Z-blade with 2 Preconnect® square interfaces, center cable routing on the right universal support of cables with cable ties,rAl 9005 (black)
1 6 0 A 1 5 1 5
19“ 1 hu panel Back plane For coMBined Fo and copper caBling on the left universal support of cables with cable ties,on the right Z-blade with 2 Preconnect® square interfaces, center cable routing,rAl 9005 (black)
1 6 0 A 1 5 1 7
19“ 1 hu panel Back plane For coMBined Fo and copper caBlingon the left Z-blade with 2 Preconnect® square interfaces, cable routing sideways, on the right universal support of cables with cable ties,rAl 9005 (black)
1 6 0 A 1 5 1 8
19“ 1 hu panel Back plane For coMBined Fo and copper caBling on the left universal support of cables with cable ties,on the right Z-blade with 2 Preconnect® square interfaces, cable routing sideways,rAl 9005 (black)
1 6 0 A 1 5 1 9
19“ 1 hu sMap panel Back plane for universal mounting of cables with cable ties,rAl 9005 (black)
1 6 0 A 1 5 0 7
19“ 1 hu sMap panel Back plane with 8 x Ø 29 mm holes suitable for Pg21 cable glands,rAl 9005 (black)
1 6 0 A 1 5 0 4
19“ 1 hu sMap panel Back plane For splice-panelswith 6 x Ø 29 mm holes suitable for Pg 21 cable glandsand support for 4 standard splice cassettes, with splice cassette cover,rAl 9005 (black)
1 6 0 A 1 5 0 5
19“ 1 hu sMap splice-cassette-Modulfor mounting (stacking) at ”panel back plane for splice panels“ in panels higher than 1 hU,capacity for 4 standard splice cassettes, without splice cassette cover,rAl 9005 (black)
1 6 0 A 1 5 0 6
162 ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” 6 hu distriBution Module panel
APPlIcAtIons• for installation in 19“ racks• Particularly appropriate for large data center infrastructures
ProPertIes• highly flexible panel due to its modular front plates and
back plane• suitable to accept all cables assembled by
rosenberger osI• for up to 288 channels (576 fibers)• torsion and strain resistant cable support for 12
Preconnect® trunk cable dividers (Z-blades)• cable routing slant backwards• Plug-in modules can be completely pulled out• Plug-in modules and part front plates can be mounted
tool-less• the module panel is a modular platform for different patch
field connectivity systems• matrix front labeling:
slots for plug-in modules and part front plates printed on module panel 1 to 16, each plug-in module and part front plate channel is numbered 1 to n (example: matrix 6 - 8 = module 6 - channel 8)
• standard light propagation of the plug-in modules:
”uncrossed“ (straight) to maintain the ”channelwise cross“ (pairwise flip) of our mtP® trunk cables
• mtP® within the plug-in modules are ”male“ (since trunks and patchcords are female)
• material and colour:• body: aluminium powder coated, rAl 7032 (pebblegrey)• front: steel powder coated, rAl 7035 (lightgrey) or
rAl 9005 (black)• weight:• module panel unassembled: approx.: 3.5 kg• Plug-in module: approx.: 0.5 kg
delIVery form• module panel with separate plug-in modules or part front
plates factory assembled or separate for on site mounting• mounting knobs in plug-in modules and part front plates
Part front plate (PfP)
optional patchcord guide
Plug-in module
mtP® is a registered trademark of Us-conec ltd.
module panel - 45° horizontal,with Z-blade back plane to accept 12 Preconnect® trunk cable dividers, similar to page 151
16 lc-duplex PfP
266
mm
6
hU
19” 483 mm
330 mm
163ROSENBERGER OSI PRODUCT CATALOG
PAnels
3
PAn
els
PArtnUmberssIngle comPonents
19“ 6 hu distriBution Module panel - 45° horizontalwith Z-blade back plane to accept 12 Preconnect® trunk cable dividers and remo-vable rear cover rAl 7032 (pebblegrey), front rAl 7035 (lightgrey) front rAl 9005 (black)
1 5 4 A 0 0 0 01 5 4 A 2 0 0 0
19“ 6 hu distriBution Module panel - 30° verticalwith foldaway rear cover and top and 30° downwards slant cable divider slots to accept up to 24 Preconnect® trunksrAl 9005 (black)
1 5 4 A 5 0 0 0
6 hu Blind part Front plate, rAl 7035 (lightgrey) rAl 9005 (black)
1 5 4 A 0 0 0 11 5 4 A 2 0 0 1
6 hu plug-in ModulerAl 7035 (lightgrey)
6 hu part Front plates rAl 7035 (lightgrey), assembled with couplers
nuMBer oF FiBers coupler tYpe sM os2 oM3 oM4 sM os2 oM3 oM4
12mU-duplex-horizontal
lc-duplex1 5 4 A 0 2 4 01 5 4 A 0 1 5 0
1 5 4 A 0 2 4 5 om31 5 4 A 0 1 5 5 om3
1 5 4 A 0 2 4 5 om41 5 4 A 0 1 5 5 om4
– –
– –
– –
24mU-duplex-horizontal
lc-duplex1 5 4 A 0 2 5 51 5 4 A 0 1 6 5
1 5 4 A 0 2 6 0 om31 5 4 A 0 1 7 0 om3
1 5 4 A 0 2 6 0 om41 5 4 A 0 1 7 0 om4
– –
– –
– –
32 lc-duplex – – – 1 5 4 A 0 4 7 0 1 5 4 A 0 4 7 2 om3 1 5 4 A 0 4 7 2 om4
36 mU-duplex-horizontal – – – 1 5 4 A 0 2 0 0 1 5 4 A 0 2 0 5 om3 1 5 4 A 0 2 0 5 om4
6 hu plug-in ModulerAl 9005 (black)
6 hu part Front plates rAl 9005 (black), assembled with couplers
nuMBer oF FiBers coupler tYpe sM os2 oM3 oM4 sM os2 oM3 oM4
12mU-duplex-horizontal
lc-duplex1 5 4 A 2 2 4 01 5 4 A 2 1 5 0
1 5 4 A 2 2 4 5 om31 5 4 A 2 1 5 5 om3
1 5 4 A 2 2 4 5 om41 5 4 A 2 1 5 5 om4
––
––
––
24mU-duplex-horizontal
lc-duplex1 5 4 A 2 2 5 51 5 4 A 2 1 6 5
1 5 4 A 2 2 6 0 om31 5 4 A 2 1 7 0 om3
1 5 4 A 2 2 6 0 om41 5 4 A 2 1 7 0 om4
––
––
––
32 lc-duplex – – – 1 5 4 A 2 4 7 0 1 5 4 A 2 4 7 2 om3 1 5 4 A 2 4 7 2 om4
36 mU-duplex-horizontal – – – 1 5 4 A 2 2 0 0 1 5 4 A 2 2 0 5 om3 1 5 4 A 2 2 0 5 om4
modUle PAnel - 30° vertical,downwards slant trunk routing on the rear side
ProPertIes - 30° VertIcAl• easy and time saving installation of Preconnect® cable
dividers in rear side square interfaces
• capacity up to 24 Preconnect® trunk cable dividers
• optimized cable routing within the rack due to 30° downwards
slant cable divider slots
• time saving installation and maintenance due to foldaway rear
cover and top
• connector legs are protected inside the panel
• no waste of space because the cable dividers are inside the panel
• well arranged cable routing inside the panel (256 single cables)
• modUle PAnel - 30° vertical is only available in black
164 ROSENBERGER OSI PRODUCT CATALOG
PAnels
APPlIcAtIons• box for the connection of a few fibers where no infrastruc-
ture like racks, wall cabinets or cable ducts exists• Particularly appropriate for industrial and outdoor cabling
as well as cabling in humid and wet rooms
ProPertIes• mini universal box available in two types:
1. dIstrIbUtIon PAnel• to mount factory assembled ready for connection cables
on patchfield within the box. Particularly suited to accept our factory assembled Preconnect® fIber cable
2. sPlIce PAnel• to splice pigtails on cables, with patchfield inside• to splice cable to cable
• suitable for on-wall mounting and placing in cable support systems
• max. possible fiber counts depend on type and connectivity system, standard types see next page
• 1 x cable inlet:• type 1 with 1 mounting bracket for Preconnect® trunk
and 1 x Pg 13.5 cable gland for other assembled cables, IP50 dust-proof
• type 2 with 1 x Pg 13.5 cable gland IP65 water-proof with round cable
• 2 x cable outlets:• type 1 and 2 with 2 x Pg 13.5 cable gland
for assembled cables, IP50 dust-proof• type 2 with 2 x Pg 13.5 cable gland IP65
water-proof with round cable• box itself is IP67 water-proof• dimensions (l x w x h): 200 x 120 x 75 mm• material and colour:
plastic, rAl 7035 (lightgrey)
oPtIonAl• for type 2:
factory assembled pigtails ready for splicing (laid in) inside panel and splice cassettes
delIVery form• type 1 and 2 with mounted couplers• All types including the glands listed in ”properties“
for cable inlets and outlets• type 2 including splice cassette, splice holder and splice
protectors, see page 174
AccessorIes• Pigtails see pages 134 / 135
type 2 type 1 with Preconnect® fIber trunk
Mini universal Box
165ROSENBERGER OSI PRODUCT CATALOG
PAnels
PArtnUmbers
FiBer count tYpe oF coupler
distriBution panelsplice panel
for splicing of pigtails
sM MM sM MM
4 sc » sc-duplex metal lc » lc-duplex sm
om3om4
e-2000™ » e-2000™ simplex1 hrl
1 1 4 A 0 4 2 01 1 4 A 0 4 2 4
––
1 1 4 A 0 4 2 8
1 1 4 A 0 5 2 0–
1 1 4 A 0 5 2 5 om31 1 4 A 0 5 2 5 om4
–
1 1 4 A 0 6 2 01 1 4 A 0 6 2 4
––
1 1 4 A 0 6 2 8
1 1 4 A 0 7 2 0–
1 1 4 A 0 7 2 5 om31 1 4 A 0 7 2 5 om4
–
8 sc » sc-duplex metal lc » lc-duplex sm
om3om4
e-2000™ » e-2000™ simplex1 hrl
1 1 4 A 0 4 6 01 1 4 A 0 4 6 4
––
1 1 4 A 0 4 6 8
1 1 4 A 0 5 6 0–
1 1 4 A 0 5 6 5 om31 1 4 A 0 5 6 5 om4
–
1 1 4 A 0 6 6 01 1 4 A 0 6 6 4
––
1 1 4 A 0 6 6 8
1 1 4 A 0 7 6 0–
1 1 4 A 0 7 6 5 om31 1 4 A 0 7 6 5 om4
–
12 lc » lc-duplex sm om3om4
1 1 4 A 0 4 8 1––
–1 1 4 A 0 5 8 2 om31 1 4 A 0 5 8 2 om4
1 1 4 A 0 6 8 1––
–1 1 4 A 0 7 8 2 om31 1 4 A 0 7 8 2 om4
further coupler types and fiber counts on request. 1 = typ r+m.
PArtnUmberssPlIce PAnels for splicing of cable to cable
nuMBer oF FiBers 2 4 6 8 12 16 24
1 1 4 A 0 8 0 0 1 1 4 A 0 8 0 1 1 1 4 A 0 8 0 2 1 1 4 A 0 8 0 3 1 1 4 A 0 8 0 4 1 1 4 A 0 8 0 5 1 1 4 A 0 8 0 6
further fiber counts on request.
3
PAn
els
166 ROSENBERGER OSI PRODUCT CATALOG
PAnels
universal Box
APPlIcAtIons• freely configurable and highly modular Universal box for
different installation environments, in which 19“ panels are not necessary or possible.
ProPertIes• for up to 24 channels (48 fibers)• Universal box available as distribution box and splice box:
1. dIstrIbUtIon boX• Assembled cables can be fed into the box and fixed on
both front walls and attached at the inner coupler plate2. sPlIce boX• optionally, buffered-fiber pigtails, cable pigtails or
pigtail-bundle-cables are available pre-assembled for splicing in the box
• to splice the pigtails on the cable, the cable has to be fed into the box and fixed on the front wall designated for that
• to attach the pigtails, assembled cables are fed into the box at the opposite side
• cables can be spliced directly to each other in the box too• modular mounting parts for the front walls to feed and fix
all kinds of cables into the box are available, see page 167• Universal box by default assembled with smAP ½ part front
plates with fo couplers
• material and colour:• box: plastic rAl 7035 light grey, impact-resistant,
halogen-free• front wall mounting parts: steel, powder coated
rAl 7035 light grey• dependent on the front wall mounting parts, the box can
be IP50 dust-proof up to IP66 water-proof• dimensions (l x w x h): 360 x 254 x 111 mm
oPtIonAl• smAP ½ part front plates for copper modules (jacks) can be
mounted on a special tray on request• coupler plates which can be mounted on the front walls
on request
delIVery form• on request, depends on type and configuration• with blind covers on not used square interfaces
AccessorIes• cable glands and nuts see page 177• blind-screws with nuts see page 177• factory assembled splice cassettes see pages 136 / 137• Pigtails see pages 134 / 135• raised floor-holder see page 167
167ROSENBERGER OSI PRODUCT CATALOG
PAnels
3
PAn
els
PArtnUmbersboXes
nuMBer oF channels/FiBers tYpe oF coupler
distriBution panel splice panel
sM oM3 sM oM3
6 ch / 12 F12 ch / 24 F24 ch / 48 F36 ch / 72 F48 ch / 96 F6 ch / 12 F
12 ch / 24 F24 ch / 48 F36 ch / 72 F48 ch / 96 F6 ch / 12 F
12 ch / 24 F6 x 6 ch / 6 x 12 F(with 12 f mtP®)
lc-duplexlc-duplexlc-duplex lc-duplex24 lc-Quad 48 lc-duplexmU-duplex-horizontalmU-duplex-horizontalmU-duplex-horizontalmU-duplex-horizontalmU-duplex-horizontalsc-duplex metalsc-duplex metalmtP®
1 1 8 A 4 0 0 1 1 1 8 A 4 0 0 21 1 8 A 4 0 0 31 1 8 A 4 0 0 41 1 8 A 4 0 0 91 1 8 A 4 0 1 11 1 8 A 4 0 1 21 1 8 A 4 0 1 31 1 8 A 4 0 1 41 1 8 A 4 0 1 51 1 8 A 4 0 2 11 1 8 A 4 0 2 21 1 8 A 4 0 2 5
1 1 8 A 4 0 0 5 om31 1 8 A 4 0 0 6 om3 1 1 8 A 4 0 0 7 om3 1 1 8 A 4 0 0 8 om3 1 1 8 A 4 0 1 0 om3 1 1 8 A 4 0 1 6 om3 1 1 8 A 4 0 1 7 om3 1 1 8 A 4 0 1 8 om3 1 1 8 A 4 0 1 9 om3 1 1 8 A 4 0 2 0 om3 1 1 8 A 4 0 2 3 om3 1 1 8 A 4 0 2 4 om3 1 1 8 A 4 0 2 6 om3
1 1 8 A 4 3 0 11 1 8 A 4 3 0 21 1 8 A 4 3 0 3
1
1
1 1 8 A 4 3 0 71 1 8 A 4 3 0 81 1 8 A 4 3 0 9
1
1
1 1 8 A 4 3 1 31 1 8 A 4 3 1 4
on request
1 1 8 A 4 3 0 4 om31 1 8 A 4 3 0 5 om31 1 8 A 4 3 0 6 om3
1
1
1 1 8 A 4 3 1 0 om31 1 8 A 4 3 1 1 om31 1 8 A 4 3 1 2 om3
1
1
1 1 8 A 4 3 1 5 om31 1 8 A 4 3 1 6 om3
on request
empty box without coupler plate and no splice cassette interface
1 1 8 A 4 0 0 0
further coupler types and numbers of fibers on request. 1 the maximum number of fibers in the splice panel is limited to 48 fibers, because higher numbers of fibers can not be spliced due to shortage of space in the box. mtP® is a registered trademark of Us-conec ltd.
PArtnUmbersmodUlAr moUntIng PArts
ip50 Without sealing
Blind plate plate For 4 x pg plate For 6 x pg plate For 4 x cable-divider
lip seal
1 1 8 A 4 5 0 04 x Pg 21
1 1 8 A 4 5 0 16 x Pg 13,5
1 1 8 A 4 5 0 2 6 x Pg 16
1 1 8 A 4 5 0 36 x Pg 21
1 1 8 A 4 5 0 4
1 1 8 A 4 5 0 5 1 1 8 A 4 5 0 6
ip66 With sealingraised Floor-holderfor mounting of our universal box in raised floors
0 9 9 A 0 0 5 11 1 8 A 4 5 0 7
4 x Pg 21 1 1 8 A 4 5 08
6 x Pg 13,5 1 1 8 A 4 5 0 9
6 x Pg 16 1 1 8 A 4 5 1 0
6 x Pg 21 1 1 8 A 4 5 1 1
168 ROSENBERGER OSI PRODUCT CATALOG
PAnels
distriBution Box outdoor
APPlIcAtIons• distribution box for structured cabling in outdoor
environment• wall and mast mounting for distribution of single
channels of a multifiber system
ProPertIes• IP67 water-proof• All lc variants (single- and multimode)
delIVery form• Inclusive screwed cover• Assembled cable glands, lc couplers and fixing flanges
AccessorIes• band clamps as fixing set
PArtnUmbers
nuMBer oF channels / FiBers
3 ch / 6 F 6 ch / 12 F
12 ch / 24 F18 ch / 36 F
slfdU003-03slfdU003-06slfdU005-12slfdU008-18
12 channel distribution box
6 channel distribution box
169ROSENBERGER OSI PRODUCT CATALOG
PAnels
excess FiBer caBle enclosure outdoor
3
PAn
els
APPlIcAtIons• enclosure for cable overlength storage in outdoor
environment• for wall mounting and in 19“ racks
ProPertIes• mechanical protection for stored cable overlength• eXcess fIber cAble enclosUre available in four variants:
1. 1 hU eXcess fIber cAble enclosUre with drawer function, suitable for approx. 30 m cable up to 7 mm diameter
• 2. 1 hU eXcess fIber cAble enclosUre without drawer function, suitable for approx. 30 m cable up to 7 mm diameter
• 3. 2 hU eXcess fIber cAble enclosUre without drawer function, suitable for approx. 50 m cable up to 7 mm diameter
• 4. eXcess fIber cAble enclosUre (19 x 41 cm) for wall and mast mounting, suitable for approx. 20 m cable up to 7 mm diameter
PArtnUmbers
variant
1 hU without drawer1 hU with drawer
slfcs001-000slfcs003-000
2 hU slfcs007-000
19 x 41 cm slfcs008-000
170 ROSENBERGER OSI PRODUCT CATALOG
PAnels
19“ 1 hu panel copper
19“ 1 hu sMap panel copper
APPlIcAtIons• for installation in 19“ racks• for distribution of Preconnect® coPPer trunks at
patchcords in data centers (not suitable for tor trunks)
ProPertIes• Particularly suitable to accept 24 Preconnect® coPPer
rJ45 jack modules cAt. 6A screened
APPlIcAtIons• for installation in 19“ racks• for distribution of Preconnect® coPPer trunks at
patchcords in data centers (not suitable for tor trunks)
ProPertIes• Assembled with two smAP 1/2 part front plates• suitable to accept 24 Preconnect® coPPer rJ45 jack mo-
dules cAt. 6A screened
PArtnUmbers
ral 7035 (lightgrey)ral 9005 (black)
8 0 0 A 0 2 0 08 0 0 A 0 2 0 1
PArtnUmber
ral 9005 (black) 1 6 1 A 5 0 0 2
• material and colour: steel, rAl 7035 (lightgrey), rAl 9005 (black)
oPtIonAl• other jack modules on request
AccessorIes• Panel accessories see pages 174 – 177
• material and colour: steel, rAl 9005 (black)
oPtIonAl• other jack modules on request
AccessorIes• smAP accessories see pages 160 / 161• Panel accessories see pages 174 – 177
171ROSENBERGER OSI PRODUCT CATALOG
PAnels
19” 1 hu distriBution panel copper tor
sMap distriBution panel FiBer / copper variant
3
PAn
els
APPlIcAtIons• for installation in 19“ racks• to interconnect Preconnect® coPPer trunks tor with
patchcords in data centers
ProPertIes• Particularly suitable to accept 24 Preconnect® coPPer
tor rJ45 jack modules cAt. 6A screened• material and colour: steel, rAl 9005 (black)• depth: 200 mm
PArtnUmber
ral 9005 (black) 8 0 0 A 0 2 0 4
oPtIonAl• Panel cover on request
AccessorIes• Panel accessories see pages 174 – 177
the modular smAP distribution panels and part front plates (see pages 154 / 155) can be combined with the part front plates of the smAP Panels copper (see page 170) to build hybrid fo / copper panels.
173ROSENBERGER OSI PRODUCT CATALOG
3PAnels And rAcKs: PAnel AccessorIes
even the protecting and cable routing compo-nents e.g. the strain relief, the patchfield protec-tion or cable managers have to pass intensive quality controls. for we know: the whole system will only work properly if the smallest detail will be taken care of.
rosenberger osI attaches greatest importance to meticulous manufacturing processes and the use of high quality material even down to the smallest components. to ensure the safety clas-ses of panels, the quality of accessories is very important, as already smallest material defects and mistakes during the machining process can affect the impermeability.
174 ROSENBERGER OSI PRODUCT CATALOG
PArtnUmbers
(1) splice cassette 1 1 1 A 0 0 0 8
(2) cover For splice cassette 1 1 1 A 0 0 1 5
(3) splice holder For 12 criMp splice protectors 1 1 1 A 0 0 0 0
(4) criMp splice protector 1 1 1 A 0 0 0 1
(5) tension relieF For 900 µm-BuFFered-FiBer 1 1 1 A 0 0 0 9
1
2
34
5
strain relieF for cable glandPg 13.5Pg 16Pg 21
1 1 1 A 0 4 2 01 1 1 A 0 4 2 11 1 1 A 0 4 2 2
divisiBle conduit – with glands Ø inside Ø outside
PAco-14b PAco-20b
12.9 mm19.8 mm
18.7 mm25.9 mm
0 9 9 A 0 2 0 10 9 9 A 0 2 0 2
divisiBle glandstn/gtn 1314 (Pg 13,5) suitable for conduit PAco-14b
incl. adapter ring and nut for Pg 21 hole 0 9 9 A 0 2 1 5
tn/gtn 2120 (Pg 21) suitable for conduit PAco-20bincl. Pg 21 nut 0 9 9 A 0 2 1 2
Front plate Blind coversfor cutout st
sc-duplexe-2000tm, sc-simplex, mt-rJ
1 1 1 A 0 0 1 31 1 1 A 0 0 1 41 1 1 A 0 0 1 6
19“ 1 hu patchcord overlength panelrAl 7035 (lightgrey)
1 1 1 A 0 7 0 1
PAnel AccessorIes
panel accessories
175ROSENBERGER OSI PRODUCT CATALOG
PAn
el A
cces
sorI
es
3
PAnel AccessorIes
panel accessories
PArtnUmbers
19“ 4 hu suBFloor holder rAl 9005 (black)robust fixture for very flexible, universal and easy installation of 19“ panels and active equipment in raised floors
0 9 9 A 0 0 5 2
19“ patchField protector · to prevent mechanical strain and damage· to prevent contaminationhighly recommended if 19“ patchfields are mounted on subfloor holders in raised floors.
19“ patchField protector1 hU2 hU3 hU4 hU
0 9 9 A 0 0 5 90 9 9 A 0 0 6 00 9 9 A 0 0 6 60 9 9 A 0 0 8 3
19“ 1 hu patchcord guide rAl 7035 (lightgrey)
1 1 1 A 0 4 5 0
19“ horizontal caBle Manager rAl 9005 (black)1 hU2 hU
1 1 1 A 0 4 5 41 1 1 A 0 4 5 3
176 ROSENBERGER OSI PRODUCT CATALOG
PAnel AccessorIes
panel accessories
PArtnUmberslAbelIng fIeld
suitable for all rosenberger osI panels and most of the commercially available panels, containing:•1labelingfield•Mountingmaterial•Assemblyinstruction
1 hU2 hU3 hU4 hU
1 6 1 A 0 0 0 21 6 2 A 0 0 0 21 6 3 A 0 0 0 21 6 4 A 0 0 0 2
PArtnUmbers1 hU PAtchcord gUIde
for guidance and fixation of patchcords per height unit 1 hU to both sides. the patchcord guide prevents too small bending radii – which could result in eleva-ted attenuation.set consisting of: right and left 1 hU patchcord guides with labeling fields, velcro stripes, m6 screws and cage nuts. fits into 600 mm wide cabinets.
for 1 hU panelsfor 2 hU panelsfor 3 hU panelsfor 4 hU panels
1 6 1 A 0 0 0 6 1 6 2 A 0 0 0 61 6 3 A 0 0 0 61 6 4 A 0 0 0 6
177ROSENBERGER OSI PRODUCT CATALOG
PAnel AccessorIes
PAn
el A
cces
sorI
es
3PArtnUmberscAble glAnds wIth Pg 21 AdAPterrIngs And nUts
for cable Ø
Pg 13.5 6 - 12 mm plastic IP60 1 1 1 A 0 4 0 0
Pg 16 10 - 14 mm plastic IP60 1 1 1 A 0 4 0 1
panel accessories
PArtnUmbersblInd-screws wIth nUts
Pg 13.5 plastic IP60 1 1 1 A 0 4 3 0
Pg 16 plastic IP60 1 1 1 A 0 4 3 1
Pg 21 plastic IP60 1 1 1 A 0 4 3 2
Pg 13.5 metal IP68 1 1 1 A 0 4 3 3
Pg 16 metal IP68 1 1 1 A 0 4 3 4
Pg 21 metal IP68 1 1 1 A 0 4 3 5
PArtnUmberscAble glAnds wIth nUts
for cable Ø
Pg 13.5 6 - 12 mm plastic IP60 1 1 1 A 0 4 2 6
Pg 16 10 - 14 mm plastic IP60 1 1 1 A 0 4 2 7
Pg 21 13 - 18 mm plastic IP60 1 1 1 A 0 4 0 2
Pg 13.5 6 - 12 mm metal IP68 1 1 1 A 0 4 2 8
Pg 16 10 - 14 mm metal IP68 1 1 1 A 0 4 2 9
Pg 21 13 - 18 mm metal IP68 1 1 1 A 0 4 1 0
179ROSENBERGER OSI PRODUCT CATALOG
3PAnels And rAcKs: rAcKs
based on the 19“ rack system ”netcell“ from apranet and in cooperation with our customers, we have combined the innovation of both com-panies to develop one modular and highly fle-xible infrastructure rack. due to its barrier-free cable managers – offering large space – and the best practise inovative components, this distri-bution rack does not only provide the means of proper cable management. today, it already meets the requirements a modern data center will face in the future.
due to the increasing complexity of data centers, the requirements regarding modern rack rows are increasing as well. besides a maxi-mum protection of the cable routings, a clearly arranged, easy to be installed and sophisticated cable management plays a more and more important role in infrastructure cabling. thus the same high quality levels apply for all rosenberger osI products.
180 ROSENBERGER OSI PRODUCT CATALOG
cable retainer, so called l-fingers, ensure ideal bending and kinking protection
many useful details and options to mount trunks and other cables perfectly at each place
patch location rack
rAcKs
optional: cable overlength storage and cable guides to be mounted on top of rack
cable manager with several perforated cable feed-through at both sides at the front and rear
overlength storage and cable guide at base of rack, optional
cable conduits at the rack sides to connect the front and rear cable manager
181ROSENBERGER OSI PRODUCT CATALOG
APPlIcAtIons• high density data center infrastructures• to build passive data center patch locations with
highest density
ProPertIes• Innovative barrier-free cable management system• no rack pillars that interfere with cable routing due to
cable managers being integrated into the pillars• covers of the cable managers are hinged in both direc-
tions and completely removable• several perforated feedthroughs in the side and rear
walls of the cable managers for easy cable routing in the vertical and horizontal way
• Professional routing of large cable volumes from patch-fields and storage of cable overlength inside the vertical cable managers
• Particularly suitable for fo cables due to cable retainers (l-fingers) and finger-slots• the rounded l-fingers ensure high bending and
kinking protection for the cables even under tensile load
• l-fingers do not have sharp edges and are very robust and break resistant
• cables can neither be squeezed nor kinked for there is enough space within the finger-slots
• during work with open or removed covers the l-fingers hold the cables back in the finger-slots
• dimensions (h x d x w): 213 (46 hU) x 90 x 90 cm• material and colour: steel, powder coated, rAl 9005 (black)
3
rAc
Ks
oPtIonAl• 19“ Intermediate-rack to build rack rows with an uneven
number of racks on request
delIVery form• factory mounted on a pallet (total-height with pallet and
packaging = 230 cm)• Incl. adjustable pedestals for on site mounting
AccessorIes• wide range of accessories like e.g. side walls, cable guides,
overlength storage for top of rack etc. on request
for more technical details and partnumbers please ask for our product information.
rAcKs
PArtnUmber
rAl 9005 (black) 1 4 2 A 3 0 0 0
184 ROSENBERGER OSI PRODUCT CATALOG
PArtnUmbers
inspection and cleaning kitVideo microscope with hand-held monitor 099 A 0388
Usb microscope 099 A 0389
inspection and cleaning kit
the kit includes all materials and tools for visual inspection and cleaning of fo connectors and adapters. the main com-ponent is a video backpanel microscope. It is available with a hand-held monitor or with a Usb interface, alternatively. the Usb version needs a laptop or Pc with Usb 2.0 port. that version comprises an additional feature compared to the
monitor version: the pictures can be saved for documentation. microscope adapters for Ø 1.25 mm and Ø 2.5 mm standard ferrules are included, additonal adaptions to all frequently used connector types are available as accessory. we are pleased to provide you with a detailed data sheet.
the software delivered with the Usb microscope allows to analyze the pictures in an automated way. scratches and conta-minations are marked in different colours and enable a reliable examination of ferrule endfaces. this ensures an inspection in conformity with Iec 61300-3-35.
AccessorIes
A large variety of adapters enables to inspect all standard connec-tors with the video microscope. connectors can also be inspected through panel mounted couplers.
screen shot of a ferrule endface
185ROSENBERGER OSI PRODUCT CATALOG
4
Acc
esso
rIes
PArtnUmbers
reel cleaner 0 9 9 A 0 0 2 5
replaceMent reel 0 9 9 A 0 0 2 6
reel cleanercleaning device with a dry textile ribbon for all fo connec-tors with the exception of mt-rJ male (with pins)• one textile reel included• Up to 400 cleanings per reel• dimensions (l x w x h): 127 x 83 x 48 mm• weight: approx.: 150 g
test laser ev-3
laser light source for defect location, fiber identification and testing of connectors, singlemode and multimode• with Ø 2.5 mm universal interface and adapter to Ø 1.25 mm• technical data sheet available on www.rosenberger-osi.com
PArtnUmber
test laser ev-3 0 9 9 A 0 3 3 2
click cleanerhandy cleaning tool for ferrule endfaces of fo connectors.• simple release of the cleaning mechanism by pushing the
tool holder• Unmating of the connector not necessary – cleaning
through the adapter is available• extendable nozzle for cleaning connectors, being difficult
accessible • length: approx.: 185 mm• weight: approx.: 25 g
PArtnUmbers
click cleaner, For Ferrules Ø 1.25 mm 0 9 9 A 0 3 9 0
click cleaner, For Ferrules Ø 2.5 mm 0 9 9 A 0 3 9 1
click cleaner, For rdc connectors 0 9 9 A 0 3 9 5
Mtp® / Mpo cleaner 0 9 9 A 0 0 5 5
AccessorIes
mtP® is a registered trademark of Us conec ltd.
186 ROSENBERGER OSI PRODUCT CATALOG
ProPertIes• All fiber types available• max. length: 1,000 m per fiber type• Available with all simplex and duplex connector types• IP50 dust-proof• take-up option for legs• Accessory box for consumables, e.g. measurement
adapters• box with shoulder strap
AccessorIes
otdr MeasureMent FiBer case
PArtnUmbers
FiBer tYpe FiBer length [m] connector reMark
sm 500 fc Pc » fc APc pre-assembled 081 A 0081
sm 1000 e-2000™ hrl » sc APc spliced pigtail 081 A 4075
sm 1000 sc » sc pre-assembled 081 A 0183
sm 1000 fc APc » e-2000™ hrl pre-assembled 081 A 0084
sm 1000 e-2000™ hrl » e-2000™ hrl pre-assembled 081 A 0261
om3 3 x 100 according to customer requirement with mode controller 081 A 0087
om4 3 x 100 according to customer requirement with mode controller 081 A 0088
type of launching fibers and connectors to be selected. multiple fibers per box are available. the listed part numbers refer to the most standard types. contact us in case of individual requirements.
confIgUrAtIon wIth modcon• mode controller and up to 3 measurement fibers in a
handy box• launching fibers with different connector interfaces
available• singlemode quality connectors on multimode fiber types
• AdVAntAges:• compact and clearly arranged measurement setup• Improved handling in mobile use• measurement setup in conformity with Iec 61280-4-1
standard with encircled flux launch conditions
• notes:• worn-out connectors have to be factory refurbished at
rosenberger osI• the connector type has to be chosen at time of order
modcon type for up to three measurement fibers
187ROSENBERGER OSI PRODUCT CATALOG
4
AccessorIes
asseMBlY tools
rosenberger osI provides all necessary tools for a professio-nal assembly of fo connectors. of course they are also availa-ble in small quantities.
Please contact us for further details regarding our assembly tools. we would be pleased to assist you.
Acc
esso
rIes
fActory Assembled VersIon• factory-assembled connectors according to your
requirements with connecting cables, length 2 m• factory-provided measurements: Insertion loss or otdr
measurement as requested• connector endfaces inspected by interferometer• singlemode versions: measurement of fiber core excentricity
• AdVAntAges:• documented quality of connectors in view to measure-
ment cable specification, like mentioned above• no splices within the launching fiber
• notes:• worn-out connectors have to be factory refurbished at
rosenberger osI• the connector type has to be chosen at time of order
sPlIced VersIon• measurement cable pigtails can be spliced on the fibers
according to the required setup• 2 m of fiber are stored in the splice cassette • measurement cable pigtails are not included and have to
be ordered separately; factory assembly is available on request
• two crimp splice protectors and one splice holder are included
• Attenuation measured by otdr, using a bare fiber adapter
• AdVAntAges:• flexible solution (as described above)• connector replacement possible on site
• notes:• the launching fiber includes the splices of the two
measurement cable pigtails – with good Il and rl values, this is not a real problem
factory assembled version with 4 different fiber types spliced version with one fiber
factory assembled version with one fiber
188 ROSENBERGER OSI PRODUCT CATALOG
AccessorIes
ProPertIes• reference cables with accurately specified connectors
enable measurements with a good repeatability• measurement cables are equipped with connectors of
particular low tolerances• connectors have a durable ceramic ferrule• singlemode: the limit of the fiber core excentricity is
0.3 µm, the apex-offset is specified with max. 30 µm
MeasureMent caBles
form of delIVery• with individual documentation• Patchcords up to a length of 6 m are shipped in a
durable bag with zip
to ensure the special tight tolerances, our measurement cables have to pass extensive test procedures, here the core excentricity instrument
189ROSENBERGER OSI PRODUCT CATALOG
AccessorIes
4
Acc
esso
rIes
PArtnUmbers
connector FiBer tYpe
lc
mU
sc
e-2000tm hrl
081 A 1430
081 A 1413
081 A 0143
081 A 1447
the chart shows the most standard types. we would be pleased to provide your individual configuration.
the excentricity instrument is used to test, if the fiber core is located exactly in the center of the ferrule. the specification allows a max. deviation of 0.3 µm. the measured sample shows a an excentricity of less than 0.25 µm.
the interferometer is used to measure the geometry of the ferrule endface. the results are displayed by different image-
guided methods. only low tolerances are allowed here, too.
190 ROSENBERGER OSI PRODUCT CATALOG
8° contActAreA
technIcAl termsonly a few like them, everybody needs them: technical terminology is essential for precise communication. we have prepared a little compendium about fiber optic technology for you.
PAge 192
worth KnowIng:here yoU wIll QUIcKly fInd yoUr wAy.
technIcAl terms, contents And PersonAl contAct.
191ROSENBERGER OSI PRODUCT CATALOG
sUbJect IndeXhow to find all about sc connectors? where to find duplex patchcords? this index helps you to find specific products and descriptions. PAge 196
PersonAl contActrosenberger osI is not only located all over germany by subsidiaries but also represented in whole europe by sales agencies. the network of our parent company rosenberger also allows a global support.
PAge 198
192 ROSENBERGER OSI PRODUCT CATALOG
AbsorPtIonloss of radiation while passing a medium; a part of the radiant energy is transferred e.g. into thermal energy.
APc Angled polished contact, see hrl.
AttenUAtIonratio of power reduction in a transmission medium, e.g. caused in an optical cable, link or component. reasons for optical attenuation are scattering and absorption in connectors, splices and fibers. often, the attenuation is indicated in decIbel [db].
bAcKscAtterIng technIQUetechnology which analyses the backscattered light of pulses to characterize a fiber link.
bAndwIdththe difference between upper and lower cutoff frequency; in an optical fiber, it is an indicator for the maximum pos-sible data rate.
bAndwIdth-dIstAnce-ProdUctcharacteristic parameter of an optical fiber, usually ex-pressed in mhz x km.
bend InsensItIVe fIberfiber types allowing small bending radii of a cable without causing a significant increase in loss.
cAble coreAll inner components of a cable, including fillers and strain relief. It may include a wrapping layer.
cAble JAcKetouter layer of a cable for protection from environmental influences.
cAtV (commUnIty AntennA teleVIsIon)tV reception of many users over one antenna.
center elementelement in the center of a cable design, often used as a strength member or filler.
clAddIngouter layer of the glass material of an optical fiber. Its re-fractive index is lower than the index of the core material. for fiber identification, the diameter of core and cladding are imprinted, e.g. 50/125 µm.
coAtIngfirst protection layer on an optical fiber. It protects the glass from humidity and mechanical influences.
connectorelement to achieve a temporary interconnection of one or more fibers. either a male and a female connector are joined or two connectors of the same or different type are mated in an adapter.
core of A fIberUsually, an optical fiber at least constists of a core sur-rounded by a cladding. typically, the core material has a higher refractive index as the cladding. total reflexion keeps the propagating light inside the core. for fiber description, the diameter of core and cladding are imprin-ted, e.g. 50/125 µm.
core glAssmaterial of the core of a fiber – see core of a fiber.
coUPlerAlso power divider: a passive optical device which divides optical power into several fiber paths.
crImPIngmethod of attaching a cable strain relief to a connector. cable elements are fixed by deforming a metal sleeve to a defined shape.
decIbel [db]logarithmic notation of the ratio of a physical quantity relative to a specified or reference level. It is often used to indicate the attenuation of optical components: a [db]= -10 x log(powerout/powerin)
dIn (deutsches Institut für normung) german office for standardisation.
dIsPersIonIn an optical conductor, the velocity of light depends on its frequency, propagation mode or polarisation. these effects cause a widening of signal pulses and limit trans-mission length and data rate.
technical terMs
A
b
c
d
193ROSENBERGER OSI PRODUCT CATALOG
doPIngby adding small amounts of special substances, the refractive index of glass can be controlled.
electromAgnetIc wAVe Propagating wave which consists of an electric and a magnetic field component. radio waves, X-rays and light are electromagnetic waves. they only differ in the wave-length.
emc (electromagnetic compability)branch of electrical engineering to study and control electromagnetic interference.
ferrUlePart of an optical connector which is used to fix and to align a fiber. typical ferrules are made of zirconia ceramic or precision mold plastic material.
fIbertransmission medium, consisting of a glass core and a cladding. signal light can propagate through the core material over long distances. fibers are protected by several layers and built into cables.
fIber oPtIcstechnology which uses optical fibers for data transmission. In addition, the technology is also used for energy trans-mission, e.g. laser light for material machining.
fIber chAnnel (fc)network technology for storage networks with gigabit capability. It comes with its own protocol and uses twisted copper wires or optical fibers as transmission medium.
fItl (fiber in the loop)fiber in a municipal network. According to the endpoint of the fiber, it is distinguished between:
fttb - fiber to the buildingfttc - fiber to the curb ftth - fiber to the homefttP - fiber to the pedestal
fttd (fiber to the desk)structured fiber cabling in a building (lAn) with fiberpath to the workplace.
gbe (gigabit ethernet)computer networking technology with gigabit capability. the term describes various technologies to transport ethernet frames over a wired infrastructure. they are defined by the Ieee 802.3 standards.
grAded IndeX fIber type of an optical fiber. the refraction index of the core has a parabolic profile. this causes a continuous refraction of the propagating light and limits the dispersion.
grAded IndeX ProfIlegradient of the refraction index. In a typical graded index fiber, the refraction index of the core decreases from the center by a parabolic function - see graded index fiber.
grP element (glass reinforded plastic element)component of a fiber optical cable. It supports the fiber and absorbs bend and tensile forces.
hcs fIber (hard cladded silica fiber)fiber type with a core of quartz glass and a cladding made of plastic material. It is also called Pcf (polymer cladded fiber).
hrl (high return loss)term which characterizes low reflective interconnections, also used for connectors with APc ferrule technology. Using angled polished fiber endfaces, reflected light is not propagated in the fiber core. distortion by reflected light is highly reduced.
hybrId AdAPtercomponent for connecting different connector interfaces.
Iec (International electrotechnical commission)non-profit international organisation with headquarter in geneva, switzerland. Iec committees work on international electrical standards.
Ieee (Institute of electrical and electronic engineers)A non-profit professional association, organizing expert conferences and publishing professional journals. the Ieee also forms committees for standardisation. well known are the Ieee 802 ethernet standards.
InfInIbAndcommunication technology which uses copper or fiber optic cabling technology. It allows to bundle several com-munication channels to one link. typical is an application using four channels in parallel (8 fibers).
f
h
I
g
e
194 ROSENBERGER OSI PRODUCT CATALOG
technical terMs
Indoor cAblecable designed for installation inside buildings.
InsertIon losssee AttenUAtIon
InterferometerPrecision instrument which uses a technology of superim-posing waves. In the fiber optic technology, it is used to characterize the geometry of ferrules or fiber endfaces.
Isdn (Integrated services digital network)communication standard for simultaneous digital transmission of several services like voice, video, data etc.
lAn (local Area network)data network covering local areas like buildings or offices.
lIghtVisible electromagnetic waves with a wavelength between 380 nm (violet) and 780 nm (red) or adjacent ranges like ultravioett (UV) or infrared (Ir) light. for data transmission, typically Ir light with a wavelength between 850 nm and 1550 nm is used.
loose bUffer fIbertubing which contains a loose bundle of fibers in a stress-less way. It can be with or without a gel filling.
loose tUbeoptical fiber protected by a loose tubing.
mAn (metropolitan Area network) computer network covering city or large campus areas.
mIcrobendIngsmall geometrical imperfections at the boundary between core and cladding of an optical fiber. microbending creates higher order modes which have a higher attenuation.
modeParticular electromagnetic field pattern of a wave propa-gating in a medium. different modes in an optical fiber propagate with different speed.
mtP® connectorfiber optic connector according to the mPo standard. It supports 12, 24, 48 or 72 fibers. mtP® is a registered trade-mark of Us conec ltd.
mUltI JUmPerPreconnect® fIber or coPPer trunk cables for multi-channel point-to-point interconnections for indoor appli-cations.
mUltImode fIberfiber type which allows the propagation of several light modes.
oUtdoor cAblecable material which is suitable for outdoor installation, e.g. in ducts or cable trays.
oPtIcAl fIberdielectric transparent fiber, produced of glass or plastic material. light coupled into the fiber is propagated and thus enables the transmission of data or energy (laser light).
oPtIcAl wAVegUIdesee optical fiber.
oPtIcAl wIndowtypical optical fibers have a minimum in attenuation at wavelengths of 850, 1300, 1550 and 1625 nm. these fre-quency ranges allow transmission over longer distances and are called optical windows.
otdr (optical time division reflectometer)Instrument which utilises the reflection pattern of optical pulses to measure the characteristics of a fiber link.
PArAllel oPtIc lInKtechnology used for high data rates over short distances. data (bytes, nibbles) is split into bits and transmitted si-multaneously over individual fibers.
PAtchcordshort cable to manage interconnections on a distribution panel.
PhysIcAl contAct (Pc)spherical polish for ferrules to ensure fiber contact without gap.
PIgtAIlcable or fiber assembly with a connector at only one end.
Pon (Passive optical network)Passive optical network for fItl including only fiber links and passive components like splitters, couplers or connectors.
l
m
o
P
195ROSENBERGER OSI PRODUCT CATALOG
Preconnect®brand of the customized fiber optical cabling system by rosenberger osI.
reflectIonchange in direction of a wavefront. light is reflected when it passes the interface of 2 media with different refraction index. In fiber optic technology, usually reflexions in inter-connections should be avoided, because they can cause signal noise.
refrActIonchange in direction of an optical beam/wave due to a change of the optical density in a medium.
refrActIVe IndeXcharacteristic of an optical medium which describes its optical density. the speed of light in a medium is calculated by dividing the speed of light in vacuum by the refractive index.
retUrn lossloss of signal power resulting from reflections. the rl is defined as the ratio between launched power to reflected power and usually noted in decIbel. transmission systems are designed to have a high return loss.
rIbbon cAblemulti-fiber cable with multiple fibers running parallel. these cables have typically a flat design.
sAn (storage Area network)network in a data center.
semI tIght tUbe fIberfiber embedded in a thin tubing.
sInglemode fIberfiber type which allows the propagation of one mode only. Usual dimension is 9/125 µm. singlemode fibers cause less dispersion than multimode types and therefore can be used for higher data rates and longer distances.
sPlIcePermanent connection of a fiber, made by fusing or by the use of an adhesive.
sPlItter (also power splitter)Passive component to divide optical power from one fiber to several fibers – see coupler.
steP IndeX fIbermultimode fiber with a homogeneous refractive index of the core. these types are typically used for short distances or for transmission of laser energy.
strength memberelement in a cable material which absorbs bending mo-ment and/or tensile force.
tIght tUbe fIberfiber with a coating, tight embedded in a plastic material.
tIme dIVIsIon mUltIPleXmethod to combine multiple signals into one serial data stream.
UnIt of heIght19-Inch rack systems normally use panels with a height of 44.45 mm [1.75”] or a multiple of that unit.
wAn (wide Area network)data transmission network covering large distances.
wAVelengthspatial period of a wave. Visible light has a wavelength between 380 and 780 nm in vacuum. In the fiber optic technology, light with a wavelength of the optical win-dows is used for data transmission.
wAVelength dIVIsIon mUltIPleX (wdm)several data streams are transported over one fiber by assigning different signal wavelengths. dependent on the number of signals launched into one fiber, the method is called coarse wavelength division multiplex (cwdm) or dense wavelength division multiplex (dwdm).
s
t
U
w
r
196 ROSENBERGER OSI PRODUCT CATALOG
Accessories Panel, p. 174-177 Preconnect® fIber, p. 118 f. smAP Panel, p. 160 f. Adapter, p. 62, 64, 66, 68-73, 74 f. APc (technology), p. 53 Application fields, p. 14-31 Assembly tools, p. 187
beam expansion, p. 52 blind part front plate, p. 151, 153, 155, 163, 167 blind screws, p. 177 breakout cable, p. 102 f., 112-115 broadcast, p. 24-27
cable divider, p. 41, 49 cable glands, p. 177 cable manager, p. 175, 180 f. cable type A-dQ(Zn)b2y, p. 97 I-b(Zn)bh, p. 95, 99 U-dQ(Zn)bh, p. 96, 100 f. cleaner, p. 185 comparison matrix, p. 101 conduit, p. 174 connectors, p. 61-80 contact, p. 198 f. coupler bracket, p. 118
data center, p. 16-19 dcX-cabling, p. 51 dIn (lsA), p. 73 dIn contact, p. 77 direct Attach long link cable, p. 107 direct Attach short link cable, p. 107 distribution module panel 3 hU, p. 150 f. 6 hU, p. 162 f. distribution panel 1 hU and 2 hU, p. 142-145 coPPer tor, p. 171 fIber/coPPer variant, p. 171 outdoor, p. 168 f. smAP, p. 154 f., smAP with mtP® modules, p. 158 f.
e-2000™, p. 68 efficiency cable, p. 95, 99 engineering, p. 38 f. escon®, p. 89
excess fiber cable enclosure outdoor, p. 169 excess fiber cable enclosure, p. 169 expanded beam contact #5, p. 78 expanded beam contact #12, p. 79 expanded beam contact, p. 52, 78 f.
factory assembled splice cassettes, p. 136 f. fc, p. 71 fddI, p. 89 fiber accessories, p. 118 fiber trunk, p. 94-101, 108 f., 110 f. fo-trunk, p. 94-101, 108 f., 110 f. f-smA, p. 89 fttA, p. 20-23, 110-117, 168 f.
harnesses, p. 104 f., 107 heavy duty 1000, p. 85 heavy duty 600, p. 84 heavy duty sc-rJ, p. 89 heavy duty, p. 27, 29 ff., 53, 84 f., 108 hybrid interfaces, p. 84 f.
Indoor cable, p. 95, 99 Industrial, p. 28-31 Infiniband™, p. 106 f. Inspection and cleaning kit, p. 184 Installation tube Indoor, p. 94, 98, 102, 106 Installation tube outdoor, p. 94, 108 f., 110, 112, 114 Installation, p. 41
Jack modules, p. 122-125
labeling fields, p. 144 f., 148 f., 160, 176 laser connect 100, p. 86 f. laser connect high Power, p. 54 f., 88 launching box, p. 186 f. lc, p. 62 f. logistics, p. 39 lsA (dIn), p. 73 lsh (e-2000™), p. 68
made by rosenberger, p. 89 maintenance, p. 42 measurement fiber box, p. 186 f. migration harness, p. 107 mini breakout cable, p. 103 mini contact, p. 76 mini universal box, p. 164 f. mining, p. 28-31 mobile communication, p. 20-23, 110-117, 168 f.
suBJect index
A
m
b
f
I
J
c
d
e
mtP® is a registered trademark of Us-conec ltd. e-2000™ is a registered trademark of diamond s.A.
h
l
197ROSENBERGER OSI PRODUCT CATALOG
mobile trunk, p. 26, 31, 108 f. mtP® divider cables, p. 104 f. mtP® modules, p. 159 mtP®/mPo, p. 69 mt-rJ, p. 70 mU, p. 64 f.
optical contact #16, p. 80 f. optical contacts, p. 76-81 otdr-measurement fiber box, p. 186 f. outdoor cable, p. 97, 100-117
Panel accessories, p. 173-177 Panel back plane, p. 151, 160 f., 163 Panel coPPer smAP, p. 170 Panel coPPer, p. 170 Panels, p. 141-171 Parallel optics, p. 106 f. Part front plates, p. 151, 153, 155, 163 Patchcord guide, p. 175 Patchcord overlength panel, p. 174 Patchcords coPPer, p. 122 f., 125, 133 Patchcords fIber, p. 128-132 Patchfield protector, p. 175 Pigtails, p. 134 Planning, p. 36 Plug-in modules, p. 153, 159, 163 Preconnect® cable dividers, p. 41, 49 Preconnect® (technology), p. 48 ff. Preconnect® coPPer trunk multi Jumper, p. 123 Preconnect® coPPer trunk tor, p. 124 f. Preconnect® coPPer trunk, p. 122 Preconnect® coPPer, p. 121-125 Preconnect® fIber accessories, p. 118 f. Preconnect® fIber breakout outdoor, p. 112 f., 114 f. Preconnect® fIber breakout, p. 102 f. Preconnect® fIber cablebundle outdoor, p. 116 Preconnect® fIber distribution station outdoor, p. 117 Preconnect® fIber mtP®-divider cables, p. 104 f. Preconnect® fIber trunk mobile, p. 26, 31, 108 f. Preconnect® fIber trunk multi Jumper, p. 98-101 Preconnect® fIber trunk outdoor, p. 110 f. Preconnect® fIber trunk, p. 94-97 Preconnect® fIber, p. 93-119 Products in detail overview, p. 58 f. Products, p. 62-189 Project management, p. 41
Quality signet, p. 89
rack, p. 180 f. raisedfloor-holder, p. 167, 175 rdc (rosenberger duplex connector), p. 82 reel cleaner, p. 185 rJ45 connector, p. 125 rJ45 jack modules, p. 122 f., 125 router-cabling, p. 51 rQc (rosenberger Quad connector), p. 83
sc, p. 66 f. screwing, p. 177 services, p. 32-43 smAP accessories, p. 160 f. spherical lens, p. 55 splice cassettes, p. 136 f. splice module panel, p. 152 f. splice panel 1 hU and 2 hU, p. 146-149 smAP, p. 156 f. st, p. 72 strain relief, p. 174 support, p. 42 switch-cabling, p. 51
technical terms, p. 192-195 technology, p. 44-55 telecommunication, p. 20-23 test laser, p. 185 tools, p. 187 trunk cable divider holder, p. 118 trunk, p. 18 f., 23, 26, 31, 48 f., 94-101, 108 f., 110 f., 122-125
Universal box, p. 166 f. Universal cable, p. 96, 100 f. Universal-coupler bracket, p. 118
o
Q
r
s
t
U
mtP® is a registered trademark of Us-conec ltd.
P
198 ROSENBERGER OSI PRODUCT CATALOG
frAnce
cdbl consultant mr. claude deubel 3 rue du lys d‘or · f-94370 sucy en brie
Phone: +33 (0) 172 50 10 - 81
PersonAl contAct
heAdQUArters
germAn sAles offIces
rePresentAtIVes
west
germAny
UsA netherlAnds / belgIUm
centrAl
north-eAst
soUth-west
rosenberger-osI gmbh & co. ohg endorferstr. 6 · d - 86167 Augsburg
Phone: +49 (0) 821 - 2 49 24 - 0 fax: +49 (0) 821 - 2 49 24 - 29
[email protected] www.rosenberger-osi.de
Am ravelin 14 · d-48653 coesfeld
Phone: +49 (0) 25 41 - 84 63 - 60 fax: +49 (0) 25 41 - 84 63 - 61
ItAly
mr. sergio terraneo Via leopardi 3 · I-22060 cabiate
Phone: +39 3176 8245
m.A.c. consulting
mrs. martina carlson 19271 lookout lane huntington beach, cA 92646
Phone: +1 714 625 8321
mr. Ab Vingerling noordhavenpoort 40 nl-2152 hb nieuw Vennep
Phone: +31 252 625 311
stormstr. 22 · d-63110 rodgau / nieder-roden
Phone: +49 (0) 61 06 - 82 69 - 44 fax: +49 (0) 61 06 - 82 69 - 46
rosenberger hochfrequenztechnik gmbh & co. Kg hauptstraße 1 · d-83413 fridolfing
Phone: +49 (0) 8684 - 18 - 0 fax: +49 (0) 8684 - 18 - 499
[email protected] www.rosenberger.com
straße 69 nr. 16 A · d-13125 berlin – Karow
Phone: +49 (0) 30 - 94 51 84 55 fax: +49 (0) 30 - 94 51 84 56
Pfaffenweg 15 · d-70180 stuttgart
Phone: +49 (0) 711 - 62 00 72 - 78 fax: +49 (0) 711 - 62 00 72 - 79
swItZerlAnd
leo solutions Ag mr. leo Vetsch rüti-tobel 1072 · ch-9053 teufen
Phone: +41 71 - 333 23 80
soUth
endorferstr. 6 · d - 86167 Augsburg
Phone: +49 (0) 821 - 2 49 24 - 57 fax: +49 (0) 821 - 2 49 24 - 29
sales oFFices and representatives national and international
199ROSENBERGER OSI PRODUCT CATALOG
ItAly
rosenberger hochfrequenztechnik gmbh & co. Kg sales office milano Via brodolini, 31 · I-20049 concorezzo - mb
Phone: +39 - 039 - 96 30306 fax: +39 - 039 - 59 68439
InternAtIonAl
sPAIn
rosenberger telecom, s.A. ed olimpia n18 · P.I. Ventorro del cano calle lozoya, 2. · e-28925 Alcorcón / madrid
Phone: +34 - 91 - 3 52 83 52 fax: +34 - 91 - 3 52 98 13
[email protected] www.rosenberger.es
sweden
rosenberger sverige Ab Vallgatan 5b · s-17067 solna
Phone: +46 - 8 - 6 36 26 00 fax: +46 - 8 - 6 36 26 26
[email protected] www.rosenberger.se
AUstrIA
walter Krenn hochfrequenztechnik gmbh simmeringer hauptstraße 421 A-1110 wien
Phone: +43-1- 7 48 71 17 - 0 fax: +43-1- 7 48 71 17 - 90
[email protected] www.krenn.at
brAZIl
rosenberger domex telecom cabletech Avenue, 601 · guaramirim ceP 12295-230 · cacapava - sao Paulo
Phone: +55 - 12 - 3221 8500 fax: +55 - 12 - 3221 8543
[email protected] www.rosenbergerdomex.com.br
chInA
rosenberger Asia Pacific electronic co. ltd. no. 3, Anxiang road, block b tianzhu Airport Industrial Zone beijing 101300 · Pr china
Phone: +86 - 10 - 8048 1995 fax: +86 - 10 - 8048 2438
[email protected] www.rosenberger.com.cn
UnIted KIngdom
rosenberger micro-coax ltd. 2b mercury house · calleva Park Aldermaston · gb-berkshire rg7 8Pn
Phone: +44 -1- 18 - 9 81 00 23 fax: +44 -1- 18 - 9 81 61 80
[email protected] www.rmcoax.com
UsA
rosenberger site solution, llc. 102 dupont drive UsA - lake charles, lA 70607
Phone: +1 - 337 - 598 52 50 fax: +1 - 337 - 598 52 90
[email protected] www.rlss.us
denmArK
rosenberger danmark A/s blokken 38 · box 92 dK-3460 birkerod
Phone: +45 45 82 12 94 fax: +45 45 82 13 95
[email protected] www.rosenberger.dk
IndIA
rosenberger electronic co. (India) Pvt limited Plot no. 263, sector 6 Imt manesar, gurgaon · haryana-122050
Phone: +91 - 124 - 477 55 00 fax: +91 - 124 - 477 55 01
All information contained herein is to be reliable as of the date of publication, but is subject to change without notice.
iMprint
200
text, design: penguin, lübeck
Print: de Vega medien gmbh, Augsburg
Image sources:technical product photography: Angelika waschke, daiting
Image and application photography: André walther, Peine penguin, various image agencies
Images on pages 28 / 29 and 30 / 31 (center): courtesy of rAg deutsche steinkohle
every care has been taken to compile all technical information. however, as errors cannot be excluded, please note that we cannot guarantee or accept liability for any consequences due to incorrect information.
501-01-09-12
we reserve the right to make technical changes at any time.
© rosenberger osI gmbh & co. ohg