Wavecor High-End China Speaker Manufacturer · 2018-10-13 · Wavecor High-End China Speaker...

1
Voice Coil 200 7 1 The Audio Technology Authority Wavecor High-End China Speaker Manufacturer By Vance Dickason Wavecor Ltd. is a Chinese limited company established in 2005 and is majority owned by a group of experienced Danish engineers and managers, which includes Alan Isaksen. The company, located in GuangDong province just north of Hong Kong (Photo 1), sells drivers and turnkey systems to both 1 1 the OEM and DIY markets. The current catalog of drivers includes four tweeters, four 5.25˝ midbass, four 6.5 ˝ ˝ ˝ midbass, ˝ ˝ and one 7˝ subwoofer. Here are some of the characterisitics of ˝ ˝ each category: Tweeters—all four tweeters ( s s Photo 2) consist of 1 2 2 ˝ silk ˝ ˝ domes, dual neo slug motors, voice coils wound with copper clad aluminum wire, heatsink, 1kHz resonance, 4Ω imped- ance, and a 94dB/2.83V SPL. You can purchase this model with and without a faceplate and with or without magnetic fluid. 5.25˝ Midbass ˝ ˝ —like the tweeters, these four drivers s s (Photo 3) share common features. Two versions use a cast 3 3 aluminum frame and two use steel baskets, two use fer- rite magnets and two use dual neodymium magnets with heatsinks. All four use 1.25˝ diameter 4 ˝ ˝ Ω voice coils wound with copper clad aluminum wire on black glass fiber formers (Xmax 3-3.5mm) and paper cones. 6.5˝ Midbass ˝ ˝ —Two versions use a cast aluminum frame s s and two use steel baskets, two use ferrite magnets and two use dual neodymium magnets with heatsinks. All four use 1.25˝ diameter 4Ω voice coils wound with copper clad aluminum wire on black glass fiber formers (Xmax 3-3.5mm) and paper cones. 7˝ Subwoofer ˝ ˝ —this driver ( r r Photo 4) uses a rigid alumi- 4 4 num cone, stamped frame, vented black glass fiber 1.5˝ diam- ˝ ˝ eter former with a four layer winding, aluminum shorting ring, vented frame below the spider mounting shelf, Nomex spider (damper), and gold terminals. For more on this new Denmark/China OEM speaker company, visit www.wavecor.com. PHOTO 1: Wavecor China factory. PHOTO 2: Wavecor TW030 neo tweeter. PHOTO 3: Wavecor 5.25˝ WF132TU woofer. PHOTO 4: Wavecor 7˝ SW178 subwoofer. Article from the February '07 issue of Voice Coil

Transcript of Wavecor High-End China Speaker Manufacturer · 2018-10-13 · Wavecor High-End China Speaker...

Page 1: Wavecor High-End China Speaker Manufacturer · 2018-10-13 · Wavecor High-End China Speaker Manufacturer By Vance Dickason Wavecor Ltd. is a Chinese limited company established in

Voice Coil 2007 1

The Audio TechnologyAuthority

Wavecor High-End China Speaker ManufacturerBy Vance Dickason

Wavecor Ltd. is a Chinese limited company established in 2005 and is majority owned by a group of experienced Danish engineers and managers, which includes Alan Isaksen. The company, located in GuangDong province just north of Hong Kong (Photo 1), sells drivers and turnkey systems to both Photo 1), sells drivers and turnkey systems to both Photo 1the OEM and DIY markets. The current catalog of drivers includes four tweeters, four 5.25˝ midbass, four 6.5˝ midbass, four 6.5˝ ˝ midbass, ˝ midbass, ˝and one 7˝ subwoofer. Here are some of the characterisitics of ˝ subwoofer. Here are some of the characterisitics of ˝each category:

Tweeters—all four tweeters (Tweeters—all four tweeters (Tweeters Photo 2) consist of 1Photo 2) consist of 1Photo 2 ˝ silk ˝ silk ˝domes, dual neo slug motors, voice coils wound with copper clad aluminum wire, heatsink, 1kHz resonance, 4Ω imped-ance, and a 94dB/2.83V SPL. You can purchase this model with and without a faceplate and with or without magnetic fluid.

5.25˝ Midbass˝ Midbass˝ —like the tweeters, these four drivers Midbass—like the tweeters, these four drivers Midbass(Photo 3) share common features. Two versions use a cast Photo 3) share common features. Two versions use a cast Photo 3aluminum frame and two use steel baskets, two use fer-rite magnets and two use dual neodymium magnets with heatsinks. All four use 1.25˝ diameter 4˝ diameter 4˝ Ω voice coils wound with copper clad aluminum wire on black glass fiber formers (Xmax 3-3.5mm) and paper cones.

6.5˝ Midbass˝ Midbass˝ —Two versions use a cast aluminum frame Midbass—Two versions use a cast aluminum frame Midbassand two use steel baskets, two use ferrite magnets and two use dual neodymium magnets with heatsinks. All four use 1.25˝diameter 4Ω voice coils wound with copper clad aluminum wire on black glass fiber formers (Xmax 3-3.5mm) and paper cones.

7˝ Subwoofer˝ Subwoofer˝ —this driver ( Subwoofer—this driver ( Subwoofer Photo 4) uses a rigid alumi-Photo 4) uses a rigid alumi-Photo 4num cone, stamped frame, vented black glass fiber 1.5˝ diam-˝ diam-˝eter former with a four layer winding, aluminum shorting ring, vented frame below the spider mounting shelf, Nomex spider (damper), and gold terminals.

For more on this new Denmark/China OEM speaker company, visit www.wavecor.com.

PHOTO 1: Wavecor China factory.

PHOTO 2: Wavecor TW030 neo tweeter.

PHOTO 3: Wavecor 5.25˝ WF132TU woofer.

PHOTO 4: Wavecor 7˝ SW178 subwoofer.

Article from the February '07 issue of Voice Coil