Superior Waterless Car Wash Products- Pearl Waterless Car Wash
waterless urinal
1
Tel +91 11 4175 2407 Fax +91 11 4175 2410 [email protected] www.enswico-india.com Enswico (India) Pvt. Ltd. C1, Panchsheel Enclave New Delhi - 110017 India Copyright © 2013 Enswico IP AG – All rights reserved. Just a simple hole At the lowest point (starting from ca. 90 mm below front lip height) of the bowl simply a 50mm hole is required instead of a complex siphon Optimized flow The shape of the drain has to ensure a smooth and complete liquid drain-off Protection against impurity A ceramic cover of the drain is needed Siphon required The production and mounting of the ceramic or plastic siphon is demanding and labor intensive No power and sensors are required Very flexible depending on the respective connection technology No fixed-points have to be considered Back-splash-free shape The geometry of the inner bowl design has to prevent back splash of liquids (incidence angle = angle of reflection) All shapes are possible The shape of the bowl can be geared towards usability and design Normal surface finish No particular surface finish required waterless water flushed Optimized for flushing The entire inner surface of the bowl has to be flushed. For this reason, a sloped rear is not possible Water supply An opening either on the back side or at the top of the bowl is required Geometry is defined by the water flow An optimization of the shape and the positioning and the achievement of the best possible flushing effect have to be balanced Flush control system (Power, sensors, etc.) Cut-outs for water supply, drain and maybe sensors, etc. have to be built-in The installation has to be adjusted to water supply, drain and maybe sensor system Minimum 2-3 fixed points Surface finish calc and dirt repellent (nano technology) The surface finish has to be designed in a way that it repels calc and impurities Drain Aquifer system Design Power Installation Maintenance Advantages of a waterless urinal_ENG_rev_v2_120806 Advantages of a waterless urinal
description
Details and advantages of waterless urinals used for saving water
Transcript of waterless urinal
Tel +91 11 4175 2407Fax +91 11 4175 [email protected]
Enswico (India) Pvt. Ltd.C1, Panchsheel EnclaveNew Delhi - 110017India
Copyright © 2013 Enswico IP AG – All rights reserved.
Just a simple holeAt the lowest point (starting from ca. 90 mm below front lip height) of the bowlsimply a 50mm hole is required instead of a complex siphon
Optimized flowThe shape of the drain has to ensurea smooth and complete liquid drain-off
Protection against impurityA ceramic cover of the drain is needed
Siphon requiredThe production and mounting of theceramic or plastic siphon is demandingand labor intensive
No power and sensors are required
Very flexible depending on the respective connection technologyNo fixed-points have to be considered
Back-splash-free shapeThe geometry of the inner bowl design has to prevent back splash of liquids (incidence angle = angle of reflection)
All shapes are possibleThe shape of the bowl can be geared towards usability and design
Normal surface finishNo particular surface finishrequired
waterless water flushed
Optimized for flushingThe entire inner surface of the bowlhas to be flushed. For this reason, a sloped rear is not possible
Water supplyAn opening either on the back sideor at the top of the bowl is required
Geometry is defined by the water flowAn optimization of the shape and thepositioning and the achievement of thebest possible flushing effect have to bebalanced
Flush control system(Power, sensors, etc.)Cut-outs for water supply, drain andmaybe sensors, etc. have to be built-in
The installation has to be adjusted to water supply, drain and maybe sensor systemMinimum 2-3 fixed points
Surface finish calc and dirt repellent(nano technology)The surface finish has to be designedin a way that it repels calc and impurities
Drain
Aquifer system
Design
Power
Installation
Maintenance
Advantages of a waterless urinal_ENG_rev_v2_120806
Advantages of a waterless urinal
