waterjet propulsion systems
22
waterjet propulsion systems
description
waterjet propulsion systems. 100 SERIES. DJ100G. DJ110. DJ130. DJ170HP. DJ105. DJ120. DJ140HP. 200 SERIES + 300 SERIES. DJ330. DJ200. DJ260. DJ220. DJ350. DJ290. SEVEN MODELS – UP TO 900 kW, VESSELS UP TO 20m. SIX MODELS – UP TO 4000 kW, VESSELS TO OVER 50m. - PowerPoint PPT Presentation
Transcript of waterjet propulsion systems
waterjet propulsion systems
thirteen waterjet model sizes
100 SERIES
200 SERIES + 300 SERIES
DJ100G
DJ105
DJ110
DJ120
DJ130
DJ140HP
DJ170HP
DJ200
DJ220
DJ260
DJ290
DJ330
DJ350
SEVEN MODELS – UP TO 900 kW, VESSELS UP TO 20m
SIX MODELS – UP TO 4000 kW, VESSELS TO OVER 50m
thirteen waterjet model sizes
100 SERIES
200 SERIES
100kW
to suit vessels from 6m
4000kW
to 50m
commercial applications
government & military applications
pleasure craft applications
capability
The Company
Over 40 years experience in the design of commercial waterjet systems.
Thrustmaster DOEN waterjets are manufactured in Houston, TX.
All product built to meet the exacting standards of marine classification societies.
Product in operation worldwide with a global network of sales and support centers.
product features
TRANSOM MOUNTING
product features 100 SERIES
Simple & Quick Integral to hullFlexibility of waterjet positionSuits all hull materials
MODULAR CONSTRUCTION
product features 100 SERIES
Ease of ServiceSeparate assembliesNo special tools required.
MODULAR CONSTRUCTION
IMPELLER
INTAKE BODY
BEARING ASSM.
INTAKE GRATE
IMPELLER CASING
STATOR
STEERING NOZZLE
REVERSE BUCKET
STEERING BOWL
INPUT COUPLING
product features 100 SERIES
DJ100GFOR APPLICATIONS6m – 10m150-350hp dieselsSingle and Twin
special products 100 SERIES
INTEGRAL REDUCTION BOXProviding perfect impeller matching without the need for a marine gear. The fully integrated step down box uses wide faced, ground helical gears supported with high capacity taper roller bearings. This robust arrangement has been designed and tested to commercial ratings.
INTEGRAL REDUCTION BOX
PRE-FABRICATED INTAKE
product features 200 SERIES
•Manufactured in Aluminium or Steel•Weld in installation•Maximum hull integrity•Total material Compatibility•Custom designs•Strong & lightweight
COMPLETE SUPPLY
READY TO INSTALL
control systems
Rotary Servo Control- RSC
mechanical control systems
The Rotary Servo Control (RSC) hydraulic control system provides simple and exact follow up control of the waterjets reverse buckets
FEATURES
•33C push pull cable operation
•Conventional lever operation
•Integral pilot check valves – no leak down
•Integrated with Jet mounted hydraulics
ECS200- Control
For 15m to 25m vessels with dual main station and twin engine configuration
ECS electronic control systems
ECS200 Control is a microprocessor based system for waterjet reverse and steering control, together with primary engine throttle and marine gear command into the one simple to operate system.
electronic control systems
CAN BUS - Control
To suit small and large vessels with multiple control stations and multiple engine configurations.
joystick docking feature
DIRECT THRUST WATERJET
SIMPLE INSTALLATION
REDUCED COST
REDUCED MAINTENANCE
CLOSER COUPLING
All Thrustmaster DOEN Pre-Fabricated Intake Waterjets can be supplied in Direct Thrust arrangement.
Standard waterjet thrust bearing arrangement removed.
Conventional Propeller Shaft Seal and coupling fitted.
Waterjet thrusts directly to gearbox, remote or engine mounted gearbox arrangements possible.
DOEN Exclusive Product
INTEGRATED WATERJET (IWJ)
FOR FIBREGLASS VESSELS SIMPLE INSTALLATION
REDUCED COST
DIRECT THRUST SYSTEM
REDUCED MAINTENANCE
FULLY INTEGRATED TO HULL
SUITED TO VOLUME BUILD
DOEN Exclusive Product
Thank you
