Water Make-Up Systems & Water Treatment Technology · • Fillset I incl. flow limiter Fillsoft...

Water Make-Up Systems &Water Treatment Technology

Fillcontrol, Fillset, Fillsoft

From the initial ideato the solution

2

Smooth operation in supply engineering thanks to system solutions

Reflex Winkelmann GmbH belongs to the Heating&Water division of the Winkelmann Group with 4,200 employees worldwide. The company is a leading brand manufacturer and solution provider for the smooth operation of water-carrying systems in supply engineering and modern building services. In addition to expansion vessels, we develop, manufacture and distribute innovative components and complete solutions for pressure-maintaining, water make-up, degassing, water treatment and storage as well as heat exchangers.

Extensive Product Range

Reflex represents a large range of products and services, offering innovative systems for heating, cooling and hot-water supply and a multitude of other services.

The Reflex product range comprises:• Expansion Vessels• Pressurisation Systems• Water Make-Up Systems & Water Treatment• Degassing Systems & Separation Technology• Hot Water Storage Tanks & Heat Exchangers

For constant reliable heat and water supply.

www.reflex.de

Reflex -The Company

Water Make-up Systems & 4 Water Treatment Overview

Reflex Fillset Compact 6

Reflex Fillset 6

Reflex Fillcontrol Plus Compact 7

Reflex Fillcontrol Plus 7

Reflex Fillcontrol Auto Compact 8

Reflex Fillcontrol Auto 8

Reflex Fillcontrol Auto 2P 10

Reflex Fillcontrol Auto 2PS 11

Reflex Fillsoft I / Fillsoft ll 12

Reflex Fillsoft Theoretical Principles 13

Reflex Combination Options 14

Water Make-up Systems & Water Treatment

Contents

3

Water Make-Up Systems & Water Treatment Technology


Water Make-up Systems & Water Treatment

Fillset Compact

Fillvalve

Fillset

Fillcontrol PlusCompact

Fillcontrol Plus

Fillcontrol Auto Compact

Fillcontrol Auto Fillcontrol P

Fillcontrol Auto 2P

Fillcontrol Auto 2PS

Manual W

ater Make-up

Water Treatm

entAutom

atic Water M

ake-up

Fillsoft l Fillsoft ll SofteningCartridge

Deionisation Cartridge

4



5


10 bar60°C

10 bar60°C

10 bar90°C

Fillset Compact

Fillset

• Pre-fabricated assembly for direct connection of HVAC systems to water mains • Prevents backflow of HVAC water into the water mains• With German DVGW-approved BA-type backflow preventer• Including wall bracket and isolation valves

Type Article No MaterialGroup Width x Height Minimum Flow

PressureVolumetric Flow

Rate KvsInlet-OutletConnection

Weightkg

Fillset Compact 6811305 70 175 x 214 P0 + 1.3 bar 0.8 m3/h R 1/2 - R 1/2 0.9

Fillset Compact M-Bus 9115630 70 285 x 214 P0 + 1.3 bar 0.8 m3/h R 1/2 - R 1/2 2.8

H

B

Fillset Compact

Fillset• Pre-fabricated assembly for direct connection of HVAC systems to water mains• Total quantity of make-up water is measured by a water meter• Prevents backflow of HVAC water into the water mains• With German DVGW-approved BA-type backflow preventer• Including wall bracket and isolation valves




Weightkg

Fillset with Standard Water Meter 6811105 70 293 x 230 P0 + 1.3 bar 0.8 m3/h R 1/2 - R 1/2 1.7

Fillset Impuls 6811205 70 293 x 230 P0 + 1.3 bar 0.8 m3/h R 1/2 - R 1/2 1.7

H

B

Fillset

Reflex Fillvalve• For water make-up within systems which are equipped with compressor controlled pressurisation units• Operates on 230 V output from pressurisation unit




Weightkg

Fillvalve 7858300 35 175 x 91 P0 + 1.3 bar* 1.5 m3/h G 3/4 - G 1/2 1.0

* In combination with Fillset

H

B

Fillvalve

6


10 bar70°C

10 bar90°C

Fillcontrol Plus Compact• Compact, automatic water make-up device for systems with conventional expansion vessels according to DIN 1988 and DIN EN 1717• With system BA-type backflow preventer• Monitored water make-up• Dry contact (common fault)• Input pressure max. 10 bar• Flow rate ca. 0.5 m3/h at ∆p = 1.5 bar

Fillcontrol

Fillcontrol Plus - Make-up Station Without Pump• To monitor diaphragm expansion vessels and for the automatic water make-up of the set initial pressure• Incl. wall bracket• With Control Basic control unit• RS 485 interface, connection of bus/extension modules possible• Capacity monitoring of a Fillsoft water treatment system possible

Type Article No MaterialGroup

Width x Heightx Depth

Minimum FlowPressure Outlet Pressure Inlet-Outlet

ConnectionWeight

kg

Fillcontrol Plus Compact 6811500 79 304 x 240 x 91 P0 + 1.3 bar 0.5 - 5 bar R 1/2 - R 1/2 2.0

Fillsoft External Pressure Sensor 9112004 78 90 x 70 x 35 - - G 1/2 - G 1/2 0.3

H

B

H

B

* In combination with Fillset



Minimum FlowPressure

Volumetric Flow Rate Kvs

Volumetric Flow Rate Kvs

Inlet-OutletConnection

Weightkg

Fillcontrol Plus 8812100 70 320 x 340 x 190 P0 + 1.3 bar* 0.7 m3/h* 1.4 m3/h G 3/4 - G 1/2 2.5

Fillcontrol Plus Stainles Steel 8812200 70 320 x 340 x 190 P0 + 1.3 bar* 0.7 m3/h* 1.4 m3/h G 3/4 - G 1/2 2.5

Fillcontrol Plus Compact

Fillcontrol Plus

7


10 bar30°C

10 bar110°C

Fillcontrol Auto Compact - Water Make-up Station With Pump



Delivery Ratel/h

Min. Supply Ratel/h

Max. SupplyPressure


Weightkg

Fillcontrol Auto Compact 8688500 70 620 x 580 x 290 120 - 180 360 5.5 bar G 1/2 - DN 32 19.1

• Fully automatic water make-up systems with integrated pump• Fillcontrol Auto Compact with integrated intermediate tank as a means of system separation• Systems equipped with Control Basic for simple and clear operation• RS 485 interface, connection of bus/extension modules possible• Capacity monitoring of a Fillsoft water treatment system possible• Including system separation in accordance with DIN 1988 and DIN EN 1717 with Fillcontrol Auto Compact

Fillcontrol Auto Compact

H

B



Delivery Ratel/h

Min. Supply Ratel/h

Max. SupplyPressure


Weightkg

Fillcontrol Auto 8812300 70 690 x 470 x 440 4000 360 5.5 bar G 1 - G 1 1/4 25.0

• Fully automatic water make-up systems with integrated pump• Fillcontrol Auto for water make-up, e.g. from containers or conditioning systems• Systems equipped with Control Basic for simple and clear operation• RS 485 interface, connection of bus/extension modules possible• Capacity monitoring of a Fillsoft water treatment system possible• Fillcontrol Auto for applications suitable for max. 50 % anti-freeze

Fillcontrol Auto - Water Make-up Station With Pump

Fillcontrol Auto

H

DW

Fillcontrol Auto PA compact make up system with breaktank and ball valve.Perfect in combination with Reflex Variomat• 18 l breaktank• WRAS approved ball valve and type AB air gap• Low water alarm• Single pump• LED for status report• Compatible with Reflex Control Touch• Compatible with Fillmeter


Height x Width x Depth mm

Weightkg

Inlet/ outlet connection

VoltageV

CurrentA

PowerkW

Max. operating pressure bar

Max. operating temperature °C

Refex Fillcontrol P 8813100 70 589 x 487 x 320 28 1/2“ / 1/2“ 230/50 2.2 0.4 8 30

Fillcontrol P

H

DW

8


G-vessel with Fillcontrol Plus Compact

G-vessel with Fillcontrol Auto CompactStatic vessel in combination with Fillset RPZ valve, Fillsoft II water softening device and Fillcontrol Auto Compact. If the system pres-sure drops below the setpoint, an appropriate amount of water will be filled into the unit from the water mains via the Fillcontrol Auto Compact device. By the Fillsoft device the sys-tem water can be totally softened or adjusted to the required level.

The Fillset RPZ valve protects against backflow, providing protection against the contamina-tion of mains cold water supply according to EN1717. By connecting the contact water meter to the Fillcontrol Auto Compact control unit the Fillmeter function is available.

Static vessel in combination with Fillcontrol Plus Compact Fillsoft. If the system pressure drops below the setpoint, an appropriate amount of water will be filled into the unit from the water mains via the Fillcontrol Plus Compact device. It also includes a RPZ valve for protection against backflow, providing protection against the contamination of mains cold water supply according to EN1717. By the Fillsoft device the system water can be totally softened or adjusted to the required level.

Reflex Fillsoft IArticle No : 6811600

ExternalPressure Sensor

Article No: 9112004

Reflex FillcontrolPlus Compact

Article No : 6811500

Reflex G vesselPage 12

Boiler/Chillerheating&cooling source

Reflex G vessel

Drain valve

Expansion line

Boiler/Chillerheating&cooling source

Reflex Fillsetwith contactwater meter

Reflex Fillsoft II

Reflex FillcontrolAuto Compact

9


25

50

Fillcontrol



Weightkg


VoltageV

FLCA

PowerkW



Fillcontrol Auto 2P 8813200 70 923 x 802 x 545 41 1/2“ / 1“ 230/50 Hz 2.62* 0.56* 2.5 90

Fillcontrol Auto 2P 8813400 70 1039 x 802 x 625 44 1/2“ / 1“ 230/50 Hz 3.22* 0.75* 4.5 90

DW

H

Fillcontrol Auto 2P

Fillcontrol Auto 2PAutomatic water make up unit used in conjunction with staticpressure expansion vessels.• 18 l breaktank• WRAS approved ball valve and type AB air gap• 6 analogue outputs, 1 volt free contact default values: - min pressure - max pressure - low water cut off - pump failure - pressure level detection - time out• System pressure sensor• Two line LCD Display

* For each pump

10


25

50

Fillcontrol Auto 2PSCombined water make up unit which includes Servitec modulefor automatic vacuum degassing. Commissioning by setting thep0 of the static pressure vessels.• 18 l breaktank• WRAS approved ball valve and type AB air gap• 6 analogue outputs,1 volt free contact default values: - min pressure - max pressure - low water cut off - pump failure - pressure level detection - time out• System pressure sensor• Two line LCD Display• System degassing



Weightkg


VoltageV

FLCA

PowerkW



Fillcontrol Auto 2PS 8813300 70 1039 x 802 x 625 46 1/2“ / 1“ 230/50 Hz 2.62* 0.56* 2.5 90

Fillcontrol Auto 2PS 8813500 70 1039 x 802 x 625 46 1/2“ / 1“ 230/50 Hz 3.22* 0.75* 4.5 90

DW

H

Fillcontrol Auto 2PS

* For each pump

11


Fillsoft l / ll Water Treatment Systems This softening unit is available in two basic versions, depending on the required capacity: Fillsoft I with one or Fillsoft II with two resin cartridges. • Water softening device for initial filling and water make-up in heating systems• Fillsoft I: Soft water capacity 6000 l x °dH• Fillsoft II: Soft water capacity 12000 l x °dH• Incl. shut-off with sample cock and segment connection*• Fillset I incl. flow limiter

Fillsoft

Fillsoft I Fillsoft II

Accessories

FillmeterArticle No : 9119193Material Group : 78

Softmix - Only with softeningArticle No : 9119219Material Group : 78

External pressure sensorArticle No : 9112004Material Group : 86

Fillguard Mini Conductivity SensorArticle No : 9125762Material Group : 78

Total hardness testing kitArticle No : 6811900Material Group : 86


Height x Widthmm Capacity Max. Continuous

Flow l/hInlet/outlet con-

nectionMax. operating temperature °C


Weightkg

Fillsoft I 9125660 78 600 x 260 1 pcs 360 Rp 1/2 - Rp 1/2 5 - 40 8.0 1.9

Fillsoft II 9125661 78 600 x 380 2 pcs 360 Rp 1/2 - Rp 1/2 5 - 40 8.0 3.6

Softening Cartridge 6811800 78 513 x 76 6000 lx°dH - - 5 - 40 8.0 1.5

Deionisation Cartridge 9125662 78 513 x 76 3000 lx°dH - - 5 - 40 8.0 1.5

Total Hardness Soft water capacity

[°dH] in case of full softening6 1019 20378 760 152110 607 121312 505 100914 432 86416 378 75518 335 67120 302 60322 274 54824 251 50226 232 46328 215 43030 201 40132 188 37634 177 35436 167 33438 158 31740 150 301

Type Fillsoft l Fillsoft ll

The benefits of Fillsoft in detail:• Well thought-out complete program for water softening• Simple installation, both as a stand-alone unit and also linked to a Fillcontrol water make-up solution• Durable, efficient heat transfer, as limescale build-up on boiler surfaces is prevented• Long-term protection of your system, as partial thermal and mechanical overloading by lime scale build-up is avoided• Maximum operational safety, as the system’s pH remains stable even if incorrectly operated• Ease of handling by simple cartridge replacement and disposal of used cartridges with household waste

SofteningCartridge

Deionisation Cartridge

°dH = 1.78 °F = 1.25 °E Limit for Tatal hardness {°dH}depending on the specific unit colume VA in acc. VDI 2035 T1*

Group Total capacity < 20 l / kW ≥ 20 l / kW and< 50 l / kW ≥ 50 l / kW

1 < 50 kW ≤ 16.8 °dH** ≤ 11.2 °dH < 0.11 °dH

2 50-200 kW ≤ 11.2 °dH ≤ 8.4 °dH < 0.11 °dH

3 200-600 kW ≤ 8.4 °dH ≤ 0.11 °dH < 0.11 °dH

4 > 600 kW ≤ 0.11 °dH ≤ 0.11 °dH < 0.11 °dH

* Spec. unit volume VA [l/kW] = unit volume / smallest single heating capatity** in case of circulating water heater and systems elec. heating element

Fillsoft Quick Selection

12


Continuously increasing heating surface loads are demanded on modern boil-ers. This increases the risk of deposits of calcium in particular. These deposits may reduce the capacity and may ultimately cause boiler destruction. When aluminium is used as material, the water should be desalinated as the potential for corrosion is higher with untreated water. To prevent corrosion, Reflex offers Fillsoft, a programme designed for treating filling and make-up water as required by the standards.

Reflex recommends to install Fillsoft in every water make-up system as it sig-nificantly contributes to facility reliability at little expense. The core of Fillsoft is a pillar with a replaceable cartridge containing ions in synthetic resin beads. This pillar is equipped with connections for fresh water and filling or make-up water.A shut-off ball valve with test valve at the water make-up side completes the structure.

Combination Options: Fillsoft Zero + FillmeterFillsoft Zero + Fillguard MiniFillsoft Zero + Fillmeter + Fillguard Mini

Theoretical principlesFillsoft water treatment system for make-up water

Fillguard Mini is a conductivity measuring cell for the capacity monitoring of “Fillsoft Zero” deionisation. It is easily and quickly installed at the Fillsoft Zero cartridge head. An additional adapter is not required.

The three-level LED display sends out a signal once the ion exchanger is de-pleted. Thus it is guaranteed that only desalinated water flows into the heating system. Fillguard Mini is only suited for “Fillsoft Zero” deionisation.

Simple capacity monitoring for “Fillsoft Zero”

mains watersoftened

make-up water

SofteningThe softening process follows the principle of cation replacement. Hard fresh water is transported through the exchanger pillar. The magnesium and calcium ion hardening constituents are exchanged with the sodium ions of the resinbeads, which process softens the water. The cartridge must be replaced when the sodium ion capacity is exhausted. Reflex recommends to install Fillsoft in every water make-up system

DeionisationDeionisation uses the principle of ion exchange of cations and anions. Fillsoft Zero offers the option to de-mineralise filling and make-up water. All minerals are absorbed through the cartridge. The cartridge capacity decreases and must be replaced when conductivity and the ion number increases.

mains waterdeionised

make-up water

Fillmeter

Fillguard Mini

Fillsoft Zero 0

0 % 20 %

10 –

40 % 60 % 80 %1 00 %

20

40

60

80

100

120

Cond

uctiv

ity [µ

s/cm

]

Percentage capacity

Conductivity in relation to the Fillsoft Zero capacity

Fillguard Mini

13


Combination Options

Reflex compressor controlled pressurisation unit

Reflex compressor controlled pressurisation unit

Reflex pump controlled pressurisation unit

Reflex Fillsoft II

Reflex Fillsoft II

ReflexExpansion Vessels

Reflexomat Compact

Variomat

Servitec

Reflexomat

Reflex Fillcontrol Plus

Reflex FillcontrolPlus Compact

Reflex Fillset

Reflex Softmix

Reflex Fillsoft II

Fillvalve

Reflex deaeration systems

Reflex Fillsetwith contactwater meter

Pulse Output

To BMS

To BMS

To BMS

To BMS

To BMS

Reflex Externalpressure sensor

Diaphragm Expansion Vessels

Reflex Fillsoft I

Reflex Fillmeter

Reflex Fillset Compact

System Pressure

14


Notes

15

AhlenGermany

Region Western EuropeRegional Sales Director: Frédéric PassotMobile: +33 6 1295 [email protected]

Reflex France Thierry Pereira Tour Part-Dieu 129 rue Servient 69003 Lyon France Phone: +33 4 8191 9159 Fax: +33 4 7803 1631 [email protected]

Reflex NordicJohan RoennbladRatakatu 610300 KarjaaFinlandMobile: +358 40 160 [email protected]

Reflex Nederland B.V.Dado CukorFennaweg 552991 ZA BarendrechtThe NetherlandsPhone: +31 088 880 26 [email protected]

Reflex BeluxMichel BlainMobile: +32 474/59 80 [email protected]

Reflex UK + IrelandTim Williams Manchester Business Park 3000 Aviator Way, Manchester Lancashire M22 5TGPhone: +44 161 266 [email protected]

Reflex Spain, PortugalFrederic PassotMobile: +33 6 1295 [email protected]

Region IMEARegional Sales Director: Moustapha FahmyMobile: +49 151 180 242 [email protected]

Reflex Middle East FZEDubai Silicon Oasis BuildingHeadquarter office A1-101Dubai - UAEMobile: +97 150 340 [email protected]

Reflex Egypt, Libya, SudanAshraf ZeinMobile: +20 100 1691 [email protected]

Reflex Middle EastÖzgür HündürMobile: +90 541 805 [email protected]

Reflex IndiaManoj MadhuMobile: +91 956 762 [email protected]

Reflex MoroccoFatima-Zahra ZafouMobile: +212 6 61 99 47 [email protected]

Region Eastern EuropeRegional Sales Director: Jacek KieszkowskiPhone: +7 495 363 15 [email protected]

Reflex POLSKA Sp. z o.o.Dr. Alfred Jerszynskiul. Swojska 13 60-592Poznan / PolandPhone: +48 61 653 14 02Fax: +48 61 653 14 [email protected]

Reflex SK, s.r.o.Peter Páltik038 42 Rakovo / SlovakiaPhone: +421 43 423 9154Fax: +421 43 423 [email protected]

Reflex CZ, s.r.o.Vit GabrielSezemická 27/57/2193 00 Prag 9Czech RepublicPhone: +420 272 090 311Fax: +420 272 090 [email protected]

Reflex Russia, Kazachstan Reflex Rus, ooo Pavel Kurilov, Roman KurchanovProspect Andropova, 18, building 6, office 5-07 115432 Moscow / RussiaPhone: +7 495 363 15 49Fax: +7 495 363 15 84 [email protected]

Reflex Ukraine, Belarus, CaucasiaAnatol Pivtorak Mobile: +380 67/408 33 69 [email protected]

Reflex LithuaniaVygantas MilaknisMobile: +370 687 27 [email protected]

Reflex EstoniaIvar PärnMobile: +372 510 86 [email protected]

Reflex LatviaAgris PavlukevicsMobile +371 [email protected]

Reflex TurkeyEmir-Okan InanMobile: +90 530 825 24 [email protected]

16

Region Asia/PacificDaniel TestarPhone: +65 8685 [email protected]

Reflex International

Sales Administration

Lydia KreibelPhone : +49 2382 7069 9563 Fax: +49 2382 7069 [email protected] Lea Marie FeldottoPhone : +49 2382 7069 7737 Fax: +49 2382 7069 [email protected]

Tanja Sell Phone: +49 2382 7069 9571 Fax: +49 2382 7069 [email protected]

Jutta Strickmann Phone : +49 2382 7069 9821 Fax: +49 2382 7069 39821 [email protected]

Yvonne Horstmann Phone: +49 2382 7069 9783 [email protected]

Robert LewandowskiPhone: +48 56 6884472 [email protected]

Region ChinaReflex (Shanghai) Heating &Energy Equipment Ltd. CoMr. Cao Dihua (Tommy)No. 159 Renbao Rd.Fengchen Town, Fenxian District201408 Shanghai, P. R. ChinaPhone: +86 21 57171822 168Fax: +86 21 57171833Mobile: +86 136 3654 [email protected]

International Project Sales, Technical Manager

Northern Europe & AmericaAndreas DörrichPhone : +49 160 97998197 [email protected]

Western EuropeBart de WandelerPhone: +32 495 30 20 [email protected]

D-A-CH & Southern EuropeJörg WeidenmüllerPhone: +49 151 23 22 06 [email protected]

Eastern EuropeMichael LabedzkiPhone: +48 61 84 62 [email protected]

Arabian Gulf & Middle EastMohamed Sheik Farid Phone: +971 50 136 23 [email protected]

Asia PacificDaniel TestarPhone: +65 868 545 [email protected]

Head of Project SalesMatthias FeldPhone: +49 2382 7069 9536 [email protected]

Head of Trade SalesKai-Hendrik JoswigPhone: +49 2382 7069 [email protected]

Head of OEM BusinessRein van RijtPhone: +49 2382 7069 9559 [email protected]

Head of Sales AdministrationHendrik Westhölter Phone: +49 2382 7069 9541 Fax: +49 2382 7069 39541 [email protected]

Head of After Sales & Services Harald Schwenzig Phone: +49 2382 7069 [email protected]

Region AmericaSinus North America Mfg. IncMichael Strasen321 Shoemaker Street, N2E 3B3 Kitchener / CanadaMobile: +1 226 751 2722 [email protected]

Region Central EuropeRegional Sales Director: André Schweitzer

Reflex Winkelmann GmbH André Schweitzer Gersteinstraße 19 59227 Ahlen Germany Phone: +49 2382 7069 9710 [email protected] www.reflex.de

Reflex Austria GmbHWolfgang BurianekHirschstettner Strasse 19-21BT. I/3. OG1220 ViennaAustriaPhone: +43 1 616 02 510Fax: +43 1 616/02 50 [email protected]

Reflex Switzerland GmbHRoger GrossHohenrainstrasse 104133 Pratteln, SwitzerlandPhone: +41 61 825 69 52Fax: +41 61 825 69 [email protected]

Reflex HungaryPeter GosiFalk Miksa ú 41055 BudapestHungaryPhone/Fax: +36 133 180 82Mobile: +36 309 311 [email protected]

Reflex ItalyWalter BachmannPhone: +39 348 688 [email protected]

Reflex Balkans, BulgariaTina LamprinidouPhone: +30 210 67 14 [email protected]

Reflex Hellas A.E.Tina LamprinidouVouliagmenis Av. 16517237 DafniGreecePhone: +30 210 67 14 737Fax: +30 210 67 14 [email protected]@reflex-hellas.gr

Reflex RomaniaAndrei Stoican2nd District, 15 Oltetului Street,023871 Bucharest, RomaniaPhone: +40 318 170 713Fax: +40 133 180 82Mobile: +40 751 248 [email protected]

17

The Reflex brand name is well known in Europe and throughout the world as a major leader in pressurecontrol technology for heating, chilled and potable water applications. Our world wide growth has allowedus to build several state-of-the-art manufacturing facilities supplying the industry with outstanding qualityproducts. Reflex Winkelmann GmbH having its headquarters in the Westfalian city of Ahlen is not only arecognized leader in expansion vessels but also a significant manufacturer of advanced system solutionssuch as compressor and pump-controlled pressurisation systems, automatic air separation systems andhot water heaters.

18

Reflex has achieved its significant global growth today thanks to the unique combination of its world-classmanufacturing skills, dedication to high-product quality at an affordable price and its commitment tocontinuous technical training of its people, our most precious resource. Our tradition goes back to 1898.This family oriented company started its core business in the elaboration of steel. A business in whichwe are recognised leaders today. The Heinrich Winkelmann Group form the parent company to a wholegroup of diversified manufacturing companies serving the heating segment and the whole automotiveindustry with over 4.200 employees. A tradition of more than a hundred years in this business makes usreal experts today.

19

Reflex Winkelmann GmbHGersteinstrasse 19

59227 Ahlen, Germany

Tel.: +49 2382 7069-0Fax: +49 2382 7069-588

www.reflex.de

PI15

08en

A/91

2552

7/ 0

8-20

16

Water Make-Up Systems & Water Treatment Technology · • Fillset I incl. flow limiter Fillsoft...

Documents

Transcript of Water Make-Up Systems & Water Treatment Technology · • Fillset I incl. flow limiter Fillsoft...