1 RhinoGold Tutorial Series

Smart Curve

First, we’ll go to the Drawing tab and select the

Smart Curve tool and define a curve of 22 mm.

1 Gauge

Now, we’ll select the Gauge tool and define a ring

of 18mm size, European type.

2

Smart Curve

Then, we’ll trace a similar curve to the image with

the Smart Curve tool, in the Drawing tab, we’ll try

that the curve maintain contact with the two curves ma-

de in the previous step.

3 Sweep 2 Rail

Then, we’ll apply the Sweep 2 Rails tool, selecting

the three curves and activating the "Maintain

height" in the tool parameters. We’ll obtain a similar result

to the object displayed in the image.

4

Water Lily Ring

In this tutorial we will use RhinoGold tools such as, Bend,

Symmetry Vertical , Gem studio, Extrude, Dynamic Polar

Array and Sweep 2 Rails.

2 RhinoGold Tutorial Series

Bend

Now, in the Transform tab, we’ll select the Bend tool

and apply it to the solid, enabling the Symmetry

option in line Command.

5 Symmetry Vertical

Then, we’ll apply a symmetry with the Symmetry

Vertical tool.

6

Gem Studio

Then, we’ll select the Gem Studio tool, in the Gem

tab and define a Brilliant of 4 mm.

7 Head

Now, we’ll define a head gem composed of 4

prongs and 2 rails, with the Head tool, in the Jewe-

llery tab.

8

Smart Curve

Then, we’ll go to the Drawing tab and select the

Smart Curve tool and define a similar curve to

which it shown in the image.

9 Extrude

Now, we’ ll make an extrusion 1 mm to the curve

created above with the Extrude tool, in the Mode-

lling tab.

10

3 RhinoGold Tutorial Series

Gumball

Then, we’ll select the Gumball command and mo-

ve the extruded solid positioning it with the Head, as

shown in the picture.

11 Bend

In this step, we’ll select the Bend tool and apply it to

the solid extruded, as shown in the picture.

12

Gem Studio

Then, we’ll go to the Gems tab and apply 1mm

Gems to the solid surface.

13 Cutter

Now, in the Jewellery tab, we’ll select the Cutter

tool and apply it to the gems of the solid.

14

Boolean Difference

Then, we’ll apply a Boolean Difference to the cut-

ters to subtract from the solid surface.

15 Prong Studio

In this step, we’ll define the prongs on the small

gems with Prong Studio tool, in the Jewellery tab.

16

4 RhinoGold Tutorial Series

Dynamic Polar Array

Now, we’ll go to the Transform tab and select the

Dynamic Polar Array tool, we’ll apply it to the extru-

ded solid with gems and prongs, generating an Array of 5

copies.

17 Ungroup/Copy

Then, we’ll ungroup the copies of the array with the

ungroup option, with the Grouping tool, in the

Drawing tab and will make a copy of the array object

with gems and prongs.

18

Dynamic Polar Array

Repeat the operation with the Dynamic Polar Array

with the copy from the previous step.

19 Torus

Then, we’ll define an object made with the Torus

tool, positioning it a similar form to the picture.

20

Ungroup/Copy

Repeat the process Ungroup and copy an object,

in this case the second Array. We’ll position the

copy in the same form as in the image.

21 Dynamic Polar Array

We’ll define once again a Dynamic Polar Array of

five copies, applying the object from above.

22

5 RhinoGold Tutorial Series

Boolean Union

Finally, we’ll apply a Boolean Union between all

solids to unify the ring.

23