Wardrobe Space Saver - media.prusaprinters.org€¦ · wardrobe organizer hook closet Watch your...
3
Summary This is a space saver for your wardrobe. The hook can move freely and lock into 3 positions, you can also turn the hook 360°. There are only little supports needed for the print and the hook joint is printed in place, so no assembly will be needed there. Assembly guide: Print the hook and the main body, you can also use the 3mf or gcode file which is already pre configured. Turn the hook joint a little to set it free, it should move easily afterwards. The hook can be guided in to the main body through the opening. I recommend to use the .gcode or .3mf file as this is already correctly orientated and sliced. +++++++++++++++++++++++++++++++++++++++++++++ ++++ Nils Kal Wardrobe Space Saver VIEW IN BROWSER updated 23. 2. 2020 | published 23. 2. 2020 1. 2. 3.
Transcript of Wardrobe Space Saver - media.prusaprinters.org€¦ · wardrobe organizer hook closet Watch your...
Summary
This is a space saver for your wardrobe. The hook can move freely andlock into 3 positions, you can also turn the hook 360°. There are only littlesupports needed for the print and the hook joint is printed in place, so noassembly will be needed there.
Assembly guide:
Print the hook and the main body, you can also use the 3mf or gcodefile which is already pre configured.Turn the hook joint a little to set it free, it should move easilyafterwards.The hook can be guided in to the main body through the opening.
I recommend to use the .gcode or .3mf file as this is already correctlyorientated and sliced.
+++++++++++++++++++++++++++++++++++++++++++++++++
Nils Kal
Wardrobe SpaceSaver
VIEW IN BROWSER
updated 23. 2. 2020 | published 23. 2. 2020
1.
2.
3.
5.07 hrs
1 pcs
f
0.20 mm
k
0.40 mm
h
1
65.00 g
d
MK3/S
Print Files (.gcode) DOWNLOAD ALL FILES
5.1 MB
5.07 hrs f 0.20 mm k 0.40 mm h PLA 65.20 g d MK3/S
updated 23. 2. 2020
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
283.7 KBupdated 23. 2. 2020
196.6 KBupdated 23. 2. 2020
If you like this file or need some adjustments feel free to leave a comment. A rating or tip is also
welcome and may check out my other designs!
Happy printing!
Household > Bedroom
wardrobe organizer hook closet
Watch your slicer to correctly bridge for the main body, may change thebridging angle (I also did this for the 3mf and gcode)
wardrobe-space-saver_02mm_pla_mk3s_5h4m.gcode
main-body.stl
wardrobe-space-saver.3mf
489.0 KBupdated 23. 2. 2020
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-NonCommercial
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition
hook.stl
