LED Cabinet LightWafer Series

Professional lighting for any applicationwww.gl-leds.com01

The Technology in Wafer SeriesOptical - Mechanical - Electrical - Thermal

Specification

Brilliant White Chrome Pearl Nickel

Wafer is brilliantly designed and engineered to offer true colour consistency and perfect uniformity across the emitting surface.

Advanced optical design harnesses the full potential of Light Guide Technology. Thermally managed LEDs emit light that passes through the light panel lens, which is then internally reflected and laterally refocused to emerge in a perfectly distributed formation.

Wafer Series design purifies the light output in any situation where accent lighting requires uniformity and provides a powerful yet discreet lighting feature.

Color Options

www.gl-leds.com02

Part number size LED Power WorkingVoltage

Luminousflux

LuminousEfficacy Ra

GLF-AA01-X 3014 4W 100-240VAC 240lm 60lm/W >80Ø96x6.8

www.gl-leds.com03

1. Wafer is designed with ultra-thin 6.8mm structure size.

2. Perfect CCT for cabinet light in combination with various exterior color processing.

3. Various installation ways, adaptable to different occasions.

4. Selection of constant voltage power supply, easy to deal with the scheme of using

5. One power supply for multiple fixtures.

Features Application

1. Cabinet

2. Wardrobe

3. Showcase

4. Jewelry counter

5. Accent showpiece

6. Prominent highlighting

Photometrics

Mounting Plate

Miro-Silver Reflective Disk

Light Guide Reflector

Light Guide Disk

Optical Light Diffuser

Thermo-Plastic Heat Sink

High Output LED Chips

30

60

90

120

150-/+180

-150

-120

-90

-60

-30

UNIT:cdC0/180

UNIT:cd

C90/270

AVERAGE BEAM ANGLE(50%):98.4 DEG0

0.0

13.0

26.0

39.0

52.0

65.0

www.gl-leds.com04

1.0m 25.07/62.9lx 230.93cm

6.266/15.73lx 461.87cm

2.785/6.990lx 692.80cm

1.567/3.932lx 923.74cm

1.003/2.516lx 1154.67cm

2.0m

3.0m

4.0m

5.0m

Height Eavg/Emax Angle:98.21deg Diameter

Intelligent Design

Wafer Series has been designed to make installation a breeze. From the electrical connections to the mechanical fixings, each cabinet light takes only minutes to connect and install.

WARNING. To avoid risk of shock, ensure power is off when installing Wafer.WARNING. When opening installation holes or mounting cavities, ensure surface is not directly over hidden wires or plumbing.

www.gl-leds.com05

Installation

AC100-240V

AC100-240V

AC100-240V AC100-240V

AC100-240V

AC100-240V

PowerDC:12V

PowerDC:12V

PowerDC:12V

PowerDC:12V

PowerDC:12V

PowerDC:12V

Surface Mounted Installation (Wiring Side Outlet)

Use pincers to take out removeable wall section. Place guide plate in desired location and fix supplied screws securely.Affix Wafer to the surface, ensuring wire uses gap created by extracted wall section.Connect power, test and enjoy.

Surface Mounted Installation (Hidden Wiring)

Drill hole in the desired surface. Place guide plate in desired location and fix supplied screws securely.Ensure wire is not over stressed when drawn through new installation cavity and connect 'Easy-Plug' connector to driver.Affix Wafer to the surface.Connect power, test and enjoy.

Embedded Installation.

Affix two enclosed springs to the reverse of Wafer securely. Ensure stabalising arms face outwards.

Prepare hole in the desired surface with a diameter measuring 75mm.

Ensure wire is not over stressed when drawn through new installation cavity and connect 'Easy-Plug' connector to driver.

Bend springs into a 180 degree angle and insert into cavity, affixing Wafer to the surface.

Connect power, test and enjoy.

Surface Mount (3M Adhesive Tape)

For an even more simple installation method replace the screws with 3M tape supplied with Wafer.

Options available:1. Single light + ‘Easy Plug’ connector2. Single light + 4W driver + ‘Easy Plug’ connector 3. Trio light + 24W driver + 6 Pin ‘Easy Plug’ connector

www.gl-leds.com06

How to buy

1. Avoid installing Wafer in high magnetic or high-voltage regions.2. Ensure proper installation of this product to avoid potential accidents or fires.3. Ensure Wafer is installed in a well-ventilated location with appropriate ambient temperature.4. Please check all connections before switching on power.5. Wafer should be installed by professionals ONLY.6. Do not attempt to repair Wafer, any external or internal alterations will instantly void warranty.

Note

Part No. size Inner boxsize Carton Size Packing

QuantitiesN.W.(kg)

G.W.(kg)

GLF-AA01-X 159x106x34mm 550x360x180mm 50pcs 0.06 /Ø96x6.8mm

Packing details

PowerSupply

Power

Supply

1: 1pce Light 2: 1pce Light + 1pce Power 3: 3pcs Light + 1pce Power

1

2

3