Wacker Compaction Plates.pdf

Soil compaction.Efficient, powerful machines for first-class foundations.

09

88

11

8/0

3/2

01

0/H

eid

lmai

r/P

rint

Sta

www.wackerneuson.com

Please note: The product range of the Wacker Neuson Group comprises more than 300 different product groups in the light and compact equipment areas. In the light equipment area the product range comprises various device types – according to different voltage and frequency conditions, local regulations, market specifics and operating conditions. Not all Wacker Neuson products listed or shown here are therefore available or approved in all countries. Modifications reserved in the interest of continuous further development. The Wacker Neuson Group will not be liable for the correctness and completeness of the data provided in this brochure. Reprints permissible only with prior approval in writing by the Wacker Neuson Group, Munich. © Wacker Neuson SE 2010. All rights reserved.

Hermann Wacker began developing vibratory plates early on and provided increasing levels of compaction force with his ideas. This has allowed him to fundamentally shape the market with constantly new development standards all the way up to the present day.

Today Wacker Neuson is a future-oriented, global company working out solutions for the construction industry now as it did then. The ideas are always fresh, but our guiding values have remained the same since the beginning: reliability, trust-worthiness, quality, short reaction times, flexibility and innovation – these are what our customers rely on.

A well compacted sub-base is a necessary foundation for any construction.

2_3 WACKER NEUSON SOIL COMPACTION

Page 6

SOIL, TRENCH AND PAVING COMPACTORS - Forward traveling vibratory plates - Single direction vibratory plates - Reversible vibratory plates - Coupling set

Page 46

TRENCH AND DITCH COMPACTORS - Remote controlled vibratory plate - Remote controlled vibratory trench roller

Page 56

REMOTE CONTROL TECHNOLOGY - An innovative safety concept from Wacker Neuson

Page 62

ACCESSORIES - Accessories

SOIL COMPACTION SYSTEMS

Page 4

APPLICATION FOCUSES OF THE COMPACTION MACHINES - An overview

The optimal compaction machine for every type of soil. From Wacker Neuson.


Application focuses of the compaction machines

The self-explanatory model guide: very suitable suitable – not suitable

APPLICATION FOCUSES SOIL COMPACTION

Vibratory rammers

Vibratory plates

Double drum vibratory rollers

Vibratory trench roller (sheep's foot)

Articulated vibratory rollers

Narrow pipe trenches / cabling – – –

Trenches – –

Foundation work –

Construction backfilling –

Gardening and landscaping

Sidewalks and cycle tracks –

Estate and garden entrances –

Playgrounds and sporting facilities – –

Parking lots and industrial courtyards – –

Road construction

Rail construction –

Hydraulic engineering, depot construction –

ASPHALT COMPACTION

Minor repair work –

Sidewalks and cycle tracks –

Estate and garden entrances –

Parking lots and industrial courtyards – –

Road construction –

OTHER COMPACTION WORK

Interlocking paving stones – – –

Roll-crete

Compressed concrete (dry) – – –

Op

era

tin

g

we

igh

t

kg Su

ita

bili

ty

La

yer

th

ick

ne

ss

cm Nu

mb

er

o

f p

ass

es

Su

ita

bili

ty

La

yer

th

ick

ne

ss

cm Nu

mb

er

o

f p

ass

es

Su

ita

bili

ty

La

yer

th

ick

ne

ss

cm Nu

mb

er

o

f p

ass

es

LAYER DEPTHS AND NUMBER OF PASSES

Coarse grain soils not cohesive – slightly cohesive

Mixed grain soils slightly cohesive – cohesive

Fine grained soils cohesive

LIGHT COMPACTION MACHINES (primarily for the embedment zone)

Vibratory rammers (light) 30 < 15 2 - 4 < 15 2 - 4 < 10 2 - 4

Vibratory rammers (medium) 30 - 60 20 - 40 2 - 4 15 - 30 3 - 4 10 - 30 2 - 4

Vibratory plates (light) < 100 < 20 3 - 5 < 15 4 - 6 – – –

Vibratory plates (medium) 100 - 300 20 - 30 3 - 5 15 - 25 4 - 6 – – –

Vibratory rollers (light) < 600 20 - 30 4 - 6 15 - 25 5 - 6 – – –

MEDIUM-HEAVY AND HEAVY COMPACTION MACHINES (above the embedment zone)

Vibratory rammers (medium) 30 - 60 20 - 40 2 - 4 15 - 30 2 - 4 10 - 30 2 - 4

Vibratory rammers (heavy) 60 - 200 40 - 50 2 - 4 20 - 40 2 - 4 20 - 30 2 - 4

Vibratory plates (medium) 300 - 550 30 - 50 3 - 5 20 - 40 3 - 5 – – –

Vibratory plates (heavy) > 550 40 - 70 3 - 5 30 - 50 3 - 5 – – –

Vibratory rollers 600 - 8.000 20 - 50 4 - 6 20 - 40 5 - 6 – – –

* The guidelines figures in the table depend on the grain size distribution and the water content of the soil to be compacted, as well as other factors. Modifications reserved in the interest of continuous further development.

They impress not only with the quality of their components, but also their efficiency:

• The widest range of centrifugal forces, from 10 to 300 kN.

• Different plate widths.

• Several models to choose from.

• Functional design.

• Good maneuverability.

• Low maintenance.

• Base plates with high wear resistance.

• Robust construction for a long life.

Vibratory plates from Wacker Neuson are indispensable on the construction site.

Soil, trench and paving

compactors6_7 WACKER NEUSON SOIL COMPACTION

The specialists, when you're in a tight spot: WP 1030 and WP 1235.

Unbeatable in very confined spaces: WP 1540 and WP 1550.


WP 1235

Tailor-made for applications in the smallest of areas and in trenches.

- Narrow plate width 30 cm or 35 cm.

- More power on small surfaces.

- Functional design with perfect ergonomics.

- Improved maneuverability.

- Straight edges allow optimal compaction along walls.

- Three recessed handles in the control panel for easy transport.

- Ideal for gardening and landscaping.

Quick and agile in use:

- Improved ergonomics, better performance.

- Design allows uncomplicated working directly along walls in trenches or in small areas.

- Improved maneuverability.

- Sloped base plate simplifies on-the-spot compaction.

- Easy to transport even on small loading areas, thanks to forward-folding guide handle.

- Minimal maintenance.

- Two engine models available.

WP 1030 WP 1235Plate width 30 - 35 cm

Compaction force 10 - 12 kN

Weight 50 - 60 kg

A new guide handle design and the stable frame provide optimum stability during sideways operation.

Soil, trench and paving compactors

WP 1540 WP 1550Plate width 40 - 50 cm

Compaction force 15 kN

Weight 75 - 85 kg

WP 1550

High performance for small surfaces: WP 2050.

The professionals for continuous operation: WPP 1540 and WPP 1550.


WP 2050

First class for applications in narrow trenches or ditches.

- 20 kN compaction force at 50 cm plate width.

- Optimum compaction along walls thanks to straight base plate edges.

- Agile on all soils thanks to the specially shaped running surface.


- The ergonomic guide handle provides excellent stability during sideways operation also.

- Minimal maintenance.

- Ideal for laying light interlocking paving stones.

Excellent performance with ease of use: - Robust all-rounder, designed for continuous use. - Now with an unbeatable functional and stable transport roller, making it easy

to move to a different place on the construction site.- Low overall weight thanks to high-strength and light aluminum components.- Newly developed, wear-proof and break-proof base plate made of ductile

graphite iron.- Optimized running surface ensures a rapid forward travel speed and perfect

rotary movements.- Sloped base plate simplifies on-the-spot compaction.- Innovative guide handle that allows optimal turning. Can be folded forward

in its entirety, for compact transport dimensions.- Excellent stability in sideways operation due to the new guide handle

and stable frame with additional handles.- Ideal for compacting gravelly sand beds in the construction of roads,

paths and car parks.

WP 2050Plate width 50 cm


Weight 105 kg


WPP 1540 WPP 1550Plate width 40 - 50 cm


Weight 80 - 85 kg

WPP 1550

High mobility on the construction site thanks to a robust transport roller.

Vibratory plates with unlimited possibilities: DPS 1850 Basic & Vario.


DPS 1850 Basic

The DPS 1850 is astoundingly versatile and can be used in a wide range of areas:

- Ideal throttle lever location for great ease of operation.

- Patented vibration isolation on the height-adjustable guide handle.

- Wear and break resistant even for long-term use thanks to an extremely impact-resistant ductile graphite iron base plate.

- Excellent compaction all-rounder for soil, asphalt and interlocking paving stones.


DPS 1850Plate width 50 cm


Weight 108 - 110 kg

1

3

2

4 5

Adjustable centrifugal force: from light to powerful.

The ability to adjust centrifugal force while keeping the frequency constant provides the required force on the soil. The adjustable vario-exciter can be adjusted to the respective soil conditions.

ALSO AVAILABLE WITH ADJUSTABLE CENTRIFUGAL FORCE.

1 Practical transport device

2 Retrofittable water tank

3 Paving pads as accessories

4 Additional protective frame

The all-rounder: WPU 1550.


WPU 1550

Unbeatable flexibility and efficiency thanks to advance and reverse travel:

- Robust all-rounder, designed for continuous use.

- Low overall weight thanks to high-strength and light aluminum components.

- Optimized running surface ensures a rapid forward travel speed and perfect rotary movements.


- Special guide handle design and stable frame with additional handles offer optimum stability during sideways operation.

- Guide handle lowerable forwards creates compact transport dimensions and simplifies guidance of the machine on slopes.

- New frame design provides the engine with additional protection.

- Comfort which you won't want to miss out on: easily accessible throttle remote control, non-detachable fuel cap, and large lifting point.

- Ideal for a wide range of tasks in the road construction, gardening and landscaping.


WPU 1550Plate width 50 cm


Weight 95 kg

1 3

2

THE EFFICIENT LIGHTWEIGHT FOR PROFESSIONAL CONTINUOUS USE.1 Sloped base plate simplifies on-the-spot

compaction work.

2 With the guide handle folded completely forwards, the dimensions of the WPU 1550 are so compact that it can even be transported in the trunk of a car.

3 Rapid forward travel speed, plus a reverse gear - these are the best conditions for professional and efficient use.

1 Machine in oper-ating position.

2 Push center pole towards the machine.

3 Lock in place. The retention lock ensures safe transport, because the center pole can not release itself.

4 In order to roll the machine away, put your foot on the pad.

5 Tip the machine back onto the wheels.

6 Then simply transport it away.

The integrated wheel set: quickly and easily from the operating position to the transport position.Mobility guaranteed: BPU 2540, DPU 2540, DPU 2550, 2560 and 2560 Top Speed.


All-rounders for paving, cabling, gardening and landscaping:

- The integrated wheel set guarantees optimal mobility.

- Extremely robust machine design.

- Extra long tank nozzle prevents the ingress of dirt particles.

- Automatically self-locking center pole for excellent protection during transport.

- Throttle lever with protected idling position.

- Best base plate material quality through the ideal combination of break resistance and low wear levels.

- Working precisely and free from fatigue with guide handle dampening and reduced hand-arm vibrations.

- Different versions available with a Wacker Neuson, Honda or Hatz engine.


BPU 2540 DPU 2540 DPU 2550 DPU 2560 DPU 2560 (TS)Plate width 40 - 60 cm


Weight 140 - 164 kg

BPU 2540

Foldable lifting point for easy movement and transport. The folding mechanism keeps the machine's height low.

DPU 2560

The Top Speed version:

Specially designed for interlocking paving stones: The Top Speed version possesses superb surface capacity with its high speed.

A light and agile all-rounder: BPU 3050, DPU 3050, DPU 3060, 3060 Top Speed and 3070.


DPU 3050

Long-life, robust machine design – equipped for all applications.

- Throttle lever with protected idling position.

- An extra long tank nozzle prevents the infiltration of dirt particles when refueling.

- Excellent operator protection during transport: the center pole has an automatic self-locking mechanism.

- Best base plate material quality through the ideal combination of break resistance and low wear levels.

- Working precisely and free from fatigue with guide handle dampening and reduced hand-arm vibrations.

- DPU 3050 and DPU 3060 also available with electric start.

- Available with diesel and gasoline engines.

- Different versions available with a Wacker Neuson, Honda or Hatz engine.

- DPU 3060 also available as a Top Speed version. See Page 16/17 for more details.


BPU 3050 DPU 3050 DPU 3060 DPU 3060 (TS) DPU 3070Plate width 50 - 70 cm


Weight 166 - 215 kg

The integrated wheel set is extremely robust: Not even hot asphalt or drops from curb edges have any effect. Machine transport is comfortable and simple. Refer to page 17 for more information.

Thema/Maschine NEU:DPU 3750, DPU 3760

20_21 WACKER NEUSON SOIL COMPACTION Soil, trench and paving compactors

DPU 3750 DPU 3760Plate width 50 - 60 cm


Weight 247 - 274 kg

Maximum compaction in a very confined space: DPU 3750, DPU 3760.

Unequalled in compactness and performance.

- Especially good for cohesive soils in narrow trenches thanks to its small dimensions and high compaction performance.

- High forward travel speed combined with high compaction performance even on a difficult surface.

- A robust, integrated wheel set provides maximum mobility on the construction site of the type that's usually only to be expected with smaller plates.

- Available with electric or manual start.

- Working precisely and free from fatigue with guide handle dampening and reduced hand-arm vibration.

- Base plate made of wear-resistant ductile graphite iron (GJS-700).

- Plentiful power reserves, resulting in lower stress on the engine and long work times.

- Material and components are designed for high stress. This ensures a long service life and reduces maintenance costs.

- Also ideally suited to compact light interlocking paving stones thanks to very smooth running.

NEW: COMPACT AND MOBILE LIKE A SMALL UNIT – POWERFUL LIKE A LARGE ONE.

1

3

2

1 Large fuel tank opening with non-detachable fuel cap.

2 Swivel-action and lockable center pole for compact and safe transport.

3 Low vibration: Handle dampening reduces hand-arm vibrations.

Gets to where it's needed quickly and reliably: BPU 4045, DPU 4045, DPU 4545.


A NEW GENERATION OF MODELS: High surface capacity thanks to a faster running speed.

- Increasing the reverse travel speed to the level of the forward travel speed allows more consistent compaction results to be achieved. The travel speed is variable.

- The optimized two-shaft exciter technology, the power (centrifugal force) of which has been increased by 10 and 12.5 per cent, provides for the greatest possible compaction depth on almost all soils.

- Improved gradeability.

- Convenient to operate and handle.


- Robust cover provides optimum protection for the machine.

- Optimal safety with operator present system: This prevents the operator from being trapped between the machine and obstacles when operating backwards.

- Available with crank start, recoil or electric starter (including new signal tone generator) depending on engine type (see Page 27).

- Optionally available with diesel engine (Yanmar and Hatz) or gasoline engine (Honda).


BPU 4045 DPU 4045 DPU 4545Plate width 60 - 61 cm* Compaction force 40 - 45 kNWeight 356 - 386 kg*

* Data includes extension plates supplied as standard.

DPU 4045

BPU 4045

Included extension plates provide variable operating widths.

Integrated, extremely stable lifting point made from solid material for easy movement and transport.

The specialist on cohesive soils: DPU 5545, BPU 5545.


DPU 5545

THE NEW MODEL GENERATION: Especially strong on cohesive soils, thanks to optimized performance.

- Faster reverse travel: Adaptation of the reversing travel to the forward travel allows for more consistent compaction results. The travel speed is variable.

- The improved two-shaft exciter technology ensures faster advance travel, the greatest possible compaction depth and greater ease of operation.

- Included extension plates for variable working widths.


- Optimum protection for the machine through a robust cover.


- Available with recoil, crank or electric starter (including new signal tone generator) (see Page 27).

- Available with either a Honda or Hatz engine.

- Paving pad available as accessory.


DPU 5545 BPU 5545Plate width 61 cm*


Weight 386 - 405 kg*


Unbeatable on any surface: DPU 6555.

DPU 6555

THE NEW MODEL GENERATION: With significantly increased power, the DPU 6555 offers the greatest possible compaction depth and vibrates even heavy interlocking paving stones reliably.

- With a variable speed selection, the reversing travel speed brought to the level of the forward travel speed allows efficient working with a consistently high surface quality.

- The improved two-shaft exciter technology provides a greater centrifugal force and thereby greater gradeability and the greatest possible compaction depth on almost all soils.


- Numerous convenience functions that extend the service life and also ensure shorter maintenance times and costs: e.g. automatic low oil shutoff, self-retensioning V-belts and maintenance-free alternators.


- Available with either crank or electric starter.

- Variable operating widths with different extension plates.

- Thanks to the even forward and reverse travel, perfect for trench and surface compaction and for vibrating heavy interlocking paving stones.


DPU 6555Plate width 71 cm*


Weight 476 kg*

* Data includes extension plates supplied as standard.26_27 WACKER NEUSON SOIL COMPACTION

Universally useable thanks to 69 Hz frequency: Whether it's soils or interlocking paving stones – with a frequency of 69 Hz, this vibratory plate is suitable for numerous applications.

MAXIMUM PRODUCTIVITY FOR THE MOST EXACTING PROFESSIONAL DEMANDS.

User-friendly electric starter:

The versions of the electric starter can be started conveniently by turning the ignition key. The electric starter is fed from a vibration-resistant battery. A new, loud signal tone generator indicates when the machine is still switched on despite the engine being stopped. This prevents unnecessary battery discharge.


An efficient power house: DPU 100-70.

DPU 100-70

Through performance to increased profitability:

- Enormous compaction depth and a high surface capacity – resulting in extremely low operating costs and great economy in use.

- Pleasant, simple and safe to use thanks to a reliable "electronic control" at the height of the guide handle. It replaces the previous relay control and its position makes it resistant against malfunctions caused by vibrations and moisture and well protected against short circuits and incorrect voltage.

- Efficient operation with an invention from Wacker Neuson: The direction can be changed directly at the guide handle without repositioning. This allows for intuitive operation and reduces mistakes when using the vibratory plate.

- The vibratory plate has extensive reserves and therefore never reaches its maximum output. This protects the engine and makes the DPU 100-70 extremely long-lived and robust.

- Very safe: The vibratory plate automatically switches into safe operating mode in the case of an error or if control is lost, without the emergency stop switch or operator back-up safety feature having to be activated.

- Variable operating widths with different extension plates.


DPU 100-70Plate width 87 cm*


Weight 757 kg*


Ideal:

Possible to change direction at the guide handle without repositioning.



DPU 130Plate width 120 cm


Weight 1,170 kg

THE VIBRATORY PLATE WITH THE GREATEST CENTRIFUGAL FORCE.

The efficient solution for demanding compaction tasks. The DPU 130 combines the performance of a 7 t roller with the product and operating advantages of vibratory plates:

- With a centrifugal force of 130 kN, it is by far the most powerful vibratory plate on the market and can easily replace any 7 t roller.

- Lighter and easier to transport than rollers, making it ideal for frequently changing places of use.

- A convenient operating concept: Control is exclusively via the intuitively operated infrared remote control. This means that the operator is not troubled by noise, exhaust, dust or vibrations. Autostart function simplifies commissioning.

- Safety at the highest level: Remote control makes the DPU 130 ideally suited for compaction on slopes, since it means that there is then no danger of falling off ride-on machines. Thanks to a proximity recognition sensor, the machine switches itself off if it gets too close to the operator.

- Electronic security systems provide protection against theft (PIN entry) and prevent damage to the machine from incorrect operation (overload protection during operation on unsuitable, extremely hard surfaces such as concrete).

- Its light weight in comparison with rollers means that it can also be used in statically sensitive locations: on bridges, in town centers, on protected buildings of historical value or on special surfaces such as railroad construction ballasts.

- Tailored for maximum productivity in detail also: One full tank is normally sufficient for a whole working day, and the high-performance rechargeable battery for the remote control for about two working days.

- All components are designed for high performance and continuous use, and are therefore extremely robust.

- Using the DPU 130 allows the compaction of much greater layer thicknesses than when using a 5.5 t roller. This results in a significantly greater effective surface capacity.

1 The only vibratory plate on the market with a two-part base plate: The hydraulic controller comfortably allows any desired travel maneuvers such as cornering and stationary compaction; stepless speed adjust-ment simultaneously combined with the fastest reaction time.

2 Thanks to infrared remote control, the operator can assume a safe and comfortable working position.

DPU 130

1

2

The vibratory plate with the power of a 7 t roller: DPU 130.



The DPU 130 provides powerful performance on any terrain. Theft protection:

In order to protect the machine against unauthorized use or theft, a PIN number can be created that must be entered before the machine is started up.

High forward travel speed and optimum com-paction performance with just a few passes:

The performance of the DPU 130 beats any 5.5 t roller and allows much greater layer thicknesses to be produced.

Perfect for compacting trenches:

The DPU 130 completes the Wacker Neuson range of remotely controlled units.

(See Page 46 onwards for more information.)

Comfortable to maintain:

The cover of the DPU 130 can simply be swung open. This makes all components optimally accessible.

The performance of a 10 t vibratory roller combined with the maneuverability of a vibratory plate: DPU 100-70 coupling set.

34_35_36 WACKER NEUSON SOIL COMPACTION

COUPLING SET

WITH THREE

DPU 100-70

The most efficient solution for crushed stone compaction in railroad track construction and elsewhere:

- If it's impossible or unprofitable to use large rollers, the coupling set proves its worth.

- The coupling set is made up by connecting three DPU 100-70 vibratory plates. Combining these three power sources provides the astounding performance of a 10 t vibratory roller.

- Extremely high operator safety with infrared remote control. Hand-arm vibration is completely neutralized and the operator is at a safe distance from the machine. This makes the coupling set one of the safest compaction solutions on the market.

- This method allows large areas to be compacted in a cost-effective manner. Structurally critical construction sections which would not bear the weight of a roller are especially well processed by the extreme compaction force of the coupling set.

- Protection of the operator from exhaust fumes and dust.


Coupling setPlate width 87 - 261 cm*


Weight 750 - 2,250 kg*


UNBEATABLE PERFORMANCE, SAFETY AND FLEXIBILITY.

The lifting device makes it possible to load the coupling set in one piece. A fairly large car trailer is all that's needed for transport. A flat bed truck, such as would be required to transport a 10 t vibratory roller is not required.

Strong performance in double or triple array.

The extreme flexibility of the coupling set is also proven by the fact that it can be used as either a single plate, double set or triple set depending on the actual requirements and working conditions, such as the structural stress on a structure or confined working areas.

Modifications require only a few steps and can be car-ried out on site without any particular technical exper-tise, because the machines are not connected to each other either hydraulically or electrically, but with cutting edge infrared technology.

The infrared remote control of the coupling set allows the operator to operate the machine at a considerable distance. This keeps the operator completely safe and free from being exposed to direct risks, such as exhaust fumes, dust formation or hand-arm vibrations.

Ideally suited for railroad construction.

Modifications reserved in the interest of continuous further development.

Technical Data.


Coupling setPlate width 87 - 261 cm*


Weight 750 - 2,250 kg*

TECHNICAL DATA

Double coupling set

Triple coupling set

Dimensions (with extension plates) cm 174 261

Operating weight (without lifting beam) kg 1,540 2,310

Weight lifting beam kg 103 103

Hand-arm vibration m/s2 0 0

Exciter vibrations Hz 56 56

Centrifugal force kN 200 300

Maximum compacted area m2/h 2,957 4,462

Note

Remote control system Line of sight (infrared) Line of sight (infrared)

See the technical data of the DPU 100-70 for more technical data about the base machine.

TECHNICAL DATA

Operating weight kg

WP 1030A

50

WP 1235A

60

WP 1540A

75

WP 1540W

75

Lowest operating height mm 629 606 532 532

Base plate size (W x L) mm 300 x 496 350 x 546 400 x 586 400 x 586

Operating width mm 300 350 400 400

Centrifugal force kN 12 12 15 15

Frequency Hz 98 98 98 98

Max. advance travel (depending on soil and environmental factors) m/min 26 27 29 29

Max. surface capacity (depending on soil and environmental factors) m2/h 468 567 696 696

Max. gradeability (depending on soil and environmental factors) % 30 30 30 30

Drive Air-cooled single cylinder four-cycle gasoline engine

Engine manufacturer Honda Honda Honda Wacker Neuson

Model GX 100 GX 120 GX 160 WM 170

Displacement cm3 98 118 163 169

Max. performance (DIN ISO 3046) kW (HP) 2.1 2.6 3.6 3.7

At speed rpm 3,600 3,600 3,600 3,600

Fuel consumption l/h 0.33 0.8 1.8 1.8

Tank capacity (fuel) l 1.2 2.5 3.7 3.7

Power transmission From drive engine through automatic centrifugal belt drive directly to exciter.

Tank capacity (water) l * * * *

* Water tank available as accessory (see page 64/65)

TECHNICAL DATA

Operating weight kg

WP 1550A

85

WP 1550W

85

WP 2050A

100

WP 2050W

100










Engine manufacturer Honda Wacker Neuson Honda Wacker Neuson

Model GX 160 WM 170 GX 160 WM 170


Max. performance (DIN ISO 3046) kW (HP) 3.6 3.7 3.6 3.7

At speed rpm 3,600 3,600 3,600 3,600




Tank capacity (water) l * * * *


TECHNICAL DATA

Operating weight kg

WPP 1540A

81

WPP 1540W

81

WPP 1550A

86

WPP 1550W

86










Engine manufacturer Honda Wacker Neuson Honda Wacker Neuson

Model GX 160 WM 170 GX 160 WM 170


Max. performance (DIN ISO 3046) kW 3.6 3.7 3.6 3.7

At speed rpm 3,600 3,600 3,600 3,600




Tank capacity (water) l 8 8 9 9


TECHNICAL DATA

Operating weight kg

BPU 2540

144

BPU 2540A

145

DPU 2540H

160

DPU 2550H

166


Machine height (without center pole) mm 647 647 717 717

Working height (center pole in lowest/ highest working position) mm 800 / 1,143 800 / 1,143 800 / 1,143 800 / 1,143


Base plate thickness mm 10 10 10 10






Air-cooled single cylinder diesel engine

Engine manufacturer Wacker Neuson Honda Hatz Hatz

Model WM 170 GX 160 1 B 20 1 B 20


Max. performance (DIN ISO 3046) kW 4.2 4.0 3.4 3.4

At speed rpm 4,000 3,600 3,600 3,600

Operating performance (DIN ISO 3046) kW 1.5 1.5 1.5 1.5

At speed rpm 2,800 2,800 2,800 2,800




TECHNICAL DATA

Operating weight kg

DPU 2560H / DPU 2560H-TS

171

BPU 3050

160

BPU 3050A

166

Base plate size (W x L) mm 600 x 703 500 x 703 500 x 703

Machine height (without center pole) mm 717 697 697

Working height (center pole in lowest/ highest working position) mm 800 / 1,143 800 / 1,143 800 / 1,143

Operating width mm 600 500 500

Base plate thickness mm 10 10 10

Centrifugal force kN 25 30 30

Frequency Hz 90 90 90

Max. advance travel (depending on soil and environmental factors) m/min 19 / 23 21 21

Max. surface capacity (depending on soil and environmental factors) m2/h 684 / 828 630 630

Drive Air-cooled single cylinder diesel engine Air-cooled single cylinder four-cycle gasoline engine

Engine manufacturer Hatz Wacker Neuson Honda

Model 1 B 20 WM 270 GX 270

Displacement cm3 232 270 270

Max. performance (DIN ISO 3046) kW 3.4 6.6 6.6

At speed rpm 3,600 4,000 3,600

Operating performance (DIN ISO 3046) kW 1.5 1.9 1.9

At speed rpm 2,800 2,800 2,800

Fuel consumption l/h 0.4 1.1 1.1

Tank capacity (fuel) l 3.0 6.1 5.0

Power transmission From drive engine through centrifugal clutch and V-belt directly to the exciter.

TECHNICAL DATA

Operating weight kg

DPS 1850H Basic

110

DPS 1850H Vario

108

WPU 1550A

90

Lowest operating height mm 838 838 556



Centrifugal force kN 18 Step 1 Step 2

11 18

15


Max. advance travel (depending on soil and environmental factors) m/min 22

Step 1 Step 2

20 14 29

Max. surface capacity (depending on soil and environmental factors) m2/h 660

Step 1 Step 2

600 420 870

Max. gradeability (depending on soil and environmental factors) % 30 30 30

Drive Air-cooled single cylinder diesel engine Air-cooled single cylinder four-cycle gasoline engine

Engine manufacturer Hatz Hatz Honda

Model 1 B 20 1 B 20 GX 160



At speed rpm 3,600 3,600 3,600




From drive engine through automatic centrifugal belt drive directly to exciter.

Tank capacity (water) l – – 9



TECHNICAL DATA

Operating weight kg

DPU 3050H

181

DPU 3050H electric starter

206

DPU 3060H DPU 3060H-TS

190








Max. advance travel (depending on soil and environmental factors) m/min 21 21 19 / 23

Max. surface capacity (depending on soil and environmental factors) m2/h 630 630 684 / 828

Drive Air-cooled single cylinder diesel engine

Engine manufacturer Hatz Hatz Hatz

Model 1 B 30 1 B 30 1 B 30



At speed rpm 3,600 3,600 3,600


At speed rpm 2,800 2,800 2,800




TECHNICAL DATA

Operating weight kg

DPU 3060H-TS electric starter

215

DPU 3070H

195

DPU 3750H

247








Max. advance travel (depending on soil and environmental factors) m/min 23 18 27

Max. surface capacity (depending on soil and environmental factors) m2/h 825 756 810

Drive Air-cooled single cylinder diesel engine

Air-cooled single cylinder four-cycle diesel engine


Model 1 B 30 1 B 30 1 B 30



At speed rpm 3,600 3,600 3,600


At speed rpm 2,800 2,800 2,800





TECHNICAL DATA

Operating weight kg

DPU 3750HE

265

DPU 3760H

256

DPU 3760HE

274










Drive Air-cooled single cylinder four-cycle diesel engine


Model 1 B 30 1 B 30 1 B 30



At speed rpm 3,600 3,600 3,600


At speed rpm 2,800 2,800 2,800


Tank capacity (fuel) l 5 5 5


TECHNICAL DATA

Operating weight kg

BPU 4045A

308

BPU 5545A

324

DPU 4045YE electric starter

356



Working height (center pole in lowest/ highest working position) mm 1.030 / 1,409 1.030 / 1,409 1.030 / 1,409

Operating width (without/with extension plates) mm 460 / 600 460 / 600 460 / 600






Drive Air-cooled, single-cylinder four-cycle gasoline engine

Air-cooled single cylinder four-cycle diesel engine

Engine manufacturer Honda Honda Yanmar

Model GX 270 GX 390 L70N



At speed rpm 3,600 3,600 3,600


At speed rpm 2,600 2,600 3,000

Fuel consumption l/h 1.6 2 1.4




TECHNICAL DATA

Operating weight kg

DPU 4545H

386

DPU 4545HE

405

DPU 5545H

386



Working height (center pole in lowest/ highest working position) mm 1,023 / 1,405 1,023 / 1,405 1,023 / 1,405









Model 1D42S 1D42S 1D42S


Max. performance (DIN ISO 3046) kW 7 7 7

At speed rpm 3,600 3,600 3,600


At speed rpm 3,000 3,000 3,000




TECHNICAL DATA

Operating weight kg

DPU 5545HE

405

DPU 6555H

459

DPU 6555HE

476



Working height (center pole in lowest/ highest working position) mm 1,023 / 1,405 995 / 1,460 1,038 / 1,417






Max. surface capacity (depending on soil and environmental factors) m2/h 972 1.193 1.193



Model 1D42S 1D81S 1D81S


Max. performance (DIN ISO 3046) kW 7 9.6 9.6

At speed rpm 3,600 3,000 3,000


At speed rpm 3,000 2,880 2,880




TECHNICAL DATA

Operating weight kg

DPU 130

1,170

DPU 100-70

726

Base plate size (W x L) mm 1,186 700 x 1,073

Machine height (without center pole) mm 988 910

Working height (center pole in lowest/ highest working position) mm – 910 / 1,240

Operating width (without/with extension plates) mm 1,200 700 / 757

Base plate thickness mm 14 14


Frequency Hz 58 56

Max. advance travel (depending on soil and environmental factors) m/min 31 30

Max. surface capacity (depending on soil and environmental factors) m2/h 2,232 1,260

Drive Water-cooled four-cylinder naturally aspirated diesel engine

Air-cooled two-cylinder diesel engine with standard electric starter

Engine manufacturer Lombardini Lombardini

Model LDW 1404 12 LD 477-2

Displacement cm3 1,372 954

Max. performance (DIN ISO 3046) kW 24.5 14.8

At speed rpm 3,600 3,000

Operating performance (DIN ISO 3046) kW 16 11.5


Fuel consumption l/h 4 2.6

Tank capacity (fuel) l 18 7.5

Power transmission Dual hydrostatic system, electronically controlled.

From drive engine via gear pump and gear motors to the exciter.

TECHNICAL DATA

Operating weight (without lifting beam / with extension plates) kg

Double coupling set with 2 DPU 100-70

726 / 1,540

Triple coupling set with 3 DPU 100-70

726 / 2,310

Base plate size (W x L) mm 700 x 1,073 (2 x) 700 x 1,073 (3 x)

Machine height (without center pole) mm 910 910

Operating height (adjustable center pole) mm 910 / 1,240 910 / 1,240

Operating width mm 1,760 2,656

Base plate thickness mm 14 14


Frequency Hz 56 56

Max. advance and reverse travel (depending on soil) m/min 30 / 28 30 / 28

Max. surface capacity with standard extension plates (depending on soil) m2/h 2,957 4,462

Drive Air-cooled two-cylinder diesel engine with standard electric starter.

Engine manufacturer Lombardini Lombardini

Model 12 LD 477-2 12 LD 477-2

Displacement cm3 954 (2 x) 954 (3 x)

Max. performance (DIN ISO 3046) kW 14.8 (2 x) 14.8 (3 x)


Operating performance (DIN ISO 3046) kW 11.5 (2 x) 11.5 (3 x)


Fuel consumption l/h 2.6 (2 x) 2.6 (3 x)

Tank capacity (fuel) l 7.5 (2 x) 7.5 (3 x)

Power transmission From drive engine via gear pump and gear motors to the exciter.

Challenging applications require intelligent solutions:

• Remote controlled vibratory plate

• Remote controlled vibratory trench roller

Precise application in trench and ditch construction. With remote controlled machines from Wacker Neuson.

Trench and ditch

compactors46_47 WACKER NEUSON SOIL COMPACTION

Remote controlled vibratory plate with intelligent stand by mode: DPU 7060.


DPU 7060

The vibratory plate with an integrated safety bonus:

- Intelligent stand by mode stops all movements as soon as the operator releases the joystick of the remote control. This improves safety and reduces fuel consumption considerably.

- Safe infrared remote control: If the operator goes below the two meter safety distance or loses visual contact, the vibratory plate will stop automatically.

- The DPU 7060 is the only vibratory plate in its class using efficient V-belt technology. This technology ensures that efficiency remains consistently high, unlike in hydraulically powered machines.

- The vibratory plate switches to idling as soon as the vibration stops being used. This reduces the exhaust fumes load in trenches, saves fuel and keeps noise levels down.

- Variable operating widths with extension plates.

- Low construction height thanks to flat drive engine.

Trench and ditch compactors

DPU 7060Plate width 80 cm*


Weight 615 kg*


Peerless additional safety: The combination of Standby mode and infrared remote control.

Standby mode immediately switches the vibratory plate to idle and stops all movements as soon as the operator standing a few meters away from the plate releases the joystick of the remote control.

1 Innovative infrared remote control that allows the machine to be operated from as far away as 20 meters.

More information about our remote control can be found on Pages 56 - 61.

2 The control panel with an infrared receiver eye is the contact to the remote control. The infrared receiver eye yields to impact.

1

2

Remote controlled articulated vibratory trench rollers: RT 56 and RT 82.


RT 82

Patented articulated joint technology for efficient operation:

- Vibratory trench rollers from Wacker Neuson make changing direction a single simple step.

- They compact right up to the edge without trouble.

- Maneuvering will not disturb already compacted soil.

- Ideally suited for compacting excavations for supply lines and backfilling streets and parking lots.

- First-class machine concept with engine preheat protection and integrated diagnosis toolset.

- The patented low fitting position of the exciters ensure that the centrifugal force is conducted directly into the soil. This provides extremely good compaction performance.

- Compaction performance can be modified to fit different operating requirements: either 34 or 68 kN.

- Two drum widths are available: 56 or 82 cm.


RT 56 RT 82Roller width 56 - 82 cm


Weight 1,391 - 1,473 kg

An invention by Wacker Neuson:ARTICULATED JOINT MAKES CHANGING DIRECTION EASY.

The patented location of the exciters below the central axis of the drums provides a low center of gravity and makes the roller extremely tip-resistant. The low position ensures that the centrifugal forces are conducted directly into the soil, providing very good compaction performance.

The patented articulated joint allows uninterrupted compacting around rounded components without the need for additional compaction on the edge with a rammer. This not only saves time and money, but also provides excellent maneuverability. The rigid articulation leads to a highly tip-resistant machine and provides brilliant handling.

Easily accessible machine components. The hoods of the RT can be opened without dif-ficulty and allow optimal access to components. They are made of highly impact-resistant rust-free, durable material with a high load capacity.

The liquid-cooled diesel engine provides large supply reserves and is extremely accessible.

Details of the vibratory trench rollers, which convince:

52_53 WACKER NEUSON SOIL COMPACTION Trench and ditch compactors

Innovative infrared remote control for the greatest possible safety.

This innovative, practical control facility makes working with Wacker Neuson vibratory trench rollers extremely flexible, as well as very safe thanks to the proximity recognition sensor with automatic switch-off. More information about the Wacker Neuson remote control can be found on Pages 56-61.

Thanks to its proximity recognition sensor the vibratory trench roller will stop immediately if the safety distance between the operator and the machine is less than two meters. More information is available on pages 56-61.

The link to the remote control: The infrared receiver eye.

If the operator loses contact with the infrared receiver eye, the vibratory trench roller will stop all movement and compaction. If the inclination angle is too steep, the integrated tilt sensor will also switch off the roller.

All engine functions at a glance.

The diagnosis LED displays of the engine control unit simplify operation and troubleshooting by monitoring different engine functions: oil pressure, radiator fluid level, engine temperature, glow plug, battery, tilt angle and air filter capacity.


TECHNICAL DATA DPU 7060F DPU 7060F t RT 56-SC RT 82-SC

Operating weight (without/with extension plates) kg 584 / 615 588 / 619 1.391 1.473

Total dimensions (L x W x H) mm 1,250 x 860 x 1,000 1,250 x 860 x 1,000 1,855 x 560 x 1,230 1,855 x 820 x 1,230

Operating width (without/with extension plates) mm 630 / 800 630 / 800 – –

Machine height mm 795 795 – –

Drum diameter mm – – 520 520

Drum width mm – – 560 820

Base plate thickness mm 14 14 – –

Centrifugal force (min / max) kN 70 70 34.2 / 68.4 34.2 / 68.4

Frequency Hz 56 56 41.7 41.7

Static linear load/drum N/mm – – 14 9.6

Dynamic linear load/drum N/mm – – 69 45.3

Travel speed (min / max) m/min – – 20 / 40 20 / 40

Turning radius (inside) mm – – 1,860 1,600

Max. advance and reverse travel (depending on soil) m/min 25 25 – –

Max. surface capacity (depending on soil) m2/h 1,200 1,200 668 972

Max. gradeability (without / with vibration) % 40 40 50 / 45 50 / 45

Drive Air-cooled single cylinder diesel engine with electric starter and automatic low oil shutoff

Liquid-cooled three-cylinder diesel engine with electric starter

Engine manufacturer Farymann Farymann Lombardini Lombardini

Displacement cm3 709 709 1,028 1,028

Model 43 F 43 F – –

Max. performance (DIN ISO 3046) kW (HP) 11.0 (14.8) 11.0 (14.8) 15.6 (21.0) 15.6 (21.0)

At speed rpm 3,000 3,000 – –

Operating performance (DIN ISO 3046) kW (HP) 9.0 (12.1) 9.0 (12.1) 13.5 (18.0) 13.5 (18.0)

At speed rpm 2,500 2,500 2,600 2,600



Max. permissible tilt ° 15.0 15.0 – –

Power transmission From drive engine through automatic centrifugal belt drive directly to the exciter

– –

Technical Data.

Wacker Neuson's innovative remote control technology primarily provides:

More safety during construction. And thanks to its sophisticated technical details, three machines of the same type can be operated simultaneously by three operators without leading to radio contact problems. Intelligent remote controls are available for different machine groups from Wacker Neuson:

• For the RT 56 and RT 82 vibratory trench rollers

• For the vibratory plates DPU 7060 and DPU 130

• For the coupling set of the DPU 100-70

Wacker Neuson's innovative safety concept. Good for your construction site. Ideal for every operator.

Safety


Safety in use: Thanks to the innovative remote control. From Wacker Neuson.


Suitable for

DPU 7060* DPU 100-70 coupling set* DPU 130* RT 56* RT 82*

This remote control with added safety is a welcome sight on every construction site:

- Optimal safety concept: The machine stops as soon as the operator lets go of the joystick or the machine comes closer than two meters from the operator.

- Intuitive operation with a magnetic joystick.

- 16 adjustable channels for communication between the operator and the machine. Channels can be selected quickly and easily with a switch on the remote control.

- Three machines of the same model can be controlled by three different operators at the same time without any interference.

- The remote control can be used and programmed for different machines. Contact us if you would like more information.

- Long-life, high-performance NIMH batteries provides long operating periods.

- The batteries can also be charged while the machine is operating using the charging cable. The proximity recognition sensor remains active in this operating mode.

- Complies fully with Eurocode EN 500 Section 4 Appendix B.

58_59 WACKER NEUSON SOIL COMPACTION * Each remote control is individually tailored to fit the functions of the machine.

2 m

The machine will stop automatically, if the operator enters the safety circle of two meters.

The wide transmitting field of up to 20 m and an angle of up to 45° provides excellent comfort at work.

Moisture resistance due to magnetic joystick.

Thanks to their magnetic operation, the joysticks are integrated into the remote control in such a way that no moisture can enter the individual technical components. This makes them wear-free and always ready for use.

The batteries reload quickly with the high performance charger.

Range in m


Suitable for

DPU 7060* DPU 100-70 coupling set* DPU 130* RT 56* RT 82*


Guaranteed safety thanks to the intelligent proximity recognition sensor:

The proximity recognition sensor reacts as soon as the machine comes within two meters of the operator. It ensures that the machine stops immediately. For safety reasons the machine also stops as soon as the operator lets go of the joystick.

THE BEST

SAFETY CONCEPT

ON THE MARKET.

* Each remote control is individually tailored to fit the functions of the machine.

Compaction machines from Wacker Neuson stand out thanks to their unbeatable flexibility.

They provide perfect results even in difficult working conditions or confined areas. With accessories from Wacker Neuson, compaction machines can be more flexibly adjusted thanks to sprinkler systems, transport devices or paving pads.

Equipped for all requirements: Wacker Neuson's accessories.

Accessories


The right accessories for every application.

64_65 WACKER NEUSON SOIL COMPACTION Accessories

The self-explanatory model guide: available not available

Wa

ter

tan

k

(l) Se

t o

f e

xte

nsi

on

pla

tes

in d

iffe

ren

t w

idth

s

Tra

nsp

ort

de

vic

e

Pa

vin

g p

ad

ACCESSORIES FOR VIBRATORY PLATESWP 1030A 8

WP 1235A 8

WP 1540A 9

WP 1540W 9

WP 1550A 9

WP 1550W 9

WP 2050A 9

WP 2050W 9

WPP 1540A 8

WPP 1540W 8 Integrated

WPP 1550A 9 Integrated

WPP 1550W 9 Integrated

WPU 1550A 9 Integrated

BPU 2540 Integrated

BPU 2540A Integrated

DPU 2540H Integrated


DPU 2560H / DPU 2560-TS Integrated

BPU 3050 Integrated

BPU 3050A Integrated


DPU 3050HE Integrated

DPU 3060H / DPU 3060H-TS Integrated

DPU 3060H-TSE Integrated






BPU 4045A

BPU 5545A

DPU 4045YE

DPU 4545H

DPU 4545HE

DPU 5545H

DPU 5545HE

DPU 6555H

DPU 6555HE

DPU 100-70

DPU 130

Wacker Compaction Plates.pdf

Documents

Transcript of Wacker Compaction Plates.pdf