VX series

1,600kg, 1,800kg and 2,000kgDiesel and LP Gas Forklift Trucks• IntellixTM Vehicle Management System with CANbus technology• 2 application matched transmissions, including the World’s best hydrodynamic transmission - the Yale TechtronixTM

• ADS - Auto Deceleration System and Anti Roll Back on TechtronixTM 100 transmission• AccuTouchTM minilevers and manual levers• Superelastic and pneumatic radial tyres

2

Truck Dimensions

OptionslPowertrain protection systemlPremium monitoring packagelHigh air intake with pre-cleanerlAccumulatorlKeyless start (with auxiliary key switch)l Traction speed limiterlHeavy-duty “Combi Cooler” radiatorlSwing-out, drop-down EZ-Tank bracketlReturn-to-set tiltlSwivel full suspension seatl Foot directional controll Ful or partial cabinslOperator passwordlAlarm-reverse lAmber strobe light - continuous activatedl Impact monitorl Load weight indicator

Engine Specifications MastsYanmar TNE series - Diesel Base, Value 4 Cylinder Overhead camshaftDisplacement 2659cc Power 29.1kW @ 2,400rpmTorque 146Nm @ 2,400rpmAir Filtration 2 stage, dry typeIDI fuel injection systemPSI, LPG Base, Value 4 Cylinder Overhead camshaftDisplacement 1997cc Power 33.0kW @ 2,400rpmTorque 136Nm @ 2,300rpmAir Filtration 2 stage, dry type

A full range of Yale 2-stage LFL and 2-stage and 3-stage FFL masts are available.

Yale masts are designed for maximum visibility, with widely spaced channels, lift chains and main lift cylinders.

4.5h4

4.4h3

4.2h1

4.3h2

4.22s

4.1a

4.22l 1.8x

1.8x

4.19l1

l6

1.9y

4.20l2

4.20l2

4.12h10

1.6c

4.8h7

4.7h6

4.32m24.31m1

4.21b1

b124.36b13

4.34.1/4.34.2Ast

100mma2 100mm a

2

b

4.35

Wa

Q

b

3

GDP/GLP 16VX, GDP/GLP 18VX Mast details and capacity ratings (kg) - Superelastic tyres

GDP/GLP 16VX, GDP/GLP 18VX Mast details and capacity ratings (kg) - Radial tyres

GDP/GLP 20SVX Mast details and capacity ratings (kg) - Superelastic tyres

GDP/GLP 20SVXS Mast details and capacity ratings (kg) - Superelastic tyres

h1 (mm)

h1 (mm)

h1 (mm)

h1 (mm)

h2+s (mm)

h2+s (mm)

h2+s (mm)

h2+s (mm)

h3+s (mm)

h3+s (mm)

h3+s (mm)

h3+s (mm)

h4 (mm)

h4 (mm)

h4 (mm)

h4 (mm)

Tilt

Tilt

Tilt

Tilt

F

F

F

F

B

B

B

B

Mast

Mast

Mast

Mast

2 Stage LFL

2 Stage LFL

2 Stage LFL

2 Stage LFL

2 Stage FFL

2 Stage FFL

2 Stage FFL

2 Stage FFL

3 Stage FFL

3 Stage FFL

3 Stage FFL

3 Stage FFL

ModelTyre size, front Overall width, front

ModelTyre size, front Overall width, front

ModelTyre size, front Overall width, front

ModelTyre size, front Overall width, front

** With intermediate width tread drive tyres (1108 mm width)- must be specified. h2 & h4 are less loadbackrest.

* With intermediate width tread drive tyres (1108 mm width)- must be specified. ** with wide tread width tread drive tyres (1240 mm width)- must be specified. h2 & h4 are less loadbackrest.

** With intermediate width tread drive tyres (1108 mm width)- must be specified. h2 & h4 are less loadbackrest.

* With intermediate width tread drive tyres (1108 mm width)- must be specified. ** with wide tread width tread drive tyres (1240 mm width)- must be specified. h2 & h4 are less loadbackrest.

GLP/GDP 16 VX6.50 x 101072mm

GLP/GDP 16 VX6.50 x R101072mm

GLP/GDP 16 SVX6.50 x 101072mm

GLP/GDP 20 SVX6.50 x 101072mm

GLP/GDP 18 VX6.50 x 101072mm

GLP/GDP 18 VX6.50 x R101072mm

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

ForksLoad centre (kg)

500

500

500

500

500

500

500

500

500

500

500

500

600

600

600

600

600

600

600

600

600

600

600

600

700

700

700

700

700

700

700

700

700

700

700

700

ISS & FPLoad centre (kg)

ISS & FPLoad centre (kg)

ISS & FPLoad centre (kg)

ISS & FPLoad centre (kg)

ISS & FPLoad centre (kg)

ISS & FPLoad centre (kg)

217524252775

2125

202521752425

217524252775

2125

202521752425

217524252775

2125

202521752425

217524252775

2125

202521752425

140140140

1551

145616061856

140140140

1551

145616061856

140140140

1551

145616061856

140140140

1551

145616061856

333038304330

3215

445049005500

333038304330

3215

445049005500

333038304330

3215

445049005500

333038304330

3215

445049005500

390644064906

3792

501954696069

390644064906

3792

501954696069

390644064906

3792

501954696069

390644064906

3792

501954696069

160016001600

1600

15701490

1370**

160016001600

1600

1570* 1490** 1290**

200020001940

2000

19101820

1560**

200020001940*

2000

1690*1370*1040*

180018001740

1800

17401650

1490**

180018001740

1800

1740** 1650** 1310**

156015501550

1550

15001410

1290**

156015501550

1550

1500* 1410** 1280**

188018701810

1870

17901700

1560**

18801870

1810*

1870

1670* 1370* 1040*

167016601600

1680

16001510

1380**

167016601600

1680

1600** 1510** 1310**

142014101400

1410

13601280

1170**

142014101400

1410

1360* 1280** 1160**

170017001640

1700

16301540

1420**

17001700

1640*

1700

1630* 1370* 1040*

151015101450

1520

14501370

1250**

151015101450

1520

1450** 1370** 1250**

160016001600

1600

157014801310

160016001600

1600

1570* 1480** 1280**

197019601900

1970

18801790

1560**

19701960

1900*

1970

1670*1350*1010*

175017401680

1760

16801590

1440**

175017401680

1760

1660* 1580** 1290**

148014701460

1470

141013301220

148014701460

1470

1410* 1330** 1210**

178017701720

1780

17001610

1480**

17801770

1710*

1780

1660* 1350* 1010*

158015701520

1590

15101430

1310**

158015701520

1590

1510* 1430** 1290**

135013401330

1340

129012201110

135013401330

1340

1290* 1210** 1100**

162016101560

1620

15501470

1350**

16201610

1560*

1620

1550* 1340* 1010*

144014301380

1450

13801300

1190**

144014301380

1450

1380* 1300** 1190**

666

6

666

666

6

666

666

6

666

666

6

666

555

5

333

555

5

333

555

5

333

555

5

333

VX series64

VDI 2198 - General Specifications, Diesel powered GDP 16VX, GDP 18VX, GDP 20SVXD

istin

guis

hing

mar

kW

eigh

tsTy

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a C

ombu

stio

n en

gine

Add

ition

dat

a

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.33

4.34

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.7.2

10.8

s Top of forks. : Without load backrest.m h6 subject to +/- 5 mm tolerance. 8 Full suspension seat in depressed position.w Add 32mm with load backrest.

n Standard / Intermediate / Wide. q Wide tread not available on GLP20SVX.* @ 1.6km/h. Drawbar pull performance figure is only indicative for comparison purpose. These performances are only possible for a short period of time.

** @ 4.8km/h. Gradeability figures are provided for comparison of tractive performance, but are not intended to endorse the operation of the vehicle on the stated inclines. Follow instructions in the operating manual regarding operation on inclines.

v Variable.H LPAZ, Measured according to the test cycles and based on the weighting values contained in EN12053.

GDP 16VXYale

Yanmar 2.6LStandard Electronic, 1-Speed

BaseDrum brakesDieselSeated1.6500384138530593856 / 5651521 / 1538SE6.50 x 10-105.00 x 82x /28908956 / 521751003290390521491043321323622361068 / 1108 / 123840 x 80 x 1000IIA9771101461000 x 12003539353937391955584183069137120.4 / 20.90.64 / 0.720.51 / 0.4712390 / 747021.6 / 29.0TBDHydraulicYanmar 4TNE9229.124004 / 26592.86Hydrodynamic0 - 1556931.738.47999102Pin

Manufacturer (abbreviation)Manufacturer’s type designation

Engine / transmission

ModelBrake TypeDrive: electric (battery or mains), diesel, petrol, LPGOperator type: hand, pedestrian, standing, seated, order-pickerRated capacity/rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weightAxle loading laden, front/rearAxle loading unladen, front/rearTyres: P=pneumatic, V=cushion, SE=superelastic Tyre size, frontTyre size, rearWheels, number front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast / fork carriage forward / backwardHeight, mast loweredFree lift sLift sHeight, mast extended :Height of overhead guard (cabin) mSeat height relating to SIP/stand height 8Coupling heightOverall lengthLength to face of forksOverall width nFork dimensions DIN ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width wGround clearance, laden, below mastGround clearance, centre of wheelbaseLoad dimension b12 × l6 crosswaysAisle width predetermined load dimensionsAisle width for pallets 1000 × 1200 crosswaysAisle width for pallets 800 × 1200 lengthwaysTurning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed, laden/unladen Lift speed, laden/unladenLowering speed, laden/unladenDrawbar pull, laden/unladen *Gradeability, laden/unladen **Acceleration time, laden/unladenService brakeEngine manufacturer / typeEngine power according to ISO 1585Rated speedNumber of cylinders/displacementFuel consumtion according to VDI cycle Type of drive unitOperating pressure for attachmentsOil volume for attachments vHydraulic oil tank, capacityFuel tank, capacitySound pressure level at the driver’s seat HSound power level during the workcycle uGuaranteed sound power 2000/14/ECTowing coupling type

Q (t)c (mm)x (mm)y (mm)kgkgkg

b10 (mm)b11 (mm)a / b (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)h7 (mm)h110 (mm)l1 (mm)l2 (mm)b1 (mm)s/e/l (mm)

b3 (mm)m1 (mm)m2 (mm)b12 x l6 (mm)Ast (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/sm/sN%s

kWmin-1(-)/cm3 l/h or kg/h

barl/minlitreslitresdB(A)dB(A)dB(A)

Yale

Yanmar 2.6LTechtronix 100, 1-Speed

BaseADS Drum brakesDieselSeated1.6500384138530593856 / 5651521 / 1538SE6.50 x 10-105.00 x 82x /28908956 / 521751003290390521491043321323622361068 / 1108 / 123840 x 80 x 1000IIA9771101461000 x 12003539353937391955584183069137120.4 / 20.90.64 / 0.720.51 / 0.4712390 / 747021.6 / 29.0TBDHydraulicYanmar 4TNE9229.124004 / 26592.86Hydrodynamic0 - 1556931.738.47999102Pin

75

VDI 2198 - General Specifications, Diesel powered GDP 16VX, GDP 18VX, GDP 20SVX

Dis

tingu

ishi

ng m

ark

Wei

ghts

Tyre

s/ch

assi

sD

imen

sion

s P

erfo

rman

ce d

ata

Com

bust

ion

engi

neA

dditi

on d

ata

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.33

4.34

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.7.2

10.8

GDP 18VX GDP 20SVX

u LWAZ, measured according to the test cycles and based on the weighting values contained in EN12053.

Yale

Yanmar 2.6LStandard Electronic, 1-Speed

BaseDrum brakesDieselSeated1.8500384138531344190 / 5091506 / 1628SE6.50 x 10 -105.00 x 82x /28908956 / 521751003290390521491043321323622361068 / 1108 / 123840 x 80 x 1000IIA9771101461000 x 12003539353937391955584183069137120.4 / 20.90.63 / 0.720.51 / 0.4712260 / 720020.0 / 26.3TBDHydraulicYanmar 4TNE9229.124004 / 26592.96Hydrodynamic0 - 1556931.738.47999102Pin

Yale

Yanmar 2.6LTechtronix 100, 1-Speed

BaseADS Drum brakesDieselSeated1.8500384138531344190 / 5091506 / 1628SE6.50 x 10 -105.00 x 82x /28908956 / 521751003290390521491043321323622361068 / 1108 / 123840 x 80 x 1000IIA9771101461000 x 12003539353937391955584183069137120.4 / 20.90.63 / 0.720.51 / 0.4712260 / 720020.0 / 26.3TBDHydraulicYanmar 4TNE9229.124004 / 26592.96Hydrodynamic0 - 1556931.738.47999102Pin

Yale

Yanmar 2.6LStandard Electronic, 1-Speed

BaseDrum brakesDieselSeated2.0500384138532944460 / 5801465 / 1829SE6.50 x 10 -1018 x 7-82x /28908956 / 521751003290390521491043321326822681068 / 1108 / q40 x 100 x 1000IIA9771101461000 x 12003569356937691985584185569137120.4 / 20.90.62 / 0.720.51 / 0.4712140 / 693017.9 / 23.6TBDHydraulicYanmar 4TNE9229.124004 / 26593.11Hydrodynamic0 - 1556931.738.47999102Pin

Yale

Yanmar 2.6LTechtronix 100, 1-Speed

BaseADS Drum brakesDieselSeated2.0500384138532944460 / 5801465 / 1829SE6.50 x 10 -1018 x 7-82x /28908956 / 521751003290390521491043321326822681068 / 1108 / q40 x 100 x 1000IIA9771101461000 x 12003569356937691985584185569137120.4 / 20.90.62 / 0.720.51 / 0.4712140 / 693017.9 / 23.6TBDHydraulicYanmar 4TNE9229.124004 / 26593.11Hydrodynamic0 - 1556931.738.47999102Pin

Specification truck based on: 3330mm top of forks 2 stage LFL mast with standard carriage, 1000mm forks and e-hydraulics.

VX series66

VDI 2198 - General Specifications, LPG powered GLP 16VX, GLP 18VX, GLP 20SVXD

istin

guis

hing

mar

kW

eigh

tsTy

res/

chas

sis

Dim

ensi

ons

Per

form

ance

dat

a C

ombu

stio

n en

gine

Add

ition

dat

a

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.33

4.34

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.7.2

10.8

s Top of forks. : Without load backrest.m h6 subject to +/- 5 mm tolerance. 8 Full suspension seat in depressed position.w Add 32mm with load backrest.

n Standard / Intermediate / Wide q Wide tread not available on GLP20SVX.* @ 1.6km/h. Drawbar pull performance figure is only indicative for comparison purpose. These performances are only possible for a short period of time.

** @ 4.8km/h. Gradeability figures are provided for comparison of tractive performance, but are not intended to endorse the operation of the vehicle on the stated inclines. Follow instructions in the operating manual regarding operation on inclines.

v Variable.H LPAZ, Measured according to the test cycles and based on the weighting values contained in EN12053.

GLP 16VXYale

PSI 2.0LStandard Electronic, 1-Speed

BaseDrum brakesLPGSeated1.6500384138530593856 / 5651521 / 1538SE6.50 x 10-105.00 x 82x /28908956 / 521751003290390621491043321323622361068 / 1108 / 123840 x 80 x 1000IIA9771101461000 x 12003539353937391955584183069137121.1 / 21.50.58 / 0.600.51 / 0.4713226 / 747019.2 / 29.04.6 / 3.9HydraulicPSI 2.0L33.024004 / 19972.35Hydrodynamic0 - 1555631.715.27796101Pin

Manufacturer (abbreviation)Manufacturer’s type designation

Engine / transmission

ModelBrake TypeDrive: electric (battery or mains), diesel, petrol, LPGOperator type: hand, pedestrian, standing, seated, order-pickerRated capacity/rated loadLoad centre distanceLoad distance, centre of drive axle to forkWheelbaseService weightAxle loading laden, front/rearAxle loading unladen, front/rearTyres: P=pneumatic, V=cushion, SE=superelastic Tyre size, frontTyre size, rearWheels, number front/rear (x = driven wheels)Tread, frontTread, rearTilt of mast / fork carriage forward / backwardHeight, mast loweredFree lift sLift sHeight, mast extended :Height of overhead guard (cabin) mSeat height relating to SIP/stand height 8Coupling heightOverall lengthLength to face of forksOverall width nFork dimensions DIN ISO 2331Fork carriage ISO 2328, class/type A, BFork carriage width wGround clearance, laden, below mastGround clearance, centre of wheelbaseLoad dimension b12 × l6 crosswaysAisle width predetermined load dimensionsAisle width for pallets 1000 × 1200 crosswaysAisle width for pallets 800 × 1200 lengthwaysTurning radiusInternal turning radius90° intersecting aisle (with pallet W = 1200mm, L = 1000mm)Step height (from ground to running board)Step height (between intermediate steps between running board and floor)Travel speed, laden/unladen Lift speed, laden/unladenLowering speed, laden/unladenDrawbar pull, laden/unladen *Gradeability, laden/unladen **Acceleration time, laden/unladenService brakeEngine manufacturer / typeEngine power according to ISO 1585Rated speedNumber of cylinders/displacementFuel consumtion according to VDI cycle Type of drive unitOperating pressure for attachmentsOil volume for attachments vHydraulic oil tank, capacityFuel tank, capacitySound pressure level at the driver’s seat HSound power level during the workcycle uGuaranteed sound power 2000/14/ECTowing coupling type

Q (t)c (mm)x (mm)y (mm)kgkgkg

b10 (mm)b11 (mm)a / b (o)h1 (mm)h2 (mm)h3 (mm)h4 (mm)h6 (mm)h7 (mm)h110 (mm)l1 (mm)l2 (mm)b1 (mm)s/e/l (mm)

b3 (mm)m1 (mm)m2 (mm)b12 x l6 (mm)Ast (mm)Ast (mm)Ast (mm)Wa (mm)b13 (mm)(mm)(mm)(mm)km/hkm/sm/sN%s

kWmin-1(-)/cm3

l/h or kg/h

barl/minlitreskgdB(A)dB(A)dB(A)

Yale

PSI 2.0LTechtronix 100, 1-Speed Value

ADS Drum brakes LPGSeated1.6500384138530593856 / 5651521 / 1538SE6.50 x 10-105.00 x 82x /28908956 / 521751003290390621491043321323622361068 / 1108 / 123840 x 80 x 1000IIA9771101461000 x 12003539353937391955584183069137121.1 / 21.50.58 / 0.600.51 / 0.4713226 / 747019.2 / 29.04.6 / 3.9HydraulicPSI 2.0L33.024004 / 19972.35Hydrodynamic0 - 1555631.715.27796101Pin

77

VDI 2198 - General Specifications, LPG powered GLP 16VX, GLP 18VX, GLP 20SVX

Dis

tingu

ishi

ng m

ark

Wei

ghts

Tyre

s/ch

assi

sD

imen

sion

s P

erfo

rman

ce d

ata

Com

bust

ion

engi

neA

dditi

on d

ata

1.1

1.2

1.3

1.4

1.5

1.6

1.8

1.9

2.1

2.2

2.3

3.1

3.2

3.3

3.5

3.6

3.7

4.1

4.2

4.3

4.4

4.5

4.7

4.8

4.12

4.19

4.20

4.21

4.22

4.23

4.24

4.31

4.32

4.33

4.34

4.34.1

4.34.2

4.35

4.36

4.41

4.42

4.43

5.1

5.2

5.3

5.5

5.7

5.9

5.10

7.1

7.2

7.3

7.4

7.5

8.1

10.1

10.2

10.3

10.4

10.7

10.7.1

10.7.2

10.8

GLP 18VX GLP 20SVX

u LWAZ, measured according to the test cycles and based on the weighting values contained in EN12053.

Yale

PSI 2.0LStandard Electronic, 1-Speed

BaseDrum brakesLPGSeated1.8500384138531344190 / 5091506 / 1628SE6.50 x 10 -105.00 x 82x /28908956 / 521751003290390621491043321323622361068 / 1108 / 123840 x 80 x 1000IIA9771101461000 x 12003539353937391955584183069137121.1 / 21.50.58 / 0.600.51 / 0.4713188 / 720018.0 / 26.34.7 / 4.0HydraulicPSI 2.0L33.024004 / 19972.42Hydrodynamic0 - 1555631.715.27796101Pin

Yale

PSI 2.0LTechtronix 100, 1-Speed

ValueADS Drum brakesLPGSeated1.8500384138531344190 / 5091506 / 1628SE6.50 x 10 -105.00 x 82x /28908956 / 521751003290390621491043321323622361068 / 1108 / 123840 x 80 x 1000IIA9771101461000 x 12003539353937391955584183069137121.1 / 21.50.58 / 0.600.51 / 0.4713188 / 720018.0 / 26.34.7 / 4.0HydraulicPSI 2.0L33.024004 / 19972.42Hydrodynamic0 - 1555631.715.27796101Pin

Yale

PSI 2.0LStandard Electronic, 1-Speed

BaseDrum brakesLPGSeated2.0500384138532944460 / 5801465 / 1829SE6.50 x 10 -1018 x 7-82x /28908956 / 521751003290390621491043321326822681068 / 1108 / q40 x 100 x 1000IIA9771101461000 x 12003569356937691985584185569137121.1 / 21.50.58 / 0.600.51 / 0.4713135 / 693016.6 / 23.64.8 / 4.1HydraulicPSI 2.0L33.024004 / 19972.52Hydrodynamic0 - 1555631.715.27796101Pin

Yale

PSI 2.0LTechtronix 100, 1-Speed

ValueADS Drum brakesLPGSeated2.0500384138532944460 / 5801465 / 1829SE6.50 x 10 -1018 x 7-82x /28908956 / 521751003290390621491043321326822681068 / 1108 / q40 x 100 x 1000IIA9771101461000 x 12003569356937691985584185569137121.1 / 21.50.58 / 0.600.51 / 0.4713135 / 693016.6 / 23.64.8 / 4.1HydraulicPSI 2.0L33.024004 / 19972.52Hydrodynamic0 - 1555631.715.27796101Pin

Specification truck based on: 3330mm top of forks 2 stage LFL mast with standard carriage, 1000mm forks and e-hydraulics.

NACCO Materials Handling Limited trading as Yale Europe Materials Handling Centennial House, Frimley Business Park, Frimley, Surrey GU16 7SG, United Kingdom. Tel: +44 (0) 1276 538500 Fax: +44 (0) 1276 538559

www.yale-forklifts.euCountry of Registration: England. Company Registration Number: 02636775

Safety. This truck conforms to the current EU requirements. Specification is subject to change without notice.

Yale, VERACITOR and are registered trademarks. “PEOPLE, PRODUCTS, PRODUCTIVITY”, PREMIER, Hi-Vis, and CSS are trademarks in the United States and certain other jurisdictions. MATERIALS HANDLING CENTRAL and MATERIAL HANDLING CENTRAL are Service Marks in the United States and certain other jurisdictions. is a Registered Copyright. © Yale Europe Materials Handling 2015. All rights reserved.

Truck shown with optional equipment

Printed in The United Kingdom (0415HG) EN. Publication part no. 290000126 Rev.09

VX series

Yale Veracitor VX Series This series of trucks is available in two configurations.The Veracitor Base truck offers first-rate performance for standard-duty applications and is geared to minimise cost of acquisition without compromising performance.The Veracitor Value truck provides excellent performance for standard and medium-duty applications and is optimised for lowest hourly cost of operation.Engines Engines feature a rigid cast iron block and main bearing caps.Hydraulic valve lifters eliminate the need for manual adjustment. All engines include hardened exhaust valve seats.Fuel System The PSI LPG engine has an air valve carburettor which works in conjunction with the electronic pressure regulator and Engine ECU to provide the precise air fuel ratio required. The Yanmar fuel system has an Electromechanical controlled throttle providing excellent response time. Super quick glow plugs allow the engine to start quickly and reliably under cold conditions, the cold start device delivers a cleaner exhaust under cold conditions by advancing the fuel injection timing based on water temperature. Emissions have been reduced by controlling fuel injection timing according to engine load. Transmission Two transmission selections are available with engine configurations that will fulfil a wide variety of material handling applications.1) Standard Electronic features electronic inching, electric shift control, neutral start switch, and anti-restart protection and heavy duty clutch packs. A single pedal controls both inching and braking.2) The TechtronixTM 100 has all the Standard Electronic features plus an Auto Deceleration System.

Autospeed Hydraulics With optional Auto-Speed Hydraulics the engine speed is automatically increased to provide full hydraulic power. The Pacesetter VSM maintains the current travel speed (or prevents travel) until the operator steps on the accelerator. No operator inching is required and productivity and efficiency is increased by simplifying operator actions. Cooling System The cooling system employs a 43cm blade pusher- type fan. A permanently lubricated water pump and a high capacity, crossflow radiator ensure rapid heat dissipation. The sealed cooling system operates at 15 psi, the coolant recovery tank allows visual inspection of coolant level. A transmission oil cooler is integrated into the radiator and is located in the side tank. The radiator is softmounted for durability.Drive Axle The drive axle is designed to withstand heavy-duty applications and absorb shock loads. It is a “self contained” assembly isolated from the transmission by a heavyduty rubber isolator. The axle shafts utilize a “rolled fillet” root spline design for increased resistance to torsion stress. A magnetic sump plug collects any metal particles circulating in the axle oil to prevent component wear.Brakes Brakes are duo-servo hydraulic, selfenergizing, and automatic adjusting drum brake assemblies. Asbestos-free brake linings are bonded to steel shoes and act against a cast iron drum. Single circuit master cylinder has sealed fluid reservoir and features a fluid level sensor which activates an indicator light located on the instrument panel.Hydraulic Power Steering Hydrostatic steering provides responsive control and eliminates mechanical linkages for reduced surface shock and simplified maintenance. The steering wheel is 30cm in diameter with a textured surface grip and spinner knob, and requires only four turns lock-to-lock. The centre mounted steer cylinder is located within the confines of the steer axle for protection.

Steer Axle Constructed from cast steel, the steer axle is rubber shock mounted to the frame for reduced wear and vibration. The CSE (Continuous Stability Enhancement) system enhances lateral truck stability through reduced steer axle articulation, while simultaneously allowing uncompromised uneven surface travel.Operator’s Compartment Base truck features cowl mounted hydraulic control levers positioned on the right side of the steering column.Value trucks feature AccuTouchTM electrohydraulic controls integrated into the operator’s right-side armrest for superior ergonomic actuation. Automotive-style pedal arrangement with a large, single inch/brake pedal is standard. Intellix Vehicle System Management (VSM VSM acts as a master truck controller, providing extensive monitoring and control of truck functions and systems. CANbus technology reduces wiring complexity and enables communications between truck systems. The ergonomically positioned dash display transmits continual feedback to the operator and allows communication of service codes.On-board diagnostics enable quick and easy troubleshooting. The electrical system features sealed connectors and Hall Effect sensors for superior dependability.Hydraulic System Hydraulic system incorporates a gear type pump with cast iron body for quiet efficiency. System is protected from overloads by a main relief valve for the lift circuit and secondary relief valve for tilt and auxiliary functions. Oil is double filtered through a 100 mesh suction line strainer and 10 micron return line filter.Hydraulic tank is integrated into the frame. For AccuTouchTM electrohydraulic controls, an emergency lowering valve is provided to allow the load to be lowered in the event of power loss. O-ring face seal fittings are used in all high pressure hydraulic connections.

Models: GDP/GLP 16VX, 18VX, 20SVX