Voltage/Continuity Loop Calibrator TesterVoltage/Continuity Tester Loop Calibrator FEATURES Audible...

Voltage/Continuity Tester Loop Calibrator FEATURES ● Audible and optic continuity test. ● Audible and optic voltage check. ● Voltage protection : 600V ● Robust and ergonomic housing. ● For checking electric light bulbs, securings, wirings and so on. ● Application : resistor, voltage, semiconductor, capacitor and so on. SPECIFICATIONS Continuity 0~500kΩ Test current about 5uA Test voltage Less than 9V Voltage protection 50~600V (AC/DC) Operating temperature 0℃ to 40℃ Storage temperature -10℃ to 50℃ Dimensions 115(L) x 74(W) x 27(D)mm Weight (battery included) Approx. 178g Power source 9V(6F22) x 1 Safety standard EN 61010-1 CAT III 600V EN 61010-2-030 EN 61326-1 Accessories Instruction manual Red alligator clip Test probe (Red and Black) Battery FEATURES ● 4-20mA (1kΩ load, 24V Loop Supply). ● 0.025% Basic Accuracy. ● Simple Operation Interface. ● Auto Ramp and Step Functions. ● 0-20mA, 0-24mA selectable. ● Incremental percentage setting : 0-100%. ● Warning beeper when output is open. ● 0-24 V output. ● The minimum load of 20kΩ on voltage mode. SPECIFICATIONS (25ºC±5ºC,≤85%R.H.) DC Current (1kΩ Max Load, 24v Loop Supply) Range 0-4mA / 4-20mA / 20-24mA Resolution 1uA Accuracy ±0.025%±10uA / ±0.025%±5uA / ±0.025%±5uA Beeper warning when output circuit is open and speciﬁed output voltage > 24V. DC Voltage (Approx. 10MΩ load) Range 0-4V / 4-20V / 20-24V Resolution 1mV Accuracy ±0.05%±10mV / ±0.05%±5mV / ±0.05%±5mV Beeper warning when voltage is short and speciﬁed output current is > 24mA. General Power consumption 150mA at 24V 1kΩ load Operating temperature 0º C - 40º C Operating humidity ≤ 80% R.H. Storage temperature -10º C - 50º C Storage humidity ≤ 85% R.H. Dimensions 160(L) × 100(W) × 38(D)mm Weight (battery included) Approx. 350g Power source 9V(6LF22) x 1 Alkaline battery Safety standard EN 61326-1 Accessories Instruction manual Adapter Soft pouch Battery CT-01 6500 LC (For 6500 LC) AL-24-5 AL-21C2-4 5F., NO.105, Jhongcheng Rd., Tucheng Dist., New Taipei City 23674, Taiwan (R.O.C.) TEL: 886-2-22681528 FAX: 886-2-22681529 e-mail: [email protected] www.sew.com.tw MEASURE WITH PRECISION

Upload
others
Category

Documents
view
13
download
0

Embed Size (px):

Transcript of Voltage/Continuity Loop Calibrator TesterVoltage/Continuity Tester Loop Calibrator FEATURES Audible...

Voltage/Continuity Tester

Loop Calibrator

FEATURES

Audible and optic continuity test. Audible and optic voltage check. Voltage protection : 600V Robust and ergonomic housing. For checking electric light bulbs, securings,

wirings and so on. Application : resistor, voltage, semiconductor,

capacitor and so on.

SPECIFICATIONS Continuity 0~500kΩTest current about 5uATest voltage Less than 9VVoltage protection 50~600V (AC/DC)Operating temperature 0 to 40

Storagetemperature -10 to 50

Dimensions 115(L) x 74(W) x 27(D)mmWeight (battery included) Approx. 178g

Power source 9V(6F22) x 1

Safety standardEN 61010-1 CAT III 600VEN 61010-2-030 EN 61326-1

Accessories

Instruction manualRed alligator clipTest probe (Red and Black)Battery

FEATURES

4-20mA (1kΩ load, 24V Loop Supply). 0.025% Basic Accuracy. Simple Operation Interface. Auto Ramp and Step Functions. 0-20mA, 0-24mA selectable. Incremental percentage setting : 0-100%. Warning beeper when output is open. 0-24 V output. The minimum load of 20kΩ on voltage mode.

SPECIFICATIONS (25ºC±5ºC,≤85%R.H.) DC Current (1kΩ Max Load, 24v Loop Supply) Range 0-4mA / 4-20mA / 20-24mAResolution 1uAAccuracy ±0.025%±10uA / ±0.025%±5uA / ±0.025%±5uABeeper warning when output circuit is open and specified output voltage > 24V.

DC Voltage (Approx. 10MΩ load) Range 0-4V / 4-20V / 20-24VResolution 1mVAccuracy ±0.05%±10mV / ±0.05%±5mV / ±0.05%±5mVBeeper warning when voltage is short and specified output current is > 24mA.

GeneralPower consumption 150mA at 24V 1kΩ load Operating temperature 0º C - 40º COperating humidity ≤ 80% R.H.Storagetemperature -10º C - 50º C

Storage humidity ≤ 85% R.H.Dimensions 160(L) × 100(W) × 38(D)mmWeight(battery included) Approx. 350g

Power source 9V(6LF22) x 1 Alkaline batterySafety standard EN 61326-1

Accessories Instruction manual Adapter Soft pouch Battery

CT-01

6500 LC

(For 6500 LC)AL-24-5

AL-21C2-4

5F., NO.105, Jhongcheng Rd., Tucheng Dist., New Taipei City 23674, Taiwan (R.O.C.)

TEL: 886-2-22681528FAX: 886-2-22681529

e-mail: [email protected]

MEASURE WITH PRECISION