VMware VSphere Install, Configure, Manage (V5.5) - LAB MANUAL
Vmware Horizon View Microsoft Lync Install Configure
-
Upload
lalechederramada -
Category
Documents
-
view
266 -
download
1
Transcript of Vmware Horizon View Microsoft Lync Install Configure
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
1/14
VMwareHorizon View5.2
and Microsoft Lync 2013Version 1.0
I N S T A L L AT I O N A N D C O N F I G U R A T I O N G U I D E
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
2/14
VMware Horizon View 5.2 and Microsoft Lync 2013
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 2
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Horizon View with Microsoft Lync . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Highlights of Horizon View with Microsoft Lync . . . . . . . . . . . . . . . . . . . . . .
Lync Features with Horizon View Desktops . . . . . . . . . . . . . . . . . . . . . . . . . .
Horizon View and Microsoft Lync Architecture . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Known Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set Up Lync Server and Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set Up the Windows Client Machine with the VDI
Plug-in and Horizon View Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set Up the Windows Virtual Machine with Lync Client and
Horizon View Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Log In to the Microsoft Lync Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About the Authors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Feedback and Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
3/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 3
VMware Horizon View 5.2 and Microsoft Lync 2013
Introduction
This document provides information for VMware Horizon View 5.2 and its ability to support Microsoft Lync
2013. Included are instructions to download, install, and configure the Microsoft Lync 2013 client for use within a
Horizon View 5.2 desktop. Microsoft Lync 2013 is the first version of Lync that supports unified communications
(UC) Voice over Internet Protocol (VoIP) and video chat capabilities from within a virtual desktop infrastructure
(VDI) deployment without the need for a dedicated IP phone.
This document provides details on:
Software requirements
Hardware requirements
Download instructions
Installation instructions
Conguration instructions
This document will not provide:
Installation and conguration instructions for Microsoft Lync Server 2013
Installation and conguration instructions for Horizon View infrastructure
The instructions assume that the customer already knows how to deploy, install, and configure both Horizon
View and Microsoft Lync Server 2013, as well as all their respective components.
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
4/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 4
VMware Horizon View 5.2 and Microsoft Lync 2013
Horizon View with Microsoft Lync 2013
VMware and Microsoft collaborated to bring support for Lync 2013 with UC VoIP and video to Horizon View
5.2 desktops. Prior to Microsoft Lync 2013, technical challenges prevented support for Lync with both VoIP and
video calls inside all VDI environments. With Microsoft Lync 2010, only VoIP was supported, and it required a
dedicated IP-based phone. For more details about VoIP support in Lync 2010, see the Client Virtualization in
Microsoft Lync 2010white paper.
The following summary highlights key technical problems that prevented VoIP and video from being supported
within VDI with existing human interface devices (HIDs). Technical issues that prevented the enablement of
audio and video right from the virtual machine without the IP phone include:
High load on datacenter server All media processing for VoIP and video chat calls would be media
processed on the datacenter servers.
Media hairpinning VoIP and video chat traffic would not be sent point-to-point between the two endpoints,
but streamed through the datacenter network and server.
High bandwidth Audio and video were not encoded using standardized codecs. Instead, audio and video
were sent as raw USB trac, resulting in extremely high bandwidth usage.
No quality of service (QoS) Audio and video traffic sent in this hairpinned fashion needs to use the
remoting protocol, which doesnt provide granular QoS policies to priorit ize VoIP and video trac.
Highlights of Horizon View 5.2 with Microsoft Lync 2013
This new solution from VMware and Microsoft is fully supported by both companies. Highlights of the features
now available include:
A highly scalable solution Because all media processing is ooaded from the datacenter server to the
client endpoints
Enterprise-grade UC VoIP and video Using industry standard VoIP and video codecs, with the ability to do
full-screen HD video
QoS QoS support for real-t ime VoIP and video
http://www.microsoft.com/en-us/download/details.aspx?id=21129http://www.microsoft.com/en-us/download/details.aspx?id=21129http://www.microsoft.com/en-us/download/details.aspx?id=21129http://www.microsoft.com/en-us/download/details.aspx?id=21129 -
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
5/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 5
VMware Horizon View 5.2 and Microsoft Lync 2013
Lync 2013 Features with Horizon View 5.2 Desktops
Table 1 lists the features that are supported in Lync 2013. The items in blue highlight the Lync 2013 VDI-related
improvements compared to Lync 2010.
FEATURES SUPPORTED/UNSUPPORTED
Presence Supported
Instant message Supported
Desktop sharing Supported
Application sharing Supported
PowerPoint sharing Supported
Whiteboards Supported
File transfer Supported
Online meetings Supported
Office integration Supported
Audio Supported (Audio was only supported via IP-Phone with Lync 2010.)
Video Supported (Video was never supported with Lync 2010.)
Recording audio Unsupported
Table 1: Features of Microsoft Lync 2013
The key features provided by a Microsoft Lync 2013 client and Horizon View 5.2 are:
Ability to utilize a Microsoft Lync 2013 client running inside a Horizon View desktop
Ability to make and receive UC VoIP and video chat calls using audio and video HID devices that are
connected to the access machine
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
6/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 6
VMware Horizon View 5.2 and Microsoft Lync 2013
Horizon View andMicrosoft Lync 2013 Architecture
In addition to deploying a Microsoft Lync 2013 server, customers must deploy Lync software components
on their virtual machines and client-access devices. Figure 1 highlights components of the Horizon View and
Microsoft Lync 2013 architecture.
Windows Client VMware vSphere
Signalingfor all modes
PCoIP
A/V Media IMP, Data Collaboration
Legend
Signaling
Media
A/V Signaling
Lync VDI Plug-in(User A)
Lync 2013 Client(User B)
Horizon ViewClient
Lync 2013 Client(User A)
Lync Server 2013
Horizon ViewAgent
Figure 1: Horizon View and Microsoft Lync 2013 Architecture
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
7/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 7
VMware Horizon View 5.2 and Microsoft Lync 2013
Getting Started
In order to get started, customers must download and install software components for Horizon View 5.2 andMicrosoft Lync 2013. Customers can go directly to Microsoft to download the respective components for
Microsoft Lync Server 2013, Lync Client 2013, and the Lync VDI 2013 Plug-in. Links to these components are
provided in the Requirementssection, below.
Table 2 shows the support matrix for Microsoft Lync Client 2013 with the Microsoft Lync VDI 2013 Plug-in using
PCoIP. Note that this support applies to PCoIP only.
VIEW AGENTOS
VIEW CLIENTOS
VIEW CLIENT(BIT LEVEL)
MICROSOFT VDIPLUG-IN(BIT LEVEL)
COMMENTS
Windows 7 SP1
(32-bit and 64-bit)
Windows 7 SP1
(32-bit)
View Client
(32-bit)
Lync VDI Plug-in
(32-bit)
Supported
Windows 7 SP1
(32-bit and 64-bit)
Windows 7 SP1
(64-bit)
View Client
(64-bit)
Lync VDI Plug-in
(32-bit)
Supported
Windows 7 SP1
(32-bit and 64-bit)
Windows 8
(32-bit)
View Client
(32-bit)
Lync VDI Plug-in
(32-bit)
Tech Preview
(not officially
supported)
Windows 7 SP1
(32-bit and 64-bit)
Windows 8
(64-bit)
View Client
(64-bit)
Lync VDI Plug-in
(32-bit)
Tech Preview
(not officially
supported)
Table 2: Microsoft Lync PCoIP Support
Known Limitations
Certain limitations are known to apply to the deployment of Microsoft Lync with Horizon View. These include:
Although customers can download both a 32-bit and 64-bit version of the Horizon View client, the PCoIP
process running on the Horizon View client operates only in 32-bit mode. Therefore, customers can use only
the 32-bit version of the Lync VDI 2013 Plug-in on the client endpoints.
Customers will not be able to use a 32-bit version of the Microsoft Lync VDI 2013 Plug-in from a machine
that has the 64-bit version of Office 2013. This is a known issue and a configuration that is unsupported by
Microsoft. The bit-level of the Plug-in must match the bit-level of any local Microsoft Office installation.
From a client device perspective, this initial solution is only supported on Windows 7 client machines with SP1
applied.
From a virtual machine perspective, this solution is only supported on virtual machines running Windows 7
with SP1.
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
8/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 8
VMware Horizon View 5.2 and Microsoft Lync 2013
Requirements
In order to effectively deploy Lync 2013 for VoIP and video calls in their environment, customers must meetcertain software and hardware requirements. The software download links are provided in the table below.
Software Requirements
This section outlines software requirements for using Lync Client 2013 to make VoIP and interactive video calls
within Horizon View desktops using HIDs. The software components that are required are summarized in Table 3:
PRODUCT DESCRIPTION
Horizon View 5.2 Horizon View Agent and Horizon View Client software
Microsoft Lync Server 2013 TechNet subscribers can download a copy on the TechNet Web site.
Microsoft Lync Client 2013
(running in virtual machines)
Customers receive a copy of Microsoft Lync Client 2013 as part of Office 2013.
Note:Customers are required to deploy the full version of Microsoft Lync
Client 2013. Microsoft Lync Basic 2013 does not support working inside a VDI
environment.
Microsoft Lync VDI 2013
Plug-in
(running on the client device,
also known as the access
device)
A TechNet subscription is not required for this download. Customers can
download a copy of the 32-bit version.
Note:As explained in Getting Started, you do not need to download the
64-bit version of the Lync VDI 2013 Plug-in because it is not yet supported
with Horizon View.
Note:Users who do not require UC VoIP and video chat functionality are
not required to download and install the Microsoft Lync VDI 2013 Plug-in.
Table 3: Software Components for Deployment of Lync Client 2013
Customers will be able to use an ESX 5.0 server and View 5.2 Agent and View Client 5.3 components to enable
the Lync 2013 VoIP and video functionality. There is no dependency on the ESX platform.
https://technet.microsoft.com/en-us/subscriptions/securedownloads/#ProductFamilyId=489http://www.microsoft.com/en-us/download/details.aspx?id=35457http://www.microsoft.com/en-us/download/details.aspx?id=35457https://technet.microsoft.com/en-us/subscriptions/securedownloads/#ProductFamilyId=489 -
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
9/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 9
VMware Horizon View 5.2 and Microsoft Lync 2013
Hardware Requirements
Customers are required to have servers that can host the ESX platform, Horizon View infrastructure, and the
Microsoft Lync 2013 Server infrastructure, as shown in Table 4. Review the hardware requirements in the linked
product documentation.
PRODUCT REQUIREMENTS
VMware vSphere and
Horizon View
ESX 5.0 Hardware Requirements
VMware View 5.0 System Requirements
Microsoft Lync Server 2013
infrastructure
Microsoft Lync 2013 Server Hardware Requirements
Microsoft Lync Client 2013 Microsoft Lync 2013 Client Information
Microsoft Lync VDI Plug-in Microsoft Lync VDI 2013 Plug-inNote: The Lync VDI 2013 Plug-in requires a Windows Client access
machine with 1.5GHz CPU and minimum of 2GB RAM.
List of supported Microsoft
Lync USB headsets and
webcams
Microsoft Lyncsupported USB devices
Table 4: Hardware Components Required for Deployment of Lync 2013 and Horizon View
http://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-DEB8086A-306B-4239-BF76-E354679202FC.htmlhttp://pubs.vmware.com/view-50/topic/com.vmware.ICbase/PDF/view-50-installation.pdfhttp://technet.microsoft.com/en-us/library/gg398835(v=ocs.15)https://technet.microsoft.com/en-us/subscriptions/securedownloads/#ProductFamilyId=489http://technet.microsoft.com/en-us/library/jj205404(v=ocs.15)http://technet.microsoft.com/en-us/library/jj204683(v=ocs.15)http://technet.microsoft.com/en-us/lync/gg278173.aspxhttp://technet.microsoft.com/en-us/lync/gg278173.aspxhttp://technet.microsoft.com/en-us/library/jj204683(v=ocs.15)http://technet.microsoft.com/en-us/library/jj205404(v=ocs.15)https://technet.microsoft.com/en-us/subscriptions/securedownloads/#ProductFamilyId=489http://technet.microsoft.com/en-us/library/gg398835(v=ocs.15)http://pubs.vmware.com/view-50/topic/com.vmware.ICbase/PDF/view-50-installation.pdfhttp://pubs.vmware.com/vsphere-50/index.jsp?topic=%2Fcom.vmware.vsphere.install.doc_50%2FGUID-DEB8086A-306B-4239-BF76-E354679202FC.html -
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
10/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 1 0
VMware Horizon View 5.2 and Microsoft Lync 2013
Setup and Installation
This section will guide you through the steps to set up and install Lync 2013 with UC VoIP and video for Horizon
View 5.2 desktops. You will set up:
Lync Server 2013 and accounts
Windows client machine with the VDI plug-in and Horizon View Client
Windows 7 virtual machine with Lync Client 2013 and Horizon View Agent
Finally, you will log in to the Microsoft Lync Client in Horizon View.
Set Up Lync Server 2013 and Accounts
This section will help you set up Lync Server 2013 and your accounts.
Deploy Lync Server Refer to the Lync Server Deployment guide
Before installing and testing the Lync VDI Plug-in verify that your Lync Server has been setup properly You can do this by executing the following steps
a Install the Lync Client on a regular Windows laptop with a similar conguration to the
machines on which you will be deploying the plug-in
b Start the client On the Lync client enter the Sign-in addressprovided by your system
administrator
Figure 2: Lync Client Sign-In Screen
http://technet.microsoft.com/en-us/library/gg398664.aspxhttp://technet.microsoft.com/en-us/library/gg398664.aspx -
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
11/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 1 1
VMware Horizon View 5.2 and Microsoft Lync 2013
c ClickSign Inon the Lync client and it will attempt to automatically resolve your sign-in name and
your domain name with the appropriate enterprise Lync server
d If the above step fails your Lync server and Lync accounts have not been set up properly
Microsoft recommends validating your Lync setup You might not have configured your DHCPservers to automatically resolve the server lookup request during the sign-in procedure or your
Edge server was not configured correctly
On your Lync Server ensure that EnableMediaRedirection is set to TRUEfor all VDI users
NoteAs part of the Lync Server setup make sure you generate a certicate and add this certicate to
each Windows client machine and virtual desktop The certificate will need to be placed in the Trusted
Root Certificate Authoritiesdirectory The Lync VDI Plug-in will not pair with the Lync client
running inside the remote desktop if this step is not completed
Set Up the Windows Client Machine with the VDI Plug-in and Horizon View Client
This section will help you set up your Windows client machine. Before you begin, be sure that you have
downloaded all the software listed in the Software Requirementssection.
On each of your client (access) machines install the Horizon View Client that you downloaded
(refer to the Software Requirementssection for the download link)
Using the copy of the Lync VDI Plug-in that you downloaded (refer to the Software Requirements
section for the download link) install the Lync VDI Plug-in onto each of your Windows client
machines by running Lyncvdi.exeand following the installation wizard
CautionBe sure to install the Lync VDI Plug-in on the Windows client access machines Do not install
the Lync VDI Plug-in on the virtual machines
If you plan to make video calls you will need a USB webcam plugged into your client (access) machine
Make sure you do not forward the webcam to the remote desktop You can nd USB webcams that are
optimized for Microsoft Lync on the Lync Tech Center Web site
Before the Lync VDI Plug-in can pair up with the Lync Client, the end user must manually congure
specific registry settings on their Windows client endpoint. (This applies to both 32-bit and 64-bitclients.)
Congure the CongurationMode, ServerAddressInternal, and ServerAddressExternal registry settings
on the Windows client machine. An example of these registry settings is below. Customers should enter
in their respective hostnames for the ServerAddressInternal and ServerAddressExternal elds.
[HKEY_CURRENT_USER\SOFTWARE\Microsoft\Ofce\15.0\Lync]
CongurationMode=dword:00000001
ServerAddressInternal=lyncsrv2013.lync.local
ServerAddressExternal=Access.lync.local
In the ServerAddressInternal and ServerAddressExternal elds, be sure to use only the host name for each
respective server. Microsoft does not recommend or support the use of IP addresses in the server fields.
5. Use the certicate that you generated during your Lync Server 2013 deployment, and import thatcertificate onto your Windows client machine.
Important:The certificate will need to be placed in the Trusted Root Certificate Authorities directory.
http://technet.microsoft.com/en-us/lync/gg278173.aspx#webcamshttp://technet.microsoft.com/en-us/lync/gg278173.aspx#webcams -
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
12/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 1 2
VMware Horizon View 5.2 and Microsoft Lync 2013
Set Up the Windows 7 Virtual Machine with Lync Client 2013 and Horizon View Agent
Use these steps to lead you through the setup for your Windows virtual machine. Before you begin, be sure
that you have downloaded all the software listed in the Software Requirementssection.
Using the copy of the Horizon View Agent that you downloaded from the Horizon View download
page (refer to the Software Requirementssection for the download link) install View Agent on each of
the virtual machines
When installing the VMware View Agent be sure to select at the minimum both PCoIP Serverand
Virtual Printerso that the necessary software will be installed to support Lync integration
Notethis is only supported on Windows virtual machines and requires Windows SP to be applied
Using the copy of the Lync Client that you downloaded (refer to the Software Requirements
section for the download link) install the Lync Client on all virtual machines
Use the certicate that you generated during your Lync Server deployment and import that
certificate into each of your virtual machines
ImportantThe certificate will need to be placed in the Trusted Root Certificate Authoritiesdirectory
Log In to the Microsoft Lync Client
This section will show you how to log in to the Microsoft Lync Client.
Log in to the Horizon View desktop
Start Lync Client Enter your Sign-in addressas provided by your system administrator As noted
in Set Up Lync Server and Accounts if your Microsoft Lync server and Lync accounts are set
up correctly the Lync client wi ll register to the Lync Server
If the Lync Client cant sign in make sure that it has the proper settings in the Internal Server
Name and External Server Name elds In the Advanced Connection Settings page on the Lync Client
select Manual Configurationand enter the appropriate host names for the Internal Server Name
and External Server Namefields Microsoft does not recommend using IP addresses in the InternalServer Name and External Server Name elds so be sure to use host names only
You should see an alert message button on your Lync Client
Figure 3: Lync Client Alert Message
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
13/14
I N S T A L L A T I O N A N D C O N F I G U R A T I O N G U I D E / 1 3
VMware Horizon View 5.2 and Microsoft Lync 2013
When your Lync Client registers to the Lync Server from within your Horizon View desktop
it will attempt a handshake using the Dynamic Virtual Channel (DVC) with the Lync VDI Plug-in
running on your access machine As part of the handshake you will see a dialog box for you to enter
your username and password for the Lync VDI Plug-in After you enter your credentials the plug-in will
connect to the Lync Server Upon connecting the alert message will disappear from Lync client in the
virtual machine and a green check mark will appear on the right of the screen
Figure 4: Screen Showing Successful Connection
-
7/25/2019 Vmware Horizon View Microsoft Lync Install Configure
14/14
VMware, Inc.3401 Hillview Avenue Palo Alto CA 94304 USA Tel 877-486-9273 Fax 650-427-5001 www.vmware.com
Copyright 2013 VMware, Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. VMware products are covered by one or more patents listed at
http://www.vmware.com/go/patents. VMware is a registered trademark or trademark of VMware, Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be
VMware Horizon View 5.2 and Microsoft Lync 2013
Resources
You can nd more information on Microsoft Lync Server 2013 and Lync Client 2013 requirements at the links below:
Microsoft Lync 2013 Server Hardware Requirements
Microsoft Lync 2013 Preview Guide
Microsoft Lync 2013 Client information
Microsoft Lync VDI Plug-in
Horizon vSphere and VMware vCenter Server Resources
Product Overview
Product Documentation
About the Authors
Tony Huynh and Karin Li authored this document. Tony is a Senior Product Manager on the VMware Horizon
View team. Karin is a Senior MTS on the VMware Horizon View team.
Feedback and Questions
VMware appreciates your feedback on the material included in this guide, and in particular would appreciate
input on the following questions:
How useful was the information in this guide?
What other specic topics would you like to see covered?
For additional information, please post questions to the VMware Horizon View Community. The Horizon View
team monitors the Community page and replies to queries.
http://technet.microsoft.com/en-us/library/gg398835(v=ocs.15)http://technet.microsoft.com/en-us/library/gg398616(v=ocs.15)http://technet.microsoft.com/en-us/library/jj205404(v=ocs.15)http://technet.microsoft.com/en-us/library/jj204683(v=ocs.15)http://www.vmware.com/products/vspherehttp://www.vmware.com/support/pubs/vs_pubs.htmlhttp://communities.vmware.com/community/vmtn/viewhttp://communities.vmware.com/community/vmtn/viewhttp://www.vmware.com/support/pubs/vs_pubs.htmlhttp://www.vmware.com/products/vspherehttp://technet.microsoft.com/en-us/library/jj204683(v=ocs.15)http://technet.microsoft.com/en-us/library/jj205404(v=ocs.15)http://technet.microsoft.com/en-us/library/gg398616(v=ocs.15)http://technet.microsoft.com/en-us/library/gg398835(v=ocs.15)