VLM/VLR High Power Series · VLM/VLR High Power Series Broadband Visible Fiber Lasers IPG Photonics...
Transcript of VLM/VLR High Power Series · VLM/VLR High Power Series Broadband Visible Fiber Lasers IPG Photonics...
VLM/VLR High Power SeriesBroadband Visible Fiber Lasers
IPG Photonics introduces VLM/VLR High Power Series of broadband visible fiber lasers with up to 200 W average power and flexible choice of operating wavelength in the range of 525 to 635 nm. Based on IPG’s highly efficient and reliable fiber laser technologies, this series of lasers features high beam quality with either free-space or fiber beam delivery. The all fiber laser technology directly enables adjusting the average power over the full range while maintaining high beam quality and high power stability. For user convenience, these lasers are packaged as either OEM modules (VLM) or end-user friendly 19” rack mount units (VLR). Due to compact dimensions, industrial grade design and low power consumption, IPG’s VLM/VLR High Power lasers are ready for integration into customer’s systems in the field ranging from laser shows and cinema projectors to medical and scientific applications.
NEW PRODUCT
Features
��Laser Light Shows
��Laser Projectors
��Medical
��Scientific
��Wavelength Range: 525-635 nm
��Output Power up to 200 W
��High Beam Quality
��Power Stability 1%
��High Wall-plug Efficiency
��Compact and Low Cost
�� Industrial Performance
��SM Free-space or MM Fiber Delivery
Applications
Output Power up to 200 W
��OEM Modules or End-user Rack Units
130 200
45
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
THE IPG PHOTONICS CORPORATION CLAIMS PROPRIETARYRIGHTS IN THE INFORMATION DISCLOSED HEREON. THISDRAWING IS FURNISHED IN CONFIDENCE ON THE EXPRESSUNDERSTANDING THAT EITHER IT NOR ANY REPRODUCTIONTHEREOF WILL BE DISCLOSED TO OTHERS OR USED FORTHE PURPOSE OF MANUFACTURE OR PROCUREMENT OF THEARTICLE OR PART SHOWN HEREON.
PROPRIETARY AND CONFIDENTIAL
DIMENSIONS ARE IN MILIMETERSTOLERANCES:ANGULAR: MACH 0.25ONE PLACE DECIMAL 0.5TWO PLACE DECIMAL 0.25THREE PLACE DECIMAL 0.12FINISH
SURFACE AREA (mm2)
MATERIAL
FINISH---
---
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME IPG PHOTONICS CORPORATION50 OLD WEBSTER ROAD
OXFORD, MA. 01540Phone: 508-373-1100
TITLE:
SIZE
BDWG. NO. REV
WEIGHT: ---SCALE: 1:5
UNLESS OTHERWISE SPECIFIED:
1
--- ----
---
SHEET 1 OF 1
---DO NOT SCALE DRAWING
METRIC DIMENSIONS1.6
---
130 200
45
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
THE IPG PHOTONICS CORPORATION CLAIMS PROPRIETARYRIGHTS IN THE INFORMATION DISCLOSED HEREON. THISDRAWING IS FURNISHED IN CONFIDENCE ON THE EXPRESSUNDERSTANDING THAT EITHER IT NOR ANY REPRODUCTIONTHEREOF WILL BE DISCLOSED TO OTHERS OR USED FORTHE PURPOSE OF MANUFACTURE OR PROCUREMENT OF THEARTICLE OR PART SHOWN HEREON.
PROPRIETARY AND CONFIDENTIAL
DIMENSIONS ARE IN MILIMETERSTOLERANCES:ANGULAR: MACH 0.25ONE PLACE DECIMAL 0.5TWO PLACE DECIMAL 0.25THREE PLACE DECIMAL 0.12FINISH
SURFACE AREA (mm2)
MATERIAL
FINISH---
---
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME IPG PHOTONICS CORPORATION50 OLD WEBSTER ROAD
OXFORD, MA. 01540Phone: 508-373-1100
TITLE:
SIZE
BDWG. NO. REV
WEIGHT: ---SCALE: 1:5
UNLESS OTHERWISE SPECIFIED:
1
--- ----
---
SHEET 1 OF 1
---DO NOT SCALE DRAWING
METRIC DIMENSIONS1.6
---
130 200
45
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
THE IPG PHOTONICS CORPORATION CLAIMS PROPRIETARYRIGHTS IN THE INFORMATION DISCLOSED HEREON. THISDRAWING IS FURNISHED IN CONFIDENCE ON THE EXPRESSUNDERSTANDING THAT EITHER IT NOR ANY REPRODUCTIONTHEREOF WILL BE DISCLOSED TO OTHERS OR USED FORTHE PURPOSE OF MANUFACTURE OR PROCUREMENT OF THEARTICLE OR PART SHOWN HEREON.
PROPRIETARY AND CONFIDENTIAL
DIMENSIONS ARE IN MILIMETERSTOLERANCES:ANGULAR: MACH 0.25ONE PLACE DECIMAL 0.5TWO PLACE DECIMAL 0.25THREE PLACE DECIMAL 0.12FINISH
SURFACE AREA (mm2)
MATERIAL
FINISH---
---
DRAWN
CHECKED
ENG APPR.
MFG APPR.
Q.A.
DATENAME IPG PHOTONICS CORPORATION50 OLD WEBSTER ROAD
OXFORD, MA. 01540Phone: 508-373-1100
TITLE:
SIZE
BDWG. NO. REV
WEIGHT: ---SCALE: 1:5
UNLESS OTHERWISE SPECIFIED:
1
--- ----
---
SHEET 1 OF 1
---DO NOT SCALE DRAWING
METRIC DIMENSIONS1.6
---
Optical Characteristics
Legal notices: All product information is believed to be accurate and is subject to change without notice. Information contained herein shall legally bind IPG only if it is specifically incorporated into the terms and conditions of a sales agreement. Some specific combinations of options may not be available. The user assumes all risks and liability whatsoever in connection with use of a product or its application. IPG, IPG Photonics, The Power to Transform and IPG Photonics’ logo are trademarks of IPG Photonics Corporation. © 2020 IPG Photonics Corporation. All rights reserved.
VLM/VLR High Power SeriesBroadband Visible Fiber Lasers
MAX. AVERAGE OUTPUT POWER: 400 WMAX. PEAK OUTPUT POWER: 10 kW
PULSE DURATION: 5 nsPULSE REPETITION RATE: 5-30 MHz
WAVELENGTH RANGE: 520-645, 1040-1350 nm
DANGER - INVISIBLE LASERRADIATION AVOID EYE OR SKIN
EXPOSURE TO DIRECT ORSCATTERED RADIATION
CLASS 4 LASER PRODUCT
IEC 60825-1:2014
General Characteristics
+1 (508) 373-1100; [email protected]+49 2736 44200; [email protected] (European Inquiries)
www.ipgphotonics.com
7.2.2 R11 1/20
Wavelength*, nm 525 to 635
Bandwidth, nm up to 10
Mode of Operation Pulsed
Average Power**, W up to 200
Pulse Repetition Rate***, MHz >10
Pulse Duration, ns 4.5
Power Tunability, % 1-100
Power Stability****, % ±0.5
Beam Parameter Product, mm × mrad <6 (multi-mode option, 100 μm fiber)
Beam Mode Quality, M2 <1.5 (single-mode option)
*Custom wavelengths in the specified spectral range are available upon request.**Custom power levels up to 200 W available upon request. The power may be limited by wavelength selection.***Optimal repetition rate depends on the wavelength selection.****Over 8 hours, T= const
Laser Dimensions (W × D × H), mm 329 × 529 × 70 448 × 678 × 132
Laser Head Dimensions (W × D × H), mm 130 × 200 × 45 (single-mode option)
Laser Module or Rack Cooling Water-cooledLaser Head Cooling Passive Air-cooling (single-mode option)
Supply Voltage 48 VDC Single-phase 50/60 Hz, 200-240 VAC
Module Rack Unit