VIVLIA ANTALLAKTIKWN 7.7720-7920 serie

7020 Series TractorsATTACHMENTS

Issue 02/2006 Region II

John Deere Werke Mannheim

Issue 02-2006 (RI, RII) ATTACHMENTS FOR FIELD INSTALLATION 7020 Series Tractors-2

ATTACHMENTS FOR FIELD INSTALLATIONUnless otherwise indicated, the following attachments can be installed on all three 7020-Series tractors. Please notethat under „Order From“ it is indicated where the individual field installation kits can be sourced through. Thedenoted „EPDC“ bundles can be ordered through the normal parts channels. The denoted „CG“ bundles areavailable through complete goods channels.

OPERATOR STATION

Instructional Seat

Padded and upholstered Instructional Seat provides com-fortable seating for an additional passenger. The seatincludes a back rest with storage netting at the rear and aretractable seatbelt.

Field Office

Field Office provides a convenient area for storage of officesupplies. Mounts in an easy to access location at the left rearside of the cab:

• Ideal for storage of such items as mobile phone, papers,calculator, PDA’s, writing materials and other uses.

• Lid provides a flat writing surface.• An external 12-volt electrical outlet is provided with the

Field Office

Rear Pull Down Sun ShadeA pull-down shade for the rear windshield improves opera-tor visibility on sunny days by blocking direct light andreducing glare.

Order From Bundle Description

EPDC RE192707Instructional Seat.Not compatible with AR116863 Field Office.


EPDC AR116863Field Office.Not compatible with RE192707 Instructional Seat.

Order From Bundle DescriptionEPDC RE197944 Rear Pull Down Sun Shade.


Accessories Mounting Bracket

The accessories mounting bracket assists the installation ofmonitors, phones, radios and other accessories in single con-venient location. The bracket bolts into existing holes on the7020 Series tractors.

Utility Tray and Beverage Holder

(8020 shown)

The utility tray contains an additional beverage holder and astorage platform in which to place papers and other materi-als.

Insulated Cool Box

The Insulated Cool Box aids operator comfort by keepingfood and drinks cool and stored securely. The box can bequickly removed for cleaning or movement betweenmachines. Includes fastening straps and mounting hardware.

Refrigerated Cool Box

The 12-volt Refrigerated Cool Box will keep food anddrinks chilled through hot working conditions. The box iscapable of maintaining a 30°C difference to ambient tem-peratures and its 6-litre capacity will take standard 0.75 lbottles.

The kit additionally features a battery security system pre-venting accidental discharge while the box is still connectedto the cabin’s 12-volt cigarette lighter outlet without theengine running. The box can be easily removed for cleaningor for movement between machines.

Order From Bundle DescriptionEPDC RE162262 Accessories Mounting Bracket.

Order From Bundle DescriptionEPDC RE162644 Utility Tray and Beverage Holder.

Order From Bundle DescriptionEPDC AL112070 Insulated Cool Box

Order From Bundle DescriptionEPDC MC900001 Refrigerated Cool BoxEPDC MC900002 Mounting kit


Replacement Floor Mat

Replacement rubber Floor Mats can be purchased to helprestore the cabin’s original appearance.

Left-Hand Convenience Step

(8020 shown)

Left-Hand Convenience Step provides improved access tothe front window for cleaning and for GreenStar StarFireReceiver mounting / dismounting:

• Tread serrated design is self cleaning and slipresistant.

.

Step Mud Guards

A left and right-hand step mud guards extend the coverageoffered by the rear fenders:

• Aid in keeping the left and right-hand hand cabin entrysteps clean of mud and debris thrown by wide reartyres.

OPERATOR STATION ELECTRICAL

Powerstrip Adapters

Powerstrip adapters allow electrical connection for monitorsand equipment not fitting the tractor’s standard Powerstripor 3-pin oulets. Available adapters include:

• 1m cable for custom hard-wiring to components• Cigarette lighter-style outlet• North American-style flat 3-pin adapter (replicates 3-

pin outlet found on Command Console)• European-style round 3-pin adapter (as available on

6020-Series and pictured above).

Order From Bundle DescriptionCG R191667 Floor Mat


EPDC RE162261

Left Hand Convenience StepPossible interference with Toolbox when tractor is equipped with Pneumatic Brakes.Requires the following additional parts: 1 x R202182; 2 x 19M7946; 2 x 24M7344; and 2 x 14M7300

Order From Bundle DescriptionCG RE215510 Step Mud Guard, LH.

CG RE205744

Step Mud Guard, RH.Tractor must be equipped with Right Hand Door and Steps. Requires purchase of additional parts: 3 x 19M7784


Powerstrip adapters can also be used with the Field Office.

Antenna Mount and Wiring for Business Band (Two-way) Radio

Provides the wiring and an external antenna mount for busi-ness band (two-way) radios.

Rear SpeakersA kit containing two speakers is available to furtherenhance the sound quality of tractors where just twofront speakers were factory-installed.

Cigarette Lighter and Ash TrayCigarette Lighter heat element and Ash Tray can be suppliedfor those customers wishing to equip their tractor.

LIGHTING

Field Vision Xenon HID Rear Lighting

The fender-mounted Field Vision Rear Lighting bundle pro-vides a Xenon High Intensity Discharge (HID) light forimproved visibility to rear hitched implements when work-ing at night or in low light conditions. Xenon HID lightsprovide extreme brightness and a daylight colour output forexcellent field definition.

• 2.5x greater light flux (illuminance) than halogenworking lights

• 35% lower energy consumption than halogen bulbs• 5x greater service life than halogen bulbs.

One HID light is included per field kit. The factory-installedRear HID lighting option installs two lights, one for eachfender.


EPDC RE67013 Standard Connector with 1m Cable (for hard-wiring electrical components)

EPDC RE67014 Cigarette Lighter Outlet AdapterEPDC RE67015 NA 3 Pin Adapter for PowerstripEPDC RE67016 RII 3 Pin Adapter for Powerstrip


EPDC RE219922 Antenna Mount and Wiring for Business Band (Two-way) Radio.

Order From Bundle DescriptionCG AR114564 Kit, Two Rear Speakers

Order From Bundle DescriptionEPDC AH104259 Ash TrayEPDC R212866 Ash Tray InsertEPDC AR60937 LighterEPDC AH108380 Bulb


EPDC RE203813Field Vision Xenon HID Rear Lighting, Fender Mounted.Includes one light per kit.


Two Roof-Mounted Side Flood Lights

For improved vision to the side of the tractor, the 7020Series Tractors may be equipped with two 65W floodlights,one on each side of the cab. The two roof-mounted halogenside floodlights that are also included in the factory installedField Vision Xenon HID Front Lighting Package.

Front Hitch / Loader Lighting

Front Hitch / Loader Lighting package provides alternativeroad lighting when front-mounted applications obscure thetractor’s primary (grill-mounted) road lights:

• Lights are mounted on the cabin’s front A posts- Allow for improved night vision and safety when

working and transporting with front-mountedequipment or loaders.

Primary road lights should be used whenever possible:• Alternative lights to be used only when the front hitch

or loader block the tractor’s primary road lights• Priority switch within the cabin selects between

primary / alternative road lighting use• Primary and alternative road lights cannot be used

simultaneously.

Rotary Beacon Light

Rotary beacon lights are available to meet requirements incommercial or governmental applications. The rotating,high-intensity light mounts on the front left corner of the cabroof in the up position when in use and can be lowered whennot required to prevent damage. On / Off switch for the bea-con light is located within easy reach of the operator.


EPDC RE187746 Two Roof-Mounted Side Flood Lights.Included in Code 9066


EPDC RE225343Front Hitch / Loader Lighting PackageAlternative road light package for tractors equipped with front hitch or front loader

Order From Bundle DescriptionEPDC RE239930 Beacon Light KitEPDC RE235448 Beacon Light Switch Kit


PERFORMANCE MANAGEMENT

Radar Sensor Kit

The true ground speed Radar Sensor activates functionscontained within the CommandCenter and cornerpost dis-plays by allowing the tractor to reliably calculate the actualground travel speed independent of wheel speed. The radarneeds to be installed in order to utilise the hitch slip com-mand or to calculate actual wheel slip.

Additionally, the radar improves the accuracy of the follow-ing CommandCenter readouts:

• Area covered• Area / hour • Distance and ground speed

Performance Monitor

The Performance Monitor can be equipped to display infor-mation related to various speeds, area, distance and alarmdata additional to the readouts seen in the CommandCenter.A radar sensor is required for a 100% accurate calculation ofwheel slip, distance covered and speed.

Attachment kit includes Performance Monitor, wiring har-ness, mounting bracket and installation hardware & instruc-tions.

9-Pin Implement Feedback Connector for TouchSet Depth Control

(8020 shown)

The 9-pin implement feedback connector required forTouchSet depth control of implements is available as a field-installed attachment. The connector and wiring harness ena-bles a position input to be provided to the tractor’s Elec-tronic Selective Control Valve (SCV) control unit onAutoPowr tractors, enabling TouchSet depth control func-tionality through the first SCV.

The feature allows the operator to adjust height and depth ofremote lift cylinders by using the TouchSet controls in thecab.

Order From Bundle DescriptionEPDC RE237256 Radar Sensor Kit (not UK).EPDC RE237257 Radar Sensor Kit (for UK only).


EPDC AR114555Performance Monitor Requires Radar Sensor to achieve accurate readouts


EPDC RE58827

9-Pin Connector Implement Feedback.Required for TouchSet depth control. Only compatible with Codes 0994 and 0995.RE58827 is also utilised for Implement Single-Lever Control Lift Assist Kit for PQ+, AQ+ and AutoPowr tractors


Implement Switch

Mounts on the implement and monitors when the implementis raised or lowered. When used in conjunction with theRadar Sensor and Performance Monitor gives 100% accu-rate hectare coverage.

AG MANAGEMENT SOLUTIONS

Implement Connector

To cater for customers who originally ordered their tractorGreenStar Ready but without the Implement Connector andthen wish to run either of the GreenStar Parallel Trackingand Basic Field Doc products from AMS, the ImplementConnector is available separately as a field attachment bun-dle.

For details of additional components needed for GreenStarproducts please refer to the AMS Ag Sales Manual andPrice Pages.

Implement Connector and Implement Communications GatewayTo cater for customers who originally ordered their tractorGreenStar Ready but without the Implement Connector andImplement Communications Gateway and then wish toachieve ISO compatibility, both the Implement Connectorand Gateway are available separately as a field attachmentbundle.

When both the tractor and any implements include commu-nication devices that meet ISO standards, the ImplementCommunications Gateway allows for tractor / implementcommunication. Fully equipped with the Implement Con-nector, the tractor is also compatible with GreenStar ParallelTracking and Basic Field Doc products from AMS. Fordetails of additional components needed for GreenStar prod-ucts please refer to the AMS Ag Sales Manual and PricePages.

Parallel Tracking

GreenStar Parallel Tracking provides a unique, modularsolution for straight and curved-line tractor guidance, elimi-nating overlap and skipping. The operator can easily keeptrack of straight-line progress by occasionally glancing atthe GreenStar Display or by listening to audible tones.GreenStar Parallel Tracking system thereby allows for:

• Reduced overlap and skipping• Successful night-time operation• Operation through adverse weather conditions


EPDC RE21519 Implement Switch with 3m (10 Ft.) Harness.


EPDC RE208786

Implement Connector.Required for GreenStar Parallel Tracking or Field Doc functionality. Also requires 4 x 37M7109 available through Service Parts. See AMS price pages for additional components that are needed for these options.


EPDC RE213115

Implement Connector and Implement Communications Gateway (TECU - Tractor Electronics Control Unit).Attachment specific software bundle is required for proper operation. Order software Part Number (specified in kit) through the JD Point Ordering System. Machine model number and serial number is required. Download through Service Advisor's software delivery system as required.A decription of the software download procedure is described within the MIB: http://www.r2.deere.com/marketinginfo/Product_Information/Tractors/7020/7020-2004-05.pdf


Parallel Tracking kits are available from AMS Europe usingJDmint. Dealers are free to source the remaining GreenStarCommon Components and a subscription to the StarFireSF2 differential correction signal required to form a func-tional system through using existing customer-owned itemsor by sourcing from AMS Europe and StellarSupportrespectively.

For further code details, please refer to the AMS Sales Man-ual and Price Pages.

AutoTrac Assisted Steering

The AutoTrac Assisted Steering System greatly enhancestractor utility by providing fully automated vehicle guidancealong successive parallel passes.

AutoTrac field kits containing all necessary hardware,brackets and the geofenced, platform-specific AutoTracKeyCard in a single bundle are available from AMS Europeusing JDmint. Dealers are then free to source the remainingGreenStar Common Components (inclusive Terrain Com-pensation Module) and a subscription to the StarFire SF2differential correction signal required to form a fully func-tional AutoTrac system by using existing customer-owneditems or by sourcing from AMS Europe and StellarSupportrespectively.


Field Doc

GreenStar Field Doc offers a simple way to record informa-tion on operations including tillage, seeding, spraying, ferti-lising and in applying manual or automatically variableinput rates required for modern farm documentation prac-tices. In addition, customers can also draw upon a simpleand highly accurate boundary measurement tool incorpo-rated into the Field Doc system.

Collected data is readily transferable to a home PC runningJDOffice or other approved desktop software to provide val-uable farm management information. Field Doc assists cus-tomers by:

• Optimising production.• Reducing administrative paperwork for effective farm

management.


JDLink

The innovative GreenStar JDLink system from AMS allowscustomers to optimise the true performance capabilities oftheir 7020 by collecting machine data for management pur-poses. Using mobile phone technology, JDLink continu-ously transmits signals from the tractor’s CAN Bus systemto a central John Deere server where the information canthen be made available to users via a JDLink website orthrough email, fax or SMS messaging.


JDLink field kits containing the Communications Controllerand Cab Hardware are available from AMS Europe throughJDmint. For information on the JDLink system and theappropriate tractor bundles required to form a fully func-tional JDLink system, please refer to the AMS Ag SalesManual and Price Pages.

ENGINE

Cold Weather Start Aid

For the 8.1 litre engine, an in-cab operated ether starting aidcan be equipped for customers who frequently start theirtractors at or below temperatures of -6ºC. A button on thesteering column injects starting fluid from starting fluid can,which is replaceable.

TRANSMISSION AND PTO

Field Cruise for PowrQuad Plus

Where desired, PowrQuad Plus tractors can be equippedwith the Field Cruise feature as a field-installed attachmentvia a software download. Field Cruise simplifies planting,spraying and other light load tasks by allowing the operatorto set an upper engine rpm limit between 1350 and 2200rpm to attain a desired ground travel speed (interpreted aswheel speed). Constant ground speed is maintained in lightload conditions, even as loads on the tractor vary.

• Valuable feature for operations where application rates are dependent upon controlled ground speed (spraying, fertiliser spreading, seed drilling, etc.).

• Limiting engine speed in light load situations may improve fuel economy.

Please refer to the Transmissions section for further opera-tional details.


CG RE215421Kit, Cold Weather Start Aid for 8.1 L Engine.Model 7920 only.


EPDC RE242904

Field Cruise for PowrQuad Plus TractorsAttachment specific software bundle is required for proper operation. Order Software Part Number (specified in kit) through JD Point System. Machine model number and serial number is required. Download through Service Advisor's software delivery system as required.A decription of the software download procedure is described within the MIB: http://www.r2.deere.com/marketinginfo/Product_Information/Tractors/7020/7020-2004-05.pdf


Back-up Alarm

A Back-up Alarm is available to accommodate governmen-tal or industrial sales of the 7720, 7820 and 7920 Tractorsnot equipped with pneumatic air brakes. The alarm soundswhenever the transmission is placed in reverse.

Front PTO Equipment

For full tractor versatility, three full power 1000 rpm FrontPTO’s are also available for field installation on 7020-Seriestractors. The three FPTO options offer customers the choiceof direction of rotation and output shaft diameter required tosuit their own individual applications. Available are:

• Type 1, 1000 rpm (counter clockwise) 34.9mm 6-splineFront PTO (all models)

• Type 2, 1000 rpm (clockwise) 34.9mm 21-spline FrontPTO (7720 and 7820 only)

• Type 3, 1000 rpm (clockwise) 44.5mm 20-spline FrontPTO (7920 only)

All front PTO’s feature wet clutches, modulated engage-ment, manual output and shaft indexing. The integratedFPTO design also offers full compatibility with the 7020tractor’s intelligent management features including:

• IMS programming compatibility• In-cab soft start engagement modulation through the

CommandCenter• Integrated console controls• Corner post display engagement indicator.


CG RE212187 Back-up AlarmIncompatible with Air Brake system.


EPDC RE214457 Kit, Mounting Parts for Front PTO, with TLS.

EPDC RE211436

Independent Front PTO with 34.9mm (1-3/8 In.) 6-Spline, 1000 rpm Counter-clockwise rotating shaft (Type 1).Models 7720, 7820 and 7920.Attachment specific software bundle is required for proper operation. Order Software Part Number (specified in kit) through JD Point System. Machine model number and serial number is required. Download through Service Advisor's software delivery system as required.A decription of the software download procedure is described within the MIB: http://www.r2.deere.com/marketinginfo/Product_Information/Tractors/7020/7020-2004-05.pdf

EPDC RE211437

Independent Front PTO with 34.9mm (1-3/8 In.) 21-Spline, 1000 rpm Clockwise rotating shaft (Type 2).Models 7720 and 7820 only.Attachment specific software bundle is required for proper operation. Order Software Part Number (specified in kit) through JD Point System. Machine model number and serial number is required. Download through Service Advisor's software delivery system as required.A decription of the software download procedure is described within the MIB: http://www.r2.deere.com/marketinginfo/Product_Information/Tractors/7020/7020-2004-05.pdf

EPDC RE211438

Independent Front PTO with 44.5mm (1-3/4 In.) 20-Spline, 1000 rpm Clockwise-rotating shaft (Type 3).Model 7920 only.Attachment specific software bundle is required for proper operation. Order Software Part Number (specified in kit) through JD Point System. Machine model number and serial number is required. Download through Service Advisor's software delivery system as required.A decription of the software download procedure is described within the MIB: http://www.r2.deere.com/marketinginfo/Product_Information/Tractors/7020/7020-2004-05.pdf


Rear PTO Equipment

The kit, designed for 7920 tractors equipped with Code2418, includes the reversible PTO shaft providing 540 /1000 rpm PTO speeds. The kit readily substitutes the exist-ing 1000 rpm 44.5 mm, 20-spline shaft to provide compati-bility with 34.9 mm 540 rpm (6-spline) and 1000 rpm (21-spline) implements.

WHEELS AND BALLAST

Pick up Weight - 900 kg

The 900kg Big Pack 'Monster' weight provides customerswith convenient ballasting to optimise tractor performance.The weight can be quickly mounted onto the front weightsupport and, when equipped with an additional centrelinkbracket, also fits Cat. II / III front or rear 3-point hitches.

Front Weight Set - Regular

(8020 shown)

The attachment kit includes 20 Quick Tatch weights, eachweighing 50 kg.

Front Weight Mounting Kits

Attachment hardware for installing front weights can beordered as follows. Two retainers, two washers and two cap-screws (as appropriate) are required.

Trailer Coupling Front Weight SetThe attachment kit includes 2 special coupling weightsweighing 50 kg each that can be used within a front weightpackage to create a trailer coupling. The total kit weighs 100kg.


EPDC RE218639

Conversion Kit from 44.5 mm (1-3/4 In.) 1000 rpm to 34.9 mm (1-3/8 In.) 540/1000 rpm PTO.Model 7920 only.Conversion for tractor equipped with Code 2418.

Order From Bundle DescriptionEPDC AL112166 Pick up weight, 900 kgEPDC AL113121 Center link bracket for pick up weight


EPDC AL71258Weight Set, 1000 kgRequires Mounting Hardware - see following.


EPDC AR68801 Retainer Order 2 x AR68801

EPDC 24M7241 WasherOrder 2 x 24M7241

EPDC 19H1926Capscrew for mounting 4 suitcase weightsOrder 2 x 19H1926

EPDC R59761Capscrew for mounting 12, 16 or 20 suitcase weightsOrder 2 x R59761

Order From Bundle DescriptionEPDC AL119964 Weight Set, 100 kg


Rear Wheel Weights

Rear wheel weights are available for optimum ballastingand can be mounted on either of the inner or outer sides ofthe steel or heavy-duty cast rear wheels as desired. Weightcarrying capacities of the tyres must always be observed.

When mounting cast weights on the outside of the wheel, a75 kg weight should first be mounted. Up to three, 205 kgweights can then be added per side. The first 75 kg weight isrequired to allow clearance to the gear for the rack and pin-ion when changing tread settings. Mounting the 205 kgweights directly to the rear wheel otherwise requires remov-ing the weights when adjusting tread width.

Note:Mounting hardware required. See partscatalogue.

Rims for Steel Wheel With Cast Hub

Customers utilising the Substitutable Rear Shipping Wheelsoption can source required Steel Wheels to mount on casthub supplied with the tractor.

• Allows for custom fitment of rear tyres• One-piece steel disc / rim design provides lighter

overall weight• Well suited for weight-conscious transport, seedbed or

mowing applications.

Note: Tyre load carrying capacities must be observed.

Rims for Heavy Duty Cast Wheel

Customers utilising the Substitutable Rear Shipping Wheelsoption can source rims to mount on the Heavy Duty Casthub and centres supplied with the tractor.

• Allows for custom fitment of rear tyres• Tight fit hole and slot hole on both the disk-to-rim and

disk-to-axle centres the disc to rim.• Well suited for heavier draft applications.

Order From Bundle DescriptionCG R167153 Rear Wheel Weight, 75 kg (Qty 2)CG R207782 Rear Wheel Weight, 205 kg


EPDC RE208559 Steel Wheel Rim for fitment of 18.4R42 or 480/80R42 tyres (Qty 1)



EPDC RE219206Steel Wheel Rim for fitment of 18.4R46, 480/80R46 or 520/85R46 tyres (Qty 1)

EPDC RE208548 Steel Wheel Rim for fitment of 620/70R42 or 650/65R42 tyres (Qty 1)

EPDC RE208544 Steel Wheel Rim for fitment of 620/70R46 tyres (Qty 1)

EPDC RE208543Steel Wheel Rim for fitment of 710/70R38, 650/85R38 or 650/75R38 tyres (Qty 1)

EPDC RE208540Steel Wheel Rim for fitment of 800/70R38 tyres (Qty 1)100 mm axle only.


The following rims are available for all models in observ-ance of restrictions offered ex-factory (Group 48:AutoPowr, 5-step front: rear, tyre capacities, etc). Unlessstated, rims have 76.2 mm offset.

Note:Tyre load carrying capacities must be observed.

Drive Wheel Hardware for Clamp-on Dual Usage

Hardware kits for both the Regular Duty Steel Wheel withCast Hub and for the Heavy Duty Cast Rear wheels are to beused when using clamp on duals:

• Provides extra clamping force for hub to axle.

Deluxe Pivoting Fenders

Deluxe Pivoting MFWD Fenders can be ordered for pre-MY2005 customers looking to replace ’standard’ fixedfenders. Pivoting fender design allows the fender bracket tocontact against tractor frame and then swivel for tighter turnangles.


EPDC RE172185Wheel Rim for fitment of 320/90R50 tyresGroup 46 tyre: note front tyre requirements



EPDC RE174760Wheel Rim for fitment of 520/85R38 or 20.8R38 tyresGroup 46 tyre: note front tyre requirements

EPDC RE161991 Wheel Rim for fitment of 320/90R54 tyres


EPDC RE172896Wheel Rim for fitment of 380/90R50 tyres174.8 mm offset

EPDC RE175533 Wheel Rim for fitment of 480/80R46, 18.4R46 or 520/85R46 tyres

EPDC RE175484 Wheel Rim for fitment of 520/85R42 or 20.8R42 tyres

EPDC RE176459 Wheel Rim for fitment of 520/85R42, 20.8R42 or 580/70R42 tyres

EPDC RE176460 Wheel Rim for fitment of 620/70R42 or 650/65R42 tyres

EPDC RE166180 Wheel Rim for fitment of 650/75R38, 710/70R38 or 650/85R38 tyres

EPDC RE175489Wheel Rim for fitment of 900/50R42 tyres0 mm offset



EPDC RE224262Wheel Rim for fitment of 710/70R42 tyres100 mm axle only

EPDC RE171073Wheel Rim for fitment of 800/70R38 tyres0 mm offset


CG AR219840Drive Wheel Hardware for Cast Wheel.Hardware for cast hub to be used when clamp-on duals are used.

CG AR219841Drive Wheel Hardware for Steel Wheel with Cast Hub.Hardware for cast hub to be used when clamp-on duals are used.


• Required for Group 43 front tyres and for Group 42tyres set at 1979mm and wider tread settings.

Fenders feature a full range of adjustments to accommodatea variety of tread settings.

• Made of heavy-duty polymers for high durability andlong life.

• Fenders offer UV protection for fade resistance.Fenders can be ordered for appropriate tyre section widths:

Chock Blocks

Chock blocks are advised for use as an additionalsafety measure when parking tractor / trailer combina-tions and to fulfil statutory regulations where required.Additional Block Holder bracket can be assembledwhen not previously supplied ex-factory (see PartsCatalogue).

HYDRAULICS

Selective Control Valve Equipment

To enhance hydraulic performance and improve tractor pro-ductivity, the following kits are available for 7020 SeriesTractors.


CG RE211530Deluxe Pivoting Front Fenders - 480 mm. (18.7 In) WideRecommended use with 290 mm (12.4 In.) to 420 mm (16.9 In) tyre widths

CG RE211529Deluxe Pivoting Front Fenders - 620mm. (24.4 In) Wide Recommended use with 480 mm (18.4 In.) to 600 mm (23.6 In.) tyre width.

Order From Bundle DescriptionEPDC AL26777 Chock Block (Quantity 1)


EPDC RE211613

Third Mechanical Rear Remote Cylinder Control Valve with Breakaway Couplers and High Pressure Relief Lever.For PowrQuad Plus or AutoQuad Plus models 7720, 7820 only.

EPDC RE211615

Fourth Mechanical Rear Remote Cylinder Control Valve with Breakaway Couplers and High Pressure Relief Lever.For PowrQuad Plus or AutoQuad Plus models 7720, 7820 only.

EPDC RE211617Fourth EH Rear Remote Cylinder Control Valve with Breakaway Couplers and High Pressure Relief Lever.For AutoPowr tractors only.

CG RE214368 Auxiliary Mid-Mount Valve Plumbing Kit - No TLS.

EPDC RE214369 Auxiliary Mid-Mount Valve Plumbing Kit - TLS Only.


Power Beyond

Many implements including manure spreaders, forage wag-ons, seeders and sprayers requiring hydraulic power areequipped with their own pressure and flow compensatinghydraulic valves to independently control oil flow. For theseapplications, the Power Beyond System can be equipped toprovide live hydraulic power independent of the tractor’sown SCV performance, ensuring adequate, controlledpower supply to the implement and optimising tractor per-formance when the supply is no longer needed.

The attachment kits include couplers, connecting hoses, dustcovers and installation hardware & instructions.

Hydraulic Motor Return

Hydraulic motor return kits allow the return of used hydrau-lic oil directly into the tractor’s sump, bypassing the remotecoupler and SCV. The kits are then ideal for use with imple-ments where minimal back pressure is desired, i.e. thoseequipped with hydraulic motors or where hitch valves withlift assist wheels are installed.

Two kit versions are available with either with single or dualreturn lines. The dual return line version includes a casedrain.

Implement Single-Lever Lift ControlThe Implement Single-Lever Control Lift Assist Kit allowsoperation of a hitch mounted implement and its lift assistwheels at the same time using the SCV control lever.

The kit connects the rear hitch cylinder to the 9-Pin Imple-ment Feedback Connector to disable the hitch from its con-trols and allow operation of the hitch with the SCV.

• 9-Pin Electrical Feedback connector first required.Refer to Performance Management section for details.

EPDC RE214360

Auxiliary Mid-Mount EHSCV 2 or 3 Function Joystick, RH Console For PowrQuad Plus or AutoQuad Plus models 7720, 7820 only.Attachment specific software bundle is required for proper operation. Order software Part Number (specified in kit) through the JD Point Ordering System. Machine model number and serial number is required. Download through Service Advisor's software delivery system as required.A decription of the software download procedure is described within the MIB: http://www.r2.deere.com/marketinginfo/Product_Information/Tractors/7020/7020-2004-05.pdf

CG RE214363

Auxiliary Mid-Mount EHSCV 2 or 3 Function Joystick, Command Arm For AutoPowr tractors only.Attachment specific software bundle is required for proper operation. order Software Part Number (specified in kit) through the JD Point Ordering System. Machine model number and serial number is required. Download through Service Advisor's software delivery system as required.A decription of the software download procedure is described within the MIB: http://www.r2.deere.com/marketinginfo/Product_Information/Tractors/7020/7020-2004-05.pdf

CG RE217197 Kit to Convert 2 Function to 3 Function Auxiliary Stack.

EPDC RE214364 Auxiliary Mid-Mount EHSCV Valve, 2 Function.

CG RE214365 Auxiliary Mid-Mount EHSCV Valve, 3 Function.



EPDC RE211439Power Beyond Kit for PowrQuad Plus and AutoQuad Plus.For PowrQuad Plus or AutoQuad Plus models 7720, 7820 only

EPDC RE218430 Power Beyond Kit for AutoPowr.For AutoPowr tractors only.


EPDC RE211440

Hydraulic Motor Return Kit.For use with hydraulic motor returns or on hitch valve with lift assist wheels. For multiple motor return without case drain order two RE211440. For multiplemotor return with case drain order one RE211440 and one RE211441.

EPDC RE211441

Hydraulic Motor Return Kit with Case Drain.Includes two return lines and case drain. For use with hydraulic motor returns or on hitch valve with lift assist wheels. For multiple motor return with case drain order one RE211440 and oneRE211441.


Hydraulic Trailer Brake Kit

Hydraulic trailer brakes allow modulated braking of trailersequipped with hydraulic brake systems for safer and morecontrolled braking. The system utilises a delay valves thatactuates the trailer brakes immediately prior to tractor brak-ing:

• Connects directly to tractors hydraulic system.• Does not require a separate oil reservoir.

The attachment kit includes hydraulic trailer brake valve,coupler and installation hardware & instructions.

HITCH AND DRAWBAR

3 In 1 Hitch Equipment

To fulfil the future hitch equipment demands of customers, anumber of the 3 in 1 hitch design components are also avail-able for field installation. The 3-in-1 rails, auto couplingWagon Hitch, Piton Fix and Ball type hitches and the Regu-lar Cat 2 drawbar (see later) can be supplied.


CG RE211647

Implement Single-Lever Control Lift Assist Kit9-Pin Electrical Feedback Connector Kit RE58827 for TouchSet Depth Control first required for RE211647 to function.

Order From Bundle DescriptionCG RE213100 Hydraulic Trailer Brake.


CG RE2174973 in 1 Hitch Rails for Type 1 or 2 (1-3/8”) PTO.For Models 7720 and 7820 only.

CG RE2174983 in 1 Hitch Rails for Type 3 (1-3/4”) PTO.For Model 7920.

EPDC AL163697Ball Hitch for 3-in-1 rails.Requires Code 2719 or Field Attachments RE217497 or RE217498.

EPDC AL163696Piton Fix Hitch for 3-in-1 rails.Requires Code 2719 or Field Attachments RE217497 or RE217498.

CG RE217499Kit, Wagon Hitch (Automatic Coupling).Requires Code 2719 or Field Attachments RE217497 or RE217498.


Pickup Hitch

The Pickup Hitch with Drawbar allows for fast one-manhitching of twin axle trailers or trailed implements requiringclose-coupled hitch points:

• Hydraulically coupled and controlled in-cab using firstSCV.

The hitch includes both a Cat 2 drawbar and hook.

Drawbar Equipment

Available Quick Pin Hammer Strap allows for simplifiedimplement hookup to drawn implements. Tractors equippedwith the taller Group 48 rear tyre sizes can utilise a Drop-down Drawbar Kit to maintain level implement hitching andimprove drawbar / implement compatibility.

The Cat 3 drawbar (shown) can be installed to extend capa-bilities over the ex-factory Cat 2 version. Key specificationsare as so:

• Towable load (assisted braking): 14T (Cat 2 11.5T).• Vertical Load (fully retracted): 3000daN (Cat 2 2800

daN)• Drawbar Pin - 1.5-in. diameter (Cat 2 1.25-in.)• Drawbar dimensions - 2-in. thick x 3-in. wide (Cat 2

1.5-in. x 3-in.)

STORAGE

Storage Container - 45 l

(6020 shown)

The 45 l Tool Storage Container can be mounted to either ofthe tractor’s base weight, its Quick Tatch weights (requiresTrailer Coupling Set) or the 900 kg Pick up Weight for con-venient storage of tools and implement equipment.


CG RE211561Pickup Hitch for Type1 or 2 (1-3/8”) PTO.For Models 7720 and 7820 only.

CG RE219845 Pickup Hitch for Type 3 (1-3/4”) PTO.For Model 7920.


EPDC RE194407 Quick Pin Hammer Strap Kit for Category 2 Drawbar.

EPDC RE211559 Dropdown Drawbar Kit, Cat. 2.Requires Group 48 Tyres.

CG RE211553 Category 3 Drawbar Kit


The volumous sheet metal storage container can carry up to45kg of gear and includes side handles for easy movementbetween machines. A quick lock pin secures the containerlid.

VANDALISM PROTECTION

Lockable Fuel Tank Cap

A lockable fuel filler cap can be equipped for pre-MY2005customers looking to gain additional protection against van-dalism and theft.

Door Lock Kit

Door lock kit provides individually keyed cabin door locksas a deterrent to vandalism and theft. The kit also aids in sat-isfying insurance policies where commonly keyed vehiclescannot be guaranteed cover against damage or theft.

Kit contains two handles with lock cylinders, four keysand installation instructions. Further spare keys can becut from the blank.

Battery Disconnect

Externally-mounted battery disconnect kit can be used bothto immobilise the tractor and prevent unintended use as wellas in avoiding battery draining from running monitors orradios.


EPDC AL120005 Storage container, 45 lMax. 45kg payload


EPDC RE211434Kit, Locking Fuel Cap.Included in base equipment for MY2005 tractors.

Order From Bundle DescriptionEPDC AL71345 Door Lock KitEPDC AL71350 Blank Key

Order From Bundle DescriptionEPDC RE212216 Battery Disconnect

VIVLIA ANTALLAKTIKWN 7.7720-7920 serie

Documents

Transcript of VIVLIA ANTALLAKTIKWN 7.7720-7920 serie