Visual Installation Guide Binding Posts - The Home … Binding Post insert at an angle into the...
2
Installation: Binding Posts Distributed by: Home Depot U.S.A., Inc. 2455 Paces Ferry Rd., NE, Atlanta, GA 30339 For assistance, call: 1-800-394-7519 HOMEDEPOT.COM Item #1000015548 Model #5106-LA-BK/RD Item #1000015549 Model #5106-WH-BK/RD Visual Installation Guide Binding Posts Install all desired Binding Posts into keystone wall plate. Place Binding Post insert at an angle into the keystone port with the tab up. Tilt insert up to lock in place. Tighten each binding post to secure wires. *NOTE* Red is positive (+) and black is negative (–). Binding Post pair: Red (positive +), Black (negative -). Unscrew the rear portion of each binding post . 1. 5. 6. 4. 2. Remove about ½” of insulation from each speaker wire, then feed through opening on the side of the binding post. 3. Page 1 of 2
Transcript of Visual Installation Guide Binding Posts - The Home … Binding Post insert at an angle into the...
Installation: Binding Posts
Distributed by: Home Depot U.S.A., Inc.2455 Paces Ferry Rd., NE, Atlanta, GA 30339
For assistance, call: 1-800-394-7519HOMEDEPOT.COM
Item #1000015548Model #5106-LA-BK/RD
Item #1000015549Model #5106-WH-BK/RD
Visual Installation GuideBinding Posts
Install all desired Binding Posts into keystone wall plate.Place Binding Post insert at an angle into the keystone port with the tab up. Tilt insert up to lock in place.
Tighten each binding post to secure wires. *NOTE* Red is positive (+) and black is negative (–).
Binding Post pair: Red (positive +), Black (negative -). Unscrew the rear portion of each binding post .1.
5. 6.
4.
2.
Remove about ½” of insulation from each speaker wire, then feed through opening on the side of the binding post.
3.
Page 1 of 2
Installation: Binding Posts (continued)
Distributed by: Home Depot U.S.A., Inc.2455 Paces Ferry Rd., NE, Atlanta, GA 30339
For assistance, call: 1-800-394-7519HOMEDEPOT.COM
Binding Posts are compatible with most standard keystone wall plates; they are also compatible with most banana plugs.
The Binding Posts should be tight and speaker wire should not be loose.
Tighten each binding post to secure wires.*NOTE* Red is positive (+) and black is negative (–).
Mount wall plate to low voltage mounting bracket (not included). Unscrew Binding Posts to expose the front side wire feed through.7.
11. 12.
10.
8.
Remove about ½” of insulation from each speaker wire and feed through opening on side of the Binding Post.
9.
Item #1000015548Model #5106-LA-BK/RD
Item #1000015549Model #5106-WH-BK/RD
Visual Installation GuideBinding Posts (continued)
Page 2 of 2
