VisionSOM-6ULL Datasheet and Pinout - SoMLabs · VisionSOM-6ULL Datasheet and Pinout -...

VisionSOM-6ULL Datasheetand Pinout

Rev. 20200304092107

Source URL: http://wiki.somlabs.com/index.php/VisionSOM-6ULL_Datasheet_and_Pinout

http://wiki.somlabs.com/index.php/VisionSOM-6ULL_Datasheet_and_Pinout

Table of Contents

General description 1 ....................................................................................................................................................... Applications 1 ................................................................................................................................................................

Features 3 .......................................................................................................................................................................... Pictures of SOM versions 4 ............................................................................................................................................. Ordering info 6 .................................................................................................................................................................. Block Diagram 7 ................................................................................................................................................................ Operating ranges 9 ........................................................................................................................................................... Electrical parameters 10 .................................................................................................................................................. SOM pinout 11 ................................................................................................................................................................... Dimensions 26 ...................................................................................................................................................................

1VisionSOM-6ULL Datasheet and Pinout - 20200304092107

VisionSOM-6ULL Datasheet and Pinout

General description

The VisionSOM-6ULL family is a SODIMM-sized SoM based on the NXP i.MX6 ULL application processor which features anadvanced implementation of a single ARM Cortex-A7 core (at speeds up to 900MHz).

The VisionSOM-6ULL is a low power highly integrated SoM (System on Module) featuring high computation power and802.11b/g/n Wi-Fi and Bluetooth v4.2 connectivity. The option of integrated, fully certified Wi-Fi and Bluetooth modulesimplifies the carrier board design and is ideally suited for wireless application. The VisionSOM-6ULL provides a varietymemory configuration including flexible range of DDR3L, NAND, eMMC and SD memory card that meets our customersrequirements.

The SoM supports connections to a variety of interfaces: two high-speed USB on-the-go with PHY, dual Ethernet, audio,display with touch panel and serial interfaces. In addition, the system supports industrial grade targeting embeddedapplication.

SOMLabs also provides a complete hardware and software development board for the SoM in the form of a carrier board andoptional TFT display and touch panel.

Applications

Industrial embedded Linux computerHome AppliancesHome Automation – Smart HomeHuman-machine Interfaces (HMI)Point-of-sales (POS) terminals


Cash Register2D barcode scanners and printersSmart grid infrastructureIoT gatewaysResidential gatewaysMachine vision equipmentRoboticsFitness/outdoor equipment


FeaturesPowered by NXP i.MX 6ULL application processorCore clock up to 900MHzUp to 512MB SDRAM DDR3LUp to 512MB NAND Flash / 32GB eMMC / uSD memory cardOptional Murata 802.11b/g/n Wi-Fi and Bluetooth v4.2+EDR modulePower-efficient and cost-optimized solutionIdeal for industrial IoT and embedded applicationsIntegrated security features


Pictures of SOM versions

Version Photo

eMMC

micro-SD


NAND Flash

Wi-Fi is available for all memory variants configurations.


Ordering info

SLSN6CpuType_Clock_RamSize_FlashSize_SF_TEMP_VSLS Product type

SLS - System on Module

N SOM Name1 - VisionSOM SODIMM200

6 CPU Family6 - i.MX6

CpuTypeCPU TypeY0 - i.MX6 ULL Y0Y1 - i.MX6 ULL Y1Y2 - i.MX6 ULL Y2

ClockCPU Clock Speed528C - 528MHz792C - 792MHz900C - 900MHz

RamSize

DDR3 RAM Size64R - 64MB128R - 128MB256R - 256MB512R - 512MB

FlashSize

Flash Size Type and DensitySD - MicroSD connector128N - 128MB NAND256N - 256MB NAND512N - 512MB NAND04GE - 4GB eMMC08GE - 8GB eMMC16GE - 16GB eMMC32GE - 32GB eMMC

SFSpecial Features0SF - No Special Features1WB - Built-in 802.11b/g/n Wi-Fi and Bluetooth v4.2+EDR Module

TEMPOperating TemperatureC - Consumer: 0 to +70 CSI - Industrial with Wi-Fi: -30 to +70 CI - Industrial: -40 to +85 C

VSOM VersionA - Version 1.0B - Version 1.1


Block Diagram


Operating ranges

Parameter Value Unit CommentPower Supply 5.0 V Connected to +5VIN SODIMM pinInput GPIO voltage 3.3 V -

Environment temperature1

-40…+85oC

Industrial range w/o WiFi module-30…+70 Industrial range with WiFi module0…+70 Consumer range

Note:1. Maximum MPU junction temperature is +105oC (industrial version) or +95oC (consumer version).


Electrical parameters

SOMsignal name Parameter

ValueUnits

Min. Typ. Max.+5VIN Supply Voltage 4.0 5.0 5.5 V- Total Supply Current1 x x x AVGPIO GPIO Input Voltage 0 3.3 3.62 V

+3.3VOUT SOM Internal LDOOutput Current - - 0.5 A

USB-OTGx-VBUS USB Supply 4.40 - 5.5 V

VDD-COIN-3V SNVS BackupBattery Supply 2.66 - 3.6 V

- ADC Inputs Voltage 0 - 3.3 V

Notes:1. Excluding external load connected to +3.3VOUT lines.2. Applying the maximum voltage 3.6V results in shorten lifetime. Recommended value is smaller than 3.5V.


SOM pinoutImportant notes1. Detail pin configurations description you can find, edit and arrange in dedicated MEX files (with free "i.MX Pin Tool"configurational tool): VisionSOM-6ULL without WiFi module and no SDIO1 on edge connector or VisionSOM-6ULL without WiFimodule and with SDIO1 on edge connector or VisionSOM-6ULL witht WiFi module on-board.2. LCD_DATAxx pins are internally used for boot sequence configuration. We recommend to use LCD_DATAxx lines asoutputs or using eFuse boot configuration.

SODIMMPIN

Functionaldomain Function name i.MX6 UltraLite/

ULL Pad Name Alternate functionsDescription (refer toi.MX6 UltraLite/ULLmanuals for details)

1 Power GND - - -2 Power GND - - -

3 Ctrl PMIC-STBY-REQ CCM_PMIC_STBY_REQ - Output, leave open if notused.

4 Ctrl MX6-POR-B - - External warm reset input,active L.

5 Ctrl PMIC-ON-REQ SNVS_PMIC_ON_REQ - Output, leave open if notused.

6 Power VDD-SNVS-3V3 VDD_SNVS_IN -

SNVS backup power supplymust be held between 2.9Vand 3.3V if the systemrequires keeping real timeand other data on OFF state.Internally connected to+3.3V, leave open.

7 BOOT BOOT-MODE1 BOOT_MODE1 GPIO5_IO11

BOOT-MODE1 BOOT-MODE000 boot from fuses (default)01 serial downloader10 internal boot11 reserved

8 Power VDD-COIN-3V VDD_SNVS_IN -

Optional external coinbattery for SNVS powerdomain, must be heldbetween 2.9V and 3.3V ifthe system requires keepingreal time and other data onOFF state.Leave open if not used.

9 BOOT BOOT-MODE0 BOOT_MODE0 GPIO5_IO10

BOOT-MODE1 BOOT-MODE000 boot from fuses (default)01 serial downloader10 internal boot11 reserved

10 GPIO-SNVS SNVS-TAMPER9 SNVS_TAMPER9 GPIO5_IO09 Tamper input (SNVS powerdomain) or GPIO 3.3V.

11 USB USB-OTG2-VBUS USB_OTG2_VBUS - +5V USB bus. Leave open ifnot used.


13 USB USB-OTG1-VBUS USB_OTG1_VBUS - +5V USB bus. Leave open ifnot used.

14 Ctrl ONOFF SRC_RESET_BInput for power interruptgeneration. Leave open ifnot used.

https://somlabs.com/wp-content/uploads/SoMLabs-VisionSoM-6ULL-NAND-SD-eMMC-noWIFI.zip

https://somlabs.com/wp-content/uploads/SoMLabs-VisionSoM-6ULL-NAND-SD-eMMC-noWIFI-extSDIO1.zip

https://somlabs.com/wp-content/uploads/SoMLabs-VisionSoM-6ULL-NAND-SD-eMMC-noWIFI-extSDIO1.zip

https://somlabs.com/wp-content/uploads/SoMLabs-VisionSoM-6ULL-NAND-SD-eMMC-WiFi.zip


15 Power GND - - -

16 Ctrl POR-B POR_B -

Cold reset negative logicinput resets all modules andlogic in the IC.May be used in addition tointernally generated poweron reset signal (logical AND,both internal and externalsignals are consideredactive low).

17 Power GND - - -


19 USB USB-OTG2-DP USB_OTG2_DP - Leave open if not used.20 Power GND - - -21 USB USB-OTG2-DN USB_OTG2_DN - Leave open if not used.22 Power GND - - -23 Power GND - - -


25 USB USB-OTG1-DP USB_OTG1_DP - Leave open if not used.26 Power GND - - -27 USB USB-OTG1-DN USB_OTG1_DN - Leave open if not used.28 Power GND - - -29 Power GND - - -


31 USB nUSB-OTG-CHD USB_OTG1_CHD_B - Leave open if not used.


33 JTAG JTAG-MOD JTAG_MOD - Leave open if not used.


35 Power GND - - -


37 CLK1-N CCM_CLK1_N -General purpose differentialhigh speed clockinput/output.Leave open if not used.

38 Power GND - - -

39 CLK1-P CCM_CLK1_P -General purpose differentialhigh speed clockinput/output.Leave open if not used.



43 JTAG JTAG-TDI JTAG_TDI - JTAG TDI input line or GPIO.



45 GPIO GPIO-8 GPIO1_IO08

PWM1_OUTWDOG1_WDOG_BSPDIF_OUTCSI_VSYNCUSDHC2_VSELECTCCM_PMIC_RDYUART5_RTS_B

Universal GPIO with 3.3Vlogic levels.

46 JTAG JTAG-TMS JTAG_TMS - JTAG TMS input line or GPIO.


ENET1_REF_CLK1PWM3_OUTUSB_OTG1_PWRUSDHC1_RESET_BENET2_1588_EVENT0_INUART5_TX


48 JTAG JTAG-nTRST JTAG_TRST_B - JTAG TRST input line (activeL) or GPIO.


ENET2_REF_CLK2PWM4_OUTANATOP_OTG2_IDCSI_FIELDUSDHC1_VSELECTENET2_1588_EVENT0_OUTUART5_RX

Universal GPIO with 3.3Vlogic levels.WLAN-ENABLE in SOM withWiFi/BT module


52 JTAG JTAG-TDO JTAG_TDO - JTAG TDO output line orGPIO.


ENET1_MDCENET2_MDCUSB_OTG_HOST_MODECSI_PIXCLKUSDHC2_CD_BCCM_STOPUART1_RTS_B


54 JTAG JTAG-TCK JTAG_TCK -JTAG TCK input line or GPIO.Connected to JTAG-TCK line(via separating resistor 10k).


I2C1_SDAGPT1_COMPARE3USB_OTG2_OCUSDHC1_CD_BCCM_DI0_EXT_CLKSRC_TESTER_ACK



PWM2_OUTWDOG1_WDOG_ANYSPDIF_INCSI_HSYNCUSDHC2_RESET_BUSDHC1_RESET_BUART5_CTS_B


57 COM-GPIO UART1-TXD UART1_TX_DATA

ENET1_RDATA02I2C3_SCLCSI_DATA02GPT1_COMPARE1GPIO1_IO16SPDIF_OUTUART5_TX

Default: UART1 TxD outputor universal GPIO with 3.3Vlogic levels.



I2C1_SCLGPT1_COMPARE2USB_OTG2_PWRENET1_REF_CLK_25MUSDHC1_WPSDMA_EXT_EVENT00SRC_ANY_PU_RESETUART1_TX




ENET1_MDIOENET2_MDIOUSB_OTG_PWR_WAKECSI_MCLKUSDHC2_WPCCM_WAITCCM_REF_EN_BUART1_CTS_B



I2C2_SDAGPT1_COMPARE1USB_OTG1_OCENET2_REF_CLK2MQS_LEFTENET1_1588_EVENT0_OUTSRC_EARLY_RESETWDOG1_WDOG_B


63 COM-GPIO UART1-RXD UART1_RX_DATA

ENET1_RDATA03I2C3_SDACSI_DATA03GPT1_CLKGPIO1_IO17SPDIF_INUART5_RX

Default: UART1 RxD input oruniversal GPIO with 3.3Vlogic levels.


I2C2_SCLGPT1_CAPTURE1ANATOP_OTG1_IDENET1_REF_CLK1MQS_RIGHTENET1_1588_EVENT0_INSRC_SYSTEM_RESETWDOG3_WDOG_B



ENET1_TDATA02I2C4_SCLCSI_DATA06GPT1_CAPTURE1GPIO1_IO20ECSPI3_SS0


66 COM-GPIO UART1-CTS UART1_CTS_B

ENET1_RX_CLKUSDHC1_WPCSI_DATA04ENET2_1588_EVENT1_INGPIO1_IO18USDHC2_WPUART5_CTS_B

Default: UART1 CTS outputor universal GPIO with 3.3Vlogic levels.



ENET1_TDATA03I2C4_SDACSI_DATA07GPT1_CAPTURE2GPIO1_IO21SJC_DONEECSPI3_SCLK



ENET2_COLI2C2_SDACSI_DATA15CSU_CSU_INT_DEBGPIO1_IO31ECSPI2_MISOEPDC_PWRCTRL03



ENET2_RDATA02CSI_DATA01UART2_CTS_BGPIO1_IO24SJC_JTAG_ACT

Default: UART3 TxD input oruniversal GPIO with 3.3Vlogic levels.



ENET1_CRSFLEXCAN2_TXCSI_DATA08GPT1_COMPARE2GPIO1_IO22SJC_DE_BECSPI3_MOSI



ENET2_RDATA03CSI_DATA00UART2_RTS_BGPIO1_IO25EPIT1_OUT


74 COM-GPIO UART1-RTS UART1_RTS_B

ENET1_TX_ERUSDHC1_CD_BCSI_DATA05ENET2_1588_EVENT1_OUTGPIO1_IO19USDHC2_CD_BUART5_RTS_B

Default: UART1 RTS input oruniversal GPIO with 3.3Vlogic levels.


ENET2_TDATA02I2C1_SCLCSI_DATA12CSU_CSU_ALARM_AUT02GPIO1_IO28ECSPI2_SCLK



ENET2_RX_CLKFLEXCAN1_TXCSI_DATA10ENET1_1588_EVENT1_INGPIO1_IO26EPIT2_OUT



ENET2_TDATA03I2C1_SDACSI_DATA13CSU_CSU_ALARM_AUT01GPIO1_IO29ECSPI2_SS0EPDC_PWRCTRL01




ENET1_COLFLEXCAN2_RXCSI_DATA09GPT1_COMPARE3GPIO1_IO23SJC_FAILECSPI3_MISO



GPIO1_IO30ECSPI2_MOSIEPDC_PWRCTRL02ENET2_CRSI2C2_SCLCSI_DATA14CSU_CSU_ALARM_AUT00



ENET2_TX_ERFLEXCAN1_RXCSI_DATA11ENET1_1588_EVENT1_OUTGPIO1_IO27WDOG1_WDOG_B


81 Power GND - - -82 Power GND - - -83 NC - - - -84 Power GND - - -

85 Power +3.3VOUT - - +3.3V generated by SOM'sLDO.

86 NC - - - -








94 NC - - - -95 NC - - - -

96 Power +5VIN - - +4.0-5.5V input powersupply.

97 Ethernet ENET1-RXD0 ENET1_RX_DATA0

UART4_RTS_BPWM1_OUTCSI_DATA16FLEXCAN1_TXGPIO2_IO00KPP_ROW00USDHC1_LCTLEPDC_SDCE04

Ethernet MAC1-PHYinterface signal or universalGPIO with 3.3V logic levels.




UART4_CTS_BPWM2_OUTCSI_DATA17FLEXCAN1_RXGPIO2_IO01KPP_COL00USDHC2_LCTLEPDC_SDCE05



101 Ethernet ENET1-CRS-DV ENET1_RX_EN

UART5_RTS_BCSI_DATA18FLEXCAN2_TXGPIO2_IO02KPP_ROW01USDHC1_VSELECTEPDC_SDCE06


102 Power +5VIN +4.0-5.5V input powersupply.

103 Power GND - - -


105 Ethernet ENET2-TX-CLK ENET2_TX_CLK

UART8_CTS_BECSPI4_MISOENET2_REF_CLK2GPIO2_IO14KPP_ROW07ANATOP_OTG2_IDEPDC_SDDO14

Ethernet MAC2-PHYinterface signal or universalGPIO with 3.3V logic levels.10R resistor connected inseries.


107 Power GND - - -


109 Ethernet ENET2-RXER ENET2_RX_ER

UART8_RTS_BECSPI4_SS0EIM_ADDR25GPIO2_IO15KPP_COL07WDOG1_WDOG_ANYEPDC_SDDO15

Ethernet MAC2-PHYinterface signal or universalGPIO with 3.3V logic levels.Connected to WDOG-B line.



UART6_TXI2C3_SCLENET1_MDIOGPIO2_IO08KPP_ROW04USB_OTG1_PWREPDC_SDDO08





UART6_RXI2C3_SDAENET1_MDCGPIO2_IO09KPP_COL04USB_OTG1_OCEPDC_SDDO09


114 Ethernet ENET1-TXEN ENET1_TX_EN

UART6_RTS_BPWM6_OUTCSI_DATA21ENET2_MDCGPIO2_IO05KPP_COL02WDOG2_WDOG_RST_B_DEBEPDC_SDCE09



117 Ethernet ENET2-CRS-DV ENET2_RX_EN

UART7_TXI2C4_SCLEIM_ADDR26GPIO2_IO10KPP_ROW05ENET1_REF_CLK_25MEPDC_SDDO10


118 Ethernet ENET1-TX-CLK ENET1_TX_CLK

UART7_CTS_BPWM7_OUTCSI_DATA22ENET1_REF_CLK1GPIO2_IO06KPP_ROW03GPT1_CLKEPDC_SDOED

Ethernet MAC1-PHYinterface signal or universalGPIO with 3.3V logic levels.10R resistor connected inseries.

119 Ethernet ENET2-TXD1 ENET2_TX_DATA1

UART8_TXECSPI4_SCLKEIM_EB_B03GPIO2_IO12KPP_ROW06USB_OTG2_PWREPDC_SDDO12


120 Power GND - - -

121 Ethernet ENET2-TXEN ENET2_TX_EN

UART8_RXECSPI4_MOSIEIM_ACLK_FREERUNGPIO2_IO13KPP_COL06USB_OTG2_OCEPDC_SDDO13


UART5_CTS_BCSI_DATA19FLEXCAN2_RXGPIO2_IO03KPP_COL01USDHC2_VSELECTEPDC_SDCE07




UART7_RXI2C4_SDAEIM_EB_B02GPIO2_IO11KPP_COL05EPDC_SDDO11



UART6_CTS_BPWM5_OUTCSI_DATA20ENET2_MDIOGPIO2_IO04KPP_ROW02WDOG1_WDOG_RST_B_DEBEPDC_SDCE08


125 Power GND - - -

126 Ethernet ENET1-RXER ENET1_RX_ER

UART7_RTS_BPWM8_OUTCSI_DATA23EIM_CREGPIO2_IO07KPP_COL03GPT1_CAPTURE2EPDC_SDOEZ



129 LCD LCD-DATA21 LCD_DATA21

UART8_RXECSPI1_SS0CSI_DATA13EIM_DATA13GPIO3_IO26SRC_BT_CFG29USDHC2_DATA1EPDC_SDCE01

LCD interface signal oruniversal GPIO with 3.3Vlogic levels.Internally used as bootconfiguration input (Note 2).

130 Power GND - - -


MQS_RIGHTECSPI1_MOSICSI_DATA14EIM_DATA14GPIO3_IO27SRC_BT_CFG30USDHC2_DATA2USDHC2_DATA2


132 Power GND - - -


UART7_RXCSI_DATA00EIM_DATA09GPIO3_IO22SRC_BT_CFG25USDHC2_DATA7EPDC_GDSP



MQS_LEFTECSPI1_MISOCSI_DATA15EIM_DATA15GPIO3_IO28SRC_BT_CFG31USDHC2_DATA3EPDC_SDCE03





PWM5_OUTCA7_MX6ULL_EVENTOCSI_DATA10EIM_DATA10GPIO3_IO23SRC_BT_CFG26USDHC2_CMDEPDC_BDR01



PWM6_OUTWDOG1_WDOG_ANYCSI_DATA11EIM_DATA11GPIO3_IO24SRC_BT_CFG27USDHC2_CLKEPDC_VCOM00



SAI3_TX_BCLKCSI_DATA21EIM_DATA05GPIO3_IO18SRC_BT_CFG13USDHC2_RESET_BEPDC_BDR00



UART8_TXECSPI1_SCLKCSI_DATA12EIM_DATA12GPIO3_IO25SRC_BT_CFG28USDHC2_DATA0EPDC_VCOM01



SAI3_RX_DATACSI_DATA22EIM_DATA06GPIO3_IO19SRC_BT_CFG14USDHC2_DATA4EPDC_SDSHR



SAI3_TX_DATACSI_DATA23EIM_DATA07GPIO3_IO20SRC_BT_CFG15USDHC2_DATA5EPDC_GDRL



SPDIF_INCSI_DATA16EIM_DATA00GPIO3_IO13SRC_BT_CFG08FLEXCAN1_TXEPDC_PWRIRQ




UART7_TXCSI_DATA01EIM_DATA08GPIO3_IO21SRC_BT_CFG24USDHC2_DATA6EPDC_GDCLK



SAI3_MCLKCSI_DATA17EIM_DATA01GPIO3_IO14SRC_BT_CFG09FLEXCAN1_RXEPDC_PWRWAKE




SAI3_RX_BCLKCSI_DATA19EIM_DATA03GPIO3_IO16SRC_BT_CFG11FLEXCAN2_RXEPDC_PWRSTAT



UART8_RTS_BENET2_1588_EVENT2_OUTSPDIF_OUTGPIO3_IO10SRC_BT_CFG05ECSPI1_SS1EPDC_SDDO05



SAI3_TX_SYNCCSI_DATA20EIM_DATA04GPIO3_IO17SRC_BT_CFG12ECSPI1_RDYEPDC_PWRCTRL00



UART7_CTS_BENET2_1588_EVENT3_INSPDIF_LOCKGPIO3_IO11SRC_BT_CFG06ECSPI1_SS2EPDC_SDDO06



SAI3_RX_SYNCCSI_DATA18EIM_DATA02GPIO3_IO15SRC_BT_CFG10FLEXCAN2_TXEPDC_PWRCOM



PWM1_OUTENET1_1588_EVENT2_INI2C3_SDAGPIO3_IO05SRC_BT_CFG00SAI1_MCLKEPDC_SDDO00




PWM4_OUTENET1_1588_EVENT3_OUTI2C4_SCLGPIO3_IO08SRC_BT_CFG03SAI1_RX_DATAEPDC_SDDO03



PWM2_OUTENET1_1588_EVENT2_OUTI2C3_SCLGPIO3_IO06SRC_BT_CFG01SAI1_TX_SYNCEPDC_SDDO01


156 Power GND - - -

157 LCD LCD-RESET LCD_RESET

LCDIF_CSCA7_MX6ULL_EVENTISAI3_TX_DATAWDOG1_WDOG_ANYGPIO3_IO04ECSPI2_SS3EPDC_GDOE

LCD interface signal oruniversal GPIO with 3.3Vlogic levels.


UART8_CTS_BENET2_1588_EVENT2_INSPDIF_SR_CLKGPIO3_IO09SRC_BT_CFG04SAI1_TX_DATAEPDC_SDDO04


159 Power GND - - -

160 LCD LCD-HSYNC LCD_HSYNC

LCDIF_RSUART4_CTS_BSAI3_TX_BCLKWDOG3_WDOG_RST_B_DEBGPIO3_IO02ECSPI2_SS1EPDC_SDOE


161 LCD LCD-CLK LCD_CLK

LCDIF_WR_RWNUART4_TXSAI3_MCLKEIM_CS2_BGPIO3_IO00WDOG1_WDOG_RST_B_DEBEPDC_SDCLK

LCD interface signal oruniversal GPIO with 3.3Vlogic levels.10R resistor connected inseries.

162 LCD LCD-VSYNC LCD_VSYNC

LCDIF_BUSYUART4_RTS_BSAI3_RX_DATAWDOG2_WDOG_BGPIO3_IO03ECSPI2_SS2EPDC_SDCE00


163 LCD LCD-ENABLE LCD_ENABLE

LCDIF_RD_EUART4_RXSAI3_TX_SYNCEIM_CS3_BGPIO3_IO01ECSPI2_RDYEPDC_SDLE




PWM3_OUTENET1_1588_EVENT3_INI2C4_SDAGPIO3_IO07SRC_BT_CFG02SAI1_TX_BCLKEPDC_SDDO02


165 Power GND - - -


UART7_RTS_BENET2_1588_EVENT3_OUTSPDIF_EXT_CLKGPIO3_IO12SRC_BT_CFG07ECSPI1_SS3EPDC_SDDO07


167 SDIO SDIO1-D0 SD1_DATA0

GPT2_COMPARE3SAI2_TX_SYNCFLEXCAN1_TXEIM_ADDR21GPIO2_IO18ANATOP_OTG1_ID

SDIO interface signal oruniversal GPIO with 3.3Vlogic levels.Used by WiFi/BT module ifbuilt-in SOM.Built-in internal pull-up 10k.

168 Power GND - - -


GPT2_CAPTURE2SAI2_TX_DATAFLEXCAN2_RXEIM_ADDR24GPIO2_IO21CCM_CLKO2ANATOP_OTG2_ID


170 Power GND - - -


GPT2_CLKSAI2_TX_BCLKFLEXCAN1_RXEIM_ADDR22GPIO2_IO19USB_OTG2_PWR


172 Power GND - - -

173 SDIO SDIO1-CMD SD1_CMD

GPT2_COMPARE1SAI2_RX_SYNCSPDIF_OUTEIM_ADDR19GPIO2_IO16SDMA_EXT_EVENT00USB_OTG1_PWR


174 Power GND - - -


GPT2_CAPTURE1SAI2_RX_DATAFLEXCAN2_TXEIM_ADDR23GPIO2_IO20CCM_CLKO1USB_OTG2_OC


176 Power GND - - -177 Power GND - - -178 Power GND - - -


179 SDIO SDIO1-CLK SD1_CLK

GPT2_COMPARE2SAI2_MCLKSPDIF_INEIM_ADDR20GPIO2_IO17USB_OTG1_OC

SDIO interface signal oruniversal GPIO with 3.3Vlogic levels.Used by WiFi/BT module ifbuilt-in SOM.

180 Power GND - - -181 Power GND - - -182 Power GND - - -

183 CSI CSI-PIXCLK CSI_PIXCLK

USDHC2_WPRAWNAND_CE3_BI2C1_SCLEIM_OEGPIO4_IO18SNVS_HP_VIO_5UART6_RXESAI_TX2_RX3

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-WAKE in SOM withWiFi/BT module


186 CSI CSI-DATA6 CSI_DATA06

USDHC2_DATA6ECSPI1_MOSIEIM_AD06GPIO4_IO27SAI1_RX_DATAUSDHC1_RESET_BESAI_TX5_RX0

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-PCM-OUT in SOM withWiFi/BT module

187 CSI CSI-MCLK CSI_MCLK

USDHC2_CD_BRAWNAND_CE2_BI2C1_SDAEIM_CS0_BGPIO4_IO17SNVS_HP_VIO_5_CTLUART6_TXESAI_TX3_RX2

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-ENABLE in SOM withWiFi/BT module


USDHC2_DATA7ECSPI1_MISOEIM_AD07GPIO4_IO28SAI1_TX_DATAUSDHC1_VSELECTESAI_TX0

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-PCM-IN in SOM withWiFi/BT module

189 Power GND - - -


USDHC2_DATA5USDHC2_DATA5EIM_AD05GPIO4_IO26SAI1_TX_BCLKUSDHC1_CD_BESAI_TX_CLK

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-PCM-CLK in SOM withWiFi/BT module


USDHC2_DATA4ECSPI1_SCLKEIM_AD04GPIO4_IO25SAI1_TX_SYNCUSDHC1_WPESAI_TX_FS

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-PCM-SYNC in SOM withWiFi/BT module



USDHC2_DATA3ECSPI2_MISOEIM_AD03GPIO4_IO24SAI1_RX_BCLKUART5_CTS_BESAI_RX_CLK

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-CTS in SOM with WiFi/BTmodule


USDHC2_DATA1ECSPI2_SS0EIM_AD01GPIO4_IO22SAI1_MCLKUART5_RXESAI_RX_HF_CLK

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-TXD in SOM with WiFi/BTmodule


USDHC2_DATA2ECSPI2_MOSIEIM_AD02GPIO4_IO23SAI1_RX_SYNCUART5_RTS_BESAI_RX_FS

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-RTS in SOM with WiFi/BTmodule


USDHC2_DATA0ECSPI2_SCLKEIM_AD00GPIO4_IO21SRC_INT_BOOTUART5_TXESAI_TX_HF_CLK

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-RXD in SOM with WiFi/BTmodule

196 Power CSI-VREF - - Leave open if not used.

197 CSI CSI-HSYNC CSI_HSYNC

USDHC2_CMDI2C2_SCLEIM_LBA_BGPIO4_IO20PWM8_OUTUART6_CTS_BESAI_TX1

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.WLAN-HWAKE in SOM withWiFi/BT module

198 CSI CSI-VSYNC CSI_VSYNC

SDHC2_CLKI2C2_SDAEIM_RWGPIO4_IO19PWM7_OUTUART6_RTS_BESAI_TX4_RX1

Video CMOS sensor signal oruniversal GPIO with 3.3Vlogic levels.BT-HWAKE in SOM withWiFi/BT module



Dimensions

SoMLabsLwowska 505-120 LegionowoPolandTel. +48 22 767 36 20Email: [email protected]://somlabs.com

Disclaimer: The information in this document is provided in connection with SoMLabs products. No license, express or implied, to any intellectual propertyright is granted by this document or in connection with the sale of SoMLabs products. SoMLabs makes no representations or warranties with respect tothe accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at anytime without notice. SoMLabs does not make any commitment to update the information contained herein.

VisionSOM-6ULL Datasheet and Pinout - SoMLabs · VisionSOM-6ULL Datasheet and Pinout -...

Documents

Transcript of VisionSOM-6ULL Datasheet and Pinout - SoMLabs · VisionSOM-6ULL Datasheet and Pinout -...