1www.vissonic.com

VIS-NOVA700 Ethernet Control Unit

Overview:

NOVA700 is an efficient economical controller capable of RS-232, IR, Ethernet working device, with complete TCP/IP protocol smart unit, that is able to expand to more

Features:

l 32bit ARM CPU, 320MHz frequency l 512M Flash memory l 64M data storage l 8 channel COM port from baud rate 600 to 115200bps, RS-232 data is bidirectional transfer to l connect to network instantly l All COM port support send the RS-232/485 commands simultaneously in multi-baudrate l 8 channel bi-directional IR l 1 Ethernet port, up to 10 TCP/UDP connection l 1 VS-NET port, expansion devices can be power controller, volume, dimmer etc. l Compatible with iPhone,iPad and and Android device as control interface.

System Diagram:

2www.vissonic.com

Specification

VIS-NOV700

Basic Specifications Com port Two separate three-wire full-duplex RS-232 port, 6-port 2-wire simplex

Port parameters 600 ~ 115200bps, customizable speed, data bits: 5,6,7,8, stop bits: 1, Parity: None, odd, even, mark. Each port can be individually set parameters

IR port 8-way, one-way independent programmable

Management port RJ45 10 / 100Mbps adaptive Ethernet interface, TCP / IP, UDP protocol, full duplex DB9 serial interfaces, RS485 half duplex interfaces

Run mode TCP / IP UDP Server Management Using HyperTerminal for local management, and has a device detection function

3www.vissonic.com

Security Built-in security IP filtering, set up to eight IP authentication

Port protection With protection ESD15KV

System protection With automatic restart function crash

Reliability Built-in WDT (watchdog timer) to automatically restart trigger

General Specifications

Power supply 12 ~ 24VDC

Power consumption 119 mA @ 12V, 65 mA @ 24V

Dimensions 44.5mm high × 430mm wide × 40mm deep

Weight 0.65kg

Shipping Weight 1.02kg

Vibration ISTA 1A, the carton (International Safe Transit Association)

Certification standards

Safety LVD

EMI / EMC LVD

Environment compliance with the relevant provisions of the RoHS and WEEE

Warranty 3-year parts and labor warranty

VIS-Linkpad16 Ethernet Control

Overview: VIS-Linkpad16 is an efficient keypad controller capable of Relay, RSdevice, and provide a complete control solution with a compressed panel. The keypad is with TCP/IP protocol communication, that is able to expand to more other controlleIOS/Andord phone/ipad as the optional control interface.

Features

l TCP/IP remote connection l Ipad/iphone/Andriod interface control as optional l Real-time feedback, two way communication l Strong robust & limitless expansil COM Port/IR/VS-Net for third party device l Inside watch dog for auto reboot to refresh l Simple programming, fill in necessary control codes to start use in several minutes

Ethernet Control flush-mount unit

is an efficient keypad controller capable of Relay, RS-232, IR, I/O Ethernet working device, and provide a complete control solution with a compressed panel. The keypad is with TCP/IP protocol communication, that is able to expand to more other controller in short time and add the any IOS/Andord phone/ipad as the optional control interface.

Ipad/iphone/Andriod interface control as optional time feedback, two way communication

Strong robust & limitless expansion, to adding as many units as you want Net for third party device

Inside watch dog for auto reboot to refresh Simple programming, fill in necessary control codes to start use in several minutes

232, IR, I/O Ethernet working device, and provide a complete control solution with a compressed panel. The keypad is with TCP/IP

r in short time and add the any

Simple programming, fill in necessary control codes to start use in several minutes

5www.vissonic.com

System Diagram

SpecificationVIS-Linkpad16

Power 24VDC

Communication VIS-Link

Command Programmable button command

and logic command

Software CCU CON16_EN，

State power <0.8W

Button quantity 16

6www.vissonic.com

VIS-NETPW8 Ethernet Power Controller

Overview: The VIS-NETPW8 power controller is easy to install by link to network, user can manage each channel on/off simply choose from the interface on iPad/iPhone or Android system.

Features: l 8 power relay, MAX is 20A, 2200w/channel, total is 16000w l Internal DIP address switch l Internal 8 emergency switch l Rack or surface install l RS-232/VS-Link compatible with ECU controller l 1 channel Ethernet port, up to 10 TCP/UDP connection l Complete safety protection for power/electricity over-load l Power consumption/work status inquiry and management

System Diagram

7www.vissonic.com

SpecificationVIS-NETPW8

Power 24VDC@0.3A, controller, or a separate power supply

Load capacity Single power of 2200W, the total power 16000W

Communication TCP / UDP, VIS-NET (RS-485), RS-232

Number of relay channels 8 channels

Relay contacts structure 1 normal open ; 1 normal closed contacts

Mount Rack or wall mounting

Dimensions 44.5mm high × 430mm wide × 200mm deep

Weight 2.57kg

Shipping Weight 3.43kg

Vibration ISTA 1A, the carton (International Safe Transit Association)

Certification standards LVD

Environment Compliance with the relevant provisions of the RoHS and WEEE

Warranty 3-year parts and labor warranty

8www.vissonic.com

VIS-NETIO32 32 channel IO device

Overview:

VIS-NETIO32 is a 32-channel digital input / output interface device. I / O interface is used as input, it can detect the input switch status (eg sensor alarm / non-alarm state) or the extent of the input voltage (0 ~ 5VDC, such as a voltage sensor), used to connect door sensor, moving detectors, room alarm, motor valve position switches; when used as an output , it can drive a load voltage, commonly used to connect the LED, TTL circuits, control high current relay, wet contacts relays.

Specification

VIS-NETIO32

Power 12VDC

Quiescent Current 26mA

Static power consumption 0.35W

Working Current 35mA

Dimension 44.5Hx430Wx20D(mm) Weight 0.65kg

9www.vissonic.com

VIS-ITD10 Table Dock for IPAD2,IPAD3,IPAD4,IPAD AIR

Overview

VIS-ITD10 is a ideal dock for iPad series to apply in conference room, hotel, smart home and command center etc.

Features l Easy to store and take out the IPAD from the dock l Lock the iPad in the dock with anti-theft screws for installing in public environment l Power supply is available for charging in the dock.

10www.vissonic.com

VIS-IWD10 Wall-mounted Dock for IPAD2,IPAD3,IPAD4,IPADAIR

Overview

VIS-IWD10 is a ideal dock for iPad series to apply in conference room,hotel,smart home and command center etc.

Features l Easy to install and store the IPAD l Supply the power continuously l Lock the iPad in the dock with anti-theft screws for installing in public environment