Vinyl Product Parts Catalog - CM Steel catalog.pdfVinyl Product Parts Catalog “ Precision Parts,...
6
Vinyl Product Parts Catalog “ Precision Parts, for the Fence of the Future ” CM Steel Processing 352 So. Main Clearfield, Ut. 84015 Phone: 1-801-825-2131 Fax : 1-800-219-8066
Transcript of Vinyl Product Parts Catalog - CM Steel catalog.pdfVinyl Product Parts Catalog “ Precision Parts,...
Vinyl Product PartsCatalog
“ Precision Parts, for the Fence of the Future ”CM Steel Processing352 So. Main Clearfield, Ut. 84015
Phone: 1-801-825-2131 Fax : 1-800-219-8066
INDEX
Contents
Post and Handrail Inserts and Towers............
Post and Rail Misc Parts................................
Rail Stiffeners and Brackets..........................
Gazebo and Pergola Parts..............................
Page
1
2
3
4
Phone: 1-801-825-2131Fax : 1-800-219-8066
352 So. Main Clearfield, UT 84015E-mail us at [email protected]
Member AFA
Copyright - CM Steel Prices subject to change without notice.
We can create any special item or fill any need you require upon request.
INDEX
Contents
Post and Handrail Inserts and Towers............
Post and Rail Misc Parts................................
Rail Stiffeners and Brackets..........................
Gazebo and Pergola Parts..............................
UNIVERSAL CORNER/LINE TOWER
Used for anchoring post to concrete or wood decks. This tower comes in 24, 36 and 48 inches standard lengths . 14 ga
with a 1/4” base. Custom lengths upon request.
LINE TOWER
Used for anchoring line post to concrete or wood decks. This tower comes in 24,
36 and 48 inches standard lengths . 14 ga with a 1/4” base.
Custom lengths upon request.
THREE SIDED TOWER
Used where extra strength is required. 24, 36 and 48 inches standard lengths.
16 ga with a 1/4” base. Custom lengths upon request.
(LG) = Length (GA) = Gauge
P/N 4” = P111- (LG)5” = P110 - (LG)
P/N 4” = P115 - (LG)5” = P118 - (LG)
P/N 4” = P113 - (LG)5” = P112 - (LG)
P/N 4” = P131 - (GA)-(LG)5” = P130 - (GA)-(LG)
P/N 4” = P128 - (GA)-(LG)5” = P129 - (GA)-(LG)
GATE POST INSERT
For 4” & 5” tube 14 ga is standard and holds most gates up to 48”.
12 ga. upon request
3 SIDED GATE POST INSERT
For 4” & 5” tube. Used for heavier gates 14 ga. is standard. 12 ga. upon request
ECONOMY Z POST INSERT
An economical way to strengthen line posts, great for high wind applications.
Page 1
P/N 4” = P133 - (GA)-(LG)5” = P134 - (GA)-(LG)
Phone: 1-801-825-2131Fax : 1-800-219-8066
352 So. Main Clearfield, UT 84015E-mail us at [email protected]
Member AFA
Copyright - CM Steel Prices subject to change without notice.
We can create any special item or fill any need you require upon request.
RAIL TIES
This tie fits inside the top of the post and secures to the rails. This keeps the rail from moving and is a must on porch
railings. 18 ga material.
GROUND SLEEVES
Used for easy removal of fence sections as needed. This will allow access to yards.
the sleeve should be cemented into the ground. 16 ga material, 24” long
(LG) = Length (GA) = Gauge
P/N 4” = P355- 45” = P355 -5
P/N 4” = P180-4 - (LG)5” = P180-5 - (LG)
P/N 4” = P278 5” = P277
P/N = P160 - (GA)-(LG) P/N 4” = G340-45” = G340-5
HEAVY DUTY POST INSERT
Where the need for superior rigidityis required.
GATE CORNER
Page 2
SIDE RAIL MOUNT
Superior Deck Bracket. Attaches to inside or outside of a deck.
Copyright - CM SteelPrices subject to change without notice.
We can create any special item or fill any need you require upon request.
Phone: 1-801-825-2131Fax : 1-800-219-8066
352 So. Main Clearfield, UT 84015E-mail us at [email protected]
Member AFA
Page 3
RAIL STIFFENER - J - 2 X 3 1/2
Provides added strength and rigidity to rails. Used in bottom rails to prevent sagging.
May be required to satisfy building codes.18 ga for lengths 96” and under.
ANGLED RAIL BRACKET
Allows a handrail to be secured to a wall at an angle upto 45 degrees . Vinyl rail must be attached to the bracket.
Bracket can be reversed for horizontal installation.
(LG) = Length of item (GA) = Gauge of metal (LG) = Length (GA) = Gauge
P/N RF121-24 (LG)
P/N R135- (GA)-(LG )
P/N R100 = 1 3/4” R101 = 2”
ROLLFORM STIFFENER U 1 1/2” X 5 1/2”
Provides the same strength as 18 ga. Steel at a fraction of the cost. Made from 24 ga. galvanized steel.
NOTE : The rail stiffeners you use are varied and sometimes depend on the vinyl rail being used. We can fabricate any dimension, length or shape ( J, U, L )you require. The rails shown above are standard types, if they don’t fit your application
let us know. The same applies to brackets.
When ordering gauge, use the following:
Sample : R121 (GA) - (LG)R121 (8) - (72)
8 = 18 ga6 = 16 ga4 = 14 ga2 = 12 ga
Copyright - CM SteelPrices subject to change without notice.
We can create any special item or fill any need you require upon request.
Phone: 1-801-825-2131Fax : 1-800-219-8066
352 So. Main Clearfield, UT 84015E-mail us at [email protected]
Member AFA
C - CHANNELSSpans up to 16’ , two 8’ sections joined by one 4’ C-splice section.
Fits Hollow Rail 2”x 6” or 2”x 8” .No Welding Required.
You can add extra 4’ and 8’ sections to fit larger spans.
GAZEBO & PERGOLA PARTS
P/N R141-6R141-8
HEADER BRACKETThis bracket works in cpnjunction with C- Channel R141 for mounting channels
to a wall in pergola applications.
2 x 6 C- BRACKETGoes into the end of a rail so that it can
be secured to a wall or pillar.May be required to satisfy bulding codes.
P/N R102P/N R174-6
R174-8
Used for corner or end Used for corner or end Used for corner or end
VERTICAL CORNERS & LINESUsed on Pergolas and Gazebos. Lengths from 60” to 96”. For 5” vinyl tube. Meets code for residential applications.
P/N PG134 (LG) P/N PG130 (LG) P/N PG160 (LG)
Page 4
