VIKINGINTERNATIONAL

VIKINGOILFIELD SERVICES

VIKINGC O I L T U B I N G

VIKINGOILFIELD SERVICES SRL

VIKINGINTERNATIONAL LIMITED

VIKINGGEOPHYSICAL SERVICES

VIKINGS E R V I C E S

VIKINGD R I L L I N G

VIKINGINTERNATIONAL

VIKINGOILFIELD SERVICES

VIKINGOILFIELD SERVICES SRL

VIKINGGEOPHYSICAL SERVICES

VIKINGS E R V I C E S

PMS CMYK

CONTACT USBD@viking-intl.com

Dubai Office

Viking Services DMCC.PO-Box 181525Unit 13H, Almas Tower, Jumeirah LakesTowersDubai, UAE+971 45584506+971 45584507

Budapest Office

Forgách u. 11-131139 Budapest, Hungary+36.1.370.3283 Office+36.1.370.2304 Fax

Diyarbakir Facility

Urfa Yolu 12. KmM-OIL Arkasi, Gozeli | Diyarbakir, Turkey+90.412.255.0523 Office+90.412.255.0529 Fax

Ankara Office

Sehit Ersan Cad. No24/7 CankayaAnkara, Turkey+90.312.666.3250 Office+90.312.466.2142 Fax

Tekirdag Office

Hayrabolu Yolu Uzeri 8.Km59100 Merkez | Tekirdag, Turkey+90.282.258.2100 Office+90.282.258.2141 Fax

Aydin Facility

Aydin Denizli Yolu Uzeri UmurluBeldesi Aydin Organize SanayiBölgesi AOSB 282. Ada 3. Parsel+90.256.218.0340 Office

INTEGRATED SERVICESWell Engineering and Design

Hydrocarbon ...........................................................................

Geothermal .............................................................................

Drilling ServicesDrilling Services .....................................................................

Underbalanced Drilling Services ...........................................

Mudlogging Services .............................................................

Directional Drilling Services ....................................................

Energy ServicesWireline Services ....................................................................

Fracturing Services ...............................................................

Acidizing Services ..................................................................

Cementing Services ..............................................................

Completion Services ..............................................................

Well Testing Services .............................................................

Coiled Tubing Services ...........................................................

Rentals Services ....................................................................

Geophysical Services ..........................................................Civil Engineering and Transportation

Dirt Services ..........................................................................

Transportation Services Supplies & Logistics Services ................................................

VIKINGINTERNATIONAL

VIKINGOILFIELD SERVICES

VIKINGC O I L T U B I N G

VIKINGOILFIELD SERVICES SRL

VIKINGINTERNATIONAL LIMITED

VIKINGGEOPHYSICAL SERVICES

VIKINGS E R V I C E S

VIKINGD R I L L I N G

VIKINGINTERNATIONAL

VIKINGOILFIELD SERVICES

VIKINGOILFIELD SERVICES SRL

VIKINGGEOPHYSICAL SERVICES

VIKINGS E R V I C E S

PMS CMYK

LONG STANDING CUSTOMER RELATIONS

IndependentContractor

VIKINGINTERNATIONAL

VIKINGOILFIELD SERVICES

VIKINGC O I L T U B I N G

VIKINGOILFIELD SERVICES SRL

VIKINGINTERNATIONAL LIMITED

VIKINGGEOPHYSICAL SERVICES

VIKINGS E R V I C E S

VIKINGD R I L L I N G

VIKINGINTERNATIONAL

VIKINGOILFIELD SERVICES

VIKINGOILFIELD SERVICES SRL

VIKINGGEOPHYSICAL SERVICES

VIKINGS E R V I C E S

PMS CMYK

Drilling Services

Energy Services

Geophysical Services

Support Services

VS-BRO-02/17/2015

Viking Services is a fully integrated service company that provides services to the oil and gas and geothermal industries with the goal of becoming the most trusted and reliable service company in Turkish, Middle Eastern, North African and European markets.

Viking International and Viking Geophysical were originally formed as wholly owned subsidiaries of TransAtlantic Petroleum Corporation (TSX: TNP & AMEX: TAT) in 2008, with the primary objective of servicing the exploration and development needs of TransAtlantic. To facilitate TransAtlantic’s need for services, Viking established seismic acquisition, location construction, drilling, cased-hole wireline, fracture stimulation, cementing, acidizing, mudlogging, underbalanced drilling, trucking, well testing, workover and rental services. As a result, Viking Services is now recognized as the only industry standard non-NOC oilfield service provider in Turkey.

In 2012, as the growing demand for oilfield services was permeating Turkish, Middle Eastern, North African and European regions, TransAtlantic decided it was time to make Viking Services an independent company to realize growth potential and segregation of business focus. As a result, in June 2012, Viking International, Viking Oilfield Services and Viking Geophysical were acquired by Viking Services BV. Viking Services is a partnership between The Mitchell Group, Abraaj Capital, and BXR.

The acquisition strengthens Viking Services’ position as a fully integrated oilfield service group focused on providing services in the conventional and unconventional resource plays in Turkey, Poland, Bulgaria, Romania, Kurdistan and other key Eastern European and Middle Eastern countries. The combined group boasts a strong portfolio of services across the well life, with a fleet of modern, technologically advanced equipment. With strong backing from its owners, Viking Services intends to continue investing capital to expand its presence and service base across Turkey, the Middle East, North Africa and Eastern Europe.

Mitchell Group founder, N. Malone Mitchell 3rd, has a longstanding history in the oilfield services sector. Mr. Mitchell founded Riata Energy, Inc. in 1985, and within the first five years of business began acquiring small energy producers. By the mid 1990s Riata began acquiring its own drilling rigs through its drilling subsidiary, Lariat Services (see www.lariatservices.com, www.sandridgeenergy.com). In 2006, Riata was re-named SandRidge Energy, Inc. (NYSE: SD). At the time of the acquisition, Riata had built a fleet of forty-six drilling rigs, an extensive fleet of workover units and related service equipment. Riata and its subsidiary, Lariat Services, were drilling one well per day, becoming one of the largest privately held energy companies and the largest privately held land driller in the United States. The Mitchell Group is reflective of the Mitchell family investments worldwide in oil and gas, consumer goods, and real estate sectors.

HISTORY

6

VS-BRO-02/17/2015

The Abraaj Capital group is a leading private equity investor, purpose-built for operating in the growth markets of Africa, Latin America, the Middle East, South Asia, South East Asia, Turkey and Central Asia. Employing over 300 people, Abraaj has more than 25 offices spread across six regions with hubs in Singapore, Mexico City, Dubai, Mumbai, Nairobi and Istanbul. The Group currently manages US$ 7.5 billion across more than 20 sector and country-specific Funds, encompassing private equity and real estate (primarily yield-generating) investments. Abraaj has returned c. US$ 4.2 billion to investors from over 70 full and partial exits. Funds managed by Abraaj currently have holdings in over 140 partner companies across 10 sectors including consumer, energy, financials, healthcare and utilities. (www.abraaj.com)

BXR Group, headquartered in Amsterdam, Netherlands, is an international private investment group with 17 years track record of superior investment performance across a variety of industry sectors. While BXR Group’s reputation was built on its founders’ successful investment performance in Central Europe, today the group has a diverse range of global interests, including Western Europe, the Americas, Africa, Asia and Australasia. BXR Group seeks majority control positions or significant minority stakes alongside similarly minded partners in its investee companies. The group has an established track record of accessing the international debt and equity capital markets for large and high profile transactions. BXR Group’s investment philosophy is based on a partnership approach, working closely with highly motivated management teams and well-trained, incentivized workforces. BXR Group currently employs over 35,000 people through its portfolio companies. (www.bxrgroup.com)

While Viking Services continues to penetrate new markets worldwide with its integrated service offerings, the focus remains the same — to provide unparalleled customer service by focusing on safety, reliability, and performance.

7

EXPERTISE & SERVICE

M I S S I O N S T A T E M E N T :“ We at Viking Services are committed to Integrated Service through experienced personnel and modern equipment to execute North American unconventional resource development

in Turkey, Eastern Europe, North Africa, and the Middle East.”

Keys to Success:

Experience Where it Matters: With a dedicated management team and active in-field personnel Viking Services is built on decades of experience across all aspects of the life-cycle of the well. Our goal is to provide expertise, in conjunction with our services, to operators looking for value and experience from their partners.

Project Design: We can provide both basic and detailed screening and engineering due diligence to select and quantify the benefits of our advanced technology for your wells. Engineering Support: A full-time global staff of experienced reservoir and well engineers help a project live up to its potential. Our engineers add a layer of global operational expertise to compliment your domestic and regional experience, ensuring value when choosing us as your partner.

Modern Equipment: Viking Services prides itself on acquiring current, technologically advanced equipment in the region. This equipment, coupled with the experienced on-site operators, will enable us to execute your project efficiently.

Results Driven: Our goal is to always understand our partner’s expectations, needs, and concerns. Once we have a thorough understanding of these areas our staff of project managers, well site engineers, well site supervisors, and equipment specialists have training and field experience to meet and exceed these expectations. We understand that our success is dependent upon the success of our partners.

To manage health, safety, security, and environmental (HSSE) issues of oil and gas activities is a matter of managing risks. Reducing these risks is the key to efficient and sustainable production, employees going home safely at the end of the day, and a cleaner environment. Viking Services is committed to the health, safety, and security of its personnel, clients, and others with whom it interacts. Our partners have particularly wide variations in environmental risk exposure and environmental management capability. In this regard, Viking Services targets and encourages more sustainable practices as environmental regulations and public concerns about the environment continue to increase.

Viking Services HSSE division has a positive team-player approach to personnel instead of an authoritative perspective. The initiative and knowledge in HSSE of Viking Services personnel, supported by commitment of our management, is the core of the safety culture that we are building together.

HEALTH / SAFETY / SECURITY / ENVIRONMENTAL SERVICES

Viking Major HSSE Services

• Implementing HSSE Management Program and Policy

• Applying Corporate HSSE Objectives and Targets

• Planning, Implementation, Monitoring, and Control

• Trainings and Raising Awareness

• Ensuring VI Complies with Legal (national) and Industrial Requirements

• Risk Assessments

• Audits and Inspections

• Management reviews and meetings on HSSE issues

• Documentation and Data Control

• Accidents, Incidents, Non-compliance Reporting

• Corrective and Preventive Action Procedures

• Emergency Response Procedures

• PPE Supply

• Private Security Personnel

• HSE Experts at Field

INTEGRATED PROJECT MANAGEMENT DIVISION

Integrated Project Management (IPM)

Viking Services provides an experienced project management team at the core of its business for the sole purpose of delivering higher production, improving efficiencies, and reducing operational costs. The IPM group operates across all product lines, acting as the key focal point for any customer seeking technical support and a diverse range of integrated well solutions.

The successful execution of a project, such as well construction, well intervention, or well optimization, is always determined by an effective, centralized planning process and the availability of services that are strategically aligned with the customers objectives.

By offering integrated project management, Viking Services has the ability to draw on a wide range of in-house services while providing an end-to-end management function to ensure dedicated project assessments and well engineering through drilling, completion and production services.

Viking Services strongly believes in providing integrated services to perform seamless operations with added value to its customers.

The primary objectives of the IPM group is to streamline the overall project from the original inquiry and planning stage through to execution and completion without the customer having to deal with multiple operations and service companies.

Under this process the “Viking to Client” interface becomes simplified, while dramatically improving the efficiencies of the project and allowing each of the operational departments to focus solely on their well-site responsibilities.

Well Site Construction

Engineering Design

Geological Evaluation

Drilling & Workover Rigs

Mudlogging & Drilling Fluid

UBD & MPD Services

Directional Drilling Services

Wireline Logging Services

Cementing Services

Frac & Stimulation Services

Coiled Tubing Services

Well Testing Services

Well SiteOperations

VikingIPM Client

OUR COMPANY

EXECUTIVE MANAGEMENTAHMED LOTFY | Chief Executive Officer

Ahmed Lotfy has over three decades of experience in the Oil and Gas Services sector having spentthe majority of his career at Halliburton prior to joining Viking Services as its Chief Executive Officein 2016. Prior to leaving Halliburton, Mr. Lotfy sat on the Company’s Executive Committee andserved as its President of the Eastern Hemisphere which encompassed the Middle East, Africa,Asia Pacific and Europe regions from 2007 to 2011. In this role, Ahmed was responsible forHalliburton’s operations across 55 countries.

Previously, Mr. Lotfy also served as a product line manager and as the business developmentmanager for Halliburton in the Middle East region. He also held a variety of engineering andmanagerial positions in Houston, Saudi Arabia, Kuwait, Malaysia, Egypt, Sudan and Libya during a34-year career with Halliburton.

Mr. Lotfy is a graduate of the Faculty of Science at Ain Shams University in Cairo with a major inChemistry.

CHARLES ‘RANDY’ ARNOLD | Chief Operations OfficerRandy Arnold serves as Viking Services President of Drilling Operations. His responsibilities includedeveloping and refining the drilling operations division from the ground up, including the continuousimprovement and development of all aspects of Management Systems, Safety, Marketing,Administration and Operations. Mr. Arnold joined Viking Services in 2011 as Vice President /Country Manager, Iraq, where his responsibilities included the development and growth ofViking Services’ operations in Northern Iraq. Mr. Arnold has over 39 years of worldwide experiencein all phases of drilling contractor management, with emphasis on “hands-on” operations havingstarted in the industry at an entry level position of Assistant Driller Trainee in the UK and Norwegianoffshore sectors of the North Sea. Mr. Arnold worked upwards through all key rig positions,culminating in promotion to Offshore Installation Manager. He was subsequently promoted andtransitioned into the shore-based management side of operations, where he continued to advancethrough various senior management positions in the industry.

Mr. Arnold brings with him exceptional planning, team building, and management skills with ademonstrated ability to resolve difficult operational problems and manage and execute complexprojects and operations both on and offshore. He has a proven ability to work with multi-national andmulti-cultural work forces, having worked in or been a resident in, over 17 countries, including Northand South America, the UK and Europe, the Middle East, Russia, West Africa, China and SoutheastAsia. Most recently, Mr. Arnold served in the capacity as Director of International Operations withNabors Drilling International where he was employed for 15 years. Prior to that, he served in varioussenior management and operations positions with major drilling contractor and operators in variouscountries world-wide, including Sedco, Tenneco, Wilrig and Atwood Oceanics.

Mr. Arnold attended Southern Methodist University majoring in Mechanical Engineering, followedby Drilling Technology Studies at University of Texas Petroleum Extension in Odessa, Texas. He alsoholds industry certifications of USCG Master, Mobil Offshore Drilling Units, MMS Certified Well ControlInstructor and UK Offshore Installation Manager.

EXECUTIVE MANAGEMENTROB DUNN | President of Geophysical ServicesRob Dunn serves as Viking Services President of Geophysical. Mr. Dunn’s responsibilities includecontinuous strategic alliances with IOC/NOC’s ranging from preferred service providers to overall projectmanagement focusing on the frontier regions to the mature basins. Mr. Dunn has developed a dynamicteam of field management employees to industry experts in geophysics encompassing over 21 yearsof industry expertise and experience. Mr. Dunn brings a vast level of experience to Viking Geophysicalhaving acquired seismic data in all types of landscape, both land and shallow water based, with an indepth knowledge base of mountainous terrain.

In Mr. Dunn’s experience within the geophysical industry he has held positions ranging from operationssupervisor to technical manager. Mr. Dunn has played a pinnacle role in the development, promotion andfield testing of new and emerging seismic technologies and was instrumental in the successful launch ofwireless acquisition technology in Turkey. Mr. Dunn continues to development new emerging geophysicalprocesses to assist the industry in safe and operationally efficient practices.

Mr. Dunn holds several technical certifications from the industries leading equipment manufactures.In addition to a technical background Mr. Dunn is a member of the following organizations. Society ofGeophysicists/EAGE and American Chamber of Commerce.

BOARD OF DIRECTORSAHMED BADRELDIN | DirectorAhmed Badreldin is a Senior Partner at Abraaj Capital based in Dubai. He is Co-Head of Large CapPrivate Equity and a member of the Firm’s Executive and Investment Committees. In addition he overseesin Firm’s activities in Egypt. Since joining Abraaj in 2008, Mr. Badreldin has been responsible for Abraaj’sportfolio investments in GEMS, AlBord, Spinneys, Stanford Marine, and Tadawi in addition to the executionof Viking Oilfield Services and Kuwait Energy.Before joining Abraaj in 2008, Mr. Badreldin was a Senior Director in Sponsor Coverage and LeveragedFinance at Barclays Capital, the investment banking of Barclays Plc in London, where he spent over 8years. Previously he also worked at Baker Hughes.

Mr. Badreldin holds a Bachelor degree in Mechanical Engineering (Industrial Management) and BusinessAdministration from the American University in Cairo and an MBA from the Cranfield School ofManagement in the UK. He serves as a director of Integrated Diagnostics (AlBorg), Spinneys, StanfordMarine and Mediaquest and is a board member of Endeavor Egypt.

GABOR ILLES | DirectorGabor Illes is a founding partner of BXR Partners LLP, the in-house investment advisory arm of BXRGroup, a leading international investment group headquartered in Amsterdam. Mr. Illes is responsiblefor originating and executing private equity investments globally and he is a member of the InvestmentAdvisory Committee. Mr. Illes worked for the UK arm of a predecessor of the BXR Group between 2008and 2010 prior to which he had a ten year career in investment banking with Credit Suisse First Boston inLondon.

A British and Hungarian citizen, Mr. Illes earned a MSc in Business Administration (First Class Hons)from Corvinus University, Budapest and a CEMS Master’s degree in International Management from theNorwegian School of Economics, Bergen. He holds several non-executive board positions at portfoliocompanies affiliated with BXR Group.

SMIYET BELRHITI | DirectorSmiyet Belrhiti has over 14 years of private equity, corporate finance and consulting experience. Mr.Belrhiti is director part of the investment management team of Abraaj responsible for screening, structuringand executing investment opportunities as well as managing portfolio companies in the Middle East andNorth Africa region. Mr. Belrhiti is currently a board member of a number of portfolio companies ofAbraaj including Viking Oil Field Services, Stanford Marine Group and CEPRO.

DERK STIKKER | DirectorDerk Stikker is the Chief Executive Officer of BXR Group and is a director of a number of PortfolioCompanies of BXR Group. He started his career as a banking consultant in the United States. Afterreturning to Europe, he became active within the oil and gas sector and was subsequently Chief FinancialOfficer of IMC, a Dutch financial institution. He joined BXR Group in 2007, initially as Chief FinancialOfficer of RPG Property and subsequently as Chief Operating officer and Chief Executive Officer of BXRGroup. A Dutch Citizen, he holds an MBA from the George Washington University in Washington D.C. inthe United States.

WELL ENGINEERING AND DESIGN

• Hydrocarbon

• Geothermal

HYDROCARBONHydrocarbons are a naturally occurring organic compound comprised of hydrogen and carbon. Hydrocarbons can be as simple as a methane chain (CH4), but most are very complex molecules, which can occur as solids, liquids, or gases. The molecules can take the shape of chains, branching chains, rings, bonded rings, or other structures. Petroleum is a mixture of hydrocarbons found in rock under the surface of the earth, most commonly as coal, oil, and natural gas.

VS-BRO-02/17/2015

GEOTHERMALGeothermal Energy

Viking Services is equipped to perform every aspect in relation to drilling for Geothermal Energy. The same modern technology used to drill hydrocarbons is advantageous in drilling for Geothermal Energy. From Formation mapping with 3D Seismic to Formation Stimulation or Reactivation, Viking Services provides the necessary tools and expertise to make your project successful.

DRILLING SERVICES

• Drilling Services

• Underbalanced Drilling Services

• Mudlogging Services

• Directional Drilling Services

VS-BRO-02/17/2015

CONTRACT DRILLING RIGS

Viking Services provides onshore contract drilling services with an ever expanding fleet of marketable land-based drilling rigs that operate primarily in the oil and natural gas producing regions within the MENA and CEE areas. Viking’s Drilling Services team is performance-oriented, providing technologically advanced equipment, extensive industry experience, a safe operating environment, and quality service to our clients in the worldwide oil and gas industry.

We continue to invest in our rig fleet, thereby enhancing the quality and versatility of Viking Services’ rigs by upgrading and/or acquiring highly specialized rigs that lend themselves to reconfiguration for new drilling applications necessary to exploit advancements in technology. We engineer and build rigs to accommodate the drilling needs of wells in different operational areas.

We are committed to exceeding the drilling efficiency, safety, and quality requirements of our client. We are guided by the following principles: people are our greatest asset, safety is our foremost responsibility, and financial discipline and operational excellence is our work ethic.

Our technology, expertise, and quality equipment help us deliver results to challenging drilling projects and meet stringent client demands. We design rigs with automated features that reduce nonproductive time and increase safety by eliminating operational hazards and distancing people from dangerous areas.

22

Viking Services delivers a fully integrated drilling system using modern technology and extensive oilfield experience. Viking Services also offers a full line of complementary rental services.

Viking Services’ Contract Drilling group is headquartered in Dubai, UAE where a team of experienced employees provide operational, business development, management, and logistical support to our offices worldwide.

Services that can be provided, but are not limited to, include:

Drilling Services

• Total Project Management Services

• Directional Drilling Services

• Underbalanced Drilling

• Fishing & Re-Entry Services

• Casing Running and Handling Services

• Drilling Rental Tools

• Tubular Running Services

• High-Pressure Well Control Equipment

• Specialty Drill Pipe

• Top Drives

• Drilling Recorders and Monitoring Systems

• Rig Mobilization Equipment

• Equipment Upgrades

• Customized Rig Design

• Drilling Consultation

VS-BRO-02/17/2015

RIG FLEET X-REFRigNo

CurrentLocation

InputHP

HookLoad(Lbs)

RatedDepth(Mtr)

DrillLineSize(In)

TopDrive

Capacity(Tons)

RotaryTable

Size (In)

MudPumpNo. 1

MudPumpNo. 2

MudPumpNo. 3

ActivePit

VolumeShakers BOP

(PSI)

DRILLING RIGS

I-7 Turkey 650 355,000 2,000 1-1/8 None None PZ-7 PZ-7 412 1 5,000

I-8 Turkey 1,000 500,000 4,000 1-1/4 None 27-1/2 F-1300 F-1300 1,000 2 10,000

I-9 Turkey 1,000 500,000 4,000 1-1/4 None 27-1/2 F-1300 F-1300 1,000 2 10,000

I-10 N. Iraq 2,000 1,000,000 7,700 1-1/2 500 37-1/2 F-1600 F-1600 F-1600 2,000 3 10,000

I-11 N. Iraq 2,000 1,000,000 7,700 1-1/2 500 37-1/2 F-1600 F-1600 F-1600 2,000 3 10,000

I-13 Turkey 1,000 530,000 4,500 1-1/4 None 27-1/2 F-1600 F-1600 1,100 2 5,000

I-14 Turkey 1,000 450,000 4,000 1-1/4 None 27-1/2 F-1600 F-1600 1,100 2 5,000

I-16 Turkey 450 210,000 1,400 1 PS - 100 None TT660 TT660 600 1 3,000

I-21 N. Iraq 2,000 1,000,000 7,700 1-1/2 500 37-1/2 F-1600 F-1600 F-1600 2,000 3 10,000

I-22 Romania 2,000 1,000,000 7,700 1-1/2 500 37-1/2 F-1600 F-1600 F-1600 2,000 3 10,000

I-25 Turkey 460 275,000 1,500 1-1/8 None 17-1/2 E-600 E-600 469 1 5,000

I-26 Turkey 550 250,000 2,000 1 None 20-1/2 E-800 E-800 470 1 3,000

I-27 Turkey 750 365,000 3,200 1-1/8 None 20-1/2 F-1000 F-1000 560 2 5,000

I-28 Houston 1,300 440,000 4,000 1-3/8 200 27-1/2 WH-1312 WH-1312 1000 2 5,000

I-29 Oman 1,500 600,000 4,250 1-5/8 272 27-1/2 WH-1312 WH-1312 1000 2 5,000

I-30 Oman 1,500 600,000 4,250 1-5/8 272 27-1/2 WH-1312 WH-1312 1000 2 5,000

I-31 Houston 1,300 440,000 4,000 1-3/8 200 27-1/2 WH-1312 WH-1312 1000 2 5,000

I-34 Turkey 1,090 500,000 4,000 1-1/4 250 27-1/2 3NB-1300 3NB-1300 1300 2 10,000

I-35 Hungary 1,600 700,000 5,000 1-3/8 500 27-1/2 3NB-1600 3NB-1600 1300 2 10,000

WORKOVER/PULLING UNITS

P-5 Turkey 665 250,000 4,000 1 PS - Opt. None Optional Optional Optional Optional

P-6 Turkey 350 180,000 3,000 7/8 None None Optional Optional Optional 5,000

UNDERBALANCED DRILLING SERVICES

A Full Circle of Service from the UBD Regional Leader It’s no accident that the Viking Services’ name is synonymous with Underbalanced Drilling (UBD) technology and air drilling. We saw the necessity for UBD technologies and services back in the mid 1980’s while drilling in the West Texas Overthrust. Viking dedicated the resources, realized our vision, and are now leaders with hundreds of successful UBD wells to our credit.

What is Underbalanced Drilling and Why Use It?Underbalanced drilling is the intentional reduction of drilling fluid density to lower hydrostatic pressure in a wellbore so that it is lower than formation pore pressure. In underbalanced reservoir drilling (UBD), the emphasis is on protecting the formation, particularly in low-pressure, depleted reservoirs. Encouraging the reservoir to flow while it is being drilled avoids creation of wellbore buildup and its associated negative impact on well productivity and reservoir recovery. Lower pressure in the wellbore also increases ROP, prolongs bit life, and prevents fluid loss into the formation, making differential sticking unlikely. These benefits allow for enhanced production and reservoir recovery which increases the economic viability, resulting in quicker payout for wells.

Or, more simply put, underbalanced drilling maintains hydrostatic wellbore pressure below formation pressure while drilling.

Underbalanced Drilling

Drilling Benefits

• Lower pressure in the wellbore encourages oil/gas flow, reducing formation damage.

• Lower pressure in the wellbore increases the rate of penetration, prolongs bit life and increases flow.

• Lower pressure means less fluid loss when drilling, resulting in reduced drilling fluid costs, a decrease in lost circulation time, and less non-productive time.

Numerous Geological and Pay Identification Benefits

• Normal Triple-Combo or Quad-Combo Can be Run

• Addition of Temperature Log Identifies Gas Flow Into Wellbore

• Aides in Quickly Identifying bypassed productive zones

Completion Benefits

• No Drilling Mud to Clean up From Formation or Fractures

• Allows for Zones to be Quickly Tested

• Less Cleanup Time During Flowback / Swab Testing

• Decreased Rig / Testing Costs

Production Benefits

• Ability to jet in a well

• Replaces the need to swab out a well

• Immensely reduces fluid loss

For decades, our operations in West Texas relied on air drilling to get through hard fractured limestone formations quickly and without costly fluid losses. Air drilling uses mist or foam as the drilling fluid, increasing ROP and lengthening bit life and ,although air drilling is an “old” technology in the U.S., it holds bright promise in the Eastern Hemisphere.

Viking Services consists of a team of management and drilling personal that have drilled hundreds of underbalanced wells and have an excess of over 100 years of experience collectively in Underbalanced Drilling. We are well positioned to provide expertise, in conjunction with our equipment and services, to operators looking for value and experience from their partners.

Underbalanced Equipment

Mobile Air Drilling Packages

• Various sized Mobile Air Drilling Packages (complete with compressors and boosters) are available

• Stand-alone compression and booster packages

• Nitrogen units complete with separators, heaters and power

• Air/Foam/N2 rates capable of drilling any hole size to any depth

• UBD accessories such as hammers, hammer bits, blooie lines, rotating heads, etc.

Engineering Services

• Full service engineering design for underbalanced applications

• Air/Foam/Mist/Aerated Mud simulations for best formation response

MUDLOGGING SERVICES

MUDLOGGING SERVICES

Viking Services provides high quality “Mudlogging Service” using advanced drilling monitoring operation systems which are capable of gas detection, electronic monitoring, and database recording for a full range of drilling parameters on operations.

Our services are centered on 3 key components1. High quality geological logging by experienced personnel and wide range equipment inventories2. Assisting to optimize drilling rates and reduce drilling cost by monitoring drilling parameters3. Safer drilling by measurement of all hazardous ambient gases

Mudlogging Services

• Monitoring numeric and graphic screen

• Remote connection and real time presentation

• Real time measured and calculated data collection

• Drilling operation status detection and determination

• Three independent mathematical models for lag values calculation with user customizable correction factors:

◦ Mud lag calculation

◦ Gas lag Calculation

◦ Sample lag calculation

• Real-time hydraulics calculation

• Real-time overpressure parameters calculation (“d” exponent, Sigma, pore pressure, fracture gradient, ECD, etc.)

• Real-time vertical depth calculation based on entered deviation survey data

• Subsequent processing and data interpretation

• Values can be displayed in user selectable/customizable output units

• Two independent depth databases that are simultaneously being recorded during system real-time operation:

◦ Metric database - records based on metric intervals

◦ Foot database - records based on foot intervals

• Two types of time databases that are simultaneously being recorded:

◦ Archive database - 24 hours of records created for every day

◦ Circulating buffer - records for last 24 hours.

DIRECTIONAL DRILLING SERVICES

Directional Drilling Services

Our team of professionals are ready to apply years of experience to any directional drilling applications. This includes the development of well plans using industry leading technology, HawkEye 3D, which allows for three-dimensional viewing of well plans, torque and drag analysis, hydraulic programs, and anti-collision planning.

Having the tools to do the job is an important measure of a directional drilling company. Our team of directional drillers bring years of experience in drilling many different well types, including but not exclusive to; build and hold, horizontal, or multi-leg horizontals wells. Equipped with BICO Evenwall motors gives Viking Services a competitive edge, allowing an increase in motor durability and overall motor performance compared to conventional motors. We understand that creating strong productive wells is the goal of the drilling industry and that the use of our Logging While Drilling (LWD) packages can offer the information necessary to make the real time decisions that can make long term impacts.

Localized in Diyarbakir, the Down-Hole Maintenance Shop, and the M/LWD Technical and Operations Center provide the direction and servicing for our field operations. Having a full level III servicing facility in country allows us to minimize costs and decrease turnaround times. Viking Services realizes each client will have unique needs and understands that the directional drilling business is an actively changing environment and is constantly updating our drilling practices by assessing new technologies. We look forward to creating solutions to any directional drilling challenges the industry can provide.

Well Types

Services

Software and Equipment

• MWD Services

• LWD Services

◦ Gamma Ray

◦ Resistivity

• Mud Motor Rentals

• HawkEye 3D

• QMWD Software

• LogView II

• CenterFire Tool

◦ Used in resistivity reading

• Bico Mud Motors

• Non-Meg Drill Collars

• Vertical (deviation control)• Build and Holds• S Wells• Horizontal• Multi Leg Horizontals

ENERGY SERVICES

• Wireline Services

• Fracturing Services

• Acidizing Services

• Cementing Services

• Completion Services

• Well Testing

• Coiled Tubing Services

• Rental Services

WIRELINE SERVICESCased Hole Wireline Services

Viking Services excels in all facets of Cased Hole Wireline Services. We provide a complete line of products and services including logging, perforating, pipe recovery, and mechanical services.Viking Services has a winning combination of extensive wellsite experience, proper planning, high quality equipment, and highly skilled personnel, with safety as our first priority. Our expert engineers employ the appropriate technology using reliable and proven equipment to obtain the results that our clients demand; whether on a routine well or a challenging pressure control operation. Viking Services personnel are known for innovation and creativity in solving downhole problems quickly and without compromising safety.Viking Services built its reputation on providing quality logging services to the oil and gas industry. We acquire our data by using Warrior Well Logging Acquisition Systems, which are recognized throughout the industry for accuracy and reliability in even the most extreme conditions.

Slickline Services

Digital Memory Services• Production Tests• Pressure Gradients• Frac Monitoring• Injection Pressure Monitoring

Services

Logging Services• Dual Receiver Cement Bond Evaluation • Gamma Ray Collar Logging• Compensated Neutron Logging• Temperature Survey Logging

Mechanical Services• Bridge Plugs

Composite Cast Iron

• Frac Plugs Composite Cast Iron

• Cement Retainers Composite Cast Iron

• Retrievable Bridge Plug Setting• Production Packer Setting• Junk Basket

Gauge Ring Systems• Dump Bailers

Cement Sand Acid

Perforating Services• Perforating Gamma Ray Systems• High Shot Density Perforating • Slick Gun Systems• Scalloped Gun Systems• Thru-Tubing Link Systems• Tubing Conveyed Perforating • Coiled Tubing Conveyed Perforating

Pipe Recovery Services• Free Point Surveys• Back-off Shots• Chemical Cutter Systems • Jet Cutter Systems• Split Shot Systems

Production Logging Services• Production Flow Profile• Stimulation Evaluation• Injection Profile• Bottom Hole Data• Leak Detection

Cased Hole Wireline Equipment

Surface Equipment• 1500 PSI Pressure Control Systems• 5000 PSI Pressure Control Systems

Downhole Tools - Production Logging

• Real Time or Memory

◦ Pressure

◦ Temperature

◦ Spinner

◦ Fluid Capacitance

◦ Gamma Ray

◦ CCL

Downhole Tools - Wireline• Scintillation Gamma Ray Logging Tools• Dual Receiver Cement Bond Tools• Compensated Neutron Tools• Rare Earth Magnetic Collar Locators• Tools listed above can be ran in combination • Perforating Gamma Ray Correlation • Tools• Temperature Survey Tools• Free Point Tools• Baker Setting Tools• Support Equipment• Safety Equipment

Downhole Tools - Slickline• Electronic Memory Gauges

◦ Silicone - Sapphire Sensor ◦ Time / Temperature / Pressure ◦ 0-3000 PSI ◦ 0-6000 PSI

Vehicles

• Cased Hole Wireline Trucks equipped to perform an array of Wellbore Logging, Perforating, and Pipe Recovery

• Equipment Trucks which serve as Mobile Gun Loading Stations and Pressure Equipment Mobilization Units

• Portable Mast Trailer which allows Rigless wellbore completion when pressure equipment is not required

Viking Services offers the most modern stimulation fleet in the region, along with proprietary fluid systems designed to enhance production and increase recoverable reserves from the complicated reservoirs located in Turkey.

Treatment fluid designs are critical to the success of all stimulation services. Viking Services offers a range of fluids and frac processes:

• Cross linked fluids to include Borates, Zirconates, Antimony

• Gelled acid systems

• Gelled oil systems

• Hybrid systems (Cross linked and Slickwater)

• Energized fluids and Foam Fracs

Viking Services can also provide real time modeling which allows for job design changes in reaction to unique reservoir characteristics. Viking Services also will environmentally control and dispose of all treatment fluid.

FRACTURING SERVICES

Hydraulic Fracture Equipment

130 BPM Blenders with Accufrac™ Automatic Blender Control System

• 130 BPM, 22,400 lbs. proppant per min.

• Dry add hoppers systems with - 12 in. sand screws

• Liquid chemical injection systems: fully automated

Computerized Data Acquisition & Control Vans

• Real time data acquisition and control center

• Control all equipment and monitor / plot rates and pressures

• Engineering software: Real time job monitoring utilizing FracPro

Fracturing Units with Quintuplex Pump

• 2250 BHP units with 4.5 in. quintuplex pumps

• Working pressures up to 11,500 psi

• Continue to grow capacity to meet customer demands

Chemical Additive System and Hydration Unit

• 200 BBL usable capacity hydration tanks

• Chemical add systems with viscosity and PH control capabilities

Additional Stimulation Equipment

• 4,000 cu. ft. sand kings capable of delivering 20,000 lbs. proppant per min.

• N2 Pump Trucks - capable of pumping 10,000 scfm at 10,000 psi

• Treating iron trailer with 2 in., 3 in. and 10K4 in. treating iron with remote operated boom

• Truck 4 in. 15K discharge manifold

• Both 10K and 5K wellheads

• Real time transmitting capabilities. Will allow you to sit in a office anywhere in the world and view a stimulation treatment

• Portable lab testing capabilities

Acidizing Services

• Gelled Acid Systems

• Chemical Acid Diversion Systems

• Mechanical Acid Diversion Systems (Frac Ball and Rock salt)

• Coiled Tubing Conveyed Acid Treatments

• Nitrogen / Foam Energized Acid Treatments

• Hybrid systems

Viking Services offers a multiple selection of Acid Treatments and Diversion Methods:

In addition to pumping services, Viking Services offers a full line of chemical additives with chemical and mechanical diverters for its acidizing services.

Acidizing Equipment

1200 Hydraulic Horsepower Trailer Mounted Twin Pump Acidizing Unit

• Max Rate 16.5 BPM – Max Pressure 15,000 PSI

• Trailer mounted twin pump units with dual 600 HHP triplex well service pumps for a combined rating of 1,200 HHP

• Triplex pump with 3 in. plungers for a max working pressure of 15,000 PSI

• Triplex pump with 4 in. plungers for a max rate of 10.5 BPM

• Pumps can be operated simultaneously to achieve a maximum discharge rate of 16.5 BPM

Fluid Handling Equipment

• 11 BBL inventory tanks with paddle wheel agitators

• 1 BBL mixing tub with jet system and dedicated centrifugal pump for mixing, rock salt, sand, and chemicals slurries on-the-fly

• High pressure dual discharge manifold is mounted at the rear of the unit to control the discharge flow of either or both pumps

• All of the systems on the twin pump unit are operated and monitored from a climatized control cabin, where job data is displayed and recorded via the units DP600 DataLogger data acquisition system**

Acid Handling Equipment

• Dual compartment 5,000 gallon acid transports.

• Trailer mounted acid transports have a 120BBL capacity with 2,500 gallon compartments

• Fluid handling system includes a Mission 3 in. X 4 in. centrifugal pump and roll lines for mixing and rolling acid and chemical diverter.

• Trailer type mobile 500 BBL Acid frac tanks provide adequate storage for acid, chemicals, and fluids at the well site.

ACIDIZING SERVICES

CEMENTING SERVICES

When Reliability and Precision MattersViking Services’ mixing and pumping systems have been designed and engineered specifically to bring value and dependability to our customers. Our technology stays on the cutting edge and is backed by performance, safety, and service.

CementingOur pressure pumping services consist of cementing services used in the completion of new oil and natural gas wells in addition to remedial work on existing wells. Viking Services’ cementing services consist of blending high-grade cement and water with various solid and liquid additives to create a cement slurry that is pumped into a well between the casing and the wellbore. We contract with central, regional, and district laboratory testing facilities to evaluate cement slurry properties, which can vary by cement supplier and local water sources. The principal application for cementing services used in oilfield operations is primary cementing, or cementing between the casing string and the wellbore during the drilling and completion phase of a well.

Cementing Service Equipment

Twin 450 HP Pump Units

• Truck mounted recirculation twin pump units

◦ Complete with 3.5 inch and 4 inch triplex pumps

◦ Capable of mixing 0 to 22 ppg cement slurry up to a maximum rate of 2.0 m3/min

◦ Capable of pumping up to 10,000 psi @1.0 m3/min

◦ Treating iron package for rig up

◦ Automatic density control mixing system for greater density accuracy

• Trailer mounted recirculation twin pump unit

◦ Complete with 3.5 inch and 4 inch triplex pumps, capable of mixing 0 to 22 ppg cement slurry up to a maximum rate of 2.0 m3/min

◦ Capable of pumping up to 10,000 psi @1.0 m3/min

◦ Treating iron package for rig up, as well as an automatic density control mixing system for greater density accuracy

Batch Mixing Trailers

• Capable of mixing slurry up to 2.5 g/cm3 consisting of two 50 bbl batch tanks,

• Equipped with hydraulic driven paddle agitators

• 6×5 centrifugal pumps for slurry recirculation and transfer

• 4×3 mixing water pump

• Piping and manifold with a low working pressure of 1.6MPa

Additional Cementing Equipment

• 50 bbl batch tank equipped with a hydraulic driven paddle agitator

• Cement Trucks capable of carrying 20 tons each

• Silos having bulk capacity of 40 tons

• Single plug cement heads that include buttress and casing crossover

Viking Services is continually expanding our growing inventory to meet the continued growth of our customers demands.

COMPLETION SERVICES

Viking Services completion rigs offer complete “life of well” services. From periodic maintenance to complete well workovers, Viking can offer the rig to suit your needs and enhance recovery. Viking’s experienced crews can help maintain all downhole tools used to lift oil or natural gas from subsurface reservoirs to surface production and gathering systems. While completions initiate production; workovers, well servicing, and stimulation are vital to the longevity of your producing wells. Viking Services also offers plug and abandonment services to ensure all producing and non-producing formations are properly sealed from the environment and surrounding formations.

Our fleet consists of 8 workover and service rigs, with engine rating up to 650HP and 355,000LB load derricks. In addition, our completion rigs can be bundled with any ancillary equipment options including, pumps, mud tanks, A/C generators, power swivels, BOP’s, frac tanks, nitrogen generation, or any of the other services required to perform your workover, maintenance, or competition program.

WELL TESTING

Well Testing

Production Testing And Flowback

Viking Services’ well testing specializes in surface production testing and flowback services. Viking Services partners with its clients to optimize maximum initial production performance. Flowback and testing services are vital to the overall production of the well and Viking Services’ well testing is dedicated to using the highest quality equipment and the personnel from the beginning. At Viking Services, our well testing has a diverse fleet of equipment along with the knowledge to effectively treat each well as its own specialized and unique project. To support these services, the company has a complete line of testing equipment.

In addition to the equipment and personnel, our well testing services would not be complete without accurate data. All of our technicians are trained to use the latest communication equipment. This provides our clients with immediate access to the data coming from the field, as well as an optional real time data acquisition via our GPRS networks.

Testing Equipment

• Test Separators

• Choke Manifold

• Flow Iron

• Sand Separators

• Flowback Tanks

• Flare Stacks

• Trash Catchers

• Combination Test Units

• Indirect Heaters

COILED TUBING SERVICES

Coiled Tubing and Thru Tubing Services

Viking Services offers coiled tubing and thru tubing within its long list of services. Viking Services has modern coiled tubing and thru tubing equipment to support drilling, completion, and production operations. Coiled tubing and thru tubing services reduce drilling, completion, and remediation work time through rapid mobility, rig up, and continuous tubing injection and retraction. Coiled tubing and thru tubing services are ideal in completion and intervention operations, utilizing a unified string of pipe through a snubbing tractor, combined with high pressure well control equipment. Viking Services’ coiled tubing and thru tubing department have a knowledgeable engineering staff that assist clients with recommendations and simulations to demonstrate the potential of various well applications. Through minimizing operating time and reservoir intrusion, our coiled tubing and thru tubing services improves economics for clients.

Coiled Tubing and Thru Tubing Applications

• Scale and Debris Cleaning

• Coiled Tubing Deployed Fracturing

• Coiled Tubing Deployed Acidizing

• Gravel Packing

• Fluid Jet Lifting

• Open and Cased Hole Drilling and Milling

• Fishing

• Coiled Tubing Conveyed Perforating Guns

• Abrasive Perforating Chemical Cutting

• Coiled Tubing Conveyed Logging (E-Coil)

• Velocity String Installation

• Capillary String InstallationThru Tubing Equipment

• 2.875 in. Bottom Hole Assemblies (incl/ motors, jars, subs, disconnects, check valves, etc.)

• 4.5 in., 5.5 in., 7 in. Bits and Mills

• Fishing Tools for all in-house BHAs, as well as for wireline cable, logging and perforating tools.

• 30 ft. enclosed trailers w/ BHA racks and tool boxes

Coiled Tubing Equipment

• Tractor and Trailer mounted coiled tubing units capable of 1.25 in. to 2.375 in. diameter tubing, with a maximum reel capacity of 7,000m with 2 in. tubing.

• Cerberus-Orion™ simulation and data acquisition system

• 20,000 - 80,000 lb (continuous push/pull) injector heads

• 200 - 2,000 BHP twin pumps

• 20 - 50 ton cranes

• 10,000 - 15,000 psi BOPE, lubricators

Quality Control Equipment

• Dynamo-meter

• Jar Tester

• Break-out/Torque-up machine

RENTAL SERVICESViking Services has built a reputation as a top service provider throughout the industry. We are fully committed to a safe work environment, quality tools, superior services, and zero failures. We take pride in providing what you need when you need it, and if by chance we don’t have the tool in stock we will do our absolute best to locate the tools needed. These commitments will ultimately help our clients reduce downtime and increase profitability.

Drilling & Workover Equipment

• Downhole mud motors from 4 ¾ in. to 8 in.

• Drill collars

• Drill pipe

• Core barrels

• Power swivels

• Triplex service pumps

• BOPs

• Casing running tools and tongs

• 2 3/8 in. and 2 7/8 in. drill pipe with RTS connection

• Stabilizers & Reamers from 6 in. to 17 1/2 in.

• Portable casing jack unit

• Packers and RBP’s

• 3 ½ in. frac string

• Handling tools

• Spools & DSAs

• X-over subs

Fishing & Accessory Tools

• Fishing Jars, AMP’s, bumper subs

• Overshots

• Junk catchers

• Milling equipment

• Experienced Fisherman

GEOPHYSICAL SERVICES

Seismic Services

Viking Geophysical Services brings together the people, tools, and technology that enable innovative solutions for today’s seismic challenges. Viking Services is the first company in the world to employ exclusive wireless technology on all high resolution 2-D and 3-D shoots. We acquire and process 2-D, 3-D, and micro seismic land data for clients, which can range from major oil and gas companies to independent oil and gas operators.

Seismic Experience

• Viking Geophysical has over 200 years of combined operating experience and recognized track record of technological leadership in the science of geophysics.

• Viking Geophysical has successfully acquired over 6,200km2 and 6,400 km of high quality 3D and 2D seismic data in variety complex landscapes from highly populated urban environments to remote mountainous locations.

• Viking has successfully completed operations in over 10 countries raging from the European Union to the Syrian border in Turkey.

• Viking Geophysical continues to take great pride in our custom tailored HSE program, resulting in over 1,950,000 man hours LTI with one of the industries most diversified and skilled work forces.

Seismic Equipment

• 15- AHV-IV Commanders Buggy Vibrators

• 11- AHV-IV PLS 362 Buggy Vibrators

• 5-IVI ATS 60 Birdwagon Buggy Vibrators

• Seismic Source Force III Source controller equipped

• Novatel high precision vib navigation systems

• 15,000 Single Channel OYO GSR Autonomous cable free system

• 6,000 Sercel 408/428 cable based telemetry system

• 20,000 OYO 32ct 10hz Geophones

• 8,000 SM 24 10hz Geophones

• Dynamite capability with Minute Men infill drilling capacity

• Seismic Source BoomBox shooting system

• Full in-house program design and RTK/ Conventional survey capabilities

• Full compliment of Vista and Omni preplanning/QC Processing capability

CIVIL ENGINEERING AND TRANSPORTATION

• Dirt Services

• Transportation Services Supplies & Logistics Services

Dirt Service and Location Construction

Viking Services is a provider of oilfield road and location construction and trucking services. We have top-of-line equipment, coupled with stringent maintenance schedules.

Viking Services has the equipment necessary to provide trucking and dirt services for operators looking for value and experience from their contracting partners within our operating regions. We offer a single source for oilfield construction and transportation needed that includes new, heavy-duty oilfield rigged trucks, trailers, and an impressive fleet of dirt equipment. Viking Services can meet virtually any construction and mobilization need an Operator might encounter. We look forward to exceeding your expectations and are constantly in the process of upgrading our equipment to provide our customers with the best, most efficient operating equipment in the region.

In the process of upgrading to be the best, most efficient service company in the region, Viking Services has acquired Roustabout and Water Vacuum Transports. Our new Roustabout division has the knowledge and ability to service all of the Operators existing well sites and pipelines, as well as any new well hookup, and flow back well testing. Viking Services’ Water Transport division has the ability to haul up to 130bbls of fluid per load. Viking Services is well positioned, which allows for maximum efficiency to ensure the operator will meet their well economic objectives.

Our experienced personnel are knowledgeable regarding proper environmental regulations and our network of contacts allow us to maximize job site efficiency, completing required permitting, and other processes in a quick and efficient manner. Viking Services offers experienced consultation, support, management, and willingness to offer turnkey construction within the oil and natural gas industry.

Viking Services prides itself on responding quickly to your construction and transportation needs by implementing a wide range of well-maintained equipment, trucks and trailers. We take an active interest in achieving your operational and economic objectives. Responsiveness, trust, and reliability are important to the way we do business. Every job benefits from experienced crews and management, resulting in unparalleled performance and consistency that is needed in the oil and natural gas industry. Check back often as we are currently adding to our already extensive fleet.

Services

• General Well site Construction

• Oilfield Transport

• Site Preparation

• Lease preparation

• Right-Of-Way Clearing

• Road Construction

• Rig Mobilization

• Rig Demobilization

• Engineering

• Supervision and Consulting

• Roustabouts (well maintenance)

• Vacuum Trucks

• Water Transports

Transportation Services, Supplies and Logistic Services

Viking Services is a provider of supplies and logistics coordination for the oil and gas industry. We are dedicated to providing the highest quality oilfield products and services, and can be the single source for all of your supply and equipment needs. From a spare part to complete well or rig supplies, Viking Services delivers customer solutions. By developing services to better serve future customer requirements, we will continue to be the premier source for all of your product and service needs.

At Viking Services we inventory a vast mix of products and provide supply chain solutions for producers based on our long term source and shipping experience.

In addition to the above services, we also provide our customers with a variety of specialized services including, on-site temporary fluid storage capacities, the removal and disposal of specialized fluids used during certain completion and workover operations, and the removal and disposal of brine/salt water that often is produced in conjunction with the production of oil and natural gas.

CONTACT USBD@viking-intl.com

Dubai Office

Viking Services DMCC.PO-Box 181525Unit 13H, Almas Tower, Jumeirah LakesTowersDubai, UAE+971 45584506+971 45584507

Budapest Office

Forgách u. 11-131139 Budapest, Hungary+36.1.370.3283 Office+36.1.370.2304 Fax

Diyarbakir Facility

Urfa Yolu 12. KmM-OIL Arkasi, Gozeli | Diyarbakir, Turkey+90.412.255.0523 Office+90.412.255.0529 Fax

Ankara Office

Sehit Ersan Cad. No24/7 CankayaAnkara, Turkey+90.312.666.3250 Office+90.312.466.2142 Fax

Tekirdag Office

Hayrabolu Yolu Uzeri 8.Km59100 Merkez | Tekirdag, Turkey+90.282.258.2100 Office+90.282.258.2141 Fax

Aydin Facility

Aydin Denizli Yolu Uzeri UmurluBeldesi Aydin Organize SanayiBölgesi AOSB 282. Ada 3. Parsel+90.256.218.0340 Office