Viking Integrated Safety

Solutions & Products Catalog — 2021

Pre-Engineered Solutions from Viking Integrated Safety

Designed to save you time and money — without sacrificing reliability

2

Pre-engineered project delivery is tailored to meet your specific needs with consistency across all projects. Unlike a traditional ap-proach, your project will include streamline sourcing and delivery with rapid deployment, budgeting efficiency, cost savings, and reduced risk.

FinishStart UpStart Procurement Permits Fabrication

Fabrication Start Up FinishPermitsFinal DesignProcurementEngineeringStart

Concept Design Bids Shop Drawings Approvals Installation Testing Commissioning

Testing CommissioningInstallationApprovalsKit Sourcing

Finish

Cost Determination

33% Less Time*40% Cost Savings*

Pre-Engineered Approach

Traditional Approach

VIS Pre-Engineered vs. Traditional:

Our approach has a single point of contact, discounts off list prices, extended warranty, cost controls, needs assessment, project consultation & management, design review, installation and start-up review, commis-sioning review, final acceptance assessment, records archiving, staff training, service & maintenance support, & global reach.

Benefits:• Cost savings & rapid deployment• Tailoring to meet specific needs• Consistency across all projects• Streamlined sourcing and delivery• Budgeting efficiency• Reduced risk

Modular & Edge Data Centers

Modular & edge data centers are fully enclosed, self-contained compartments, which house IT/communication equipment that provides real-time autonomous processing of critical data for a wide array of industries. The configuration may be in the form of a small, unoccupied equipment enclosure, or a much larger, pre-fab-ricated, occupiable structure having one or more entry/exit doors.

Viking Integrated Safety works with you to develop an effective solution that reliably detects potential events while in the incipient stages of fire development and notifies personnel while initiating automated processes. Using agents safe for the environment and equipment present, the system rapidly extinguishes at the right moment and prevents reignition and spread.

* Average savings

Designed to save you time and money — without sacrificing reliability

Commercial and Military Aircraft Hangars

Protecting hangars and the expensive aircraft and equipment housed inside from fire requires early and efficient smoke, flame, and heat detection, as well as thorough and effective suppression systems. It is essential that the threat be accurately identified so that false alarms do not trigger unwanted suppression events. Our solution employs a combination of IR and video flame detectors integrated with an agent releasing control panel that can activate deluge foam and/or sprinkler suppression systems.

Hyperscale Data Centers

Hyperscale data centers are comprised of many inter-dependent adjacencies, each contributing to the operational continuity of the facility. An event in any part of the facility can affect uptime objectives. A good design considers a holistic approach applying protection elements appropriate to the hazard. Our solutions include integrated technologies for the protection of white space, CRAH galleries, mechanical spaces & chiller plants, electrical rooms, UPS spaces, generator enclosures, modular structures, administra-tive spaces, and even corridors.

If a power outage occurs, diesel generators start upautomatically, within seconds. While the generators gothrough a start-up phase, UPS systems deliver power so thatoperations can continue. Fires caused by generator and fuelsupply installations are typically fast, flaming fires, and heat orflame detection are the first considerations. The selection of anextinguishing system for a generator room enclosure dependson factors such as ventilation and cooling, fuel type, fuelstorage and the delivery system. Proven extinguishing optionsinclude fire sprinklers, AFFF foam sprinklers, and clean agent systems.

Emergency Power Supplies

Pre-Engineered Fire Protection Solutions

3

Viking VSF Intelligent Video Flame Detectors

For hazardous industries where fast optical flame detection is critical

Flame Sensitivity VSF300 VSF301

Fuel Type Fire Size Distance Distance

n-Heptane Pan Fire 1’ x 1’ Pan 200 feet (60m) 144 feet (44m)

n-Heptane: Direct Sunlight 1’ x 1’ Pan 200 feet (60m) 144 feet (44m)

n-Heptane: Modulated Sunlight 1’ x 1’ Pan 200 feet (60m) 144 feet (44m)

n-Heptane: Modulated Black Body 1’ x 1’ Pan 200 feet (60m) 144 feet (44m)

n-Heptane: Arc Welding 1’ x 1’ Pan 200 feet (60m) 144 feet (44m)

n-Heptane: 1000 W Lamp 1’ x 1’ Pan 200 feet (60m) 144 feet (44m)

Ethanol 1’ x 1’ Pan 100 feet (30m) 85 feet (25m)

Methane Jet Fire 36” Plume 86 feet (26m) 100 feet (30m)

Gasoline 1’ x 1’ Pan 200 feet (60m) 144 feet (44m)

JP4 2’ x 2’ Pan 300 feet (90 m) 200 feet (61m)

Tri-ethylene glycol 1’ x 1’ Pan 50 feet (15m) 32 feet (10m)

Diesel 1’ x 1’ Pan 165 feet (50m) 130 feet (40m)

Crude Oil (Heavy Fuel) 20” x 20” Pan 165 feet (50m) 130 feet (40m)

Silane 24” Plume 56 feet (17m) 42 feet (13m)

Common Features:• Continuous optical test, without a reflector,

verifies operation and improves device up-time

• Microprocessor controlled heated-optics maintains operation in harsh weather condi-tions (snow, ice, condensation)

• International hazardous area approvals: FM / ATEX / IEC Ex

• Certified performance testing to multiple fuels• Spatially aware—single sensitivity detection• External testing with a long-range flame simu-

lator minimizes the need for scaffolding• Easy integration using industry-standard out-

puts: Alarm and Fault Relays (0–20mA), HART® (standard)

• Certified SIL 2 capable• Worldwide marine approvals• Cu-free Al or 316 stainless steel housing• Entry size: ¾ inch NPT or M25• < 7 second typical response

Unique Features:• VSF300 FoV — 80° Vertical x 120° Horizontal• VSF301 FoV — 90° Vertical x 65° Horizontal• VSF301 includes live color video feed and

Micro-SD memory card slot for recording

Flame Sensitivity VSF303

Fuel Type Fire Size Distance Sensitivity

n-Heptane 1’ x 1’ 196 feet (60m) High

n-Heptane + Arc Welding 1’ x 1’ 196 feet (60m) High

Gasoline 1’x1’ 196 feet (60m) High

Diesel 1’x1’ 164 feet (50m) High

Crude Oil (Heavy Fuel) 20” x 20” 164 feet (50m) High

JP4 1’ x 1’ 196 feet (60m) High

Methane 24” Plume 164 feet (50m) High

Ethanol 1’ x 1’ 137 feet (42m) High

Methanol 1’ x 1’ 137 feet (42m) High

n-Heptane 1’ x 1’ 98 feet (30m) Standard

Gasoline 1’ x 1’ 98 feet (30m) Standard

JP4 1’ x 1’ 98 feet (30m) Standard

Methane 24” Plume 98 feet (30m) Standard

Features:• Multi-spectrum IR design delivers long

detection distances and enhanced false alarm immunity

• Continuous optical test, without a reflector• Microprocessor controlled heated-optics

maintains operation in harsh weather condi-tions (snow, ice, condensation)

• International hazardous area approvals: FM / ATEX / IEC Ex / INMETRO / PESO

• Certified performance testing to multiple fuels• Adjustable sensitivity• External testing with a long-range flame

simulator• Easy integration using industry-standard out-

puts: Alarm & Fault Relays (0–20mA), HART® 7 (standard)

• Certified SIL 2 capable• 5 year warranty• Cu-free Al or 316 stainless steel housing• Entry size: ¾ inch NPT or M25• < 5 second typical response• FoV — 90° Vertical x 90° Horizontal

VSF300 & VSF301 Video Flame Detectors

VSF303 Multi-Spectrun IR Flame Detector

4

5

Detector Type Description Standard

Class I Div 2 ABCDClass II Div 2 EFGClass III Div 2 EFGATEX Zone 2/22

Class I Div 1 ABCDEFGClass II Div 1 ABCDEFG

Class III Div 1/ ABCDEFGATEX Zone 2/22, Zone 1/21, Zone 20

Flame UV (Ultraviolet)Detector

FMX5000 UV FMX5000 UV 3GD

Flame3-Channel IR(Infrared) Detector

FMX5000 IR FMX5000 IR 3GD FMX5000 IR Ex

Flame

3-Channel IR(Infrared)Detector Control Unit

Note: Up to 3 sensors each

YMX5000 YMX5000 3GDHazardous Area Class II

2G Ex db IIC T4 Gb

YMX5000 ExHazardous Area Class II

2G Ex db IIC T4 Gb

Sensor Unit

YMX5000 FMX YMX5000 FMX 3GD YMX5000 FMX Ex

Heat

Standard Detector

Note: Single hole mounting available

WMX5000 WMX5000 3GD WMX5000 Ex

Heat

High-TemperatureDetector

Note: Flexible sensor rod available for FS Ex

WMX5000 FS WMX5000 FS 3GD WMX5000 FS Ex

Minimax® UniVario™ Flame and Heat Detectors

A Universal detection platform with Various capabilities

UniVario Flame & Heat Detectors

Xtralis® VESDA® Aspirating Smoke Detectors

Features VESDA-E VEU VESDA-E VEP VESDA-E VEP VESDA-E VES VESDA-E VEA VESDA Laser Focus

Pipes and Area Coverage

Pipe Length (Linear) 400 m (1,312 ft) 100 m (328 ft) 280 m (919 ft) 280 m (919 ft) 40 x 100 m (40 x 328 ft)

25 / 50 m (82 / 164 ft)

Pipe Length (Branched) 800 m (2,624 ft) 130 m (427 ft) 560 m (1,837 ft) 560 m (1,837 ft) N/A 30 / 60 m (98 / 197 ft)

Area Coverage 6,500 m2* (69,965 sq.ft)

1,000 m2

(10,760 sq. ft)2,000 m2

(21,520 sq. ft)2,000 m2

(21,520 sq. ft)2,000 m2

(21,520 sq. ft) across 40 holes

250 / 500 m2

(2,690 / 5,380 sq. ft)

No. of Pipe Inlets 4 1 4 4 40 1

Multiple PipeAddressability No No Up to 4 Up to 40 No

Sensitivity

Minimum Fire 1 Threshold

0.001% obs/m (0.0003% obs/ft)

0.01% obs/m(0.0031% obs/ft)

0.01% obs/m (0.0031% obs/ft)

1.6% obs/m (0.5% obs/ft)

0.025% obs/m (0.008% obs/ft)

Detection Range 0.001–20.0% obs/m (0.0003–6.25% obs/ft)

0.005–20% obs/m (0.0016–6.25% obs/ft)

0.005–20% obs/m (0.0016–6.25% obs/ft)

0.020–16% obs/m (0.006–4.88 obs/ft)

0.025–20% obs/m (0.008–6.25 obs/ft)

EN54-20 (Class A / B / C)

Max. # of Holes (Class A / B / C) 80 / 80 / 100 30 / 40 / 45 40 / 80 / 100 40 / 80 / 100*** 40–40** VLF 250: 12 / 12 / 12

VLF 500: 30 / 30 / 30

Sampling Point Sensitivity (%obs/m) 1.5 / 3 / 8 1.5 / 3 / 8 1.5 / 3 / 8*** 1.6 / 4 / 8 1.5 / 4.5 / 10

Transport Time (seconds) 70 / 90 / 110 60 / 90 / 110 60 / 90 / 90*** 40–90 (Tube length

dependent)VLF 250: 0 / 60 / 60

VLF 500: 90 / 90 / 90

Hazardous Area Approval No FM Class 1, Div 2, Groups A, B, C, D No N/A FM Class 1, Div 2,

Groups A, B, C, D

IP Rating IP40 IP40 IP40 IP40 IP30

Two Stage Filtration Yes Yes Yes Yes Yes

Alarm Thresholds 8 (Day/Night) 8 (Day/Night) 32 (Day/Night) 8 (Day/Night) 8 (Day/Night)

Relay Outputs 7 7 12 7 (Expandable to 47) 3 (Expandable to 6)

On-board Memory (Max. Events) 20,000 20,000 20,000 20,000 18,000

* System design and regulatory requirements may restrict the monitoring area to a lesser amount ** Check local codes for the required transport times determined by the tube lengths *** Subject to Agency testing

Very early warning smoke detection allows action before threats escalate

VESDA Aspirating Smoke Detectors

6

Gas and Spot Smoke Detectors

VESDA Sensepoint XCL Gas Detectors

• VESDA Sensepoint XCL Micro Bore gas detector provides early warning of the presence of gases for occupant protection and system monitoring whilst at the same time ensuring protection against fire threats. This detector is designed specifically for use with the VESDA-E VEA ASD.

• VESDA Sensepoint XCL Large Bore utilizes a ASD pipe network to deliver su-perior gas detection via multiple hole (multi-point) sampling. This detector is for use with VESDA-E VEP, VES, VEU or VESDA VLF-250 ASDs.

Large Bore Micro Bore

Gas Detected : Level

Carbon Monoxide (CO) ppm Carbon Monoxide (CO) 0–1000 ppm

Flammable Gases % LEL Combustible (CAT) 0–100% LEL

Hydrogen (H2) ppm Hydrogen (H2) 0–1000 ppm

Hydrogen Sulphide (H2S) ppm Carbon Dioxide (CO2) 0–5.0% v/v

Carbon Dioxide (CO2) % v/v, ppm Carbon Dioxide (CO2) 0–5000 ppm

Nitrogen Dioxide (NO2) ppm

Ammonia (NH3) ppm

Oxygen (O2) % v/v

Compatible Aspirating Smoke Detector Pipe Networks

VESDA-E VEP / VES / VEU + VESDA VLP VESDA-E VEA

Li-ion Tamer Rack Monitoring System

This system monitors lithium-ion battery off-gas events. It is designed to be plug-and-play, easily to install, and consists of two primary components: (1) off-gas sensors; and a (2) controller.

• The sensors have advanced detection algorithms making them acutely sensitive to lithium-ion battery off-gassing, do not require calibration, are compatible with all forms of lithium-ion battery form factors & chemistries, and have a lifetime comparable to a typical lithium-ion battery system.

• The controller that contains proprietary logic to diagnose when and where battery off-gas events have occurred. It has outputs that can be used to electrically isolate the battery system and activate the ventilation system.

Gas Detection Specifications

Target Gases Lithium ion battery off- gassing compounds

Min. Detection Threshold < 1 ppm/sec

Response Time 5 seconds

Fault Detection Single cell failure

Other Features

Max Sensors per Controller 15

System Outputs Digital outputs/MODBUS

Connector Type 2x 10-pin Molex

i3™ Series Photoelectric Smoke Detector• Plug-in detector line, mounting base included• Large wire entry port• In-line terminals with SEMS screws• Mounts to octagonal and single-gang back boxes, 4-square back boxes, or

direct to ceiling • Stop-Drop ’N Lock attachment to base• Removable detector cover and chamber• Built-in remote maintenance signaling• Drift compensation and smoothing algorithms• Simplified sensitivity measurement• Wide-angle, dual-color LED indication• Loop testing via EZ Walk feature• Built-in test switch

7

OneU® Active Extinguishing System

Comprehensive asset fire protection that fits inside a 19” server rack

OneU® Active Extinguishing System

OneU, OneU DD, and OneU ED models provide flexibility and expandability. The OneU DD smoke aspirating system has the same features as the OneU active extin-guishing system without the 3M™ Novec™ 1230 agent container. OneU DD can take air samples for smoke analysis from up to five cabinets, and can activate up to four OneU ED systems or any external extinguishing system. OneU ED extinguishing systems include a seven pound 3M™ Novec™ 1230 agent container, activated to discharge either by a OneU active extinguishing system or the OneU DD smoke aspirating system. Various combinations are available to protect up to five combined cabinets.

Feature OneU Active Extinguishing System

OneU DD Smoke Aspirating System

OneU ED Extinguishing System

Height Fitting Dimension 1U (1.75“)

Smoke Aspirating System

3M™ Novec™ 1230 Agent Container

Power Supply & Battery Backup

Monitored Output Visual and Audible Alarm

Dry Contacts for Power Down Circuits

Display & Control Panel

Ethernet Network

Audio/Visual and Input/Output Products

Viking Integrated Safety offers a wide selection of Audio/Visual and Input/Output products from a variety of best-in-class manufacturers and OEMs. Below is a repre-sentative sample of AV & I/O products employed by our pre-engineered solutions.

Solenoid Monitoring Switch (SMS)

The SMS consists of a supervisory switch, flexible connector, & a junction box designed for the VSH200 or VSH1230 suppression systems.

For VSH1230 & VHS200 systems, where a mechanical manual system acti-vation is possible.

Pneumatic Discharge Pressure Switch

Releasing Circuit Disable Switch Surface Mount Abort Switch

The device consists of a stainless steel faceplate, green LED, amber LED, and a switch assembly.

Switch is to be wired to the abort termi-nals of the releasing panels. It is designed to mount on a stan-dard double gang electrical enclosure.

SpectrAlert Advance Horn & Strobe

The SpectrAlert Advance series is the most versatile and easy-to-use line of horn strobes in the industry.

The S/HS-WP Series outdoor signals are 24VDC strobes and horn/strobes equipped with a fixed 75 candela strobe.

Outdoor Strobe Devices

Agent Release / Suppression Pull and Abort Station

This Potter switch is designed to be used with any releasing system. This device is designed for indoor use only.

8

Agent Releasing Control Panels

Viking VFR400 Multi-Hazard Release Control Panel

The Viking VFR400 is a microprocessor based multi-hazard releasing control panel for use on preaction, deluge, Surefire® and Firecycle® multi-cycle sprin-kler systems, MX-1230 Fire Extinguishing System, and MX-200 Fire Extinguish-ing System. The Model VFR400 is UL listed, and complies with UL Standard 864, Ninth Edition, for Local Control Units for Releasing Service. It is designed to be compatible and installed in accordance with the requirements of NFPA 13, NFPA 15, NFPA 16, NFPA 72, and NFPA 2001.

The VFR400 is housed in a steel cabinet with removable door and key lock. Standard is red with black and white trim. The panel is available for use with either 120 VAC or 220 VAC for primary power. The cabinet will house up to two (2) 12AH standby batteries, which are capable of powering the unit in excess of 90 hours in the event of an AC power failure. For (2) 18AH batteries, a separate battery box must be used. The VFR400 panel can be used with a wide range of compatible initiating devices, such as spot heat detectors, aspirating smoke detectors, video flame detectors, and linear heat detectors (10,000 ft. — SAFE® Fire) or (3,500 ft. — Protectowire®).

Notifier® RP-2002 Agent Release Control Panel

The RP-2002 is a six-zone FACP for single and dual hazard agent releasing appli-cations. The RP-2002 provides reliable fire detection, signaling and protection for commercial, industrial and institutional buildings requiring agent-based re-leasing. The RP-2002 is compatible with System Sensor’s i3 detectors which are conventional smoke detectors that can transmit a maintenance trouble signal to the FACP indicating the need for cleaning and a supervisory ‘freeze’ signal when the ambient temperature falls below the detector rating of approximate-ly 45°F (7.22°C). In addition, the control panel is compatible with conventional input devices such as two-wire smoke detectors, four-wire smoke detectors, pull stations, water flow devices, tamper switches and other normally-open contact devices.

Four outputs are programmable as NACs (Notification Appliance Circuits) or releasing circuits. Three programmable Form-C relays (factory programmed for Alarm, Trouble and Supervisory) and 24 VDC special application resettable andnon-resettable power outputs are also included on the main circuit board. The RP-2002 supervises all wiring, AC voltage, battery charger and battery level.

Activation of a compatible smoke detector or any normally open fire alarm initiating device will activate audible and visual signaling devices, illuminate an indicator, display alarm information on the panel’s LCD, activate the piezoelec-tric sounder at the FACP, activate the FACP alarm relay and operate an optional module used to notify a remote station or initiate an auxiliary control function.

The RP-2002E offers the same features as the RP-2002 but allows connection to 220/240 VAC. Unless otherwise specified, the information in this data sheet applies to both the 110/ 120 VAC and 220/240 VAC versions of the panels.

9

Suppression Systems

Reliable solutions that closely integrate with Viking detection products

3M™ Novec™ 1230 Fire Protection Fluid

Chemical formula CF3CF2C(O)CF(CF3)2

Chemical name dodecafluoro-2-methlypentan-3-one

ISO designation FK-5-1-12

Specific Weight 68° F (20° C) 3.04 lbs/gal (1.41 kg/l)

State of Aggregation Liquid at 77°F/4.69 psi (at 25°C/1.013 bar)

Boiling Point 120.5°F at 14.69 psi (at 49.2°C/ 1.013 bar)

Environmental Properties— No ozone depletion potential (ODP 0) — Low global warming potential (GWP 1) — Atmospheric lifetime of 5 days

HFC-227ea*

Chemical Formula CF3-CHF-CF3

Chemical Name Heptafluoropropane

ISO Designation HFC-227ea

Specific Weight 68° F (20° C) 3.04 lbs/gal (1.41 kg/l)

State of Aggregation Gaseous at 68º F/14.69 psi (at 20° C/1.013 bar)

Boiling Point 2.3º F at 14.69 psi (–16.5º C at 1.013 bar)

VSH1230 Fire Extinguishing System with 3M™ Novec™ 1230 Fire Protection Fluid• Environmentally safe, with zero ozone layer impact• World-wide recognized and approved extinguishing agent• 3M™ Novec™ 1230 is protected by the 3M™ “Blue Sky Warranty”• Systems optimized with professional VSH1230 calculation software• No extinguishing agent residues, neither corrosive nor electrically conductive• Rapid extinguishing, exceedingly safe for occupied areas• Optimal replacement for environmentally damaging Halon systems• Robust design with low installation and maintenance costs• Compact and space saving• UL/FM approved system• Higher operating pressures of 725 psi provide:

— Greater fill ratios— Longer pipe lengths— Smaller pipe diameters— Multi-zone systems

• Design flexibility for any Special Hazard Environment— Available cylinder sizes/nominal fill: 60, 140, 220, 280, 390, 500 lbs— Pressures available: 360, 725 psi— Single- or multi-cylinder systems— Single- or multi-zone systems

VSH200 Extinguishing Agent SystemThe VSH200 Fire Extinguishing System uses HFC-227ea extinguishing agent that is stored in the system’s extinguishing agent container(s) until system activation. The container assembly includes a welded or seamless steel cylinder filled with HFC-227ea fluid, assembled with the following components:• Cylinder valve with burst disc, pressure gauge, protective neck ring, protec-

tive cylinder cap and valve cap• Cylinder sizes for 360 psi (25 bar): 55, 130, 270, 370, and 450 lbs. (22, 52, 106,

147, and 180 l)• Three cylinder sizes are available for 725 psi (50 bar): 200, 350, and 450 lbs

(80, 140, and 180 l)• Cylinders are designed, manufactured, & labeled in accordance with the US

DOT Standard DOT 4BW-500, DOT 3AA-910, and TC (Transportation Canada - 360 psi (25 bar) systems only)

• To create the pressure necessary for the agent to be released, the extinguish-ing agent container is super pressurized with nitrogen at a pressure of 360 psi (25 bar) or 725 psi (50 bar)

• Cylinder fill density is dependent on the area of protection size. Agent con-centration varies due to the expected class of fire (A, B, or C)

• Each cylinder is equipped with a special pressure differential valve:• Operates according to the differential pressure principle and has a piston

and a brass housing• Includes a burst disc to protect from excessive pressure• Includes a pressure gauge for indication of the filling pressure• The valve is appropriate for high discharge rates and makes the extinguish-

ing discharge possible within 10 seconds• Available in the nominal sizes 1-1/2 inch for the 55 and 130 lb cylinders, and

2 inch for 200, 270, 350, 370, and 450 lb. cylinders• Status of the pressure switch can be monitored by the fire agent release

control panel

10

Integrated Suppression Systems

TOTALPAC 3 System Types

PreAction • Non-interlocked with pneumatic or electric release• Single interlocked with pneumatic or electric release• Double interlocked with pneumatic-pneumatic, elec-

tric-electric or electric-pneumatic release

SureFire® Failsafe single or double interlocked preaction

Multicycle • FireCycle® III single or double interlocked preaction• FireCycle® III Deluge• FireCycle® III Wet

Deluge With hydraulic, pneumatic or electric release

Wet Pipe Available with retard chamber or excess pressure pump

Dry Pipe Available in standard 175 psi or HP 250 psi

FireFlex® VACTEC® Dry & Preaction Vacuum Sprinkler System

A complete FM-approved integrated system that offers unique features and benefits such as corrosion mitigation measures and the elimination of water columns and ice plugs. Fully assembled, factory tested, and ready to be connected to the water supply and piping network, the system includes all control valves, a vacuum pump, release control panel and the unique FireFlex® FLX-PC patented Vacuum Pressure Controller which constitutes the heart of the system.• Factory assembled, programmed, and tested under ISO-9001 standards• Uses the Viking Model F-1 Straight Through Deluge valve• Comes standard pre-wired to the Viking VFR-400 releasing control panel• Compact, aesthetic, and easy to move• Neoprene gasket on all doors to eliminate vibrations• No open-drain cup inside the unit• Separate unlocked access hatch to emergency manual release• Inhibits corrosion by removing oxygen and moisture• Inhibiting atmosphere quickly created as you start the system• Automatically removes residual water preventing ice plug formations• Roughness factor of C=120 on dry systems using black pipe possible• Ensures quick actuation time through FLX-PC Controller• Real-time Vacuum Pressure monitoring• Free calculation software to estimate filling time• Sprinkler system reliability and performance maintained throughout the

system lifetime• Use of black steel pipe in dry-pipe systems permitted by FM when using

vacuum systems• Easy on-site reconfiguration & Low maintenance cost

TOTALPAC®3 Integrated Fire Protection System

Combined automatic sprinkler and clean agent integrated fire suppression systems ideal for protecting water sensitive hazards such as IT or telecom equipment. A dual agent system provides the highest level of protection for mission critical facilities. Simple and quick installation that reduces costs with compact factory assembled and tested systems.

• cULus Listed & FM Approved as an assembled unit• Modular Viking conventional trim rated at 250 psi• Galvanized trim piping• Factory assembled, programmed and tested under ISO-9001 standards• Corrosion resistant cabinet with flush type handle and lock• All internal components are fully accessible from the front of the cabinet• No open drain cup inside the unit• Self-contained unit pre-wired to the Viking VFR-400• Fail-safe preaction type with a Surefire® trim• Multicycle units using Firecycle® III technology• 4 styles of modular air supply options• Inlet & outlet hydrostatic test ports• Compact cabinet design / small footprint• Uses Viking model F-1 straight through deluge valve• Available up to 8” systems• Larger compressor available up to 8” systems (up to 2 HP)• Removable knockouts provided for electrical conduit connections (no drill-

ing required in cabinet)

11

12

Buying VIS Solutions

All VIS solutions are sold through Viking SupplyNet. Established in 1988, Viking SupplyNet distributes the largest selection of integrated detection, alarm, and suppression systems to cus-tomers in over 70 countries. Viking SupplyNet’s state-of-the-art inventory system links all locations worldwide to ensure that every solution is available for timely delivery – to any job site, anywhere in the world.

Viking SupplyNet locations: www.VikingGroupInc.com/locations

Global Engineering Support Services Center (GESSC) The GESS provides support and resources to help with the design, installation, and maintenance of fire protection systems from beginning to end. We work with various engineering design tools including CAD, 3D modeling software, and our own calculation software to create design packages that meet code-compliance, budget, application, and bandwidth requirements. Our team provides timely, accurate, and complete solutions for your project needs.

GESSC assists consultants, architects, engineers, contractors, and building owners with system design. Working with our local partners, we provide training processes, and support installation, commission, service, and maintenance operations. With GESSC, you’re sure to find that pre-planning and good design achieve successful and efficient project delivery.

We offer extensive, hands-on experience with a focus on life cycle optimization, simplified facility operation, maintenance, and efficiency. Our focus on multi-trade coordination, improved accuracy, clear documentation, reduced waste, and early decision-making sets our services apart. Additionally, we are able to support projects in multiple languages and regions. Choose from supported product lines or custom-order desired products to fit your needs.

Contact Us

Viking Integrated SafetyViking Group, Inc.5150 Beltway Dr. SECaledonia, Michigan 49316

• Toll Free Phone: (800) 968-9501• Local Phone: (269) 945-9501• Local Fax: (269) 945-9599 (General Inquiries)• Customer Service Fax: (269) 945-5090• Web: Safety.SupplyNet.com• E-mail: VIS@VikingCorp.com

Design Services & Contact information