Videophone(RAN15.0 01)
-
Upload
david-flores-rodriguez -
Category
Documents
-
view
23 -
download
0
Transcript of Videophone(RAN15.0 01)
-
WCDMA RAN
Videophone Feature ParameterDescription
Issue 01Date 2013-04-28
HUAWEI TECHNOLOGIES CO., LTD.
-
Copyright Huawei Technologies Co., Ltd. 2013. All rights reserved.No part of this document may be reproduced or transmitted in any form or by any means without prior writtenconsent of Huawei Technologies Co., Ltd. Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.All other trademarks and trade names mentioned in this document are the property of their respective holders. NoticeThe purchased products, services and features are stipulated by the contract made between Huawei and thecustomer. All or part of the products, services and features described in this document may not be within thepurchase scope or the usage scope. Unless otherwise specified in the contract, all statements, information,and recommendations in this document are provided "AS IS" without warranties, guarantees or representationsof any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in thepreparation of this document to ensure accuracy of the contents, but all statements, information, andrecommendations in this document do not constitute a warranty of any kind, express or implied. Huawei Technologies Co., Ltd.Address: Huawei Industrial Base
Bantian, LonggangShenzhen 518129People's Republic of China
Website: http://www.huawei.comEmail: [email protected]
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
i
-
Contents
1 About This Document..................................................................................................................11.1 Scope..............................................................................................................................................................................11.2 Intended Audience..........................................................................................................................................................11.3 Change History...............................................................................................................................................................12 Overview.........................................................................................................................................33 Technical Description...................................................................................................................43.1 Radio Bearer Scheme.....................................................................................................................................................43.2 Videophone Fallback to AMR........................................................................................................................................43.3 VP Service Restriction....................................................................................................................................................43.4 Link Stability Control of Videophone............................................................................................................................53.4.1 Overview.....................................................................................................................................................................53.4.2 UL Stability Control....................................................................................................................................................53.4.3 DL Stability Control....................................................................................................................................................64 Related Features.............................................................................................................................75 Network Impact.............................................................................................................................86 Engineering Guidelines...............................................................................................................96.1 When to Use HSUPA Introduction Package................................................................................................................106.2 Information to Be Collected.........................................................................................................................................106.3 Deployment..................................................................................................................................................................106.3.1 Requirements.............................................................................................................................................................106.3.2 Data Preparation........................................................................................................................................................106.3.3 Activation..................................................................................................................................................................116.3.4 Activation Observation..............................................................................................................................................126.3.5 Deactivation...............................................................................................................................................................126.4 Performance Monitoring...............................................................................................................................................146.5 Parameter Optimization................................................................................................................................................146.6 Troubleshooting............................................................................................................................................................147 Parameters.....................................................................................................................................158 Counters........................................................................................................................................33
WCDMA RANVideophone Feature Parameter Description Contents
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
ii
-
9 Glossary.........................................................................................................................................3610 Reference Documents...............................................................................................................37
WCDMA RANVideophone Feature Parameter Description Contents
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
iii
-
1 About This Document1.1 Scope
This document describes WRFD-020130 Videophone Service Restriction, including itstechnical principles, related features, network impact, and engineering guidelines.
1.2 Intended AudienceThis document is intended for personnel who:l Need to understand the features described hereinl Work with Huawei products
1.3 Change HistoryThis section provides information about the changes in different document versions. There aretwo types of changes, which are defined as follows:l Feature change
Changes in features of a specific product versionl Editorial change
Changes in wording or addition of information that was not described in the earlier version
01 (2013-04-28)Compared with Issue 01 (2012-07-20) of RAN14.0, 01 (2013-04-28) of RAN15.0 includes thefollowing changes.
Change Type Change Description ParameterChange
Feature change None None
WCDMA RANVideophone Feature Parameter Description 1 About This Document
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
1
-
Change Type Change Description ParameterChange
Editorial change l Added related features and networkimpact for the Videophone ServiceRestriction feature. For details, seechapter 4 Related Features and chapter5 Network Impact.
l Optimized the feature configuration usingthe CME. For details, see chapter 6Engineering Guidelines.
None
WCDMA RANVideophone Feature Parameter Description 1 About This Document
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
2
-
2 OverviewThe videophone service is the universal mobile telecommunications system (UMTS) circuit-switched (CS) domain multimedia service defined in the 3GPP protocol. This service supportsintegration of voice, data, and video. The transmission rate of this service is up to 64 kbit/s.Videophone service complies with 3G-H.324M protocol. 3G-H.324M is based on ITU-T H.324recommendation and 3GPP modified it for purposes of 3GPP circuit switched network basedvideo telephony.For details of 3G-H.324M, see 3GPP TS 26.110 and 3GPP TS 26.111.This document presents the following information of videophone service:l Radio Bearer Schemel Videophone Fallback to AMRl Videophone Service Restrictionl Link Stability Control of videophone
WCDMA RANVideophone Feature Parameter Description 2 Overview
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
3
-
3 Technical Description3.1 Radio Bearer Scheme
RAB 5# is used for videophone service. Videophone service is carried on DCH only.
Index CN Domain Traffic Class SourceStatisticsDescriptor
MBR (kbit/s) Direction
5 CS Conversational
Unknown 64 DL/UL
3.2 Videophone Fallback to AMRDuring handover from 3G to 2G, videophone may fall back to AMR. For details, see HandoverFeature Parameter Description.
3.3 VP Service RestrictionThis section describes the feature WRFD-020130 Videophone Service Restriction.In restricted areas such as military management areas and key laboratories, the use of videophoneservice may lead to leakage of information. To meet the security requirements in these areas,the RNC supports the prohibition of videophone services at the cell level. Throughconfigurations on the Local Maintenance Terminal (LMT), the videophone services of all UEsin a cell can be prohibited.Videophone service is barred in the cell by turning on the switch VPLimitInd(BSC6900,BSC6910).The implementation of this feature involves the following aspects:
WCDMA RANVideophone Feature Parameter Description 3 Technical Description
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
4
-
l The RNC prohibits videophone service setup including originated call and terminated callin the cell with videophone restriction during service establishment
l The RNC releases videophone services when the UE is handed over to the cell withvideophone restriction
l The RNC releases only videophone service in combined services and retaining otherservices
The processing of inter-RNC handover is the same as that of intra-RNC handover but the RNCneeds to consider the capability of videophone in the cell in the neighboring RNC. TheVPLimitInd(BSC6900,BSC6910) parameter in ADD/MOD UEXT3GCELL indicates whetherthe videophone service is limited in a neighboring RNC cell.
3.4 Link Stability Control of Videophone
3.4.1 OverviewWhen the UL TX power of the UE or the DL TCP of the NodeB exceeds the associated threshold,the link stability control function for videophone services triggers an inter-frequency handover,to guarantee the stability of links.The measurement is the same as that of AMR service except that some parameters are introducedfor videophone services. For details of measurement, see AMR Feature ParameterDescription.When link stability problem is detected, handover is performed. For details about handovers,see the Handover Feature Parameter Description.The following table shows the basic principle of link stability control of videophone.
Table 3-1 link stability control of videophoneDirection Event HandoverDCH DL Ea Start measurement for handover
Eb Stop measurement for handoverDCH UL 6D or 6A1 Start measurement for handover
6B1 Stop measurement for handover
3.4.2 UL Stability ControlMeasurement
The UL stability control function for videophone services involves events 6A1, 6B1, and 6D.6A1 and 6D start measurement for handover. 6B1 stops the measurement for handover.
WCDMA RANVideophone Feature Parameter Description 3 Technical Description
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
5
-
The time to trigger event 6A1, 6B1, or 6D is specified by the parameter UlVpTrigTime6A1(BSC6900,BSC6910), UlVpTrigTime6B1(BSC6900,BSC6910), or UlVpTrigTime6D(BSC6900,BSC6910) respectively.
ActionsWhen the link stability control function switch for videophone services(UlQosVpInterFreqHoSwitch(BSC6900,BSC6910)) is set to YES, the RNC triggers an inter-frequency handover measurement if it receives a report on event 6A1 or 6D. When the conditionsfor handover are met, the RNC hands over the UE to inter-frequency cells.
3.4.3 DL Stability ControlMeasurement
The DL stability control function for videophone services involves events Ea and Eb.Ea starts measurement for handover. Eb stops the measurement for handover.The time to trigger event E is specified by the parameter DlVpTrigTimeE(BSC6900,BSC6910). The reporting period of event E is specified by the parameterChoiceRptUnitForVpE(BSC6900,BSC6910), TenMsecForVpE(BSC6900,BSC6910), orMinForVpE(BSC6900,BSC6910).
ActionsWhen the link stability control function switch for videophone services(DlQosVpInterFreqHoSwitch(BSC6900,BSC6910)) is set to YES, the RNC triggers an inter-frequency handover measurement if it receives a report on event Ea. When the conditions forhandover are met, the RNC hands over the UE to inter-frequency cells.
WCDMA RANVideophone Feature Parameter Description 3 Technical Description
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
6
-
4 Related FeaturesPrerequisite Features
None
Mutually Exclusive FeaturesNone
Impacted Featuresl WRFD-020303 Inter-RAT Handover Based on Coveragel WRFD-020305 Inter-RAT Handover Based on Servicel WRFD-020306 Inter-RAT Handover Based on Loadl WRFD-021200 HCS (Hierarchical Cell Structure)
WCDMA RANVideophone Feature Parameter Description 4 Related Features
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
7
-
5 Network ImpactSystem Capacity
No impact.
Network PerformanceThis feature provides coverage gains, improving the experience of cell edge users (CEUs).
WCDMA RANVideophone Feature Parameter Description 5 Network Impact
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
8
-
6 Engineering GuidelinesThis section describes how to activate, verify, and deactivate the optional feature WRFD-020130Videophone Service Restriction.
WCDMA RANVideophone Feature Parameter Description 6 Engineering Guidelines
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
9
-
6.1 When to Use HSUPA Introduction PackageYou are advised to use this feature:l In the event of limited coverage to provide continuous callsl For restricted areas to avoid information leakage
6.2 Information to Be CollectedNone
6.3 Deployment
6.3.1 Requirementsl Dependencies on Hardware
This feature does not have any special requirements for hardware.l Dependencies on Other Features
This feature does not depend on other features.l License
The license " Videophone Service Restriction" on the RNC side has been activated. Fordetails about the license items and how to activate the license, see License ManagementFeature Parameter Description.
Feature ID Feature Name License Control Item NE Sales UnitWRFD-020130
VideophoneServiceRestriction
Videophone ServiceRestriction
RNC Erl
6.3.2 Data PreparationTable 6-1 lists the data to prepare before deploying Videophone Service Restriction.
Table 6-1 Data to prepare before deploying Videophone Service RestrictionParameter Name Parameter ID Setting Notes Data SourceCell VP Limit Indicator VPLimitInd
(BSC6900,BSC6910)
To activate this feature, setthe parameter to TRUE.
Radio Planning(Internalplanning)
WCDMA RANVideophone Feature Parameter Description 6 Engineering Guidelines
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
10
-
6.3.3 ActivationUsing MML Commands
Step 1 Run the RNC MML command DEA UCELL to deactivate the cell. In this step, set Cell ID toan appropriate value.
Step 2 Run the RNC MML command MOD UCELLSETUP. In this step, set Cell VP LimitIndicator to TRUE.
Step 3 Run the RNC MML command ACT UCELL to activate the cell. In this step, set Cell ID to anappropriate value.
Step 4 Run the RNC MML command MOD UEXT3GCELL on another RNC that controls theneighboring cell. In this step, set Cell VP Limit Indicator to TRUE.----End
MML Command Examples//Activating Videophone Service Restriction DEA UCELL: CellId=1111; MOD UCELLSETUP: CellId=1111, VPLimitInd=TRUE; ACT UCELL: CellId=1111; MOD UEXT3GCELL: NRncId=1, CellId=1111, VPLimitInd=TRUE;
Using the CMENOTE
When configuring the Videophone Service Restriction feature on the CME, perform a single configurationfirst, and then perform a batch modification if required. Configure the parameters of a single object beforea batch modification. Perform a batch modification before logging out of the parameter setting interface.
Step 1 Configure a single object (such as a cell) on the CME.Set the parameter described in Table 6-2 on the CME. For instructions on how to perform theCME single configuration, see CME Single Configuration Operation Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification wizard. Forinstructions on how to perform a batch modification through the CME batch modification center,press F1 on the wizard interface to obtain online help.----End
WCDMA RANVideophone Feature Parameter Description 6 Engineering Guidelines
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
11
-
Table 6-2 Configuring the parameter on the CMESN MO NE Parameter Name Parameter
IDConfigurable in CMEBatchModification Center
1 UCELL RNC Validationindication(Set this parameterto Activated.)
ACTSTATUS
Yes
2 UCELL RNC Cell VP LimitIndicator
VPLimitInd(BSC6900,BSC6910)
Yes
3 UCELL RNC Validationindication(Set this parameterto Deactivated.)
ACTSTATUS Yes
4 UEXT3GCELL
RNC Cell VP LimitIndicator
VPLimitInd(BSC6900,BSC6910)
Yes
6.3.4 Activation ObservationStep 1 Use two videophone capable UEs to camp on the same cell, and then use one UE to initiate a
videophone to the other UE.Step 2 Initiate Iu Interface Trace on the RNC LMT. The RNC sends an
RANAP_RAB_ASSIGNMENT_RSP message to the CN.----End
6.3.5 DeactivationUsing MML Commands
Step 1 Run the RNC MML command DEA UCELL to deactivate the cell. In this step, set Cell ID toan appropriate value.
Step 2 Run the RNC MML command MOD UCELLSETUP. In this step, set Cell VP LimitIndicator to FALSE.
Step 3 Run the RNC MML command ACT UCELL to activate the cell. In this step, set Cell ID to anappropriate value.
WCDMA RANVideophone Feature Parameter Description 6 Engineering Guidelines
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
12
-
Step 4 Run the RNC MML command MOD UEXT3GCELL on another RNC that controls theneighboring cell. In this step, set Cell VP Limit Indicator to FALSE.
----End
MML Command Example//Deactivating Videophone Service Restriction DEA UCELL: CellId=1111; MOD UCELLSETUP: CellId=1111, VPLimitInd=FALSE; ACT UCELL: CellId=1111; MOD UEXT3GCELL: NRncId=1, CellId=1111, VPLimitInd=FALSE;
Using the CMENOTE
When configuring the Videophone Service Restriction feature on the CME, perform a single configurationfirst, and then perform a batch modification if required. Configure the parameters of a single object beforea batch modification. Perform a batch modification before logging out of the parameter setting interface.
Step 1 Configure a single object (such as a cell) on the CME.Set the parameter described in Table 6-3 on the CME. For instructions on how to perform theCME single configuration, see CME Single Configuration Operation Guide.
Step 2 (Optional) Modify objects in batches on the CME. (CME batch modification center)
To modify objects in batches, click on the CME to start the batch modification wizard. Forinstructions on how to perform a batch modification through the CME batch modification center,press F1 on the wizard interface to obtain online help.
----End
Table 6-3 Configuring the parameter on the CMESN MO NE Parameter Name Parameter
IDConfigurable in CMEBatchModification Center
1 UCELL RNC Validation indication(Set this parameter toDeactivated.)
ACTSTATUS Yes
2 UCELL RNC Cell VP LimitIndicator
VPLimitInd(BSC6900,BSC6910)
Yes
3 UCELL RNC Validation indication(Set this parameter toactivated.)
ACTSTATUS Yes
WCDMA RANVideophone Feature Parameter Description 6 Engineering Guidelines
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
13
-
SN MO NE Parameter Name ParameterID
Configurable in CMEBatchModification Center
4 UEXT3GCELL RNC Cell VP LimitIndicator
VPLimitInd(BSC6900,BSC6910)
Yes
6.4 Performance MonitoringYou can check the following counters to check whether videophone services have beenprovisioned:l VS.VP.Erlang.BestCell (indicating the number of equivalent Erlang for videophone
services in a cell)l VS.VP.UL.Traffic.BestCell and VS.VP.DL.Traffic.BestCell (indicating the traffic volume
of videophone services in a cell)You can check the following counters to check whether Videophone Service Restriction iseffective:l VS.RAB.AttEstabCS.VPLimit (indicating the number of attempted CS VP RAB
establishments in a cell when videophone services are prohibited)l VS.RAB.AttEstabCS.VPLimit.RNC (indicating the number of attempted CS VP RAB
establishments under an RNC when videophone services are prohibited)l VS.RAB.NormRel.VPLimit (indicating the number of CS VP RABs released in a cell when
videophone services are prohibited)l VS.IU.RelReqCS.NetworkOpt (indicating the number of Iu connection release requests
under an RNC when videophone services are prohibited)You can check the following counter to check the number of videophone fallbacks to AMRunder an RNC:l VS.RAB.ModReqCS.VP.Fallback.RNC
6.5 Parameter OptimizationNone
6.6 TroubleshootingNone
WCDMA RANVideophone Feature Parameter Description 6 Engineering Guidelines
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
14
-
7 ParametersTable 7-1 Parameter description
Parameter ID NE MMLCommand
Feature ID Feature Name Description
VPLimitInd BSC6900 ADDUCELLSETUPMODUCELLSETUP
WRFD-020303WRFD-020130
Inter-RATHandover Basedon CoverageVideophoneServiceRestriction
Meaning:Whether a video phoneis barred in acell. If a videophone is allowedin a confidentialzone such as amilitaryexclusive zone,the phone can beused for shoot inthe confidentialzone. Therefore,the operator canreject videophone servicesin the cell byenabling theswitch.GUI ValueRange:TRUE,FALSEUnit:NoneActual ValueRange:TRUE,FALSEDefaultValue:False
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
15
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
VPLimitInd BSC6910 ADDUCELLSETUPMODUCELLSETUP
WRFD-020303WRFD-020130
Inter-RATHandover Basedon CoverageVideophoneServiceRestriction
Meaning:Whether a video phoneis barred in acell. If a videophone is allowedin a confidentialzone such as amilitaryexclusive zone,the phone can beused for shoot inthe confidentialzone. Therefore,the operator canreject videophone servicesin the cell byenabling theswitch.GUI ValueRange:TRUE,FALSEUnit:NoneActual ValueRange:TRUE,FALSEDefaultValue:False
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
16
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
UlVpTrigTime6A1
BSC6900 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Duration when themeasured valueof VP keepsfulfilling the6A1measurementcondition beforethe event 6A1 istriggered. Thetrigger time isused to preventthe suddenchange of themeasured valuefor beingreported.GUI ValueRange:D0, D10,D20, D40, D60,D80, D100,D120, D160,D200, D240,D320, D640,D1280, D2560,D5000Unit:msActual ValueRange:0, 10, 20,40, 60, 80, 100,120, 160, 200,240, 320, 640,1280, 2560,5000DefaultValue:D640
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
17
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
UlVpTrigTime6A1
BSC6910 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Duration when themeasured valueof VP keepsfulfilling the6A1measurementcondition beforethe event 6A1 istriggered. Thetrigger time isused to preventthe suddenchange of themeasured valuefor beingreported.GUI ValueRange:D0, D10,D20, D40, D60,D80, D100,D120, D160,D200, D240,D320, D640,D1280, D2560,D5000Unit:msActual ValueRange:0, 10, 20,40, 60, 80, 100,120, 160, 200,240, 320, 640,1280, 2560,5000DefaultValue:D640
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
18
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
UlVpTrigTime6B1
BSC6900 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Duration when themeasured valueof VP keepsfulfilling the6B1measurementcondition beforethe event 6B1 istriggered. Thetrigger time isused to preventthe suddenchange of themeasured valuefor beingreported.GUI ValueRange:D0, D10,D20, D40, D60,D80, D100,D120, D160,D200, D240,D320, D640,D1280, D2560,D5000Unit:msActual ValueRange:0, 10, 20,40, 60, 80, 100,120, 160, 200,240, 320, 640,1280, 2560,5000DefaultValue:D640
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
19
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
UlVpTrigTime6B1
BSC6910 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Duration when themeasured valueof VP keepsfulfilling the6B1measurementcondition beforethe event 6B1 istriggered. Thetrigger time isused to preventthe suddenchange of themeasured valuefor beingreported.GUI ValueRange:D0, D10,D20, D40, D60,D80, D100,D120, D160,D200, D240,D320, D640,D1280, D2560,D5000Unit:msActual ValueRange:0, 10, 20,40, 60, 80, 100,120, 160, 200,240, 320, 640,1280, 2560,5000DefaultValue:D640
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
20
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
UlVpTrigTime6D
BSC6900 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Duration when themeasured valueof VP keepsfulfilling the 6Dmeasurementcondition beforethe event 6D istriggered. Thetrigger time isused to preventthe suddenchange of themeasured valuefor beingreported.GUI ValueRange:D0, D10,D20, D40, D60,D80, D100,D120, D160,D200, D240,D320, D640,D1280, D2560,D5000Unit:msActual ValueRange:0, 10, 20,40, 60, 80, 100,120, 160, 200,240, 320, 640,1280, 2560,5000DefaultValue:D240
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
21
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
UlVpTrigTime6D
BSC6910 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Duration when themeasured valueof VP keepsfulfilling the 6Dmeasurementcondition beforethe event 6D istriggered. Thetrigger time isused to preventthe suddenchange of themeasured valuefor beingreported.GUI ValueRange:D0, D10,D20, D40, D60,D80, D100,D120, D160,D200, D240,D320, D640,D1280, D2560,D5000Unit:msActual ValueRange:0, 10, 20,40, 60, 80, 100,120, 160, 200,240, 320, 640,1280, 2560,5000DefaultValue:D240
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
22
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
UlQosVpInter-FreqHoSwitch
BSC6900 SETUQOSACT
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Inter-frequencyhandover switchof link stabilitycontrol for ULQoS of VPservices. Whenthe parameter isset to YES,inter-frequencyhandover can beperformed forVP services toensure the QoS.GUI ValueRange:NO, YESUnit:NoneActual ValueRange:NO, YESDefaultValue:NO
UlQosVpInter-FreqHoSwitch
BSC6910 SETUQOSACT
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Inter-frequencyhandover switchof link stabilitycontrol for ULQoS of VPservices. Whenthe parameter isset to YES,inter-frequencyhandover can beperformed forVP services toensure the QoS.GUI ValueRange:NO, YESUnit:NoneActual ValueRange:NO, YESDefaultValue:NO
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
23
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
DlVpTrigTimeE
BSC6900 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Duration from whenthe VP TXpower is beyondthe threshold Eaor below thethreshold Eb towhen the eventEa or Eb istriggered. Thisparameter isused to avoidfaulty reportingdue to instabilityof power.GUI ValueRange:1~6000Unit:10msActual ValueRange:10~60000Default Value:64
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
24
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
DlVpTrigTimeE
BSC6910 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Duration from whenthe VP TXpower is beyondthe threshold Eaor below thethreshold Eb towhen the eventEa or Eb istriggered. Thisparameter isused to avoidfaulty reportingdue to instabilityof power.GUI ValueRange:1~6000Unit:10msActual ValueRange:10~60000Default Value:64
ChoiceRptUnit-ForVpE
BSC6900 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Thisparameterspecifies thereporting periodof the event E ofthe VP service.The unit of thereporting periodcan be 10 ms orminute.GUI ValueRange:TEN_MSEC, MINUnit:NoneActual ValueRange:TEN_MSEC, MINDefaultValue:TEN_MSEC
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
25
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
ChoiceRptUnit-ForVpE
BSC6910 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Thisparameterspecifies thereporting periodof the event E ofthe VP service.The unit of thereporting periodcan be 10 ms orminute.GUI ValueRange:TEN_MSEC, MINUnit:NoneActual ValueRange:TEN_MSEC, MINDefaultValue:TEN_MSEC
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
26
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
TenMsecForVpE
BSC6900 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Thisparameter isvalid when thecorrespondingparameterrelated to thereporting periodunit for the eventE of VP serviceis set toTEN_MSEC.The DL code TXpower isreportedperiodicallyafter the eventEa is reported.This parameterspecifies thereporting period.If the parameteris set to A, thereporting periodis A x 10 ms.GUI ValueRange:1~6000Unit:10msActual ValueRange:10~60000Default Value:480
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
27
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
TenMsecForVpE
BSC6910 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Thisparameter isvalid when thecorrespondingparameterrelated to thereporting periodunit for the eventE of VP serviceis set toTEN_MSEC.The DL code TXpower isreportedperiodicallyafter the eventEa is reported.This parameterspecifies thereporting period.If the parameteris set to A, thereporting periodis A x 10 ms.GUI ValueRange:1~6000Unit:10msActual ValueRange:10~60000Default Value:480
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
28
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
MinForVpE BSC6900 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Thisparameter isvalid when thecorrespondingparameterrelated to thereporting periodunit for the eventE of VP serviceis set to MIN.The DL code TXpower isreportedperiodicallyafter the eventEa is reported.This parameterspecifies thereporting period.GUI ValueRange:1~60Unit:minActual ValueRange:1~60DefaultValue:None
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
29
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
MinForVpE BSC6910 ADDUCELLQUALITYMEASMODUCELLQUALITYMEAS
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Thisparameter isvalid when thecorrespondingparameterrelated to thereporting periodunit for the eventE of VP serviceis set to MIN.The DL code TXpower isreportedperiodicallyafter the eventEa is reported.This parameterspecifies thereporting period.GUI ValueRange:1~60Unit:minActual ValueRange:1~60DefaultValue:None
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
30
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
DlQosVpInter-FreqHoSwitch
BSC6900 SETUQOSACT
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Inter-frequencyhandover switchof link stabilitycontrol for DLQoS of VPservices. Whenthe parameter isset to YES,inter-frequencyhandover can beperformed forVP services toensure the QoS.GUI ValueRange:NO, YESUnit:NoneActual ValueRange:NO, YESDefaultValue:NO
DlQosVpInter-FreqHoSwitch
BSC6910 SETUQOSACT
WRFD-020304 Inter FrequencyHard HandoverBased on DLQoS
Meaning:Inter-frequencyhandover switchof link stabilitycontrol for DLQoS of VPservices. Whenthe parameter isset to YES,inter-frequencyhandover can beperformed forVP services toensure the QoS.GUI ValueRange:NO, YESUnit:NoneActual ValueRange:NO, YESDefaultValue:NO
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
31
-
Parameter ID NE MMLCommand
Feature ID Feature Name Description
VPLimitInd BSC6900 ADDUEXT3GCELLMODUEXT3GCELL
WRFD-020130 VideophoneServiceRestriction
Meaning:Indi-cates whetherthe videophone(VP) service islimited in a cell.When theindicator is"TRUE", itindicates that theVP service islimited in thecell.GUI ValueRange:TRUE,FALSEUnit:NoneActual ValueRange:TRUE,FALSEDefaultValue:False
VPLimitInd BSC6910 ADDUEXT3GCELLMODUEXT3GCELL
WRFD-020130 VideophoneServiceRestriction
Meaning:Indi-cates whetherthe videophone(VP) service islimited in a cell.When theindicator is"TRUE", itindicates that theVP service islimited in thecell.GUI ValueRange:TRUE,FALSEUnit:NoneActual ValueRange:TRUE,FALSEDefaultValue:False
WCDMA RANVideophone Feature Parameter Description 7 Parameters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
32
-
8 CountersTable 8-1 Counter description
Counter ID Counter Name CounterDescription
NE Feature ID Feature Name
67196232 VS.RAB.AttEstabCS.VPLimit
Number of64kbit/s CSRAB AttemptsInitiated in CellWhere 64kbit/sCSConversationalService isForbidden forCell
BSC6900 WRFD-020130 VideophoneServiceRestriction
67196233 VS.RAB.NormRel.VPLimit
Number of CSVP RABsReleased Due toVP Forbiddancefor Cell
BSC6900 WRFD-020130 VideophoneServiceRestriction
67196234 VS.IU.RelReqCS.NetworkOpt
Number of IURELEASEREQUESTMessages Sentby RNC to CN inCS Domain (VPForbiddance)
BSC6900 WRFD-020130 VideophoneServiceRestriction
WCDMA RANVideophone Feature Parameter Description 8 Counters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
33
-
Counter ID Counter Name CounterDescription
NE Feature ID Feature Name
67196235 VS.RAB.AttEstabCS.VPLimit.RNC
Number ofAttempted64kbit/s CSRABEstablishmentsin a Cell Where64kbit/s CSService isForbidden forRNC
BSC6900 WRFD-020130 VideophoneServiceRestriction
67196236 VS.RAB.NormRel.VPLimit.RNC
Number of64kbit/s CSRABs NormallyReleased forRNC Due to64kbit/s CSServiceForbiddance inTarget Cell
BSC6900 WRFD-020130 VideophoneServiceRestriction
67196232 VS.RAB.AttEstabCS.VPLimit
Number of64kbit/s CSRAB AttemptsInitiated in CellWhere 64kbit/sCSConversationalService isForbidden forCell
BSC6910 WRFD-020130 VideophoneServiceRestriction
67196233 VS.RAB.NormRel.VPLimit
Number of CSVP RABsReleased Due toVP Forbiddancefor Cell
BSC6910 WRFD-020130 VideophoneServiceRestriction
67196234 VS.IU.RelReqCS.NetworkOpt
Number of IURELEASEREQUESTMessages Sentby RNC to CN inCS Domain (VPForbiddance)
BSC6910 WRFD-020130 VideophoneServiceRestriction
WCDMA RANVideophone Feature Parameter Description 8 Counters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
34
-
Counter ID Counter Name CounterDescription
NE Feature ID Feature Name
67196235 VS.RAB.AttEstabCS.VPLimit.RNC
Number ofAttempted64kbit/s CSRABEstablishmentsin a Cell Where64kbit/s CSService isForbidden forRNC
BSC6910 WRFD-020130 VideophoneServiceRestriction
67196236 VS.RAB.NormRel.VPLimit.RNC
Number of64kbit/s CSRABs NormallyReleased forRNC Due to64kbit/s CSServiceForbiddance inTarget Cell
BSC6910 WRFD-020130 VideophoneServiceRestriction
WCDMA RANVideophone Feature Parameter Description 8 Counters
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
35
-
9 GlossaryFor the acronyms, abbreviations, terms, and definitions, see the Glossary.
WCDMA RANVideophone Feature Parameter Description 9 Glossary
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
36
-
10 Reference Documents1. 3GPP TS 26.111, "Modifications to H.324"2. 3GPP TS 26.110, "Codec for circuit switched multimedia telephony service, General
description"3. Handover Feature Parameter Description4. AMR Feature Parameter Description5. License Management Feature Parameter Description
WCDMA RANVideophone Feature Parameter Description 10 Reference Documents
Issue 01 (2013-04-28) Huawei Proprietary and ConfidentialCopyright Huawei Technologies Co., Ltd.
37
Contents1 About This Document1.1 Scope1.2 Intended Audience1.3 Change History
2 Overview3 Technical Description3.1 Radio Bearer Scheme3.2 Videophone Fallback to AMR3.3 VP Service Restriction3.4 Link Stability Control of Videophone3.4.1 Overview3.4.2 UL Stability Control3.4.3 DL Stability Control
4 Related Features5 Network Impact6 Engineering Guidelines6.1 When to Use HSUPA Introduction Package6.2 Information to Be Collected6.3 Deployment6.3.1 Requirements6.3.2 Data Preparation6.3.3 Activation6.3.4 Activation Observation6.3.5 Deactivation
6.4 Performance Monitoring6.5 Parameter Optimization6.6 Troubleshooting
7 Parameters8 Counters9 Glossary10 Reference Documents