VICTORY - Pigs Can Fly! · two-piece ForK mounts our sturdy chrome-plated mounts are just the...
Transcript of VICTORY - Pigs Can Fly! · two-piece ForK mounts our sturdy chrome-plated mounts are just the...
VICTORY
audio 7LiGHtinG 7
HandLeBar controLs 9Foot controLs 10
covers, trims & accents 11tourinG & comFort 14
Find more accessories For your victory in muLti-Fit
89
Found in this Section:
fOR
3
CROSS COUNTRYfOR
mirrors 112 audio 7
HandLeBar controLs 9Front end LiGHtinG 7
covers, trims & accents 11Foot controLs & cruise peGs 10
5
waTch www.kuryakyn.com for morE informaTion & rElEasE daTEsproducts are patent pending
14
11
w w w . k u r y a k y n . c o m 8 6 6 . 2 7 7 . 9 5 9 86
Sneak PeakNew Accessories for Victory in the Works
KicKer Kps52504 4 oHm speaKersweather-proof, high-efficiency coaxials specifically created as fairing drop-ins or as replacements for rear speakers on victory bikes equipped with stock speakers. Extremely powerful, these 4 ohm speakers are lighter than anything on the market. spEakEr spEcs
• woofer: 5.25”• Tweeter: 3/4”• max recommended amp power (peak/rms): 100w/50w• weight: 12.6 oz
fits: all victory vision, cross country & cross country Tour modelsnote: some applications may require longer screws (not included).
874 kicker kps52504 4 ohm speakers (set)
No Strings Attached!
7” HeadLampreplacement bulbs can
be found in our multi-fit section, page 98.
2147 fits: victory v92c/dc/Tc/sc with 7” headlamp (ea)
note: use of high power (100w) bulbs is not recommended & will void warranty.
90
enGine Guard mounted drivinG LiGHtsfeaturing 3” doT approved lights & 1-1/4” clamps, they bolt on with ease. wiring & adding a switch is simple with our wiring relay kits (p/n’s 2202 or 2328 – sold separately, page 93).
fits: universal for mounting on 1-1/4 inch Engine Guards, (mount above, below, or anywhere on bar with 1-1/2” of strait engine guard. clamp & lights rotate for limitless adjustment)
5019 3” Engine Guard mounted driving lights (pr)
note: not typically compatible with fairing lowers replacement bulbs - see multi-fit lighting.
mounT on Top of EnGinE
Guard or bElow
ThE sound of chromEnow bluETooTh EnablEd!
audio
liGhTinG
accEssorymounTs
GauGEs &insTrumEnTs
handlEbarconTrols
fooTconTrols
covErs,Trims &accEnTs
luGGaGE
pErformancE
ThE shop
multi-fit
victory > audio & lighting 7
vict
ory
accessories forvictory
Lighting
Audio
Lighting
Audio
two-piece ForK mountsour sturdy chrome-plated mounts are just the ticket to attach constellation driving lights, silver bullets or custom lights using 5/16” mounting hardware to fork tubes.
2275 54mm/58mm Two-piece fork mounts for inverted forks (pr)
fits: hammer, kingpin & cross country
consteLLation drivinG LiGHtswith turn signals patent pending
with doT approved h-3 bulbs in a 3” diameter stretched bullet housing that flows down to a coordinating 2-1/4” turn signal housing, these are the answer to exceptional front lighting. wiring & adding a switch is simple with our wiring relay kits (p/n’s 2202 or 2328 – sold separately, page 93), found in the multi-fit section.
fits: universal applications for installation with küryakyn Two-piece clamps (sold separately - below)not intended for use with motorcycles that have oem fork shrouds, models with fairings or victory cross country.
5009 constellation driving lights with Turn signals (set)
note: turn signals have smoked lenses with amber bulbs.
rEplacEmEnT bulbs (p/n 5035, 2229, 2214 & 4813) can bE found in ThE mulTi-fiT sEcTion, paGE 91 & 99
conTrol in ThE palm of your handswirElEss rEmoTE conTrol
painT ThE niGhTwiTh 7 colorlizard® liGhTs
Add Some Color!
Add More!
silvEr bullETs (p/n 2319), mounTEd wiTh Two-piEcE fork mounTs (p/n 2275) work GrEaT for ExTra drivinG liGhTs on your cross counTry!
find ThEm in our mulTi-fiT sEcTion
100
add a Trim of color skinni mini Tm
Full Line of Grip AccessoriespaGE 108
w w w . k u r y a k y n . c o m 8 6 6 . 2 7 7 . 9 5 9 88
iso®-Gripsu.s. patent d411,432
combining great style & comfort, these grips provide a soft, non-slip surface that dampens operating vibration. recessed area between the iso-pads permit air movement for comfort in hot weather.
iso®-FLame Gripsfeaturing a unique flamed pattern in the soft & cushy raised rubber pads & finished off with a maltese cross emblazoned end cap & smooth trim ring.
transFormer™ Gripsu.s. patent d631,725
Transform the look & feel of your ride! bright chrome grip bodies & sculpted end caps provide a solid feel while contrasting soft black rubber inlays absorb vibration. interchangeable widow, zombie or maltese cross Emblems.note: accepts all grip end accessories except accent rings. will only accept smooth accent rings for transformer grips (p/n 6364).
i s o ®
B L a c K i s o ®
t r a n s F o r m e r ™
i s o ®-F L a m e
vicTory yr isoblack
isoiso
flamE TransformEr all models (except vision) all 6235 6345 6261 6233
note: kuryakyn grips are compatible with aftermarket internal bar-style heated grips. not compatible with oem heated grips where heat element is in the grip.
Mirror-MountedAccessories
cruise-matemotorcycLe tHrottLecruise assistlock the throttle simply by a ¼ turn of the lever. made of aircraft grade materials, durability is a cut above the rest. The cleverly designed spring loaded spline makes fine tuning easy.fits: ’08-’13 victory models (except with cruise controls beneath switch housing)
6396 chrome (ea)
6395 black (ea)
fits: ’98-’07 victory models
6394 chrome (ea)
6393 black (ea)
note: installation requires drilling (21/64”) and tapping (3/8”-24 tap) the control housing. these tools are not included, but a drill bit and tap kit (p/n 6399 – below) is available if needed – sold separately.
TEch-connEcTTm 102
service parts For cruise-matesdrill bit & tap, for installation
6399 21/64” drill bit and 3/8”-24 Tap kit (ea)
includEs drill fixTurEs for
Easy Installation!
Full Line of Grip AccessoriespaGE 108
6394 6393
audio
liGhTinG
accEssorymounTs
GauGEs &insTrumEnTs
handlEbarconTrols
fooTconTrols
covErs,Trims &accEnTs
luGGaGE
pErformancE
ThE shop
multi-fit
victory > handlebar controls 9
vict
ory
Handlebar ControlsHandlebar Controlsaccessories for
victory
cruise peGsfor victory down tube mount
The answer for installing highway pegs on the frame down tubes of your victory. The right angle design allows the peg to be positioned for easy reach and long lasting comfort. keep the look of your sport cruiser clean and uncluttered, while adding additional over the road luxury. Everything you need all in one kit.
fits: all ‘03-’13 victory cruisers with 1-1/2” front down Tubes (note: not for use with engine guards or models with shrouded front down tubes)
7559 cruise pegs for front down Tubes (pr)
kuryakyn floorboards and foot pegs feature a two part mounting system allowing you to choose the right style for the right bike. depending on the style you choose, each floorboard or foot peg will require either a splinEd or TapErEd adapter (sold in pairs). Throughout the book, floorboards and foot pegs are identified by a symbol next to each style indicating whether it requires a splined or tapered adapter. use the chart below to determine the right adapter for your application.
note: motorcycle specific adapters only work with stock oem peg mounts.
sold in pairs
FootpeG adapters
vicTory yEar front rear front rear
hammer all 8805 8805 8828 8828
vegas, 8-ball, Jackpot all 8805 8805 8828 8828
kingpin* all none 8805* none 8828
cross roads all none 8805 none 8828
cross country all none 8805 none 8828
high-ball all 8805 none 8828 none
hard-ball all none 8805 none 8828
Judge all 8805 8805 8828 8828
boardwalk all none 8805 none 8828
*only if using accessory mounts from victory
TapErEd splinEd
Pegs & Floorboards
114
123
Select a Footpeg or Floorboard (pG 114) and Mount it with an Adapter!
w w w . k u r y a k y n . c o m 8 6 6 . 2 7 7 . 9 5 9 810
Foot ControlsFoot Controls
iso®-sHiFt & BraKe peGsThis classy looking peg replaces the stock rubber shift or brake pegs on several victory models.
fits: ’04-’12 victory kingpin models, '10-'13 cross roads, cross country & Tour, all vision, boardwalk & hard ball models
8856 iso-shift or brake peg – long (ea)
BraKe pedaL coverfits: victory: ’09-’13 hammer & s, ’09-’13 Jackpot, ’09-’12
kingpin low, ’09-’13 ness Jackpot, ’03-’06 Touring cruiser,
all v92dc models, all v92Tc models, ’99-’03 v92c models
4037 brake pedal cover (ea)
FairinG eyeBrows for victory cross country
break away from the pack and add an elegant, modern look to your fairing. installation is simple, just peel-&-stick. made of high quality, lightweight chrome plated abs.
fits: all cross country & cross country Tour models
7691 chrome Eyebrows (pr)
saddLeBaG Front KicK accentsprevent those unsightly saddlebag scuff & scratches or cover up ones that are already there. not only do these offer protection, but also look great by offering just the right amount of contrast with black rubber inlayed with brilliant chrome. installation is hassle free just peel-&-stick.
fits: all cross country, cross country Tour & hard-ball models (also fits cross roads with oEm hard saddlebags)
7692 saddlebag front kick accents (pr)
7692
7692
7691
rendering shown
rendering shown
patent pending
patent pending
audio
liGhTinG
accEssorymounTs
GauGEs &insTrumEnTs
handlEbarconTrols
fooTconTrols
covErs,Trims &accEnTs
luGGaGE
pErformancE
ThE shop
multi-fit
victory > foot controls & covers, trims & accents 11
vict
ory
accessories forvictory
Covers, Trims & AccentsCovers, Trims & Accents
speedometer visor Easily affixes to the speedometer, with a reduced glare if you run a windshield!
4015 fits: all ‘04-’10 cruiser models (Jackpot, kingpin, vegas, hammer) with digital gauge (except vision)
BraKe BLeeder screw & BanJo BoLt covers used by themselves or as a complement, these little
jewels transform the unfinished bleeder screws and banjo bolts into
glistening chrome.
2062 brake & clutch banjo bolt cover (set)fits: all victory models (except vision)
2064 bleeder screw cover (ea) fits: all victory models
a
d
b
c
Cruise Pegs (pG 10)
w w w . k u r y a k y n . c o m 8 6 6 . 2 7 7 . 9 5 9 812
b. smootH vupdate you victory side covers with a smooth chrome look that’ll really stand out.
7685 fits: '03-'13 victory models with v shaped covers between cylinders (fits both left & right side) (pr)
note: does not fit Judge or boardwalk models
c. rouLette Horn coverretains the sound & improves the look on horns mounted between the frame down tubes.
7689 fits: all '04-'13 victory vegas, kingpin, hammer, Jackpot, 8 ball & universal for '04-'13 models with horn mounted at neck between front down tubes (ea)
L.e.d. Laydown curved License pLate
This curved plate frame features l.E.d. backlighting & a 15 degree mounting angle
that flows with the lines on your bikes rear fender.
fits: '10-'13 victory cross roads, cross country/Tour, hard-ball & universal applications. bolts to flat plate mount (widest mounting slot is 5" wide) for 4"x7" plate
7688 laydown curved license plate frame (ea)
compliant with fmvss#571.108 & marked sae dot l 11.
rear BraKe reservoir coversfits: '10-'13 victory cross roads, cross country & cross country Tour
7822 rear brake reservoir cover (ea)
cLutcH arm cover featuring a gear tooth design & simple bolt on installation.
7686 fits: all '06-'13 victory models, cruisers & Touring (ea)
d. cHrome dipsticK cover This chrome dipstick cover features a gear tooth design that looks great & retains the functionality of stock. installation is quick & easy to get you back on the road in no time.
7682 fits: all '06-'13 victory models, cruisers & Touring (ea) note: only for 100" or 106" motors.
a. enGine cam adJuster BoLt covercover those unsightly cam adjuster bolts with these great looking, gear tooth designed accents. Engineered exclusively for the victory motor, these covers bolt on & coordinate with all the victory chrome engine accents.
7684 fits: all '06-'13 victory models, cruisers & Touring (pr)
audio
liGhTinG
accEssorymounTs
GauGEs &insTrumEnTs
handlEbarconTrols
fooTconTrols
covErs,Trims &accEnTs
luGGaGE
pErformancE
ThE shop
multi-fit
victory > covers, trims & accents 13
vict
ory
accessories forvictory
muLti-purpose driver & passenGer BacKrestwith luggage rack patent pending
introducing the first, truly multi-purpose backrest & luggage rack system only available from küryakyn. once installed, no tools are needed for adjustments making the switch from rider to passenger backrest a snap.Enjoy those longer rides, & with the incorporated luggage rack, carrying all your stuff just got a whole lot easier.
• Truly multi-purpose – provides driver or passenger backrest along with a convenient luggage rack that can be used in either position.
• Sturdy aluminum main frame, steel folding luggage rack with rubber inserts, & comfortably padded backrest.
• Extremely versatile – backrest converts from driver to passenger without tools in seconds.
• Backrest pad is fully adjustable via stainless sliding rods with push-button locks & knurled threaded knobs.
1660 chrome (ea)
1661 black & chrome (ea)
note: requires mounting straps (below)
mounTinG sTraps for mulTi-purposE backrEsT
1659 fits: all ‘10-’13 cross country (except Tour) & hard-ball models (also fits cross roads with oEm hard saddlebags) (pr)
muLti-racK adJustaBLetrunK LuGGaGe racK designed to fit virtually any tour trunk thanks to the ingenious adjustable mounting stand offs, this luggage rack can conform to any trunk lid whether flat or curved. features include a chrome ½” tubular design that allows for the use any common flag holder if desired, as well as handy built in corner loops to keep your luggage secure. also included in the kit, a pair of mounting extensions for trunk lids with a steep downward rear swoop or with a trunk lid spoiler installed.
dims: 21” wide x 12” long
7159 fits: all cross country Tour Trunks (ea)
Revolutionary Product !
fully adJusTablE backrEsT pad - up &
down & back & forTh
rendering shown
1660
7159
1659
passEnGEr posiTion
drivEr posiTion
w w w . k u r y a k y n . c o m 8 6 6 . 2 7 7 . 9 5 9 814
Touring & ComfortTouring & Comfort
1661
1661