Vibratory Sieves

The ‘Sievmaster Easilift’ station is a clean and simple means of check sieving into bins or containers. Most bag dumping units require an operator to lift the hood manually to gain full access to the sieve unit. The Easilift has a flip top hood which is assisted so there is no lifting required to open the unit. The hood is also designed to take a 25kg bag across its length making it easier to split and tip the contents into the sieve below.

The Sievmaster Slimline and Multiscreen 602, 802, 1002, 1202 and 1502 vibratory sieving range will provide users with an economic means of sieving almost any wet or dry product into as many as 5 grades (4 screens). These fully adjustable machines provide three dimensional vibrations to quickly sieve/grade nearly all types of materials. The unique mesh de-blinding system and optional ultrasonic system provides screening of those more difficult products.

Multideck Sieve

Slimline Sieve

Check sieving from sacks or containers

Mobile units available

Easy and quick to clean

Metal detectable gaskets

Magnets

Sieving into tote bins, drums or mixer bowls

Flour, sugar, spices, cosmetics, seeds, almost any powder or granulated material

Changeable meshes

Salt | Lactose | Calcium Carbonate | Sugar | Coffee | Starch | Flour | Sand | Granules | Cement | Milk Powder

Process Equipment

Centrifugal Sifters

Sieve & lump break in one action

FDA approved materials of construction

Low maintenance/running costs

Quick change screens - nylon, stainless & wedgewire

Easy clean design, internal parts removable with no tools

Meets HACCP, BRC audit requirements

No vibration - smooth running

All stainless steel contact parts

Inlet screw feed

The ‘Sievmaster Rota’ series gives accurate material screening with continuous fine and coarse discharge. The sieving area consists of a mesh cylinder and a paddle blade arrangement revolving within. The product is pushed against the mesh forcing the fine product through and retaining the coarse. Coarse product is ejected at the end of the machine and the fines discharged through the base of the main body. The machine is especially suitable for high volume sieving, lumpy, sticky and dusty products.

Flocculant | Titanium Dioxide | Activated Carbon | Fly Ash | Lime | Concentrates | Magnesium Oxide | Bentonite

Quick change screen

Paddle blades

Process Equipment

Lump Breakers

Single-shaft with flexible elastic coupling

Mixers

The Rotary Lump Breaker is designed to break up friable lumps and agglomerates in dry powders and granules. Lump breakers are commonly used to process powders prior to pneumatic conveying, sifting, blending and feeding, and may be installed in bag dump chutes, ducts and conveying systems. On some products, lump breakers may even be used for controlled size reduction. The Kockums rotary lump breaker has been success-fully applied in industries such as Food, Dairy, Confectionery, Chemical, Fertilisers, Plastics and Gypsum.

PTFE seals for bearings

Various surface treatment for blades

Mild steel, 304 S/S or 316 S/S

Easily disassemble blades for service

Mixers and Blenders are available in paddle, plough shear and ribbon type configurations for dry mixing applications. Ideal for homogenous dry ingredient batch type mixing applications with capacities ranging from 100 to 13,000 litres.

Continuous & batch applications

Carbon steel, SS304, SS316(Ti)

Gentle but fast mixing

‘Bomb door’ outlets for quick discharge

Wear resistant liners

Spray bar for liquid addition

Heating and cooling jackets

De-lumping whizzers

Twin-shaft lump breaker

ModelApprox Capacity

(m³/h)

RGM.3/3

RGM.5/5

RGM.8/5

30

90

145

Nickel Concentrate | Propellant | Carbon Black | Cocoa | Ammonium Nitrate | Clay | Zinc Oxide | Iron Oxide

Process Equipment

Flexible Wall Feeders

Recipe Batching System

The AUTOFLEX Flexible Wall Screw Feeder is ideal for control-ling accurate feed of granules and dry powders, in particular those that are non-free flowing like Titanium Dioxide, Calcium Carbonates, Bakery Ingredients, Clays, Oxides, Pigments and Perlite. This high performance screw feeder with its flexible wall urethane hopper and external massage system promotes reliable and repeatable flow. The gentle massaging action prevents rat-holes and bridges from forming.

Recipe batching systems may be as simple as a single ingredient addition or complete multi ingredient recipes, normally driven by a batch weigh indicator or central SCADA system. Individual ingredient characteristics, rates and accuracies are considered when selecting the most suitable feed system from a range of gravity, screw, belt or vibratory type solutions. Batching can be achieved volumetrically (time), by Loss of Weight (LOW), or Gain in Weight (GIW).

Model Capacity (litres/hr)

23F

150F

450F

1,350

9,000

27,500

Diatomaceous Earth | Graphite | Feldspar | Fluoride | Limestone | Gypsum | Magnesia | Lead Oxide | Resin

Single ingredient batching Multi ingredient batching Weigh belt feed system

Process Equipment

Concept Design & Testing

Engineering Design & Build

Install, Commission& Train

After Sales Support & Spares

From a project’s infancy Kockums can quickly and accurately provide concept designs and budget pricing for capital approval. At this early stage material trials are often under-taken at our Melbourne facility to help confirm solution selection.

Our In-house design engineering team design all equipment in compliance with Australian Standards and meeting our customers expectations. The Kockums Brand is well known for its “built to last” reputation and often unique approach.

Kockums offers installa-tion, commissioning and operator training. Equipment is fully assembled and tested prior to commissioning by experienced engineers to ensure optimum performance and efficiency.

Kockums has a trained service team providing spares and nationwide support to our clients. Every installation requires something different and our partnership program allows us to work with individual customers to determine the most effective level of support.

139 - 143 Bamfield Road, Heidelberg West, Vic 3081 Phone: +61 (3) 9457 8200 Fax: +61 (3) 9457 7695Email: sales@kockumsbulk.com.auwww.kockumsbulk.com.au

Bag Handling Bulk Bag & IBC Handling Mechanical Conveying Pneumatic Conveying

Process Equipment Bagging Machines Palletising & Wrapping Case & Carton Packaging

Vacuum Lifting Cranes Accessories Partner Support